Biopolymer Electrolyte Based on Derivatives of Cellulose from Kenaf Bast Fiber

Tumor cell loaded thermosensitive hydrogel for photodynamic therapy associated tumor antigens release

BACKGROUND

Immunotherapy is a powerful strategy for treating cancer and can be used to inhibit the post-surgical relapse of tumors.

METHODS

To achieve this, a Cell@hydrogel was developed as a template using a mixture of CT26 tumor cells and Pluronic® F-127/gelatin.

RESULTS

The proposed mixture has a solution-to-gelation functionality and vice versa. The morphology of the Cell@hydrogel was characterized by scanning electron microscopy and confocal microscopy. For photodynamic immunotherapy, the Cell@hydrogel was functionalized with Cy7 (Cy7-Cell@hydrogel) to quantify reactive oxygen species in CT26 tumor cells. Gel electrophoresis and membrane integrity tests were performed to determine the efficiency of the Cy7-Cell@hydrogel following photodynamic therapy.

CONCLUSIONS

This protocol provides an alternative approach that mechanistically inhibits the post-surgical relapse of solid tumors based on immunotherapy.

3D-printed polyether-ether ketone/carboxymethyl cellulose scaffolds coated with Zn-Mn doped mesoporous bioactive glass nanoparticles

Patient-specific fabrication of scaffold/implant requires an engineering approach to manufacture the ideal scaffold. Herein, we design and 3D print scaffolds comprised of polyether-ether-ketone (PEEK) and sodium-carboxymethyl cellulose (Na-CMC). The fabricated scaffold was dip coated with Zn and Mn doped bioactive glass nanoparticles (Zn-Mn MBGNs). The synthesized ink exhibit suitable shear-thinning behavior for direct ink write (DIW) 3D printing. The scaffolds were crafted with precision, featuring 85% porosity, 0.3 mm layer height, and 1.5 mm/s printing speed at room temperature. Scanning electron microscopy images reveal a well-defined scaffold with an average pore size of 600 ± 30 μm. The energy dispersive X-ray spectroscopy analysis confirmed a well dispersed/uniform coating of Zn-Mn MBGNs on the PEEK/Na-CMC scaffold. Fourier transform infrared spectroscopy approved the presence of PEEK, CMC, and Zn-Mn MBGNs. The tensile test revealed a Young's modulus of 2.05 GPa. Antibacterial assays demonstrate inhibition zone against Staphylococcus aureus and Escherichia Coli strains. Chick Chorioallantoic Membrane assays also present significant angiogenesis potential, owing to the antigenic nature of Zn-Mn MBGNs. WST-8 cell viability assays depicted cell proliferation, with a 103% viability after 7 days of culture. This study suggests that the PEEK/Na-CMC scaffolds coated with Zn-Mn MBGNs are an excellent candidate for osteoporotic fracture treatment. Thus, the fabricated scaffold can offer multifaceted properties for enhanced patient outcomes in the bone tissue regeneration.

The physicochemical properties and molecular docking study of plasticized amphotericin B loaded sodium alginate, carboxymethyl cellulose, and gelatin-based films

Plasticizers are employed to stabilize films by safeguarding their physical stability and avoiding the degradation of the loaded therapeutic drug during processing and storage. In the present study, the plasticizer effect (glycerol) was studied on bioadhesive films based on sodium alginate (SA), carboxymethyl cellulose (CMC) and gelatin (GE) polymers loaded with amphotericin B (AmB). The main objective of the current study was to assess the morphological, mechanical, thermal, optical, and barrier properties of the films as a function of glycerol (Gly) concentration (0.5-1.5 %) using different techniques such as Scanning Electron Microscope (SEM), Texture analyzer (TA), Differential Scanning Calorimeter (DSC), X-Ray Diffraction (XRD), and Fourier Transforms Infrared Spectroscopy (FTIR). The concentration increase of glycerol resulted in an increase in Water Vapor Permeability (WVP) (0.187-0.334), elongation at break (EAB) (0.88-35.48 %), thickness (0.032-0.065 mm) and moisture level (17.5-41.76 %) whereas opacity, tensile strength (TS) (16.81-0.86 MPa), and young's modulus (YM) (0.194-0.002 MPa) values decreased. Glycerol incorporation in the film-Forming solution decreased the brittleness and fragility of the films. Fourier Transform Infrared (FTIR) spectra showed that intermolecular hydrogen bonding occurred between glycerol and polymers in plasticized films compared to control films. Furthermore, molecular docking was applied to predict the binding interactions betweem AmB, CMC, gelatin, SA and glycerol, which further endorsed the stabilizing effects of glycerol in the complex formation between AmB, CMC, SA, and gelatin. The Findings of the current study demonstrated that this polymeric blend could be used to successfully prepare bioadhesive films with glycerol as a plasticizer.

