Recent Microfluidic Innovations for Sperm Sorting

High-throughput selection of sperm with improved DNA integrity and rapidly progressive motility using a butterfly-shaped chip compared to the swim-up method

Microfluidics provides unique opportunities for the high throughput selection of motile sperm with improved DNA integrity for assisted reproductive technologies (ARTs). Here, through a parametric study on dimensions and geometrical angles, a butterfly-shaped chip (BSC) is presented to isolate sperm with high progressive motility and intact DNA at a separation rate of 1125 sperm per minute. Using finite element simulations, the flow field and shear rates in the device were optimized to leverage the inherent motility characteristics of sperm for maximum selection throughput. The device incorporates a triple selection mechanism in series, initially activating sperm rheotaxis by rotation against the semen flow, penetrating the counter buffer flow and swimming against the direction of the buffer flow, leaving dead cells and debris behind, and subsequently leveraging boundary-following behavior to direct progressively motile sperm to swim along the walls and reach the device outlet. The device selects over 4.1 million sperm per mL within 20 minutes, with 29.2%, 68.2%, and 57.3% improvement in total motility, DNA integrity, and velocity parameter (VCL), as compared with the conventional swim-up method, respectively. Overall, the performance of the device to separate sperm with approximately 95.9% total motility, 97.8% viability, and 96.6% DNA integrity at high concentrations demonstrates its potential for enhancing the efficiency of conventional treatment methods.

Development of a thermotaxis and rheotaxis microfluidic device for motile spermatozoa sorting

Male infertility is a pervasive global reproductive challenge, primarily attributed to a decline in semen quality. Addressing this concern, there has been a growing focus on spermatozoa sorting in assisted reproductive technology. This study introduces a groundbreaking development in the form of a thermotaxis and rheotaxis microfluidic (TRMC) device designed for efficient motile spermatozoa sorting within a short 15-min timeframe. The TRMC device mimics the natural sperm sorting mechanism of the oviduct, selecting spermatozoa with superior motility and DNA integrity. The experimental outcomes demonstrate a remarkable enhancement in the percentage of progressive spermatozoa following sorting, soaring from 3.90% to an impressive 96.11% when subjected to a temperature decrease from 38 °C to 35 °C. Notably, sperm motility exhibited a substantial 69% improvement. The TRMC device exhibited a commendable recovery rate of 60.93%, surpassing current clinical requirements. Furthermore, the sorted spermatozoa displayed a notable reduction in the DNA fragmentation index to 6.94%, signifying a substantial 90% enhancement in DNA integrity. This remarkable advancement positions the TRMC device as highly suitable for applications in in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI), offering a promising solution to male infertility challenges.

Microfluidic sperm sorting selects a subpopulation of high-quality sperm with a higher potential for fertilization

STUDY QUESTION

Is a microfluidic sperm sorter (MSS) able to select higher quality sperm compared to conventional methods?

SUMMARY ANSWER

The MSS selects sperm with improved parameters, lower DNA fragmentation, and higher fertilizing potential.

WHAT IS KNOWN ALREADY

To date, the few studies that have compared microfluidics sperm selection with conventional methods have used heterogeneous study population and have lacked molecular investigations.

STUDY DESIGN, SIZE, DURATION

The efficiency of a newly designed MSS in isolating high-quality sperm was compared to the density-gradient centrifugation (DGC) and swim-up (SU) methods, using 100 semen samples in two groups, during 2023-2024.

PARTICIPANTS/MATERIALS, SETTING, METHODS

Semen specimens from 50 normozoospermic and 50 non-normozoospermic men were sorted using MSS, DGC, and SU methods to compare parameters related to the quality and fertilizing potential of sperm. The fertilizing potential of sperm was determined by measurement of phospholipase C zeta (PLCζ) and post-acrosomal sheath WW domain-binding protein (PAWP) expression using flow cytometry, and the chromatin dispersion test was used to assess sperm DNA damage.

