Analyzing Driver Drowsiness: From Causes to Effects

"We're tough, but so is quitting." Barriers to Smoking Cessation: The Royal Malaysian Navy Perspective

INTRODUCTION

Tobacco kills half of its users. Despite this, there are over 1.1 billion smokers worldwide. Its harmful effects impair performance and readiness. Unfortunately, smoking has deeply ingrained in the military culture, as evidenced by the high prevalence. Hence, this study aims to identify the barriers to smoking cessation among this population.

METHODS

A study involving two groups of current smokers (commissioned officers and non-commissioned officers) was conducted using the modified nominal group technique (mNGT), a qualitative research method of judgmental decision-making involving four phases: Generating ideas, recording, evaluation, and prioritization. The mNGT was used to solicit respondents' barriers to smoking cessation.

RESULTS

The mNGT yielded seven main barriers to smoking cessation: (1) Addiction, (2) difficulty in staying focused without the usage of cigarettes, (3) smoking has been incorporated into an individual's lifestyle, (4) environmental influence, (5) coping mechanism, (6) the long-interval period between orders and duties exacerbates the desire to smoke, and (7) smoking has evolved into a permanent habit. Although nicotine addiction and habit were ranked as the most important barriers, the military working environment and nature of the job exposed them physically and mentally to unfavorable situations, complicating the quitting attempt. Furthermore, the acceptance of smoking in military culture leads to a positive smoker identity, further hindering cessation.

CONCLUSIONS

The findings indicate that in addition to barriers affecting the general population, military-specific barriers related to the nature of the job exist, complicating cessation. Hence, any intervention program should address these barriers to achieve positive outcomes.

System and Method for Driver Drowsiness Detection Using Behavioral and Sensor-Based Physiological Measures

The amount of road accidents caused by driver drowsiness is one of the world's major challenges. These accidents lead to numerous fatal and non-fatal injuries which impose substantial financial strain on individuals and governments every year. As a result, it is critical to prevent catastrophic accidents and reduce the financial burden on society caused by driver drowsiness. The research community has primarily focused on two approaches to identify driver drowsiness during the last decade: intrusive and non-intrusive. The intrusive approach includes physiological measures, and the non-intrusive approach includes vehicle-based and behavioral measures. In an intrusive approach, sensors are used to detect driver drowsiness by placing them on the driver's body, whereas in a non-intrusive approach, a camera is used for drowsiness detection by identifying yawning patterns, eyelid movement and head inclination. Noticeably, most research has been conducted in driver drowsiness detection methods using only single measures that failed to produce good outcomes. Furthermore, these measures were only functional in certain conditions. This paper proposes a model that combines the two approaches, non-intrusive and intrusive, to detect driver drowsiness. Behavioral measures as a non-intrusive approach and sensor-based physiological measures as an intrusive approach are combined to detect driver drowsiness. The proposed hybrid model uses AI-based Multi-Task Cascaded Convolutional Neural Networks (MTCNN) as a behavioral measure to recognize the driver's facial features, and the Galvanic Skin Response (GSR) sensor as a physiological measure to collect the skin conductance of the driver that helps to increase the overall accuracy. Furthermore, the model's efficacy has been computed in a simulated environment. The outcome shows that the proposed hybrid model is capable of identifying the transition from awake to a drowsy state in the driver in all conditions with the efficacy of 91%.

Fatigue in transportation operations: A contextual factors survey among Iranian suburban drivers

BACKGROUND

Fatigue, as a persistent and serious occupational hazard, plays an important role in traffic accidents by reducing the driver's ability to maneuver with the vehicle and increasing the likelihood of falling asleep at the wheel.

OBJECTIVE

The purpose of this study was to identify the individual contextual factors, sleep condition, lifestyle, job characteristics, environmental, and economic conditions that affect the fatigue and alertness of Iranian suburban bus drivers.

METHODS

A questionnaire-based cross-sectional survey was used for this study. Non-probability sampling was used to study 401 suburban bus drivers from Tehran province, Iran, ranging in age from 24 to 67 years. The SPSS22 statistical software V27 was used for the analysis.

