Non-Thermal Ultrasonic Extraction of Polyphenolic Compounds from Red Wine Lees

Extraction of Bioactive Compounds from Wine Lees: A Systematic and Bibliometric Review

The extraction of bioactive compounds from wine lees involves a variety of methods, the selection of which is crucial to ensure optimal yields. This systematic review, following PRISMA guidelines and utilizing the Web of Science database, aimed to examine the current state of this field, providing insights for future investigations. The search employed strategies with truncation techniques and Boolean operators, followed by a three-step screening using well-defined eligibility criteria. A bibliometric analysis was conducted to identify authors, affiliations, countries/regions, and research trends. Thirty references were selected for analysis, with Spain standing out as the main source of research on the topic. The majority of studies (66%) focused on the extraction of bioactive compounds from alcoholic fermentation lees, while 33% were directed towards malolactic fermentation lees. Binary mixtures (ethanol-water) were the predominant solvents, with ultrasound being the most used extraction method (31.3%), providing the highest average yields (288.6%) for the various evaluated compounds, especially flavonoids. The potential of wine lees as a source of bioactive compounds is highlighted, along with the need for further research exploring alternative extraction technologies and the combination of methods. Additionally, the importance of "in vitro" and "in vivo" tests to assess the bioactive potential of lees, as well as the use of computational tools to optimize extraction and identify the molecules responsible for bioactive activity, is emphasized.

Effect of ultrasonic treatment during fermentation on the quality of fortified sweet wine

The present study aimed to investigate the potential of ultrasonic treatment during fermentation for enhancing the quality of fortified wines with varying time and power settings. Chemical analysis and sensory evaluation were conducted to assess the impact of ultrasonic treatment on wine quality. Results showed that ultrasonic treatment could increase total anthocyanin and total phenol content, reduce anthocyanin degradation rate, and improve color stability. Moreover, ethyl carbamate content was lower in the ultrasonic group after aging compared to non-ultrasonic group. A combination of 200 W for 20 min resulted in higher sensory scores and more coordinated taste, while a combination of 400 W for 40 min produced higher levels of volatile compounds (21860.12 μg/L) leading to a richer and more elegant aroma. Therefore, ultrasound can be used as a potential technology to improve the quality of wine.

Current analytical strategies for the determination of resveratrol in foods

Resveratrol, a non-flavonoid polyphenolic compound, possesses various beneficial properties such as anti-cancer, anti-aging, anti-bacterial, and antioxidant effects. It is naturally produced by many plants in response to stimulation. However, the content of resveratrol in natural plants can vary significantly, ranging from micrograms to milligrams per kilogram. As the demand for resveratrol increases, the development of methods for extracting and quantifying resveratrol in food has become a rapidly growing field in recent years. This review aims to comprehensively summarize the progress made in resveratrol analysis in food over the past decade (2012-2022), with a specific focus on the latest advancements in extraction and detection technologies. The objective is to offer a valuable reference for further research and utilization of resveratrol in various food applications.

Resveratrol-based biorefinery models for favoring its inclusion along the market value-added chains: A critical review

Resveratrol, a natural organic polyhydroxyphenolic compound, has gained significant attention in the last years given its potential health benefits, including antioxidant, anti-cancer, and anti-inflammatory properties. It can be directly extracted from plants, vegetables, and related products and waste resources, but also chemically/enzymatically/microbially synthesized. However, certain process strategies have some limitations, such as high costs, reduced yield or high energy demand, thus implying significant environmental loads. In this context, the search for more sustainable and circular process schemes is key to the integration of resveratrol into the market value chain of the food, cosmetic and pharmaceutical sectors. The extraction of resveratrol has traditionally been based on conventional methods such as solvent extraction, but advanced green extraction techniques offer more efficient and environmentally friendly alternatives. This review analyses both conventional and green alternative extraction technologies, as well as its bioproduction through microbial fermentation, in terms of production capacity, yield, purity and sustainability. It also presents alternative biorefinery models based on resveratrol bioproduction using by-products and waste streams as resources, specifically considering wine residues, peanut shells and wood bark as input resources, and also following a circular approach. This critical review provides some insight into the opportunities that resveratrol offers for promoting sustainable development and circularity in the related market value chains, and thus provides some criteria for decision making for biorefinery models in which resveratrol is one of the targeted high value-added products. It also identifies the future challenges to promote the inclusion of resveratrol in value chains, with the scale-up of green technologies and its demonstrated economic feasibility being the most prominent.

Enhancing Anthocyanin Extraction from Wine Lees: A Comprehensive Ultrasound-Assisted Optimization Study

Wine lees, an important by-product of the wine industry, pose a major environmental problem due to the enormous quantities of solid-liquid waste that are discarded annually without defined applications. In this study, the optimization of a method based on a Box-Behnken design with surface response has been carried out to obtain extracts with high anthocyanin content and potent antioxidant activity. Six variables have been considered: %EtOH, temperature, amplitude, cycle, pH, and ratio. The developed method exhibited important repeatability properties and intermediate precision, with less than 5% CV being achieved. Furthermore, these novel methods were successfully applied to diverse wine lees samples sourced from Cabernet Sauvignon and Syrah varieties (Vitis vinifera), resulting in extracts enriched with significant anthocyanin content and noteworthy antioxidant activity. Additionally, this study evaluated the influence of grape variety, fermentation type (alcoholic or malolactic), and sample treatment on anthocyanin content and antioxidant activity, providing valuable insights for further research and application in various sectors. The potential applications of these high-quality extracts extend beyond the winemaking industry, holding promise for fields like medicine, pharmaceuticals, and nutraceuticals, thus promoting a circular economy and mitigating environmental contamination.

