Drug Release of Hybrid Materials Containing Fe(II)Citrate Synthesized by Sol-Gel Technique

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Preparation and related properties of melanin iron supplement

In this study, BM-Fe (black sesame melanin-iron complex) was prepared and characterized. The results showed that the carboxyl hydroxyl group of BSM (black sesame melanin) participated in the chelation of iron ions. EDS (energy dispersive spectroscopy) and XPS (X-ray photoelectron spectroscopy) results confirmed the presence of iron ions in BM-Fe. The results of DLS (dynamic light scattering) showed that the average particle sizes of BSM and BM-Fe were 844.9 nm and 294.3 nm, respectively, indicating that the structure of BM-Fe with a smaller particle size was formed after the binding of iron ions with the active group on BSM. Finally, the in vitro iron dissolution, iron ion identification, in vitro iron ion reduction, antioxidant activity, cytotoxicity and moisture resistance properties of BM-Fe and FST (ferrous sulfate tablets, a commonly used iron supplement) were comprehensively compared. The results showed that BSM combined with iron instead of physically mixing, and BM-Fe was easily reduced in the gastrointestinal environment. BM-Fe had good bioavailability and retained the excellent characteristics (such as oxidation resistance and biocompatibility) of BSM, and had the potential to be applied in the treatment of iron-deficiency-related diseases. In summary, BM-Fe prepared in this study not only retained the excellent characteristics of BSM but also had a good effect on iron supplementation, high bioavailability and low side effects. Comprehensive analysis showed that the performance of BM-Fe prepared in this study was similar to or even better than that of the control (FST). Thus, BM-Fe is expected to become a new comprehensive multi-functional iron supplement and has a broad developmental prospect.

Antibacterial Activity and Iron Release of Organic-Inorganic Hybrid Biomaterials Synthesized via the Sol-Gel Route

The aim of this work was the synthesis of hybrid materials of iron (II)-based therapeutic systems via the sol-gel method. Increasing amounts of polyethylene glycol (PEG 6, 12, 24, 50 wt%) were added to SiO2/Fe20 wt% to modulate the release kinetics of the drug from the systems. Fourier-transform infrared (FTIR) spectroscopy was used to study the interactions between different components in the hybrid materials. The release kinetics in a simulated body fluid (SBF) were investigated, and the amount of Fe2+ released was detected via ultraviolet-visible spectroscopy (UV-Vis) after reaction with ortho-phenanthroline. Furthermore, biological characterization was carried out. The bioactivity of the synthesized hybrid materials was evaluated via the formation of a layer of hydroxyapatite on the surface of samples soaked in SBF using spectroscopy. Finally, the potential antibacterial properties of seven different materials against two different bacteria—E. coli and S. aureus—were investigated.

FT-IR Characterization of Antimicrobial Hybrid Materials through Sol-Gel Synthesis

Silica/polycaprolactone and titania/polycaprolactone hybrid organic/inorganic amorphous composites were prepared via a sol-gel method starting from a multi-element solution containing tetramethyl orthosilicate (TMOS) or titanium butoxide (TBT), polycaprolactone (PCL), water and methylethylketone (MEK). The molecular structure of the crosslinked network was based on the presence of the hydrogen bonds between organic/inorganic elements as confirmed by Fourier Transform Infra-Red (FT-IR) analysis. In particular, the structure of crosslinked network was realized by hydrogen bonds between the X-OH (X = Si or Ti) group (H donator) in the sol-gel intermediate species and ester groups (H-acceptors) in the repeating units of the polymer. The morphology of the hybrid materials; pore size distribution, elemental homogeneity and surface features, was studied by scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) and by atomic force microscopy (AFM). The bioactivity of the synthesized hybrid materials was confirmed by observing the formation of a layer of hydroxyapatite (HAP) on the surface of the samples soaked in a simulated body fluid. The antimicrobial behavior of synthetized hybrids was also assessed against Escherichia coli bacteria. In conclusion, the prepared hybrid materials are proposed for use as future bone implants.

