Evaluation of the ions release / incorporation of the prototype S-PRG filler-containing endodontic sealer

Bioactivity of Calcium Silicate-Based Endodontic Materials: A Comparative in vitro Evaluation

Background

Bioactivity refers to the ability of a material to interact with living organisms or biological systems in a way that elicits a specific response. In the context of materials science and medicine, bioactivity is particularly important because it can determine the suitability of material for various applications.

Objective

To evaluate and compare different commercially available calcium silicate-based materials regarding: 1. Morphological and elemental analysis at the dentin/material interface. 2. Calcium and silicon release and uptake by adjacent root canal dentine by evaluating the calcium and silicon incorporation depth in adjacent root canal dentin.

Materials and Methods

This study examined four calcium silicate-based cements: Biodentine, MTA Angelus, BioAggregate, and MTA Plus. One hundred extracted human teeth with intact apices and no cavities were selected. Root sections measuring 3 mm in length were created at the mid-root level using low-speed diamond discs. Bioactivity was evaluated at 1, 7, 30, and 90 days, respectively.

Results

The principal composition of the interfacial dentine layer and incorporation of calcium and silicon into dentine was measured at 1, 7, 30, and 90 days. Statistical analysis was performed by multiple comparisons using post hoc Tukey HSD.

Conclusion

All the materials have shown bioactivity, i.e. release of calcium, silicon, and their uptake in the adjacent dentin in the presence of phosphate-buffered saline.

Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange

Surface pre-reacted glass-ionomer (S-PRG) filler is a bioactive glass filler capable of releasing various ions. A culture medium to which was added an S-PRG filler eluate rich in boron was reported to enhance alkaline phosphatase (ALP) activity in human dental pulp-derived stem cells (hDPSC). To clarify the role of boron eluted from S-PRG fillers, the modified S-PRG filler eluate with different boron concentrations was prepared by using an anion exchange material. Therefore, elemental mapping analysis of anion exchange material, adsorption ratio, hDPSCs proliferation and ALP activity were evaluated. For statistical analysis, Kruskal-Wallis test was used, with statistical significance determined at p<0.05. ALP activity enhancement was not observed in hDPSC cultured in the medium that contained the S-PRG filler eluate from which boron had been removed. The result suggested the possibility that an S-PRG filler eluate with controlled boron release could be useful for the development of novel dental materials.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

OBJECTIVES

Apatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate.

METHODS

Nano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis.

RESULTS

A 2D 1H-31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site.

SIGNIFICANCE

The F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Influence of surface pre-reacted glass-ionomer (S-PRG) filler eluate on collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin

OBJECTIVE

To evaluate the effect of ions released from surface pre-reacted glass-ionomer (S-PRG) filler on collagen morphology, remineralization, and ultimate tensile strength (UTS) of demineralized dentin.

MATERIALS AND METHODS

Bovine incisor root dentins were demineralized with EDTA and divided into three treatment groups: 1) water (control); 2) S-PRG filler eluate; 3) 125 ppm sodium fluoride (NaF). After a 3-min treatment, the specimens were stored in simulated body fluid (SBF) for 3 months. Collagen morphology and remineralization were assessed using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Additionally, ultimate tensile strength (UTS) was measured.

RESULTS

TEM and SEM demonstrated that S-PRG induced more effective remineralization compared to NaF, while the control group exhibited faint mineral deposition with collagen degradation. S-PRG displayed the most homogenous mineral deposition in collagen fibrils, along with closure of interfibrillar spaces. Extensive mineral precipitation was observed within dentinal tubules in the S-PRG group. In addition, S-PRG filler eluate demonstrated significantly higher phosphate-to-amide ratio and UTS compared to NaF and control groups (p < 0.05).

CONCLUSIONS

Ion released from S-PRG filler positively influenced collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin.

CLINICAL SIGNIFICANCE

S-PRG filler enhances remineralization and improve the biomechanics of demineralized dentin.

Antibacterial Activity of a Bioactive Tooth-Coating Material Containing Surface Pre-Reacted Glass in a Complex Multispecies Subgingival Biofilm

Bioactive materials were developed with the ability to release fluoride and provide some antimicrobial potential, to be widely used in dentistry today. However, few scientific studies have evaluated the antimicrobial activity of bioactive surface pre-reacted glass (S-PRG) coatings (PRG Barrier Coat, Shofu, Kyoto, Japan) on periodontopathogenic biofilms. This study evaluated the antibacterial activity of S-PRG fillers on the microbial profile of multispecies subgingival biofilms. A Calgary Biofilm Device (CBD) was used to grow a 33-species biofilm related to periodontitis for 7 days. The S-PRG coating was applied on CBD pins from the test group and photo-activated (PRG Barrier Coat, Shofu), while the control group received no coating. Seven days after treatment, the total bacterial counts, metabolic activity, and microbial profile of the biofilms were observed using a colorimetric assay and DNA-DNA hybridization. Statistical analyses were applied; namely, the Mann-Whitney, Kruskal-Wallis, and Dunn's post hoc tests. The bacterial activity of the test group was reduced by 25.7% compared with that of the control group. A statistically significant reduction was observed for the counts of 15 species: A. naeslundii, A. odontolyticus, V. parvula, C. ochracea, C. sputigena, E. corrodens, C. gracilis, F. nucleatum polymorphum, F. nucleatum vincentii, F. periodonticum, P. intermedia, P. gingivalis, G. morbillorum, S. anginosus, and S. noxia (p ≤ 0.05). The bioactive coating containing S-PRG modified the composition of the subgingival biofilm in vitro, thereby decreasing colonization by pathogens.

