Synthesis of Novel Reactive Disperse Silicon-Containing Dyes and Their Coloring Properties on Silicone Rubbers

Synergistic Effect of Aluminum Nitride and Carbon Nanotube-Reinforced Silicon Rubber Nanocomposites

Constructing a synergistic effect with different structural fillers is an important strategy for improving the comprehensive properties of polymeric composites. To improve the comprehensive properties of two-component additive liquid silicon rubber (SR) materials used in electronics packaging, the synergistic effect of granular aluminum nitride (AlN) and tubular carbon nanotube (CNT)-reinforced SR nanocomposites was investigated. AlN/CNT/SR composites with different AlN/CNT ratios were fabricated with two-component additive liquid SR via the thermal curing technique, and the influence of AlN/CNT hybrid fillers on the hardness, strength, elongation at break, surface resistivity, thermal conductivity, and thermal decomposition was investigated in detail. With the incorporation of AlN/CNT hybrid fillers, the comprehensive properties of the obtained AlN/CNT/SR composites are better than those of the AlN/SR and CNT/SR composites. The synergistic thermal conductive mechanism of AlN/CNT hybrid fillers was proposed and demonstrated with the fractural surface morphology of the obtained composites. The obtained AlN/CNT/SR composites show promising applications in electronic packaging, where necessary mechanical strength, electrical insulating, thermal conductivity, and thermal stable materials are needed.

Electrospinning Novel Sodium Alginate/MXene Nanofiber Membranes for Effective Adsorption of Methylene Blue

Understanding how to develop highly efficient and robust adsorbents for the removal of organic dyes in wastewater is crucial in the face of the rapid development of industrialization. Herein, d-Ti₃C₂T_x nanosheets (MXene) were combined with sodium alginate (SA), followed by electrospinning and successive Ca²⁺-mediated crosslinking, giving rise to a series of SA/MXene nanofiber membranes (NMs). The effects of the MXene content of the NMs on the adsorption performance for methylene blue (MB) were investigated systemically. Under the optimum MXene content of 0.74 wt.%, SA/MXene NMs possessed an MB adsorption capacity of 440 mg/g, which is much higher than SA/MXene beads with the same MXene content, pristine MXene, or electrospinning SA NMs. Furthermore, the optimum SA/MXene NMs showed excellent reusability. After the adsorbent was reused ten times, both the MB adsorption capacity and removal rate could remain at 95% of the levels found in the fresh samples, which indicates that the electrospinning technique has great potential for developing biomass-based adsorbents with high efficiency.

Dyeing Method and Properties of a Novel Blue Azo-Anthraquinone Reactive Dye on Cotton

A novel blue azo-anthraquinone reactive dye was evaluated in the dyeing of cotton by using a dip–pad–steam process. Dyeing method and properties were examined in detail and the results showed that the dyeing method consisting of dye concentration of 25 g/L, sodium carbonate of 12 g/L, dipping time of 3 min and steaming time of 30 min was the most effective when a conventional “one-dip–one-nip” process was used. The fixation of the dyes on cotton could reach up to 93.4%, the wash and rub fastness both reached grade 4 above, and the light fastness reached grade 4–5 above. Such colored cotton showed very close colorimetric properties.