Oxidized Palladium Supported on Ceria Nanorods for Catalytic Aerobic Oxidation of Benzyl Alcohol to Benzaldehyde in Protic Solvents

{Ru(C6 H6 )}-Decorating Heteropolymolybdate for Highly Activity Photocatalytic Oxidation of Benzyl Alcohol to Benzaldehyde

An unclassical structure of {Ru(C6 H6 )}-based polyoxometalate, Cs6 H4 [Te2 Mo12 O46 {Ru(C6 H6 )}] ⋅ 16.5H2 O (1), has been successfully constructed from {Te2 Mo12 O46 }-type heteropolymolybdate and {Ru(C6 H6 )} group, which structure type was discovered for the first time. Compound 1 not only possesses strong light-harvesting ability, but also exhibits high carrier separation efficiency and lower charge transfer resistance. Under visible light irradiation, compound 1 displayed excellent catalytic activity and circularity in the conversion of benzyl alcohol to benzaldehyde (yield=94 %; turnover number=500; turnover frequency=20.8 h-1 ). Finally, the electron paramagnetic resonance measurement and energy level matching analysis provide theoretical basis for the derivation of the reaction mechanism.

Dry Reforming of Methane on Ni/Nanorod-CeO2 Catalysts Prepared by One-Pot Hydrothermal Synthesis: The Effect of Ni Content on Structure, Activity, and Stability

The nanorod morphology of the CeO2 support has been recognized as more beneficial than other morphologies for catalytic activity in the dry reforming of methane. Ni/nanorod-CeO2 catalysts with different Ni contents were prepared by one-pot hydrothermal synthesis. Samples were characterized by X-ray diffraction (XRD), H2-temperature-programmed reduction (H2-TPR), H2-temperature-programmed desorption (H2-TPD), field emission scanning electron microscopy/energy dispersive spectroscopy (FE-SEM/EDS), Brunauer–Emmet–Teller (BET) and Barrett–Joyner–Halenda (BHJ) analysis. The effect of Ni content on the size and the intrinsic strain of ceria was analyzed by the Size–Strain plot and Williamson–Hall plot of XRD data. The average Ni particle size and Ni dispersion were determined by H2-TPD. XRD and H2-TPR analysis revealed a strong Ni–support interaction that limited nickel sintering. The activity for the dry reforming of methane was tested with the stoichiometric mixture CO2:CH4:N2:He = 20:20:20:140, gas hourly space velocity (GHSV) = 300 L g−1 h−1, and temperatures in the range of 545–800 °C. The turnover frequency (TOF) value increased linearly with the average Ni particle size in the range of 5.5–33 nm, suggesting the structure sensitivity of the reaction. Samples with Ni loading of 4–12 wt.% showed high H2/CO selectivity and stability over time on stream, whereas the sample with a Ni loading of 2 wt.% was less selective and underwent rapid deactivation. Only a small amount of nanotubular carbon was observed by FE-SEM after the time-on-stream experiment. Deactivation of the low-Ni-content sample is ascribed to the easier oxidation of the small Ni particles.

Transforming Waste Clamshell into Highly Selective Nanostructured Catalysts for Solvent Free Liquid Phase Oxidation of Benzyl Alcohol

High yield production of benzaldehyde in the solvent-free oxidation of benzyl alcohol by using green catalysts is highly desirable. In this work, calcium hydroxide derived from waste clamshell was used as low-cost and environmentally friendly catalyst support (CaSUP) for Pd and V nanoparticles. The physicochemical properties of the catalysts were analyzed using X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) technique, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic oxidation of benzyl alcohol to benzaldehyde was studied in a liquid phase reaction by using H2O2 as an oxidizing agent. The effects of catalyst loading, the molar ratio of hydrogen peroxide to benzyl alcohol, temperature and reaction duration were investigated. In the optimized conditions, Pd nanoparticles supported on clamshell-derived supports displayed excellent catalytic conversion (88%) and selectivity to benzaldehyde (89%). Furthermore, the catalyst can be effectively reused without a significant loss in its activity and selectivity. The high yield and stability can be related to the structural and basic properties of the catalyst. These results provide important insights into the benzyl alcohol oxidation process for industrial applications.

A Novel Pd-P Nano-Alloy Supported on Functionalized Silica for Catalytic Aerobic Oxidation of Benzyl Alcohol

Catalytic aerobic oxidation of benzyl alcohol (BnOH) to benzaldehyde (PhCHO) over supported noble metal catalysts has grabbed the attention of researchers due to the critical role of PhCHO in numerous industrial syntheses. In the present study, a novel catalyst, Pd-P alloy supported on aminopropyl-functionalized mesoporous silica (NH2-SiO2), was prepared through in situ reduction and characterized by BET-BJH analysis, SEM, TEM, XRD, FTIR, TG-DTA, and XPS. Chemical properties and catalytic performance of Pd-P/NH2-SiO2 were compared with those of Pd° nanoparticles (NPs) deposited on the same support. Over Pd-P/NH2-SiO2, the BnOH conversion to PhCHO was much higher than over Pd°/NH2-SiO2, and significantly influenced by the nature of solvent, reaching 57% in toluene at 111 °C, with 63% selectivity. Using pure oxygen as an oxidant in the same conditions, the BnOH conversion increased up to 78%, with 66% selectivity. The role of phosphorous in improving the activity may consist of the strong interaction with Pd that favours metal dispersion and lowers Pd electron density.

