Construction of a Molecularly Imprinted Sensor Modified with Tea Branch Biochar and Its Rapid Detection of Norfloxacin Residues in Animal-Derived Foods

Determination of indole-3-acetic acid using disposable molecularly imprinted electrochemical sensors based on bifunctional monomers

Stainless steel sheets were coated with carbon ink to obtain disposable carbon electrodes, which were used as supports for moleculary imprinted polymer (MIP) electrochemical sensors by electropolymerizing o-phenylenediamine and o-aminophenol along with indole-3-acetic acid (IAA) as the template. After optimization, the MIP biosensors could be used for sensitive and selective detection of IAA with the limit of quantification of 0.1 µM. Our experimental results showed that stable and reproducible electrochemical responses could be achieved for the disposable MIP biosensors. This approach was successfully used for detection of IAA in different tissues of pea sprouts. This study reveals the potential of MIP electrochemical sensors in practical applications and shrinks the trench between the research and the real world.

Bimetallic iron-copper nanozyme for determination and degradation of norfloxacin in foods

Iron-copper nanozymes (Fe-Cu NZs) with good peroxidase activity were prepared through hydrothermal method by using copper nitrate as copper source, iron acetate as iron source and 2, 5-dihydroxyterephthalic acid as organic ligand. Upon oxidation of the colourless TMB to light blue products by Fe-Cu NZs, the addition of Norfloxacin (NOR) resulted in a colour change to dark blue. The absorbance of the system correlated linearly with NOR concentration in the range of 3.3 μM to 66 μM, and the detection limit (LOD) was 0.386 μM. A rapid colourimetric assay for the determination of NOR in food matrices was developed, with a detection time of only one minute. Additionally, the assay facilitated the simultaneous catalytic degradation of NOR via Fe-Cu NZs. The primary degradation mechanism of NOR was identified as the transformation of the quinolone ring and the cleavage of the C9 = C10 double bond, which was substantiated by high-performance liquid chromatography (HPLC).

Study of dual binding specificity of aptamer to ochratoxin A and norfloxacin and the development of fluorescent aptasensor in milk detection

Target specificity, one of aptamer characteristics that determine recognition efficiency of biosensors, is generally considered to be an intrinsic property of aptamer. However, a high-affinity aptamer may have additional target binding specificity, little is known about the specificity of aptamer binding to multiple targets, which may result in false-positive results that hinder the accuracy of detection. Herein, an aptamer OBA3 with dual target ochratoxin A (OTA) and norfloxacin (NOR) was used as an example to explore the binding specificity mechanism and developed rapid fluorescent aptasensing methods. The nucleotide 15th T of aptamer OBA3 was demonstrated to be critical for specificity and affinity binding of target OTA via site-saturation mutagenesis. Substituting the 15th T base for C base could directly improve recognition specificity of aptamer for NOR and remove the binding affinity for OTA. The combination of π-π stacking interactions, salt bridges and hydrogen bonds between loop pocket of aptamer and quinolone skeleton, piperazinyl group may contributes to the fluoroquinolone antibiotics (NOR and difloxacin)-aptamer recognition interaction. Based on this understanding, a dual-aptamer fluorescent biosensor was fabricated for simultaneous detection of OTA and NOR, which has a linear detection range of 50-6000 nM with a detection limit of 31 nM for OTA and NOR. Combined with T15C biosensor for eliminating interference of OTA, the assay was applied to milk samples with satisfactory recovery (94.06-100.93%), which can achieve detection of OTA and NOR individually within 40 min.

Y3+@CdTe quantum dot nanoprobe as a fluorescence signal enhancement sensing platform for the visualization of norfloxacin

Quinolone antibiotics (norfloxacin) pose a serious threat to animal and human health due to their misuse and difficulty in being broken down in surface water and food. Rapid and effective detection of norfloxacin (NOR) is essential for environmental testing and ecosystems. In this study, yttrium was coordinated with mercaptopropionic acid (MPA)-modified CdTe quantum dots (QDs) to obtain a novel fluorescence sensor Y³⁺@CdTe QDs for the sensitive detection of NOR. NOR can bind to Y³⁺ to form a complex (NOR-Y³⁺). This complex enhances the luminescence of NOR and blue-shifts to 423 nm. The fluorescence intensity of NOR-Y³⁺ at 423 nm (I₄₂₃) gradually increased with increasing NOR concentration; meanwhile, the fluorescence intensity of CdTe QDs at 634 nm (I₆₃₄) gradually decreased due to aggregation induction. The ratio of I₄₂₃ to I₆₃₄ was used for the quantitative determination of NOR. The linear range of the constructed fluorescent probes was from 1.0 to 150.0 μM, with a detection limit of 31.8 nM. CdTe QDs act as a red fluorescent background, and with the addition of NOR, the color of the system transitions from red to purple and finally blue. This method was rapid (immediate) and visual, providing a simple analysis of various actual samples (tap water, lake water, honey, milk and human serum) for NOR.

Efficacious Sorption Capacities for Pb(II) from Contaminated Water: A Comparative Study Using Biowaste and Its Activated Carbon as Potential Adsorbents

Heavy-metal pollution is a persevering environmental menace, which demands the necessity of its removal by green and ecofriendly adsorbents. To combat this problem, discarded plant biomass can be used as an efficient substitute. Herein, a comparative study has been highlighted for the removal of Pb²⁺ ions using Euryale ferox Salisbury seed coat and its activated carbon, which is prepared by a first-time-reported activating agent that is a novel and non-hazardous bioresource. The batch investigation revealed a 99.9% removal efficiency of Pb(II) by the activated carbon compared to Euryale ferox Salisbury seed coat, which shows only an 89.5% removal efficiency at neutral pH. The adsorption mechanism is mainly a multilayered process, which involves electrostatic, van der Waals, and hydrogen bonding interactions. The adsorption equilibrium, kinetic, and thermodynamic studies were examined for the biosorbents, which revealed the adsorption process to be feasible, spontaneous, and exothermic with both physisorption and chemisorption adsorption mechanisms. The desorption study asserted the reusability of both the biosorbents to a maximum of three cycles.