Pericardial Delivery of Sodium Alginate-Infusible Extracellular Matrix Composite Hydrogel Promotes Angiogenesis and Intercellular Electrical Conduction after Myocardial Infarction

Injectable extracellular matrix (iECM) is a versatile biological material with beneficial properties such as good degradability, promotion of cell survival, immunomodulation, and facilitation of vascular formation. However, intravenous injection of iECM faces challenges like a short retention time in vivo and low concentration at the lesion site. To address these issues, we prepared a composite hydrogel composed of sodium alginate and iECM and administered it via intrapericardial injection, forming a structure akin to cardiac patches within the pericardium. Compared with intramyocardial injection, intrapericardial injection avoids direct myocardial injury and ectopic tumor formation, offering less invasiveness and better biocompatibility. This study demonstrates that the sodium alginate/infusible extracellular matrix (SA/iECM) composite hydrogel can effectively prolong the local retention time of iECM in the heart, enhance electrical conduction between cardiomyocytes, promote angiogenesis at ischemic myocardial sites, inhibit apoptosis in the infarcted region, mitigate left ventricular remodeling postmyocardial infarction (MI), and improve cardiac function after infarction. Precise coordination of cardiomyocyte contraction and relaxation depends on the rhythmic occurrence of calcium-dependent action potentials. Cardiac dysfunction is partially attributed to the disruption of the excitation-contraction coupling (ECC) mechanism, which is associated with prolonged intracellular Ca2+ transients and alterations in contraction and relaxation Ca2+ levels. Our results show that the SA/iECM composite hydrogel improves electrical conduction, as evidenced by increased Cx43 expression and enhanced intercellular electrical connectivity. This research establishes that intrapericardial injection of a SA/iECM composite hydrogel is a safe and effective treatment modality, providing a theoretical basis for the use of biomaterials in MI therapy.

Selection of positive controls and their impact on anti-drug antibody assay performance

Development of assays to reliably identify and characterize anti-drug antibodies (ADAs) depends on positive control anti-idiotype (anti-id) reagents, which are used to demonstrate that the standards recommended by regulatory authorities are met. This work employs a set of therapeutic antibodies under clinical development and their corresponding anti-ids to investigate how different positive control reagent properties impact ADA assay development. Positive controls exhibited different response profiles and apparent assay analytical sensitivity values depending on assay format. Neither anti-id affinity for drug, nor sensitivity in direct immunoassays related to sensitivity in ADA assays. Anti-ids were differentially able to detect damage to drug conjugates used in bridging assays and were differentially drug tolerant. These parameters also failed to relate to assay sensitivity, further complicating selection of anti-ids for use in ADA assay development based on functional characteristics. Given this variability among anti-ids, alternative controls that could be employed across multiple antibody drugs were investigated as a more uniform means to define ADA detection sensitivity across drug products and assay protocols, which could help better relate assay results to clinical risks of ADA responses. Overall, this study highlights the importance of positive control selection to reliable detection and clinical interpretation of the presence and magnitude of ADA responses.

Strategy and validation of a nonclinical generic plug-and-play antidrug antibody method for human monoclonal antibody biotherapeutics

The measurement of antidrug antibodies (ADA) in nonclinical studies provides limited value because the formation and incidence of nonclinical ADA does not translate to clinical experience. The formation and presence of ADA in nonclinical species can, however, correlate to reduced drug exposure and safety observations including vasculitis and immune complex disease. Generic ADA methods for humanized monoclonal antibody biotherapeutics mitigate the need to develop bespoke ADA methods during nonclinical drug development. A drug-tolerant, sensitive, generic ADA immunoassay has been developed and validated for measuring ADA in cynomolgus monkey serum samples, allowing for immediate qualification of future monoclonal antibody biotherapeutics. This approach allows us to differentiate complexed and free ADA in a rapidly deployable manner when needed.

