Light-Driven Linear Inchworm Motor Based on Liquid Crystal Elastomer Actuators Fabricated with Rubbing Overwriting

A Miniature Traveling Wave Ultrasonic Linear Motor Utilizing Bimorph Transducers

Scaling down linear actuators is crucial for various industrial applications, yet the efficiency of electromagnetic linear actuators decreases significantly as they are miniaturized. Millimeter-scale miniature ultrasonic motors, on the other hand, maintain high efficiency. This article describes a new approach to facilitate the miniaturization of traveling wave linear ultrasonic motors by attaching bimorph transducers to the ends of the stator beams. To control the resonance frequency and facilitate the generation of a traveling flexural wave in the beam, grooves are incorporated into the bimorph structure. Mechanical output is improved by amplifying the transverse displacement through the addition of teeth to the beam. Utilizing the finite element method (FEM), a prototype measuring 10×10×160 mm was designed, fabricated, and tested. It achieved an output speed of 53.7 mm/s and a thrust of 0.83 N at a peak-to-peak voltage of 300 V and a frequency of 32.7 kHz. The results show that the proposed ultrasonic linear motors with small size, simple structure, and overall compactness have promising applications in robotics, precision machining, medical equipment, and other fields requiring miniature compact linear motions.

Dynamic response of a simply supported liquid-crystal elastomer beam under moving illumination

Optically responsive liquid crystal elastomer (LCE) devices have thriving potential to flourish in soft robots and microdrives, owing to their advantages of remote controllability, structural simplicity, and no power supply. In terms of illumination-driven modes, most research has focused on the dynamic response of LCE devices under continuous and periodic illumination, while the theoretical study of the dynamic response under moving illumination is limited. In this paper, based on the coupling of LCE and mechanical deformation under moving illumination, the dynamic model of a LCE simply supported beam is built to investigate its dynamic response under moving illumination. The analytical solution of the dynamic response of the LCE beam under moving illumination is derived through the modal superposition method and the Duhamel integration, and the solution is programed and analyzed with matlab software. By numerical calculations, the influence of the internal and driving parameters of the structure on the dynamic response of the LCE simply supported beam can be analyzed. The results show that when the moving speed of illumination reaches the first-order critical frequency, the maximum amplitude of the dynamic response at the beam mid-span will reach a peak. Meanwhile, the dynamic response of beam can be improved by increasing the illumination width, increasing the light intensity, increasing the shrinkage coefficient, and reducing the damping coefficient. This work provides theoretical guidance for applying the dynamic response of LCE devices under moving illumination in soft robots, microactuators, energy harvesters, sensors, etc.

From Light-Powered Motors, to Micro-Grippers, to Crawling Caterpillars, Snails and Beyond-Light-Responsive Oriented Polymers in Action

"How would you build a robot, the size of a bacteria, powered by light, that would swim towards the light source, escape from it, or could be controlled by means of different light colors, intensities or polarizations?" This was the question that Professor Diederik Wiersma asked PW on a sunny spring day in 2012, when they first met at LENS-the European Laboratory of Nonlinear Spectroscopy-in Sesto Fiorentino, just outside Florence in northern Italy. It was not just a vague question, as Prof. Wiersma, then the LENS director and leader of one of its research groups, already had an idea (and an ERC grant) about how to actually make such micro-robots, using a class of light-responsive oriented polymers, liquid crystal elastomers (LCEs), combined with the most advanced fabrication technique-two-photon 3D laser photolithography. Indeed, over the next few years, the LCE technology, successfully married with the so-called direct laser writing at LENS, resulted in a 60 micrometer long walker developed in Prof. Wiersma's group (as, surprisingly, walking at that stage proved to be easier than swimming). After completing his post-doc at LENS, PW returned to his home Faculty of Physics at the University of Warsaw, and started experimenting with LCE, both in micrometer and millimeter scales, in his newly established Photonic Nanostructure Facility. This paper is a review of how the ideas of using light-powered soft actuators in micromechanics and micro-robotics have been evolving in Warsaw over the last decade and what the outcomes have been so far.

Automated photo-aligned liquid crystal elastomer film fabrication with a low-tech, home-built robotic workstation

Laboratory procedures are often considered so unique that automating them is not economically justified - time and resources invested in designing, building and calibrating the machines are unlikely to pay off. This is particularly true if cheap labour force (technicians or students) is available. Yet, with increasing availability and dropping prices of many off-the-shelf components such as motorised stages, grippers, light sources (LEDs and lasers), detectors (high resolution, fast cameras), as well as user-friendly programmable microprocessors, many of the repeatable tasks may soon be within reach of either custom-built or universal lab robots. Building on our previous work on fabrication, characterization and applications of light-responsive liquid crystal elastomers (LCEs) in micro-robotics and micro-mechanics, in this paper we present a robotic workstation that can make LCE films with arbitrary molecular orientation. Based on a commercial 3D printer, the RoboLEC (Robot for LCE fabrication) performs precision component handling, structured light illumination, liquid dispensing and UV-triggered polymerization, within a four-hour-long procedure. Thus fabricated films with patterned molecular orientation are compared to the same, but handmade, structures.

Smart Materials

The future of engineering systems is based on the capability of integrating sensors, actuators, control systems and materials [...].

Biorobotics: An Overview of Recent Innovations in Artificial Muscles

In this overview of recent developments in the field of biorobotics we cover the developments in materials such as the use of polyester fabric being used as artificial skin and the start of whole new ways to actuate artificial muscles as a whole. In this, we discuss all of the relevant innovations from the fields of nano and microtechnology, as well as in the field of soft robotics to summarize what has been over the last 4 years and what could be improved for artificial muscles in the future. The goal of this paper will be to gain a better understanding of where the current field of biorobotics is at and what its current trends in manufacturing and its techniques are within the last several years.