The state-of-the-art research of the application of ultrasound to winemaking: A critical review

As a promising non-thermal physical technology, ultrasound has attracted extensive attention in recent years, and has been applied to many food processing operation units, such as involving filtration, freezing, thawing, sterilization, cutting, extraction, aging, etc. It is also widely used in the processing of meat products, fruits and vegetables, and dairy products. With regard to its application in winemaking, most of the studies available in the literature are focused on the impact of ultrasound on a certain characteristic of wine, lacking of systematic sorting of these literatures. This review systematically summarizes and explores the current achievements and problems of the application of ultrasound to the different stages of winemaking, including extraction, fermentation, aging and sterilization. Summarizing the advantages and disadvantages of ultrasound application in winemaking and its development in future development.

Chemical Characterization and Bioactive Properties of Wine Lees and Diatomaceous Earth towards the Valorization of Underexploited Residues as Potential Cosmeceuticals

Annually, wine production is responsible for generating large quantities of residues, which are frequently disposed of and not valorized. So far, different studies have been conducted on grape pomace, yet less attention has been paid to other residues, such as wine lees and diatomaceous earth used in wine filtration. In this context, this study aimed to evaluate and compare the phenolic profile of these underexploited winemaking residues and assess their biological potential based on their antioxidant, antimicrobial, cytotoxic, and anti-aging activities (inhibition of tyrosinase and collagenase). Twenty-nine phenolic compounds, including twelve anthocyanins, were tentatively identified in the residues, with red grape pomace showing the highest diversity of compounds. The diatomaceous earth presented the highest content of non-anthocyanin phenolic compounds, being particularly rich in flavan-3-ols and myricetin-O-hexoside, and also presenting two anthocyanins. This sample also showed a high antioxidant activity, evidencing the best result in the reducing power assay. The red wine lees extract, despite showing a low content of phenolic compounds and less antioxidant activity, presented the highest inhibition capacity of bacteria growth. The extracts did not exhibit cytotoxicity against keratinocyte (up to 400 μg/mL) and fibroblast (up to 100 μg/mL) skin cell lines. However, the capacity of inhibiting tyrosinase and collagenase was low for the lees and diatomaceous earth, contrary to the grape pomace, seeds, and skins extracts that showed promising results, evidencing its potential as a cosmeceutical. Overall, this study highlights for the first time the potential of diatomaceous earth, an underexploited winemaking waste, in the obtention of added-value extracts and/or ingredients for cosmetic industry.

The (Poly)phenolic Profile of Separate Winery By-Products Reveals Potential Antioxidant Synergies

The by-products of grapes (Vitis vinifera L.) in the winemaking process present a diverse phytochemical profile of (poly)phenols, essentially represented by phenolic acids, flavonoids, and stilbenes, which have health benefits. In winemaking, solid (grape stems and pomace) and semisolid (wine lees) by-products are generated, negatively impacting the sustainability of the agro-food activity and the local environment. Although information on the phytochemical profile of grape stems and pomace has been reported, especially information concerning (poly)phenols, research on wine lees is necessary to take advantage of the compositional traits of this residue. So, in the present work, an updated, in-depth comparison of the (poly)phenolic profiles of these three resulting matrices in the agro-food industry has been carried out to provide new knowledge and interesting data on the action of yeast and lactic acid bacteria (LAB) metabolism in the diversification of phenolic composition; additionally, we extract complementarities for the possible joint application of the three residues. The phytochemical analysis of the extracts was carried out using HPLC-PDA-ESI-MSn. The (poly)phenolic profiles of the residues showed significant discrepancies. The results obtained showed that the greatest diversity of (poly)phenols was found in the stems of the grapes, followed closely by the lees. Through technological insights, it has been suggested that yeasts and LAB, responsible for the fermentation of must, might play a key role in the transformation of phenolic compounds. This would provide new molecules with specific bioavailability and bioactivity features, which might interact with different molecular targets and, consequently, improve the biological potential of these underexploited residues.

Sequential Extraction of Hydroxytyrosol, Mannitol and Triterpenic Acids Using a Green Optimized Procedure Based on Ultrasound

Olive-derived biomasses contain bioactive compounds with health promoting effects as well as antioxidant and sweet-tasting properties. However, their sequential extraction has not been attained. In the present study, firstly antioxidants and mannitol were extracted from exhausted olive pomace (EOP) by an eco-friendly method, ultrasound-assisted water extraction (UAWE). The amplitude (20-80%), extraction time (2-18 min) and solid loading (2-15%, w/v) were evaluated according to a Box-Behnken experimental design. Using the response surface methodology, the optimal conditions for extraction were obtained: 80% amplitude, 11.5% solid loading and 16 min. It enabled the multi-response optimization of the total phenolic content (TPC) (40.04 mg/g EOP), hydroxytyrosol content (6.42 mg/g EOP), mannitol content (50.92 mg/g EOP) and antioxidant activity (ferric reducing power or FRAP, 50.95 mg/g EOP; ABTS, 100.64 mg/g EOP). Moreover, the phenolic profile of the extracts was determined by liquid chromatography-UV and mass spectrometry, identifying hydroxytyrosol as the main phenolic compound and other minor derivatives could be characterized. Scanning electron microscopy was used to analyze the morphological changes produced in the cellular structure of EOP after UAWE. In addition, the chemical composition of the extracted EOP solid was characterized for further valorization. Then, a second extraction step was performed in order to extract bioactive triterpenes from the latter solid. The triterpenes content in the extract was determined and the effect of the previous UAWE step on the triterpenes extraction was evaluated. In this case, the use of ultrasound enhanced the extraction of maslinic acid and oleanolic acid from pelletized EOP with no milling requirement. Overall, UAWE can be applied to obtain antioxidant compounds and mannitol as first extraction step from pelletized EOP while supporting the subsequent recovery of triterpenic acids.