Improving the sensitivity of bacterial bioreporters for heavy metals

Molecular and eco-physiological responses of soil-borne lead (Pb2+)-resistant bacteria for bioremediation and plant growth promotion under lead stress

Lead (Pb) is the 2nd known portentous hazardous substance after arsenic (As). Being highly noxious, widespread, non-biodegradable, prolonged environmental presence, and increasing accumulation, particularly in arable land, Pb pollution has become a serious global health concern requiring urgent remediation. Soil-borne, indigenous microbes from Pb-polluted sites have evolved diverse resistance strategies, involving biosorption, bioprecipitation, biomineralization, biotransformation, and efflux mechanisms, under continuous exposure to Pb in human-impacted surroundings. These strategies employ a wide range of functional bioligands to capture Pb and render it inaccessible for leaching. Recent breakthroughs in molecular technology and understanding of lead resistance mechanisms offer the potential for utilizing microbes as biological tools in environmental risk assessment. Leveraging the specific affinity and sensitivity of bacterial regulators to Pb2+ ions, numerous lead biosensors have been designed and deployed worldwide to monitor Pb bioavailability in contaminated sites, even at trace levels. Besides, the ongoing degradation of croplands due to Pb pollution poses a significant challenge to meet the escalating global food demands. The accumulation of Pb in plant tissues jeopardizes both food safety and security while severely impacting plant growth. Exploring Pb-resistant plant growth-promoting rhizobacteria (PGPR) presents a promising sustainable approach to agricultural practices. The active associations of PGPR with host plants have shown enhancements in plant biomass and stress alleviation under Pb influence. They thus serve a dual purpose for plants grown in Pb-contaminated areas. This review aims to offer a comprehensive understanding of the role played by Pb-resistant soil-borne indigenous bacteria in expediting bioremediation and improving the growth of Pb-challenged plants essential for potential field application, thus broadening prospects for future research and development.

Whole genome analyses of toxicants tolerance genes of Apis mellifera gut-derived Enterococcus faecium strains

BACKGROUND

Because of its social nature, the honeybee is regularly exposed to environmental toxicants such as heavy metals and xenobiotics. These toxicants are known to exert strong selective pressure on the gut microbiome's structure and diversity. For example, resistant microbial members are more likely to dominate in maintaining a stable microbiome, which is critical for bee health. Therefore, the aim of this study was to examine the Enterococcus faecium strains isolated from bee guts for their in vitro growth and tolerability to diverse heavy metals and xenobiotics. An additional aim was to analyze the genomes of E. faecium isolates to assess the molecular bases of resistance and compare them with E. faecium species isolated from other environmental sources.

RESULTS

The E. faecium bee isolates were able to tolerate high levels (up to 200 mg/L) of toxicants, including cadmium, zinc, benzoate, phenol and hexane. Moreover, the isolates could tolerate toluene and copper at up to 100 mg/L. The genome of E. faecium Am5, isolated from the larval stage of Apis mellifera gut, was about 2.7 Mb in size, had a GC content of 37.9% and 2,827 predicted coding sequences. Overall, the Am5 genome features were comparable with previously sequenced bee-gut isolates, E. faecium Am1, Bee9, SM21, and H7. The genomes of the bee isolates provided insight into the observed heavy metal tolerance. For example, heavy metal tolerance and/or regulation genes were present, including czcD (cobalt/zinc/cadmium resistance), cadA (exporting ATPase), cutC (cytoplasmic copper homeostasis) and zur (zinc uptake regulation). Additionally, genes associated with nine KEGG xenobiotic biodegradation pathways were detected, including γ-hexachlorocyclohexane, benzoate, biphenyl, bisphenol A, tetrachloroethene, 1,4-dichlorobenzene, ethylbenzene, trinitrotoluene and caprolactam. Interestingly, a comparative genomics study demonstrated the conservation of toxicant resistance genes across a variety of E. faecium counterparts isolated from other environmental sources such as non-human mammals, humans, avians, and marine animals.

CONCLUSIONS

Honeybee gut-derived E. faecium strains can tolerate a variety of heavy metals. Moreover, their genomes encode many xenobiotic biodegradation pathways. Further research is required to examine E. faecium strains potential to boost host resistance to environmental toxins.

Advances in bacterial whole-cell biosensors for the detection of bioavailable mercury: A review

Mercury (Hg) and its organic compounds, especially monomethylmercury (MeHg), cause major damage to the ecosystem and human health. In surface water or sediments, microorganisms play a crucial role in the methylation and demethylation of Hg. Given that Hg transformation processes are intracellular reactions, accurate assessment of the bioavailability of Hg(II)/MeHg in the environment, particularly for microorganisms, is of major importance. Compared with traditional analytical methods, bacterial whole-cell biosensors (BWCBs) provide a more accurate, convenient, and cost-effective strategy to assess the environmental risks of Hg(II)/MeHg. This Review summarizes recent progress in the application of BWCBs in the detection of bioavailable Hg(II)/MeHg, providing insight on current challenges and strategies. The principle and components of BWCBs for Hg(II)/MeHg bioavailability analysis are introduced. Furthermore, the impact of water chemical factors on the bioavailability of Hg is discussed as are future perspectives of BWCBs in bioavailable Hg analysis and optimization of BWCBs.

