Modification of Physico-Chemical Properties of Acryl-Coated Polypropylene Foils for Food Packaging by Reactive Particles from Oxygen Plasma

Functional Acrylic Resins Prepared via Photo-Induced Telomerization Using Tetrabromomethane as Telogen

Novel method of obtaining functional acrylic resins (FARs) containing carboxyl- and benzophenone groups (in-chain functionalization) and terminal Br atoms was verified. Acrylic oligomers were prepared by a solution-free, UV-initiated telomerization process of basic monomer (n-butyl acrylate) and functional monomers (acrylic acid and 4-acrylooxybenzophenone) in the presence of radical photoinitiator and different amount of tetrabromomethane (CBr4) as telogen. The effect of telogen content on UV-telomerization kinetics as well as physicochemical and thermal (Tg) properties of FARs was investigated. A telogen content higher than 5 wt. parts does not affect the UV-telomerization rate (photo-DSC), the molecular weights of telomers (GPC), or their glass transition temperature (DSC), but it significantly increases the conversion of monomers (up to 88%) and lowers the viscosity of FARs (approx. 6 Pa·s). NMR studies confirmed the inclusion of CBr4 in the structure of functional acrylic telomers.

Effects of non-thermal atmospheric plasma on protein

Currently, the advancement in non-thermal atmospheric plasma technology enables plasma treatments on some heat-sensitive targets, including biological substances, without unspecific damage caused by thermal effect. The significant effects of non-thermal atmospheric plasma modulating biological events have been demonstrated by considerable studies. Protein, one of the most important biomolecules, participates in the majority of the life-sustaining activities in all organisms, whose functions are derived from the diverse biochemical properties of amino acid compositions and four-tiered protein structure hierarchy. Therefore, the knowledge of how non-thermal atmospheric plasma affects protein greatly benefits the understanding and application of the non-thermal atmospheric plasma's effect in biological area. In this review, we summarize recent research progress on the effects of non-thermal atmospheric plasma, particularly its reactive species, on biochemical and biophysical characteristics of proteins at different structural levels that leads to their functional changes. Moreover, the physiological effects of non-thermal atmospheric plasma at cellular or organism level driven by the manipulations on protein and their relative application prospects are reviewed. Despite the exceptional application potential, the exploration of the non-thermal atmospheric plasma's effect on protein still confronts with difficulties due to the limited knowledge of the underlying mechanisms and the complexity of non-thermal atmospheric plasma operation systems, which requires further studies and standardization of non-thermal atmospheric plasma treatments.

Plasma Activation of Polyethylene Powder

Polyethylene powder of average particle diameter of 160 µm was activated in a plasma reactor made from aluminum of volume 64 dm³ at the pressure 100 Pa. Dense oxygen plasma was sustained with a microwave discharge powered by a pulsed magnetron source of power 1 kW mounted onto the top flange of the plasma reactor. Polymer powder was treated in a batch mode with 0.25 kg/batch. The powder was placed into a stainless-steel dish mounted in the center of the reactor where diffusing plasma of low ion density, and the O-atom density of 2 × 10²¹ m⁻³ was sustained. The powder was stirred in the dish at the rate of 40 rpm. The evolution of powder wettability versus treatment time was measured using the Washburne method, and the surface composition was determined by X-ray Photoelectron Spectroscopy (XPS). The wettability versus the oxygen concentration assumed a parabolic behavior. The maximal oxygen concentration, as revealed by XPS, was 17.5 at.%, and the maximal increase of wettability was 220%. The efficiency of O-atoms utilization in these experimental conditions was about 10% taking into account the spherical geometry of dust particles and perfectly smooth surface. The method is scalable to large industrial systems.

Two-Layer Functional Coatings of Chitosan Particles with Embedded Catechin and Pomegranate Extracts for Potential Active Packaging

Two-layer functional coatings for polyethylene (PE) and polypropylene (PP) films were developed for the active packaging concept. Prior to coating, the polymer films were activated by O2 and NH3 plasma to increase their surface free energy and to improve the binding capacity and stability of the coatings. The first layer was prepared from a macromolecular chitosan solution, while the second (upper) layer contained chitosan particles with embedded catechin or pomegranate extract. Functionalized films were analyzed physico-chemically to elemental composition using ATR-FTIR spectroscopy and XPS. Further, oxygen permeability and wettability (Contact Angle) were examined. The antimicrobial properties were analyzed by the standard ISO 22196 method, while the antioxidative properties were determined with an ABTS assay. Functionalized films show excellent antioxidative and antimicrobial efficacy. A huge decrease in oxygen permeability was achieved in addition. Moreover, a desorption experiment was also performed, confirming that the migration profile of a compound from the surfaces was in accordance with the required overall migration limit. All these properties indicate the great potential of the developed active films/foils for end-uses in food packaging.

Surface Modification of Polycarbonate by an Atmospheric Pressure Argon Microwave Plasma Sheet

The specific properties of an atmospheric pressure plasma make it an attractive tool for the surface treatment of various materials. With this in mind, this paper presents the results of experimental investigations of a polycarbonate (PC) material surface modification using this new type of argon microwave (2.45 GHz) plasma source. The uniqueness of the new plasma source lies in the shape of the generated plasma-in contrast to other microwave plasma sources, which usually provide a plasma in the form of a flame or column, the new ones provides a plasma in the shape of a regular plasma sheet. The influence of the absorbed microwave power and the number of scans on the changes of the wettability and morphological and mechanical properties of the plasma-treated PC samples was investigated. The mechanical properties and changes in roughness of the samples were measured by the use of atomic force microscopy (AFM). The wettability of the plasma-modified samples was tested by measuring the water contact angle. In order to confirm the plasma effect, each of the above-mentioned measurements was performed before and after plasma treatment. All experimental tests were performed with an argon of flow rate up to 20 L/min and the absorbed microwave power ranged from 300 to 850 W. The results prove the capability of the new atmospheric pressure plasma type in modifying the morphological and mechanical properties of PC surfaces for industrial applications.

Surface Modification to Improve Properties of Materials

Surface properties of modern materials are usually inadequate in terms of wettability, adhesion properties, biocompatibility etc., so they should be modified prior to application or any further processing such as coating with functional materials. Both the morphological properties and chemical structure/composition should be modified in order to obtain a desired surface finish. Various treatment procedures have been employed, and many are based on the application of non-equilibrium gaseous media, especially gaseous plasma. Although such treatments have been studied extensively in past decades and actually commercialized, the exact mechanisms of interaction between reactive gaseous species and solid materials is still inadequately understood. This special issue provides recent trends in nanostructuring and functionalization of solid materials with the goal of improving their functional properties.

Surface Functionalization of Polyethylene Granules by Treatment with Low-Pressure Air Plasma

Polyethylene granules of diameter 2 mm were treated with a low-pressure weakly ionized air plasma created in a metallic chamber by a pulsed microwave discharge of pulse duration 180 μs and duty cycle 70%. Optical emission spectroscopy showed rich bands of neutral nitrogen molecules and weak O-atom transitions, but the emission from N atoms was below the detection limit. The density of O atoms in the plasma above the samples was measured with a cobalt catalytic probe and exhibited a broad peak at the pressure of 80 Pa, where it was about 2.3 × 10²¹ m⁻³. The samples were characterized by X-ray photoelectron spectroscopy. Survey spectra showed oxygen on the surface, while the nitrogen concentration remained below the detection limit for all conditions. The high-resolution C1s peaks revealed formation of various functional groups rather independently from treatment parameters. The results were explained by extensive dissociation of oxygen molecules in the gaseous plasma and negligible flux of N atoms on the polymer surface.