Characterization of anti-drug antibody dynamics using a bivariate mixed hidden-markov model by nonlinear-mixed effects approach

Biological therapies may act as immunogenic triggers leading to the formation of anti-drug antibodies (ADAs). Population pharmacokinetic (PK) models can be used to characterize the relationship between ADA and drug disposition but often rely on the ADA bioassay results, which may not be sufficiently sensitive to inform on this characterization.In this work, a methodology that could help to further elucidate the underlying ADA production and impact on the drug disposition was explored. A mixed hidden-Markov model (MHMM) was developed to characterize the underlying (hidden) formation of ADA against the biologic, using certolizumab pegol (CZP), as a test drug. CZP is a PEGylated Fc free TNF-inhibitor used in the treatment of rheumatoid arthritis and other chronic inflammatory diseases.The bivariate MHMM used information from plasma drug concentrations and ADA measurements, from six clinical studies (n = 845), that were correlated through a bivariate Gaussian function to infer about two hidden states; production and no-production of ADA influencing PK. Estimation of inter-individual variability was not supported in this case. Parameters associated with the observed part of the model were reasonably well estimated while parameters associated with the hidden part were less precise. Individual state sequences obtained using a Viterbi algorithm suggested that the model was able to determine the start of ADA production for each individual, being a more assay-independent methodology than traditional population PK. The model serves as a basis for identification of covariates influencing the ADA formation, and thus has the potential to identify aspects that minimize its impact on PK and/or efficacy.

Statistical Approaches for Establishing Appropriate Immunogenicity Assay Cut Points: Impact of Sample Distribution, Sample Size, and Outlier Removal

The statistical assessments needed to establish anti-drug antibody (ADA) assay cut points (CPs) can be challenging for bioanalytical scientists. Poorly established CPs that are too high could potentially miss treatment emergent ADA or, when set too low, result in detection of responses that may have no clinical relevance. We evaluated 16 validation CP datasets generated with ADA assays at Regeneron's bioanalytical laboratory and compared results obtained from different CP calculation tools. We systematically evaluated the impact of various factors on CP determination including biological and analytical variability, number of samples for capturing biological variability, outlier removal methods, and the use of parametric vs. non-parametric CP determination. In every study, biological factors were the major component of assay response variability, far outweighing the contribution from analytical variability. Non-parametric CP estimations resulted in screening positivity in drug-naïve samples closer to the targeted rate (5%) and were less impacted by skewness. Outlier removal using the boxplot method with an interquartile range (IQR) factor of 3.0 resulted in screening positivity close to the 5% targeted rate when applied to entire drug-naïve dataset. In silico analysis of CPs calculated using different sample sizes showed that using larger numbers of individuals resulted in CP estimates closer to the CP of the entire population, indicating a larger sample size (~ 150) for CP determination better represents the diversity of the study population. Finally, simpler CP calculations, such as the boxplot method performed in Excel, resulted in CPs similar to those determined using complex methods, such as random-effects ANOVA.

The Diphtheria Toxin Translocation Domain Impairs Receptor Selectivity in Cancer Cell-Targeted Protein Nanoparticles

Protein-based materials intended as nanostructured drugs or drug carriers are progressively gaining interest in nanomedicine, since their structure, assembly and cellular interactivity can be tailored by recruiting functional domains. The main bottleneck in the development of deliverable protein materials is the lysosomal degradation that follows endosome maturation. This is especially disappointing in the case of receptor-targeted protein constructs, which, while being highly promising and in demand in precision medicines, enter cells via endosomal/lysosomal routes. In the search for suitable protein agents that might promote endosome escape, we have explored the translocation domain (TD) of the diphtheria toxin as a functional domain in CXCR4-targeted oligomeric nanoparticles designed for cancer therapies. The pharmacological interest of such protein materials could be largely enhanced by improving their proteolytic stability. The incorporation of TD into the building blocks enhances the amount of the material detected inside of exposed CXCR4⁺ cells up to around 25-fold, in absence of cytotoxicity. This rise cannot be accounted for by endosomal escape, since the lysosomal degradation of the new construct decreases only moderately. On the other hand, a significant loss in the specificity of the CXCR4-dependent cellular penetration indicates the unexpected role of the toxin segment as a cell-penetrating peptide in a dose-dependent and receptor-independent fashion. These data reveal that the diphtheria toxin TD displayed on receptor-targeted oligomeric nanoparticles partially abolishes the exquisite receptor specificity of the parental material and it induces nonspecific internalization in mammalian cells.

Feasibility of using PALSAR technology as a signal amplifier for antibody bridging assay

The immunogenicity testing of oligonucleotide drugs using an antibody bridging assay has been scarcely investigated. We developed a highly sensitive antibody bridging assay model and assessed it using probe alteration link self-assembly reactions (PALSAR) technology as a signal amplifier. Methods: The concentration of each probe was optimized, and the bridging assay model was compared with and without signal amplification. Cut-point and analytical sensitivity were determined, and accuracy, precision and drug tolerance were evaluated. Results: The PALSAR bridging assay achieved a net signal 21-36 times higher than that obtained with the conventional method. The analytical sensitivity achieved was 48.8 ng/ml, with adequate accuracy, precision and drug tolerance. Conclusion: PALSAR technology is feasible for developing an antibody bridging assay using oligonucleotides as capture and detection probes.