Duckweed: a potential phytosensor for heavy metals

Globally, heavy metal (HM) contamination is one of the primary causes of environmental pollution leading to decreased quality of life for those affected. In particular, HM contamination in groundwater poses a serious risk to human health and the potential for destabilization of aquatic ecosystems. At present, strategies to remove HM contamination from wastewater are inefficient, costly, laborious, and often the removal poses as much risk to the environment as the initial contamination. Phytoremediation, plant-based removal of contaminants from soil or water, has long been viewed as an economical and sustainable solution to remove toxic metals from the environment. However, to date, phytoremediation has demonstrated limited successes despite a large volume of literature supporting its potential. A key aspect for achieving robust and meaningful phytoremediation is the selection of a plant species that is well suited to the task. For the removal of pollutants from wastewater, hydrophytes, like duckweed, exhibit significant potential due to their rapid growth on nutrient-rich water, ease of collection, and ability to survive in various ecosystems. As a model for ecotoxicity studies, duckweed is an ideal candidate, as it is easy to cultivate under controlled and even sterile conditions, and the rapid growth enables multi-generational studies. Similarly, recent advances in the genetic engineering and genome-editing of duckweed will enable the transition from fundamental ecotoxicity studies to engineered solutions for phytoremediation of HMs. This review will provide insight into the suitability of duckweeds for phytoremediation of HMs and strategies for engineering next-generation duckweed to provide real-world environmental solutions.

Construction of luminescent Escherichia coli via expressing lux operons and their application on toxicity test

Recombinant luminescent Escherichia coli strains could be used to detect the toxicity of pure or mixed contaminants as a light-off sensor. In this work, the lux operon of Photobacterium phosphoreum T3 was identified for the first time. Recombinant luminescent E. coli strains were constructed via expressing the lux operons of P. phosphoreum T3 and Vibrio qinghaiensis Q67 in E. coli MG1655, and the optimal protectant containing 10% (w/v) trehalose and 4% sucrose was used to prepare the freeze-dried recombinant luminescent E. coli cells. Then, these freeze-dried E. coli cells were subjected to acute toxicity detection. The results showed that luminescent E. coli strains displayed sensitive toxic responses to BPA, nFe₂O₃, Cd, Pb, As, and Hg, for example, the EC₅₀ values of BPA and nFe₂O₃ to luminescent E. coli strains ranged from 1.54 to 50.19 mg/l and 17.50 to 21.52 mg/l, respectively. Indeed, luminescent E. coli strains exhibited more sensitive responses to Cd, Pb, and Hg than the natural strain Q67. The results suggested that recombinant luminescent E. coli strains could be used for the detection of acute toxicity. Furthermore, the combined toxicities of BPA and nFe₂O₃, Hg, and Pb were measured, and the joint effects of these mixtures were evaluated with luminescent E. coli. The results indicated that the joint effects of BPA and nFe₂O₃ suggested to be synergistic or additive to luminescent E. coli, while the joint effects of heavy metals and nFe₂O₃ exhibited additivities. The cellular endocytosis for Fe₂O₃ nanoparticles was not observed, which could explain the additive instead of synergistic effects between heavy metals and nFe₂O₃. KEY POINTS: • Sequence of the lux operon from P. phosphoreum T3 was reported for the first time. • Recombinant luminescent E. coli was more sensitive to Cd, Pb, and Hg than Q67. • Joint effects of BPA and nFe₂O₃ were synergistic or additive to luminescent E. coli.

Zinc Essentiality, Toxicity, and Its Bacterial Bioremediation: A Comprehensive Insight

Zinc (Zn) is one of the most abundantly found heavy metals in the Earth's crust and is reported to be an essential trace metal required for the growth of living beings, with it being a cofactor of major proteins, and mediating the regulation of several immunomodulatory functions. However, its essentiality also runs parallel to its toxicity, which is induced through various anthropogenic sources, constant exposure to polluted sites, and other natural phenomena. The bioavailability of Zn is attributable to various vegetables, beef, and dairy products, which are a good source of Zn for safe consumption by humans. However, conditions of Zn toxicity can also occur through the overdosage of Zn supplements, which is increasing at an alarming rate attributing to lack of awareness. Though Zn toxicity in humans is a treatable and non-life-threatening condition, several symptoms cause distress to human activities and lifestyle, including fever, breathing difficulty, nausea, chest pain, and cough. In the environment, Zn is generally found in soil and water bodies, where it is introduced through the action of weathering, and release of industrial effluents, respectively. Excessive levels of Zn in these sources can alter soil and aquatic microbial diversity, and can thus affect the bioavailability and absorption of other metals as well. Several Gram-positive and -negative species, such as Bacillus sp., Staphylococcus sp., Streptococcus sp., and Escherichia coli, Pseudomonas sp., Klebsiella sp., and Enterobacter sp., respectively, have been reported to be promising agents of Zn bioremediation. This review intends to present an overview of Zn and its properties, uses, bioavailability, toxicity, as well as the major mechanisms involved in its bioremediation from polluted soil and wastewaters.

Design of Pb(II)-Specific E. coli-Based Biosensors by Engineering Regulatory Proteins and Host Cells

Bacterial cell-based biosensors have been widely developed for detecting environmental toxic materials. The znt-operon in Escherichia coli is a Zn(II)-responsive genetic system and is employed in Zn(II), Cd(II), and Hg(II)-sensing biosensors. In this study, point mutations were introduced in the regulatory protein ZntR to modulate its target selectivity, and metal ion-exporting genes, such as copA and zntA, in host cells were deleted to increase cellular metal ion levels and enhance specificity. Thus, the overall responses of the E. coli cell-based biosensors toward metal(loid) ions were increased, and their selectivity, which was originally for Cd(II) and Hg(II), was shifted to Pb(II). The gene encoding ZntA, known as the Zn(II)-translocating P-type ATPase, showed an impact on the ability of E. coli to export Pb(II), whereas copA deletion showed no significant impact. Noteworthily, the newly generated biosensors employing ZntR Cys115Ile showed the capacity to detect under 5 nM Pb(II) in solution, without response to other tested metal ions within 0–100 nM. To understand the marked effect of single point mutations on ZntR, computational modeling was employed. Although it did not provide clear answers, changes in the sequences of the metal-binding loops of ZntR modulated its transcriptional strength and target selectivity. In summary, the approaches proposed in this study can be valuable to generate new target-sensing biosensors with superior selectivity and specificity, which can in turn broaden the applicability of cell-based biosensors to monitor Pb(II) in environmental systems.

