Removal of parabens from aqueous solution using β-cyclodextrin cross-linked polymer

Evaluating the efficacy of recyclable nanostructured adsorbents for rapid removal of methylparaben from aqueous solutions

In this study, we evaluate the efficiency of two novel nanostructured adsorbents - chitosan-graphitic carbon nitride@magnetite (CS-g-CN@Fe3O4) and graphitic carbon nitride@copper/zinc nanocomposite (g-CN@Cu/Zn NC) - for the rapid removal of methylparaben (MPB) from water. Our characterization methods, aimed at understanding the adsorbents' structures and surface areas, informed our systematic examination of influential parameters including sonication time, adsorbent dosage, initial MPB concentration, and temperature. We applied advanced modeling techniques, such as response surface methodology (RSM), generalized regression neural network (GRNN), and radial basis function neural network (RBFNN), to evaluate the adsorption process. The adsorbents proved highly effective, achieving maximum adsorption capacities of 255 mg g-1 for CS-g-CN@Fe3O4 and 218 mg g-1 for g-CN@Cu/Zn NC. Through genetic algorithm (GA) optimization, we identified the optimal conditions for the highest MPB removal efficiency: a sonication period of 12.00 min and an adsorbent dose of 0.010 g for CS-g-CN@Fe3O4 NC, with an MPB concentration of 17.20 mg L-1 at 42.85 °C; and a sonication time of 10.25 min and a 0.011 g dose for g-CN@Cu/Zn NC, with an MPB concentration of 13.45 mg L-1 at 36.50 °C. The predictive accuracy of the RBFNN and GRNN models was confirmed to be satisfactory. Our findings demonstrate the significant capabilities of these synthesized adsorbents in effectively removing MPB from water, paving the way for optimized applications in water purification.

Double ionic liquid reinforced g-CN nanocomposite for an enhanced adsorption of methylparaben: Mechanism, modeling, and optimization

The efficient removal of organic pollutants, especially pharmaceuticals, from aquatic environments has attracted great attentions. Application of green, multipurpose, and inexpensive compounds is being extensively favorite as adsorbent instead of the traditional chemicals or materials. In this study, sulfonated graphitic carbon nitride was modified with two ionic liquids of polyethyleneimine and choline chloride to create a novel nanocomposite (Sg-CN@IL2 NC) and to use for removal of methylparaben (MeP) from aqueous media. After confirmation of the successful synthesized using different methods, the effective parameters for MeP removal, such as initial MeP concentration, adsorbent dose, sonication time, and temperature, as well as their interactions, were experimentally examined and modeled using response surface methodology (RSM), generalized regression neural network (GRNN), and radial basis function neural network (RBFNN). The models were then optimized using desirability function analysis (DF) and genetic algorithm (GA). The results showed that MeP adsorption: a) can be explained more accurate and reliable using GRNN (AARD% = 11.67, MAE = 15.31, RAE % = 45.42, RRSE % = 55.18, MSE = 435.86, RMSE = 20.70, and R2 = 0.995) than the others; b) reached equilibrium within 7.0 min with a maximum uptake of 267.2 mg/g at a temperature of 45 °C and a neutral pH; c) followed from Freundlich (R2 = 0.999) isotherm and PSO kinetic (R2 = 0.95) models; d) is endothermic and spontaneous; e) is mainly due to π-π stacking, electrostatic and hydrogen bonding interactions. Moreover, Sg-CN@IL2 NC showed an appropriate reusability for up to five cycles. These findings demonstrate the potential of as-prepared NC as an excellent adsorbent for removal of MeP from aqueous media.

Camptothecin: Solubility, In-Vitro Drug Release, and Effect on Human Red Blood Cells and Sperm Cold Preservation

BACKGROUND: Camptothecin (CPT) is an anticancer drug, and is not employed in the clinic because of its high hydrophobicity and low active form stability. CPT may also have potential for use in cold preservation. OBJECTIVE : To overcome these drawbacks, CPT solubility variations in the presence of cyclodextrins (CDs) and polyethylene glycol (PEG) were evaluated by Higuchi solubility experiments. MATERIALS AND METHODS: CPT was encapsulated in different cyclodextrins and polyethylene glycol using a co-evaporation method. The CPT interactions with CDs and PEG 6000 were investigated by Fourier-transformed infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRPD). Then, CPT complexes were evaluated for in-vitro drug release. To evaluate the potential anticancer efficacy of the CPT complexes system, in-vitro cytotoxicity studies on human red blood cells were carried out using UV assay. The impact of the CPT complex systems on sperm motility protection during cold preservation at 4°C was studied using CASA. RESULTS: The dissolution profile of these preparations shows the improvement of the dissolution of the CPT following a fickien diffusion. The CPT solubility and stability improvement were the cause of the cytotoxicity on the red blood cells test. However, CPT alone, encapsulated, dispersed, and chemically modified protected spermatozoids during cold preservation. CONCLUSION: We confirm the interest in CPT encapsulated and dispersed in anticancer treatments. We also found that CPT encapsulated or dispersed could protect sperm against oxidative damage and improve the membrane integrity of human sperm. Consequently, CPT encapsulated our dispersed could eventually be beneficial for infertility therapy.

