Polymeric Sorbent Sheets Coupled to Direct Analysis in Real Time Mass Spectrometry for Trace-Level Volatile Analysis-A Multi-Vineyard Evaluation Study

Selective Sampling to and Desorption from Single Solid-Phase Microextraction Arrow Fiber for Replicative and Quantitative Analysis

New analytical functionality is demonstrated with an enclosed interface that joins a solid phase microextraction (SPME) device, a direct analysis in real time (DART) probe, and a high-resolution mass spectrometer. With a single 20 mm long SPME Arrow, the interface is able to perform five discrete DART analyses on different areas of the same fiber in 1 min of practical operation time. Three-fiber replicates for 15 runs total produce 15% or better center of variance (CV) values for both volatile headspace sampling and direct immersion sampling of a solvated analyte. Chemometric analysis of rapidly acquired headspace data is able to distinguish volatile profiles. Selective desorption within the interface also confers the ability to selectively sample to discrete areas of a fiber, and three different headspace samples or five different liquid samples can be acquired and differentiated with one Arrow. A five-point standard addition curve is constructed to measure the concentration of the solvated analyte. Unmodified commercial components of the analysis system include the fiber itself, the Orbitrap and AccuTOF mass spectrometer platforms, and the conditioning gas chromatograph inlet. Machine diagrams for the SPME-DART interface and Arrow fiber holder are included.

Rapid Detection of Potential Natural Food Preservatives and Identification of Artemisia Species via High-Sensitivity Photoionization Mass Spectrometry

Natural food preservatives are being sought extensively as a safe alternative to chemical food preservatives. This study aimed to identify potential natural preservatives from herbs using single-photon ionization time-of-flight mass spectrometry (SPI-TOF-MS). Five Artemisia species and four other herbs were analyzed, and the random forest (RF) algorithm was used to simulate olfaction and distinguish the Artemisia species by identifying the characteristic peaks of volatile terpenoids (VTPs). Results showed that the terpenoid synthase (TPS) gene family was expanded in Artemisia species, potentially contributing to the increased production of VTPs, which have potential as natural preservatives and specifically identify these species. The limits of detections (LODs) for principle VTPs in Artemisia species were as low as 22-39 parts-per-trillion-by-volume (pptv) using SPI-TOF-MS. This study highlights the potential for headspace mass spectrometry to be used in the development of natural preservatives and the identification of plant species.

Plasma-based ambient mass spectrometry: Recent progress and applications

Ambient mass spectrometry (AMS) has grown as a group of advanced analytical techniques that allow for the direct sampling and ionization of the analytes in different statuses from their native environment without or with minimum sample pretreatments. As a significant category of AMS, plasma-based AMS has gained a lot of attention due to its features that allow rapid, real-time, high-throughput, in vivo, and in situ analysis in various fields, including bioanalysis, pharmaceuticals, forensics, food safety, and mass spectrometry imaging. Tens of new methods have been developed since the introduction of the first plasma-based AMS technique direct analysis in real-time. This review first provides a comprehensive overview of the established plasma-based AMS techniques from their ion source configurations, mechanisms, and developments. Then, the progress of the representative applications in various scientific fields in the past 4 years (January 2017 to January 2021) has been summarized. Finally, we discuss the current challenges and propose the future directions of plasma-based AMS from our perspective.

Optimized Solid-Phase Mesh-Enhanced Sorption from Headspace (SPMESH) for Rapid Sub-ng/kg Measurements of 3-Isobutyl-2-methoxypyrazine (IBMP) in Grapes

Parallel extraction of headspace volatiles from multiwell plates using sorbent sheets (HS-SPMESH) followed by direct analysis in real-time high-resolution mass spectrometry (DART-HRMS) can be used as a rapid alternative to solid-phase micro-extraction (SPME) gas-chromatography mass-spectrometry (GC-MS) for trace level volatile analyses. However, an earlier validation study of SPMESH-DART-MS using 3-isobutyl-2-methoxypyrazine (IBMP) in grape juice showed poor correlation between SPMESH-DART-MS and a gold standard SPME-GC-MS around the compound’s odor detection threshold (<10 ng/kg) in grape juice, and lacked sufficient sensitivity to detect IBMP at this concentration in grape homogenate. In this work, we report on the development and validation of an improved SPMESH extraction approach that lowers the limit of detection (LOD < 0.5 ng/kg), and regulates crosstalk between wells (<0.5%) over a calibration range of 0.5−100 ng/kg. The optimized SPMESH-DART-MS method was validated using Cabernet Sauvignon and Merlot grape samples harvested from commercial vineyards in the central valley of California (n = 302) and achieved good correlation and agreement with SPME-GC-MS (R2 = 0.84) over the native range of IBMP (<0.5−20 ng/kg). Coupling of SPMESH to a lower resolution triple quadrupole (QqQ)-MS via a new JumpShot-HTS DART source also achieved low ng/kg detection limits, and throughput was improved through positioning stage optimizations which reduced time spent on intra-well SPMESH areas.