Construction of cadmium whole-cell biosensors and circuit amplification

Owing to the prevalence of cadmium contamination and its serious hazards, it is important to establish an efficient and low-cost monitoring technique for the detection of the heavy metal cadmium. In this study, we first designed 30 cadmium whole-cell biosensors (WCBs) using different combinations of detection elements, reporting elements, and the host. The best performing WCB KT-5-R with Pseudomonas putida KT2440 as the host and composed of CadR and mCherry was selected for further analysis and engineering. In order to enhance its sensitivity, a positive feedback amplifier was added or the gene dosage of the reporter gene was increased. The WCB with the T7RNAP amplification module, p2T7RNAPmut-68, had the best performance and improved tolerance to cadmium with a detection limit of 0.01 μM, which is the WHO standard. It also showed excellent specificity toward cadmium when assayed with mixed metal ions. This study demonstrated the power of circuit engineering in WCB design and provided valuable insights for the development of other WCBs. KEY POINTS: • KT-5-R was selected after prescreening and engineered for better performance. • Using multi-copy reporters and the T7RNAP amplifier greatly improved the performance. • p2T7RNAPmut-68 had a detection limit of 0.01 μM and improved tolerance to cadmium.

Sensitive and Specific Cadmium Biosensor Developed by Reconfiguring Metal Transport and Leveraging Natural Gene Repositories

Whole-cell biosensors are useful for monitoring heavy metal toxicity in public health and ecosystems, but their development has been hindered by intrinsic trade-offs between sensitivity and specificity. Here, we demonstrated an effective engineering solution by building a sensitive, specific, and high-response biosensor for carcinogenic cadmium ions. We genetically programmed the metal transport system of Escherichia coli to enrich intracellular cadmium ions and deprive interfering metal species. We then selected 16 cadmium-sensing transcription factors from the GenBank database and tested their reactivity to 14 metal ions in the engineered E. coli using the expression of the green fluorescent protein as the readout. The resulting cadmium biosensor was highly specific and showed a detection limit of 3 nM, a linear increase in fluorescent intensities from 0 to 200 nM, and a maximal 777-fold signal change. Using this whole-cell biosensor, a smartphone, and low-tech equipment, we developed a simple assay capable of measuring cadmium ions at the same concentration range in irrigation water and human urine. This method is user-friendly and cost-effective, making it affordable to screen large amounts of samples for cadmium toxicity in agriculture and medicine. Moreover, our work highlights natural gene repositories as a treasure chest for bioengineering.

Genome-wide gene-deletion screening identifies mutations that significantly enhance explosives vapor detection by a microbial sensor

Genetically engineered microbial biosensors, capable of detecting traces of explosives residues above buried military ordnance and emitting an optical signal in response, may potentially serve for the standoff detection of buried landmines. A promising candidate for such an application is a previously reported Escherichia coli-based reporter strain that employs the yqjF gene promoter as its sensing element; however, for this sensor to be able to detect actual landmines reliably, it was necessary for its detection sensitivity and signal intensity to be enhanced. In this study, a high-throughput approach was employed to screen the effects of individual gene deletions on yqjF activation by 2,4-dinitrotoluene (DNT). Several genes were identified, the deletion of which elicited a significant enhancement of yqjF induction by DNT. The most promising of these mutations were introduced into the sensor strain, individually or in pairs, yielding a considerable increase in signal intensity and a lowering of the detection threshold. A strain harboring two of the identified mutations, ygdD and eutE, appears to be the most sensitive microbial biosensor currently described for the detection of traces of landmine explosives.

Long-term application of Swedish sewage sludge on farmland does not cause clear changes in the soil bacterial resistome

The widespread practice of applying sewage sludge to arable land makes use of nutrients indispensable for crops and reduces the need for inorganic fertilizer, however this application also provides a potential route for human exposure to chemical contaminants and microbial pathogens in the sludge. A recent concern is that such practice could promote environmental selection and dissemination of antibiotic resistant bacteria or resistance genes. Understanding the risks of sludge amendment in relation to antibiotic resistance development is important for sustainable agriculture, waste treatment and infectious disease management. To assess such risks, we took advantage of an agricultural field trial in southern Sweden, where land used for growing different crops has been amended with sludge every four years since 1981. We sampled raw, semi-digested and digested and stored sludge together with soils from the experimental plots before and two weeks after the most recent amendment in 2017. Levels of selected antimicrobials and bioavailable metals were determined and microbial effects were evaluated using both culture-independent metagenome sequencing and conventional culturing. Antimicrobials or bioavailable metals (Cu and Zn) did not accumulate to levels of concern for environmental selection of antibiotic resistance, and no coherent signs, neither on short or long time scales, of enrichment of antibiotic-resistant bacteria or resistance genes were found in soils amended with digested and stored sewage sludge in doses up to 12 metric tons per hectare. Likewise, only very few and slight differences in microbial community composition were observed after sludge amendment. Taken together, the current study does not indicate risks of sludge amendment related to antibiotic resistance development under the given conditions. Extrapolations should however be done with care as sludge quality and application practices vary between regions. Hence, the antibiotic concentrations and resistance load of the sludge are likely to be higher in regions with larger antibiotic consumption and resistance burden than Sweden.