Factors influencing the choice of monoclonal antibodies for antibody-drug conjugates

In antibody-drug conjugates (ADCs), monoclonal antibodies (mAbs) act as carriers for a cytotoxic payload providing the therapy with targeted action against cells expressing a target cell surface antigen. An appropriate choice of mAb is crucial to developing a successful ADC for clinical development. However, problems such as immunogenicity, poor pharmacokinetic (PK) and pharmacodynamic (PD) profiles and variable drug-antibody ratios (DARs) plague ADCs. In this review, we detail recent mAb-based innovations and factors that should be considered to overcome these problems to achieve a new generation of more effective ADC therapeutics.

Immunogenicity of sarilumab and impact on safety and efficacy in Japanese patients with rheumatoid arthritis: analysis of two Phase 3 randomised clinical trials

OBJECTIVES

To describe the immunogenicity profile of sarilumab in Japanese patients with rheumatoid arthritis (RA).

METHODS

Patients enrolled in the KAKEHASI and HARUKA studies were included in our analysis. In these studies, patients received sarilumab 150 mg or 200 mg every 2 weeks for 52 or 28 weeks in combination with methotrexate (MTX) (KAKEHASI), or for 52 weeks as monotherapy or in combination with non-MTX conventional synthetic disease-modifying anti-rheumatic drugs (HARUKA). Anti-drug antibodies (ADAs) and neutralising antibodies (NAbs) were assessed in the pooled population.

RESULTS

Positive ADA assay responses occurred in 10/149 (7.1%) patients treated with sarilumab 150 mg and 13/185 (7.0%) patients treated with sarilumab 200 mg, with persistent responses in 2 (1.4%) and 4 (2.2%) patients, respectively. Peak ADA titre was 30. No patients treated with the 150 mg dose and one patient (0.5%) treated with the 200 mg dose exhibited NAbs. There was no evidence of an association between ADA formation and hypersensitivity reactions or reduced efficacy.

CONCLUSIONS

ADAs, which occurred at a low frequency and titre, did not affect the safety or efficacy of sarilumab 150 or 200 mg administered as monotherapy or combination therapy in Japanese patients with RA in the KAKEHASI or HARUKA studies.

Insights on the emerging biotechnology of histidine-rich peptides

In the late 70's, the discovery of the restriction enzymes made possible the biological production of functional proteins by recombinant DNA technologies, a fact that largely empowered both biotechnological and pharmaceutical industries. Short peptides or small protein domains, with specific molecular affinities, were developed as purification tags in downstream processes to separate the target protein from the culture media or cell debris, upon breaking the producing cells. Among these tags, and by exploiting the interactivity of the imidazole ring of histidine residues, the hexahistidine peptide (H6) became a gold standard. Although initially used almost exclusively in protein production, H6 and related His-rich peptides are progressively proving a broad applicability in novel utilities including enzymatic processes, advanced drug delivery systems and diagnosis, through a so far unsuspected adaptation of their binding capabilities. In this context, the coordination of histidine residues and metals confers intriguing functionalities to His-rich sequences useable in the forward-thinking design of protein-based nano- and micro-materials and devices, through strategies that are comprehensively presented here.

Sensitive assay design for detection of anti-drug antibodies to biotherapeutics that lack an immunoglobulin Fc domain

Today the evaluation of unwanted immunogenicity is a key component in the clinical safety evaluation of new biotherapeutic drugs and macromolecular delivery strategies. However, the evolving structural complexity in contemporary biotherapeutics creates a need for on-going innovation in assay designs for reliable detection of anti-drug antibodies, especially for biotherapeutics that may not be well-suited for testing by a bridging assay. We, therefore, initiated systematic optimization of the direct binding assay to adapt it for routine use in regulatory-compliant assays of serum anti-drug antibodies. Accordingly, we first prepared a SULFO-TAG labeled conjugate of recombinant Protein-A/G to create a sensitive electrochemiluminescent secondary detection reagent with broad reactivity to antibodies across many species. Secondly, we evaluated candidate blocker-diluents to identify ones producing the highest signal-to-noise response ratios. Lastly, we introduced use of the ratio of signal responses in biotherapeutic-coated and uncoated wells as a data transformation strategy to identify biological outliers. This alternative data normalization approach improved normality, reduced skewness, and facilitated application of a parametric screening cut point. We believe the optimized direct binding assay design employing SULFO-TAG labeled Protein-A/G represents a useful analytical design for detecting serum ADA to biotherapeutics that lack an immunoglobulin Fc domain.