Multiple-Ion Releasing Bioactive Surface Pre-Reacted Glass-Ionomer (S-PRG) Filler: Innovative Technology for Dental Treatment and Care

Surface Pre-Reacted Glass-ionomer (S-PRG) filler, which releases strontium (Sr²⁺), borate (BO₃^3-), fluoride (F^-), sodium (Na⁺), silicate (SiO₃^2-), and aluminum (Al³⁺) ions at high concentrations, is a unique glass filler that are utilized in dentistry. Because of its multiple-ion releasing characteristics, S-PRG filler exhibits several bioactivities such as tooth strengthening, acid neutralization, promotion of mineralization, inhibition of bacteria and fungi, inhibition of matrix metalloproteinases, and enhancement of cell activity. Therefore, S-PRG filler per se and S-PRG filler-containing materials have the potential to be beneficial for various dental treatments and care. Those include restorative treatment, caries prevention/management, vital pulp therapy, endodontic treatment, prevention/treatment of periodontal disease, prevention of denture stomatitis, and perforation repair/root end filling. This review summarizes bioactive functions exhibited by S-PRG filler and its possible contribution to oral health.

Immunomodulatory Effects of Endodontic Sealers: A Systematic Review

Inflammation is a crucial step prior to healing, and the regulatory effects of endodontic materials on the immune response can influence tissue repair. This review aimed to answer whether endodontic sealers can modulate the immune cells and inflammation. An electronic search in Scopus, Web of Science, PubMed, and Google Scholar databases were performed. This systematic review was mainly based on PRISMA guidelines, and the risk of bias was evaluated by SYRCLEs and the Modified CONSORT checklist for in vivo and in vitro studies, respectively. In total, 28 articles: 22 in vitro studies, and six in vivo studies were included in this systematic review. AH Plus and AH 26 can down-regulate iNOS mRNA, while S-PRG sealers can down-regulate p65 of NF-κB pathways to inhibit the production of TNF-α, IL-1, and IL-6. In vitro and in vivo studies suggested that various endodontic sealers exhibited immunomodulatory impact in macrophages polarization and inflammatory cytokine production, which could promote healing, tissue repair, and inhibit inflammation. Since the paradigm change from immune inert biomaterials to bioactive materials, endodontic materials, particularly sealers, are required to have modulatory effects in clinical conditions. New generations of endodontic sealers could hamper detrimental inflammatory responses and maintain periodontal tissue, which represent a breakthrough in biocompatibility and functionality of endodontic biomaterials.

The inhibitory effects of various ions released from S-PRG fillers on dentin protease activity

This study investigates the effect of ions released from S-PRG fillers on host-derived enzymatic degradation of dentin collagen matrices. Dentin beams (n=80) were demineralized and distributed to eight groups following baseline dry mass and total MMP activity assessments. Each group treated with boron, fluoride, sodium, silicone, strontium, aluminium, or S-PRG eluate solutions for 5 min. Untreated beams served as control. After pre-treatment, MMP activity was reassessed, beams were incubated in complete medium for 1 week, dry mass was reassessed. Incubation media were analyzed for MMP and cathepsin-K-mediated degradation fragments. Data were analyzed with ANOVA and Tukey's test. All pretreatment groups showed significant reduction in total MMP activity (p<0.05) that was sustainable after incubation in all groups except for boron and silicone groups (p<0.05). Cathepsin-K activity did not differ between control or treatment groups. The results indicated that ions released from S-PRG fillers have the potential to partly inhibit MMP-mediated endogenous enzymatic activity.

Effect of Surface Pre-Reacted Glass Ionomer Containing Dental Sealant on the Inhibition of Enamel Demineralization

The effect of a surface pre-reacted glass ionomer (S-PRG)-containing sealant on the demineralization inhibition and remineralization of intact enamel adjacent to the sealant material was investigated. BeautiSealant (BTS, S-PRG sealant, Shofu), Teeth Mate F-12.0 (TMF, fluoride-releasing sealant, Kuraray Noritake Dental), and an experimental silica-filler sealant were investigated. After pH cycling for 10 days, the enamel surface adjacent to the sealant material was observed using confocal laser microscopy and scanning electron microscopy. The polymerized sealant disks were immersed in a demineralized solution (pH: 4.3) to measure pH change. The enamel specimens with polymerized sealant disks were additionally immersed in demineralized solution, followed by energy-dispersive X-ray spectroscopy. The demineralized area of BTS was significantly smaller than that of TMF and SS (p < 0.05). The surfaces adjacent to the sealant of TMF and SS were demineralized, while the surface of BTS was comparatively intact. An increase in pH values were observed in the BTS and TMF groups. Enamel surfaces presented an inhibition of demineralization for BTS and TMF, but not for SS. Fluoride uptake from the polymerized sealant was greater for BTS than for TMF. The S-PRG-containing sealant showed a buffering ability, demineralization inhibition, promotion of remineralization, and it can be advised for clinical applications.

Development and characterization of ion-releasing fiber-reinforced flowable composite

OBJECTIVE

This study aimed to develop and characterize an ion-releasing experimental fiber-reinforced flowable composite (Bio-SFRC) and dentin treatment solution made of poly(acrylic acid) (PAA) with a high molecular weight. In addition we also evaluated the interface structure and mineralization potential between the Bio-SFRC and dentin.

METHODS

Some mechanical properties (flexural properties and fracture toughness) of Bio-SFRC in comparison with commercial inert (G-aenial Flo X) and ion-releasing materials (ACTIVA-BioActive Base/Liner and Fuji II LC) were assessed (n = 8/group). Calcium-release at different time-points was measured during the first six weeks by using a calcium-ion selective electrode. Surface analysis of composites after being stored in simulated body fluid (SBF) was investigated by using SEM/EDS. Dentin disks (n = 50) were prepared from extracted sound teeth and demineralization was simulated by acid etching. SEM/EDS was used to evaluate the microstructure of dentin on the top surface and at interface with composites after being stored in SBF.

