Block iliac bone grafting enhances osseous healing of alveolar reconstruction in older cleft patients: A radiological and histological evaluation

Effectiveness of pre-alveolar bone graft orthodontics for patients with non-syndromic complete unilateral cleft lip, alveolus and palate: A systematic review and meta-analysis

The aim of this systematic review was to compare the effectiveness of pre-alveolar bonegraft (ABG) orthodontics with no orthodontic treatment for patients with non-syndromic unilateral cleft lip, alveolus and palate. All relevant studies from 1946 to October 30, 2022, were identified using several sources including The Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials (CENTRAL), LILACS, Scopus, EMBASE, MEDLINE (Ovid) and EPUB ahead of publications and non-indexed citations. Randomized Controlled Trials (RCT) and Controlled Clinical Trials (CCT) were included.

POPULATION

Non-syndromic complete unilateral cleft lip, alveolus and palate patients who have had ABG surgery.

INTERVENTION

Orthodontics prior to ABG. Comparison: No orthodontic treatment prior to ABG.

PRIMARY OUTCOME

Successful eruption of permanent canines. All articles were screened for the title, abstract and full text independently and in duplicate by 2 reviewers. The quality assessment of RCT was performed using Cochrane's risk of bias tool and the CCT was assessed using ROBINS-I tool. Of the 904 studies retrieved in the search, one RCT and one CCT were included. Both studies were judged as high risk of bias. The results from one study showed a statistically significant increase in bone volume and decreased bone defect post-ABG in the orthodontic treatment group. However, there was no difference with respect to other variables. Both included studies were of low quality. There is not enough evidence to recommend orthodontic treatment pre-ABG for patients with complete unilateral cleft lip, alveolus and palate. Future high-quality studies are required to inform patients and clinicians about the effectiveness of pre-graft orthodontic treatment.

Evaluation of maxillary alveolar ridge formation and ridge continuity after secondary alveolar bone grafting using cancellous and cortico-cancellous bone graft in unilateral cleft alveolus using cone beam computed tomographic scan - a randomized controlled trial

PURPOSE

The aim of present study was to compare and evaluate the maxillary alveolar ridge formation and ridge continuity using cancellous and corticocanellous bone graft harvested from anterior iliac crest for complete secondary unilateral cleft alveolus defects.

MATERIAL AND METHOD

All patients were randomized into two groups for secondary alveolar bone grafting. Group I (n = 10) patients treated with cancellous particulate bone graft and group II (n = 10) patients treated with cortico-cancellous block graft. Maxillary alveolar ridge bone formation was assessed with the help of cone beam computed tomography (CBCT) scan using Planmeca Romexis Viewer 5.0 software. Maxillary alveolar ridge continuity was assessed with axial section of CBCT scan and clinical occlusal photograph. Preoperative CBCT scan and occlusal photographs were compared with post-op 6-month CBCT scan and occlusal photographs.

RESULT

The mean preoperative volume of cleft defect in group I was 4.2576 cm3 whereas in group II it was 4.2268 cm3. The mean postoperative bone bridge formation after 6 months in group I was 4.055 cm3 whereas in group II it was 3.8103 cm3. Preoperative and 6-month postoperative axial sections of CBCT scans were compared and 100% maxillary alveolar ridge continuity was achieved in both groups. The preoperative and postoperative occlusal photographs of both the groups were compared and showed accurate bone and well aligned maxillary alveolar ridge formation in all patients.

CONCLUSION

The present study concluded that maxillary alveolar ridge formation rate is less in cortico-cancellous iliac crest block graft compared to cancellous iliac crest particulate graft, but is equally good as cancellous bone graft.

CLINICAL TRIAL REGISTRATION NO

(REF/2020/09/031605)/ CTRI/ 2020/09/028001.

Reconstruction of recurrent shoulder dislocation with glenoid bone defect with 3D-printed titanium alloy pad: outcomes at 2-year minimum follow-up

BACKGROUND

To evaluate the outcome of shoulder arthroscopy-assisted implantation of three-dimensional (3D)-printed titanium pads for recurrent shoulder dislocation with glenoid bone defects.

