Enhanced Photocatalytic Activity of WS2/TiO2 Nanofibers for Degradation of Phenol under Visible Light Irradiation

Effect of Doping TiO2 NPs with Lanthanides (La, Ce and Eu) on the Adsorption and Photodegradation of Cyanide-A Comparative Study

Free cyanide is a highly dangerous compound for health and the environment, so treatment of cyanide-contaminated water is extremely important. In the present study, TiO₂, La/TiO₂, Ce/TiO₂, and Eu/TiO₂ nanoparticles were synthesized to assess their ability to remove free cyanide from aqueous solutions. Nanoparticles synthesized through the sol-gel method were characterized by X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transformed infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), and specific surface area (SSA). Langmuir and Freundlich isotherm models were utilized to fit the adsorption equilibrium experimental data, and pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used to fit the adsorption kinetics experimental data. Cyanide photodegradation and the effect of reactive oxygen species (ROS) on the photocatalytic process were investigated under simulated solar light. Finally, reuse of the nanoparticles in five consecutive treatment cycles was determined. The results showed that La/TiO₂ has the highest percentage of cyanide removal (98%), followed by Ce/TiO₂ (92%), Eu/TiO₂ (90%), and TiO₂ (88%). From these results, it is suggested that La, Ce, and Eu dopants can improve the properties of TiO₂ as well as its ability to remove cyanide species from aqueous solutions.

Superior Photocatalytic Activity of BaO@Ag3PO4 Nanocomposite for Dual Function Degradation of Methylene Blue and Hydrogen Production under Visible Light Irradiation

The current work focuses on the photo degradation of organic pollutants, particularly methylene blue (MB) dye, and the production of hydrogen as green energy using a composite of silver phosphate Ag3PO4 (AP) and barium oxide/silver phosphate BaO@Ag3PO4 (APB) as a photocatalyst. This composite was successfully synthesized using a chemical co-precipitation approach. The physicochemical properties of the obtained samples were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet–visible diffuse reflectance spectroscopy (UV–Vis/DRS), and photoluminescence (PL) spectrophotometry. From XRD, the average crystallite sizes of AP and APB are 39.1 and 46 nm, respectively, with a homogeneous morphology detected by SEM. UV and PL experiments showed that the compound is active under visible light, with an improvement in the lifetimes of the electrons and the holes in the presence of BaO with Ag3PO4. The as-synthesized APB photocatalyst sample showed a remarkably high degradation efficiency of MB (20 ppm, 50 mL) of around 94%, with a hydrogen production yield of around 7538 μmol/(h·g), after 120 min of illumination, which is greater than the degradation efficiency of the AP photocatalyst sample, which was about 88%. The high photodegradation efficiency was attributed to the electronic promotion effect of the BaO particles. The APB composite demonstrated an increased photocatalytic performance in effectively degrading an organic dye (MB) with no secondary pollutants when exposed to visible light irradiation.

Fabrication of WS2/WSe2 Z-Scheme Nano-Heterostructure for Efficient Photocatalytic Hydrogen Production and Removal of Congo Red under Visible Light

In this study, a novel tungsten disulfide/tungsten diselenide (WS2/WSe2) heterojunction photocatalyst by a facile hydrothermal process with great capable photocatalytic efficiency for hydrogen evolution from water and organic compound removal was discussed. The WS2/WSe2 heterojunction photocatalyst to form heterojunctions to inhibit the quick recombination rate of photo-response holes and electrons is reflected to be a useful method to enhance the capability of photocatalysis hydrogen production. The hydrogen production rate of the WS2/WSe2 photocatalyst approach is 3856.7 μmol/g/h, which is 12 and 11 folds the efficiency of bare WS2 and WSe2, respectively. Moreover, the excellent photocatalytic performance for Congo Red (CR) removal (92.4%) was 2.4 and 2.1 times higher than those of bare WS2 and WSe2, respectively. The great photocatalytic efficiency was owing to the capable electrons and holes separation of WS2/WSe2 and the construction of Z-scheme heterostructure, which possessed vigorous photocatalytic oxidation and reduction potentials. The novel one-dimensional structure of WS2/WSe2 heterojunction shortens the transport pathway of photo-induced electrons and holes. This work provided an insight to the pathway of interfacial separation and transferring for induced charge carriers, which can refer to the interfacial engineering of developed nanocomposite photocatalysts. It possessed great capable photocatalytic efficiency of hydrogen production and organic dye removal. This study offers an insight to the route of interfacial migration and separation for induced charge carriers to generating clean hydrogen energy and solve environmental pollution issue.