Subminimal inhibitory concentrations of the disinfectant benzalkonium chloride select for a tolerant subpopulation of Escherichia coli with inheritable characteristics

Salinity-mediated enhancement of quaternary ammonium compounds resistance and removal in endophytic bacteria LSE01

The widespread usage of quaternary ammonium compounds (QACs) as disinfectants during the COVID-19 pandemic poses significant environmental risks, such as toxicity to organisms and the emergence of superbugs. In this study, different inorganic salts (NaCl, KCl, CaCl2, MgCl2) were used to induce endophytes LSE01 isolated from hyperaccumulating plants. After five generations of cultivation under 80 g/L NaCl, the minimum inhibitory concentration (MIC) of LSE01 to QACs increased by about 3-fold, while its degradation extent increased from 8% to 84% for C12BDMA-Cl and 5%-89% for C14BDMA-Cl. Transmission electron microscopy (TEM) and three-dimensional fluorescence spectra indicated that the cells induced by high concentration of salt caused plasmolysis and secreted more bound extracellular polymeric substances (B-EPS); these changes are likely to be an important reason for the observed increased resistance and enhanced degradation extent of LSE01 to QACs. Our findings suggest that salt-induction could be an effective way to enhance the resistance and removal of toxic organic pollutants by functional microorganisms.

Applications of quaternary ammonium compounds in the prevention and treatment of oral diseases: State-of-the-art and future directions

OBJECTIVES

The aim of this review is to comprehensively summarize the state-of-the-art developments of quaternary ammonium compounds (QACs) in the prevention and treatment of oral diseases. By discussing the structural diversity and the potential killing mechanism, we try to offer some insights for the future research of QACs.

DATA, SOURCES & STUDY SELECTION

A literature search was conducted in electronic databases (Web of Science, PubMed, Medline, and Scopus). Publications that involved the applications of QACs, especially those related to the prevention and treatment of oral diseases, are included.

RESULTS

We have reviewed the relevant research on QACs over the past two decades. The research results indicate that the current applications are mainly focused on dental material modification and direct pharmacological interventions. Concurrently, challenges such as potential risks to normal tissues and impediments in drug resistance and microbial persistence present certain application constraints. The latest studies have encompassed the exploration of smart materials and nanoparticle formulations.

CONCLUSIONS

The killing mechanism may possess a threshold related to charge density. However, the exact process remains enigmatic. The structural diversity and the exploration of intelligent materials and nanoparticle formulations provide directions in development of novel QACs.

CLINICAL SIGNIFICANCE

The intricate oral anatomy, combined with the multifaceted oral microbiome, necessitates specialized materials for the targeted prevention and treatment of oral pathologies. QACs represent a cohort of compounds distinguished by potent anti-infective and anti-tumor attributes. Innovations in intelligent materials and nanoparticle formulations amplify their potential in significantly advancing the prevention and therapeutic interventions for oral diseases.

Impact of Environmental Sub-Inhibitory Concentrations of Antibiotics, Heavy Metals, and Biocides on the Emergence of Tolerance and Effects on the Mutant Selection Window in E. coli

Bacteria's ability to withstand the detrimental effects of antimicrobials could occur as resistance or tolerance with the minimum inhibitory concentration, the mutant prevention concentration, and the mutant selection window as salient concepts. Thus, this study assessed the impact of exposure to extremely high doses of ampicillin on the level of persistence and tolerance development in isolates previously exposed to different concentrations of selected antibiotics, biocides, and heavy metals. These isolates were previously exposed to oxytetracycline (OXYTET), amoxicillin (AMX), copper (Cu), zinc (Zn), benzalkonium chloride (BAC) 10, dimethylammonium chloride (DADMAC) 12 and a combination of all the individual pollutants (ALL). The isolates were exposed to very high concentrations (25 × MIC) of ampicillin, and their tolerance was calculated as the time required to kill 99.9% of the bacterial population (MDK99.9). The MDK99.9 increased by 30 to 50% in test isolates (DADMAC, OXYTET, Zinc = 28 h; BAC, Copper = 30 h; amoxycillin, ALL = 26 h) compared to the untreated control. BAC-exposed isolates decreased from 2.5 × 108 CFU/mL to 2.5 × 104 CFU/mL on the second day, displaying the highest tolerance increase. The tolerance appeared to originate from two sources, i.e., stochastic persistence and genetic-induced persistence, involving multiple genes with diverse mechanisms. The mutant selection window of the isolates to ampicillin, amoxicillin, and oxytetracycline also slightly increased compared to the control, indicating the selective survival of persister cells during the 30-day exposure. These findings indicate that bacterial exposure to sub-inhibitory concentrations of environmental chemical stressors may not always result in the development of antimicrobial resistance but could initiate this process by selecting persisters that could evolve into resistant isolates.

Exposure of Salmonella enterica serovar 1,4,[5],12:i:- to benzalkonium chloride leads to acquired resistance to this disinfectant and antibiotics

AIMS

Disinfectants such as benzalkonium chloride (BC), extensively used in animal farms and food-processing industries, contribute to the development of adaptive and cross-resistance in foodborne pathogens, posing a serious threat to food safety and human health. The purpose of this study is to explore whether continuous exposure of Salmonella enterica serovar 1,4,[5],12:i:- (S. 1,4,[5],12:i:-) to sublethal concentrations of BC could result in acquired resistance to this agent and other environmental stresses (e.g. antibiotics, heat, and acid).

METHODS AND RESULTS

BC tolerance increased in all tested strains after exposure to gradually increasing concentrations of BC, with increases in minimum inhibitory concentrations between two and sixfold. The survival rate of BC-adapted strains was significantly (P < 0.05) higher than that of their wild-type (non-adapted) counterparts in lethal concentrations of BC. In addition, significant reductions (P < 0.05) in zeta potential were observed in BC-adapted strains compared to wild-type ones, indicating that a reduction in cell surface charge was a cause of adaptative resistance. More importantly, two BC-adapted strains exhibited increased antibiotic resistance to levofloxacin, ceftazidime, and tigecycline, while gene mutations (gyrA, parC) and antibiotic efflux-related genes (acrB, mdsA, mdsB) were detected by genomic sequencing analysis. Moreover, the tolerance of BC-adapted strains to heat (50, 55, and 60°C) and acid (pH 2.0, 2.5) was strain-dependent and condition-dependent.

CONCLUSIONS

Repeated exposure to sublethal concentrations of BC could result in the emergence of BC- and antibiotic-resistant S. 1,4,[5],12:i:- strains.