RESULTS

Bio-SFRC showed higher fracture toughness (1.6 MPa m^1/2) (p < 0.05) compared to Flo X (1.2 MPa m^1/2), ACTIVA (1 MPa m^1/2) and Fuji II LC (0.8 MPa m^1/2). Accumulative calcium release after six weeks from Bio-SFRC (15 mg/l) was higher than other tested ion-releasing materials (≈ 6 mg/l). Mineralization was clearly seen at the interface between treated dentin and Bio-SFRC. None of the commercial tested materials showed signs of mineralization at the interface and dentinal tubules remained open.

SIGNIFICANCE

Developing such reinforced ion-releasing flowable composite and PAA solution might offer the potential for mineralization at the interface and inside the organic matrix of demineralized dentin.

S-PRG-based composites erosive wear resistance and the effect on surrounding enamel

This study evaluated Surface Pre-Reacted Glass-ionomer (S-PRG)-based-composites' surface resistance against erosive wear and their protective effect on surrounding enamel. Bovine enamel was randomized into 12 groups (n = 10/group) [erosion (e) or erosion + abrasion (a)]: nanohybrid-S-PRG-based composite (SPRGe/SPRGa), nanohybrid-S-PRG-based bulk-fill (SPRGBFe/SPRGBFa), nanoparticle-composite (RCe/RCa), nanohybrid-bulk-fill (BFe/BFa), Glass Hybrid Restorative System (GHRSe/GHRSa), and resin-modified glass-ionomer-cement (RMGICe/RMGICa). Cavities were prepared and restored. Initial profile assessment was performed on material and on adjacent enamel at distances of 100, 200, 300, 600, and 700 μm from margin. Specimens were immersed in citric acid (2 min; 6×/day for 5 days) for erosion. Erosion + abrasion groups were brushed for 1 min after erosion. Final profile assessment was performed. Two-way ANOVA and Tukey-test showed: for erosion, the GHRSe and RMGICe presented greater material wear compared to the other groups (p = 0.001); up to 300 μm away from restoration, GHRSe and SPRGBFe were able to prevent enamel loss compared to RMGICe and other composite groups (p = 0.001). For erosion + abrasion, none of the materials exhibited a significant protective effect and S-PRG-based groups showed lower wear than RMGICa and GHRSa, and higher wear than composites (p = 0.001). S-PRG-based-composites can diminish surrounding enamel loss only against erosion alone, similarly to GIC, with advantage of being a more resistant material.

Tissue Conditioner Incorporating a Nano-Sized Surface Pre-Reacted Glass-Ionomer (S-PRG) Filler

We aimed to evaluate the properties of a novel tissue conditioner containing a surface pre-reacted glass-ionomer (S-PRG) nanofiller. Tissue conditioners containing 0 (control), 2.5, 5, 10, 20, or 30 wt% S-PRG nanofiller or 10 or 20 wt% S-PRG microfiller were prepared. The S-PRG nanofillers and microfillers were observed using scanning electron microscopy. The ion release, acid buffering capacity, detail reproduction, consistency, Shore A0 hardness, surface roughness, and Candida albicans adhesion of the tissue conditioners were examined. The results indicated that the nanofiller particles were smaller and more homogeneous in size than the microfiller particles. In addition, Al, B, F, and Sr ions eluted from S-PRG were generally found to decrease after 1 day. Acid neutralization was confirmed in a concentration-dependent manner. The mechanical properties of tissue conditioners containing S-PRG nanofiller were clinically acceptable according to ISO standard 10139-1:2018, although the surface roughness increased with increasing filler content. Conditioners with 5-30 wt% nanofiller had a sublethal effect on C. albicans and reduced fungal adhesion in vitro. In summary, tissue conditioner containing at least 5 wt% S-PRG nanofiller can reduce C. albicans adhesion and has potential as an alternative soft lining material.

Evaluation of the anti-inflammatory effects of surface-reaction-type pre-reacted glass-ionomer filler containing root canal sealer in lipopolysaccharide-stimulated RAW264.7 macrophages

A prototype surface-reaction-type pre-reacted glass-ionomer (S-PRG) filler containing root canal sealer (S-PRG sealer) exhibits bioactive potential by releasing multiple ions. This study explored the suppressive effects and modes of action of S-PRG sealer extracts on proinflammatory cytokine expression in lipopolysaccharide (LPS)-stimulated RAW264.7 cells. Expression of proinflammatory cytokines was evaluated by RT-qPCR and ELISA. Expression of phosphorylated nuclear factor-kappa B (p-NF-kB) p65 was evaluated by western blotting. S-PRG sealer extracts significantly downregulated mRNA expression levels of interleukin (IL)-1α, IL-6, and TNF-α in LPS-stimulated RAW264.7 cells; the extracts also reduced the levels of IL-6 protein and p-NF-kB. In order to verify that Zn²⁺ was responsible for downregulation of proinflammatory cytokine expression, N,N,N',N'-tetrakis(2-pyridylmethyl) ethylenediamine (TPEN) was used as a heavy metal chelator with strong affinity for Zn²⁺. These effects were mitigated by TPEN. The application of ZnCl₂ reproduced the actions of S-PRG sealer extracts. These data suggest that S-PRG sealer has anti-inflammatory potential involving heavy metal ions such as Zn²⁺.

