A Carbon Nanotube-Metal Oxide Hybrid Material for Visible-Blind Flexible UV-Sensor

Improving Definition of Screen-Printed Functional Materials for Sensing Application

Screen printing is one of the most used techniques for developing printed electronics. It stands out for its simplicity, scalability, and effectivity. Specifically, the manufacturing of hybrid integrated circuits has promoted the development of the technique, and the photovoltaic industry has enhanced the printing process by developing high-performance metallization pastes and high-end screens. In recent years, fine lines of 50 μm or smaller are about to be adopted in mass production, and screen printing has to compete with digital printing techniques such as inkjet printing, which can reach narrower lines. In this sense, this work is focused on testing the printing resolution of a high-performance stainless-steel screen with commercial conductive inks and functional lab-made inks based on reduced graphene oxide using an interdigitated structure. We achieved electrically conductive functional patterns with a minimum printing resolution of 40 μm for all inks.

Robust method for uniform coating of carbon nanotubes with V2O5 for next-generation transparent electrodes and Li-ion batteries

Composites comprising vanadium-pentoxide (V2O5) and single-walled carbon nanotubes (SWCNTs) are promising components for emerging applications in optoelectronics, solar cells, chemical and electrochemical sensors, etc. We propose a novel, simple, and facile approach for SWCNT covering with V2O5 by spin coating under ambient conditions. With the hydrolysis-polycondensation of the precursor (vanadyl triisopropoxide) directly on the surface of SWCNTs, the nm-thick layer of oxide is amorphous with a work function of 4.8 eV. The material recrystallizes after thermal treatment at 600 °C, achieving the work function of 5.8 eV. The key advantages of the method are that the obtained coating is uniform with a tunable thickness and does not require vacuuming or heating during processing. We demonstrate the groundbreaking results for two V2O5/SWCNT applications: transparent electrode and cathode for Li-ion batteries. As a transparent electrode, the composite shows stable sheet resistance of 160 Ω sq-1 at a 90% transmittance (550 nm) - the best performance reported for SWCNTs doped by metal oxides. As a cathode material, the obtained specific capacity (330 mA h g-1) is the highest among all the other V2O5/SWCNT cathodes reported so far. This approach opens new horizons for the creation of the next generation of metal oxide composites for various applications, including optoelectronics and electrochemistry.

Acid-modified CNT/Zinc Oxide nanowires based high performance broadband photodetector

In this study, the authors have reported the impact of post-treatment via exposure to acid on single walled carbon nanotubes (SWNTs) thin film (TF) based SWNT/ZnO Nanowire (NW) broad band photodetector. The ZnO NWs were deposited on SWNT (with and without acid-treated) using a simple catalytic free process called glancing angle deposition (GLAD) technique. Acid-treated SWNT samples warranted the growth of high quality ZnO NWs over them. On fabricating photodetectors with the acid-treated ZnO NW/SWNT TF heterostructure (HS) gave better device performance as compared to the as-deposited ZnO NW/SWNT TF HS (without acid-treatment) sample. The acid-treated device showed a large responsivity (85.45 A/W), specific detectivity (0.859 × 10¹² Jones) and with a low noise equivalent power of 3.9101 pW values. Moreover, the oxygen adsorption-desorption mechanism in SWNTs impacted the electrical resistance of the nanotubes which affected nanotube conductivity. The acid-treatment favoured relatively faster charge separation at the ZnO NW/SWNT heterojunction thus providing a fast device response (t_rise = 0.11 s, t_fall = 0.39 s at + 5 V). The fabricated acid-treated device showed good broad band detection (250 nm-750 nm) which was explained with respect to the optical absorption profile of the sample.