Rhizoremediation of Cu(II) ions from contaminated soil using plant growth promoting bacteria: an outlook on pyrolysis conditions on plant residues for methylene orange dye biosorption

Rhizoremediation is one of the most accepted, cost-effective bioremediation techniques focusing on the application of rhizospheric microorganisms in combination with plants for the remediation of organic and inorganic pollutants from the contaminated sites. This work focuses on isolation and identification of metal resistant bacteria to grow on medium with the copper ion concentration of 1500 mg/L. The resistant isolate was identified as Pantoea dispersa by a 16S rRNA sequencing. The bioaccumulation of Cu(II) ions in plant is high at the concentration of Cu(II) ion is 125 mg/L in soil. In Sphaeranthus indicus the Cu(II) ion translocation factor has expanded with an expansion of grouping of Cu(II) ion in the soil and the most extreme TF factor was acquired at the centralization of Cu(II) ion is 150 mg/L in soil. Surface morphology of biochar was characterized by Scanning Electron Microscopy (SEM) analysis. The adsorption performance of biochar (Sphaeranthus indicus biomass) and mechanism for the removal of Cu(II) ion were investigated. This study resolves that pyrolysis is promising technology for the conversion of metal ion contaminated plant residues from phytoremediation into valuable products.

Development of a Sensitive Escherichia coli Bioreporter Without Antibiotic Markers for Detecting Bioavailable Copper in Water Environments

The whole-cell bioreporters based on the cop-operon sensing elements have been proven specifically useful in the assessment of bioavailable copper ions in water environments. In this study, a series of experiments was conducted to further improve the sensitivity and robustness of bioreporters. First, an Escherichia coli △copA△cueO△cusA mutant with three copper transport genes knocked out was constructed. Then, the copAp::gfpmut2 sensing element was inserted into the chromosome of E. coli △copA△cueO△cusA by gene knock-in method to obtain the bioreporter strain E. coli WMC-007. In optimized assay conditions, the linear detection range of Cu²⁺ was 0.025–5 mg/L (0.39–78.68 μM) after incubating E. coli WMC-007 in Luria–Bertani medium for 5 h. The limit of detection of Cu²⁺ was 0.0157 mg/L (0.25 μM). Moreover, fluorescence spectrometry and flow cytometry experiments showed more environmental robustness and lower background fluorescence signal than those of the sensor element based on plasmids. In addition, we found that the expression of GFPmut2 in E. coli WMC-007 was induced by free copper ions, rather than complex-bound copper, in a dose-dependent manner. Particularly, the addition of 40 mM 3-(N-Morpholino)propanesulfonic acid buffer to E. coli WMC-007 culture enabled accurate quantification of bioavailable copper content in aqueous solution samples within a pH range from 0.87 to 12.84. The copper recovery rate was about 95.88–113.40%. These results demonstrate potential applications of E. coli WMC-007 as a bioreporter to monitor copper contamination in acidic mine drainage, industrial wastewater, and drinking water. Since whole-cell bioreporters are relatively inexpensive and easy to operate, the combination of this method with other physicochemical techniques will in turn provide more specific information on the degree of toxicity in water environments.

Advances in characterizing microbial community change and resistance upon exposure to lead contamination: Implications for ecological risk assessment

Recent advancement in molecular techniques has spurred waves of studies on responses of microorganisms to lead contamination exposure, leveraging detailed phylogenetic analyses and functional gene identification to discern the effects of lead toxicity on microbial communities. This work provides a comprehensive review of recent research on (1) microbial community changes in contaminated aquatic sediments and terrestrial soils; (2) lead resistance mechanisms; and (3) using lead resistance genes for lead biosensor development. Sufficient evidence in the literature, including both in vitro and in situ studies, indicates that exposure to lead contamination inhibits microbial activity resulting in reduced respiration, suppressed metabolism, and reduced biomass as well as altered microbial community structure. Even at sites where microbial communities do not vary compositionally with contamination levels due to extremely long periods of exposure, functional differences between microbial communities are evident, indicating that some microorganisms are susceptible to lead toxicity as others develop resistance mechanisms to survive in lead contaminated environments. The main mechanisms of lead resistance involve extracellular and intracellular biosorption, precipitation, complexation, and/or efflux pumps. These lead resistance mechanisms are associated with suites of genes responsible for specific lead resistance mechanisms and may serving as indicators of lead contamination in association with dominance of certain phyla. This allows for development of several lead biosensors in environmental biotechnology. To promote applications of these advanced understandings, molecular techniques, and lead biosensor technology, perspectives of future work on using microbial indicators for site ecological assessment is presented.

Heavy metal pollution and co-selection for antibiotic resistance: A microbial palaeontology approach

Frequent and persistent heavy metal pollution has profound effects on the composition and activity of microbial communities. Heavy metals select for metal resistance but can also co-select for resistance to antibiotics, which is a global health concern. We here document metal concentration, metal resistance and antibiotic resistance along a sediment archive from a pond in the North West of the United Kingdom covering over a century of anthropogenic pollution. We specifically focus on zinc, as it is a ubiquitous and toxic metal contaminant known to co-select for antibiotic resistance, to assess the impact of temporal variation in heavy metal pollution on microbial community diversity and to quantify the selection effects of differential heavy metal exposure on antibiotic resistance. Zinc concentration and bioavailability was found to vary over the core, likely reflecting increased industrialisation around the middle of the 20th century. Zinc concentration had a significant effect on bacterial community composition, as revealed by a positive correlation between the level of zinc tolerance in culturable bacteria and zinc concentration. The proportion of zinc resistant isolates was also positively correlated with resistance to three clinically relevant antibiotics (oxacillin, cefotaxime and trimethoprim). The abundance of the class 1 integron-integrase gene, intI1, marker for anthropogenic pollutants correlated with the prevalence of zinc- and cefotaxime resistance but not with oxacillin and trimethoprim resistance. Our microbial palaeontology approach reveals that metal-contaminated sediments from depths that pre-date the use of antibiotics were enriched in antibiotic resistant bacteria, demonstrating the pervasive effects of metal-antibiotic co-selection in the environment.