Interactions of boron released from surface pre-reacted glass ionomer with enamel/dentin and its effect on pH

This study investigated the interaction of borate ions released from surface pre-reacted glass ionomer (S-PRG) fillers with the biological apatites of enamel and dentin using solid-state (SS) magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy analysis. We further evaluated the effect of borate ions on the pH change. Bovine enamel and dentin powder were submerged in S-PRG eluate (with borate ion concentration of 100 mM) for 3 h, then washed with deionized water (DW). The dried enamel and dentin specimens were used for ¹¹B SS-NMR and Fourier transform infrared spectroscopy (FT-IR) analysis. Enamel and dentin blocks were treated with three solutions: DW (control), S-PRG eluent and borate solution (100 mM). The treated samples were submerged in the demineralization solution and the pH was measured using a pH meter daily for 6 days. The surfaces of the enamel and dentin blocks were then observed using field emission scanning electron microscopy (FE-SEM). SS-NMR analysis revealed the presence of adsorbed borate ions in the enamel and dentin samples in a tetra-coordinated form. The pH results demonstrated an increase in pH values in the S-PRG and borate groups. SEM images showed that the surfaces of the control group were demineralized, whereas the surfaces of the S-PRG and borate groups were intact. These results concluded that borate ions could be adsorbed to enamel and dentin in the tetra-coordinated form. Borate ions possess a buffer capacity which may help to protect the tooth structure against acid attacks and promote remineralization.

Effects of multi-components released from S-PRG filler on the activities of human dental pulp-derived stem cells

Numerous studies have shown that the sustained release of ions from dental restorative materials have acid buffering capacity, prevents tooth enamel demineralization, and inhibits bacterial adhesion. Herein, the release behavior and bioresponsiveness of ions released from surface pre-reacted glass-ionomer (S-PRG) fillers were investigated in different types of media based on human dental pulp-derived stem cell (hDPSC) responses. The hDPSCs were cultured for 1-7 days in S-PRG eluates diluted with varying amounts of cell culture media. S-PRG released several types of ions, such as F^-, Sr²⁺, Na⁺, Al³⁺, BO₃^3-, and SiO₃^2-. The balance of eluted ions differed depending on the dilution and solvent, which in turn affected the cytotoxicity, cell morphology, cell proliferation, and alkane phosphatase activity of hDPSCs, among other properties. The results suggest that tailored S-PRG filler eluates could be designed and prepared for application in dental practice.

Fabrication and characterization of remineralizing dental composites containing calcium type pre-reacted glass-ionomer (PRG-Ca) fillers

OBJECTIVE

To fabricate and characterize dental composites with calcium type pre-reacted glass-ionomer (PRG-Ca) fillers.

METHODS

PRG-Ca fillers were prepared by the reaction of calcium fluoroaluminosilicate glass with polyacrylic acid. Seven dental composites were produced from the same organic matrix (70/30wt% Bis-GMA/TEGDMA), with partial replacement of barium borosilicate (BaBSi) fillers (60wt%) by PRG-Ca fillers (wt%): E0 (0) - control, E1 (10), E2 (20), E3 (30), E4 (40), E5 (50) and E6 (60). Enamel remineralization was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), roughness (Ra), Knoop hardness (KHN), flexural strength (FS), flexural modulus (FM), water sorption (W_sp), water solubility (W_sl), and translucency (TP). Data were analyzed to one-way ANOVA and Tukey's HSD test (α=0.05).

RESULTS

All composites with PRG-Ca induced enamel remineralization. E0 and E1 presented similar and highest DC% than E2=E3=E4=E5=E6. Ra and KHN were not influenced by PRG-Ca fillers (p<0.05). The higher the content of PRG-Ca, the lower FS, FM and TP (p<0.05). W_sp increased linearly with the content of PRG-Ca fillers (p<0.05). E6 presented the highest W_sl (p<0.05), while the W_sl of the other composites were not different from each other (p>0.05).

SIGNIFICANCE

Incorporation of 10-40wt.% of PRG-Ca fillers endowed remineralizing potential to dental composites without jeopardizing the overall behavior of their physicochemical properties. Dental composites with PRG-Ca fillers seems to be a good alternative for reinforcing the enamel against caries development.

Ion Release From Prototype Surface Pre-Reacted Glass Ionomer (S-PRG) Sealer and EndoSequence BC Sealer

OBJECTIVE

Bioactive ions, when incorporated in an endodontic sealer, can contribute to the long-term success of endodontic therapy by combating the re-infection of a tooth and promoting the healing of the periapical bone. The objective of this study was to measure the release of boron, strontium, and silicon ions from surface pre-reacted glass ionomer (S-PRG) filler containing prototype endodontic sealer over a sustained period in comparison to EndoSequence BC sealer in a simulated clinical model using extracted human teeth in vitro.

METHODS

Twelve extracted human anterior teeth were instrumented using ProTaper Next (Dentsply Sirona, Johnson City, TN, USA) files up to size X3 (#30/variable taper) with copious 2.5% NaOCl irrigation. Teeth were obturated using a single-cone technique with a matching size tapered gutta-percha point and one of two endodontic sealers: prototype S-PRG (Shofu Inc., Kyoto, Japan) or EndoSequence BC (Brasseler, Savannah, GA, USA). The teeth were soaked in phosphate-buffered saline (PBS) solution for 336 hours. Periodically, 1-mL samples of the PBS were analyzed via an inductively coupled plasma mass spectrometer to determine the concentrations of ions released by the sealers.

RESULTS

The average (S.D.) cumulative release (ng/ml) of boron, silicon, and strontium ions over 2 weeks for the prototype S-PRG sealer was 8614.9 (1264.3), 35758.9 (5986.5), and 3965.2 (145.6), and for EndoSequence BC sealer was 1860.5 (82.7), 164648.7 (16468.1), and 227.7 (4.7). Generalized linear mixed model analysis showed significant differences in ion concentration among boron, silicon, and strontium over time between the two sealer groups (Boron: P<0.0001, Silicon: P=0.010, Strontium: P=0.028). Of the three ions, strontium had the lowest amount of release for both sealers. The prototype S-PRG sealer showed a rapid initial burst followed by a slow, continuous release of strontium ions.

