Bioactivity and Cell Compatibility of β-Wollastonite Derived from Rice Husk Ash and Limestone

Investigating the in-vitro bioactivity, biodegradability and drug release behavior of the newly developed PES/HA/WS biocompatible nanocomposites as bone graft substitute

The nucleation of carbonate-containing apatite on the biomaterials surface is regarded as a significant stage in bone healing process. In this regard, composites contained hydroxyapatite (Ca10(PO4)6(OH)2, HA), wollastonite (CaSiO3, WS) and polyethersulfone (PES) were synthesized via a simple solvent casting technique. The in-vitro bioactivity of the prepared composite films with different weight ratios of HA and WS was studied by placing the samples in the simulated body fluid (SBF) for 21 days. The results indicated that the the surface of composites containing 2 wt% HA and 4 wt% WS was completely covered by a thick bone-like apatite layer, which was characterized by Grazing incidence X-ray diffraction, attenuated total reflectance-Fourier transform infrared spectrometer, field emission electron microscopy and energy dispersive X-ray analyzer (EDX). The degradation study of the samples showed that the concentration of inorganic particles could not influence the degradability of the polymeric matrix, where all samples expressed similar dexamethasone (DEX) release behavior. Moreover, the in-vitro cytotoxicity results indicated the significant cyto-compatibility of all specimens. Therefore, these findings revealed that the prepared composite films composed of PES, HA, WS and DEX could be regarded as promising bioactive candidates with low degradation rate for bone tissue engineering applications.

Synergistic effect of ion-releasing fillers on the remineralization and mechanical properties of resin-dentin bonding interfaces

In modern restorative dentistry, adhesive resin materials are vital for achieving minimally invasive, esthetic, and tooth-preserving restorations. However, exposed collagen fibers are found in the hybrid layer of the resin-dentin bonding interface due to incomplete resin penetration. As a result, the hybrid layer is susceptible to attack by internal and external factors such as hydrolysis and enzymatic degradation, and the durability of dentin bonding remains limited. Therefore, efforts have been made to improve the stability of the resin-dentin interface and achieve long-term clinical success. New ion-releasing adhesive resin materials are synthesized by introducing remineralizing ions such as calcium and phosphorus, which continuously release mineral ions into the bonding interface in resin-bonded restorations to achieve dentin biomimetic remineralization and improve bond durability. As an adhesive resin material capable of biomimetic mineralization, maintaining excellent bond strength and restoring the mechanical properties of demineralized dentin is the key to its function. This paper reviews whether ion-releasing dental adhesive materials can maintain the mechanical properties of the resin-dentin bonding interface by supplementing the various active ingredients required for dentin remineralization from three aspects: phosphate, silicate, and bioactive glass.

A Review on the Role of Wollastonite Biomaterial in Bone Tissue Engineering

Millions of people around the world have bone-tissue defects. Autologous and allogeneic bone grafting are frequent therapeutic techniques; however, none has produced the best therapeutic results. This has inspired researchers to investigate novel bone-regeneration technologies. In recent years, the development of bone tissue engineering (BTE) scaffolds has been at the forefront of this discipline. Due to their limitless supply and lack of disease transmission, engineered bone tissue has been advanced for the repair and reconstruction of bone deformities. Bone tissue is a highly vascularized, dynamic tissue that constantly remodels during an individual's lifetime. Bone tissue engineering is aimed at stimulating the creation of new, functional bone by combining biomaterials, cells, and factor treatment synergistically. This article provides a review of wollastonite's biomaterial application in bone tissue engineering. This work includes an explanation of wollastonite minerals including mining, raw materials for the synthesis of artificial wollastonite with various methods, its biocompatibility, and biomedical applications. Future perspectives are also addressed, along with topics like bone tissue engineering, the qualities optimal bone scaffolds must have, and the way a scaffold is designed can have a big impact on how the body reacts.