Antimicrobial Preservatives for Protein and Peptide Formulations: An Overview

Biological drugs intended for multi-dose application require the presence of antimicrobial preservatives to avoid microbial growth. As the presence of certain preservatives has been reported to increase protein and peptide particle formation, it is essential to choose a preservative compatible with the active pharmaceutical ingredient in addition to its preservation function. Thus, this review describes the current status of the use of antimicrobial preservatives in biologic formulations considering (i) appropriate preservatives for protein and peptide formulations, (ii) their physico-chemical properties, (iii) their in-/compatibilities with other excipients or packaging material, and (iv) their interactions with the biological compound. Further, (v) we present an overview of licensed protein and peptide formulations.

Adsorption and catalytic degradation of preservative parabens by graphene-family nanomaterials

Parabens pose increasing threats to human health due to endocrine disruption activity. Adsorption and degradation of parabens by three types of graphene-family nanomaterials (GFNs) were therefore investigated. For a given paraben, the maximum adsorption capacities (Q⁰) followed the order of reduced graphene oxide (RGO) > multilayered graphene (MG) > graphene oxide (GO); for a given GFN, Q⁰ followed the order of butylparaben (BuP) > propylparaben (PrP) > ethylparaben (EtP) > methylparaben (MeP), dominated by hydrophobic interaction. MeP removal by all the three GFNs was highly enhanced (0.55-4.37 times) with the assistance of H₂O₂ due to additional catalytic degradation process, and MG showed the highest removal enhancement. ∙OH was confirmed as the dominant radicals responsible for parabens degradation. For MG and RGO, the metal impurities (Fe, Cu, Mn, and Co) initiated Fenton-like reaction with H₂O₂ to generate ∙OH. GO contained oxygen-centered free radicals, which were responsible for ∙OH formation via transferring electron to H₂O₂. Four degradation byproducts of MeP were identified, including oxalic, propanedioic, fumaric, and 2,5-dihydroxybenzoic acids. Combined with density function theory calculations, the degradation sites and pathways were identified and confirmed. These findings provide useful information on mechanistic understanding towards the adsorption and degradation of parabens by GFNs.

Toxicity and removal of parabens from water: A critical review

Parabens are biocides used as preservatives in food, cosmetics and pharmaceuticals. They possess antibacterial and antifungal activity due to their ability to disrupt cell membrane and intracellular proteins, and cause changes in enzymatic activity of microbial cells. Water, one of our most valuable natural resource, has become a huge reservoir for parabens. Halogenated parabens from chlorination/ozonation of water contaminated with parabens have shown to be even more persistent in water than other types of parabens. Unfortunately, there is dearth of data on their (halogenated parabens) presence and fate in groundwater which serves as a major source of drinking water for a huge population in developing countries. An attempt to neglect the presence of parabens in water will expose man to it through ingestion of contaminated food and water. Although there are reviews on the occurrence, fate and behaviour of parabens in the environment, they largely omit toxicity and removal aspects. This review therefore, presents recent reports on the acute and chronic toxicity of parabens, their estrogenic agonistic and antagonistic activity and also their relationship with antimicrobial resistance. This article further X-rays several techniques that have been employed for the removal of parabens in water and their drawbacks including adsorption, biodegradation, membrane technology and advanced oxidation processes (AOPs). The heterogeneous photocatalytic process (one of the AOPs) appears to be more favoured for removal of parabens due to its ability to mineralize parabens in water. However, more work is needed to improve this ability of heterogeneous photocatalysts. Perspectives that will be relevant for future scientific studies and which will drive policy shift towards the presence of parabens in our drinking waters are also offered. It is hoped that this review will elicit some spontaneous actions from water professionals, scientists and policy makers alike that will provide more data, effective technologies, and adaptive policies that will address the growing threat of the presence of parabens in our environment with respect to human health.