Quaternary ammonium disinfectants and antiseptics: tolerance, resistance and potential impact on antibiotic resistance

BACKGROUND

Due to the substantial increase in the use of disinfectants containing quaternary ammonion compounds (QACs) in healthcare and community settings during the COVID-19 pandemic, there is increased concern that heavy use might cause bacteria to develop resistance to QACs or contribute to antibiotic resistance. The purpose of this review is to briefly discuss the mechanisms of QAC tolerance and resistance, laboratory-based evidence of tolerance and resistance, their occurrence in healthcare and other real-world settings, and the possible impact of QAC use on antibiotic resistance.

METHODS

A literature search was conducted using the PubMed database. The search was limited to English language articles dealing with tolerance or resistance to QACs present in disinfectants or antiseptics, and potential impact on antibiotic resistance. The review covered the period from 2000 to mid-Jan 2023.

RESULTS

Mechanisms of QAC tolerance or resistance include innate bacterial cell wall structure, changes in cell membrane structure and function, efflux pumps, biofilm formation, and QAC degradation. In vitro studies have helped elucidate how bacteria can develop tolerance or resistance to QACs and antibiotics. While relatively uncommon, multiple episodes of contaminated in-use disinfectants and antiseptics, which are often due to inappropriate use of products, have caused outbreaks of healthcare-associated infections. Several studies have identified a correlation between benzalkonium chloride (BAC) tolerance and clinically-defined antibiotic resistance. The occurrence of mobile genetic determinants carrying multiple genes that encode for QAC or antibiotic tolerance raises the concern that widespread QAC use might facilitate the emergence of antibiotic resistance. Despite some evidence from laboratory-based studies, there is insufficient evidence in real-world settings to conclude that frequent use of QAC disinfectants and antiseptics has promoted widespread emergence of antibiotic resistance.

CONCLUSIONS

Laboratory studies have identified multiple mechanisms by which bacteria can develop tolerance or resistance to QACs and antibiotics. De novo development of tolerance or resistance in real-world settings is uncommon. Increased attention to proper use of disinfectants is needed to prevent contamination of QAC disinfectants. Additional research is needed to answer many questions and concerns related to use of QAC disinfectants and their potential impact on antibiotic resistance.

Antibiofilm Action of Plant Terpenes in Salmonella Strains: Potential Inhibitors of the Synthesis of Extracellular Polymeric Substances

Salmonella can form biofilms that contribute to its resistance in food processing environments. Biofilms are a dense population of cells that adhere to the surface, creating a matrix composed of extracellular polymeric substances (EPS) consisting mainly of polysaccharides, proteins, and eDNA. Remarkably, the secreted substances, including cellulose, curli, and colanic acid, act as protective barriers for Salmonella and contribute to its resistance and persistence when exposed to disinfectants. Conventional treatments are mostly ineffective in controlling this problem; therefore, exploring anti-biofilm molecules that minimize and eradicate Salmonella biofilms is required. The evidence indicated that terpenes effectively reduce biofilms and affect their three-dimensional structure due to the decrease in the content of EPS. Specifically, in the case of Salmonella, cellulose is an essential component in their biofilms, and its control could be through the inhibition of glycosyltransferase, the enzyme that synthesizes this polymer. The inhibition of polymeric substances secreted by Salmonella during biofilm development could be considered a target to reduce its resistance to disinfectants, and terpenes can be regarded as inhibitors of this process. However, more studies are needed to evaluate the effectiveness of these compounds against Salmonella enzymes that produce extracellular polymeric substances.

The effect of disinfectants and antiseptics on co- and cross-selection of resistance to antibiotics in aquatic environments and wastewater treatment plants

The outbreak of the SARS-CoV-2 pandemic led to increased use of disinfectants and antiseptics (DAs), resulting in higher concentrations of these compounds in wastewaters, wastewater treatment plant (WWTP) effluents and receiving water bodies. Their constant presence in water bodies may lead to development and acquisition of resistance against the DAs. In addition, they may also promote antibiotic resistance (AR) due to cross- and co-selection of AR among bacteria that are exposed to the DAs, which is a highly important issue with regards to human and environmental health. This review addresses this issue and provides an overview of DAs structure together with their modes of action against microorganisms. Relevant examples of the most effective treatment techniques to increase the DAs removal efficiency from wastewater are discussed. Moreover, insight on the resistance mechanisms to DAs and the mechanism of DAs enhancement of cross- and co-selection of ARs are presented. Furthermore, this review discusses the impact of DAs on resistance against antibiotics, the occurrence of DAs in aquatic systems, and DA removal mechanisms in WWTPs, which in principle serve as the final barrier before releasing these compounds into the receiving environment. By recognition of important research gaps, research needs to determine the impact of the majority of DAs in WWTPs and the consequences of their presence and spread of antibiotic resistance were identified.

In-use contamination of a hospital-grade disinfectant

BACKGROUND

Microbiological monitoring of disinfection of high-touch surfaces identified heavy growth of Serratia marcescens and Achromobacter xylosoxidans not present on surfaces before disinfection, suggesting contamination of the disinfectant used.

METHODS

An investigation included interview of the housekeeper involved, level of bacterial contamination of the in-use quaternary ammonium (Quat) disinfectant, bactericidal activity of the contaminated disinfectant, pulsed field gel electrophoresis of S.marcescens and Achromobacter isolates, survival of S. marcescens on dry surfaces, and genome sequencing to identify possible Quat resistance genes.

RESULTS

The housekeeper, who seldom cleaned patient rooms, had used the disinfectant for months without emptying and drying the bucket between uses. The contaminated disinfectant contained 9.3 × 10⁴ CFU of S. marcescens plus A. xylosoxidans. The log₁₀ reduction of S. marcescens by fresh Quat was 10²-fold lower than that achieved against a control strain (S. marcescens ATCC 13380). Genome sequencing of S. marcescens isolates identified the following genes previously shown to encode for efflux pumps associated with Quat resistance: sdeXY, sdeAB, smfY, and a sugE-like gene.

CONCLUSIONS

Failure to follow existing guidelines and manufacturer's instructions for use resulted in contamination by A. xylosoxidans and by S. marcescens that possessed multiple genes associated with Quat resistance.

Impact of benzalkonium chloride, benzethonium chloride and chloroxylenol on bacterial antimicrobial resistance

This review examined 3655 articles on benzalkonium chloride (BKC), benzethonium chloride (BZT) and chloroxylenol (CHO) aiming to understand their impact on antimicrobial resistance. Following the application of inclusion/exclusion criteria, only 230 articles were retained for analysis; 212 concerned BKC, with only 18 for CHO and BZT. Seventy-eight percent of studies used MIC to measure BKC efficacy. Very few studies defined the term 'resistance' and 85% of studies defined 'resistance' as <10-fold increase (40% as low as 2-fold) in MIC. Only a few in vitro studies reported on formulated products and when they did, products performed better. In vitro studies looking at the impact of BKC exposure on bacterial resistance used either a stepwise training protocol or exposure to constant BKC concentrations. In these, BKC exposure resulted in elevated MIC or/and MBC, often associated with efflux, and at time, a change in antibiotic susceptibility profile. The clinical relevance of these findings was, however, neither reported nor addressed. Of note, several studies reported that bacterial strains with an elevated MIC or MBC remained susceptible to the in-use BKC concentration. BKC exposure was shown to reduce bacterial diversity in complex microbial microcosms, although the clinical significance of such a change has not been established. The impact of BKC exposure on the dissemination of resistant genes (notably efflux) remains speculative, although it manifests that clinical, veterinary and food isolates with elevated BKC MIC carried multiple efflux pump genes. The correlation between BKC usage and gene carriage, maintenance and dissemination has also not been established. The lack of clinical interpretation and significance in these studies does not allow to establish with certainty the role of BKC on AMR in practice. The limited literature and BZT and CHO do not allow to conclude that these will impact negatively on emerging bacterial resistance in practice.