CONCLUSION

The prototype S-PRG sealer released boron and strontium ions in higher cumulative concentrations over 2 weeks compared to the EndoSequence BC sealer. Both the prototype S-PRG and EndoSequence BC sealers released silicon ions, although significantly more were eluted from the EndoSequence BC sealer. Antimicrobial and osteogenic ion release from sealers is expected to positively influence the post-treatment control of microbial infections to improve periapical healing.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers

OBJECTIVES

Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters.

METHODS

Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 μm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined.

RESULTS

SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating.

CONCLUSION

S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

The potential of a surface pre-reacted glass root canal dressing for treating apical periodontitis in rats

AIM

To evaluate the efficacy of a prototype root canal dressing containing surface pre-reacted glass-ionomer (S-PRG) fillers on repairing induced periapical lesions in a rat model. Calcium hydroxide [Ca(OH)₂ ] was applied as a comparison in the healing process.

METHODOLOGY

The pulp chambers of the maxillary first molars in 64 male Wistar rats aged 16 weeks were opened to induce periapical lesions. After 28 days, the mesial canal of each tooth was prepared, irrigated with 2.5% sodium hypochlorite only (control group: irrigation) or followed by the respective dressing [Ca(OH)₂ group, irrigation + Ca(OH)₂ ; S-PRG group, irrigation + S-PRG] and restored with composite resin for 3 or 7 days (10/group). Four rats with healthy molars were used as blank controls. Descriptive analysis of the periapical radiographs, haematoxylin and eosin staining and immunohistochemical observation was performed 3 and 7 days after treatment. The periapical grey value, CD68 macrophages and osteoclasts (cathepsin-K) were quantified and statistically analysed with Tukey's honest significant difference test. A significant difference was achieved when P values were <0.05.

RESULTS

S-PRG and Ca(OH)₂ dressings were associated with increased periapical grey values and inhibited osteoclast activity at 3 and 7 days; a significant difference in radiographic results and the number of osteoclasts was obtained at 3 and 7 days compared with the control group (P < 0.05). Reparative tissue was observed histologically in the space of the periapical resorbed necrotic area after S-PRG and Ca(OH)₂ treatment for 3 and 7 days. The number of macrophages was significantly decreased at 3 and 7 days in the S-PRG and Ca(OH)₂ specimens when compared with the controls (P < 0.05).

CONCLUSIONS

In a rat experimental model, the S-PRG root canal dressing was comparable to Ca(OH)₂ in promoting the healing of experimentally induced periapical lesions. S-PRG paste has the potential to be used as an alternative intracanal dressing in teeth with apical periodontitis.

A Novel Bioactive Endodontic Sealer Containing Surface-Reaction-Type Prereacted Glass-Ionomer Filler Induces Osteoblast Differentiation

Surface‑reaction‑type prereacted glass-ionomer (S‑PRG) fillers exhibit bioactive properties by the release of multiple ions. This study examined whether a novel endodontic sealer containing S‑PRG fillers (PRG+) has the capacity to induce osteoblast differentiation. Kusa‑A1 osteoblastic cells were cultured with extracts of PRG+, PRG- (an experimental sealer containing S‑PRG‑free silica fillers), AH Plus (an epoxy-resin‑based sealer), and Canals N (a zinc-oxide noneugenol sealer). Cell viability and mineralized nodule formation were determined using WST‑8 assay and Alizarin red staining, respectively. Osteoblastic-marker expression was analyzed with RT‑qPCR and immunofluorescence. Phosphorylation of extracellular signal‑regulated kinase (ERK) and p38 mitogen‑activated protein kinase (MAPK) was determined with Western blotting. Extracts of freshly mixed PRG+, PRG-, and AH Plus significantly decreased cell growth, but extracts of the set samples were not significantly cytotoxic. Set PRG+ significantly upregulated mRNAs for alkaline phosphatase and bone sialoprotein (IBSP) compared to set PRG-, and upregulation was blocked by NPS2143, a calcium‑sensing receptor antagonist. Set PRG+ significantly accelerated IBSP expression, mineralized nodule formation, and enhanced the phosphorylation of ERK and p38 compared with set PRG-. In conclusion, PRG+ induced the differentiation and mineralization of Kusa‑A1 cells via the calcium-sensing receptor-induced activation of ERK and p38 MAPK.

Effects of short-time exposure of surface pre-reacted glass-ionomer eluate on dental microcosm biofilm

This study evaluated the antibacterial effects of short-time exposure of surface pre-reacted glass-ionomer (S-PRG) eluate on oral microcosm biofilm. Biofilms were treated with an S-PRG eluate at different concentrations (25%, 50%, and 100%), distilled water (DW), and 0.1% chlorhexidine (CHX) twice a day for 5 min repeatedly. After 7 days, the total and aciduric bacterial counts and biofilm dry weights were measured. An image analysis program calculated the red/green (R/G) ratios in the biofilm autofluorescence images. Microscopic analyses quantified the biofilm thickness and live/dead cell ratio and determined morphological changes in the biofilm. Bacterial counts and dry weights were not significantly different in the DW group for all S-PRG eluate concentrations. An increasing trend in the R/G ratio for 7 days biofilm treatment was observed for the S-PRG eluate and the DW groups. Furthermore, the live/dead cell ratios in the biofilm and the biofilm thickness of the S-PRG eluate groups were similar to those of the DW group. The bacteria morphology inside the biofilm changed only in the CHX group. Short-time S-PRG eluate treatment showed no significant antibacterial and antibiofilm effects. These results indicated that limited biofilm formation inhibition can be obtained by using only the S-PRG eluate.