Study on Debinding and Sintering Processes for Ceramics Fabricated Using Digital Light Processing (DLP) 3D Printing

Ceramics have excellent properties such as hardness and thermal and chemical stability. Therefore, researchers have studied the use of 3D printing to produce complex shapes in tools and structural applications. The debinding and sintering processes for ceramic composite materials manufactured using digital light processing (DLP) 3D printing technology were studied. The slurry used for DLP 3D printing requires debinding and sintering, as it contains ceramics and binders. Therefore, the debinding and sintering processes were measured by TG-DSC curves, and the changes in material characteristics were evaluated by setting the debinding holding time (4, 5, and 6 h) and sintering temperature (1100, 1200, and 1300 °C) as parameters. After debinding for 6 h, the density of the ceramic sintered at 1300 °C was 1.36 g/cm2; the linear shrinkage was 22.1%/21.6%/28.5% along the x, y, and z axes, respectively; and the bending strength was 8.58 MPa. As a result of this study, we developed an optimized process for the debinding and sintering of ceramics manufactured through the DLP 3D printing process.

Adhesive Bioinspired Coating for Enhancing Glass-Ceramics Scaffolds Bioactivity

Bioceramic scaffolds, composed of a biphasic composite containing bioactive glass and hydroxyapatite, were prepared in this work to overcome the intrinsic limits of the two components taken separately (in particular, their specific reactivities and dissolution rates, which should be tunable as a function of the given clinical requirements). To mimic the biological environment and tune the different stages of cellular response, a coating with gelatin and chondroitin sulphate via Layer-by-Layer (LbL) assembly was presented and discussed. The resulting functionalized scaffolds were affected by the coating in terms of microstructure and porosity. In addition, the LbL coating significantly enhanced the seeded cell behaviour, with high adhesion, proliferation and osteogenic activity, as revealed by the alkaline phosphatase activity and overexpression of osteopontin and osteocalcin.

Evaluation of the Performance of Different Types of Fibrous Concretes Produced by Using Wollastonite

Production of cement and aggregate used in cement-based composites causes many environmental and energy problems. Decreasing the usage of cement and aggregate is a crucial and currently relevant challenge to provide sustainability. Inert materials can also be used instead of cement and aggregates, similar to pozzolanic materials, and they have positive effects on cement-based composites. One of the inert materials used in cement-based composites is wollastonite (calcium metasilicate-CaSiO₃), which has been investigated and attracted attention of many researchers. This article presents state-of-the-art research regarding fibrous concretes produced with wollastonite, such as mortars, conventional concrete, engineered cementitious composites, geopolymer concrete, self-compacting concrete, ultra-high-performance concrete and pavement concrete. The use of synthetic wollastonite, which is a novel issue, its high aspect ratio and allowing the use of waste material are also evaluated. Studies in the literature show that the use of wollastonite in different types of concrete improves performance properties, such as mechanical/durability properties, and provides environmental-economic efficiency. It has been proven by studies that wollastonite is a material with an inert structure, and, therefore, its behavior is similar to that of a fiber in cementitious composites due to its acicular particle structure.

Circular Economy: A Comprehensive Review of Eco-Friendly Wollastonite Applications

The growing increase in greenhouse gases, especially carbon dioxide (CO2), by anthropogenic activities can be linked to extreme climate events, such as intensive droughts, floods, or hurricanes, and has led to several studies focused on reducing the concentration of this greenhouse gas in the atmosphere. Some technologies, such as carbon capture and storage (CCS), can potentially sequester billions of tons of CO2 per year. One of the promising methods is the use of carbon mineralization as a CCS methodology. For this approach, some minerals can be investigated, such as wollastonite, which can be obtained from agricultural waste recovery. One topic of interest in these studies is agriculture, demonstrating that it can play an important role in climate change mitigation. This work presents a critical review of the studies of rice waste use for potential synthesizing wollastonite as a path for CO2 storage, promoting the circular economy. Several works were analyzed and presented, addressing eco-friendly wollastonite use, such as in the cement industry, and they can contribute to a lower global warming potential. There is a promising way to explore, once there are few studies in the literature about CO2 capture and storage of wollastonite by carbon mineralization.