Efflux-mediated tolerance to cationic biocides, a cause for concern?

AbstractWith an increase in the number of isolates resistant to multiple antibiotics, infection control has become increasingly important to help combat the spread of multi-drug-resistant pathogens. An important component of this is through the use of disinfectants and antiseptics (biocides). Antibiotic resistance has been well studied in bacteria, but little is known about potential biocide resistance genes and there have been few reported outbreaks in hospitals resulting from a breakdown in biocide effectiveness. Development of increased tolerance to biocides has been thought to be more difficult due to the mode of action of biocides which affect multiple cellular targets compared with antibiotics. Very few genes which contribute towards increased biocide tolerance have been identified. However, the majority of those that have are components or regulators of different efflux pumps or genes which modulate membrane function/modification. This review will examine the role of efflux in increased tolerance towards biocides, focusing on cationic biocides and heavy metals against Gram-negative bacteria. As many efflux pumps which are upregulated by biocide presence also contribute towards an antimicrobial resistance phenotype, the role of these efflux pumps in cross-resistance to both other biocides and antibiotics will be explored.

Biocides used as material preservatives modify rates of de novo mutation and horizontal gene transfer in bacteria

Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution and transmission of AMR. Previous studies showed that de-novo mutagenesis and horizontal gene transfer (HGT) by conjugation or transformation - important processes underlying resistance evolution and spread - are affected by antibiotics, metals and pesticides. However, natural microbial communities are also frequently exposed to biocides used as material preservatives, but it is unknown if these substances induce mutagenesis and HGT. Here, we show that active substances used in material preservatives can increase rates of mutation and conjugation in a species- and substance-dependent manner, while rates of transformation are not increased. The bisbiguanide chlorhexidine digluconate, the quaternary ammonium compound didecyldimethylammonium chloride, the metal copper, the pyrethroid-insecticide permethrin, and the azole-fungicide propiconazole increase mutation rates in Escherichia coli, whereas no increases were identified for Bacillus subtilis and Acinetobacter baylyi. Benzalkonium chloride, chlorhexidine and permethrin increased conjugation in E. coli. Moreover, our results show a connection between the RpoS-mediated general stress and the RecA-linked SOS response with increased rates of mutation and conjugation, but not for all biocides. Taken together, our data show the importance of assessing the contribution of material preservatives on AMR evolution and spread.

Investigation into the Metabolism of Quaternary Ammonium Compound Disinfectants by Bacteria

Since the start of the COVID-19 pandemic, our reliance on disinfectants and sanitizers and the use thereof has grown. While this may protect human health, it may be selecting for antimicrobial-resistant microorganisms, including those that are not only capable of growth in the presence of disinfectants but also thrive using this as an energy source. Furthermore, there is a growing concern in emerging nosocomial pathogens, which have shown resistance to antibiotics and disinfectants. This rise in resistance has led to the investigation of various mechanisms behind resistance, such as biofilms, efflux pumps, and mobile genetic elements. Although many resistance mechanisms have been identified, it was discovered that some potentially pathogenic microbes could metabolize these compounds, which remains an avenue for further investigation. Investigating alternative metabolic pathways in microorganisms capable of growth using disinfectants as their sole carbon and energy source may provide insight into the metabolism of quaternary ammonium compound (QAC)-based antimicrobials. Many of the metabolic reactions proposed include hydroxylation, N-dealkylation, N-demethylation, and β-oxidation of QACs. If clear metabolic pathways and reactions are elucidated, possible alternative approaches to QACs may be advised. Alternatively, this may provide opportunities for biodegradation of the compounds that adversely affect the environment.

Effect of cetyltrimethylammonium chloride on various Escherichia coli strains and their inactivation kinetics by ozone and monochloramine

Cethyltrimethylammonium chloride (CTMA) is one of the most used quaternary ammonium compounds (QACs) in consumer products. CTMA and other QACs are only partially eliminated in municipal wastewater treatment and they can interact with bacteria in biological processes. Currently, there is only limited information on the antimicrobial efficiency of CTMA in matrices other than standard growth media and if and how CTMA influences conventional chemical disinfection. The results obtained in this study showed that the susceptibility of E. coli to CTMA was significantly enhanced in phosphate-buffered saline, lake water and wastewater compared to broth. In broth, a minimum inhibitory concentration (MIC) of CTMA of 20 mgL^-1 was observed for E. coli, whereas a 4-log inactivation occurred for CTMA concentrations of about 4 mgL^-1 in buffered ultra-purified water, a lake water and wastewater effluent. The impacts of the pre-exposure and the presence of CTMA on inactivation by ozone and monochloramine were tested with three different E. coli strains: AG100 with the efflux pump acrAB intact, AG100A with it deleted and AG100tet with it overexpressed. Pre-exposure of E. coli AG100 to CTMA led to an increased susceptibility for ozone with second-order inactivation rate constants (∼ 10⁶ M^-1s^-1) increasing by a factor of about 1.5. An opposite trend was observed for monochloramine with second-order inactivation rate constants (∼ 10³ M^-1s^-1) decreasing by a factor of about 2. For E. coli AG100tet, the second-order inactivation rate constant decreased by a factor of almost 2 and increased by a factor of about 1.5 for ozone and monochloramine, respectively, relative to the strain AG100. The simultaneous presence of CTMA and ozone enhanced the second-order inactivation rate constants for CTMA concentrations of 2.5 mgL^-1 by a factor of about 3. For monochloramine also an enhancement of the inactivation was observed, which was at least additive but might also be synergistic. Enhancement by factors from about 2 to 4.5 were observed for CTMA concentrations > 2.5 mgL^-1.

