Cyclic Ether Contaminant Removal from Water Using Nonporous Adaptive Pillararene Crystals via Host-Guest Complexation at the Solid-Solution Interface

Self-activation of potassium/iron citrate-assisted production of porous carbon/porous biochar composites from macroalgae for high-performance sorption of sulfamethoxazole

Excellent biochar properties are crucial for sorption performance, and a developed pore structure is especially important. Herein, novel porous carbon/porous biochar (PC/PB) composites, in which the porous biochar and porous carbon were prepared at the same time, were synthesized via a green method from algal biomass with the help of the self-activation of citrate for the first time, and the composites were evaluated for the sorption of sulfamethoxazole (SMX). Many micro/meso/macropores were introduced into the PC/PB composites, which showed high specific surface areas (up to 1415 m²/g) and pore volumes (up to 1.08 cm³ g^-1). The PC/PB composites displayed excellent SMX sorption capacities, which reached 844 mg g^-1. Pore filling played a crucial role in determining the sorption capacity, and hydrogen bonding, electrostatic interactions and π-π stacking controlled the sorption rate. This study provides an improved method for preparation of porous biochar.

A Review of Challenges and Opportunities for Microbially Removing 1,4-Dioxane to Meet Drinking-Water and Groundwater Guidelines

1,4-Dioxane is an emerging contaminant in drinking-water sources and contaminated sites. Microbial removal of 1,4-dioxane has attracted a lot of attention, but faces a challenge: being not able to continuously metabolize 1,4-dioxane to below most drinking-water and groundwater guidelines. The 1,4-dioxane concentrations in most drinking-water sources and contaminated sites are too low to sustain biomass growth. This minireview discusses strategies that may potentially address the challenge. The strategies include: 1) finding oligotrophs for which the minimum 1,4-dioxane concentrations to sustain biomass are low, 2) determining conditions that maximize 1,4-dioxane co-metabolism or co-oxidation, 3) creating novel materials as biomass carriers and contaminant concentrators, and 4) lowering the life-cycle costs of technologies that combine biodegradation with (electro)chemical oxidation or phytoremediation.

Remedial strategies for abating 1,4-dioxane pollution-special emphasis on diverse biotechnological interventions

1,4-dioxane is a heterocyclic ether used as a polar industrial solvent and are released as waste discharges. 1,4-dioxane deteriorates health and quality, thereby attracts concern by the environment technologists. The need of attaining sustainable development goals have resulted in search of an eco-friendly and technically viable treatment strategy. This extensive review is aimed to emphasis on the (a) characteristics of 1,4-dioxane and their occurrence in the environment as well as their toxicity, (b) remedial strategies, such as physico-chemical treatment and advanced oxidation techniques. Special reference to bioremediation that involves diverse microbial strains and their mechanism are highlighted in this review. The role of macronutrients, stimulants and other abiotic cofactors in the biodegradation of 1,4-dioxane is discussed lucidly. We have critically discussed the inducible enzymes, enzyme-based remediation, distinct instrumental method of analyses to know the fate of intermediates produced from 1,4-dioxane biotransformation. This comprehensive survey also tries to put forth the different toxicity assessment tools used in evaluating the extent of detoxification of 1,4-dioxane achieved through biotransforming mechanism. Conclusively, the challenges, opportunities, techno-economic feasibility and future prospects of implementing 1,4-dioxane through biotechnological interventions are also discussed.

Guest-induced amorphous-to-crystalline transformation enables sorting of haloalkane isomers with near-perfect selectivity

The separation of haloalkane isomers with distillation-free strategies is one of the most challenging research topics in fundamental research and also gave high guiding values to practical industrial applications. Here, this contribution provides a previously unidentified solid supramolecular adsorption material based on a leggero pillararene derivative BrP[5]L, which can separate 1-/2-bromoalkane isomers with near-ideal selectivity. Activated solids of BrP[5]L with interesting amorphous and nonporous features could adsorb 1-bromopropane and 1-bromobutane from the corresponding equal volume mixtures of 1-/2-positional isomers with purities of 98.1 and 99.0%, respectively. Single-crystal structures incorporating theoretical calculation reveal that the high selectivity originates from the higher thermostability of 1-bromoalkane-loaded structures compared to its corresponding isomer-loaded structures, which could be further attributed to the perfect size/shape match between BrP[5]L and 1-bromoalkanes. Moreover, control experiments using its counterpart macrocycle of traditional pillararene demonstrate that BrP[5]L has better adsorptive selectivity, benefiting from the intrinsic free-rotation phenylene subunit on its backbone.

