The Effects of pH and Excipients on Exenatide Stability in Solution

FRAP analysis of peptide diffusion in extracellular matrix mimetic hydrogels as an in vitro model for subcutaneous injection

Subcutaneous (SC) injection is a common route of administration for drug compounds with poor oral bioavailability. However, bioavailability is often variable and incomplete, and there is as yet no standard accepted medium for simulation of the human SC environment. In this work we evaluate a FRAP based method for quantitative determination of local self-diffusion coefficients within extracellular matrix (ECM) mimetic hydrogels, potentially useful as in vitro models for drug transport in the ECM after SC injection. Gels were made consisting of either agarose, cross-linked collagen (COL) and hyaluronic acid (HA) or cross-linked HA. The diffusivities of uncharged FITC-dextran (FD4), the highly charged poly-lysine (PLK20) and poly-glutamic acid (PLE20) as well as the GLP-1 analogue exenatide were determined within the gels using FRAP. The diffusion coefficients in uncharged agarose gels were in the range of free diffusion in PBS. The diffusivity of cationic PLK20 in gels containing anionic HA was substantially decreased due to strong electrostatic interactions. Peptide aggregation could be observed as immobile fractions in experiments with exenatide. We conclude that the FRAP method provides useful information of peptides' interactions and transport properties in hydrogel networks, giving insight into the mechanisms affecting absorption of drug compounds after subcutaneous injection.

Development and validation of stability-indicating assay method and identification of force degradation products of glucagon-like peptide-1 synthetic analog Exenatide using liquid chromatography coupled with Orbitrap mass spectrometer

Exenatide is a synthetic glucagon-like peptide 1 analog, widely used in the management of type 2 diabetes mellitus. The stability of pharmaceutical products is significantly impacted by various environmental stress conditions. The present study reports the development of a validated reverse-phase high-performance liquid chromatography (RP-HPLC) stability-indicating method for the identification of force degradation products (DPs) of synthetic glucagon-like peptide-1 analog Exenatide using UHPLC-Orbitrap fusionTM mass spectrometer. Force degradation studies were performed by subjecting Exenatide to various stress conditions, such as hydrolytic, oxidative, photolytic and thermal to investigate the stability indicating ability of the method. Significant degradation was observed during acidic, oxidative, photolytic and thermal stress conditions. Exenatide and its major DPs identification and characterization were demonstrated by employing LC-HRMS and MS/MS method. In total, five major stress DPs were characterized, and their fragmentation pathway was proposed using MS/MS studies. Finally, the proposed RP-HPLC method was validated as per ICH guidance.

Peptide Acylation in Aliphatic Polyesters: a Review of Mechanisms and Inhibition Strategies

Biodegradable polyesters are widely employed in the development of controlled release systems for peptide drugs. However, one of the challenges in developing a polyester-based delivery system for peptides is the acylation reaction between peptides and polymers. Peptide acylation is an important factor that affects formulation stability and can occur during storage, in vitro release, and after drug administration. This review focuses on the mechanisms and parameters that influence the rate of peptide acylation within polyesters. Furthermore, it discusses reported strategies to minimize the acylation reaction.

Design of experiments approach for the development of a validated method to determine the exenatide content in poly(lactide-co-glycolide) microspheres

Due to the lack of pharmacopeia guidelines for injectable microspheres based on poly (D, L-lactide-co-glycolide) (PLGA), an internal method validation is a critical prerequisite for quality assurance. One of the essential issues of developing peptide-based drugs loaded PLGA microspheres is the precise determination of the amount of peptide drug entrapped in the microspheres. The aim of this study is the development and optimization of a method for measuring the drug content loading of PLGA microspheres using exenatide as a model peptide drug. Exenatide-loaded PLGA microspheres were prepared by a double emulsion solvent evaporation method. The extraction method to determine exenatide content in microspheres was optimized using Design of Experiments (DoE) approach. After the initial screening of six factors, using Fractional Factorial design (FFD), four of them, including type of organic solvent, buffer/organic solvent ratio (v/v), shaking time and pH, exhibited significant effects on the response, namely the exenatide loading, and a Box-Behnken design (BBD) was subsequently applied to obtain its optimum level. The optimum level for organic solvent volume, buffer/organic solvent ratio, shaking time, and pH were 4 ml, 1, 5.6 hrs, and pH 6, respectively. The exenatide content in microspheres under these conditions was 6.4 ± 0.0 (%w/w), whereas a value of 6.1% was predicted by the derived equation. This excellent agreement between the actual and the predicted value demonstrates that the fitted model can thus be used to determine the exenatide content.