Biodetection and bioremediation of copper ions in environmental water samples using a temperature-controlled, dual-functional Escherichia coli cell

Although a variety of whole-cell biosensors and biosorbents have been developed for detection and removal of heavy metal contaminants, few whole cells can be applied to both monitoring and remediation of copper pollution in water. In this study, a modified plasmid was constructed by incorporating a copper-sensing element and a copper-adsorbing element into a temperature-inducible plasmid, pBV220. This plasmid was subsequently transformed into an engineered Escherichia coli strain lacking copA and cueO. This dual-functional E. coli cell selectively responded to copper ions with a linear detection range of 0.01-25 μM at 37 °C and could express surface-displayed CueR when treated at 42 °C without any costly chemical inducers. The display of CueR on the cell surface specifically enhanced its copper adsorption capacity and rapidly removed copper ions from aqueous solutions. In addition, the CueR surface-displayed cells could be regenerated by adsorption-desorption cycles via pH regulation. Moreover, by simply using two different temperatures, the detection or adsorption of copper using this dual-functional whole cell was achieved without any cross-interference. Most importantly, it provided highly sensitive, accurate quantification, and effective removal of copper in real environmental water samples. Thus, this E. coli cell can be used for large-scale detection and remediation of copper pollutants.

Sensitive and Specific Whole-Cell Biosensor for Arsenic Detection

Whole-cell biosensors (WCBs) have been designed to detect As(III), but most suffer from poor sensitivity and specificity. In this paper, we developed an arsenic WCB with a positive feedback amplifier in Escherichia coli DH5α. The output signal from the reporter mCherry was significantly enhanced by the positive feedback amplifier. The sensitivity of the WCB with positive feedback is about 1 order of magnitude higher than that without positive feedback when evaluated using a half-saturation As(III) concentration. The minimum detection limit for As(III) was reduced by 1 order of magnitude to 0.1 µM, lower than the World Health Organization standard for the arsenic level in drinking water, 0.01 mg/liter or 0.13 µM. Due to the amplification of the output signal, the WCB was able to give detectable signals within a shorter period, and a fast response is essential for in situ operations. Moreover, the WCB with the positive feedback amplifier showed exceptionally high specificity toward As(III) when compared with other metal ions. Collectively, the designed positive feedback amplifier WCB meets the requirements for As(III) detection with high sensitivity and specificity. This work also demonstrates the importance of genetic circuit engineering in designing WCBs, and the use of genetic positive feedback amplifiers is a good strategy to improve the performance of WCBs.IMPORTANCE Arsenic poisoning is a severe public health issue. Rapid and simple methods for the sensitive and specific monitoring of arsenic concentration in drinking water are needed. In this study, we designed an arsenic WCB with a positive feedback amplifier. It is highly sensitive and able to detect arsenic below the WHO limit level. In addition, it also significantly improves the specificity of the biosensor toward arsenic, giving a signal that is about 10 to 20 times stronger in response to As(III) than to other metals. This work not only provides simple but effective arsenic biosensors but also demonstrates the importance of genetic engineering, particularly the use of positive feedback amplifiers, in designing WCBs.

Enhanced sensitivity and responses to viologens from a whole-cell bacterial bioreporter treated with branched polyethyleneimines

AIMS

Evaluate the use of polyethyleneimines (PEIs) as membrane permeabilizers to improve the responses and sensitivity of a bacterial bioreporter strain to viologens.

METHODS AND RESULTS

The responses from E. coli str. EBS, i.e., E. coli BW25113 carrying plasmid pSDS, when exposed to five different viologens were characterized, as were the toxicities of seven different PEIS, including two linear and five branched species. Based on these results, benzyl viologen led to the greatest responses, and 0·8-kDa branched PEI (BPEI) was the least toxic of the PEIs tested and, therefore, both were selected for the subsequent tests. The bioluminescence and relative responses from E. coli str. EBS exposed to various concentrations of 0·8 kDa BPEI identified 400 mg l^-1 as the optimal concentration. Using this concentration, tests were performed with all five of the viologens.

CONCLUSIONS

The responses from E. coli str. EBS to the viologens were improved, with the maximum relative bioluminescence values increasing between 5·6 and 16·5-fold. The minimum detectable levels for four of the viologens were likewise improved 2- to 4-fold.

SIGNIFICANCE AND IMPACT OF STUDY

Improving bacterial membrane permeability in a controlled manner using BPEIs can improve biosensing of toxic compounds, as well as be used in biofuel and bioenergy applications where membrane permeability to a solute is important.

Comparison of Metals and Tetracycline as Selective Agents for Development of Tetracycline Resistant Bacterial Communities in Agricultural Soil

Environmental selection of antibiotic resistance may be caused by either antibiotic residues or coselecting agents. Using a strictly controlled experimental design, we compared the ability of metals (Cu or Zn) and tetracycline to (co)select for tetracycline resistance in bacterial communities. Soil microcosms were established by amending agricultural soil with known levels of Cu, Zn, or tetracycline known to represent commonly used metals and antibiotics for pig farming. Soil bacterial growth dynamics and bacterial community-level tetracycline resistance were determined using the [³H]leucine incorporation technique, whereas soil Cu, Zn, and tetracycline exposure were quantified by a panel of whole-cell bacterial bioreporters. Tetracycline resistance increased significantly in soils containing environmentally relevant levels of Cu (≥365 mg kg^-1) and Zn (≥264 mg kg^-1) but not in soil spiked with unrealistically high levels of tetracycline (up to 100 mg kg^-1). These observations were consistent with bioreporter data showing that metals remained bioavailable, whereas tetracycline was only transiently bioavailable. Community-level tetracycline resistance was correlated to the initial toxicant-induced inhibition of bacterial growth. In conclusion, our study demonstrates that toxic metals in some cases may exert a stronger selection pressure for environmental selection of resistance to an antibiotic than the specific antibiotic itself.

Impact of intracellular metallothionein on metal biouptake and partitioning dynamics at bacterial interfaces

This study reports the quantitative evaluation of the metal biopartitioning dynamics following biouptake at bacterial interfaces with explicit account of the effects stemming from intracellular metal binding by metallothionein proteins.

