Effects of Channel Thickness on Electrical Performance and Stability of High-Performance InSnO Thin-Film Transistors

Enhancing the Stability and Mobility of TFTs via Indium-Tungsten Oxide and Zinc Oxide Engineered Heterojunction Channels Annealed in Oxygen Ambient

This study demonstrates a significant enhancement in the performance of thin-film transistors (TFTs) in terms of stability and mobility by combining indium-tungsten oxide (IWO) and zinc oxide (ZnO). IWO/ZnO heterojunction structures were fabricated with different channel thickness ratios and annealing environments. The IWO (5 nm)/ZnO (45 nm) TFT, annealed in O2 ambient, exhibited a high mobility of 26.28 cm2/V·s and a maximum drain current of 1.54 μA at a drain voltage of 10 V, outperforming the single-channel ZnO TFT, with values of 3.8 cm2/V·s and 28.08 nA. This mobility enhancement is attributed to the formation of potential wells at the IWO/ZnO junction, resulting in charge accumulation and improved percolation conduction. The engineered heterojunction channel demonstrated superior stability under positive and negative gate bias stresses compared to the single ZnO channel. The analysis of O 1s spectra showed OI, OII, and OIII peaks, confirming the theoretical mechanism. A bias temperature stress test revealed superior charge-trapping time characteristics at temperatures of 25, 55, and 85 °C compared with the single ZnO channel. The proposed IWO/ZnO heterojunction channel overcomes the limitations of the single ZnO channel and presents an attractive approach for developing TFT-based devices having excellent stability and enhanced mobility.

Effects of Source/Drain Electrodes on the Performance of InSnO Thin-Film Transistors

Oxide thin-film transistors (TFTs) are of increasing interest in the field of advanced displays. In this work, we explore Al, InSnO (ITO), Ti, and Mo as source/drain electrodes of ITO TFTs. A comparison study is conducted on the electrical properties of ITO TFTs with the four categories of source/drain electrodes. Interestingly, the ITO TFT with an Al source/drain electrode exhibits better device performance, such as a field-effect mobility (μFE) of 26.45 cm2/Vs, a reasonable turn-on voltage (VON) of 2.7 V, and a steep subthreshold swing (SS) of 201.50 mV/decade. The contact properties of ITO TFTs are further analyzed, and the results show that the device with an Al electrode exhibits lower contact resistance than the other devices. However, the devices with the four electrode materials all reveal excellent stability under negative bias illumination stress (NBIS) with |ΔVTH| < 1 V. This work paves the way for the practical applications of ITO TFTs in next-generation displays.

Thin-Film Transistors

Thin film transistors (TFTs) are key components used in a variety of fields such as solar cell, active-matrix liquid crystal displays (AM-LCDs), pixel switches, peripheral driver circuit and flexible electronics [...]

Structural Engineering Effects on Hump Characteristics of ZnO/InSnO Heterojunction Thin-Film Transistors

Transparent conductive oxides (TCO) have been extensively investigated as channel materials for thin-film transistors (TFTs). In this study, highly transparent and conductive InSnO (ITO) and ZnO films were deposited, and their material properties were studied in detail. Meanwhile, we fabricated ZnO/ITO heterojunction TFTs, and explored the effects of channel structures on the hump characteristics of ZnO/ITO TFTs. We found that Vhump–VON was negatively correlated with the thickness of the bottom ZnO layer (10, 20, 30, and 40 nm), while it was positively correlated with the thickness of the top ITO layer (3, 5, 7, and 9 nm), where Vhump is the gate voltage corresponding to the occurrence of the hump and VON is the turn-on voltage. The results demonstrated that carrier transport forms dual current paths through both the ZnO and ITO layers, synthetically determining the hump characteristics of the ZnO/ITO TFTs. Notably, the hump was effectively eliminated by reducing the ITO thickness to no more than 5 nm. Furthermore, the hump characteristics of the ZnO/ITO TFTs under positive gate-bias stress (PBS) were examined. This work broadens the practical application of TCO and provides a promising method for solving the hump phenomenon of oxide TFTs.