Study of Adsorption and Flocculation Properties of Natural Clays to Remove Prorocentrum lima

A synthetic and transparent clay removes Microcystis aeruginosa efficiently

Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite's effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.

Physiological and genetic responses of the benthic dinoflagellate Prorocentrum lima to polystyrene microplastics

Microplastics are well known as contaminants in marine environments. With the development of biofilms, most microplastics will eventually sink and deposit in benthic environment. However, little research has been done on benthic toxic dinoflagellates, and the effects of microplastics on benthic dinoflagellates are unknown. Prorocentrum lima is a cosmopolitan toxic benthic dinoflagellate, which can produce a range of polyether metabolites, such as diarrhetic shellfish poisoning (DSP) toxins. In order to explore the impact of microplastics on marine benthic dinoflagellates, in this paper, we studied the effects of polystyrene (PS) on the growth and toxin production of P. lima. The molecular response of P. lima to microplastic stress was analyzed by transcriptomics. We selected 100 nm, 10 μm and 100 μm PS, and set three concentrations of 1 mg L-1, 10 mg L-1 and 100 mg L-1. The results showed that PS exposure had limited effects on cell growth, but increased the OA and extracellular polysaccharide content at high concentrations. After exposure to PS MPs, genes associated with DSP toxins synthesis, carbohydrate synthesis and energy metabolism, such as glycolysis, TCA cycle and pyruvate metabolism, were significantly up-regulated. We speculated that after exposure to microplastics, P. lima may increase the synthesis of DSP toxins and extracellular polysaccharides, improve the level of energy metabolism and gene expression of ABC transporter, thereby protecting algal cells from damage. Our findings provide new insights into the effects of microplastics on toxic benthic dinoflagellates.

Occurrence of three dominant epibenthic dinoflagellates (Ostreopsis spp., Coolia monotis and Prorocentrum lima) in relation to biotic substrates and environmental factors in a highly dynamic ecosystem, the Strait of Gibraltar (Southwestern Mediterranean)

No studies have been carried out on the benthic harmful algal blooms (BHABs) along the Strait of Gibraltar in the Mediterranean, and little is known about the diversity of blooming species. Here, epibenthic dinoflagellates were monitored at least biweekly over 18 months (May 2019-November 2020) in Oued Lihoud, Cap Malabata and Dalia on the thalli of five dominant macrophytes and in the water column. This is the first report on the seasonal distribution of BHAB species hosted by natural biotic substrates in the Strait of Gibraltar, which is known for high hydrodynamics, major entry of Atlantic waters and important maritime traffic. Three BHAB dinoflagellates were observed in the surveyed areas: Ostreopsis spp., Coolia monotis and Prorocentrum lima. The analysis of all data at the three sites showed that Dictyota dichotoma was the most favourable macroalgae host for these benthic dinoflagellates. The highest cell densities were observed in Cap Malabata for Ostreopsis spp. (2.7 × 10⁵ cells/g fresh weight in September 2020), P. lima (4.57 × 10⁴ cells/g FW in September 2020) and C. monotis (4.07 × 10⁴ cells/g FW in June 2019). Phosphate and temperature were positively correlated to the abundances of the studied thermophilic BHAB species. In contrast, negative correlations were recorded with salinity, ammonium, nitrite, nitrate, DIN, nitrogen/phosphate ratio and suspended material, attesting of the complex relationships between environmental factors and BHAB species dynamic in each marine ecosystem. Toxin analyses of the natural phytoplankton assemblage during BHABs showed the presence of only lipophilic toxins, namely okadaic acid and dinophysistoxins produced by P. lima. These BHABs species have to be isolated to establish monoclonal cultures for ribotyping and ecophysiological investigations.

Mechanism by Which MC Controls Harmful Algal Blooms Revealed by Cell Morphology of Aureococcus anophagefferens