In vitro performance of composition-equivalent PLGA microspheres encapsulating exenatide acetate by solvent evaporation

The once-weekly Bydureon® (Bdn) PLGA microsphere formulation encapsulating the GLP-1 receptor agonist, exenatide acetate, is an important complex injectable product prepared by coacervation for the treatment of type 2 diabetic patients. Encapsulation by coacervation is useful to minimize an undesirable initial burst of exenatide, but it suffers from manufacturing difficulties such as process scale-up and batch-to-batch variations. Herein we prepared exenatide acetate-PLGA formulations of similar compositions using the desirable alternative double emulsion-solvent evaporation technique. After screening several process variables, we varied the PLGA concentration, the hardening temperature, and the collected particle size range, and determined the resulting drug and sucrose loading, initial burst release, in vitro retention kinetics, and peptide degradation profiles using Bdn as a positive control. All formulations exhibited a triphasic release profile with a burst, lag, and rapid release phase, although the burst release was greatly decreased to <5% for some. Marked differences were observed in the peptide degradation profiles, particularly the oxidized and acylated fractions, when the polymer concentration was varied. For one optimal formulation, the release and peptide degradation profiles were similar to Bdn microspheres, albeit with an induction time shift of one week, likely due to the slightly higher Mw of PLGA in Bdn. These results highlight the effects of key manufacturing variables on drug release and stability in composition-equivalent microspheres encapsulating exenatide acetate and indicate the potential of manufacturing the microsphere component of Bdn by solvent evaporation.

Metabolism and Chemical Degradation of New Antidiabetic Drugs: A Review of Analytical Approaches for Analysis of Glutides and Gliflozins

The drug metabolism and drug degradation pathways may overlap, resulting in the formation of similar constituents. Therefore, the metabolism data can be helpful for deriving safe levels of degradation impurities and improving the quality of respective pharmaceutical products. The present article contains considerations on possible links between metabolic and degradation pathways for new antidiabetic drugs such as glutides, gliflozins, and gliptins. Special attention was paid to their reported metabolites and identified degradation products. At the same time, many interesting analytical approaches to conducting metabolism as well as degradation experiments were mentioned, including chromatographic methods and radioactive labeling of the drugs. The review addresses the analytical approaches elaborated for examining the metabolism and degradation pathways of glutides, i.e., glucagon like peptide 1 (GLP-1) receptor agonists, and gliflozins, i.e., sodium glucose co-transporter 2 (SGLT2) inhibitors. The problems associated with the chromatographic analysis of the peptide compounds (glutides) and the polar drugs (gliflozins) were addressed. Furthermore, issues related to in vitro experiments and the use of stable isotopes were discussed.

Glycosylation Improves the Proteolytic Stability of Exenatide

Exenatide was the first marketed GLP-1 receptor agonist for the treatment of type 2 diabetes. Modification to the chemical structure or the formulation has the potential to increase the stability of exenatide. We introduced human complex-type sialyloligosaccharide to exenatide at the native Asn28 position. The synthesis was achieved using both solid phase peptide synthesis (SPPS) and Omniligase-1-mediated chemoenzymatic ligation. The results demonstrate that glycosylation increases the proteolytic stability of exenatide while retaining its full biological activity.

Designing Formulation Strategies for Enhanced Stability of Therapeutic Peptides in Aqueous Solutions: A Review

Over the past few decades, there has been a tremendous increase in the utilization of therapeutic peptides. Therapeutic peptides are usually administered via the parenteral route, requiring an aqueous formulation. Unfortunately, peptides are often unstable in aqueous solutions, affecting stability and bioactivity. Although a stable and dry formulation for reconstitution might be designed, from a pharmaco-economic and practical convenience point of view, a peptide formulation in an aqueous liquid form is preferred. Designing formulation strategies that optimize peptide stability may improve bioavailability and increase therapeutic efficacy. This literature review provides an overview of various degradation pathways and formulation strategies to stabilize therapeutic peptides in aqueous solutions. First, we introduce the major peptide stability issues in liquid formulations and the degradation mechanisms. Then, we present a variety of known strategies to inhibit or slow down peptide degradation. Overall, the most practical approaches to peptide stabilization are pH optimization and selecting the appropriate type of buffer. Other practical strategies to reduce peptide degradation rates in solution are the application of co-solvency, air exclusion, viscosity enhancement, PEGylation, and using polyol excipients.

Mapping in vivo microclimate pH distribution in exenatide-encapsulated PLGA microspheres

The pH inside the aqueous pores of poly(lactic-co-glycolic acid) (PLGA) microspheres, often termed microclimate pH (μpH), has been widely evaluated in vitro and shown to commonly be deleterious to pH-labile encapsulated drug molecules. However, whether the in vitro μpH is representative of the actual in vivo values has long been remained a largely unresolved issue. Herein we quantitatively mapped, for the first time, the in vivo μpH distribution kinetics inside degrading PLGA microspheres by combining two previously validated techniques, a cage implant system and confocal laser scanning microscopy. PLGA (50/50, Mw = 24-38 kDa, acid-end capped and ester-capped) microsphere formulations with and without encapsulating exenatide, a pH-labile peptide that is known to be unstable when pH > 4.5, were administered to rats subcutaneously via cage implants for up to 6 weeks. The results were compared with two different in vitro conditions. Strikingly, the in vivo μpH developed similarly to the low microsphere concentration in vitro condition with 1-μm nylon bags but very different from conventional high microsphere concentration sample-and-separate conditions. Improved maintenance of stable external pH in the release media for the former condition may have been one important factor. Stability of exenatide remaining inside microspheres was evaluated by mass spectrometry and found that it was steadily degraded primarily via pH-dependent acylation with a trend that slightly paralleled the changes in μpH. This methodology may be useful to elucidate pH-triggered instability of PLGA encapsulated drugs in vivo and for improving in vivo-predictive in vitro conditions for assessing general PLGA microsphere performance.