Persistence against benzalkonium chloride promotes rapid evolution of tolerance during periodic disinfection

Biocides used as disinfectants are important to prevent the transmission of pathogens, especially during the current antibiotic resistance crisis. This crisis is exacerbated by phenotypically tolerant persister subpopulations that can survive transient antibiotic treatment and facilitate resistance evolution. Here, we show that E. coli displays persistence against a widely used disinfectant, benzalkonium chloride (BAC). Periodic, persister-mediated failure of disinfection rapidly selects for BAC tolerance, which is associated with reduced cell surface charge and mutations in the lpxM locus, encoding an enzyme for lipid A biosynthesis. Moreover, the fitness cost incurred by BAC tolerance turns into a fitness benefit in the presence of antibiotics, suggesting a selective advantage of BAC-tolerant mutants in antibiotic environments. Our findings highlight the links between persistence to disinfectants and resistance evolution to antimicrobials.

Ciprofloxacin induced antibiotic resistance in Salmonella Typhimurium mutants and genome analysis

Antibiotic resistance of Salmonella species is well reported. Ciprofloxacin is the frontline antibiotic for salmonellosis. The repeated exposure to ciprofloxacin leads to resistant strains. After 20 cycles of antibiotic exposure, resistant bacterial clones were evaluated. The colony size of the mutants was small and had an extended lag phase compared to parent strain. The whole genome sequencing showed 40,513 mutations across the genome. Small percentage (5.2%) of mutations was non-synonymous. Four-fold more transitions were observed than transversions. Ratio of < 1 transition vs transversion showed a positive selection for antibiotic resistant trait. Mutation distribution across the genome was uniform. The native plasmid was an exception and 2 mutations were observed on 90 kb plasmid. The important genes like dnaE, gyrA, iroC, metH and rpoB involved in antibiotic resistance had point mutations. The genome analysis revealed most of the metabolic pathways were affected.

Lactic acid bacteria biofilms and their ability to mitigate Escherichia coli O157:H7 surface colonization

Lactic acid bacteria (LAB) exert antagonistic activities against diverse microorganisms, including pathogens. In this work, we aimed to investigate the ability of LAB strains isolated from food to produce biofilms and to inhibit growth and surface colonization of Enterohaemorrhagic Escherichia coli (EHEC) O157:H7 at 10°C. The ability of 100 isolated LAB to inhibit EHEC O157:H7 NCTC12900 growth was evaluated in agar diffusion assays. Thirty-seven LAB strains showed strong growth inhibitory effect on EHEC. The highest inhibitory activities corresponded to LAB strains belonging to Lactiplantibacillus plantarum, Pediococcus acidilactici and Pediococcus pentosaceus species. Eighteen out of the 37 strains that showed growth inhibitory effects on EHEC also had the ability to form biofilms on polystyrene surfaces at 10°C and 30°C. Pre-established biofilms on polystyrene of four of these LAB strains were able to reduce significantly surface colonization by EHEC at low temperature (10°C). Among these four strains, Lact. plantarum CRL 1075 not only inhibited EHEC but also was able to grow in the presence of the enteric pathogen. Therefore, this strain proved to be a good candidate for further technological studies oriented to its application in food-processing environments to mitigate undesirable surface contaminations of E. coli.

Evaluation of the impact of adaptation of Klebsiella pneumoniae clinical isolates to benzalkonium chloride on biofilm formation

Background

The percentage of the multidrug resistant Klebsiella pneumoniae clinical isolates is increasing worldwide. The excessive exposure of K. pneumoniae isolates to sublethal concentrations of biocides like benzalkonium chloride (BAC) in health care settings and communities could be one of the causes contributing in the global spread of antibiotic resistance.

Results

We collected 50 K. pneumoniae isolates and these isolates were daily exposed to gradually increasing sublethal concentrations of BAC. The consequence of adaptation to BAC on the cell surface hydrophobicity (CSH) and biofilm formation of K. pneumoniae isolates was explored. Remarkably, 16% of the tested isolates showed an increase in the cell surface hydrophobicity and 26% displayed an enhanced biofilm formation. To evaluate whether the influence of BAC adaptation on the biofilm formation was demonstrated at the transcriptional level, the RT-PCR was employed. Noteworthy, we found that 60% of the tested isolates exhibited an overexpression of the biofilm gene (bssS). After sequencing of this gene in K. pneumoniae isolates before and after BAC adaptation and performing pairwise alignment, 100% identity was detected; a finding that means the absence of mutation after adaptation to BAC.

Conclusion

This study suggests that the widespread and increased use of biocides like BAC at sublethal concentrations has led to an increase biofilm formation by K. pneumoniae isolates. Enhanced biofilm formation could result in treatment failure of the infections generated by this pathogen.

Coagulase negative staphylococci from ovine bulk-tank milk: Effects of the exposure to sub-inhibitory concentrations of disinfectants for teat-dipping

Teat-dipping is one of the most effective methods to prevent mammary infections in ruminants, including sub-clinical mastitis caused by coagulase-negative staphylococci (CoNS). Improper disinfectant application could expose microorganisms to sub-inhibitory concentrations leading to phenotypic variations. In this study, 12 chlorhexidine-digluconate (CHDG)-tolerant (of which 4 qac positive) and 12 benzalkonium chloride (BC)-tolerant (of which 7 qac-positive) CoNS isolates from ovine milk were exposed to sub-inhibitory concentrations of CHDG and BC, respectively. Changes in disinfectant susceptibility against BC and CHDG, antibiotic resistance against 12 antibiotics and biofilm production were then assessed for both groups. After CHDG stress, 67 % and 83 % of the CHDG-stressed isolates doubled their MICs for BC and CHDG, respectively and 2 qac-negative isolates showed a four-fold increase of their MBCs for CHDG. After BC stress, MICs for BC and CHDG doubled in 58 % and 83 % of the BC-stressed isolates, respectively, while one qac-positive isolate increased four-fold the MIC for BC. Cross-resistance to antibiotics was assessed by disc diffusion method. Some qac-positive isolates varied their resistance profile, while a blaZ-positive isolate showed a resistant phenotype against ampicillin only after the exposure to the disinfectant. As for qac-positive isolates, one CHDG-stressed and 2 BC-stressed increased their resistance to kanamycin and cefoxitin, respectively. The Congo Red Agar test was carried out to assess the in vitro slime production: all isolates were negative after stress. In conclusion, sub-inhibitory exposure to disinfectants may affect disinfectant and antibiotic susceptibility, the latter in particular for qac-positive isolates and those hosting unexpressed antibiotic resistance genes.