New family of biosensors for monitoring BTX in aquatic and edaphic environments

Benzene, toluene, ethylbenzene and xylenes (BTEX) contamination is a serious threat to public health and the environment, and therefore, there is an urgent need to detect its presence in nature. The use of whole-cell reporters is an efficient, easy-to-use and low-cost approach to detect and follow contaminants outside specialized laboratories; this is especially important in oil spills that are frequent in marine environments. The aim of this study is the construction of a bioreporter system and its comparison and validation for the specific detection of monocyclic aromatic hydrocarbons in different host bacteria and environmental samples. Our bioreporter system is based on the two component regulatory system TodS-TodT of P. putida DOT-T1E, and the PtodX promoter fused to the GFP protein as the reporter protein. For the construction of different biosensors, this bioreporter was transferred into three different bacterial strains isolated from three different environments, and their performance was measured. Validation of the biosensors on water samples spiked with petrol, diesel and crude oil on contaminated waters from oil spills and on contaminated soils demonstrated that they can be used in mapping and monitoring some BTEX compounds (specifically benzene, toluene and two xylene isomers). Validation of biosensors is an important issue for the integration of these devices into pollution-control programmes.

Use of Tunable Whole-Cell Bioreporters to Assess Bioavailable Cadmium and Remediation Performance in Soils

It is important to have tools to measure the bioavailability to assess the risks of pollutants because the bioavailability is defined as the portions of pollutants showing the biological effects on living organisms. This study described the construction of tunable Escherichia coli whole-cell bioreporter (WCB) using the promoter region of zinc-inducible operon and its application on contaminated soils. It was verified that this WCB system showed specific and sensitive responses to cadmium rather than zinc in the experimental conditions. It was inferred that Cd(II) associates stronger with ZntR, a regulatory protein of zinc-inducible operon, than other metal ions. Moreover, the expression of reporter genes, egfp and mcherry, were proportional to the concentration of cadmium, thereby being a quantitative sensor to monitor bioavailable cadmium. The capability to determine bioavailable cadmium was verified with Cd(II) amended LUFA soils, and then the applicability on environmental systems was investigated with field soils collected from smelter area in Korea before and after soil-washing. The total amount of cadmium was decreased after soil washing, while the bioavailability was increased. Consequently, it would be valuable to have tools to assess bioavailability and the effectiveness of soil remediation should be evaluated in the aspect of bioavailability as well as removal efficiency.

Detection of Metal and Organometallic Compounds with Bioluminescent Bacterial Bioassays

Chemical detection of metal and organometallic compounds is very specific and sensitive, but these techniques are time consuming and expensive. Although these techniques provide information about the concentrations of compounds, they fail to inform us about the toxicity of a sample. Because the toxic effects of metals and organometallic compounds are influenced by a multitude of environmental factors, such as pH, the presence of chelating agents, speciation, and organic matter, bioassays have been developed for ecotoxicological studies. Among these bioassays, recombinant luminescent bacteria have been developed over the past 20 years, and many of them are specific for the detection of metals and metalloids. These bioassays are simple to use, are inexpensive, and provide information on the bioavailable fraction of metals and organometals. Thus, they are an essential complementary tool for providing information beyond chemical analysis. In this chapter, we propose to investigate the detection of metals and organometallic compounds with bioluminescent bacterial bioassays and the applications of these bioassays to environmental samples. Graphical Abstract.

Application of internal standard method in recombinant luminescent bacteria test

Mercury and its organic compounds have been of severe concern worldwide due to their damage to the ecosystem and human health. The development of effective and affordable technology to monitor and signal the presence of bioavailable mercury is an urgent need. The Mer gene is a mercury-responsive resistant gene, and a mercury-sensing recombinant luminescent bacterium using the Mer gene was constructed in this study. The mer operon from marine Pseudomonas putida strain SP1 was amplified and fused with prompterless luxCDABE in the pUCD615 plasmid within Escherichia coli cells, resulting in pTHE30-E. coli. The recombinant strain showed high sensitivity and specificity. The detection limit of Hg(2+) was 5nmol/L, and distinct luminescence could be detected in 30min. Cd(2+), Cu(2+), Zn(2+), Ca(2+), Pb(2+), Mg(2+), Mn(2+), and Al(3+) did not interfere with the detection over a range of 10(-5)-1mM. Application of recombinant luminescent bacteria testing in environmental samples has been a controversial issue: especially for metal-sensing recombinant strains, false negatives caused by high cytotoxicity are one of the most important issues when applying recombinant luminescent bacteria in biomonitoring of heavy metals. In this study, by establishing an internal standard approach, the false negative problem was overcome; furthermore, the method can also help to estimate the suspected mercury concentration, which ensures high detection sensitivity of bioavailable Hg(2+).

High-throughput prescreening of pharmaceuticals using a genome-wide bacterial bioreporter array

We assessed the applicability of multi-strain bacterial bioreporter bioassays to drug screening. To this end, we investigated the reactions of a panel of 15 luminescent recombinant Escherichia coli bacterial bioreporters to a library of 420 pharmaceuticals. The panel included bacterial bioreporters associated with oxidative stress, DNA damage, heat shock, and efflux of excess metals. Eighty nine drugs elicited a response from at least one of the panel members and formed distinctive clusters, some of which contained closely related drugs. In addition, we tested a group of selected nine drugs against a collection of about 2000 different fluorescent transcriptional reporters that covers the great majority of gene promoters in E. coli. The sets of induced genes were in accord with the in vitro toxicity of the tested drugs, as reflected by the response patterns of the 15-member panel, and provided more insights into their toxicity mechanisms. Facilitated by microplates and robotic systems, all assays were conducted in high-throughput. Our results thus suggest that multi-strain assemblages of bacterial bioreporters have the potential for playing a significant role in drug development alongside current in vitro toxicity tests.