A strategic approach to nonclinical immunogenicity assessment: a recommendation from the European Bioanalysis Forum

Immunogenicity assays are required to evaluate anti-drug antibody (ADA) responses that can be generated against biotherapeutic modalities. Regulatory guidelines focus on clinical requirements, yet it has become apparent that industry has applied these clinical recommendations for immunogenicity assessment to nonclinical studies in varying degrees. ADAs are an anticipated outcome of dosing a humanized or fully human biotherapeutic into an animal. However, a nonclinical ADA response is rarely predictive of the immunogenic potential in humans. The addendum to ICH S6 recommends that immunogenicity should be explicitly examined where there is: evidence of altered pharmacodynamic activity; unexpected changes in exposure in the absence of a pharmacodynamic marker or evidence of immuno-mediated reactions. The European Bioanalytical Forum has extensively discussed and reached a consensus on a minimal strategic approach of when and what to include for nonclinical immunogenicity assessments. Additionally, this paper recommends a strategy for ADA assay validation and sample analysis for those cases when it is considered necessary to include an immunogenicity assessment in nonclinical toxicology studies.

Strategies to develop highly drug-tolerant cell-based neutralizing antibody assay: neutralizing antidrug antibodies extraction and drug depletion

Aim: Drug interference poses great analytical challenges for cell-based neutralizing antidrug antibodies (NAb) assay. The work aimed to improve assay drug tolerance through biotin-drug extraction with acid dissociation method optimization and developing new approach. Results: The NAb extraction with biotin-drug extraction with acid dissociation approach has been optimized by reducing biotinylated drug leaching and improving NAb elution efficiency, resulting in drug tolerance of up to 160 μg/ml. To circumvent the low acid elution efficiency of NAb from drug, a novel drug depletion approach was developed, which combined acid dissociation and drug targeted crosslinked capture, achieved drug tolerance up to 400 μg/ml. At last, a strategy workflow for sample pretreatment approach selection and optimization was established for improving drug tolerance of NAb assay. Conclusion: We demonstrated that reduced biotinylated drug leaching and the high NAb elution efficiency was critical for improving assay drug tolerance. Drug depletion offers an alternative approach to overcome low NAb elution efficiency.

Efficacy of Granulocyte and Monocyte Adsorptive Apheresis in Patients With Inflammatory Bowel Disease Showing Lost Response to Infliximab

BACKGROUND AND AIMS

In inflammatory bowel disease [IBD] patients, antibody-to-infliximab [ATI] generation is responsible for loss of response [LOR] and infusion reaction [IR] to infliximab. An immuno-therapeutic approach is considered an option to overcome LOR. Granulocyte/monocyte adsorptive apheresis [GMA] using an Adacolumn has been shown to have clinical efficacy together with immunomodulatory effects in IBD patients.

METHODS

We developed an ATI-CAI assay utilizing a C1q immobilized plate and applied it to measure ATI in patients who were receiving infliximab, including 56 with sustained response, 76 with LOR and six with IR. Furthermore, 14 patients with LOR and two with paradoxical skin reactions who received infliximab + GMA combination therapy were analysed.

RESULTS

Fourteen patients with LOR, seven with Crohn's disease and seven with ulcerative colitis, showed significantly improved clinical indices [p = 0.0009], and decreased ATI [p = 0.0171] and interleukin-6 [p = 0.0537] levels at week 8 following initiation of infliximab + GMA therapy. Nine patients who received combination therapy achieved remission, which was maintained to week 24 with infliximab alone. Additionally, cutaneous lesions in two patients with IR were improved. ATI-CAI assay efficiency was not influenced by infliximab concentration during the test. Pre- and post-infliximab infusion ATI levels were not different. Patients with ATI greater than the 0.153 μg/mL cut-off value were likely to experience LOR [odds ratio 3.0].

CONCLUSIONS

Patients who received infliximab + GMA therapy appeared to regain clinical response to infliximab by a decrease in ATI level. Furthermore, the concentration of infliximab in the test did not influence ATI measurement, but was associated with clinical response.