Chemo-metrically formulated consortium with selectively screened bacterial strains for ameliorated biotransformation and detoxification of 1,4-dioxane

The biotransformation of 1,4-dioxane, a endrocrine disrupting chemical was achieved using different bacterial strains and their consortia. Three different bacterial isolates were screened on their ability to grow with 50 mg/L 1,4-dioxane in the basal mineral medium. Then the isolates were tested for its efficiency to biotransform 1000 mg/L 1,4-dioxane at varying period of time; 24-120 h. The isolates were distinguished by their morphological features and 16 S rRNA gene sequencing was done to evaluate the phylogenetic relationships. The isolates were identified as Bacillus marisflavi strain MGA, Aeromonas hydrophila strain AG and Shewanella putrefaciens strain AG. The degree of biotransformation was escalated by constructing a bacterial consortium using statistical tool; response-mixture matrix under the design of experiments. The fully grown bacterial strains were used as ingredients in different proportions to formulate the consortium. The biotransformation was analyzed for functional attenuation using spectroscopic techniques and reduction in 1,4-dioxane level was confirmed using mass spectrometry. The precise quantification of biotransformation using mass spectral profile revealed that the consortium removed 31%, 61% and 85% of 1000 mg/L 1,4-dioxane within 96, 120 and 144 h respectively. The activities of inducible laccase were elucidated during biotransformation of 1,4-dioxane. Bio-toxicity of treated and untreated 1,4-dioxane on brine shrimp; Artemia salina showed that the biotransformed products were less toxic. Therefore, this report would be first of its kind to report the biotransformation and detoxification of 1,4-dioxane by a statistically designed bacterial consortium.

Capture of Sulfur Mustard by Pillar[5]arene: From Host-Guest Complexation to Efficient Adsorption Using Nonporous Adaptive Crystals

Sulfur mustard (SM) has been the most frequently used chemical warfare agent. Here, we present the efficient containment of SM and its simulants by per-ethylated pillar[5]arene (EtP5). EtP5 exhibited strong binding abilities toward SM and its simulants not only in solution but also in the solid state. The association constant (Ka) between SM and EtP5 was determined as (6.2 ± 0.6) × 103 M-1 in o-xylene-d10. Single crystal structure of SM@EtP5 showed that a 1:1 inclusion complex was formed, which was driven by multiple C-H···π/Cl/S and S···π interactions. In addition, activated crystal materials of EtP5 (EtP5α) could effectively adsorb SM simulants at solid-vapor phase; powder X-ray diffraction patterns and host-guest crystal structures indicated that the uptake process triggered a solid-state structural transformation. More interestingly, the captured guest molecules could be stably contained in EtP5α for at least 6 months in air at room temperature.

Highly Selective Removal of Trace Isomers by Nonporous Adaptive Pillararene Crystals for Chlorobutane Purification

Removal of trace chlorobutane (CB) isomers is highly desired to produce high grade 1-chlorobutane (1-CB) and 2-chlorobutane (2-CB). Here, we report that nonporous adaptive crystals (NACs) of perethylated pillar[5]arene (EtP5) and pillar[6]arene (EtP6) effectively remove trace CB isomers. EtP5 NACs can remove trace 1-CB (2%) from 2-CB to improve its purity from 98.0% to 99.9%, while EtP6 NACs can remove trace 2-CB from 1-CB to improve its purity from 98.0% to 99.9%. The adsorption of trace CB isomers results in the formation of new CB-loaded crystal structures, whose thermostability is higher than their corresponding isomer-loaded structures. This determines the selectivity of NACs toward the trace CB isomers. Reversible transformations between nonporous guest-free and guest-loaded structures make EtP5 and EtP6 highly recyclable.