Cutting-edge filler technologies to release bio-active components for restorative and preventive dentistry

Advancements in materials used for restorative and preventive treatment is being directed toward "bio-active" functionality. Incorporation of filler particles that release active components is a popular method to create bio-active materials, and many approaches are available to develop fillers with the ability to release components that provide "bio-protective" or "bio-promoting" properties; e.g. metal/calcium phosphate nanoparticles, multiple ion-releasing glass fillers, and non-biodegradable polymer particles. In this review paper, recent developments in cutting-edge filler technologies to release bio-active components are addressed and summarized according to their usefulness and functions, including control of bacterial infection, tooth strengthening, and promotion of tissue regeneration.

New Pre-reacted Glass Containing Dental Composites (giomers) with Improved Fluoride Release and Biocompatibility

The aim of the present work was to prepare a series of novel restorative giomers and investigate the morphology, the physico-chemical properties (residual monomer, fluoride release), and the cytotoxicity of the new materials. The experimental giomers were prepared as light-cured pastes by blending different resin matrices comprising aromatic/aliphatic/urethane (di) methacrylates, with hybrid fillers containing pre-reacted glasses (PRGs), a radiopaque glass, and nano fluorhydroxyapatite. Polyalkenoic acids based on acrylic acid/itaconic acid/N-acryloyl -L-leucine modified or not with methacrylic groups, together with a superficially active glass, were used to prepare the PRGs. The fluoride ion release of the experimental giomers was investigated within a period of 60 days of storage in bidistilled water while using a fluoride ion selective electrode. Beautifil II commercial product was used as a reference. Cell cytotoxicity tests were done in vitro, in accordance with ISO 10993-122012 proceedings. Human dermal fibroblasts and umbilical endothelial vein cultures were used. The values that were obtained for cumulative fluoride release for all experimental giomers were higher than for the Beautifil II product, being more than twice the ones that were obtained for the commercial product after 60 days of storage in bidistilled water. The experimental biomaterials showed similar and/or better results when compared to the commercial one; this effect was maintained in all tested conditions.

Lithium-containing surface pre-reacted glass fillers enhance hDPSC functions and induce reparative dentin formation in a rat pulp capping model through activation of Wnt/β-catenin signaling

Surface pre-reacted glass (S-PRG) fillers are new bioactive molecules used in dental clinic work to fill tooth defects. These fillers release various types of ions (Al⁺³, BO^-3, Na⁺, SiO₃^-2, Sr⁺² and F^-) and exhibit high biocompatibility, antibacterial capability, reduced plaque accumulation, and enhanced osteoblast differentiation. We previously showed that cement of S-PRG fillers could induce tertiary dentin formation in rat models. Previous work also showed that lithium ions can activate the Wnt/β-catenin signaling pathway in vitro and induce dentin formation in pulpotomized teeth in vivo. In the current study, we sought to enhance the effect of S-PRG cement by incorporating LiCl. We show that treatment of human dental pulp stem cells with eluates from S-PRG/LiCl combination cements leads to an upregulation in cell migration, differentiation, and mineralization in vitro. In pulp-capping animal trials, we found that S-PRG/LiCl cements could induce tertiary dentin formation 28-days post-capping. At 7 days post-capping, we identified both β-catenin and Axin2 expression using immunofluorescence, indicative of Wnt/β-catenin signaling activity. In conclusion, S-PRG/LiCl cement is highly effective in promoting human dental pulp stem cells profiles and in enhancing reparative dentin formation in rat teeth through activation of the Wnt/β-catenin canonical signaling pathway. STATEMENT OF SIGNIFICANCE: This is the first study to assess the behavior of S-PRG fillers containing lithium ions on human dental pulp stem cells. We show that this new combination cement promotes positive cell responses by activating the endogenous Wnt/β-catenin signaling pathway in the pulp. The Wnt/β-catenin canonical signaling pathway is involved in many developmental and wound healing processes. The released lithium ions from the S-PRG cement were systematically detected <0.01 mmol/L in our rat model. But it was efficient to induce tertiary dentin formation at the defect site. Since this novel bioactive cement is potentially a promising material for clinical pulp regenerative therapy, future human clinical trials will be needed.

Surface Pre-Reacted Glass Filler Contributes to Tertiary Dentin Formation through a Mechanism Different Than That of Hydraulic Calcium-Silicate Cement

The induction of tissue mineralization and the mechanism by which surface pre-reacted glass-ionomer (S-PRG) cement influences pulpal healing remain unclear. We evaluated S-PRG cement-induced tertiary dentin formation in vivo, and its effect on the pulp cell healing process in vitro. Induced tertiary dentin formation was evaluated with micro-computed tomography (μCT) and scanning electron microscopy (SEM). The distribution of elements from the S-PRG cement in pulpal tissue was confirmed by micro-X-ray fluorescence (μXRF). The effects of S-PRG cement on cytotoxicity, proliferation, formation of mineralized nodules, and gene expression in human dental pulp stem cells (hDPSCs) were assessed in vitro. μCT and SEM revealed that S-PRG induced tertiary dentin formation with similar characteristics to that induced by hydraulic calcium-silicate cement (ProRoot mineral trioxide aggregate (MTA)). μXRF showed Sr and Si ion transfer into pulpal tissue from S-PRG cement. Notably, S-PRG cement and MTA showed similar biocompatibility. A co-culture of hDPSCs and S-PRG discs promoted mineralized nodule formation on surrounding cells. Additionally, S-PRG cement regulated the expression of genes related to osteo/dentinogenic differentiation. MTA and S-PRG regulated gene expression in hDPSCs, but the patterns of regulation differed. S-PRG cement upregulated CXCL-12 and TGF-β1 gene expression. These findings showed that S-PRG and MTA exhibit similar effects on dental pulp through different mechanisms.