A Review of Solid-State Proton-Polymer Batteries: Materials and Characterizations

The ever-increasing global population necessitates a secure and ample energy supply, the majority of which is derived from fossil fuels. However, due to the immense energy demand, the exponential depletion of these non-renewable energy sources is both unavoidable and inevitable in the approaching century. Therefore, exploring the use of polymer electrolytes as alternatives in proton-conducting batteries opens an intriguing research field, as demonstrated by the growing number of publications on the subject. Significant progress has been made in the production of new and more complex polymer-electrolyte materials. Specific characterizations are necessary to optimize these novel materials. This paper provides a detailed overview of these characterizations, as well as recent advancements in characterization methods for proton-conducting polymer electrolytes in solid-state batteries. Each characterization is evaluated based on its objectives, experimental design, a summary of significant results, and a few noteworthy case studies. Finally, we discuss future characterizations and advances.

The Protective Effect of Nutraceuticals on Hepatic Ischemia-Reperfusion Injury in Wistar Rats

Nutraceuticals are bioactive compounds present in foods, utilized to ameliorate health, prevent diseases, and support the proper functioning of the human body. They have gained attention due to their ability to hit multiple targets and act as antioxidants, anti-inflammatory agents, and modulators of immune response and cell death. Therefore, nutraceuticals are being studied to prevent and treat liver ischemia-reperfusion injury (IRI). This study evaluated the effect of a nutraceutical solution formed by resveratrol, quercetin, omega-3 fatty acid, selenium, ginger, avocado, leucine, and niacin on liver IRI. IRI was performed with 60 min of ischemia and 4 h of reperfusion in male Wistar rats. Afterward, the animals were euthanized to study hepatocellular injury, cytokines, oxidative stress, gene expression of apoptosis-related genes, TNF-α and caspase-3 proteins, and histology. Our results show that the nutraceutical solution was able to decrease apoptosis and histologic injury. The suggested mechanisms of action are a reduction in gene expression and the caspase-3 protein and a reduction in the TNF-α protein in liver tissue. The nutraceutical solution was unable to decrease transaminases and cytokines. These findings suggest that the nutraceuticals used favored the protection of hepatocytes, and their combination represents a promising therapeutic proposal against liver IRI.

Optimizing Sustainable Energy Generation in Ethanol Fuel Cells: An Exploration of Carrageenan with TiO2 Nanoparticles and Ni/CeO2 Composites

Based on the search for new biodegradable materials that are low cost and easy to synthesize by environmentally friendly methods, we report the use of carrageenan membranes (mixture of κ and λ carrageenans) with different concentrations of titanium dioxide nanoparticles (TiO₂ NPs) and Ni/CeO₂ (10 wt % Ni) for the fabrication of a novel fuel cell electrode for the oxidation of ethanol. Each membrane was characterized to determine its physicochemical properties using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. Using impedance spectroscopy (IS), a maximum value of 2.08 × 10^-4 S/cm in ionic conductivity was found for the carrageenan nanocomposite with a concentration of 5 wt % TiO₂ NPs (CR5%). Due to its high conductivity values, the CR5% membrane was mixed with Ni/CeO₂ to prepare the working electrode for cyclic voltammetry measurements. Using a solution of 1 M ethanol and 1 M KOH, the oxidation of ethanol over CR5% + Ni/CeO₂ resulted in peak current density values at forward and reverse scan voltages of 9.52 and 12.22 mA/cm², respectively. From our results, the CR5% + Ni/CeO₂ membrane proves to be more efficient in the oxidation of ethanol compared with commercially available Nafion membranes containing Ni/CeO₂.