Insights into Paraben Adsorption by Metal-Organic Frameworks for Analytical Applications

Metal-organic frameworks (MOFs) are attractive materials used as sorbents in analytical microextraction applications for contaminants of emerging concern (CECs) from environmental liquid matrices. The demanding specs for a sorbent in the analytical application can be comprehensively studied by considering the interactions of the target analytes with the frameworks by the use of single-crystal X-ray diffraction, computational analysis, and adsorption studies, including the kinetic ones. The current study intends a better understanding of the interactions of target CECs (particularly, propylparaben (PPB) as a model) and three Zn-based layered pillared MOFs: CIM-81 [Zn₂(tz)₂(bdc)] (Htz = 1,2,4-triazole and H₂bdc = 1,4-benzenedicarboxylic acid) and their amino derivatives [Zn₂(NH₂-tz)₂(bdc)] CIM-82 and [Zn₂(tz)₂(NH₂-bdc)] CIM-83 (NH₂-Htz = 3-amino-1,2,4-triazole and NH₂-H₂bdc = 2-amino-1,4-benzenedicarboxylic acid). The crystal structures of the two solvate compounds (dma@CIM-81 (dma = dimethylacetamide) and acetone@CIM-81) were solved by single-crystal X-ray diffraction to determine the points of interaction between the framework and the guest molecules. They also served as a starting point for the computational modeling of the PPB@CIM-81 compound, showing that up to two PPB molecules can be hosted in one of the pores, while only one can be trapped in the second pore type, leading to a maximum theoretical capacity of 291.9 mg g^-1. This value is close to the value obtained by the adsorption isotherm experiment for CIM-81 (283 mg g^-1). This value is, by far, higher than those previously reported for other materials for the removal of PPB from water, and also higher than the experimental values obtained for CIM-82 (54 mg g^-1) and CIM-83 (153 mg g^-1). The kinetics of adsorption is not very fast, with uptake of about 40% in 3 h, although a 70% release in methanol is achieved in 1 h. In addition, a further comparison of performance in analytical microextraction (requiring only 10 mg of CIM-81) was carried out together with chromatographic analysis to support all insights attained, with the method being able to monitor CECs as low as μg L^-1 levels in complex environmental water samples, thus performing successfully for water monitoring even in multicomponent scenarios.

The degradation of paraben preservatives: Recent progress and sustainable approaches toward photocatalysis

Parabens are a class of compounds primarily used as antimicrobial preservatives in pharmaceutical products, cosmetics, and foodstuff. Their widely used field leads to increasing concentrations detected in various environmental matrices like water, soil, and sludges, even detected in human tissue, blood, and milk. Treatment techniques, including chemical advanced oxidation, biological degradation, and physical adsorption processes, have been widely used to complete mineralization or to degrade parabens into less complicated byproducts. All kinds of processes were reviewed to give a completed picture of parabens removal. In light of these treatment techniques, advanced photocatalysis, which is emerging rapidly and widely as an economical, efficient, and environmentally-friendly technique, has received considerable attention. TiO₂-based and non-TiO₂-based photocatalysts play an essential role in parabens degradation. The effect of experimental parameters, such as the concentration of targeted parabens, concentration of photocatalyst, reaction time, and initial solution pH, even the presence of radical scavengers, are surveyed and compared from the literature. Some representative parabens such as methylparaben, propylparaben, and benzylparaben have been successfully studied the reaction pathways and their intermediates in their degradation process. As reported in the literature, the degradation of parabens involves the production of highly reactive species, mainly hydroxyl radicals. These reactive radicals would attack the paraben preservatives, break, and finally mineralize them into simpler inorganic and nontoxic molecules. Concluding perspectives on the challenges and opportunities for photocatalysis toward parabens remediation are also intensively highlighted.

Low-cost disposable Poly(ethyleneimine)-Functionalized Carbon Nanofibers Coated Cellulose Paper as efficient solid phase extraction sorbent material for the extraction of Parahydroxybenzoates from environmental waters