Comparison of Gene Expression Profiles of Uropathogenic Escherichia Coli CFT073 after Prolonged Exposure to Subinhibitory Concentrations of Different Biocides

Biocides are chemical compounds widely used for sterilization and disinfection. The aim of this study was to examine whether exposure to subinhibitory biocide concentrations influenced transcriptional expression of genes that could improve a pathogen’s drug resistance or fitness. We used DNA microarrays to investigate the transcriptome of the uropathogenic Escherichia coli strain CFT073 in response to prolonged exposure to subinhibitory concentrations of four biocides: benzalkonium chloride, chlorhexidine, hydrogen peroxide and triclosan. Transcription of a gene involved in polymyxin resistance, arnT, was increased after treatment with benzalkonium chloride. However, pretreatment of the bacteria with this biocide did not result in cross-resistance to polymyxin in vitro. Genes encoding products related to transport formed the functional group that was most affected by biocides, as 110 out of 884 genes in this category displayed altered transcription. Transcripts of genes involved in cysteine uptake, sulfate assimilation, dipeptide transport, as well as cryptic phage genes were also more abundant in response to several biocides. Additionally, we identified groups of genes with transcription changes unique to single biocides that might include potential targets for the biocides. The biocides did not increase the resistance potential of the pathogen to other antimicrobials.

Identification of common highly expressed genes of Salmonella Enteritidis by in silico prediction of gene expression and in vitro transcriptomic analysis

Chickens are the reservoir host of Salmonella Enteritidis. Salmonella Enteritidis colonizes the gastro-intestinal tract of chickens and replicates within macrophages without causing clinically discernable illness. Persistence of S. Enteritidis in the hostile environments of intestinal tract and macrophages allows it to disseminate extra-intestinally to liver, spleen, and reproductive tract. Extra-intestinal dissemination into reproductive tract leads to contamination of internal contents of eggs, which is a major risk factor for human infection. Understanding the genes that contribute to S. Enteritidis persistence in the chicken host is central to elucidate the genetic basis of the unique pathobiology of this public health pathogen. The aim of this study was to identify a succinct set of genes associated with infection-relevant in vitro environments to provide a rational foundation for subsequent biologically-relevant research. We used in silico prediction of gene expression and RNA-seq technology to identify a core set of 73 S. Enteritidis genes that are consistently highly expressed in multiple S. Enteritidis strains cultured at avian physiologic temperature under conditions that represent intestinal and intracellular environments. These common highly expressed (CHX) genes encode proteins involved in bacterial metabolism, protein synthesis, cell-envelope biogenesis, stress response, and a few proteins with uncharacterized functions. Further studies are needed to dissect the contribution of these CHX genes to the pathobiology of S. Enteritidis in the avian host. Several of the CHX genes could serve as promising targets for studies towards the development of immunoprophylactic and novel therapeutic strategies to prevent colonization of chickens and their environment with S. Enteritidis.

Adaptation of Pseudomonas aeruginosa clinical isolates to benzalkonium chloride retards its growth and enhances biofilm production

The increasing percentage of Pseudomonas aeruginosa strains that are resistant to multiple antibiotics is a global problem. The exposure of P. aeruginosa isolates to repeated sub lethal concentrations of biocides in hospitals and communities may be one of the causes leading to increased antibiotic resistance. Benzalkonium chloride (BAC) is widely used as disinfectant and preservative. This study investigated the effect of exposure of P. aeruginosa clinical isolates to sub lethal concentrations of BAC on their antibiotic resistance, growth process and biofilm formation. The collected 43 P. aeruginosa clinical isolates were daily subjected to increasing sub lethal concentrations of BAC. The effect of adaptation on antibiotic resistance, growth process, cell surface hydrophobicity and biofilm formation of P. aeruginosa isolates were examined. Interestingly, Most P. aeruginosa isolates adapted to BAC showed an increase in antibiotic resistance and 66% of the isolates showed retardation of growth, 63% showed increased cell surface hydrophobicity and 23.5% exhibited enhanced biofilm formation by crystal violet assay. To define whether the effect of BAC adaptation on biofilm production was manifested at the transcriptional level, quantitative RT-PCR was used. We found that 60% of the tested isolates showed overexpression of ndvB biofilm gene. More efforts are required to diminish the increasing use of BAC to avoid bacterial adaptation to this biocide with subsequent retardation of growth and enhanced biofilm formation which could lead to antibiotic resistance and treatment failure of infections caused by this opportunistic pathogen.

Loss of Function in Escherichia coli Exposed to Environmentally Relevant Concentrations of Benzalkonium Chloride

Assessing the risk of resistance associated with biocide exposure commonly involves exposing microorganisms to biocides at concentrations close to the MIC. With the aim of representing exposure to environmental biocide residues, Escherichia coli MG1655 was grown for 20 passages in the presence or absence of benzalkonium chloride (BAC) at 100 ng/liter and 1,000 ng/liter (0.0002% and 0.002% of the MIC, respectively). BAC susceptibility, planktonic growth rates, motility, and biofilm formation were assessed, and differentially expressed genes were determined via transcriptome sequencing. Planktonic growth rate and biofilm formation were significantly reduced (P < 0.001) following BAC adaptation, while BAC minimum bactericidal concentration increased 2-fold. Transcriptomic analysis identified 289 upregulated and 391 downregulated genes after long-term BAC adaptation compared with the respective control organism passaged in BAC-free medium. When the BAC-adapted bacterium was grown in BAC-free medium, 1,052 genes were upregulated and 753 were downregulated. Repeated passage solely in biocide-free medium resulted in 460 upregulated and 476 downregulated genes compared with unexposed bacteria. Long-term exposure to environmentally relevant BAC concentrations increased the expression of genes associated with efflux and reduced the expression of genes associated with outer-membrane porins, motility, and chemotaxis. This was manifested phenotypically through the loss of function (motility). Repeated passage in a BAC-free environment resulted in the upregulation of multiple respiration-associated genes, which was reflected by increased growth rate. In summary, repeated exposure of E. coli to BAC residues resulted in significant alterations in global gene expression that were associated with minor decreases in biocide susceptibility, reductions in growth rate and biofilm formation, and loss of motility.IMPORTANCE Exposure to very low concentrations of biocides in the environment is a poorly understood risk factor for antimicrobial resistance. Repeated exposure to trace levels of the biocide benzalkonium chloride (BAC) resulted in loss of function (motility) and a general reduction in bacterial fitness but relatively minor decreases in susceptibility. These changes were accompanied by widespread changes in the Escherichia coli transcriptome. These results demonstrate the importance of including phenotypic characterization in studies designed to assess the risks of biocide exposure.

Exposure to Sublethal Concentrations of Benzalkonium Chloride Induces Antimicrobial Resistance and Cellular Changes in Klebsiellae pneumoniae Clinical Isolates

Benzalkonium chloride (BAC) is widely used as a disinfectant and preservative. This study investigated the effect on antimicrobial susceptibility and the cellular changes that occurred after exposure of Klebsiella pneumoniae clinical isolates to sublethal concentrations of BAC. Minimum inhibitory concentration and minimum bactericidal concentration of BAC were determined for the collected 50 K. pneumoniae clinical isolates by broth microdilution method, and the tested isolates were adapted to increasing sublethal concentrations of BAC. The effect of adaptation on MICs of the tested 16 antimicrobial agents, the cell ultrastructure, efflux, and membrane depolarization of the tested isolates were examined. Interestingly, most K. pneumoniae isolates that adapted to BAC showed increased antimicrobial resistance, various morphological and structural changes, increased membrane depolarization, and enhanced efflux activity. The findings of this study suggest that the extensive use of BAC at sublethal concentrations could contribute to the emergence of antibiotic resistance in K. pneumoniae clinical isolates that might complicate the therapy of infections caused by this pathogen. In conclusion, the hazard associated with the prolonged exposure to sublethal concentrations of BAC represents a public health risk and therefore it should be a focus in both hospital and community sanitation practices.