On the basis of field experience, a bloom does not continue after treatment with modified clay (MC), even though the residual harmful algal bloom (HAB) biomass accounts for 20–30% of the initial cells. This interesting phenomenon indicates that, in addition to causing flocculation, MC can inhibit the growth of residual cells. Here, from a cell morphology perspective, Aureococcus anophagefferens was used as a model organism to explore this scientific issue and clarify the mechanism by which MC mitigates harmful algal blooms (HABs). The results showed that, at an ~70% removal efficiency, neutral clay (NC) could not effectively inhibit the growth of residual cells, although it caused various forms of damage to residual cells, such as cell deformation, cell breakage, decreased extracellular polysaccharides (EPS), increased cell membrane permeability, and increased cytoplasmic granularity, due to physical collisions. After modification, some physical and chemical properties of the clay particle surface were changed; for example, the surface electrical properties changed from negative to positive, lamellar spacing increased, hardness decreased, adhesion chains increased, adhesion improved, and the number of absorption sites increased, enhancing the occurrence of chemical and electrochemical effects and physical collisions with residual cells, leading to severe cell deformation and chemical cell breakage. Thus, MC effectively inhibited the growth of residual cells and controlled HABs.

Application of an algal growth inhibition assay to determine distribution coefficients of benzalkonium ions between kaolinite and water

Benzalkonium compounds are widely used and found in environmental samples. Due to their amphiphilic nature, it is important to know sorption coefficients to account their bioavailability. However, currently available models describing their partitioning were developed using low molecular weight homologues and it cannot be ascertained whether they are applicable to their higher molecular weight homologues. Reasons for the scarcity of data on highly sorptive compounds include the lack of reliable quantification techniques for analyzing these chemicals at environmentally relevant levels. This study, therefore, reports on an algal growth inhibition assay-based method for the determination of kaolinite/water distribution coefficients for benzalkonium compounds at their environmentally relevant concentration range. Sorption to clay was computed using the difference between median effective concentration determined in a culture with kaolinite and that derived from a culture grown in standard medium. A kinetic model was used to account for uptake into algal cells and to calculate free concentrations. Due to the sensitivity of the algal species, Pseudokirchneriella subcapitata, it was possible to determine distribution coefficients below micromole per liter concentrations. The computed distribution coefficients showed a linear increase with number of carbon atoms in the alkyl chain up to 14. The proposed bioassay-based method should be applicable to determine distribution coefficients for highly hydrophobic chemicals and ionic liquids at a concentration range lower than typical analytical limits.

Turn the potential greenhouse gases into biomass in harmful algal blooms waters: A microcosm study

Carbon sources are a critical requirement for the proliferation of algae and the occurrence of harmful algal blooms (HABs), but are often turned into methane (CH₄) after the collapse of severe HABs. Here, we attempt to remove HABs, reduce algal-derived CH₄ emissions, and repair the broken carbon biogeochemical cycle in aquatic systems using an integrated ecological approach including flocculation, capping, and submerged macrophyte induction, preliminary at a microcosm scale. This strategy sustainably reached 98% algal removal after 65 days of incubation and resulted in an aerobic microenvironment (ORP = +12 mv) at the sediment-water interface. The approach contributed to an approximate 60% decline in CH₄ released from the aquatic environment into the atmosphere jointly through assimilation of mineralized organic carbon by submerged macrophytes, production of carbon dioxide (CO₂) under aerobic conditions, and aerobic CH₄ oxidation. Some of the CO₂ produced in the aquatic phase contributed to inorganic carbon and formed the submerged macrophytes biomass. A combination of flocculation, capping, and submerged macrophyte incubation were significant contributors to altering the carbon budget and sealing nearly 99% of the carbon in the simulated ecosystem (the majority in sediment, followed by submerged macrophytes), providing a sustainable way to reuse algal-derived carbon and reduce CH₄ emissions.

Radioactive Cobalt(II) Removal from Aqueous Solutions Using a Reusable Nanocomposite: Kinetic, Isotherms, and Mechanistic Study

A lignocellulose/montmorillonite (LMT) nanocomposite was prepared as a reusable adsorbent for cobalt(II) ions, and characterized by nitrogen (N₂) adsorption/desorption isotherm, X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FTIR). LMT exhibited efficient adsorption of cobalt ions (Co(II)), and the adsorbed Co(II) was readily desorbed by nitric acid (HNO₃). All parameters affecting the adsorption and/or desorption of Co(II), including initial Co(II) concentration, pH value, temperature, HNO₃ concentration, and time, were optimized. The kinetic data analysis showed that the adsorption followed the pseudo-second-order kinetic model and fit well into the Langmuir isotherm equation. Notably, the nanocomposite can be used four times without significantly losing adsorbent capability. The Energy-Dispersive X-ray (EDX) and FTIR spectra analysis also revealed that the adsorption mechanism may be mainly a chemical adsorption dominated process.