Mechanical Behaviour of Silicone Membranes Saturated with Short Strand, Loose Polyester Fibres for Prosthetic and Rehabilitative Surrogate Skin Applications

Development and characterisation of hybrid composite skin simulants based on short polyethylene fibre and bioactive glass particle-reinforced silicone

Silicone elastomers are widely recognised as artificial skins for medical prosthesis and cranial injury assessment. Since silicone is not an ideal skin simulant due to the lack of mechanical stiffness and a fibrous structure, the present study aimed to tailor the mechanical and structural characteristics of silicone by integrating biocompatible reinforcements (namely, short polyethylene fibres and bioglass particles) to develop suitable bio-integrative skin simulant candidates. The influences of short polyethylene fibres and bioglass particles in the selected platinum silicone on the mechanical properties of silicone-based composite skin simulants were investigated with various factors, including filler concentration, KMnO4 surface treatment of the polyethylene fibre, and particle size. A comprehensive assessment of the tensile, compressive, and hardness properties of the examined composites was conducted, and they were compared with the properties of human biological skin. The results exhibited that the elastic moduli and the hardness of all composites increased with the concentration of both reinforcements. While integrating only the bioglass particles had the advantage of an insignificant effect on the hardness change of the silicone matrix, the composite with polyethylene fibres possessed superior tensile elastic modulus and tensile strength compared to those of the bioglass reinforced composite. The composites with 5% untreated polyethylene fibres, KMnO4 surface-treated fibres, and bioglass reinforcements enhanced the tensile elastic moduli from the pure silicone up to 32%, 44%, and 22%, respectively. It reflected that the surface treatment of the fibres promotes better interfacial adhesion between the silicone matrix and the fibres. Moreover, the smaller bioglass particle had a greater mechanical contribution than the larger glass particle. Systematically characterised for the first time, the developed composite skin simulants demonstrated essential mechanical properties within the range of the human skin and constituted better skin alternatives than pure silicone for various biomedical applications.

Synthesis and characterisation of a cancerous liver for presurgical planning and training applications

OBJECTIVES

Oncology surgeons use animals and cadavers in training because of a lack of alternatives. The aim of this work was to develop a design methodology to create synthetic liver models familiar to surgeons, and to help plan, teach and rehearse patient-specific cancerous liver resection surgery.

DESIGN

Synthetic gels were selected and processed to recreate accurate anthropomorphic qualities. Organic and synthetic materials were mechanically tested with the same equipment and standards to determine physical properties like hardness, elastic modulus and viscoelasticity. Collected data were compared with published data on the human liver. Patient-specific CT data were segmented and reconstructed and additive manufactured models were made of the liver vasculature, parenchyma and lesion. Using toolmaking and dissolvable scaffolds, models were transformed into tactile duplicates that could mimic liver tissue behaviour.

RESULTS

Porcine liver tissue hardness was found to be 23 H00 (±0.1) and synthetic liver was 10 H00 (±2.3), while human parenchyma was reported as 15.06 H00 (±2.64). Average elastic Young's modulus of human liver was reported as 0.012 MPa, and synthetic liver was 0.012 MPa, but warmed porcine parenchyma was 0.28 MPa. The final liver model demonstrated a time-dependant viscoelastic response to cyclic loading.

CONCLUSION

Synthetic liver was better than porcine liver at recreating the mechanical properties of living human liver. Warmed porcine liver was more brittle, less extensible and stiffer than both human and synthetic tissues. Qualitative surgical assessment of the model by a consultant liver surgeon showed vasculature was explorable and that bimanual palpation, organ delivery, transposition and organ slumping were analogous to human liver behaviour.

Au@Ag Nanorods-PDMS Wearable Mouthguard as a Visualized Detection Platform for Screening Dental Caries and Periodontal Diseases

The development of easy-to-use, low-cost, and visualized detection platforms for screening human dental caries and periodontal diseases is in urgent demand. In this work, a Au@Ag nanorods-poly(dimethylsiloxane) (Au@Ag NRs-PDMS) wearable mouthguard, which can visualize the tooth lesion sites through the color change of it at the corresponding locations, is presented. The Au@Ag NRs-PDMS composite exhibits a distinct color response to hydrogen sulfide (H₂ S) gas generated by bacterial decay at the lesion sites. Moreover, the Au@Ag NRs-PDMS mouthguard is demonstrated to own desired mechanical properties, excellent chemical stability, as well as good biocompatibility, and can accurately locate the lesion sites in human oral cavity. These findings suggest that the mouthguard has the potential to be utilized on a large scale to help people self-monitor their oral health in daily life, and treat oral diseases locally.

Fibre Bragg Grating Based Interface Pressure Sensor for Compression Therapy

Compression therapy is widely used as the gold standard for management of chronic venous insufficiency and venous leg ulcers, and the amount of pressure applied during the compression therapy is crucial in supporting healing. A fibre optic pressure sensor using Fibre Bragg Gratings (FBGs) is developed in this paper to measure sub-bandage pressure whilst removing cross-sensitivity due to strain in the fibre and temperature. The interface pressure is measured by an FBG encapsulated in a polymer and housed in a textile to minimise discomfort for the patient. The repeatability of a manual fabrication process is investigated by fabricating and calibrating ten sensors. A customized calibration setup consisting of a programmable translation stage and a weighing scale gives sensitivities in the range 0.4–1.5 pm/mmHg (2.6–11.3 pm/kPa). An alternative calibration method using a rigid plastic cylinder and a blood pressure cuff is also demonstrated. Investigations are performed with the sensor under a compression bandage on a phantom leg to test the response of the sensor to changing pressures in static situations. Measurements are taken on a human subject to demonstrate changes in interface pressure under a compression bandage during motion to mimic a clinical application. These results are compared to the current gold standard medical sensor using a Bland–Altman analysis, with a median bias ranging from −4.6 to −20.4 mmHg, upper limit of agreement (LOA) from −13.5 to 2.7 mmHg and lower LOA from −32.4 to −7.7 mmHg. The sensor has the potential to be used as a training tool for nurses and can be left in situ to monitor bandage pressure during compression therapy.

Fetal Movement Counting Using Optical Fibre Sensors

Daily fetal movement counting based on maternal perception is widely deployed to monitor fetal wellbeing. However, the counting performed by the mother is prone to errors for various reasons. There are limited devices on the market that can provide reliable and automatic counting. This paper presents a prototype of a novel fetal movement monitoring device based on fibre Bragg grating sensors. Deformation of the skin caused by a fetal movement can lead to a change of the strain and stress on the optical fibre sensors, therefore can induce distortions to the breathing pattern of the mother. In the study data was gathered by the sensors through strain measurement and was post-processed using independent component analysis (ICA) and high-pass filtering to show the instances of the fetal movements. Information gathered during user trials with the prototype suggests that the system detects significantly higher numbers of fetus movements than that observed based on the mother's perception. Among the various techniques available for fetal movement monitoring, fibre optic sensing provides many advantages including multiplex capability, flexibility and minimal size, making the concept an attractive solution for reliable monitoring of antenatal fetal movements.