Impacts of quaternary ammonium compounds on membrane bioreactor performance: Acute and chronic responses of microorganisms

Quaternary ammonium compounds (QACs) are emerging contaminants with the extensive applications in a variety of fields. However, little is known about their potential impacts on activated sludge and performance of biological wastewater treatment processes. In this work, the effects of benzalkonium chloride (BAC, a kind of QACs) on acute and chronic responses of microorganisms and on MBR performance were systematically investigated. The results showed that a low concentration (0.5-2.0 mg BAC/g SS) caused no significant effects on activated sludge property. In contrast, an elevated concentration of BAC led to severer inhibition on activated sludge and key enzyme activity (e.g., dehydrogenase activity) in both short-term and long-term exposure, thus deteriorating the pollutant removal efficiency. Compared with the control MBR (R1) and the reactor with 0.5 mg/L BAC (R2), the removal efficiency of ammonia in R3 with 5.0 mg/L BAC at identical hydraulic retention time (4.3 h) and sludge retention time (30 d) was decreased, i.e., ammonium removal efficiency in R1∼R3 was 95.4 ± 6.1, 93.4 ± 8.1 and 89.3 ± 17.6%, respectively. Moreover, MBR tests showed that membrane fouling was aggravated in the presence of high-concentration BAC. Long-term exposure to BAC reduced microbial community diversity and enriched the BAC-resistant microbes. For instance, the abundance of Pseudomonas genus in R3 was increased from 0.02% to 14.9% with the increase of operation time. Microbial community structure was changed to resist the environmental stress induced by BAC during long-term exposure, thus decreasing the inhibition effects.

Drug resistance of oral bacteria to new antibacterial dental monomer dimethylaminohexadecyl methacrylate

Only two reports exist on drug-resistance of quaternary ammonium monomers against oral bacteria; both studies tested planktonic bacteria for 10 passages, and neither study tested biofilms or resins. The objectives of this study were to investigate the drug-resistance of Streptococcus mutans, Streptococcus sanguinis and Streptococcus gordonii against dimethylaminohexadecyl methacrylate (DMAHDM), and to evaluate biofilms on resins with repeated exposures for 20 passages for the first time. DMAHDM, dimethylaminododecyl methacrylate (DMADDM) and chlorhexidine (CHX) were tested with planktonic bacteria. Biofilms were grown on a resin containing 3% DMAHDM. Minimum-inhibitory concentrations were measured. To detect drug-resistance, the survived bacteria from the previous passage were used as inoculum for the next passage for repeated exposures. S. gordonii developed drug-resistance against DMADDM and CHX, but not against DMAHDM. Biofilm colony-forming units (CFU) on DMAHDM-resin was reduced by 3–4 log; there was no difference from passages 1 to 20 (p > 0.1). No drug-resistance to DMAHDM was detected for all three bacterial species. In conclusion, this study showed that DMAHDM induced no drug-resistance, and DMAHDM-resin reduced biofilm CFU by 3–4 log, with no significant change from 1 to 20 passages. DMAHDM with potent antibacterial activities and no drug-resistance is promising for dental applications.

Exploring the Antimicrobial Action of Quaternary Amines against Acinetobacter baumannii

Quaternary amine compounds (QAC) are potent antimicrobials used to prevent the spread of pathogenic bacteria. While they are known for their membrane-damaging properties, QAC action has been suggested to extend beyond the surface to intracellular targets. Here we characterize the range of action of the QAC biocide benzalkonium chloride (BZK) against the bacterial pathogen Acinetobacter baumannii At high concentrations, BZK acts through membrane disruption, but at low concentrations we show that wide-spread protein aggregation is associated with BZK-induced cell death. Resistance to BZK is found to develop through ribosomal protein mutations that protect A. baumannii against BZK-induced protein aggregation. The multifunctional impact of BZK led us to discover that alternative QAC structures, with low human toxicity, retain potent action against multidrug-resistant A. baumannii, Staphylococcus aureus, and Clostridium difficile and present opportunities for their development as antibiotics.IMPORTANCE Quaternary amine compounds (QACs) are widely used to prevent the spread of bacterial pathogens, but our understanding of their mode of action is incomplete. Here we describe disruption of bacterial proteostasis as an unrecognized action of QAC antimicrobial action and uncover the potential of diverse QAC structures to act as multitarget antibiotics.

Tolerance development in Listeria monocytogenes-Escherichia coli dual-species biofilms after sublethal exposures to pronase-benzalkonium chloride combined treatments

This study was designed to assess the effects that sublethal exposures to pronase (PRN) and benzalkonium chloride (BAC) combined treatments have on Listeria monocytogenes-Escherichia coli dual-species biofilms grown on stainless steel in terms of tolerance development (TD) to these compounds. Additionally, fluorescence microscopy was used to observe the changes of the biofilm structure. PRN-BAC exposure was carried out using three different approaches and TD was evaluated treating biofilms with a final 100 μg/ml PRN followed by 50 μg/ml BAC combined treatment. Results showed that exposure to PRN-BAC significantly decreased the number of adhered L. monocytogenes (P < 0.05), while E. coli counts remained generally unaltered. It was also demonstrated that the incorporation of recovery periods during sublethal exposures increased the tolerance of both species of the mixed biofilm to the final PRN-BAC treatment. Moreover, control biofilms became more resistant to PRN-BAC if longer incubation periods were used. Regardless of the treatment used, log reduction values were generally lower in L. monocytogenes compared to E. coli. Additionally, microscopy images showed an altered morphology produced by sublethal PRN-BAC in exposed L. monocytogenes-E. coli dual-species biofilms compared to control samples. Results also demonstrated that L. monocytogenes-E. coli dual-species biofilms are able to develop tolerance to PRN-BAC combined treatments depending on way they have been previously exposed. Moreover, they suggest that the generation of bacterial tolerance should be included as a parameter for sanitation procedures design.