New SiO2/Caffeic Acid Hybrid Materials: Synthesis, Spectroscopic Characterization, and Bioactivity

The sol–gel route represents a valuable technique to obtain functional materials, in which organic and inorganic members are closely connected. Herein, four hybrid materials, containing caffeic acid entrapped in a silica matrix at 5, 10, 15, and 20 wt.%, were synthesized and characterized through Fourier-Transform Infrared (FT-IR) and Ultraviolet-Visible (UV–Vis) spectroscopy. FT-IR analysis was also performed to evaluate the ability to induce the hydroxyapatite nucleation. Despite some structural changes occurring on the phenol molecular skeleton, hybrid materials showed scavenging properties vs. 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical and 2,2′-azinobis-(3-ethylbenzothiazolin-6-sulfonic acid) radical cation (ABTS•⁺), which was dependent on the tested dose and on the caffeic acid wt.%. The SiO₂/caffeic acid materials are proposed as valuable antibacterial agents against Escherichia coli and Enterococcus faecalis.

Functional biohybrid materials based on halloysite, sepiolite and cellulose nanofibers for health applications

Biohybrid materials were prepared by co-assembling the three following components: nanotubular halloysite, microfibrous sepiolite, and cellulose nanofibers dispersed in water, in order to exploit the most salient features of each individual component and to render homogeneous, flexible, yet strong films. Indeed, the incorporation of halloysite improves the mechanical performance of the resulting hybrid nanopapers and the assembly of the three components modifies the surface features concerning wetting properties compared to pristine materials, so that the main characteristics of the resulting materials become tunable with regard to certain properties. Owing to their hierarchical porosity together with their diverse surface characteristics, these hybrids can be used in diverse biomedical/pharmaceutical applications. Herein, for instance, loading with two model drugs, salicylic acid and ibuprofen, allows controlled and sustained release as deduced from antimicrobial assays, opening a versatile path for developing other related organic-inorganic materials of potential interest in diverse application fields.

The Preparation and Chemical Structure Analysis of Novel POSS-Based Porous Materials

In this work, we reported the preparation and chemical analysis of novel polyhedral oligomeric silsesquioxane (POSS)-based porous materials, which were prepared according to Friedel-Crafts chloromethylation by using aluminum chloride as the catalyst and dichloromethane as the solvent. Through controlling the treatment solvent (water or methanol) and kinds of POSS, several materials with different morphologies were conveniently obtained. The chemical structure of porous materials was systematically characterized by Fourier-transform infrared (FTIR) spectra, ²⁹Si Nuclear Magnetic Resonance (NMR), ¹³C NMR, and X-ray photoelectron spectroscopy (XPS). The samples were further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) to study their crystallinity, morphology, and thermal properties, respectively. The work systematically demonstrated the chemical structure of the porous materials. Moreover, the advantages and disadvantages of the preparation method and typical properties of the material were evaluated through a comparative analysis with other related research works.

Threads Made with Blended Biopolymers: Mechanical, Physical and Biological Features

Poly (Lactic Acid), PLA, and Poly (ε-CaproLactone), PCL, compatibilized with Ethyl Ester l-Lysine Triisocyanate (LTI) can be employed as biomaterials. We mixed PLA with PCL and LTI in a twin extruder and by a melt spinning process obtained threads with an average diameter of about 0.3 mm. In order to study the possible application of these threads, mechanical tensile (with the calorimetric and morphological investigations) and biological tests were performed. The results highlighted these biopolymers as promising materials for sutures since they can be rigid and elastic (especially by increasing the PCL amount in the blend), and they are bioactive, able to inhibit bacterial growth. This paper represents a starting point to optimize the blend composition for biomedical suture application.