Parahydroxybenzoates (parabens) are considered as emerging environmental contaminants because of their extensive usage in our daily life products, causing parabens contamination into environmental water systems and lead to toxic effects on environmental health. This study describes a greener extraction method using a new cationic polymer poly (ethyleneimine) functionalized acid-treated carbon nanofibers (PEI-CNFs) coated cellulose paper (CP) as solid-phase extraction (SPE) sorbent material for the extraction of parabens from environmental water samples. The fabrication of PEI-CNFs modified CP was confirmed using field-emission scanning electron microscope, transmission electron microscopy, and fourier-transformer infrared spectroscopy techniques. Various factors affecting the adsorption and desorption of parabens on PEI-CNFs@CP and its extraction efficiencies were studied using HPLC-UV analysis. Under the optimal experimental conditions, maximum extraction efficiencies were achieved for four target parabens, and PEI-CNFs@CP/HPLC-UV method exhibited excellent linearities ranged from 0.5-50 ng mL^-1 with regression coefficient values were between 0.9952-0.9970. The presented method showed good sensitivity with quantification limits between 0.5-0.75 ng mL^-1 and detection limits between 0.1-0.25 ng mL^-1. The developed technique was applied for the real sample analysis (river, lake, domestic sewage water, and drinking tap water). The spiked recovery revealed good recoveries between 86.8-116.0% with RSD less than 8.8% for all the water samples. These results proved that it a simple, fast, efficient, low-cost, and eco-friendly method for the extraction and determination of parabens in environmental water samples and can be applied as a routine analytical tool in environmental monitoring and quality control laboratories.

Comparative studies on the separation of endocrine disrupting compounds from aquatic environment by emulsion liquid membrane and hollow fiber supported liquid membrane

Endocrine disrupting compounds have been found to limit the natural working of the endocrine system like synthesis, secretion, transference and binding. Endocrine disrupting compounds are released from humans, animals and from production industries to soil, surface water and sediments mostly through the sewage treatment system. Studies have revealed the impact of these compounds on the nervous system, lungs, liver, thyroid, prostate, metabolism, obesity and reproductive system. So removal of these compounds from sewage water/wastewater by appropriate processes is essential. Conventional techniques like coagulation, precipitation, flocculation, microfiltration and ultrafiltration are effective for the removal of these compounds but limitations like low molecular weight of these compounds and pore size of membrane restricts the complete removal. Liquid membrane is a promising technology which combines the steps like extraction and stripping in a single step thereby providing the instantaneous removal and recovery of solutes and also results in high selectivity and savings of chemicals. This paper mainly focuses on the use of liquid membrane techniques like emulsion liquid membrane and hollow fiber supported liquid membrane which are the promising techniques for the removal of endocrine disrupting compounds from aqueous streams. The working principle, mechanism and implementation of these two techniques in the removal of several endocrine disrupting compounds from aquatic streams are also discussed.

Hydrothermal Synthesis of rGO-TiO2 Composites as High-Performance UV Photocatalysts for Ethylparaben Degradation

A series of reduced graphene oxide-TiO2 composites (rGO-TiO2) were prepared by hydrothermal treatment using graphite and titanium isopropoxide as raw materials. The structural, surface, electronic, and optical properties of the prepared composites were extensively characterized by N2 adsorption, FTIR, XRD, XPS, Raman spectroscopy, and DRS. GO was found to be effectively reduced and TiO2 to be in pure anatase phase in all composites obtained. Finally, experiments were performed to evaluate the effectiveness of these new materials as photocatalysts in the degradation of ethylparaben (EtP) by UV radiation. According to the band-gap energies obtained (ranging between 3.09 eV for 4% rGO-TiO2 to 2.55 eV for 30% rGO-TiO2), the rGO-TiO2 composites behave as semiconductor materials. The photocatalytic activity is highest with a rGO content of 7 wt% (7% rGO-TiO2), being higher than observed for pure TiO2 (Eg = 3.20 eV) and achieving 98.6% EtP degradation after only 40 min of treatment. However, the degradation yield decreases with higher percentages of rGO. Comparison with rGO-P25 composites showed that a better photocatalytic performance in EtP degradation is obtained with synthesized TiO2 (rGO-TiO2), probably due to the presence of the rutile phase (14.1 wt %) in commercial P25.

An efficient and robust exfoliated bentonite/Ag3PO4/AgBr plasmonic photocatalyst for degradation of parabens