The use of minimum selectable concentrations (MSCs) for determining the selection of antimicrobial resistant bacteria

The use of antimicrobial compounds is indispensable in many industries, especially drinking water production, to eradicate microorganisms. However, bacterial growth is not unusual in the presence of disinfectant concentrations that would be typically lethal, as bacterial populations can develop resistance. The common metric of population resistance has been based on the Minimum Inhibitory Concentration (MIC), which is based on bacteria lethality. However, sub-lethal concentrations may also select for resistant bacteria due to the differences in bacterial growth rates. This study determined the Minimal Selective Concentrations (MSCs) of bacterial populations exposed to free chlorine and monochloramine, representing a metric that possibly better reflects the selective pressures occurring at lower disinfectant levels than MIC. Pairs of phylogenetically similar bacteria were challenged to a range of concentrations of disinfectants. The MSCs of free chlorine and monochloramine were found to range between 0.021 and 0.39 mg L^-1, which were concentrations 1/250 to 1/5 than the MICs of susceptible bacteria (MIC _susc ). This study indicates that sub-lethal concentrations of disinfectants could result in the selection of resistant bacterial populations, and MSCs would be a more sensitive indicator of selective pressure, especially in environmental systems.

Occurrence of Extended-Spectrum β-Lactamases, Plasmid-Mediated Quinolone Resistance, and Disinfectant Resistance Genes in Escherichia coli Isolated from Ready-To-Eat Meat Products

There are growing concerns about the coselection of resistance against antibiotics and disinfectants in bacterial pathogens. The aim of this study was to characterize the antimicrobial susceptibility profiles, the prevalence of extended-spectrum β-lactamases (ESBLs), plasmid-mediated quinolone resistance genes (PMQRs), and quaternary ammonium compound resistance genes (QACs) in Escherichia coli isolated from ready-to-eat (RTE) meat products obtained in Guangzhou, China, and to determine whether these genes were colocalized in the isolates. A total of 64 E. coli isolates were obtained from 720 RTE meat samples. Multidrug resistance was observed in 70.3% of the isolates. A 100% of the isolates were resistant to benzalkonium chloride. Four types of β-lactamase genes were identified in the 16 ESBL-producing E. coli isolates: bla_SHV (9.4%), bla_TEM (7.8%), bla_CTX-M-15 (1.6%), and bla_CTX-M-9 (1.6%). PMQRs were present in nine isolates (14.1%), with aac(6')-Ib-cr and qnrD detected in eight (12.5%) and one isolate (1.6%), respectively. The QACs ydgE/ydgF were most commonly present (60.9%), while qacF, mdfA, sugE(p), emrE, qacG, sugE(c), and qacE were less prevalent (1.6%-18.8%). Coexistence of ESBLs and/or PMQRs with QACs was found in 21 isolates (32.8%). The aac(6')-Ib-cr and bla_CTX-M-15 genes were found to be cotransferred with qacF in one isolate. The data obtained in this study indicate that ESBLs and/or PMQRs with QACs can not only be colocalized but can also be cotransferred in E. coli isolates from RTE meat products. The E. coli isolates with multiple antimicrobial resistance genes may transmit to humans through food chain and thus require further investigation and increased awareness.

Effects of exposure to quaternary-ammonium-based biocides on antimicrobial susceptibility and tolerance to physical stresses in bacteria from organic foods

In the present study, a collection of 76 biocide-sensitive bacterial strains isolated from organically produced food were adapted by repeated exposure to increasing concentrations of the quaternary ammonium compounds (QACs) benzalkonium chloride (BC) and hexadecylpyridinium chloride (HDP). The sensitivity of both wildtype strains and their corresponding QAC-adapted strains to other biocides and to antibiotics was studied. QAC tolerance increased in 88.2% of strains for BC and in 30.3% of strains for HDP, with increases in minimum inhibitory concentrations between 2 and over 100 fold. Adaptive resistance was stable after 20 subcultures in biocide-free medium for 7 and 5 of the BC- and HDP-adapted strains, respectively. Adaptation to BC and HDP also reduced the susceptibility to other biocides, mainly hexachlorophene (CF), didecyldimethylammonium bromide (AB), triclosan (TC) and chlorhexidine (CH). BC-adapted strains showed increased antibiotic resistance to ampicillin (AM) followed by sulfamethoxazol (SXT) and cefotaxime (CTX), and some showed increased sensitivity to ceftazidime (CAZ), CTX, AM and STX. Changes in antibiotic resistance in HDP-adapted strains were more heterogeneous and strain-dependent. Main efflux pump genes detected in QAC-adapted strains were acrB, sugE, norC, qacE and qacH, as well as antibiotic resistance genes aac(6_)-Ie-aph(2_)-Ia, aph(2_)-Ic, ant(4_)-Ia, lsa, mrsA/B, ereA, ermB and cat. Membrane anisotropy experiments revealed that QAC adaptation induced an increase in membrane rigidity in the case of BC, while response to HDP was more heterogeneous and strain-dependent. Growth capacity was significantly higher in some QAC-adapted strains and strain-dependent changes in heat tolerance were also detected in QAC-adapted strains. Gastric acid or bile resistances do not seem to be influenced by QAC adaptation.

Hydrosol of Thymbra capitata Is a Highly Efficient Biocide against Salmonella enterica Serovar Typhimurium Biofilms

Salmonella is recognized as one of the most significant enteric foodborne bacterial pathogens. In recent years, the resistance of pathogens to biocides and other environmental stresses, especially when they are embedded in biofilm structures, has led to the search for and development of novel antimicrobial strategies capable of displaying both high efficiency and safety. In this direction, the aims of the present work were to evaluate the antimicrobial activity of hydrosol of the Mediterranean spice Thymbra capitata against both planktonic and biofilm cells of Salmonella enterica serovar Typhimurium and to compare its action with that of benzalkonium chloride (BC), a commonly used industrial biocide. In order to achieve this, the disinfectant activity following 6-min treatments was comparatively evaluated for both disinfectants by calculating the concentrations needed to achieve the same log reductions against both types of cells. Their bactericidal effect against biofilm cells was also comparatively determined by in situ and real-time visualization of cell inactivation through the use of time-lapse confocal laser scanning microscopy (CLSM). Interestingly, results revealed that hydrosol was almost equally effective against biofilms and planktonic cells, whereas a 200-times-higher concentration of BC was needed to achieve the same effect against biofilm compared to planktonic cells. Similarly, time-lapse CLSM revealed the significant advantage of the hydrosol to easily penetrate within the biofilm structure and quickly kill the cells, despite the three-dimensional (3D) structure of Salmonella biofilm.

IMPORTANCE

The results of this paper highlight the significant antimicrobial action of a natural compound, hydrosol of Thymbra capitata, against both planktonic and biofilm cells of a common foodborne pathogen. Hydrosol has numerous advantages as a disinfectant of food-contact surfaces. It is an aqueous solution which can easily be rinsed out from surfaces, it does not have the strong smell of the essential oil (EO) and it is a byproduct of the EO distillation procedure without any industrial application until now. Consequently, hydrosol obviously could be of great value to combat biofilms and thus to improve product safety not only for the food industries but probably also for many other industries which experience biofilm-related problems.