A novel, doped calcium silicate bioceramic synthesized by sol-gel method: Investigation of setting time and biological properties

The aim of the current study was to synthesize a fast-setting ion-doped calcium silicate bioceramic by the sol-gel method and to characterize its in vitro apatite-forming ability and cell viability. Calcium silicate (CS), doped calcium silicate with zinc and magnesium, with Ca/Zn molar ratios of 6.7:1 (DCS1), and 4.5:1 (DCS2), were synthesized by the sol-gel method. Matreva white MTA (WMTA, Matreva, CA, Egypt) was used as a control. The synthesized powders were characterized by x-ray diffraction. Setting time was measured using the Gilmore needle indentation technique. The in vitro apatite-forming ability of the materials was evaluated by scanning electron microscope and energy dispersive X-ray. NIH3T3-E1 cells viability was tested using MTT assay. The ion release of Ca, Si, Zn, and Mg was measured using inductive coupled plasma-optical emission spectroscopy (ICP-OES). One-way ANOVA was used to analyze setting time results. The Tukey's HSD post hoc test was used to establish significance (p < 0.001). For nonparametric data, the Kruskal-Wallis H test with Dunn's correction for post hoc comparison was used (p < 0.05). CS, DCS1, and DCS2 showed a significant decrease in setting time 33 ± 1.63 min, 28 ± 1.63 min, and 41.75 ± 2.87 min, respectively, compared to WMTA 91 ± 3.16 min (p < 0.001). DCS1 showed the highest apatite-forming ability and cell viability compared to the other groups. Ca and Si ions release decreased in both DCS1 and DCS2. The physical and biological properties of CS can be successfully improved by the sol-gel synthesis and ions doping. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:56-66, 2020.

Synthesis and Characterization of TiO₂-ZnO-MgO Mixed Oxide and Their Antibacterial Activity

TiO₂-ZnO-MgO mixed oxide nanomaterials (MONs) were synthetized via the sol-gel method and characterized by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), nitrogen physisorption analysis, X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), Fourier transform infrared spectroscopy (FTIR), and color (Luminosity (L), a, b, Chrome, hue) parameters. Furthermore, the antimicrobial activity of the MONs was tested against Escherichia coli (EC), Salmonella paratyphi (SP), Staphylococcus aureus (SA), and Listeria monocytogenes (LM). The MONs presented a semi globular-ovoid shape of ≤100 nm. Samples were classified as mesoporous materials and preserved in the TiO₂ anatase phase, with slight changes in the color parameters of the MONs in comparison with pure TiO₂. The MONs exhibited antimicrobial activity, and their effect on the tested bacteria was in the following order: EC > SP > SA > LM. Therefore, MONs could be used as antimicrobial agents for industrial applications.

Development and Characterization of Bioactive Glass Containing Composite Coatings with Ion Releasing Function for Antibiotic-Free Antibacterial Surgical Sutures

Resorbable (Vicryl® Plus) sutures were coated with zinc-doped glass (Zn-BG) and silver-doped ordered mesoporous bioactive glass (Ag-MBG) particles by a dip coating technique. A multilayer approach was used to achieve robust coatings. The first coating was a polymeric layer (e.g., PCL or chitosan) and the second one was a composite made of BG particles in a polymer matrix. The coatings were characterized in terms of morphology by scanning electron microscopy (SEM), in vitro bioactivity, and antibacterial properties. Chitosan/Ag-MBG coatings showed the ability to form hydroxyl-carbonate-apatite on their surfaces after immersion in SBF. An antibacterial effect against Gram (+) and Gram (-) bacteria was confirmed, highlighting the potential application of the coated sutures for antibiotic-free approaches.

Biological relevance of CuFeO2 nanoparticles: Antibacterial and anti-inflammatory activity, genotoxicity, DNA and protein interactions