Efficient visible-light-driven heterojunction photocatalysts have attracted broad interest owing to their promising adsorption and degradation performances in the removal of organic pollutants. In this study, a mesoporous exfoliated bentonite (EB)/Ag₃PO₄/AgBr (30%) photocatalyst was obtained by stripping and exfoliating bentonite as the support for loading Ag₃PO₄ and AgBr. The particle size ranges of Ag₃PO₄ and AgBr were about 10–30 nm and 5–10 nm, respectively. The exfoliated bentonite could greatly improve the dispersion and adsorption of Ag₃PO₄ and AgBr, and significantly enhance the stability of the material during paraben photodegradation. 0.2 g L⁻¹ methylparaben (MPB) was completely decomposed over the EB/Ag₃PO₄/AgBr (30%) in 40 min under visible light irradiation. In addition, the photocatalytic activity of EB/Ag₃PO₄/AgBr (30%) remained at about 91% after five recycling runs manifesting that EB/Ag₃PO₄/AgBr (30%) possessed excellent stability. Radical quenching tests revealed that holes (h⁺) and hydroxyl radicals (·OH) were the major radicals. They attacked the side chain on the benzene ring of parabens, which were gradually oxidized to the intermediates, such as benzoic acid, 3-hydroxybenzoic acid, 4-hydroxybenzoic acid, azelaic acid, and eventually became CO₂ and H₂O. The enhancement of photocatalytic activity and photo-stability could be ascribed to the stable structural characteristics, enlarged surface area, high absorption ability, and improved light absorption ability from loading Ag₃PO₄ onto EB. Meanwhile, the matched energy levels of Ag₃PO₄ and AgBr made the photoelectron–hole pairs separate and transfer effectively at the interfaces. As a result, the photocatalytic properties of EB/Ag₃PO₄/AgBr (30%) composites were enhanced.

A mesoporous exfoliated bentonite (EB)/Ag₃PO₄/AgBr (30%) photocatalyst was designed to combine various functions to achieve efficient photodegradation of parabens.

Parabens Adsorption onto Activated Carbon: Relation with Chemical and Structural Properties

Parabens (alkyl-p-hidroxybenzoates) are antimicrobial preservatives used in personal care products, classified as an endocrine disruptor, so they are considered emerging contaminants. A raw version of activated carbons obtained from African palm shell (Elaeis guineensis) modified chemically by impregnation with salts of CaCl₂ (GC2), MgCl₂ (GM2) and Cu(NO₃)₂ (GCu2) at 2% wt/v and carbonized in CO₂ atmosphere at 1173 K was prepared. The process of adsorption of methyl (MePB) and ethylparaben (EtPB) from aqueous solution on the activated carbons at 18 °C was studied and related to the interactions between the adsorbate and the adsorbent, which can be quantified through the determination of immersion enthalpies in aqueous solutions of corresponding paraben, showing the lowest-value carbon GM2, which has a surface area of 608 m² × g^-1, while the highest values correspond to the activated carbon GCu2, with a surface area of 896 m² × g^-1 and the highest content of surface acid sites (0.42 mmol × g^-1), such as lactonic and phenolic compounds, which indicates that the adsorbate-adsorbent interactions are favored by the presence of these, with interaction enthalpies that vary between 5.72 and 51.95 J × g^-1 for MePB adsorption and 1.24 and 52.38 J × g^-1 for EtPB adsorption showing that the process is endothermic.

β-Cyclodextrin Assisted Liquid-Liquid Microextraction Based on Solidification of the Floating Organic Droplets Method for Determination of Neonicotinoid Residues

An efficient and environment-friendly microextraction method, namely, β-cyclodextrin assisted liquid–liquid microextraction, based on solidification of the floating organic droplets method coupled with HPLC is investigated for the sensitive determination of trace neonicotinoid pesticide residues. In this method, β-cyclodextrin is used as a disperser solvent, while 1-octanol is selected as an extraction solvent. β-cyclodextrins was found to decrease interfacial tension and increase the contact area between the organic and water phases with the help of centrifugation. A cloudy solution was rapidly formed and then centrifuged to complete phase separation. Various key parameters influencing extraction efficiency were systematically investigated and optimized; they include salt addition, concentration of β-cyclodextrin, and volume of extraction solvent (1-octanol). Under optimum conditions, good linearity was obtained with coefficient for determination (R²) greater than 0.99. A low limit of detection, high enrichment factor, and good recovery (83 – 132) were achieved. This proves that the proposed method can be applied to determine trace neonicotinoid pesticide residues in natural surface water samples.

β-Cyclodextrin conjugated bifunctional isocyanate linker polymer for enhanced removal of 2,4-dinitrophenol from environmental waters