Failure Mode and Effects Analysis (FMEA) for Immunogenicity of Therapeutic Proteins

Biotherapeutic drugs made by cell-based systems are revolutionizing the practice of medicine. The next generation of biotherapeutics include recombinant proteins, monoclonal antibodies, viral vector expressed proteins, and cell therapies. Immunogenicity associated adverse events is one of the major risks for these biologics. Accurate and precise measurement of the immunogenicity of biologics is a critical component during all phases of drug development. We have utilized the principles of Failure Mode and Effects Analysis (FMEA) in performing assessment of risk of immunogenicity. The multi-dimensional approach involves: i) listing all the potential risks by likelihood of occurrence and severity as part of quality target product profile. ii) ascribing the causes by identifying the risks at each stage of development. iii) predicting the effects. iv) determining the risk mitigation strategy. v) implementing a monitoring process. vi) developing templates for data collection. vii) timely reporting and. viii) life cycle management. FMEA is a continuous process that works throughout the lifecycle of the product or the process and keeps on getting updated with new insights and knowledge.

Toward comparability of anti-drug antibody assays: is the amount of anti-drug antibody–reagent complexes at cut-point (CP-ARC) the missing piece?

Immunogenicity testing is a mandatory and critical activity during the development of therapeutic proteins. Multiple regulatory guidelines provide clear recommendations on appropriate immunogenicity testing strategies and required bioanalytical assay performances. Unfortunately, it is still generally accepted that a comparison of the immunogenicity of different compounds is not possible due to apparent performance differences of the used bioanalytical methods. In this perspective, we propose the ‘cut-point anti-drug antibody–reagents complex’ (CP-ARC) concept for technical comparability of the bioanalytical methods. The feasibility and implementation in routine assay development is discussed as well as the potential improvement of reporting of bioanalytical immunogenicity data to allow comparison across drugs. Scientific sound comparability of the bioanalytical methods is the first step toward comparability of clinical immunogenicity.

Analysis of regulatory guidance on antidrug antibody testing for therapeutic protein products

Therapeutic proteins have the potential to induce unwanted immune responses. The potential impact of immunogenicity on pharmacokinetics, pharmacodynamics, safety and efficacy are well established. Here, we analyze key aspects of current US FDA and EMA guidelines on the development and validation of antidrug antibody assays. Although FDA and EMA guidance documents are in harmony on most points, EMA allows greater leeway for scientific judgement, while FDA recommends specific approaches that may not be appropriate in some situations. Many white papers suggest approaches different from the guidance documents, however, these can conflict with each other and are themselves only scientifically valid in certain situations. Here, we indicate when alternatives to guidance may be needed and what those approaches might be.

EBF recommendation on practical management of critical reagents for antidrug antibody ligand-binding assays

Immunogenicity assays are required to measure antidrug antibodies that are generated against biotherapeutic modalities. As for any ligand-binding assays, critical reagents (CR) play a crucial role in immunogenicity assays, as the robustness and reliability of an assay are defined by the quality and long-term availability of these reagents. The current regulatory guidelines do not provide clear directions on how to implement and verify lot-to-lot changes of CR during an assay life cycle, or the acceptance criteria that should be used when implementing new lots of CR. These aspects were extensively discussed within the European Bioanalysis Forum community. In this paper, CR for immunogenicity assays are identified and the minimum requirements for introducing new lots of CR in immunogenicity assays are described.

Elucidation of the statistical factors that influence anti-drug antibody cut point setting through a multi-laboratory study

Aim: Appropriateness of anti-drug antibody (ADA) assay is critical for immunogenicity assessment of biopharmaceuticals. Although cut point setting in ADA assay has a large impact on the results, a standard statistical approach for its setting has not been well established. Methodology: In this multi-laboratory study, to elucidate factors influencing the cut point setting, we compared the statistical approaches and calculated cut points for multiple datasets of ADA assays using the individual procedure employed at each laboratory. Conclusion: We showed that outlier exclusion, false-positive rate and investigating data distribution have the greatest impact on both screening and confirmatory cut points. Our results would be useful for industry researchers and regulators engaged in immunogenicity assessment of biopharmaceuticals.

2018 White Paper on Recent Issues in Bioanalysis: focus on immunogenicity assays by hybrid LBA/LCMS and regulatory feedback (Part 2 - PK, PD & ADA assays by hybrid LBA/LCMS & regulatory agencies' inputs on bioanalysis, biomarkers and immunogenicity)

The 2018 12^th Workshop on Recent Issues in Bioanalysis took place in Philadelphia, PA, USA on April 9-13, 2018 with an attendance of over 900 representatives from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, week-long event - a full immersion week of bioanalysis, biomarkers and immunogenicity. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small- and large-molecule bioanalysis involving LCMS, hybrid LBA/LCMS and LBA/cell-based assays approaches. This 2018 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2018 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 2) covers the recommendations for PK, PD and ADA assays by hybrid LBA/LCMS and regulatory agencies' input. Part 1 (LCMS for small molecules, peptides, oligonucleotides and small molecule biomarkers) and Part 3 (LBA/cell-based assays: immunogenicity, biomarkers and PK assays) are published in volume 10 of Bioanalysis, issues 22 and 24 (2018), respectively.