RESULTS

Approximately half of the participants (50.5%) had experienced fatigue while driving in the previous six months. According to a logistic regression analysis, the contextual factors were all independently related to falling asleep and fatigue while driving.

CONCLUSION

This study provides a thorough understanding of the contextual factors related to drowsy driving and emphasizes the importance of taking these things into consideration when developing interventions aimed at improving the driver's wellbeing and health and lowering the risk of errors and accidents.

EEG-Based Index for Timely Detecting User's Drowsiness Occurrence in Automotive Applications

Human errors are widely considered among the major causes of road accidents. Furthermore, it is estimated that more than 90% of vehicle crashes causing fatal and permanent injuries are directly related to mental tiredness, fatigue, and drowsiness of the drivers. In particular, driving drowsiness is recognized as a crucial aspect in the context of road safety, since drowsy drivers can suddenly lose control of the car. Moreover, the driving drowsiness episodes mostly appear suddenly without any prior behavioral evidence. The present study aimed at characterizing the onset of drowsiness in car drivers by means of a multimodal neurophysiological approach to develop a synthetic electroencephalographic (EEG)-based index, able to detect drowsy events. The study involved 19 participants in a simulated scenario structured in a sequence of driving tasks under different situations and traffic conditions. The experimental conditions were designed to induce prominent mental drowsiness in the final part. The EEG-based index, so-called “MDrow index”, was developed and validated to detect the driving drowsiness of the participants. The MDrow index was derived from the Global Field Power calculated in the Alpha EEG frequency band over the parietal brain sites. The results demonstrated the reliability of the proposed MDrow index in detecting the driving drowsiness experienced by the participants, resulting also more sensitive and timely sensible with respect to more conventional autonomic parameters, such as the EyeBlinks Rate and the Heart Rate Variability, and to subjective measurements (self-reports).

Effects of whole-body vibration on driver drowsiness: A review

INTRODUCTION

Whole-body vibration has direct impacts on driver vigilance by increasing physical and cognitive stress on the driver, which leads to drowsiness, fatigue and road traffic accidents. Although sleep deprivation, sleep apnoea and alcohol consumption can also lead to driver drowsiness, exposure to steady vibration is the factor most readily controlled by changes to vehicle design, yet it has received comparatively less attention.

METHODS

This review investigated interrelationships between the various components of whole-body vibration and the physiological and cognitive parameters that lead to driver drowsiness, as well as the effects of vibration parameters (frequency, amplitude, waveform and duration). Vibrations transmitted to the driver body from the vehicle floor and/or seat have been considered for this review, whereas hand-arm vibration, shocks, acute or transient vibration were excluded from consideration.

RESULTS

Drowsiness is affected by interactions between the frequency, amplitude, waveform and duration of the vibration. Under optimal conditions, whole-body vibration can induce significant drowsiness within 30 min. Low frequency whole-body vibrations, particularly vibrations of 4-10 Hz, are most effective at inducing drowsiness. This review notes some limitations of current studies and suggests directions for future research.

CONCLUSIONS

This review demonstrated a strong causal link exists between whole-body vibration and driver drowsiness. Since driver drowsiness has been established to be a significant contributor to motor vehicle accidents, research is needed to identify ways to minimise the components of whole-body vibration that contribute to drowsiness, as well as devising more effective ways to counteract drowsiness.

PRACTICAL APPLICATIONS

By raising awareness of the vibrational factors that contribute to drowsiness, manufacturers will be prompted to design vehicles that reduce the influence of these factors.

Effects of Automation and Fatigue on Drivers from Various Age Groups

This study explores how drivers are affected by automation when driving in rested and fatigued conditions. Eighty-nine drivers (45 females, 44 males) aged between 20 and 85 years attended driving experiments on separate days, once in a rested and once in a fatigued condition, in a counterbalanced order. The results show an overall effect of automation to significantly reduce drivers’ workload and effort. The automation had different effects, depending on the drivers’ conditions. Differences between the manual and automated mode were larger for the perceived time pressure and effort in the fatigued condition as compared to the rested condition. Frustration was higher during manual driving when fatigued, but also higher during automated driving when rested. Subjective fatigue and the percentage of eye closure (PERCLOS) were higher in the automated mode compared to manual driving mode. PERCLOS differences between the automated and manual mode were higher in the fatigued condition than in the rested condition. There was a significant interaction effect of age and automation on drivers’ PERCLOS. These results are important for the development of driver-centered automation because they show different benefits for drivers of different ages, depending on their condition (fatigued or rested).