Similar Microbial Consortia and Genes Are Involved in the Biodegradation of Benzalkonium Chlorides in Different Environments

Benzalkonium chlorides (BACs) are emerging pollutants. Identification of microorganisms and the genes involved in the biodegradation of BACs is crucial for better understanding the fate of BACs in the environment and developing treatment strategies. Four microbial communities degrading BACs were developed from sewage (SEW), activated sludge (AS), soil (SOIL) and sea sediment (SEA) samples. According to 16S rRNA pyrosequencing and shotgun metagenome sequencing analyses, the most abundant species represented uncharacterized members of the Pseudomonas and Achromobacter genera. BAC biotransformation rates of the enriched microbial communities were 2.8, 3.2, 17.8, and 24.3 μM hr(-1) for SEA, AS, SOIL, and SEW, respectively, and were positively correlated with the relative abundance of a particular Pseudomonas sp. strain, BIOMIG1. The strain BIOMIG1 mineralizes BACs at a rate up to 2.40 μmol hr(-1) 10(-11) cells. Genomes of four BAC degrading and nondegrading BIOMIG1 phenotypes were sequenced and differentially compared with each other. As a result, a gene cluster encoding for transporters, an integrase and a dioxygenase were involved in BAC biotransformation. Our results suggest that BIOMIG1 plays a key role on the fate of BACs in the environment and genes, other than those reported to date, are involved in BAC biotransformation in various habitats.

Polymorphic variation in susceptibility and metabolism of triclosan-resistant mutants of Escherichia coli and Klebsiella pneumoniae clinical strains obtained after exposure to biocides and antibiotics

Exposure to biocides may result in cross-resistance to other antimicrobials. Changes in biocide and antibiotic susceptibilities, metabolism, and fitness costs were studied here in biocide-selected Escherichia coli and Klebsiella pneumoniae mutants. E. coli and K. pneumoniae mutants with various degrees of triclosan susceptibility were obtained after exposure to triclosan (TRI), benzalkonium chloride (BKC), chlorhexidine (CHX) or sodium hypochlorite (SHC), and ampicillin or ciprofloxacin. Alterations in antimicrobial susceptibility and metabolism in mutants were tested using Phenotype MicroArrays. The expression of AcrAB pump and global regulators (SoxR, MarA, and RamA) was measured by quantitative reverse transcription-PCR (qRT-PCR), and the central part of the fabI gene was sequenced. The fitness costs of resistance were assessed by a comparison of relative growth rates. Triclosan-resistant (TRI(r)) and triclosan-hypersusceptible (TRI(hs)) mutants of E. coli and K. pneumoniae were obtained after selection with biocides and/or antibiotics. E. coli TRI(r) mutants, including those with mutations in the fabI gene or in the expression of acrB, acrF, and marA, exhibited changes in susceptibility to TRI, CHX, and antibiotics. TRI(r) mutants for which the TRI MIC was high presented improved metabolism of carboxylic acids, amino acids, and carbohydrates. In TRI(r) mutants, resistance to one antimicrobial provoked hypersusceptibility to another one(s). TRI(r) mutants had fitness costs, particularly marA-overexpressing (E. coli) or ramA-overexpressing (K. pneumoniae) mutants. TRI, BKC, and CIP exposure frequently yielded TRI(r) mutants exhibiting alterations in AraC-like global regulators (MarA, SoxR, and RamA), AcrAB-TolC, and/or FabI, and influencing antimicrobial susceptibility, fitness, and metabolism. These various phenotypes suggest a trade-off of different selective processes shaping the evolution toward antibiotic/biocide resistance and influencing other adaptive traits.

Effect of a novel quaternary ammonium methacrylate polymer (QAMP) on adhesion and antibacterial properties of dental adhesives

This study investigated the resin–dentin bond strength (μTBS), degree of conversion (DC), and antibacterial potential of an innovative adhesive system containing a quaternary ammonium methacrylate polymer (QAMP) using in situ and in vitro assays. Forty-two human third molars were flattened until the dentin was exposed and were randomly distributed into three groups of self-etching adhesive systems: Clearfil™ SE Bond containing 5% QAMP (experimental group), Clearfil™ Protect Bond (positive control) and Clearfil™ SE Bond (negative control). After light curing, three 1 mm-increments of composite resin were bonded to each dentin surface. A total of thirty of these bonded teeth (10 teeth per group) was sectioned to obtain stick-shaped specimens and tested under tensile stress immediately, and after 6 and 12 months of storage in distilled water. Twelve bonded teeth (4 teeth per group) were longitudinally sectioned in a mesio-to-distal direction to obtain resin-bonded dentin slabs. In situ DC was evaluated by micro-Raman spectroscopy. In vitro DC of thin films of each adhesive system was measured using Fourier transform infrared spectroscopy. In vitro susceptibility tests of these three adhesive systems were performed by the minimum inhibitory/minimum bactericidal concentration (MIC/MBC) assays against Streptococcus mutans, Lactobacillus casei, and Actinomyces naeslundii. No statistically significant difference in μTBS was observed between Clearfil™ SE Bond containing 5% QAMP and Clearfil™ SE Bond (p > 0.05) immediately, and after 6 and 12 months of water storage. However Clearfil™ Protect Bond showed a significant reduction of μTBS after 12 months of storage (p = 0.039). In addition, QAMP provided no significant change in DC after incorporating into Clearfil™ SE Bond (p > 0.05). Clearfil™ SE Bond containing 5% QAMP demonstrated MIC/MBC values similar to the positive control against L. casei and A. naeslundii and higher than the negative control for all evaluated bacterial strains. The use of QAMP in an adhesive system demonstrated effective bond strength, a suitable degree of conversion, and adequate antibacterial effects against oral bacteria, and may be useful as a new approach to provide long-lasting results for dental adhesives.

Attachment and biofilm formation by foodborne bacteria in meat processing environments: causes, implications, role of bacterial interactions and control by alternative novel methods

Attachment of potential spoilage and pathogenic bacteria to food contact surfaces and the subsequent biofilm formation represent serious challenges to the meat industry, since these may lead to cross-contamination of the products, resulting in lowered-shelf life and transmission of diseases. In meat processing environments, microorganisms are sometimes associated to surfaces in complex multispecies communities, while bacterial interactions have been shown to play a key role in cell attachment and detachment from biofilms, as well as in the resistance of biofilm community members against antimicrobial treatments. Disinfection of food contact surfaces in such environments is a challenging task, aggravated by the great antimicrobial resistance of biofilm associated bacteria. In recent years, several alternative novel methods, such as essential oils and bacteriophages, have been successfully tested as an alternative means for the disinfection of microbial-contaminated food contact surfaces. In this review, all these aspects of biofilm formation in meat processing environments are discussed from a microbial meat-quality and safety perspective.