Stability and Removal of Benzophenone-Type UV Filters from Water Matrices by Advanced Oxidation Processes

Hydrophobic eutectic solvents for surface water treatment with a focus on benzophenone type UV filters

Effective removal of organic UV filters from aquatic environmental compartments and swimming waters is very important because these substances are hazardous to humans and wildlife at low concentrations and act as endocrine disruptors. Therefore, the aim of the present article is to determine the extraction efficiencies of hydrophobic deep eutectic solvents (HDES) for the selected UV filters based on benzophenone structure (benzophenone, 2,4-dihydroxybenzophenone, 2,2´,4,4´-tetrahydroxybenzophenone, 2-hydroxy-4-methoxybenzophenone, 2,2´-dihydroxy-4-methoxybenzophenone, 4-methacryloxy-2-hydroxybenzophenone) from aqueous matrices. For this purpose, six HDESs based on dl-menthol in combination with caprylic, decanoic and lauric acid are prepared and compared with referent terpene solvents such as terpineol and linalool. The effect of various parameters such as HDES composition, volume ratio, frequency and shaking time are studied. The highest extraction efficiency is shown by HDES of menthol:caprylic acid (1:1) composition at the aqueous:organic phase volume ratio of 1:1, shaking frequency of 1500 rpm and shaking time of 15 min. The achieved extraction efficiencies are higher than 99.6 % for all benzophenones studied in the purification of stagnant pond water, swimming pool water and river water samples. After a simple and fast sample treatment, the residual levels of benzophenones in the waters are controlled by a newly developed sensitive HPLC-MS/MS method with LOQs in the range of 0.7 - 5.0 ng/mL.

Removal of benzophenone-4 via chlorination and advanced oxidation processes in aqueous solution: kinetics, by-product identification, and mechanistic studies

Benzophenone-4 (BP-4) is one of the UV filters widely used in personal care products (PCPs). BP-4 has been identified as an emergent contaminant detected in influent and effluent of wastewater treatment plants (WWTPs) at high concentrations showing that conventional treatment is unable to remove it, subsequently, the presence of BP-4 in surface water is inevitable. In this study, we focus on the degradation of this compound by chlorine, and we report the efficiency of its removal from water by applying two advanced oxidation processes UV/TiO2 and UV/H2O2 aiming to achieve a superior mineralization result. The study was performed in purified water (pH = 6.5, temperature = 25 °C) with an initial concentration of BP-4 similar to that detected in WWTPs (10 mg/L). The results showed that 76% of BP-4 was degraded after 80 min of reaction with chlorine leading to the formation of one by-product persistent in the solution. The oxidation by UV/TiO2 and UV/H2O2 led to a total removal of BP-4 and their generated by-products after 50 and 10 min of reactions, respectively. The kinetic study showed that BP-4 degradation by UV/H2O2 and UV/TiO2 followed pseudo-first-order reaction kinetics and the apparent rate constants (kapp) were determined to be 0.48 min-1 and 0.08 min-1, respectively. The degradation of BP-4 by chlorine followed first-order reaction kinetics with kapp = 0.02 min-1. The identification of by-product structures was performed using liquid chromatography with electrospray ionization and tandem mass spectrometry (MS/MS. The fragmentation of BP-4 and by-product ions at different collision energies allowed to propose the pathways of degradation and to predict the toxicity using a silico toxicity program which confirmed a higher toxicity of all generated by-products.

Unveiling the toxic effects, physiological responses and molecular mechanisms of tobacco (Nicotiana tabacum) in exposure to organic ultraviolet filters

Exposure to organic ultraviolet (UV) filters has raised concerns due to their potential adverse effects on environments. However, their toxic mechanisms on plants remain elusive. In this study, using integrative physiological and transcriptomic approaches we investigated the physiological and molecular responses to three representative UV filters, namely oxybenzone (OBZ), avobenzone (AVB), and octinoxate (OMC), in an agricultural model plant tobacco. The exposure to UV filters disrupts the functionality of photosystem reaction centers and the light-harvesting apparatus. Concurrently, UV filters exert a suppressive effect on the expression of genes encoding Rubisco and Calvin-Benson cycle enzymes, resulting in a decreased efficiency of the Calvin-Benson cycle and consequently hampering the process of photosynthesis. Exposure to UV filters leads to significant generation of reactive oxygen species within tobacco leaves and downregulation of oxidoreductase activities. Moreover, UV filters promote abscisic acid (ABA) accumulation by inducing the expression of ABA biosynthesis genes whereas repress indole-3-acetic acid (IAA) biosynthesis gene expression, which induce leaf yellowing and slow plant growth. In summary, the organic UV filters exert toxic effects on tobacco growth by inhibiting chlorophyll synthesis, photosynthesis, and the Calvin-Benson cycle, while generating excessive reactive oxygen species. This study sheds light on the toxic and tolerance mechanisms of UV filters in agricultural crops.

