Interaction Mechanism between Antibiotics and Humic Acid by UV-Vis Spectrometry

Porous polymer monolithic columns to investigate the interaction of humic substances with herbicides and emerging pollutants by affinity chromatography

BACKGROUND

Understanding the interaction mechanisms and the relevant binding constants between humic acids and emerging or regulated pollutants is of utmost importance in predicting their geochemical mobility, bioavailability, and degradation. Fluorescence spectroscopy, UV-vis spectroscopy, equilibrium dialysis, and solid-phase extraction combined with liquid chromatography-mass spectrometry have been employed to elucidate interactions of humic acids with organic micropollutants, especially pharmaceutical drugs. These methods demand large sample volumes, long equilibration times, and laborious extraction steps which may imply analytical errors. Monolithic high-performance affinity chromatography is an alternative and simpler method to investigate these interactions and determine the binding constants.

RESULTS

Polymer monoliths based on aminated glycidyl methacrylate and ethylene glycol dimethacrylate served to immobilize Cu(II) and then humic acid to produce monolithic affinity chromatography columns with humic acid as the active interaction phase. About 86.5 mg of humic acid was immobilized per gram of polymer. The columns enabled a comparison of the binding strength of humic acid with herbicides and emerging pollutants at 25 °C and pH 6.0 ± 0.1. Paracetamol, acetylsalicylic acid, and salicylic acid did not retain. Among the compounds that interacted with humic acid, the order of increasing affinity, estimated by the global affinity constant (nKa) or partition coefficient (KD) was: caffeine < simazine < atrazine ∼ propazine < benzophenone. The nKa (L mol-1) values ranged from (4.9 ± 0.3) × 102 for caffeine to (1.9 ± 0.3) × 103 for benzophenone, whereas KD (L kg-1) varied from 14 ± 1 to 56 ± 8 for the same compounds.

SIGNIFICANCE AND NOVELTY

To our knowledge, this is the first paper demonstrating the use of a monolithic platform to immobilize supramolecular structures of humic acids exploiting immobilized metal affinity to comparatively evaluate their affinity towards emerging pollutants exploiting the concepts of high-performance affinity chromatography. The proposed approach needs only small amounts of humic acid, which is a relevant feature in preparing columns with humic substances isolated and purified from remote areas.

Investigating the different transformations of tetracycline using birnessite under different reaction conditions and various humic acids

Prior studies have successfully used manganese oxides to facilitate the transformation of tetracycline in aqueous solution. To further understand the kinetic and the transformation pathway of tetracycline via birnessite (δ-MnO2) under different conditions, experiments were conducted at pH levels of 3, 6, and 9 in the presence or absence of Aldrich humic acid (ADHA). Tetracycline removal followed the pseudo-second-order reaction model in all investigated cases, and the removal efficiency (g mg-1 h -1) followed the following trend: pH 3 (0.45/0.27) > pH 6 (0.036/0.087) > pH 9 (0.036/0.103) in the absence/presence of ADHA. Liquid chromatography-mass spectrometry/mass spectrometry results identified five main transformation products at m/z 495, 477, 493, 459, and 415, produced by the transformation reactions, including hydration, oxidation, desaturation, and oxy reduction. Notably, in the presence of ADHA at pH 3, products with higher toxicity secondary (m/z 477 and 495) were reduced, while less toxicity products (m/z 459 and 415) were enhanced. The experiments utilizing tetracycline and δ-MnO2 with varied humic acids (HA) revealed that HA with high polar organic carbon groups, such as O-alkyl, exhibited higher removal efficiency at pH 6. This research offers the first comprehensive insights into the pathway transformations of tetracycline via δ-MnO2 under different pH conditions and HA types. For further understanding, future work should investigate the binding of HA, TTC, and/or Mn2+ and the oxidation capacity of MnO2 after the reaction to clarify Mn2+ elution mechanisms.

Multispectroscopic Characterization of Surface Interaction between Antibiotics and Micro(nano)-sized Plastics from Surgical Masks and Plastic Bottles