MAIN RESULTS AND THE ROLE OF CHANCE

In both normozoospermic and non-normozoospermic groups, the MSS-selected sperm with the highest progressive motility, PLCζ positive expression and PLCζ and PAWP fluorescence intensity the lowest non-progressive motility, and minimal DNA fragmentation, compared to sperm selected by DGC and SU methods (P < 0.05).

LIMITATION, REASONS FOR CAUTION

The major limitations of our study were the low yield of sperm in the MSS chips and intentional exclusion of severe male factor infertility to yield a sufficient sperm count for molecular experiments; thus testing with severe oligozoospermic semen and samples with low count and motility is still required. In addition, due to ethical considerations, at present, it was impossible to use the sperm achieved from MSS in the clinic to assess the fertilization rate and further outcomes.

WIDER IMPLICATIONS OF THE FINDINGS

Our research presents new evidence that microfluidic sperm sorting may result in the selection of high-quality sperm from raw semen. This novel technology might be a key to improving clinical outcomes of assisted reproduction in infertile patients.

STUDY FUNDING/COMPETING INTEREST(S)

The study is funded by the Iran University of Medical Sciences and no competing interest exists.

TRIAL REGISTRATION NUMBER

N/A.

Only the Best of the Bunch-Sperm Preparation Is Not Just about Numbers

In this Seminar, we present an overview of the current and emerging methods and technologies for optimizing the man and the sperm sample for fertility treatment. We argue that sperms are the secret to success, and that there are many avenues for improving both treatment and basic understanding of their role in outcomes. These outcomes encompass not just whether treatment is successful or not, but the wider intergenerational health of the offspring. We discuss outstanding challenges and opportunities of new technologies such as microfluidics and artificial intelligence, including potential pitfalls and advantages. This article aims to provide a comprehensive overview of the importance of sperm in fertility treatment and suggests future directions for research and innovation.

Sperm quality metrics were improved by a biomimetic microfluidic selection platform compared to swim-up methods

Sperm selection is an essential component of all assisted reproductive treatments (ARTs) and is by far the most neglected step in the ART workflow in regard to technological innovation. Conventional sperm selection methodologies typically produce a higher total number of sperm with variable motilities, morphologies, and levels of DNA integrity. Gold-standard techniques, including density gradient centrifugation (DGC) and swim-up (SU), have been shown to induce DNA fragmentation through introducing reactive oxygen species (ROS) during centrifugation. Here, we demonstrate a 3D printed, biologically inspired microfluidic sperm selection device (MSSP) that utilizes multiple methods to simulate a sperms journey toward selection. Sperm are first selected based on their motility and boundary-following behavior and then on their expression of apoptotic markers, yielding over 68% more motile sperm than that of previously reported methods with a lower incidence of DNA fragmentation and apoptosis. Sperm from the MSSP also demonstrated higher motile sperm recovery after cryopreservation than that of SU or neat semen. Experiments were conducted side-by-side against conventional SU methods using human semen (n = 33) and showed over an 85% improvement in DNA integrity with an average 90% reduction in sperm apoptosis. These results that the platform is easy-to-use for sperm selection and mimics the biological function of the female reproductive tract during conception.

Translational Nanomedicines Across Human Reproductive Organs Modeling on Microfluidic Chips: State-of-the-Art and Future Prospects

Forecasting the consequence of nanoparticles (NPs) and therapeutically significant molecules before materializing for human clinical trials is a mainstay for drug delivery and screening processes. One of the noteworthy obstacles that has prevented the clinical translation of NP-based drug delivery systems and novel drugs is the lack of effective preclinical platforms. As a revolutionary technology, the organ-on-a-chip (OOC), a coalition of microfluidics and tissue engineering, has surfaced as an alternative to orthodox screening platforms. OOC technology recapitulates the structural and physiological features of human organs along with intercommunications between tissues on a chip. The current review discusses the concept of microfluidics and confers cutting-edge fabrication processes for chip designing. We also outlined the advantages of microfluidics in analyzing NPs in terms of characterization, transport, and degradation in biological systems. The review further elaborates the scope and research on translational nanomedicines in human reproductive organs (testis, placenta, uterus, and menstrual cycle) by taking the advantages offered by microfluidics and shedding light on their potential future implications. Finally, we accentuate the existing challenges for clinical translation and scale-up dynamics for microfluidics chips and emphasize its future perspectives.