Driver Drowsiness Detection by Applying Deep Learning Techniques to Sequences of Images

This work presents the development of an ADAS (advanced driving assistance system) focused on driver drowsiness detection, whose objective is to alert drivers of their drowsy state to avoid road traffic accidents. In a driving environment, it is necessary that fatigue detection is performed in a non-intrusive way, and that the driver is not bothered with alarms when he or she is not drowsy. Our approach to this open problem uses sequences of images that are 60 s long and are recorded in such a way that the subject’s face is visible. To detect whether the driver shows symptoms of drowsiness or not, two alternative solutions are developed, focusing on the minimization of false positives. The first alternative uses a recurrent and convolutional neural network, while the second one uses deep learning techniques to extract numeric features from images, which are introduced into a fuzzy logic-based system afterwards. The accuracy obtained by both systems is similar: around 65% accuracy over training data, and 60% accuracy on test data. However, the fuzzy logic-based system stands out because it avoids raising false alarms and reaches a specificity (proportion of videos in which the driver is not drowsy that are correctly classified) of 93%. Although the obtained results do not achieve very satisfactory rates, the proposals presented in this work are promising and can be considered a solid baseline for future works.

Impact of Safety Culture Implementation on Driving Performance among Oil and Gas Tanker Drivers: A Partial Least Squares Structural Equation Modelling (PLS-SEM) Approach

This research aims to develop a safety culture model by investigating the relationship between safety culture and driving performance. In previous studies, safety culture has been one of the factors that determine safety issues. These issues were then contextually transformed via a pilot study and organized in the form of a theoretical model. The data were collected from 307 oil and gas tanker drivers in Malaysia through questionnaire surveys. Consequently, structural equation models of partial least squares (PLS-SEM) were applied to statistically assess the final model of this study. The results showed that the implementation of safety culture contributes to driving performance at a substantial level; there is a strong association with an effect of 67.3%. The findings of this research would serve as a benchmark for decision-makers in the oil and gas transportation sector, as promoting an awareness of safety culture should boost the efficiency of drivers. This research fills a gap in knowledge by identifying that positive safety culture practices and mindset are direct antecedents for the improvement of driver performance and, thus, the avoidance of road accidents.

Microneedle Array Electrode-Based Wearable EMG System for Detection of Driver Drowsiness through Steering Wheel Grip

Driver drowsiness is a major cause of fatal accidents throughout the world. Recently, some studies have investigated steering wheel grip force-based alternative methods for detecting driver drowsiness. In this study, a driver drowsiness detection system was developed by investigating the electromyography (EMG) signal of the muscles involved in steering wheel grip during driving. The EMG signal was measured from the forearm position of the driver during a one-hour interactive driving task. Additionally, the participant’s drowsiness level was also measured to investigate the relationship between muscle activity and driver’s drowsiness level. Frequency domain analysis was performed using the short-time Fourier transform (STFT) and spectrogram to assess the frequency response of the resultant signal. An EMG signal magnitude-based driver drowsiness detection and alertness algorithm is also proposed. The algorithm detects weak muscle activity by detecting the fall in EMG signal magnitude due to an increase in driver drowsiness. The previously presented microneedle electrode (MNE) was used to acquire the EMG signal and compared with the signal obtained using silver-silver chloride (Ag/AgCl) wet electrodes. The results indicated that during the driving task, participants’ drowsiness level increased while the activity of the muscles involved in steering wheel grip decreased concurrently over time. Frequency domain analysis showed that the frequency components shifted from the high to low-frequency spectrum during the one-hour driving task. The proposed algorithm showed good performance for the detection of low muscle activity in real time. MNE showed highly comparable results with dry Ag/AgCl electrodes, which confirm its use for EMG signal monitoring. The overall results indicate that the presented method has good potential to be used as a driver’s drowsiness detection and alertness system.

