Effect of Diisocyanates as Compatibilizer on the Properties of BF/PBAT Composites by In Situ Reactive Compatibilization, Crosslinking and Chain Extension

Lignocellulose based biofiller reinforced biopolymer composites from fruit peel wastes as natural pigment

In this study, the utilization of mangosteen and durian peel wastes as bio-filler and natural pigment in biopolymer of polybutyrate adipate terephthalate (PBAT) were examined. The related research work of hybridization of both mangosteen and durian peels reinforced in biopolymer as cellulose-based bio fillers and natural pigment is rarely studied. The content variation of mangosteen powder and durian powder ranged from 0 to 30 wt% with an increment of 10. The influence of mangosteen and durian powders reinforced in PBAT on color change, morphological, chemical composition, mechanical, thermal, and rheological properties were determined. Mangosteen peel and durian peel provided dark appearance for the green composites without pre-burn of these fruit peels. It can be concluded that mangosteen peel and durian peel can be used as bio pigment and natural reinforcement material in biopolymer matrix which can reduce massive waste of mangosteen and durian peel and add value to these wastes. These black biopolymer composites can be used in applications of eco-friendly food packaging and medicine zipper packaging. The overall mechanical properties, thermal stability, and dark color of mangosteen/PBAT composites were greater than those of durian/PBAT composites. However, durian/PBAT composites presented greater thermal and rheological properties than mangosteen/PBAT composites.

Preparation and Properties of Poly(butylene adipate-co-terephthalate)/thermoplastic Hydroxypropyl Starch Composite Films Reinforced with Nano-Silica

The use of biodegradable plastics is gradually increasing, but its expensive cost limits promotion. In this study, poly(butylene adipate-co-terephthalate)/thermoplastic hydroxypropyl starch reinforced with nano-silica (PBAT/TPHS_g-SiO2) composite films with high hydroxypropyl starch content were prepared in a two-step process. The effect of reinforced thermoplastic hydroxypropyl starch on the mechanical, thermal, processing properties, and micromorphology of the composite films was investigated. The results showed that the tensile strength of the composite films was significantly improved by the addition of nano-silica, with 35% increase in horizontal tensile strength and 21% increase in vertical tensile strength after the addition of 4 phr of nano-silica. When the content of thermoplastic hydroxypropyl starch reinforced with nano-silica (TPHS_g-4SiO2) is 40%, the horizontal and vertical tensile strengths of the films are 9.82 and 12.09 MPa, respectively, and the elongation at break of the films is over 500%. Electron micrographs show that TPHS_g-4SiO2 is better homogeneously dispersed in the PBAT and exhibits a bi-continuous phase structure at a TPHS_g-4SiO2 content of 40%. In this study, the blowing PBAT/TPHS_g-4SiO2 composite films effectively reduce the cost and still show better mechanical properties, which are suitable for packaging applications.

Mater-Bi/Brewers' Spent Grain Biocomposites-Novel Approach to Plant-Based Waste Filler Treatment by Highly Efficient Thermomechanical and Chemical Methods

Thermoplastic starch (TPS) is a homogenous material prepared from native starch and water or other plasticizers subjected to mixing at a temperature exceeding starch gelatinization temperature. It shows major drawbacks like high moisture sensitivity, poor mechanical properties, and thermal stability. To overcome these drawbacks without significant cost increase, TPS could be blended with bio-based or biodegradable polymers and filled with plant-based fillers, beneficially waste-based, like brewers' spent grain (BSG), the main brewing by-product. Filler modifications are often required to enhance the compatibility of such composites. Herein, we investigated the impact of BSG thermomechanical and chemical treatments on the structure, physical, thermal, and rheological performance of Mater-Bi-based composites. Thermomechanical modifications enhanced matrix thermal stability under oxidative conditions delaying degradation onset by 33 °C. Moreover, BSG enhanced the crystallization of the polybutylene adipate terephthalate (PBAT) fraction of Mater-Bi, potentially improving mechanical properties and shortening processing time. BSG chemical treatment with isophorone diisocyanate improved the processing properties of the composites, expressed by a 33% rise in melt flow index. Depending on the waste filler's selected treatment, processing, and rheological performance, thermal stability or interfacial adhesion of composites could be enhanced. Moreover, the appearance of the final materials could be adjusted by filler selection.

Barrier performance and biodegradability of antibacterial poly(butylene adipate-co-terephthalate) nanocomposites reinforced with a new MWCNT-ZnO nanomaterial

A new nanomaterial or nano-filler in the form of multiwalled carbon nanotube-zinc oxide (MWCNT-ZnO) was synthesized for the purpose of modifying poly(butylene adipate-co-terephthalate) (PBAT) and its derivative (modified PBAT or MPBAT) through a melt-blending method (MPBAT was obtained by introducing maleic anhydride groups into PBAT). The effect of the new nano-filler on the properties of resultant nanocomposites was determined from the characterization of mechanical properties, morphology, crystallinity, thermal stability, barrier properties, hydrophilicity, conductivity, antibacterial property, and biodegradability. The results showed that MPBAT nanocomposites had stronger mechanical properties, better barrier properties, and higher electrical conductivity than PBAT nanocomposites. Scanning electron microscopy illustrated that MWCNT-ZnO had better compatibility with MPBAT than with PBAT. At 0.2% MWCNT-ZnO, the MPBAT/MWCNT-ZnO nanocomposite film exhibited the greatest mechanical properties (17.74% increase in tensile strength, 22.17% in yield strength, and 14.29% in elongation at break). When the MWCNT-ZnO content was 0.4%, the nanocomposite film demonstrated the best water vapor barrier ability (an increase of 30.4%). The MPBAT/MWCNT-ZnO film with 0.6% MWCNT-ZnO turned out to have the best oxygen barrier performance (an increase of 130% relative to pure PBAT). It was shown from the results of antibacterial evaluation that the new nanomaterial could impart PBAT and MPBAT with antibacterial activity. The biodegradability tests indicated that an MWCNT-ZnO content of 0.2% could slightly reduce the biodegradability, and when the content was higher than 0.2%, the weight loss rate would increase.

Copper-Catalyzed Selective Arylation of Nitriles with Cyclic Diaryl Iodonium Salts: Direct Access to Structurally Diversified Diarylmethane Amides with Potential Neuroprotective and Anticancer Activities

A novel, simple, and high-yielding approach for the preparation of diarylmethane amide derivatives has been developed by reacting cyclic diaryl iodonium salts with nitriles using CuCl as a catalyst. The procedure is efficient with high atom economy and a wide substrate range. Importantly, selective arylation of nitriles was obtained without affecting the phenyl amino/hydroxyl groups. Furthermore, two of the diarylmethane amides (3k, 3s) displayed excellent neuroprotective and anticancer activities.