Preparation and Bolometric Responses of MoS2 Nanoflowers and Multi-Walled Carbon Nanotube Composite Network

Due to their broadband optical absorption ability and fast response times, carbon nanotube (CNT)-based materials are considered promising alternatives to the toxic compounds used in commercial infrared sensors. However, the direct use of pure CNT networks as infrared sensors for simple resistance read-outs results in low sensitivity values. In this work, MoS2 nanoflowers are composited with CNT networks via a facile hydrothermal process to increase the bolometric performance. The thermal diffusivity (α) against temperature (T) is measured using the transient electro-thermal (TET) technique in the range of 320 K to 296 K. The α-T curve demonstrates that the composite containing MoS2 nanoflowers provides significant phonon scattering and affects the intertube interfaces, decreasing the α value by 51%. As the temperature increases from 296 K to 320 K, the relative temperature coefficient of resistance (TCR) increases from 0.04%/K to 0.25%/K. Combined with the enhanced light absorption and strong anisotropic structure, this CNT–MoS2 composite network exhibits a more than 5-fold greater surface temperature increase under the same laser irradiation. It shows up to 18-fold enhancements in resistive responsivity ((Ron − Roff)/Roff) compared with the pure CNT network for a 1550 nm laser at room temperature (RT).

Self-Assembled 1-Octadecanethiol Membrane on Pd/ZnO for a Selective Room Temperature Flexible Hydrogen Sensor

A layer of self-assembled 1-octadecanethiol was used to fabricate a palladium (Pd)/zinc oxide (ZnO) nanoparticle-based flexible hydrogen sensor with enhanced response and high selectivity at room temperature. A palladium film was first deposited using DC sputtering technique and later annealed to form palladium nanoparticles. The formation of uniform, surfactant-free palladium nanoparticles contributed to improved sensor response towards hydrogen gas at room temperature. The obtained sensor response was higher than for previously reported room temperature Pd/ZnO sensors. Furthermore, the use of the polymer membrane suppressed the sensor’s response to methane, moisture, ethanol, and acetone, resulting in the selective detection of hydrogen in the presence of the common interfering species. This study shows a viable low-cost fabrication pathway for highly selective room temperature flexible hydrogen sensors for hydrogen-powered vehicles and other clean energy applications.

Development of a novel self-sanitizing mask prototype to combat the spread of infectious disease and reduce unnecessary waste

With the spread of COVID-19, significant emphasis has been placed on mitigation techniques such as mask wearing to slow infectious disease transmission. Widespread use of face coverings has revealed challenges such as mask contamination and waste, presenting an opportunity to improve the current technologies. In response, we have developed the Auto-sanitizing Retractable Mask Optimized for Reusability (ARMOR). ARMOR is a novel, reusable face covering that can be quickly disinfected using an array of ultraviolet C lamps contained within a wearable case. A nanomembrane UVC sensor was used to quantify the intensity of germicidal radiation at 18 different locations on the face covering and determine the necessary exposure time to inactivate SARS-CoV-2 in addition to other viruses and bacteria. After experimentation, it was found that ARMOR successfully provided germicidal radiation to all areas of the mask and will inactivate SARS-CoV-2 in approximately 180 s, H1N1 Influenza in 130 s, and Mycobacterium tuberculosis in 113 s, proving that this design is effective at eliminating a variety of pathogens and can serve as an alternative to traditional waste-producing disposable face masks. The accessibility, ease of use, and speed of sanitization supports the wide application of ARMOR in both clinical and public settings.

Highly Sensitive Hybrid Nanostructures for Dimethyl Methyl Phosphonate Detection

Nanostructured materials synthesized by the hydrothermal and thermal reduction process were tested to detect the dimethyl methylphosphonate (DMMP) as a simulant for chemical warfare agents. Manganese oxide nitrogen-doped graphene oxide with polypyrrole (MnO2@NGO/PPy) exhibited the sensitivity of 51 Hz for 25 ppm of DMMP and showed the selectivity of 1.26 Hz/ppm. Nitrogen-doped multi-walled carbon nanotube (N-MWCNT) demonstrated good linearity with a correlation coefficient of 0.997. A comparison between a surface acoustic wave and quartz crystal microbalance sensor exhibited more than 100-times higher sensitivity of SAW sensor than QCM sensor.