In this work, we reported the synthesis, characterization and adsorption study of two β-cyclodextrin (βCD) cross-linked polymers using aromatic linker 2,4-toluene diisocyanate (2,4-TDI) and aliphatic linker 1,6-hexamethylene diisocyanate (1,6-HDI) to form insoluble βCD-TDI and βCD-HDI. The adsorption of 2,4-dinitrophenol (DNP) on both polymers as an adsorbent was studied in batch adsorption experiments. Both polymers were well characterized using various tools that include Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller analysis and scanning electron microscopy, and the results obtained were compared with the native βCD. The adsorption isotherm of 2,4-DNP onto polymers was studied. It showed that the Freundlich isotherm is a better fit for βCD-TDI, while the Langmuir isotherm is a better fit for βCD-HMDI. The pseudo-second-order kinetic model represented the adsorption process for both of the polymers. The thermodynamic study showed that βCD-TDI polymer was more favourable towards 2,4-DNP when compared with βCD-HDI polymer. Under optimized conditions, both βCD polymers were successfully applied on various environmental water samples for the removal of 2,4-DNP. βCD-TDI polymer showed enhanced sorption capacity and higher removal efficiency (greater than 80%) than βCD-HDI (greater than 70%) towards 2,4-DNP. The mechanism involved was discussed, and the effects of cross-linkers on βCD open up new perspectives for the removal of toxic contaminants from a body of water.

A study on the removal of propyl, butyl, and benzyl parabens via newly synthesised ionic liquid loaded magnetically confined polymeric mesoporous adsorbent

This study investigated the effectiveness of ionic liquids (ILs) loaded onto the surface of a polymeric adsorbent (βCD-TDI) grafted with modified magnetic nanoparticles (MNPs) via an analysis of water treatment, which resulted in high removal of selected endocrine-disrupting chemicals (parabens). The syntheses of MNPs, MNP-βCD-TDI, and IL-MNP-βCD-TDI were characterised and compared using Fourier transform infrared (FT-IR) spectroscopy, carbon-hydrogen-nitrogen (CHN) analysis, vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), the Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), and X-ray diffraction (XRD). The results of SEM and TEM indicated that the pore size distribution exhibited mesoporous characteristics with a small surface area (BET analysis: 42.95 m2 g-1). Furthermore, a preliminary sorption experiment demonstrated the ability of IL-MNP-βCD-TDI to enhance not only the sorption capacity, but also the removal of propyl paraben (PP), butyl paraben (BP), and benzyl paraben (ArP). The adsorption process appeared to be pH-dependent, and hence the optimum pH of 6 was selected for a subsequent batch adsorption study of all the studied parabens with an equilibrium time of 80 min. Next, in an attempt to investigate the interactions that occur between the adsorbent and the adsorbates, adsorption kinetics and isotherm studies were performed. All the studied parabens were found to best fit pseudo-second-order kinetics and the Freundlich isotherm with R 2 > 0.98 at room temperature (298 K). The interaction of the host-guest inclusion complex and the π-π interaction between βCD and a selected paraben compound (ArP) were identified by performing 1H nuclear magnetic resonance (NMR), together with ultraviolet-visible (UV-vis) spectroscopic analysis. Finally, the adsorption efficiency of the developed material was practically tested on tap water, drain water, and industrial wastewater, which revealed a significant removal of parabens of up to 60-90% in comparison with a prior analysis.

Heat-activated persulfate oxidation of methyl- and ethyl-parabens: Effect, kinetics, and mechanism

We evaluated the degradation of methylparaben (MeP) and ethylparaben (EtP), two representative parabens, using the heat-activated persulfate system in a laboratory. Both sulfate and hydroxyl radicals contributed to the removal of the two parabens. The degradations of both MeP and EtP were improved by increasing the heating temperature or persulfate dose in accordance with a pseudo-first-order reaction model. The oxidation efficiency of parabens was found to be pH-dependent; decreasing in the order pH 5.0 > 7.0 > 9.0. The presence of chloride, bicarbonate, or humic acid was found to inhibit the degradation of the two parabens to some extent because of competition for the reactive radicals, with humic acid having the most serious effect. Dealkylation of the methyl unit, decarboxylation of the carboxylic group, and subsequent hydrolysis are proposed to be involved in the degradation pathway of MeP. The results suggest that the heat-activated persulfate system might be efficiently applied in the treatment of paraben-containing water samples. This was also supported by the results of applying this system to treat a real water sample containing both MeP and EtP.

Graphene oxide/β-cyclodextrin composite as fiber coating for high efficiency headspace solid phase microextraction of organophosphate ester flame retardants in environmental water

The preparation of a GO/β-CD sol–gel stainless steel fiber coating and its application for HS-SPME of OPFR.

Polyurethane types, synthesis and applications – a review

Polyurethanes (PUs) are a class of versatile materials with great potential for use in different applications, especially based on their structure–property relationships.

