Addressing Multi-User Interference in Vehicular Visible Light Communications: A Brief Survey and an Evaluation of Optical CDMA MAC Utilization in a Multi-Lane Scenario

Driving toward Connectivity: Vehicular Visible Light Communications Receiver with Adaptive Field of View for Enhanced Noise Resilience and Mobility

Wireless communication represents the basis for the next generation of vehicle safety systems, whereas visible light communication (VLC) is one of the most suitable technologies for this purpose. In this context, this work introduces a novel VLC receiver architecture that integrates a field-of-view (FoV) adaptation mechanism in accordance with the optical noise generated by the sun. In order to demonstrate the benefits of this concept, a VLC prototype was experimentally tested in an infrastructure-to-vehicle (I2V) VLC configuration, which uses an LED traffic light as the transmitter. At the receiver side, an automatic FoV adaptation mechanism was designed based on a mechanical iris placed in front of a photodetector. Adjustments were made based on the values recorded by a multi-angle light sensor, built with an array of IR photodiodes covering an elevation from 0° to 30° and an azimuth from -30° to 30°. Depending on the incidence of solar light, the mechanical iris can adjust the FoV from ±1° to ±22°, taking into account both the light irradiance and the sun's position relative to the VLC receiver. For experimental testing, two identical VLC receivers were used: one with an automatic FoV adjustment, and the other with a ±22° fixed FoV. The test results performed at a distance of 50 m, in the presence of solar irradiance reaching up to 67,000 µW/cm2, showed that the receiver with a fixed FoV saturated and lost the communication link most of the time, whereas the receiver with an adjustable FoV maintained an active link throughout the entire period, with a bit error rate (BER) of less than 10-7.

Experimental Demonstration of a Visible Light Communications System Based on Binary Frequency-Shift Keying Modulation: A New Step toward Improved Noise Resilience

Visible light communications (VLC) are an emerging technology that is increasingly demonstrating its ability to provide wireless communications in areas where radio frequency (RF) technology might have some limitations. Therefore, VLC systems offer possible answers to various applications in outdoor conditions, such as in the road traffic safety domain, or even inside large buildings, such as in indoor positioning applications for blind people. Nevertheless, several challenges must still be addressed in order to obtain a fully reliable solution. One of the most important challenges is focused on further improving the immunity to optical noise. Different from most works, where on-off keying (OOK) modulation and Manchester coding have been the preferred choices, this article proposes a prototype based on a binary frequency-shift keying (BFSK) modulation and non-return-to-zero (NRZ) coding, for which the resilience to noise is compared to that of a standard OOK VLC system. The experimental results showed an optical noise resilience improvement of 25% in direct exposure to incandescent light sources. The VLC system using BFSK modulation was able to maintain a maximum noise irradiance of 3500 µW/cm2 as compared with 2800 µW/cm2 for the OOK modulation, and an improvement of almost 20% in indirect exposure to the incandescent light sources. The VLC system with BFSK modulation was able to maintain the active link in an equivalent maximum noise irradiance of 65,000 µW/cm2, as opposed to the equivalent 54,000 µW/cm2 for the OOK modulation. Based on these results, one can see that based on a proper system design, VLC systems are able to provide impressive resilience to optical noise.