Beer Safety: New Challenges and Future Trends within Craft and Large-Scale Production

Development and validation of a liquid chromatography tandem mass spectrometry method for the determination of 10 mycotoxins in beer of the Chinese market and exposure estimate

Mycotoxins are important risk factors in beer. In this study, a liquid chromatography tandem mass spectrometry (LC-MS/MS) method was developed to determine 10 mycotoxins in beer within 6 min. The method is fast, efficient, and has a simple and quick sample preparation. Validation was conducted based on the performance standards specified in Commission Decision 657/2002/EC, and the results demonstrated excellent linearity (R2 > 0.99), repeatability (RSD < 5 %), quantification limits (0.005-20.246 µg/L), and recovery rates (77 %-118 %). The prevalence of the 10 mycotoxins in 96 beers purchased from the Chinese market was analyzed, and the exposure of the Chinese population to mycotoxins through beer consumption was assessed. Deoxynivalenol (DON) was detected in 93.75 % of the beers, and the incidence of fumonisins (FBs) and zearalenone (ZEN) exceeded 50 %. Beer intake contributed significantly to the exposure of aflatoxins (AFs) and DON, especially in males. Correlation analysis between mycotoxin content in beer, raw materials, and the brewing process revealed that the brewing process significantly affected the content of DON (P < 0.001), while auxiliary materials also had a significant impact on the content of FBs and DON (P < 0.001). This study holds great significance in producing higher quality and safer beer.

Drinking patterns, alcoholic beverage types, and esophageal cancer risk in Africa: a comprehensive systematic review and meta-analysis

Africa is the continent most affected by esophageal cancer in the world. Alcoholic beverages are controversially blamed, as esophageal cancer is a rare disease in several other countries ranked in the top 10 for consumption of alcoholic beverages. This study aims to conduct a comprehensive systematic review of published literature, statistically summarizing the strength of the association between drinking patterns and types, and the risk of esophageal cancer in Africa. A computerized search of reputable databases such as Medline/PubMed, EMBASE, Web of Science, and African Journals Online was performed to identify relevant studies published up to September 2023. The quality of the studies was evaluated using the Newcastle-Ottawa scale for case-control studies and the Agency for Healthcare Research and Quality tool for cross-sectional studies. A funnel plot and Egger test were utilized to assess potential publication bias. Meta-analyses were conducted using random-effects models with RevMan 5.3 and Stata software to estimate summary effects. The systematic review identified a total of 758,203 studies, primarily from Eastern and Southern Africa. The pooled samples across all studies comprised 29,026 individuals, including 11,237 individuals with cancer and 17,789 individuals without cancer. Meta-analysis revealed a significant association between alcohol consumption and the risk of esophageal cancer (odds ratio [OR] = 1.81; 95% confidence interval [CI], 1.50-2.19). Further analysis based on the frequency of alcoholic beverage consumption indicated a stronger association with daily (OR = 2.38; 95% CI, 1.81-3.13) and weekly (OR = 1.94; 95% CI, 1.32-2.84) drinkers in contrast to occasional drinkers (OR = 1.02; 95% CI, 0.81-1.29). Additionally, consumption of traditional alcoholic beverages was significantly associated with the risk of esophageal cancer in African populations (OR = 2.00; 95% CI, 1.42-2.82). However, no relationship has been established between the exclusive consumption of non-traditional drinks and the risk of esophageal cancer. In conclusion, the results of this study confirm the hypothesis that daily and weekly drinking patterns, significantly increase the risk of esophageal cancer in Africa, while occasional consumption does not show a significant association. Additionally, the consumption of traditional alcoholic beverages is notably linked to the risk of esophageal cancer in African populations.

Heavy Metals in Foods and Beverages: Global Situation, Health Risks and Reduction Methods

Heavy metals are chemical elements with a toxic effect on the human body. The expansion of industries has led to significant increasing levels of these constituents in the environment. Intensive agriculture can also lead to an increased concentration of heavy metals as a result of using different fertilizers and pesticides. Heavy metal accumulation in soil and plants represents a serious issue because of the potential risks to consumers. There are several methods available for the removal of these toxic components from different substrates (chemical precipitation, electrodialysis, coagulation and flocculation, photocatalytic removal, and adsorption-based processes), but most procedures are expensive and difficult to perform. Thus, more research is needed on the development of low-cost methods in foods. This work represents a review on the heavy metal presence in different food substrates (such as fruits and vegetables, milk and dairy products, meat and meat derivatives, oils, and alcoholic beverages) and provides an overview of the current situation worldwide, taking into account the fact that risks for human health are induced by the intensification of industry and the high degree of pollution. Considering that the toxicological quality of food affects its acceptability, this work provides valuable data regarding the actual situation on the proposed topic.