Effect of a novel glass ionomer cement containing fluoro-zinc-silicate fillers on biofilm formation and dentin ion incorporation

OBJECTIVES

This study is aimed at evaluating the effect of a new glass ionomer cement (GIC) containing fluoro-zinc-silicate fillers on biofilm formation and ion incorporation.

MATERIALS AND METHODS

Streptococcus mutans biofilms were developed on two GIC materials: Caredyne Restore (CD) and Fuji VII (FJ); and hydroxyapatite (HA) for 24 h at 37 °C using a flow cell system. The morphological structure and bacterial viability were analyzed using a confocal laser scanning microscopy. Bacterial adhesion during the initial 2 h was also assessed by viable cell counting. To study the ion incorporation, restored cavities prepared on the root surfaces of human incisors were subjected to the elemental mapping of the zinc and fluoride ions in the GIC-dentin interface using a wavelength-dispersive X-ray spectroscopy electron probe microanalyzer.

RESULTS

Morphological observations revealed that biofilm formation in the CD group was remarkably inhibited compared with the HA and FJ groups, exhibiting sparse, thinner biofilm clusters. The microorganisms adhering to the CD group were significantly inhibited, revealing 2.9 ± 0.4 for CD, 4.9 ± 0.2 for FJ, and 5.4 ± 0.4 log colony-forming units (CFU) for HA. The CD zinc ion incorporation depth was 72.2 ± 8.0 μm. The fluoride penetration of CD was three times deeper than that of FJ; this difference was statistically significant (p < 0.05).

CONCLUSIONS

Enhanced by the incorporation of zinc and fluoride ions, the new GIC inhibited biofilm formation by interfering with bacterial adhesion.

CLINICAL RELEVANCE

A novel GIC comprised of fluoro-zinc-silicate fillers may improve clinical outcomes, such as root caries and minimally invasive dentistry.

Time dependence of multi-ion absorption into human enamel from surface prereacted glass-ionomer (S-PRG) filler eluate

Ion incorporation into the tooth is expected to be effective for caries prevention. Time-dependent ion incorporation released from surface pre-reacted glass-ionomer (S-PRG) filler eluate into tooth enamel was estimated by using inductively coupled plasma atomic emission spectroscopy (ICP-AES). Al, B, and Sr contents in enamel were increased in a time-dependent manner with immersion in S-PRG eluate. Clear ion incorporation was observed after 1 h of immersion in S-PRG filler eluate. Sr showed remarkable incorporation in enamel -up to 7,900 ppm- after 28 days of immersion. Sr and B incorporation rapidly occurred in S-PRG filler eluate, compared with their single component solutions. Simultaneous incorporation of cations and anions from S-PRG eluate occurred under balanced charge and may assist in rapid ion incorporation. Thus, various useful ions could be effectively incorporated into tooth enamel by applying S-PRG filler or its eluate; a bioactive effect can be expected.

Effect of a coating material containing surface reaction-type pre-reacted glass-ionomer filler on prevention of primary enamel demineralization detected by optical coherence tomography

We used optical coherence tomography to examine the effect of a coating material containing surface reaction-type pre-reacted glass-ionomer (S-PRG) filler on primary enamel demineralization in 18 extracted human primary teeth. The pulp was removed, and each tooth was ultrasonically cleaned with distilled water. Six teeth were treated with 0.1-M lactic acid buffer solution (De group). In the second group (n = 6), a thin film of coating material was applied before demineralization (PRG group). A third group (Control group; n = 6) was maintained in artificial saliva. Using optical coherence tomography, we measured peak signal intensity (dB) and width at 1/e² (µm) at predetermined locations on the enamel surface and calculated integrated values. All data were analyzed with ANOVA and the Tukey-Kramer test (α = 0.05). Although changes in integrated values differed between groups, there was a small but significant increase in the Control group and a small but significant decrease in the De group. In the PRG group, integrated values were significantly higher at 7 days after the start of the experiment and significantly increased thereafter. Our findings indicate that a coating material containing S-PRG fillers may prevent primary enamel demineralization.

Application of a direct pulp capping cement containing S-PRG filler

OBJECTIVES

To evaluate new pulp capping cements containing surface pre-reacted glass ionomer (S-PRG) filler and to investigate ion release kinetics and pH shift of eluates from the cement.

MATERIALS AND METHODS

Molars of Wistar rats were directly pulp capped using three kinds of cement containing S-PRG filler and mineral tri-oxide aggregate (MTA) was used as a control. After 1, 2, or 4 weeks, histological evaluation was performed and differences of tertiary dentin formation were analyzed. Release of Sr²⁺, BO₃^3-, SiO₃^2-, Na⁺, and Al³⁺ ions was determined by inductively coupled plasma-atomic emission spectrometry, and F^- ion release was measured using a fluoride ion selective electrode. The pH of the eluate from each cement after mixing was measured with a pH electrode.

RESULTS

One of S-PRG cements promoted tertiary dentin formation to the same extent as the control (p > 0.05) and it showed a tendency of less inflammatory response. This cement released more BO₃^3- and SiO₃^2-, but less Sr²⁺, Na⁺, and F^- than other S-PRG specimens. Each cement recovered nearly neutral compared with glass ionomer cement.

CONCLUSIONS

S-PRG cement induced tertiary dentin formation based on multiple ion releases, suggesting that it is suitable as a pulp capping material.

CLINICAL RELEVANCE

This new material can be an alternative pulp capping agent to MTA.