Bioactivity and Biocompatibility Properties of Sustainable Wollastonite Bioceramics from Rice Husk Ash/Rice Straw Ash: A Review

Recently, there has been an increase in interest in agricultural waste in scientific, technological, environmental, economic, and social contexts. The processing of rice husk ash/rice straw ash into biocompatible products—also known as biomaterials—used in biomedical implants is a technique that can enhance the value of agricultural waste. This method has effectively converted unprocessed agricultural waste into high-value products. Rice husk and straw are considered to be unwanted agricultural waste and are largely discarded because they pollute the environment. Because of the related components present in bone and teeth, this waste can produce wollastonite. Wollastonite is an excellent material for bone healing and implants, as well as tissue regeneration. The use of rice husk ash or rice straw ash in wollastonite production reduces the impact of agricultural waste on pollution and prompts the ensuing conversion of waste into a highly beneficial invention. The use of this agricultural waste in the fabrication of wollastonite using rice husk ash or rice straw ash was investigated in this paper. Wollastonite made from rice husk ash and rice straw ash has a fair chance of lowering the cost of bone and tooth repair and replacement, while having no environmental effects.

Effects of Mullite, Maghemite, and Silver Nanoparticles Incorporated in β-Wollastonite on Tensile Strength, Magnetism, Bioactivity, and Antimicrobial Activity

β-wollastonite (βW) has sparked much interest in bone defect recovery and regeneration. Biomaterial-associated infections and reactions between implants with human cells have become a standard clinical concern. In this study, a green synthesized βW, synthesized from rice husk ash and a calcined limestone precursor, was incorporated with mullite, maghemite, and silver to produce β wollastonite composite (βWMAF) to enhance the tensile strength and antibacterial properties. The addition of mullite to the βWMAF increased the tensile strength compared to βW. In vitro bioactivity, antibacterial efficacy, and physicochemical properties of the β-wollastonite and βWMAF were characterized. βW and βWMAF samples formed apatite spherules when immersed in simulated body fluid (SBF) for 1 day. In conclusion, βWMAF, according to the tensile strength, bioactivity, and antibacterial activity, was observed in this research and appropriate for the reconstruction of cancellous bone defects.

Finite Element-Based Numerical Simulations to Evaluate the Influence of Wollastonite Microfibers on the Dynamic Compressive Behavior of Cementitious Composites

This paper investigates the dynamic compressive behavior of wollastonite fiber-reinforced cementitious mortars using multiscale numerical simulations. The rate dependent behavior of the multiphase heterogeneous systems is captured in a multiscale framework that implements continuum damage towards effective property prediction. The influence of wollastonite fiber content (% by mass) as cement replacement on the dynamic compressive strength and energy absorption capacity is thereafter elucidated. An average compressive strength gain of 40% is obtained for mortars with 10% wollastonite fiber content as cement replacement, as compared to the control mortar at a strain rate of 200/s. The rate dependent constitutive responses enable the computation of energy absorption, which serves as a comparative measure for elucidating the material resistance to impact loads. Approximately a 45% increase in the dynamic energy absorption capacity is observed for the mixture containing 10% wollastonite fibers, as compared to the control case. Overall, the study establishes wollastonite fibers as a sustainable and dynamic performance-enhanced alternative for partial cement replacement. Moreover, the multiscale numerical simulation approach for performance prediction can provide an efficient means for the materials designers and engineers to optimize the size and dosage of wollastonite fibers for desired mechanical performance under dynamic loading conditions.

Prospect of Metal Ceramic (Titanium-Wollastonite) Composite as Permanent Bone Implants: A Narrative Review

This literature review discusses the influence of titanium ceramic composites as a biomaterial towards the fabrication of implants for orthopedic applications. The concept of applying metal-ceramic composites enable many novel combinations in the design and fabrication of complex materials which enhances functionality to improve cell and tissue matrix interactions particularly in the formation of bone. Specific focus is placed on its plethora of materials selected from the metals and ceramic group and identifying the optimal combination that matches them. The prospect of wollastonite as the ceramic counterpart is also highlighted. In this review, we have highlighted the different fabrication methods for such metal-ceramic materials as well as the role that these hybrids play in an in vitro and in vivo environment. Its economic potential as a bone implant material is also discussed.