Exploiting β-cyclodextrin in molecular imprinting for achieving recognition of benzylparaben in aqueous media

The molecularly imprinted polymer (MIP) based on methacrylic acid functionalized β-cyclodextrin (MAA-β-CD) monomer was synthesized for the purpose of selective recognition of benzylparaben (BzP). The MAA-β-CD monomer was produced by bridging a methacrylic acid (MAA) and β-cyclodextrin (β-CD) using toluene-2,4-diisocyanate (TDI) by reacting the –OH group of MAA and one of the primary –OH groups of β-CD. This monomer comprised of triple interactions that included an inclusion complex, π–π interaction, and hydrogen bonding. To demonstrate β-CD performance in MIPs, two MIPs were prepared; molecularly imprinted polymer-methacrylic acid functionalized β-cyclodextrin, MIP(MAA-β-CD), and molecularly imprinted polymer-methacrylic acid, MIP(MAA); both prepared by a reversible addition fragmentation chain transfer polymerization (RAFT) in the bulk polymerization process. Both MIPs were characterized using the Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and Brunauer-Emmett-Teller (BET). The presence of β-CD not only influenced the morphological structure, it also affected the specific surface area, average pore diameter, and total pore volume of the MIP. The rebinding of the imprinting effect was evaluated in binding experiments, which proved that the β-CD contributed significantly to the enhancement of the recognition affinity and selective adsorption of the MIP.

One-pot synthesis of micro/nano structured β-Bi2O3 with tunable morphology for highly efficient photocatalytic degradation of methylparaben under visible-light irradiation

Micro/nanostructures β-Bi₂O₃ with tunable morphologies were synthesized via an one-pot solvothermal–calcining route for efficient visible-light photocatalytic removal of methylparaben from water.

Molecular imprinted polymer of methacrylic acid functionalised β-cyclodextrin for selective removal of 2,4-dichlorophenol

This work describes methacrylic acid functionalized β-cyclodextrin (MAA-βCD) as a novel functional monomer in the preparation of molecular imprinted polymer (MIP MAA-βCD) for the selective removal of 2,4-dichlorophenol (2,4-DCP). The polymer was characterized using Fourier Transform Infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The influence of parameters such as solution pH, contact time, temperature and initial concentrations towards removal of 2,4-DCP using MIP MAA-βCD have been evaluated. The imprinted material shows fast kinetics and the optimum pH for removal of 2,4-DCP is pH 7. Compared with the corresponding non-imprinted polymer (NIP MAA-βCD), the MIP MAA-βCD exhibited higher adsorption capacity and outstanding selectivity towards 2,4-DCP. Freundlich isotherm best fitted the adsorption equilibrium data of MIP MAA-βCD and the kinetics followed a pseudo-second-order model. The calculated thermodynamic parameters showed that adsorption of 2,4-DCP was spontaneous and exothermic under the examined conditions.

Photodegradation of parabens by Fe(III)-citrate complexes at circumneutral pH: matrix effect and reaction mechanism

The photodegradation of four parabens including methyl-, ethyl-, propyl-, and butyl-paraben in the presence of Fe(III)-citrate complexes under simulated sunlight was investigated. The degradation of parabens increased with decreasing pH within the range of 5.0-8.0 at the Fe(III)-to-citrate ratio of 10:150 (μM). The addition of low-molecular-weight carboxylic acids showed different effects on the photodegradation of methylparaben. The low-photoreactive carboxylic acids inhibited the photodegradation of methylparaben in the order of formic acid>succinic acid>acetic acid>malonic acid. In contrast, oxalic acid enhanced the photodegradation and exhibited appreciable synergistic effect with Fe(III)-citrate at concentration higher than 500 μM. Up to 99.0% of substrate was degraded after 30 min at pH6.0 in the Fe(III)-citrate-oxalate system. The various fractions of fulvic acid inhibited the photodegradation of methylparaben. The inhibition increased with increasing nominal molecular weight of fractionated fulvic acid. Moreover, the photodegradation of methylparaben was inhibited in natural waters in the order of Liangzi Lake<Donghu Lake<Changjiang River≈Seawater. The photoproducts of methylparaben were identified by GC-MS analyses and the degradation pathway was proposed.

