A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc

Eco-friendly Fluorescent Sensor for Sensitive and Selective Detection of Zn2+ and Fe3+ Ions: Applications in Human Hair Samples

A new eco-friendly sensor, 3-((6-((4-chlorobenzylidene)amino)pyridin-2-yl)imino)indolin-2-one (CBAPI) was synthesized and well characterized. The CBAPI sensor was employed for detecting Zn2+ and Fe3+ ions. It exhibited a low limit of detection at pH 6.0, with values of 2.90, for Zn2+ and 3.59 nmol L-1 for Fe3+ ions. The sensor demonstrated high selectivity over other interfering cations. Additionally, the high binding constants reflect the great affinity of sensor towards Zn2+ and Fe3+ ions. To further validate its quantification ability for Zn2+ ions, the synthesized CBAPI sensor was used to determine Zn levels in human hair samples, and the results were confirmed using atomic absorption spectroscopy (AAS). The AGREE metric tool was used to assess the method's environmental impact and practical applicability. These positive outcomes indicated that the new method for detecting Zn2+ and Fe3+ ions is environmentally friendly and safe for humans. The developed CBAPI sensor represents a potential development in metal ion detection, combining sensitivity, selectivity, and rapidity.

Advancements in the development of fluorescent chemosensors based on CN bond isomerization/modulation mechanistic approaches

The CN bond isomerization/modulation as a fluorescence signalling mechanism was explored by studying the photophysical properties of conformationally restricted molecules. From the beginning, the CN bond isomerization method has attracted the attention of researchers owing to its simplicity, high selectivity, and sensitivity in fluorescence evaluation. Continuous developments in the field of sensing using CN bond-containing compounds have been achieved via the customization of the isomerization process around the CN bond in numerous ways, and the results were obtained in the form of specific discrete photophysical changes. CN isomerization causes significant fluorescence enhancement in response to detected metal cations and other reactive species (Cys, Hys, ClO-, etc.) straightforwardly and effectively. This review sheds light on the process of CN bond isomerization/modulation as a signalling mechanism depending on fluorescence changes via conformational restriction. In addition, CN bond isomerization-based fluorescent sensors have yet to be well reviewed, although several fluorescent sensors based on this signalling mechanism have been reported. Therefore, CN-based fluorescent sensors are summarized in this review.

Zinc-Induced Luminescent l-Valine-Based Pseudopeptidic Soft Bioinspired Materials for Precise Tuning of Nanoassembly

Pseudopeptide-based bioinspired materials are emerging for selective recognition of biologically significant analytes and are applicable in the modern nanoscience field. Therefore, we have developed novel multifunctional C2-symmetric soft pseudopeptides by amino acid l-valine and salicylaldehyde fragments using a series of aliphatic linkers. They are highly selective and sensitive to Zn (II) ions under physiological conditions and reveal significant fluorescence enhancement with the PET mechanism. The molecular self-assembly shows zinc-induced morphological transformation of the rod-shaped assembly into a chain-like morphology. Such a metal-induced hierarchical nano-assembly may have relevance for specific nanobiotechnology applications.

A very rare fluorescent chemosensor of zinc(II) exhibiting AIEE, ESIPT and TICT: Spectroscopic, crystallographic and theoretical exploration

The basic systems in this study are HL (1; 1:2 condensation product of 2,6-diformyl-4-ethylphenol and o-anisidine) and its ZnII and CdII complexes of composition [ZnII(LH)Cl2]·CH3OH (2) and [CdII(LH)Cl2] (3), all of which are synthesized and characterized by CHN elemental analyses, single crystal X-ray crystallography, powder X-ray diffraction (PXRD) and fourier transform infrared (FT-IR) spectrum. It has been established from the following experimental and theoretical studies that 1 is a fluorescent turn on sensor of ZnII ion and it exhibits all of excited state intramolecular proton transfer (ESIPT), photoinduced electron transfer (PET), twisted intramolecular charge transfer (TICT) and aggregation induced enhanced emission (AIEE): (i) Detailed absorption and emission (steady state / time resolved) studies in various single solvents, in solvent mixtures, with pH variation, with various single metal ions, with mixtures of metal ions, on varying temperature and on varying viscosity; (ii) dynamic light scattering (DLS) and scanning electron microscopy (SEM) in solvent mixtures; (iii) density functional theory (DFT) and time dependent density functional theory (TD-DFT) calculations in ground and excites states of 1-3. It is shown that 1 can be efficaciously applied in inkless writing with the "write - erase - write" facility. The mechanisms/reasons of the observed properties have been addressed. The difference in fluorescence of ZnII and CdII complexes, unusual case of crystal structures of probe and complexes with ZnII and CdII, unusual features in the structures of 2 and 3 as well as a structure-property correlation have been discussed.