Comparison of benzotriazole ultraviolet stabilizers (BUVs) removal from wastewater after subsequent stages of sequencing batch reactor (SBR) treatment process

The research focused on benzotriazole ultraviolet stabilizers (BUVs) which are commonly used compounds despite being found dangerous, e.g. promoting breast cancer cell proliferation, damaging vital organs such as hearts, brains livers and kidneys. The aim of the study was to analyse the efficiency and removal rate of BUVs from wastewater depending on the quantity of tested compounds and SBR anaerobic-aerobic conditions. The study was conducted in sequencing batch reactors (SBRs - 17 L) with real flocculent activated sludge (8 L) and model wastewater (5 L) containing UV-326, UV-327, UV-328, UV-329 and UV-P from 50 to 600 μg∙L-1. The SBR were operated in 390 cycles of 7 h and 10 min over 130 days. The similarity of the technological parameters of the treatment process to those used in a real wastewater treatment plant was maintained. Efficiency removal of individual BUVs was strictly dependent on the dose of compounds introduced into wastewater and ranged from 68.2 to 97 %. Removal of UV-329 occurred with lowest efficiency (from 68.2 to 85.2 %) while UV-326 was most efficiently removed from the wastewater (from 94.1 to 97 %). UV-329 was removed from wastewater with the lowest (0.0968-0.9524 μg∙L-1∙min-1) average removal rate while UV-327 with the highest (0.16-1.3357 μg∙L-1∙min-1), irrespective of BUVs dose in the influent. Secondary release of BUVs into the wastewater occurred in SBR during the settling phase and was dependent on the type and concentration of the BUVs in the raw wastewater. This occurrence was noted for UV-326 ≥ 100; UV-327 = 600; UV-328 ≥ 200; UV-329 ≥ 50 and UV-P ≥ 100 μg∙L-1. The settling phase needs to be shortened to the required minimum. This is an important conclusion for WWTPs in regards to SBR cycle duration and technological parameters of the treatment process.

Lymnaea stagnalis and Ophryotrocha diadema as Model Organisms for Studying Genotoxicological and Physiological Effects of Benzophenone-3

Benzophenone-3 (BP-3) is a lipophilic organic compound that occurs naturally in flower pigments. Since it adsorbs ultraviolet (UV) radiation in the UVA and UVB regions, it is one of the most common UV filters found in sunscreen and cosmetic products. We explored by in vivo micronuclei (MNi) assay the genotoxic effects of BP-3 on hemocytes from the freshwater gastropod Lymnaea stagnalis. We also studied its possible toxic effects on life-history traits: body growth in L. stagnalis and egg production of both L. stagnalis and the marine polychaete worm Ophryotrocha diadema. Adult individuals were exposed to increasing concentrations of BP-3 (0.025, 0.050, 0.100, and 0.200 mg/L) once a week for 4 weeks. In L. stagnalis, exposure to BP-3 at concentrations of both 0.2 and 0.1 mg/L produced genotoxic effects on the micronuclei frequencies, but only concentrations of 0.2 mg/L affected the NBUDs frequencies. Similarly, negative effects on body growth were observed at the concentrations of 0.2 and 0.1 mg/L and a significant reduction of egg production at 0.2 mg/L. In O. diadema, a negative correlation between egg production and increasing BP-3 concentrations was observed. Our findings suggest the need for more stringent measures to reduce the presence of BP-3 in the environment.

Response Surface Methodology (RSM) modelling for the photocatalytic optimization study of benzophenone removal using CuWO4/NiO nanocomposite

Emerging contaminants are posing a new water quality challenge, worldwide. The majority of pharmaceutical and personal care products used by us have been regarded as emerging contaminants. Benzophenone is one such chemical found in personal care products, specially in sunscreen creams as an UV-filter. Copper tungstate/nickel oxide (CuWO4/NiO) nanocomposite with visible (LED) light irradiation has been investigated in degradation of benzophenone, in the present study. The co-precipitation approach was used to produce the aforementioned nanocomposite. XRD, FTIR, FESEM, EDX, Zeta potential, and UV-Vis spectroscopy illustrated the structure, morphology, and other catalytic features. Response surface methodology (RSM) was used to optimize and simulate the photodegradation of benzophenone. Herein, catalyst dose, pH, initial pollutant concentration, and contact time were considered as the independent factor in the design of experiment (DoE) using RSM with percentage degradation as the dependent factor or as a response. The CuWO4/NiO nanocomposite demonstrated high photocatalytic performance of 91.93% at pH = 11 with a pollutant concentration of 0.5 mg/L and a catalyst dose of 5 mg within 8 h under ideal circumstances. The RSM model was determined to be the most convincible with an R2 value of 0.99 and a probability value (P-value) of 0.0033, respectively, with a agreeable projected and actual values. As a result, it is envisioned that this study may provide new avenue for developing a strategy to target such emerging contaminants.