Synthesis and characterization of β-cyclodextrin functionalized ionic liquid polymer as a macroporous material for the removal of phenols and As(V)

β-Cyclodextrin-ionic liquid polymer (CD-ILP) was first synthesized by functionalized β-cyclodextrin (CD) with 1-benzylimidazole (BIM) to form monofunctionalized CD (βCD-BIMOTs) and was further polymerized using a toluene diisocyanate (TDI) linker to form insoluble CD-ILP (βCD-BIMOTs-TDI). The βCD-BIMOTs-TDI polymer was characterized using various tools and the results obtained were compared with those derived from the native β-cyclodextrin polymer (βCD-TDI). The SEM result shows that the presence of ionic liquid (IL) increases the pore size, while the thermo gravimetric analysis (TGA) result shows that the presence of IL increases the stability of the polymer. Meanwhile, Brunauer-Emmett-Teller (BET) results show that βCD-BIMOTs-TDI polymer has 1.254 m(2)/g surface areas and the Barret-Joyner-Halenda (BJH) pore size distribution result reveals that the polymer exhibits macropores with a pore size of 77.66 nm. Preliminary sorption experiments were carried out and the βCD-BIMOTs-TDI polymer shows enhanced sorption capacity and high removal towards phenols and As(V).

Cloud point extraction of parabens using non-ionic surfactant with cylodextrin functionalized ionic liquid as a modifier

A cloud point extraction (CPE) process using non-ionic surfactant (DC193C) to extract selected paraben compounds from water samples was investigated using reversed phase high performance liquid chromatography (RP-HPLC). The CPE process with the presence of β-cyclodextrin (βCD) functionalized ionic liquid as a modifier (CPE-DC193C-βCD-IL) is a new extraction technique that has been applied on the optimization of parameters, i.e., pH, βCD-IL concentration and phase volume ratio. This CPE-DC193C-βCD-IL method is facilitated at 30 °C, showing great losses of water content in the surfactant-rich phase, resulting in a high pre-concentration factor and high distribution coefficient. The developed method CPE-DC193C-βCD-IL did show enhanced properties compared to the CPE method without the modifier (CPE-DC193C). The developed method of CPE-DC193C-βCD-IL gives an excellent performance on the detection of parabens from water samples with the limit of detection falling in the range of 0.013-0.038 µg mL-1. Finally, the inclusion complex formation, hydrogen bonding, and π-π interaction between the βCD-IL, benzyl paraben (ArP), and DC 193C were proven using 1H NMR and 2D NOESY spectroscopy.

Removal of 2,4-dichlorophenol using cyclodextrin-ionic liquid polymer as a macroporous material: characterization, adsorption isotherm, kinetic study, thermodynamics

Cyclodextrin-ionic liquid polymer (βCD-BIMOTs-TDI) was firstly synthesized using functionalized β-Cyclodextrin (CD) with 1-benzylimidazole (BIM) to form monofunctionalized CD (βCD-BIMOTs) and was further polymerized using toluene diisocyanate (TDI) linker to form insoluble βCD-BIMOTs-TDI. SEM characterization result shows that βCD-BIMOTs-TDI exhibits macropore size while the BET result shows low surface area (1.254 m(2)g(-1)). The unique properties of the ILs allow us to produce materials with different morphologies. The adsorption isotherm and kinetics of 2,4-dichlorophenol (2,4-DCP) onto βCD-BIMOTs-TDI is studied. Freundlich isotherm and pseudo-second order kinetics are found to be the best to represent the data for 2,4-DCP adsorption on the βCD-BIMOTs-TDI. The presence of macropores decreases the mass transfer resistance and increases the adsorption process by reducing the diffusion distance. The change in entropy (ΔS°) and heat of adsorption (ΔH°) for 2,4-DCP on βCD-BIMOTs-TDI were estimated as -55.99 J/Kmol and -18.10 J/mol, respectively. The negative value of Gibbs free energy (ΔG°) indicates that the adsorption process is thermodynamically feasible, spontaneous and chemically controlled. Finally, the interactions between the cavity of βCD-BIMOTs and 2,4-DCP are investigated and the results shows that the inclusion of the complex formation and π-π interaction are the main processes involved in the adsorption process.

Sorption of ochratoxin A from aqueous solutions using β-cyclodextrin-polyurethane polymer

The ability of a cyclodextrin-polyurethane polymer to remove ochratoxin A from aqueous solutions was examined by batch rebinding assays. The results from the aqueous binding studies were fit to two parameter models to gain insight into the interaction of ochratoxin A with the nanosponge material. The ochratoxin A sorption data fit well to the heterogeneous Freundlich isotherm model. The polymer was less effective at binding ochratoxin A in high pH buffer (9.5) under conditions where ochratoxin A exists predominantly in the dianionic state. Batch rebinding assays in red wine indicate the polymer is able to remove significant levels of ochratoxin A from spiked solutions between 1–10 μg·L⁻¹. These results suggest cyclodextrin nanosponge materials are suitable to reduce levels of ochratoxin A from spiked aqueous solutions and red wine samples.