L-Phenylalanine-derived pseudopeptidic bioinspired materials: Zn(II) induced fluorescence enhancement and precise tuning of self-assembled nanostructures

The pseudopeptide, owing to its intriguing, sustainable, and easily accessible multifunctional properties, has attracted significant research interest over the years. C2-symmetric pseudopeptidic chiral bioinspired materials have been developed for their selective sensitivity to Zn(II) ions via a turn-on fluorescence under physiological conditions. Moreover, these are promising soft materials for precisely tuning their self-assembled nanostructures after incubating with Zn(II), opening avenues for exploring similar effects in various peptidomimetics.

Benzil Bis-Hydrazone Based Fluorescence 'Turn-on' Sensor for Highly Sensitive and Selective Detection of Zn(II) Ions

In this study, a novel Benzil Bis-Hydrazone (BBH) sensor with two C = N-N = C moieties was designed and synthesized based on the condensation reaction between benzil-dihydrazone (b) and cinnamaldehyde. The BBH probe in dimethylsulfoxide showed extremely weak fluorescence. However, the same solution exhibited an intensive fluorescence enhancement (152-fold) with the introduction of Zn(II) ions. In contrast, no or negligible fluorescence changes were observed when other ions were added. The fluorogenic behavior of BBH towards the examined cations indicated an excellent selectivity of the BBH sensor for Zn(II) cations without any interference from other cations like Fe(II), Mg(II), Cu(II), Co(II), Mn(II), Cr(III), Hg(II), Sn(II), Al(I), La(III), Ca(II), Ba(II), Na(I), K(I), and especially Cd(II). Moreover, the UV-vis spectrophotometric titrations revealed that a 1:1 stoichiometric complex BBH-Zn(II) was formed during the Zn(II) sensing and the binding constant value for this complex was calculated to be equal to 106.8. Further, in order to show the affinity of the BBH sensor for Zn(II) cations, it was deemed necessary to determine the limit of detection (LOD) which was found to equal to 2.5 10-4 M.

AIE -active TPA modified Schiff base for successive sensing of Cu2+ and His via an on-off-on method and its application in bioimaging

In this article, a novel triphenylamine-modified salicylaldehyde Schiff base 2-(((4-(diphenylamino)phenyl)imino)methyl)-4-(pyridine-4-yl)phenol (HL) was synthesized and structurally characterized. HL possessed D-π-A structure and exhibited typical AIE property in THF/H₂O. It was applied to selectively recognize Cu²⁺ through an on-off mode in THF/H₂O (1/9, v/v), and the fluorescence attenuation was attributed to a paramagnetic quenching effect of Cu²⁺ together with the abatement of HL aggregates. Hence, the detection limit achieved was as low as 1.32 × 10^-7 M. The spectroscopic and ESI-HRMS results revealed a 1 : 2 complexation ratio of Cu²⁺ with HL. The mechanism for sensing Cu²⁺ was further confirmed by performing DFT calculations. Owing to the large affinity between Cu²⁺ and His, the resultant CuL2 system was further used to detect His via the off-on method based on the displacement of ligands. The detection limit for His reached 5.14 × 10^-8 M. Furthermore, HL was available to prepare handy indicator papers for the on-site recognition of Cu²⁺ and His. Confocal fluorescent imaging demonstrated that HL could sequentially respond to intracellular Cu²⁺ and His.

Crystal structure of N 2,N 6-bis(2-(((E)-quinolin-8-ylmethylene)amino)phenyl)pyridine-2,6-dicarboxamide, C39H27N7O2

C39H27N7O2, monoclinic, P21/c (no. 14), a = 12.3871(18) Å, b = 19.114(3) Å, c = 13.2430(16) Å, β = 103.236(4)°, V = 3052.3(7) Å3, Z = 4, R gt(F) = 0.0516, wR ref(F 2) = 0.1313, T = 293(2) K.

Sign control of circularly polarized luminescence of chiral Schiff-base Zn(II) complexes through coordination geometry changes

The handedness of circularly polarized luminescence (CPL) of Zn(II) complexes with a chiral Schiff-base ligand can be controlled by coordination geometry changes in solution and in the solid state. The relationships between molecular structure and chiroptical properties were discussed with the results of X-ray diffraction analysis and DFT calculations.