Physico-chemical and antimicrobial characteristics of novel biodegradable films based on gellan and carboxymethyl cellulose containing rosemary essential oil

The purpose of the current investigation was to produce a novel functional composite biodegradable film by Gellan (Gla) and Carboxymethyl cellulose (CMC) biopolymers containing rosemary essential oils (REO) and evaluate their physicochemical and antimicrobial features. The film containing 5 % REO, due to its better mechanical properties (UTS = 13.44 ± 0.30 Mpa and SB = 21.14 ± 1.15 %) compared to other emulsified samples containing REO, was selected as the optimal film. Furthermore, it had less water vapor permeability (WVP = 6.60 ± 0.31 (g/mhPa) × 10^-8) in comparison to control sample (8.21 ± 0.10 (g/mhPa) × 10^-8) and the best color properties among the samples. The Scanning Electron Microscopy (SEM) images didn't show the phenomenon of agglomeration and point accumulation of REO. Also, 5 % of REO contributed to the increased compactness of the film in comparison to the film without the REO. Based on the results of Fourier-transform infrared spectroscopy (FTIR) spectra, no new chemical bonds were created by adding REO to the biopolymer substrate, and the REO was well dispersed and distributed among the Gla-CMC chains throughout the film substrate. Adding 5 % REO showed antioxidant effects. Considering the antimicrobial tests, all films containing REO had antimicrobial effects against the Staphylococcus aureus, Escherichia coli, Salmonella typhimurium, and Pseudomonas fluorescens bacterial strains.

Microencapsulation of Betacyanin Extract from Red Dragon Fruit Peel

The aim of this research was evaluated the effect of type and ratio of coating materials on characteristics of betacyanin extract microencapsulated by freeze drying. The combination was consisted of maltodextrin+gum arabic (MD+GA), maltodextrin+carboxymethyl cellulose (MD+CMC), maltodextrin+carrageenan (MD+C), and maltodextrin (MD) with ratio 3:1 and 4:1 (w/v) to the extract. Betacyanin microcapsules was analyzed for its characteristics, including encapsulation efficiency and microstructure. The result showed type and ratio of coating materials significantly influenced moisture content, color, and bulk density of the microcapsules (p<0,05). MD+GA coating material had the highest value of encapsulation efficiency (99.41 %). Microstructure analysis of the microcapsules showed it had amorphous shape. Betacyanin microcapsules from red dragon peel was potential to be natural food colorant.

Transformation of Oil Palm Waste-Derived Cellulose into Solid Polymer Electrolytes: Investigating the Crucial Role of Plasticizers

This study explores the possibility of transforming lignocellulose-rich agricultural waste materials into value-added products. Cellulose was extracted from an empty fruit bunch of oil palm and further modified into carboxymethyl cellulose (CMC), a water-soluble cellulose derivative. The CMC was then employed as the polymeric content in fabrication of solid polymer electrolyte (SPE) films incorporated with lithium iodide. To enhance the ionic conductivity of the solid polymer electrolytes, the compositions were optimized with different amounts of glycerol as a plasticizing agent. The chemical and physical effects of plasticizer content on the film composition were studied by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analysis. FTIR and XRD analysis confirmed the interaction plasticizer with the polymer matrix and the amorphous nature of fabricated SPEs. The highest ionic conductivity of 6.26 × 10^-2 S/cm was obtained with the addition of 25 wt % of glycerol. By fabricating solid polymer electrolytes from oil palm waste-derived cellulose, the sustainability of the materials can be retained while reducing the dependence on fossil fuel-derived materials in electrochemical devices.

Characterisation of microfibrils cellulose isolated from oil palm frond using high-intensity ultrasonication

This study highlighted the utilization of agricultural byproducts as an alternative fiber resource to be used as one of the materials for reinforcement biocomposite. Cellulose was extracted from oil palm frond using the alkaline treatment and successfully isolated into microfibril via the combination of carboxymethylation pre-treatment ultrasonication to get highly crystalline and good thermal stable microfibers. 4% NaOH was used during alkaline treatment and followed by oxidative bleaching with 30% H2O2. Once the extracted cellulose is chemically pre-treated with monochloroacetic acid, it was subjected to 30 minutes ultrasonication treatment to reduce its size. The detailed comparative analysis using SEM, FTIR and TGA was conducted in this work revealed some breakages of intramolecular hydrogen bonds and glycosidic bonds that occurred during the alkaline and bleaching treatment of oil palm biomass. The SEM images showed significant morphology of rigid, organized and highly ordered cellulose fibrils changed into aggregated fibril bundles of microfibrils after ultrasonication. The results from the infrared spectrums revealed that the mild alkaline treatments and oxidative bleaching were able to remove a large fraction of lignin and hemicelluloses to leave a clean cellulose sample. The isolated microfibrils cellulose exhibit good thermal stability as almost 50% of its initial mass remains at a temperature of 300 °C. These findings demonstrate that oil palm fronds can be utilized for biocomposite reinforcement applications.