Comparative immunogenicity assessment of biosimilars

The first anticancer biosimilars have entered clinical use, with many others under clinical development. Like all biologics, biosimilars may elicit unwanted immune responses that can significantly impact clinical efficacy and safety. Head-to-head immunogenicity assessment of biosimilars and their reference biologics should, therefore, be a critical component of a biosimilar's clinical development program. Various bioanalytical platforms may be used to detect and characterize immune responses, each having relative strengths and weaknesses. To fully recognize the clinical relevance of such data, regulators must be able to interpret immunogenicity results in an assay-specific context as well as in perspective of clinical pharmacology, efficacy and safety. Herein, we discuss current challenges imposed by global regulatory requirements for immunogenicity assessment of biosimilars.

The ninth Japan Bioanalysis Forum symposium

The ninth Japan Bioanalysis Forum symposium took place at tower hall Funabori, Tokyo, Japan, between 6 and 8 February, 2018. Bioanalytical scientists from the pharmaceutical industry, CROs, academia and regulatory bodies had many meaningful and relevant discussions on current topics of interest in bioanalysis. The 3-day symposium featured updated perspectives and experiences on regulated bioanalysis of small and large molecules, biomarker measurement and assessment of immunogenicity, as well as new areas of bioanalytical validation such as quantitative polymerase chain reaction(qPCR) and flow cytometry. There were over 260 participants from six countries, with 23 oral and 11 poster presentations, including the outcomes of Japan Bioanalysis Forum discussion groups. This report summarizes the major discussion topics from the conference.

Sensitivity and drug tolerance of antidrug antibody assays in relation to positive control characteristics

Aim: Detection and characterization of antidrug antibodies (ADA) play a key role in understanding the relation of ADA with safety and efficacy. Positive controls (PCs) are used to estimate the sensitivity and assay sensitivity in the presence of drug (drug tolerance) of assays to detect ADA. We investigated a number of factors that may drive sensitivity and drug tolerance. Results: We found no correlation between affinity and sensitivity and sensitivity in the presence of drug in multiple assays with two antibody–drug conjugates. Multiple factors that influenced sensitivity and drug tolerance were observed, yet these had limited overall predictive value for all investigated assay formats, PCs and compounds.Conclusion: Assay sensitivity and drug tolerance as studied here, are likely driven by multiple factors such as cut point confidence level, stoichiometry of PC–drug complexes and presentation of epitopes.

Application of nSMOL coupled with LC-MS bioanalysis for monitoring the Fc-fusion biopharmaceuticals Etanercept and Abatacept in human serum

The principle of nano-surface and molecular-orientation limited (nSMOL) proteolysis has a unique characteristic Fab-selective proteolysis for antibody bioanalysis that is independent of a variety of monoclonal antibodies by the binding antibody Fc via Protein A/G in a pore with 100 nm diameter and modified trypsin immobilization on the surface of nanoparticles with 200 nm diameter. Since minimizing peptide complexity and protease contamination while maintaining antibody sequence specificity enables a rapid and broad development of optimized methods for liquid chromatography-mass spectrometry (LC-MS) bioanalysis, the application of regulatory LC-MS for monitoring antibody biopharmaceuticals is expected. nSMOL is theoretically anticipated to be applicable for representative Fc-fusion biopharmaceuticals, because Protein A/G-binding site Fc exists on the C-terminus, and its functional domain is available to orient and interact with the reaction solution. In this report, we describe the validated LC-MS bioanalysis for monitoring Ethanercept and Abatacept using nSMOL technology. The quantitation range of Ethanercept in human serum was from 0.195 to 100 μg/mL using the signature peptide VFCTK (aa.43-47), and that of Abatacept was from 0.391 to 100 μg/mL using the signature peptide MHVAQPAVVLASSR (aa.1-14). Both proteins fulfilled the guideline criteria for low-molecular-weight drug compounds. The results indicate that the clinical and therapeutic monitoring for antibody and Fc-fusion biopharmaceuticals are adequately applicable using nSMOL proteolysis coupled with LC-MS bioanalysis.