Activated natural zeolites for beer filtration: A pilot scale approach

A clinoptilolite-rich natural zeolite was tested as a substitute for kieselguhr as a filtering material to eliminate ingredients that cause beer haze formation. Two-grain sizes of micronized natural zeolite were thermally activated to 400 °C, to enhance its adsorption performance and remove the impurities adsorbed in the microporous system of zeolites, followed by their physicochemical characterization. The activated zeolites mixed with four commercial filter aids in different ratios were used for beer filtration at the pilot scale. Most of the physicochemical and sensory characteristics of beers filtered with commercial filter aids and with zeolites were similar. Using zeolite in filtering mixtures significantly reduces the number of microorganisms present in the filtered beer, which can eliminate the necessity of beer sterilization after filtration. The results evidenced that activated natural zeolites, which are cheap materials, are promising candidates as filter aids and can replace kieselguhr without producing any degradation of the beer filtration process.

Electrochemical Evaluation of Cd, Cu, and Fe in Different Brands of Craft Beers from Quito, Ecuador

The presence of heavy metals in craft beers can endanger human health if the total metal content exceeds the exposure limits recommended by sanitary standards; in addition, they can cause damage to the quality of the beer. In this work, the concentration of Cd(II), Cu(II), and Fe(III) was determined in 13 brands of craft beer with the highest consumption in Quito, Ecuador, by differential pulse anodic stripping voltammetry (DPASV), using as boron-doped diamond (BDD) working electrode. The BDD electrode used has favorable morphological and electrochemical properties for the detection of metals such as Cd(II), Cu(II), and Fe(III). A granular morphology with microcrystals with an average size between 300 and 2000 nm could be verified for the BDD electrode using a scanning electron microscope. Double layer capacitance of the BDD electrode was 0.01412 μF cm^-2, a relatively low value; Ip_ox/Ip_red ratios were 0.99 for the potassium ferro-ferricyanide system in BDD, demonstrating that the redox process is quasi-reversible. The figures of merit for Cd(II), Cu(II), and Fe(III) were; DL of 6.31, 1.76, and 1.72 μg L^-1; QL of 21.04, 5.87, and 5.72 μg L^-1, repeatability of 1.06, 2.43, and 1.34%, reproducibility of 1.61, 2.94, and 1.83% and percentage of recovery of 98.18, 91.68, and 91.68%, respectively. It is concluded that the DPASV method on BDD has acceptable precision and accuracy for the quantification of Cd(II), Cu(II), and Fe(III), and it was verified that some beers did not comply with the permissible limits of food standards.

Preparation, Characterization, and Performance of Natural Zeolites as Alternative Materials for Beer Filtration

The clarity of the beer is essential to its marketability and good consumer approval. Moreover, the beer filtration aims to remove the unwanted constituents that cause beer haze formation. Natural zeolite, an inexpensive and widespread material, was tested as a substitute filter media for diatomaceous earth in removing the haze constituents in beer. The zeolitic tuff samples were collected from two quarries in Northern Romania: Chilioara, in which the zeolitic tuff has a clinoptilolite content of about 65%, and the Valea Pomilor quarry, containing zeolitic tuff with a clinoptilolite content of about 40%. Two-grain sizes, <40 and <100 µm, from each quarry were prepared and thermally treated at 450 °C in order to improve their adsorption properties and remove organic compounds and for physico-chemical characterization. The prepared zeolites were used for beer filtration in different mixtures with commercial filter aids (DIF BO and CBL3) in laboratory-scale experiments, and the filtered beer was characterized in terms of pH, turbidity, color, taste, flavor, and concentrations of the major and trace elements. The results showed that the taste, flavor, and pH of the filtered beer were generally not affected by filtration, while turbidity and color decreased with an increase in the zeolite content used in the filtration. The concentrations of Na and Mg in the beer were not significantly altered by filtration; Ca and K slowly increased, while Cd and Co were below the limits of quantification. Our results show that natural zeolites are promising aids for beer filtration and can be readily substituted for diatomaceous earth without significant changes in brewery industry process equipment and protocols for preparation.