Bionanocarbon Functional Material Characterisation and Enhancement Properties in Nonwoven Kenaf Fibre Nanocomposites

Bionanocarbon as a properties enhancement material in fibre reinforced nanobiocomposite was investigated for sustainable material applications. Currently, an extensive study using the micro size of biocarbon as filler or reinforcement materials has been done. However, poor fibre-matrix interface results in poor mechanical, physical, and thermal properties of the composite. Hence in this study, the nanoparticle of biocarbon was synthesised and applied as a functional material and properties enhancement in composite material. The bionanocarbon was prepared from an oil palm shell, an agriculture waste precursor, via a single-step activation technique. The nanocarbon filler loading was varied from 0, 1, 3, and 5% as nanoparticle properties enhancement in nonwoven kenaf fibre reinforcement in vinyl ester composite using resin transfer moulding technique. The functional properties were evaluated using TEM, particle size, zeta potential, and energy dispersion X-ray (EDX) elemental analysis. While the composite properties enhancement was evaluated using physical, mechanical, morphological, thermal, and wettability properties. The result indicated excellent nanofiller enhancement of fibre-matrix bonding that significantly improved the physical, mechanical, and thermal properties of the bionanocomposite. The SEM morphology study confirmed the uniform dispersion of the nanoparticle enhanced the fibre-matrix interaction. In this present work, the functional properties of bionanocarbon from oil palm shells (oil palm industrial waste) was incorporated in nanaobiocomposite, which significantly enhance its properties. The optimum enhancement of the bionanocomposite functional properties was obtained at 3% bionanocarbon loading. The improvement can be attributed to homogeneity and improved interfacial interaction between nanoparticles, kenaf fibre, and matrix.

Novel CMC-CdTe / ZnS QDs Nanosensor for the Detection of Anticancer Drug Epirubicin

Epirubicin (EPI) is one of the standard anticancer drugs that apply for various cancers treatment. However, the accumulation of EPI in the human body can be highly toxic, and it causes inevitable harm to organs. As a result, the evaluation of low concentrations of this drug in body samples requires sensitive, rapid, and accurate analysis methods. The fluorescence method is an efficient way in comparison of the traditional methods such as liquid chromatography, capillary electrophoresis, and electrochemical methods. Herein, we synthesized a novel fluorescence nanosensor named CMC-CdTe/ZnS based on using quantum dots (QDs). The structure of the prepared nanosensor is confirmed by different analysis methods such as FT-IR, TGA, and TEM. Besides that, the fluorescence intensity response of CMC-CdTe/ZnS QDs in the presence of Epirubicin drug is investigated. Based on obtained results, not only this nanosensor developed, but also the fluorescence quenching was explained by the typical Stern-Volmer equation. The best linear quenching equation for entitled nanosensor in the presence of Epirubicin is F0/F = 0.0346Q + 1.08 (R2 = 0.99), and the detection limit of Epirubicin is around 0.04 × 10-6 mol/L at 25 °C. All of the results display that this method could be reliable and suitable approach for determination of Epirubicin in commercial samples as well.

Fabrication and physical properties of a novel macroporous poly(vinyl alcohol)/cellulose fibre product

The objective of this work was to prepare functionalized cellulose fiber from sugar cane leaf (SCF) used to produce novel biomaterial. The SCF was treated with chloroacetic acid and sodium hydroxide (NaOH) to produce a modified cellulose fibre (MSCF). At higher MSCF loading, a greater porous density was observed under SEM. The addition of MSCF improved, the water resistance of the cured PVA/MSCF in both acid and base media through chemical reactions. The moisture absorption and moisture content of the cured PVA/MSCF film increased as the loading increased MSCF. Tg of the cured PVA/MSCF showed a clear decrease that was attributed to the greater molecular weight and softness of the molecular chains. The cured PVA/MSCF showed good MB absorption from wastewater. The improvement in biodegradability of the cured PVA/MSCF film may make it a candidate material for use in environmentally-sensitive applications.