Heterometal oxide nanoparticles of bioessential metals are shedding new light to nanoparticle-inspired bioapplications. Pairing bioreactive elements like copper and iron can affect the redox dynamic and biological profile of the nanomaterial. Given the complexity of physicochemical properties, biological activity and toxicity concerns, extensive exploration is demanded, especially when active and less active oxidation states participate as in case of cuprous-ferric delafossite CuFeO₂ (copper(I)-iron(III)), a less widespread nanomaterial. In that vein, CuFeO₂ nanoparticles were synthesized and biological profile was evaluated in comparison with cuprous oxide (Cu₂O NPs) counterpart, an already established antimicrobial agent. Interactions with bacteria, proteins and DNA were examined. Cu₂O NPs exhibited stronger antibacterial activity (IC₅₀ < 25 μg/ml) than CuFeO₂ NPs (IC₅₀ > 100 μg/ml). In vitro exposure of nanoparticles on plasmid DNA unveiled toxicity in the form of DNA damage for Cu₂O and enhanced biocompatibility for CuFeO₂ NPs. Genotoxicity estimated by the frequency of sister chromatid exchanges, cytostaticity based on the proliferating rate indices and cytotoxicity based on the mitotic indices at human peripheral lymphocyte cultures were all significantly lower in the case of CuFeO₂ NPs. Furthermore, through in vitro albumin denaturation assay, CuFeO₂ NPs showed better performance in protein denaturation protection, correlating in superior anti-inflammatory activity than Cu₂O and similar to acetylsalicylic acid. Synergy of copper(I)-iron(III) in nanoscale is apparent and gives rise to fruitful bioapplications and perspectives.

Sol⁻Gel Synthesis of Silica-Based Materials with Different Percentages of PEG or PCL and High Chlorogenic Acid Content

Implanted biomedical devices can induce adverse responses in the human body, which can cause failure of the implant-referred to as implant failure. Early implant failure is induced numerous factors, most importantly, infection and inflammation. Natural products are, today, one of the main sources of new drug molecules due to the development of pathogenic bacterial strains that possess resistance to more antibiotics used currently in various diseases. The aim of this work is the sol⁻gel synthesis of antibacterial biomedical implants. In the silica matrix, different percentages (6, 12, 24, 50 wt %) of polyethylene glycol (PEG) or poly(ε-caprolactone) (PCL) were embedded. Subsequently, the ethanol solutions with high amounts of chlorogenic acid (CGA 20 wt %) were slowly added to SiO₂/PEG and SiO₂/PCL sol. The interactions among different organic and inorganic phases in the hybrid materials was studied by Fourier transform infrared (FTIR) spectroscopy. Furthermore, the materials were soaked in simulated body fluid (SBF) for 21 days and the formation of a hydroxyapatite layer on their surface was evaluated by FTIR and XRD analysis. Finally, Escherichia coli and Pseudomonas aeruginosa were incubated with several hybrids, and the diameter of zone of inhibition was observed to assessment the potential antibacterial properties of the hybrids.

Chlorogenic Acid Entrapped in Hybrid Materials with High PEG Content: A Strategy to Obtain Antioxidant Functionalized Biomaterials?

The formation of pro-oxidant species after implantation of biomaterials could be responsible for the failure of the implant itself, because of oxidative stress-induced damage. In this work, the SiO₂/polyethylene glycol (PEG)/chlorogenic acid (CGA) hybrids synthesized by the sol⁻gel method with 50 wt% of the polymer and different amounts of CGA (5, 10, 15 and 20 wt%) were studied. The hybrids soaked in simulated body fluid (SBF) showed the formation of hydroxyapatite layers on their surface, suggesting that the hybrids are bioactive. Their radical scavenging capacity towards DPPH· and ABTS·+ (2,2'-Azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), evaluated at three different doses (0.5, 1 and 2 mg), showed probe- and dose-dependent behavior. In addition, the antioxidant properties of CGA were not affected by the presence of high amounts of the polymer. The in vitro biocompatibility in three cell lines (NIH 3T3, HaCaT and SH-SY5Y) was assessed by using the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. Apart from SH-SY5Y, the cell viability-expressed as mitochondrial redox activity percentage of cells directly exposed to powders-and morphology was not affected, suggesting that the hybrids have the ability to interfere and act selectively against tumor cells. The antibacterial properties of the different materials against Escherichia coli and Enterococcus faecalis were affected by different amounts of the natural antioxidant component.