Elnosary M, L. Ashour M, M. Abd El-Moneam N, A. Shreadah M. Flavonoids Biosynthesis in Plants as a Defense Mechanism: Role and Function Concerning Pharmacodynamics and Pharmacokinetic Properties

Flavonoids are a major class of secondary metabolites that comprises more than 6000 compounds that have been identified. They are biosynthesized via the phenylpropanoid metabolic pathway that involves groups of enzymes such as isomerases, hydroxylases, and reductases that greatly affect the determination of the flavonoid skeleton. For example, transferase enzymes responsible for the modification of sugar result in changes in the physiological activity of the flavonoids and changes in their physical properties, such as solubility, reactivity, and interaction with cellular target molecules, which affect their pharmacodynamics and pharmacokinetic properties. In addition, flavonoids have diverse biological activities such as antioxidants, anticancer, and antiviral in managing Alzheimer’s disease. However, most marine flavonoids are still incompletely discovered because marine flavonoid biosynthesis is produced and possesses unique substitutions that are not commonly found in terrestrial bioactive compounds. The current chapter will illustrate the importance of flavonoids’ role in metabolism and the main difference between marine and terrestrial flavonoids.

Short-term effects of an environmentally relevant concentration of organic UV filters on signal crayfish Pacifastacus leniusculus

Personal care products, including organic UV filters, are considered emerging contaminants, with their toxic effects being a concern in recent decades. UV filters continually enter surface waters via wastewater and human activity. Despite the presence of organic UV filters in the freshwater environment, little is known of their impact on aquatic biota. In this study, we evaluated the cardiac and locomotor responses of signal crayfish Pacifastacus leniusculus exposed to environmentally relevant concentrations of either 2-Phenylbenzimidazole-5-sulfonic acid (PBSA, 3 µg/L) or 5-Benzoyl-4-hydroxy-2-methoxybenzenesulfonic acid (BP4, 2.5 µg/L). Specimens exposed to the tested compounds for 30 min exhibited significantly greater changes in distance moved and time active than did unexposed controls. Significant differences of mean heart rate change compared to control were detected in both PBSA and BP4 experimental groups. Such behavior and physiological alterations demonstrate ecological effects of personal care products with the tested sunscreen compounds even with a short exposure. Evidence of the consequences of organic UV filters on aquatic organisms is scarce and is an important topic for future research.

Beach showers as sources of contamination for sunscreen pollution in marine protected areas and areas of intensive beach tourism in Hawaii, USA

In 2019, sands in nearby runoff streams from public beach showers were sampled on three islands in the State of Hawaii and tested for over 18 different petrochemical UV filters. Beach sands that are directly in the plume discharge of beach showers on three of the islands of Hawaii (Maui, Oahu, Hawai'i) were found to be contaminated with a wide array of petrochemical-based UV-filters that are found in sunscreens. Sands from beach showers across all three islands had a mean concentration of 5619 ng/g of oxybenzone with the highest concentration of 34,518 ng/g of oxybenzone at a beach shower in the Waikiki area of Honolulu. Octocrylene was detected at a majority of the beach shower locations, with a mean concentration of 296.3 ng/g across 13 sampling sites with the highest concentration of 1075 ng/g at the beach shower in Waikiki. Avobenzone, octinoxate, 4-methylbenzylidene camphor and benzophenone-2 were detected, as well as breakdown products of oxybenzone, including benzophenone-1, 2,2'-dihydroxy-4-methoxybenzophenone, and 4-hydroxybenzophenone. Dioxybenzone (DHMB) presented the highest concentration in water (75.4 ng/mL), whereas octocrylene was detected in all water samples. Some of these same target analytes were detected in water samples on coral reefs that are adjacent to the beach showers. Risk assessments for both sand and water samples at a majority of the sampling sites had a Risk Quotient > 1, indicating that these chemicals could pose a serious threat to beach zones and coral reef habitats. There are almost a dozen mitigation options that could be employed to quickly reduce contaminant loads associated with discharges from these beach showers, like those currently being employed (post-study sampling and analysis) in the State of Hawaii, including banning the use of sunscreens using petrochemical-based UV filters or educating tourists before they arrive on the beach.

Mechanism of One-Step Hydrothermally Synthesized Titanate Catalysts for Ozonation

A titanate nanotube catalyst for ozonation was synthesized with a simple one-step NaOH hydrothermal treatment without energy-consuming calcination. The synthesized titania catalysts were characterized by X-ray diffraction (XRD), Raman, porosimetry analysis, high-resolution transmission electron microscopy (HR-TEM), Fourier transformed infrared (FTIR), and electron paramagnetic resonance (EPR) analysis. The catalyst treated with a higher concentration of NaOH was found to be more catalytically active for phenol removal due to its higher titanate content that would facilitate more OH groups on its surface. Furthermore, the main active oxidizing species of the catalytic ozonation process were recognized as singlet oxygen and superoxide radical, while the hydroxyl radical may only play a minor role. This work provides further support for the correlation between the properties of titania and catalytic performance, which is significant for understanding the mechanism of catalytic ozonation with titania-based materials.