Fruit-Based Fermented Beverages: Contamination Sources and Emerging Technologies Applied to Assure Their Safety

The food and beverage market has become broader due to globalization and consumer claims. Under the umbrella of consumer demands, legislation, nutritional status, and sustainability, the importance of food and beverage safety must be decisive. A significant sector of food production is related to ensuring fruit and vegetable conservation and utilization through fermentation. In this respect, in this review, we critically analyzed the scientific literature regarding the presence of chemical, microbiological and physical hazards in fruit-based fermented beverages. Furthermore, the potential formation of toxic compounds during processing is also discussed. In managing the risks, biological, physical, and chemical techniques can reduce or eliminate any contaminant from fruit-based fermented beverages. Some of these techniques belong to the technological flow of obtaining the beverages (i.e., mycotoxins bound by microorganisms used in fermentation) or are explicitly applied for a specific risk reduction (i.e., mycotoxin oxidation by ozone). Providing manufacturers with information on potential hazards that could jeopardize the safety of fermented fruit-based drinks and strategies to lower or eliminate these hazards is of paramount importance.

The Role of Emergent Processing Technologies in Beer Production

The brewing industry is regarded as a fiercely competitive and insatiable sector of activity, driven by the significant technological improvements observed in recent years and the most recent consumer trends pointing to a sharp demand for sensory enhanced beers. Some emergent and sustainable technologies regarding food processing such as pulsed electric fields (PEF), ultrasound (US), thermosonication (TS), high-pressure processing (HPP), and ohmic heating (OH) have shown the potential to contribute to the development of currently employed brewing methodologies by both enhancing the quality of beer and contributing to processing efficiency with a promise of being more environmentally friendly. Some of these technologies have not yet found their way into the industrial brewing process but already show potential to be embedded in continuous thermal and non-thermal unit operations such as pasteurization, boiling and sterilization, resulting in beer with improved organoleptic properties. This review article aims to explore the potential of different advanced processing technologies for industrial application in several key stages of brewing, with particular emphasis on continuous beer production.

Influence of Brewing Process on the Profile of Biogenic Amines in Craft Beers

The evaluation of the biogenic amines (BAs) profile of different types of craft beers is herein presented. A previously developed and validated analytical method based on ion-pair chromatography coupled with potentiometric detection was used to determine the presence of 10 BAs. Good analytical features were obtained for all amines regarding linearity (R² values from 0.9873 ± 0.0015 to 0.9973 ± 0.0015), intra- and inter-day precision (RSD lower than 6.9% and 9.7% for beer samples, respectively), and accuracy (recovery between 83.2-108.9%). Detection and quantification limits range from 9.3 to 60.5 and from 31.1 to 202.3 µg L^-1, respectively. The validated method was applied to the analysis of four ale beers and one lager craft beer. Ethylamine, spermidine, spermine, and tyramine were detected in all analyzed samples while methylamine and phenylethylamine were not detected. Overall, pale ale beers had a significantly higher total content of BAs than those found in wheat pale and dark samples. A general least square regression model showed a good correlation between the total content of BAs and the brewing process, especially for Plato degree, mashing, and fermentation temperatures. Knowledge about the type of ingredients and manufacturing processes that contribute to higher concentrations of these compounds is crucial to ensuring consumer safety.

Phenolic-Degrading Enzymes: Effect on Haze Active Phenols and Chill Haze in India Pale Ale Beer

The development of green and sustainable biotechnological approaches for preventing chill haze formation is currently under investigation. In this preliminary study, laccase and tannase (pure or combined) were applied as phenolic-degrading enzymes during two crucial brewing steps (i. post-mashing and ii. before the yeast inoculum). In post-mashing and irrespective of the dosage applied (100 μL/L or 1 mL/L), tannase-based treatment ensured the complete removal of haze active (HA) phenols, which was proved by the full prevention of chill haze (about 1 EBC vs. 22 EBC in the control sample). Before yeast inoculum for the alcoholic fermentation, the removal of haze active phenols and the prevention of chill haze were both tannase-dosage-dependent (15 and 2 EBC for the lowest and the highest dosages, respectively) although they failed to completely break down the HA phenols. This biotechnological approach did not significantly affect the chromatic properties of treated beer.