Metal ions from S-PRG filler have the potential to prevent periodontal disease

The surface pre-reacted glass ionomer (S-PRG) filler, a component of composite resin, is capable of releasing metal ions that possess antibacterial activity against caries and periodontal pathogens. Although S-PRG has been suggested to be involved in oral disease prevention, no reports have been published regarding its preventive effect on periodontal disease in vivo. The present study investigated whether the eluate from S-PRG (S-PRG eluate) has a suppressive effect on tissue destruction induced in a mouse model of ligature-induced periodontal disease. Twenty-seven C57BL/6 mice were divided into three groups of nine animals each, no ligature group (Lig(-)), ligature group (Lig(+)S-PRG(-)) and ligature with S-PRG eluate group (Lig(+)S-PRG(+)). Alveolar bone loss was evaluated using micro-computed tomography scanning. Histologic changes were detected by hematoxylin and eosin staining. The infiltration of inflammatory cells was assessed by Ly6G and F4/80 staining immunohistochemically. The distribution of metal ions was detected by time-of-flight secondary ion mass spectrometry. S-PRG eluate clearly inhibited alveolar bone loss and bone density. The histological analysis revealed that S-PRG eluate reduced destruction of the collagen bundle in the periodontal ligament and the infiltration of inflammatory cells. Immunohistochemical analysis showed that the S-PRG eluate significantly suppressed the number of infiltrating neutrophils and macrophages. Time-of-flight secondary ion mass spectrometry analysis revealed that more boron ions were present in the Lig(+)S-PRG(+) group than in the Lig(+)S-PRG(-) group. Our results suggest that the S-PRG eluate has a preventive effect against tissue destruction in periodontal disease through its anti-inflammatory effects in vivo.

Strontium folate loaded biohybrid scaffolds seeded with dental pulp stem cells induce in vivo bone regeneration in critical sized defects

Strontium folate loaded biohybrid scaffolds enhance dental pulp stem cells replication and differentiation, promoting complete regeneration of critical bone defects.

In Vitro Biocompatibility of Contemporary Bulk-fill Composites

This study evaluated the biocompatibility of contemporary bulk-fill resin-based composites (RBCs) including PRG (pre-reacted glass ionomer) materials based on the International Organization for Standardization 10993. In addition, the effect of composite thickness on cytotoxicity was also assessed. Two standard composites, two bulk-fill PRG RBCs, and three bulk-fill non-PRG RBCs were investigated. Block-shaped specimens of 2-mm and 4-mm thickness were cured with an irradiance of 700 mW/cm(2) for 20 seconds with a light-emitting diode curing light and eluted with culture medium at 37°C for 24 hours. L929 mouse fibroblasts were exposed to extracts at varying dilutions (1:1, 1:2, and 1:10) for 24 hours. Analyses were performed to assess cytotoxicity, phase contrast microscopy, and quantitative cell viability. Among the bulk-fill RBCs, extracts of PRG materials resulted in the lowest cell viability. At 4-mm thickness, undiluted extracts of bulk-fill non-PRG RBCs had significantly higher cell viability than the standard composites. Chemical composition, specimen thickness, and testing concentrations of extracts had significant effects on cell viability and morphology. Cytotoxic effects of composites on cell viability were parallel with cell morphologic changes. Not all bulk-fill RBCs demonstrated high cell viability (>70%) at 4-mm thickness despite manufacturers' recommendations of bulk placement and curing.

Periodontal regeneration using strontium-loaded mesoporous bioactive glass scaffolds in osteoporotic rats

Recent studies demonstrate that the rate of periodontal breakdown significantly increased in patients compromised from both periodontal disease and osteoporosis. One pharmacological agent used for their treatment is strontium renalate due to its simultaneous ability to increase bone formation and halt bone resorption. The aim of the present study was to achieve periodontal regeneration of strontium-incorporated mesoporous bioactive glass (Sr-MBG) scaffolds in an osteoporotic animal model carried out by bilateral ovariectomy (OVX). 15 female Wistar rats were randomly assigned to three groups: control unfilled periodontal defects, 2) MBG alone and 3) Sr-MBG scaffolds. 10 weeks after OVX, bilateral fenestration defects were created at the buccal aspect of the first mandibular molar and assessed by micro-CT and histomorphometric analysis after 28 days. Periodontal fenestration defects treated with Sr-MBG scaffolds showed greater new bone formation (46.67%) when compared to MBG scaffolds (39.33%) and control unfilled samples (17.50%). The number of TRAP-positive osteoclasts was also significantly reduced in defects receiving Sr-MBG scaffolds. The results from the present study suggest that Sr-MBG scaffolds may provide greater periondontal regeneration. Clinical studies are required to fully characterize the possible beneficial effect of Sr-releasing scaffolds for patients suffering from a combination of both periodontal disease and osteoporosis.

Therapeutic polymers for dental adhesives: loading resins with bio-active components

OBJECTIVES

Many recent adhesives on the market exhibit reasonable clinical performance. Future innovations in adhesive materials should therefore seek out novel properties rather than simply modifying existing technologies. It is proposed that adhesive materials that are "bio-active" could contribute to better prognosis of restorative treatments.

METHODS

This review examines the recent approaches used to achieve therapeutic polymers for dental adhesives by incorporating bio-active components. A strategy to maintain adhesive restorations is the focus of this paper.

RESULTS

Major trials on therapeutic dental adhesives have looked at adding antibacterial activities or remineralization effects. Applications of antibacterial resin monomers based on quaternary ammonium compounds have received much research attention, and the loading of nano-sized bioactive particles or multiple ion-releasing glass fillers have been perceived as advantageous since they are not expected to influence the mechanical properties of the carrier polymer.

SIGNIFICANCE

The therapeutic polymer approaches described here have the potential to provide clinical benefits. However, not many technological applications in this category have been successfully commercialized. Clinical evidence as well as further advancement of these technologies can be a driving force to make these new types of materials clinically available.