A simple approach to prepare self-assembled, nacre-inspired clay/polymer nanocomposites

Inspired by the relationship between the well-ordered architecture of aragonite crystals and biopolymers found in natural nacre, we present a facile strategy to construct large-scale organic/inorganic nacre-mimetics with hierarchical structure via a water-evaporation driven self-assembly process. We connect LAPONITE®-nanoclay platelets with each other using carboxymethyl cellulose, a cellulose derivative, thus creating thin, flexible films with a local brick-and-mortar architecture. The dried films show a pronounced resistance against tensile forces allowing for stronger thin films than nacre. In terms of functionalities, we report excellent glass-like transparency along with exceptional shape-persistent flame shielding. We also demonstrate that through metal ion-coordination we can further strengthen the interactions between the polymers and the nanoclays, and thus enhanced mechanical, and thermal properties as well as resistance against swelling and dissolution in aqueous environments. We believe that our simple pathway to fabricate such versatile polymer/clay nanocomposites can open avenues for inexpensive production of environmentally friendly, biomimetic materials in aerospace, wearable electrical devices, and in the food packaging industry.

Prussian blue-embedded carboxymethyl cellulose nanofibril membranes for removing radioactive cesium from aqueous solution

In this study, we synthesized a Prussian blue (PB)-embedded macroporous carboxymethyl cellulose nanofibril (CMCNF) membrane for facile cesium (Cs) removal. The PB was formed in situ at Fe³⁺ sites on a CMCNF framework cross-linked using FeCl₃ as a cross-linking agent. Cubic PB particles of size 5-20 nm were observed on the macroporous CMCNF membrane surface. The PB-CMCNF membrane showed 2.5-fold greater Cs adsorption capacity (130 mg/g_PB-CMCNF) than commercial PB nanoparticles, even though the PB loading of the PB-CMCNF membrane was less than 100 mg/g_PB-CMCNF. The macroporous structure of the CMCNF membrane led to improved diffusion in the solution, thereby increasing the Cs adsorption capacity. The Cs adsorption behavior was systematically investigated in different solution chemistry. Finally, ¹³⁷Cs removal using a semicontinuous adsorption module was demonstrated in real seawater. The results showed that the PB-CMCNF membrane is a highly effective, practical material for the removal of ¹³⁷Cs from aqueous environments.

Enhancement of Plasticizing Effect on Bio-Based Polyurethane Acrylate Solid Polymer Electrolyte and Its Properties

Polyurethane acrylate (PUA) from vegetable oil has been synthesized and prepared for solid polymer electrolyte. Polyol has been end-capped with Toluene 2,4-Diisocyanate (TDI) followed by hydroxylethylmethylacrylate (HEMA) in a urethanation process to produce PUA. The mixtures were cured to make thin polymeric films under UV radiation to produce excellent cured films which exhibit good thermal stability and obtain high ionic conductivity value. 3 to 15 wt. % of ethylene carbonate (EC) mixed with 25 wt. % LiClO₄ was added to PUA to obtain PUA electrolyte systems. PUA modified with plasticizer EC 9 wt. % achieved the highest conductivity of 7.86 × 10-4 S/cm, and relatively improved the linear sweep voltammetry, transference number and dielectric properties. Fourier Transform Infrared Spectroscopy (FTIR) and dielectric analysis were presented. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), followed by X-ray Diffraction (XRD) and morphology have been studied. The addition of plasticizer to the polyurethane acrylate shows significant improvement in terms of the conductivity and performance of the polymer electrolyte.

Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites - A review

Flexible-hybrid printed electronics (FHPE) is a rapidly growing discipline that may be described as the precise imprinting of electrically functional traces and components onto a substrate such as paper to create functional electronic devices. The mass production of low-cost devices and components such as environmental sensors, bio-sensors, actuators, lab on chip (LOCs), radio frequency identification (RFID) smart tags, light emitting diodes (LEDs), smart fabrics and labels, wallpaper, solar cells, fuel cells, and batteries are major driving factors for the industry. Using renewable and bio-friendly materials would be advantageous for both manufacturers and consumers with the increased use of (FHPE) electronics in our daily lives. This review article describes recent developments in cellulose and nanocellulose-based materials for FHPE, and the necessary developments required to propagate their use in commercial applications. The aim of these developments is to enable the creation of FHPE devices and components made almost entirely of cellulose materials.

Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives

Cellulose has attracted considerable attention as the strongest potential candidate feedstock for bio-based polymeric material production. During the past decade, significant progress in the production of biopolymers based on different cellulosic forms has been achieved. This review highlights the most recent advances and developments in the three main routes for the production of cellulose-based biopolymers, and discusses their scope and applications. The use of cellulose fibers, nanocellulose, and cellulose derivatives as fillers or matrices in biocomposite materials is an efficient biosustainable alternative for the production of high-quality polymer composites and functional polymeric materials. The use of cellulose-derived monomers (glucose and other platform chemicals) in the synthesis of sustainable biopolymers and functional polymeric materials not only provides viable replacements for most petroleum-based polymers but also enables the development of novel polymers and functional polymeric materials. The present review describes the current status of biopolymers based on various forms of cellulose and the scope of their importance and applications. Challenges, promising research trends, and methods for dealing with challenges in exploitation of the promising properties of different forms of cellulose, which are vital for the future of the global polymeric industry, are discussed. Sustainable cellulosic biopolymers have potential applications not only in the replacement of existing petroleum-based polymers but also in cellulosic functional polymeric materials for a range of applications from electrochemical and energy-storage devices to biomedical applications.

A new class of dual responsive self-healable hydrogels based on a core crosslinked ionic block copolymer micelle prepared via RAFT polymerization and Diels-Alder "click" chemistry

Amphiphilic diblock copolymers of poly(furfuryl methacrylate) (PFMA) with cationic poly(2-(methacryloyloxy)ethyltrimethyl ammonium chloride) (PFMA-b-PMTAC) and anionic poly(sodium 4-vinylbenzenesulfonate) (PFMA-b-PSS) were prepared via reversible addition fragmentation chain-transfer (RAFT) polymerization by using PFMA as a macro-RAFT agent. The formation of the block copolymer was confirmed by FTIR and ¹H NMR analyses. In water, the amphiphilic diblock copolymers, (PFMA-b-PMTAC) and (PFMA-b-PSS), formed micelles with PFMA in the core and the rest of the hydrophilic polymers like PMTAC and PSS in the corona. The PFMA core was crosslinked by using Diels-Alder (DA) "Click" chemistry in water at 60 °C where bismaleimide acted as a crosslinker. Afterwards, both the core crosslinked micelles were mixed at an almost equal charge ratio which was determined by zeta potential analysis to prepare the self-assembled hydrogel. The de-crosslinking of the hydrophobic PFMA core in the self-assembled hydrogel via rDA reaction took place at 165 °C as determined from DSC analysis. This hydrogel showed self-healing behavior using ionic interaction (in the presence of water) and DA chemistry (in the presence of heat).

Investigation of Carboxymethyl Cellulose (CMC) on Mechanical Properties of Cold Water Fish Gelatin Biodegradable Edible Films

The tendency to use biocompatible packages, such as biodegradable films, is growing since they contain natural materials, are recyclable and do not cause environmental pollution. In this research, cold water fish gelatin and carboxymethyl cellulose were combined for use in edible films. Due to its unique properties, gelatin is widely used in creating gel, and in restructuring, stabilizing, emulsifying, and forming foam and film in food industries. This research for the first time modified and improved the mechanical properties of cold water fish gelatin films in combination with carboxymethyl cellulose. Cold water fish gelatin films along with carboxymethyl cellulose with concentrations of 0%, 5%, 10%, 20% and 50% were prepared using the casting method. The mechanical properties were tested by the American National Standard Method. Studying the absorption isotherm of the resulting composite films specified that the humidity of single-layer water decreased (p < 0.05) and caused a reduction in the equilibrium moisture of these films. In the mechanical testing of the composite films, the tensile strength and Young's modulus significantly increased and the elongation percent significantly decreased with the increase in the concentration of carboxymethyl cellulose. Considering the biodegradability of the films and the improvement of their mechanical properties by carboxymethyl cellulose, this kind of packaging can be used in different industries, especially the food industry, as an edible coating for packaging food and agricultural crops.

Reverse thermo-responsive hydrogels prepared from Pluronic F127 and gelatin composite materials

A series of F127–gelatin composite hydrogels with reverse thermo-responsive and tunable mechanical properties were developed.