Preparation and Electrochemical Performance of Three-Dimensional Vertically Aligned Graphene by Unidirectional Freezing Method

Depletion Strategies for Crystallized Layers of Two-Dimensional Nanosheets to Enhance Lithium-Ion Conductivity in Polymer Nanocomposites

The assembly of long-range aligned structures of two-dimensional nanosheets (2DNSs) in polymer nanocomposites (PNCs) is in urgent need for the design of nanoelectronics and lightweight energy-storage materials of high conductivity for electricity or heat. These 2DNS are thin and exhibit thermal fluctuations, leading to an intricate interplay with polymers in which entropic effects can be exploited to facilitate a range of different assemblies. In molecular dynamics simulations of experimentally studied 2DNSs, we show that the layer-forming crystallization of 2DNSs is programmable by regulating the strengths and ranges of polymer-induced entropic depletion attractions between pairs of 2DNSs, as well as between single 2DNSs and a substrate surface, by exclusively tuning the temperature and size of the 2DNS. Enhancing the temperature supports the 2DNS-substrate depletion rather than crystallization of 2DNSs in the bulk, leading to crystallized layers of 2DNSs on the substrate surfaces. On the other hand, the interaction range of the 2DNS-2DNS depletion attraction extends further than the 2DNS-substrate attraction whenever the 2DNS size is well above the correlation length of the polymers, which results in a nonmonotonic dependence of the crystallization layer on the 2DNS size. It is demonstrated that the depletion-tuned crystallization layers of 2DNSs contribute to a conductive channel in which individual lithium ions (Li ions) migrate efficiently through the PNCs. This work provides statistical and dynamical insights into the balance between the 2DNS-2DNS and 2DNS-substrate depletion interactions in polymer-2DNS composites and highlights the possibilities to exploit depletion strategies in order to engineer crystallization processes of 2DNSs and thus to control electrical conductivity.

Controllable chiral inversion via thioether bond-activated J- and H-aggregation transformation

Herein, thioether bonds in the peripheral groups of chiral dendrimer that could activate the transformation between J- and H-aggregation in π-systems and caused controllable chiral inversion are described. Furthermore, owing to the close-knit per-aggregation of dendrimers impeding the transfer of inherent molecular chirality, the inversed chirality could be memorized and transferred from oligomers to nano-helices during self-assembly.

Exploring 2D Energy Storage Materials: Advances in Structure, Synthesis, Optimization Strategies, and Applications for Monovalent and Multivalent Metal-Ion Hybrid Capacitors

The design and development of advanced energy storage devices with good energy/power densities and remarkable cycle life has long been a research hotspot. Metal-ion hybrid capacitors (MHCs) are considered as emerging and highly prospective candidates deriving from the integrated merits of metal-ion batteries with high energy density and supercapacitors with excellent power output and cycling stability. The realization of high-performance MHCs needs to conquer the inevitable imbalance in reaction kinetics between anode and cathode with different energy storage mechanisms. Featured by large specific surface area, short ion diffusion distance, ameliorated in-plane charge transport kinetics, and tunable surface and/or interlayer structures, 2D nanomaterials provide a promising platform for manufacturing battery-type electrodes with improved rate capability and capacitor-type electrodes with high capacity. In this article, the fundamental science of 2D nanomaterials and MHCs is first presented in detail, and then the performance optimization strategies from electrodes and electrolytes of MHCs are summarized. Next, the most recent progress in the application of 2D nanomaterials in monovalent and multivalent MHCs is dealt with. Furthermore, the energy storage mechanism of 2D electrode materials is deeply explored by advanced characterization techniques. Finally, the opportunities and challenges of 2D nanomaterials-based MHCs are prospected.

Magnetic CuFe2O4 Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage

This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe₂O₄ nanoparticles in negative potential range are reported, suggesting that CuFe₂O₄ is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm^-2 is achieved at a low electrode resistance in a relatively large potential window of 0.8 V. The cyclic voltammograms and galvanostatic charge-discharge data show nearly ideal pseudocapacitive behavior. Good electrochemical performance is achieved at a high active mass loading due to the use of chelating molecules of ammonium salt of purpuric acid (ASPA) as a co-dispersant for CuFe₂O₄ nanoparticles and conductive multiwalled carbon nanotube (MCNT) additives. The adsorption of ASPA on different materials is linked to structural features of ASPA, which allows for different interaction and adsorption mechanisms. The combination of advanced magnetic and pseudocapacitive properties in a negative potential range in a single MOPC material provides a platform for various effects related to the influence of pseudocapacitive/magnetic properties on magnetic/pseudocapacitive behavior.

Application of Rhamnolipids as Dispersing Agents for the Fabrication of Composite MnO2-Carbon Nanotube Electrodes for Supercapacitors

The high theoretical capacitance of MnO2 renders it a promising material for the cathodes of asymmetric supercapacitors. The good dispersion of MnO2 and conductive additives in a nanocomposite electrode is a key factor for efficient electrode performance. This article describes, for the first time, the application of rhamnolipids (RL) as efficient natural biosurfactants for the fabrication of nanocomposite MnO2-carbon nanotube electrodes for supercapacitors. RL act as co-dispersants for MnO2 and carbon nanotubes and facilitate their efficient mixing, which allows for advanced capacitive properties at an active mass of 40 mg cm-2 in Na2SO4 electrolytes. The highest capacitance obtained from the cyclic voltammetry data at a scan rate of 2 mV s-1 is 8.10 F cm-2 (202.6 F g-1). The highest capacitance obtained from the galvanostatic charge-discharge data at a current density of 3 mA cm-2 is 8.65 F cm-2 (216.16 F g-1). The obtained capacitances are higher than the capacitances of MnO2-based electrodes of the same active mass reported in the literature. The approach developed in this investigation is simple compared to other techniques used for the fabrication of electrodes with high active mass. It offers advantages of using a biocompatible RL biosurfactant.