Recent studies have shown that plastic particles can sorb antibiotics, and these sorption properties have been examined in various studies; however, the possible mechanism responsible for the interactions requires a deeper investigation in terms of further interaction with living systems. Moreover, the usage of disposable surgical masks and plastic bottles has increased the plastic pollution risk for living systems like humans. Therefore, this study aimed to examine the sorption characteristics between antibiotics (amoxicillin and spiramycin) and plastic particles from surgical masks and plastic bottles through batch sorption experiments. In the study, their surface interactions were characterized using multispectroscopic approaches including FTIR, Raman spectrometry, and SEM-EDX, and various surface indicators (e.g., surface oxidation, deformation, and biological potential) were examined. The sorption results showed that adsorption kinetics and the isotherm of amoxicillin and spiramycin on micro(nano)plastics from surgical masks and plastic bottles closely fit the pseudo-second-order kinetic model and Langmiur isotherm. These results indicated that the evidence for the antibiotic interaction with particles was changes in the surface functional group intensities and up-shifting, and this correlated with the sorption of antibiotics on micro(nano)-sized plastics. The C/N ratio of the plastic particles before and after antibiotic treatment was used as an indicator for the surface biological interaction, and the results showed that C/N ratios of surgical mask particles increased with both types of antibiotic sorption. However, the C/N of the particles from plastic bottles showed antibiotic type-dependence. The surface deformation indicators (e.g., O/C, C=O, C=C, and O-H indices) showed that the O/C ratios of micro(nano)plastics from surgical masks were higher with the amoxicillin and spiramycin sorption, and the C=O indices were positively linked with the amoxicillin sorption stages, whereas the C=C and O-H had a negative correlation with the amoxicillin sorption stages. Moreover, amoxicillin sorption influenced the O/C ratio and indices of O-H and C=C of micro(nano)plastics from plastic bottles in a limited manner. The C=O groups of the micro(nano)plastics from plastic bottles were positively influenced by the spiramycin sorption stages, whereas it was negatively linked with amoxicillin sorption stages. Overall, the findings from surface indicators indicated that the micro(nano)plastics from surgical masks can be more influenced with antibiotic sorption compared to plastic bottles.

Preparation of entrapment-based microcolumns for analysis of drug-humic acid interactions by high-performance affinity chromatography

Reversible interactions between drugs and humic acid in water can be an important factor in determining the bioavailability and effects of these pharmaceuticals as micropollutants in the environment. In this study, microcolumns containing entrapped humic acid were used in high-performance affinity chromatography (HPAC) to examine the binding of this agent with the drugs tetracycline, carbamazepine, ciprofloxacin, and norfloxacin. Parameters that were varied to optimize the entrapment of humic acid within HPLC-grade porous silica included the starting concentration of humic acid, the mass ratio of humic acid vs silica, and the method of mixing the reagents with the support for the entrapment process. The highest retention for the tested drugs was obtained when using supports that were prepared using an initial humic acid concentration of 80 mg mL^-1 and a humic acid vs silica mass ratio of 600 mg per g silica, along with preincubation of the humic acid with hydrazide-activated silica before the addition of a capping agent (i.e., oxidized glycogen). Characterization of the humic acid support was also carried out by means of TGA, FTIR, SEM, and energy-dispersive X-ray spectroscopy. The binding constants measured by HPAC for the given drugs with entrapped Aldrich humic acid gave good agreement with values reported in the literature under similar pH and temperature conditions for this and other forms of humic acid. Besides providing valuable data on the binding strength of various drugs with humic acid, this work illustrates how HPAC may be used as an analytical tool for screening and characterizing the interactions of drugs and man-made contaminants with humic acid or related binding agents in water and the environment.

Potassium ferrate pretreatment promotes short chain fatty acids yield and antibiotics reduction in acidogenic fermentation of sewage sludge

During the acidogenic fermentation converting waste activated sludge (WAS) into short-chain fatty acids (SCFA), hydrolysis of complex organic polymers is a limiting step and the transformation of harmful substances (such as antibiotics) during acidogenic fermentation is unknown. In this study, potassium ferrate (K₂FeO₄) oxidation was used as a pretreatment strategy for WAS acidogenic fermentation to increase the hydrolysis of sludge and destruct the harmful antibiotics. Pretreatment with K₂FeO₄ can effectively increase the SCFA production during acidogenic fermentation and change the distribution of SCFA components. With the dosage of 0.2 g/g TS, the maximum SCFA yield was 4823 mg COD/L, which is 28.3 times that of the control group; acetic acid accounts for more than 90% of the total SCFA. The higher dosage (0.5 g/g TS) can further increase the proportion of acetic acid, but inhibit the overall performance of SCFA production. Apart from the promotion of hydrolysis and acidogenesis, K₂FeO₄ pretreatment can also simultaneously oxidizes and degrades part of the antibiotics in the sludge. When the dosage is 0.5 g/g TS, the degradation efficacy of antibiotics is the most significant, and the contents of ofloxacin, azithromycin, and tetracycline in the sludge are reduced by 69%, 42%, and 50%, respectively. In addition, K₂FeO₄ pretreatment can also promote the release of antibiotics from sludge flocs, which is conducive to the simultaneous degradation of antibiotics in the subsequent biological treatment process.