A Water–Energy–Food Nexus Perspective on the Challenge of Eutrophication

Waste Cabbage-Integrated Nutritional Superabsorbent Polymers for Water Retention and Absorption Applications

To alleviate soil impoverishment and water shortage in desert areas, as well as to reduce the impact of waste cabbage on the environment and human health, we used waste cabbage as a substrate, 2-acrylamide-2-methyl-1-propane sulfonic acid (AMPS) and acrylic acid (AA) as polymerization units, and NH₄Cl and KNO₃ as nutriment to obtain two waste cabbage-superabsorbent polymers (CB-SAP_NH4Cl and CB-SAP_KNO3) by the one-pot method. The chemical structure, thermal stability, and morphology of the polymers were investigated by Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and scanning electron microscope (SEM). Meanwhile, the water retention, water absorption, and salt resistance were compared with the purchased polymers. The results showed that the nutriment was successfully encapsulated inside the polymer, and CB-SAP_NH4Cl and CB-SAP_KNO3 at 1% nutrient concentration showed excellent water retention properties, salt resistance, and water absorption performance of 1546 and 1131 g/g (distilled water), 306 and 277 g/g (tap water), and 116 and 91 g/g (0.9% NaCl solution). Therefore, they are highly promising materials for the application.

Microbial Inoculation Improves Growth, Nutritional and Physiological Aspects of Glycine max (L.) Merr

Considering a scenario where there is a low availability and increasing costs of fertilizers in the global agricultural market, as well as a finitude of important natural resources, such as phosphorus (P), this study tested the effect of the inoculation of rhizospheric or endophytic microorganisms isolated from Hymenaea courbaril and Butia purpurascens on the growth promotion of Glycine max (L.) Merr. The tests were conducted in a controlled greenhouse system, and the effects of biofertilization were evaluated using the following parameters: dry biomass, nutritional content, and photochemical and photosynthetic performance of plants. Seed biopriming was performed with four bacterial and four fungal isolates, and the results were compared to those of seeds treated with the commercial product Biomaphos^®. Overall, microbial inoculation had a positive effect on biomass accumulation in G. max, especially in strains PA12 (Paenibacillus alvei), SC5 (Bacillus cereus), and SC15 (Penicillium sheari). The non-inoculated control plants accumulated less nutrients, both in the whole plant and aerial part, and had reduced chlorophyll index and low photosynthetic rate (A) and photochemical efficiency. Strains PA12 (P. alvei), SC5 (B. cereus), and 328EF (Codinaeopsis sp.) stood out in the optimization of nutrient concentration, transpiration rate, and stomatal conductance. Plants inoculated with the bacterial strains PA12 (P. alvei) and SC5 (B. cereus) and with the fungal strains 328EF (Codinaeopsis sp.) and SC15 (P. sheari) showed the closest pattern to that observed in plants treated with Biomaphos^®, with the same trend of direction of the means associated with chlorophyll index, (A), dry mass, and concentration of important nutrients such as N, P, and Mg. We recommend the use of these isolates in field tests to validate these strains for the production of biological inoculants as part of the portfolio of bioinputs available for G. max.

Effective adsorption of nutrients from simulated domestic sewage by modified maifanite

Modified maifanite (MMF) was prepared by the synthesized method with sulfuric acid treatment and high-temperature calcination and evaluated as an effective adsorption material to remove the nutrient salt in waste watery. Compared with the raw maifanite (RMF), the MMF exhibited a higher adsorption capacity and higher removal efficiency. The results showed that the adsorption rates of total phosphorus (TP), total nitrogen (TN), ammonia nitrogen (NH₃-N), nitrate-nitrogen (NO_x-N), and chemical oxygen demand (COD) by MMF were 86.7%, 44.9%, 29.1%, 19.8%, and 11.9%, respectively, and compared to RMF, the average adsorption capacity of these nutrients by MMF increased by 20.5 mg/kg, 126.2 mg/kg, 61.9 mg/kg, 117.18 mg/kg, and 86.9 mg/kg, respectively. MMF maintained the basic structure and composition of maifanite, while having a rougher and looser surface, more irregular pores, wider gaps, and more active materials such as oxidizing Fe. This study suggests that MMF can be further applied to treat domestic sewage and eutrophic water.

Plastic (PET) vs bioplastic (PLA) or refillable aluminium bottles - What is the most sustainable choice for drinking water? A life-cycle (LCA) analysis

Nowadays, the most important tool to evaluate the environmental impact of both petro-plastics and bioplastics is the life cycle analysis (LCA). LCA determines the overall impact on the environment by defining, calculation and analyzing all the input and output directly related to production, utilization, and disposal of a product or a process. In this work, a LCA (cradle to grave) of bottles for drinking water was developed on three scenarios: polyethylene terephthalate (PET) bottles, as conventional packaging material for outdoor drinking water, polylactic acid (PLA) bottles, as alternative and innovative biodegradable packaging and aluminum bottle, as reusable and almost infinitely refilling packaging. As a result of LCA, ten impacts categories have been accounted for, among which the global warming potential (GWP, measured as kgCO₂ eq), the eutrophication potential (EP, measured as kgPO₄ eq.), human and eco-toxicity (HTP and ETP, measured as kg 1,4-DB eq.). The average drinking water consumption in Italy has been estimated in 1.5 L per day, corresponding to three 500 ml-plastic bottles and 1 refillable aluminum bottle. LCA has been firstly applied to a single bottle production and use, then to the daily and annual bottles consumption. PET bottles production and use assure the lower environmental impacts compared to PLA bottles, burdened by agricultural phase for corn cultivation, and to aluminum bottles, when the every-day washing with hot water or water and soap is comprehended. Moreover, including the end-of-life options into the analysis, PET recycling permits to reduce up to about 30% the GWP, whereas PLA composting does not lead to any GWP savings. In this study, aluminum bottle has been considered reusable for 2.5 years. The microbiological quality of water in one-way PET and PLA bottles has been compared with the refillable bottle rinsing with hot water and soap and only hot water, highlighting that the level of contamination is alarmingly increased in the latter case.