Simultaneous Eye Blink Characterization and Elimination from Low-Channel Prefrontal EEG Signals Enhances Driver Drowsiness Detection

OBJECTIVE

Blink-related features derived from electroencephalography (EEG) have recently arisen as a meaningful measure of drivers cognitive state. Combined with band power features of low-channel prefrontal EEG data, blink-derived features enhance the detection of driver drowsiness. Yet, it remains unanswered whether synergy of combined blink and EEG band power features for the detection of driver drowsiness may be further boosted if a proper eye blink removal is also applied before EEG analysis. This paper proposes an algorithm for simultaneous eye blink feature extraction and elimination from low-channel prefrontal EEG data.

METHODS

Firstly, eye blink intervals (EBIs) are identified from the Fp1 EEG channel using variational mode extraction, and then blink-related features are derived. Secondly, the identified EBIs are projected to the rest of EEG channels and then filtered by a combination of principal component analysis and discrete wavelet transform. Thirdly, a support vector machine with 10-fold cross-validation is employed to classify alert and drowsy states from the derived blink and filtered EEG band power features.

MAIN RESULTS

When compared the synergy of eye blink and EEG features before and after filtering by the proposed algorithm, a significant improvement in the mean accuracy of driver drowsiness detection was achieved (71.2% vs. 78.1%, p<0.05).

SIGNIFICANCE

This paper validates a novel view of eye blinks as both a source of information and artifacts in EEG-based driver drowsiness detection.

Distractive Tasks and the Influence of Driver Attributes

Driver distraction is a major problem nowadays, contributing to many deaths, injuries, and economic losses. Despite the effort that has been made to minimize these impacts, considering the technological evolution, distraction at the wheel has tended to increase. Not only tech-related tasks but every task that captures a driver’s attention has impacts on road safety. Moreover, driver behavior and characteristics are known to be heterogeneous, leading to a distinct driving performance, which is a challenge in the road safety perspective. This study aimed to capture the effects of drivers’ personal aspects and habits on their distraction behavior. Following a within-subjects approach, a convenience sample of 50 drivers was exposed to three unexpected events reproduced in a driving simulator. Drivers’ reactions were evaluated through three distinct models: a Lognormal Model to make analyze the visual distraction, a Binary Logit Model to explore the adopted type of reaction, and a Parametric Survival Model to study the reaction times. The research outcomes revealed that drivers’ behavior and perceived workload were distinct when they were engaged in specific secondary tasks and for distinct drivers’ personal attributes and habits. Age and type of distraction showed statistical significance regarding the visual behavior. Moreover, reaction times were consistently related to gender, BMI, sleep patterns, speed, habits while driving, and type of distraction. The habit of engaging in secondary tasks while driving resulted in a cumulative better performance.

Data-Driven Detection Methods on Driver’s Pedal Action Intensity Using Triboelectric Nano-Generators

Driver’s driving actions on pedals can be regarded as an expression of driver’s acceleration/deceleration intention. Quickly and accurately detecting driving action intensity on pedals can have great contributions in preventing road traffic accidents and managing the energy consumption. In this paper, we report a pressure-sensitive and self-powered material named triboelectric nano-generators (TENGs). The generated voltage data of TENGs, which is associated with the pedal action, can be collected easily and stored sequentially. According to the characteristics of the voltage data, we have employed a hybrid machine learning method. After collecting signals from TENGs and driving simulator simultaneously, an unsupervised Gaussian mixture model is used to cluster the pedal events automatically using data from simulator. Then, multi-feature candidates of the voltage data from TENGs are extracted and ranked. A supervised random forest model that treats voltage data of TENGs as input data is trained and tested. Results show that data from TENGs can have a high accuracy of more than 90% using the random forest algorithm. The evaluating results demonstrate the accuracy of the proposed data-driven hybrid learning algorithm for recognition of driver’s pedal action intensity. Furthermore, technical and economic characteristics of TENGs and some common sensors are compared and discussed. This work may demonstrate the feasibility of using these data-driven methods on the detection of driver’s pedal action intensity.