Evaluation of metal biouptake from the analysis of bulk metal depletion kinetics at various cell concentrations: theory and application

Bioavailability of trace metals is a key parameter for assessment of toxicity on living organisms. Proper evaluation of metal bioavailability requires monitoring the various interfacial processes that control metal partitioning dynamics at the biointerface, which includes metal transport from solution to cell membrane, adsorption at the biosurface, internalization, and possible excretion. In this work, a methodology is proposed to quantitatively describe the dynamics of Cd(II) uptake by Pseudomonas putida. The analysis is based on the kinetic measurement of Cd(II) depletion from bulk solution at various initial cell concentrations using electroanalytical probes. On the basis of a recent formalism on the dynamics of metal uptake by complex biointerphases, the cell concentration-dependent depletion time scales and plateau values reached by metal concentrations at long exposure times (>3 h) are successfully rationalized in terms of limiting metal uptake flux, rate of excretion, and metal affinity to internalization sites. The analysis shows the limits of approximate depletion models valid in the extremes of high and weak metal affinities. The contribution of conductive diffusion transfer of metals from the solution to the cell membrane in governing the rate of Cd(II) uptake is further discussed on the basis of estimated resistances for metal membrane transfer and extracellular mass transport.

Cadmium-resistance mechanism in the bacteria Cupriavidus metallidurans CH34 and Pseudomonas putida mt2

Cupriavidus metallidurans CH34 and Pseudomonas putida mt2 were used as cadmium (Cd)-resistant and -sensitive bacteria, respectively, to study Cd uptake, sorption, intracellular accumulation, metallothionein (MT) induction, and bioremediation potential of both isolates. According to this research work, Cd had a stimulatory effect on the growth of CH34 cells (OD578 = 1.43) compared with mt2 cells (OD578 = 0.8). Addition of N,N'-dicyclohexylcarbodiimide (DCCD) and 2,4-dinitrophenol (DNP) along with Cd resulted in more cell growth in mt2 (OD578 = 0.71) compared with CH34 (OD578 = 0.34). DCCD and DNP inhibited this active uptake only in CH34 but not in mt2. Greater Cd interaction with the cell surface was observed in mt2 cells compared with CH34 cells. Intracellular Cd accumulation was interrupted by DCCD and DNP in CH34 (only 1.81 ± 0.04 μg L(-1) at 5 h) but not in mt2 (24.41 ± 0.01 μg L(-1) at 5 h). Intracellular Cd uptake was observed in even killed mt2 cells (7.11 ± 0.05 μg L(-1) at 5 h) compared with CH34 cells (2.50 ± 0.08 μg L(-1) at 5 h). This result showed that the Cd accumulation mechanism in CH34 is ATPase-dependent, whereas in mt2 uptake mechanism is not ATPase-dependent because mt2 ATPase was not inhibited by DCCD and DNP. CH34 removed 93 mg L(-1) of Cd after 8 days from original industrial effluent, which was more than Cd removal by CH34 from distilled water (i.e. 90 mg L(-1) after 8 days). mt2 was able to remove 80 mg L(-1) of Cd after 8 days from original industrial effluent, which was more than Cd removal by mt2 from distilled water (i.e. 77 mg L(-1) after 8 days). Cd did not induce any MT in CH34, but it did so in mt2 (14 kDa), which was thought to be a Cd-resistance mechanism operative in mt2.

Probiotics in fish and shellfish culture: immunomodulatory and ecophysiological responses

Aquaculture is emerging as one of the most viable and promising enterprises for keeping pace with the surging need for animal protein, providing nutritional and food security to humans, particularly those residing in regions where livestock is relatively scarce. With every step toward intensification of aquaculture practices, there is an increase in the stress level in the animal as well as the environment. Hence, disease outbreak is being increasingly recognized as one of the most important constraints to aquaculture production in many countries, including India. Conventionally, the disease control in aquaculture has relied on the use of chemical compounds and antibiotics. The development of non-antibiotic and environmentally friendly agents is one of the key factors for health management in aquaculture. Consequently, with the emerging need for environmentally friendly aquaculture, the use of alternatives to antibiotic growth promoters in fish nutrition is now widely accepted. In recent years, probiotics have taken center stage and are being used as an unconventional approach that has numerous beneficial effects in fish and shellfish culture: improved activity of gastrointestinal microbiota and enhanced immune status, disease resistance, survival, feed utilization and growth performance. As natural products, probiotics have much potential to increase the efficiency and sustainability of aquaculture production. Therefore, comprehensive research to fully characterize the intestinal microbiota of prominent fish species, mechanisms of action of probiotics and their effects on the intestinal ecosystem, immunity, fish health and performance is reasonable. This review highlights the classifications and applications of probiotics in aquaculture. The review also summarizes the advancement and research highlights of the probiotic status and mode of action, which are of great significance from an ecofriendly, sustainable, intensive aquaculture point of view.

Monitoring bisphenol A and estrogenic chemicals in thermal paper with yeast-based bioreporter assay

Bioluminescent Saccharomyces cerevisiae yeast-based bioreporters were used to monitor bisphenol A and other estrogenic chemicals in thermal paper samples collected mainly from Finland on two occasions in 2010/2011, and 2013. The bisphenol A-targeted (BPA-R) and the human oestrogen receptor (hERα) bioreporters were applied to analyse both non-treated and extracted paper samples. Bisphenol A was readily bioavailable to the yeast bioreporters on the non-treated paper samples without any pre-treatment. Detected concentrations ranged from a detection limit of 9-142 μg/g to over 20 mg/g of bisphenol A equivalents in the thermal papers. Low bisphenol A like activities were detected in many samples, and were considered to be caused by residual bisphenol A or other types of bisphenols, such as bisphenol S. Most of the thermal paper samples were toxic to the yeast bioreporters. The toxicity did not, however, depend on the bisphenol A concentration of the samples. The yeast bioreporters were demonstrated to be a robust and cost-efficient method to monitor thermal paper samples for their bisphenol A content and estrogenicity. Thermal paper was considered as a potential BPA source for both human exposure and environmental emission.