Value-added utilization of paper sludge: Preparing activated carbon for efficient adsorption of Cr(VI) and further hydrogenation of furfural

After normal alkali treatment process, the industrial Cr(VI) containing wastewater still contains a ppm level of Cr(VI) ions which should be further purified before discharging. In this study, the Cr(VI)-containing wastewater has been efficiently treated by the porous paper sludge-based activated carbon (psAC) with an excellent specific surface area and rich oxygen functional groups. The batch experimental results showed that under acidic conditions, pH has little effect on the Cr(VI) removal. The kinetic and isotherms studies showed that the Elovich and Freundlich model could describe the adsorption process well and the maximum adsorption capacity of psAC was 54.04 mg/g. The thermodynamic studies indicated that the reaction process was endothermic and spontaneous. Adsorption enthalpy was 17.37 kJ/mol, showing that the chemisorption process was a hydrogen bonding-controlled that has been also verified by some analytical techniques. Lastly, this study also provided an idea for reutilization of waster Cr(VI)-contained psAC in furfural hydrogenation.

Development of 3D Bioactive Scaffolds through 3D Printing Using Wollastonite-Gelatin Inks

The bioactivity of scaffolds represents a key property to facilitate the bone repair after orthopedic trauma. This study reports the development of biomimetic paste-type inks based on wollastonite (CS) and fish gelatin (FG) in a mass ratio similar to natural bone, as an appealing strategy to promote the mineralization during scaffold incubation in simulated body fluid (SBF). High-resolution 3D scaffolds were fabricated through 3D printing, and the homogeneous distribution of CS in the protein matrix was revealed by scanning electron microscopy/energy-dispersive X-ray diffraction analysis (SEM/EDX) micrographs. The bioactivity of the scaffold was suggested by an outstanding mineralization capacity revealed by the apatite layers deposited on the scaffold surface after immersion in SBF. The biocompatibility was demonstrated by cell proliferation established by MTT assay and fluorescence microscopy images and confirmed by SEM micrographs illustrating cell spreading. This work highlights the potential of the bicomponent inks to fabricate 3D bioactive scaffolds and predicts the osteogenic properties for bone regeneration applications.

Wollastonite as filler of an experimental dental adhesive

OBJECTIVE

The aim of this study was to formulate experimental dental adhesives with wollastonite and evaluate the physical, chemical, and bioactivity properties of the resins.

METHODS

Wollastonite was characterized by Fourier transform infrared spectroscopy, X-ray and laser diffraction analyses, and scanning electronic microscopy. An experimental adhesive resin was formulated, and wollastonite was used as filler at 0 (control group), 0.5, 1, or 2 wt.%. Radiopacity, degree of conversion (DC%), microhardness, softening in solvent, ultimate tensile strength (UTS), 24 h- and 1 year- microtensile bond strength (μTBS), mineral deposition, and color of the adhesives were evaluated.

RESULTS

Wollastonite particles showed a needle-like shape, a mean diameter of 70 (± 30) μm, characteristic chemical peaks, and pure crystalline β-CaSiO₃ phase. There were no significant differences (p > 0.05) for radiopacity, softening in solvent, and color change. The group with 2 wt.% of wollastonite showed higher microhardness and UTS in comparison to the control group (p < 0.05). After one year, the control group showed reduced μTBS compared to the immediate value (p < 0.05). The groups with wollastonite presented stable μTBS after one year in comparison to the immediate μTBS (p > 0.05). Wollastonite induced mineral deposition on the adhesive surface over the time of storage in simulated body fluid.

CONCLUSION

The addition of wollastonite improved the mechanical behavior of the adhesive without changing the analyzed chemical properties. The adhesives with this filler presented mineral deposition and acceptable clinical color. Moreover, dentin treated with wollastonite-doped adhesives showed higher bonding stability after one year of aging.

CLINICAL SIGNIFICANCE

Wollastonite, a silicate-based material, provided bioactivity for the adhesives, which assists in producing therapeutic tooth-restoration interfaces. Moreover, the incorporation of this mineral improOfiller to improve the biological properties of adhesives and assist in dentin-restoration stability.