One-Pot Synthesis of Ni0.05Ce0.95O2−δ Catalysts with Nanocubes and Nanorods Morphology for CO2 Methanation Reaction and in Operando DRIFT Analysis of Intermediate Species

The valorization of CO2 via renewable energy sources allows one to obtain carbon-neutral fuels through its hydrogenation, like methane. In this study, Ni0.05Ce0.95O2−δ catalysts were prepared using a simple one-pot hydrothermal method yielding nanorod and nanocube particles to be used for the methanation reaction. Samples were characterized by XRD, BET, TEM, H2-TPR, and H2-TPD experiments. The catalytic activity tests revealed that the best performing catalyst was Ni0.05Ce0.95O2−δ, with nanorod morphology, which gave a CO2 conversion of 40% with a selectivity of CH4 as high as 93%, operating at 325 °C and a GHSV of 240,000 cm3 h−1 g−1. However, the lower activation energy was found for Ni0.05Ce0.95O2−δ catalysts with nanocube morphology. Furthermore, an in operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis was performed flowing CO2:H2 or CO:H2 mixture, showing that the main reaction pathway, for the CO2 methanation, is the direct hydrogenation of formate intermediate.

A Simple Cerium Coating Strategy for Titanium Oxide Nano-tubes' Bioactivity Enhancement

Despite the well-known favorable chemical and mechanical properties of titanium-based materials for orthopedic and dental applications, poor osseointegration of the implants, bacteria adhesion, and excessive inflammatory response from the host remain major problems to be solved. Here, the antioxidant and anti-inflammatory enzyme-like abilities of ceria (CeO_x) were coupled to the advantageous features of titanium nanotubes (TiNTs). Cost-effective and fast methods, such as electrochemical anodization and drop casting, were used to build active surfaces with enhanced bioactivity. Surface composition, electrochemical response, and in vitro ability to induce hydroxyapatite (HA) precipitation were evaluated. The amount of cerium in the coating did not significantly affect wettability, yet a growing ability to induce early HA precipitation from simulated body fluid (SBF) was observed as the oxide content at the surface increased. The presence of 4%wt CeO_x was also able to stimulate rapid HA maturation in a (poorly) crystalline form, indicating an interesting potential to induce rapid in vivo osseointegration process.

Monodisperse-porous cerium oxide microspheres as a new support with appreciable catalytic activity for a composite catalyst in benzyl alcohol oxidation

Monodisperse porous ceria microspheres as a support with individual catalytic activity, facile post-functionalization and high surface area for heterogeneous catalysis.

Eco-Friendly and Solvent-Less Mechanochemical Synthesis of ZrO2–MnCO3/N-Doped Graphene Nanocomposites: A Highly Efficacious Catalyst for Base-Free Aerobic Oxidation of Various Types of Alcohols

In recent years, the development of green mechanochemical processes for the synthesis of new catalysts with higher catalytic efficacy and selectivity has received manifest interest. In continuation of our previous study, in which graphene oxide (GRO) and highly reduced graphene oxide (HRG) based nanocomposites were prepared and assessed, herein, we have explored a facile and solvent-less mechanochemical approach for the synthesis of N-doped graphene (NDG)/mixed metal oxide (MnCO3–ZrO2) ((X%)NDG/MnCO3–ZrO2), as the (X%)NDG/MnCO3–ZrO2 nano-composite was synthesized using physical grinding of separately synthesized NDG and pre-calcined (300 °C) MnCO3–ZrO2 via green milling method. The structures of the prepared materials were characterized in detail using X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-Ray Analysis (EDX), Fourier-transform infrared spectroscopy (FTIR), Raman, Thermogravimetric analysis (TGA), and N2 adsorption-desorption isotherm analysis. Besides, the obtained nanocomposites were employed as heterogeneous oxidation catalyst for the alcohol oxidation using green oxidant O2 without involving any surfactants or bases. The reaction factors were systematically studied during the oxidation of benzyl alcohol (PhCH2OH) as the model reactant to benzaldehyde (PhCHO). The NDG/MnCO3–ZrO2 exhibits premium specific activity (66.7 mmol·g−1·h−1) with 100% conversion of PhCH2OH and > 99.9% selectivity to PhCHO after only 6 min. The mechanochemically prepared NDG based nanocomposite exhibited notable improvement in the catalytic efficacy as well as the surface area compared to the pristine MnCO3–ZrO2. Under the optimal circumstances, the NDG/MnCO3–ZrO2 catalyst could selectively catalyze the aerobic oxidation of a broad array of alcohols to carbonyls with full convertibility without over-oxidized side products like acids. The NDG/MnCO3–ZrO2 catalyst were efficiently reused for six subsequent recycling reactions with a marginal decline in performance and selectivity.

Nanoceria-modified platinum supported on hierarchical zeolites for selective alcohol oxidation

The highly selective oxidation of alcohols to aldehydes has been achieved due to the synergic effect of Pt and CeO2 supported on hierarchical zeolites. The combination of Pt and CeO2 strongly enhances the catalytic performance of the oxidation of benzyl alcohol to benzaldehyde with respect to the isolated materials. In addition, the hierarchical zeolite not only increases the fraction of exposed active sites because of its high surface area that can prevent the aggregation of Pt and CeO2 nanoparticles, but also affects the oxidation state of cerium. The presence of a high content of trivalent Ce species (Ce3+) on the hierarchical zeolite benefits the oxidation reaction, eventually leading to almost 100% yield of an aldehyde product. Moreover, the catalytic performance can be further improved by the easily tunable Si to Al ratio of zeolite catalysts.