Disposable Paper-Based Microfluidics for Fertility Testing

Fifteen percent of couples of reproductive age suffer from infertility globally and the burden of infertility disproportionately impacts residents of developing countries. Assisted reproductive technologies (ARTs), including in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI), have been successful in overcoming various reasons for infertility including borderline and severe male factor infertility which consists of 20%–30% of all infertile cases. Approximately half of male infertility cases stem from suboptimal sperm parameters. Therefore, healthy/normal sperm enrichment and sorting remains crucial in advancing reproductive medicine. Microfluidic technologies have emerged as promising tools to develop in-home rapid fertility tests and point-of-care (POC) diagnostic tools. Here, we review advancements in fabrication methods for paper-based microfluidic devices and their emerging fertility testing applications assessing sperm concentration, sperm motility, sperm DNA analysis, and other sperm functionalities, and provide a glimpse into future directions for paper-based fertility microfluidic systems.

•

Paper-based technologies are emerging to develop in-home rapid fertility tests

•

Fabrication methods for paper-based microfluidic devices are presented

•

Emerging disposable paper-based fertility testing applications are reviewed

Electrically-driven handling of gametes and embryos: taking a step towards the future of ARTs

Electrical stimulation of gametes and embryos and on-chip manipulation of microdroplets of culture medium serve as promising tools for assisted reproductive technologies (ARTs). Thus far, dielectrophoresis (DEP), electrorotation (ER) and electrowetting on dielectric (EWOD) proved compatible with most laboratory procedures offered by ARTs. Positioning, entrapment and selection of reproductive cells can be achieved with DEP and ER, while EWOD provides the dynamic microenvironment of a developing embryo to better mimic the functions of the oviduct. Furthermore, these techniques are applicable for the assessment of the developmental competence of a mammalian embryo in vitro. Such research paves the way towards the amelioration and full automation of the assisted reproduction methods. This article aims to provide a summary on the recent developments regarding electrically stimulated lab-on-chip devices and their application for the manipulation of gametes and embryos in vitro.

The influence of the female reproductive tract and sperm features on the design of microfluidic sperm-sorting devices

Although medical advancements have successfully helped a lot of couples with their infertility by assisted reproductive technologies (ART), sperm selection, a crucial stage in ART, has remained challenging. Therefore, we aimed to investigate novel sperm separation methods, specifically microfluidic systems, as they do sperm selection based on sperm and/or the female reproductive tract (FRT) features without inflicting any damage to the selected sperm during the process. In this review, after an exhaustive studying of FRT features, which can implement by microfluidics devices, the focus was centered on sperm selection and investigation devices. During this study, we tried not to only point to the deficiencies of these systems, but to put forth suggestions for their improvement as well.

CRISPR-Powered Microfluidics in Diagnostics: A Review of Main Applications

In the past few years, the CRISPR (clustered regularly interspaced short palindromic repeats) applications in medicine and molecular biology have broadened. CRISPR has also been integrated with microfluidic-based biosensors to enhance the sensitivity and selectivity of medical diagnosis due to its great potentials. The CRISPR-powered microfluidics can help quantify DNAs and RNAs for different diseases such as cancer, and viral or bacterial diseases among others. Here in this review, we discussed the main applications of such tools along with their advantages and limitations.

A Review on Microfluidics: An Aid to Assisted Reproductive Technology

Infertility is a state of the male or female reproductive system that is defined as the failure to achieve pregnancy even after 12 or more months of regular unprotected sexual intercourse. Assisted reproductive technology (ART) plays a crucial role in addressing infertility. Various ART are now available for infertile couples. Fertilization in vitro (IVF), intracytoplasmic sperm injection (ICSI) and intrauterine insemination (IUI) are the most common techniques in this regard. Various microfluidic technologies can incorporate various ART procedures such as embryo and gamete (sperm and oocyte) analysis, sorting, manipulation, culture and monitoring. Hence, this review intends to summarize the current knowledge about the application of this approach towards cell biology to enhance ART.