Swellable Sorbent Coatings for Parallel Extraction, Storage, and Analysis of Plant Metabolites

Quantitative and qualitative measurements of trace-level analytes in plants or foodstuffs, e.g., secondary metabolites like carotenoids, are often performed at centralized core facilities or off-site laboratories. However, preparation, storage, and/or transport of both intact samples and sample extracts may be cumbersome and complicated, especially for air-sensitive analytes. We describe the development of inexpensive swellable microextraction (SweME) devices for extraction and storage of nonpolar analytes. SweME devices consist of a thin layer of poly(dimethylsiloxane) (PDMS) grafted onto a stainless steel support. Pretreating the SweME device with small volumes of the organic solvent causes the PDMS to swell. The swollen SweME device can then be immersed directly into complex matrices for absorptive extraction of low-molecular-weight, nonpolar analytes. Following storage, analytes can be solvent-desorbed prior to characterization. Proof-of-principle work with carotenoids from tomatoes and carrots demonstrates that SweME is appropriate for semiquantitative analyses and increases the stability of air-sensitive analytes during storage at ambient temperatures as compared to the solvent extracts. Carotenoid profiles (fractional carotenoid contributions) from tomato and carrot samples were well correlated between SweME and liquid-liquid extraction (R² = 0.97 and 0.94). Lycopene, the most abundant carotenoid in tomatoes, saw a less than 20% decrease in extracted mass during 1 month of ambient SweME storage. Extractions and desorptions can be run in parallel using multiwell plates. In summary, swelled sorbent extraction with SweME devices is a convenient and inexpensive approach for isolation and storage of analytes in complex matrices and may be particularly well suited for evaluating large numbers of plant samples through external laboratories.

Rapid Analysis of Volatile Phenols from Grape Juice by Immersive Sorbent Sheet Extraction Prior to Direct Analysis in Real-Time Mass Spectrometry (DART-MS)

Poly(dimethylsiloxane)-based thin-film sorbent sheets (SPMESH) have previously been used for parallel headspace (HS) extraction prior to direct analysis in real-time mass spectrometry (DART-MS) for rapid quantitation of odorants in complex matrices. However, HS-SPMESH extraction is poorly suited for less volatile odorants, e.g., volatile phenols. This report describes modifications to the previous SPMESH extraction device, which make it amenable to parallel extraction of low-volatility analytes from multiwell plates under direct immersion (DI) conditions. Optimization and validation of the DI-SPMESH-DART-MS approach were performed on four volatile phenols (4-ethylphenol, 4-ethylguaiacol, 4-methylguaiacol, and guaiacol) of relevance to the quality of grape juices. Negative-ion mode DART-MS spectra showed a series of oxygenated adducts [M + nO - H]^- for all analytes, but isobaric interferences could be limited for three of the four analytes by selecting an appropriate MS/MS transition. Signal suppression from nonvolatiles (sugars, acids) could be overcome by a rinse step. DI-SPMESH-DART-MS analysis of 24 samples could be performed in ∼45 min (30 min extraction, 16 min DART analysis) with 0.5-3 μg/L detection limits in aqueous and model juice solutions. In real grape juices (n = 5 cultivars), good accuracy (72-137%) could be achieved for two of the four volatile phenols initially investigated, 4-ethylphenol and 4-ethylguaiacol. However, poor accuracy was observed for guaiacol in some cultivars, and 4-methylguaiacol could not be quantitated due to interferences with other volatile phenols. Despite these limitations, DI-SPMESH-DART-MS/MS may be useful for prescreening a large number of samples prior to more selective conventional analyses.

Quantification of Volatile Compounds in Wines by HS-SPME-GC/MS: Critical Issues and Use of Multivariate Statistics in Method Optimization

The aim of this review is to explore and discuss the two main aspects related to a HeadSpace Solid Phase Micro-Extraction Gas-Chromatography/Mass-Spectrometry (HS-SPME-GC/MS) quantitative analysis of volatile compounds in wines, both being fundamental to obtain reliable data. In the first section, recent advances in the use of multivariate optimization approaches during the method development step are described with a special focus on factorial designs and response surface methodologies. In the second section, critical aspects related to quantification methods are discussed. Indeed, matrix effects induced by the complexity of the volatile profile and of the non-volatile matrix of wines, potentially differing between diverse wines in a remarkable extent, often require severe assumptions if a reliable quantification is desired. Several approaches offering different levels of data reliability including internal standards, model wine calibration, a stable isotope dilution analysis, matrix-matched calibration and standard addition methods are reported in the literature and are discussed in depth here.

Analysis of food samples made easy by microextraction technologies directly coupled to mass spectrometry

Because of the complexity and diversity of food matrices, their chemical analysis often entails several analytical challenges to attain accurate and reliable results, especially for multiresidue analysis and ultratrace quantification. Nonetheless, microextraction technology, such as solid-phase microextraction (SPME), has revolutionized the concept of sample preparation for complex matrices because of its nonexhaustive, yet quantitative extraction approach and its amenability to coupling to multiple analytical platforms. In recent years, microextraction devices directly interfaced with mass spectrometry (MS) have redefined the analytical workflow by providing faster screening and quantitative methods for complex matrices. This review will discuss the latest developments in the field of food analysis by means of microextraction approaches directly coupled to MS. One key feature that differentiates SPME-MS approaches from other ambient MS techniques is the use of matrix compatible extraction phases that prevent biofouling, which could drastically affect the ionization process and are still capable of selective extraction of the targeted analytes from the food matrix. Furthermore, the review examines the most significant applications of SPME-MS for various ionization techniques such as direct analysis in real time, dielectric barrier desorption ionization, and some unique SPME geometries, for example, transmission mode SPME and coated blade spray, that facilitate the interface to MS instrumentation.