Environmental sustainability in the food-energy-water-health nexus: A new methodology and an application to food waste in a circular economy

Current studies on the food-energy-water nexus do not capture effects on human health. This study presents a new methodology for assessing the environmental sustainability in the food-energy-water-health nexus on a life cycle basis. The environmental impacts, estimated through life cycle assessment, are used to determine a total impact on the nexus by assigning each life cycle impact to one of the four nexus aspects. These are then normalised, weighted and aggregated to rank the options for each aspect and determine an overall nexus impact. The outputs of the assessment are visualised in a "nexus quadrilateral" to enable structured and transparent interpretation of results. The methodology is illustrated by considering resource recovery from household food waste within the context of a circular economy. The impact on the nexus of four treatment options is quantified: anaerobic digestion, in-vessel composting, incineration and landfilling. Anaerobic digestion is environmentally the most sustainable option with the lowest overall impact on the nexus. Incineration is the second best option but has a greater impact on the health aspect than landfilling. Landfilling has the greatest influence on the water aspect and the second highest overall impact on the nexus. In-vessel composting is the worst option overall, despite being favoured over incineration and landfilling in circular-economy waste hierarchies. This demonstrates that "circular" does not necessarily mean "environmentally sustainable." The proposed methodology can be used to guide businesses and policy makers in interpreting a wide range of environmental impacts of products, technologies and human activities within the food-energy-water-health nexus.

Tree-Based Modeling Methods to Predict Nitrate Exceedances in the Ogallala Aquifer in Texas

The performance of four tree-based classification techniques—classification and regression trees (CART), multi-adaptive regression splines (MARS), random forests (RF) and gradient boosting trees (GBT) were compared against the commonly used logistic regression (LR) analysis to assess aquifer vulnerability in the Ogallala Aquifer of Texas. The results indicate that the tree-based models performed better than the logistic regression model, as they were able to locally refine nitrate exceedance probabilities. RF exhibited the best generalizable capabilities. The CART model did better in predicting non-exceedances. Nitrate exceedances were sensitive to well depths—an indicator of aquifer redox conditions, which, in turn, was controlled by alkalinity increases brought forth by the dissolution of calcium carbonate. The clay content of soils and soil organic matter, which serve as indicators of agriculture activities, were also noted to have significant influences on nitrate exceedances. Likely nitrogen releases from confined animal feedlot operations in the northeast portions of the study area also appeared to be locally important. Integrated soil, hydrogeological and geochemical datasets, in conjunction with tree-based methods, help elucidate processes controlling nitrate exceedances. Overall, tree-based models offer flexible, transparent approaches for mapping nitrate exceedances, identifying underlying mechanisms and prioritizing monitoring activities.

Agricultural Nitrogen Pollution of Freshwater in Germany. The Governance of Sustaining a Complex Problem

The nitrogen pollution of freshwater heavily affects social–ecological systems. To reduce negative effects, research calls for an integrated approach, including a coherent and diverse set of governance instruments. Thus far, however, the effects of (non-)integration have been blurry. Taking Germany as an example, this study sheds light on the actual complexity of the problem along five dimensions of complexity (goals, variables, dynamics, interconnections, and uncertainties). It also sheds light on related governance instruments (rules, information, and economic incentives) and their impacts on problem-solving (implementation of specific measures). Analyses include expert interviews on complexity, European water and agricultural policies, and official data on the planning and implementation of measures to reduce nitrogen concentrations. Results show Germany’s path of sustaining a complex problem by using a non-coherent and low diversity governance approach, avoiding rigorous rules, and barely using economic instruments to deal with nitrogen surpluses. A stronger integration of water and agricultural policies, as well as a better use of economic instruments, are suggested to enhance water quality in the future.

Livestock Farming at the Expense of Water Resources? The Water–Energy–Food Nexus in Regions with Intensive Livestock Farming

Policymaking in the water–energy–food nexus is characterized by complex ecological, social, and economic interdependencies. Nexus research assumes these interactions to be overseen in the respective resource governance resulting in sectoral perspectives contributing to unsustainable outcomes. In Germany, the political priority given to the formation of an internationally competitive livestock sector by means of intensification, specialization and regional concentration has exerted sustained pressure on water and soil resources. The expansion of bioenergy plants promoted by the renewable energy act has exacerbated the situation. Despite the persistency of the ecological challenges, German policymakers only reacted when the European Commission referred Germany to the European Court of Justice. Current policy efforts to tackle the ecological problems are now provoking disruptions in the agrarian sector in regions with high nitrate concentrations in water resources. By combining the social-ecological systems framework with hypotheses derived from nexus research, we explore the interactions between food, water and energy systems and aim at understanding the unsustainable outcomes. We argue that the non-consideration of the complex interdependencies between the agricultural, the water and the energy system in policymaking and the divergence of policy goals constitute a major cause of unsustainable governance.