Components from wheat roots modify the bioactivity of ZnO and CuO nanoparticles in a soil bacterium

ZnO and CuO nanoparticles (NPs) have widespread commercial uses and their impact on agricultural systems is unresolved. This study examined whether the metabolites washed from wheat (Triticum aestivum L.) roots modulated the metabolic response to the NPs of a biosensor generated in the root colonizer, Pseudomonas putida KT2440. The root wash components boosted light output of the biosensor consistent with their catabolism. Dose-dependent and rapid inhibition of cell metabolism occurred with both ZnO and CuO NPs in water suspensions but high light output was maintained in root wash. Root wash also protected biosensor output in challenges with Zn ions. However the root wash components did not protect culturability or biosensor light output upon exposure to Cu ions. Imaging by atomic force microscopy suggested that root wash materials coated the NPs. We deduced that the response of a microbe to these metal oxide NPs could be negated by components released from roots.

Molecular manipulations for enhancing luminescent bioreporters performance in the detection of toxic chemicals

Microbial whole-cell bioreporters are genetically modified microorganisms that produce a quantifiable output in response to the presence of toxic chemicals or other stress factors. These bioreporters harbor a genetic fusion between a sensing element (usually a gene regulatory element responsive to the target) and a reporter element, the product of which may be quantitatively monitored either by its presence or by its activity. In this chapter we review genetic manipulations undertaken in order to improve bioluminescent bioreporter performance by increasing luminescent output, lowering the limit of detection, and shortening the response time. We describe molecular manipulations applied to all aspects of whole-cell bioreporters: the host strain, the expression system, the sensing element, and the reporter element. The molecular construction of whole-cell luminescent bioreporters, harboring fusions of gene promoter elements to reporter genes, has been around for over three decades; in most cases, these two genetic elements are combined "as is." This chapter outlines diverse molecular manipulations for enhancing the performance of such sensors.

Lead resistant bacteria: lead resistance mechanisms, their applications in lead bioremediation and biomonitoring

Lead (Pb) is non-bioessential, persistent and hazardous heavy metal pollutant of environmental concern. Bioremediation has become a potential alternative to the existing technologies for the removal and/or recovery of toxic lead from waste waters before releasing it into natural water bodies for environmental safety. To our best knowledge, this is a first review presenting different mechanisms employed by lead resistant bacteria to resist high levels of lead and their applications in cost effective and eco-friendly ways of lead bioremediation and biomonitoring. Various lead resistant mechanisms employed by lead resistant bacteria includes efflux mechanism, extracellular sequestration, biosorption, precipitation, alteration in cell morphology, enhanced siderophore production and intracellular lead bioaccumulation.

Bioluminescent yeast assay for detection of organotin compounds

Organotin compounds are toxic and endocrine disrupting compounds, which have been intensively used as antifouling paints for ship hulls and thus are widely spread in the environment. They are suspected to cause imposex, the formation of male characteristics in female gastropods, because of the activation of retinoid X receptor (RXR) at very low environmental concentrations. Here we report the development and optimization of a bioluminescent yeast assay for the detection of organotin compounds based on the interaction with a hybrid RXR and subsequent expression of a reporter luciferase gene. This assay is highly specific toward organotin compounds and natural ligands of the RXR. It detects tributyltin and triphenyltin in nanomolar concentrations (detection limits were found to be 30 nM and 110 nM, respectively) and allows small-scale high-throughput analyses. Furthermore it was possible to measure tributyltin directly in untreated spiked sediments. Thus, the results provided within one working day can be used for the assessment of bioavailability and mixture effect of organotin compounds in environmental samples.

Integrated perspective for effective bioremediation

Identification of factors which can influence the natural attenuation process with available microbial genetic capacities can support the bioremediation which has been viewed as the safest procedure to combat with anthropogenic compounds in ecosystems. With the advent of molecular techniques, assimilatory capacity of an ecosystem can be defined with changing community dynamics, and if required, the essential genetic potential can be met through bioaugmentation. At the same time, intensification of microbial processes with nutrient balancing, expressing and enhancing the degradative capacities, could reduce the time frame of restoration of the ecosystem. The new concept of ecosystems biology has added greatly to conceptualize the networking of the evolving microbiota of the niche that helps in effective application of bioremediation tools to manage pollutants as additional carbon source.

Analytical strategies for improving the robustness and reproducibility of bioluminescent microbial bioreporters

Whole-cell bioluminescent (BL) bioreporter technology is a useful analytical tool for developing biosensors for environmental toxicology and preclinical studies. However, when applied to real samples, several methodological problems prevent it from being widely used. Here, we propose a methodological approach for improving its analytical performance with complex matrix. We developed bioluminescent Escherichia coli and Saccharomyces cerevisiae bioreporters for copper ion detection. In the same cell, we introduced two firefly luciferases requiring the same luciferin substrate emitting at different wavelengths. The expression of one was copper ion specific. The other, constitutively expressed, was used as a cell viability internal control. Engineered BL cells were characterized using the noninvasive gravitational field-flow fractionation (GrFFF) technique. Homogeneous cell population was isolated. Cells were then immobilized in a polymeric matrix improving cell responsiveness. The bioassay was performed in 384-well black polystyrene microtiter plates directly on the sample. After 2 h of incubation at 37 °C and the addition of the luciferin, we measured the emitted light. These dual-color bioreporters showed more robustness and a wider dynamic range than bioassays based on the same strains with a single reporter gene and that uses a separate cell strain as BL control. The internal correction allowed to accurately evaluate the copper content even in simulated toxic samples, where reduced cell viability was observed. Homogenous cells isolated by GrFFF showed improvement in method reproducibility, particularly for yeast cells. The applicability of these bioreporters to real samples was demonstrated in tap water and wastewater treatment plant effluent samples spiked with copper and other metal ions.