METHODS

From June 2019 to May 2020, the clinical efficacy of 3D printed titanium pad implantation assisted by shoulder arthroscopy, for the treatment of recurrent shoulder dislocations with shoulder glenoid defects was retrospectively analyzed. The American Shoulder and Elbow Surgeons (ASES) shoulder, Rowe, and Constant scores were recorded before surgery and at 3 months, 6 months, 1 year, and 2 years after surgery. 3D computed tomography (CT) and magnetic resonance imaging were used to evaluate the location of the glenoid pad, bone ingrowth, joint degeneration, and osteochondral damage.

RESULTS

The mean age of the 12 patients was 21.4 (19-24) years and the mean follow-up time was 27.6 (24-35) months. The Visual Analog Scale score significantly improved from 5.67 ± 1.98 preoperatively to 0.83 ± 0.58 postoperatively (p = 0.012). The postoperative ASES score was significantly increased to 87.91 ± 3.47 compared with preoperative ASES score (46.79 ± 6.45) (p < 0.01). Rowe and Constant scores also improved from 22.5 ± 12.34 and 56.58 ± 7.59 preoperatively to 90.83 ± 4.69 and 90.17 ± 1.89 at 2 years postoperatively, respectively. CT performed 2 years after surgery showed that the pad perfectly replenished the bone-defective part of the shoulder glenoid and restored the articular surface curvature of the shoulder glenoid in the anterior-posterior direction, and the bone around the central riser of the pad was tightly united. Magnetic resonance imaging 2 years after surgery showed that the humeral head osteochondral bone was intact, and there was no obvious osteochondral damage.

CONCLUSIONS

3D printed titanium pads are a reliable, safe, and effective surgical procedure for treating recurrent shoulder dislocations with glenoid bone defects.

Preliminary efficacy analysis of block iliac bone grafting in patients with alveolar cleft in mixed dentition

OBJECTIVES

To investigate the efficacy of block iliac bone grafting in patients with unilateral alveolar cleft in mixed dentition.

METHODS

A retrospective study was conducted on patients with unilateral alveolar clefts in mixed dentition who were treated in the Department of Oral and Maxillofacial Surgery, Fujian Medical University Union Hospital. All patients underwent unilateral alveolar cleft bone graft repair with autogenous block iliac bone blocks. The healing of bone blocks was analyzed at 1 week and 6-12 months after surgery. Mimics software was used for the three-dimensional reconstruction and volumetric measurement of the iliac bone blocks on the follow-up imaging data of 15 patients aged 9-12 years without the eruption of canines before surgery, and the bone resorption rate of the iliac bone blocks was comparatively analyzed.

RESULTS

In the 37 patients, bone grafting was successful in 32 and failed in five. The success rate of bone grafting was 86.5%. In 15 patients aged 9-12 years without the eruption of canines before surgery, eruption through the bone graft area was observed in two patients 6-12 months after the operation. Cone beam computer tomography showed that the grafted bone block exhibited good bony connections, and its resorption mainly occurred on the crests and palatal sides of the alveolar ridge. Bone resorption rates varied considerably between patients with a mean bone resorption rate of 39.0%±13.8% at 6-12 months after surgery.

CONCLUSIONS

For patients in mixed dentition, bone grafting with block iliac bone can achieve better osteogenesis effect.

Characterization of a composite polylactic acid-hydroxyapatite 3D-printing filament for bone-regeneration

Autologous cancellous-bone grafts are the current gold standard for therapeutic interventions in which bone-regeneration is desired. The main limitations of these implants are the need for a secondary surgical site, creating a wound on the patient, the limited availability of harvest-safe bone, and the lack of structural integrity of the grafts. Synthetic, resorbable, bone-regeneration materials could pose a viable treatment alternative, that could be implemented through 3D-printing. We present here the development of a polylactic acid-hydroxyapatite (PLA-HAp) composite that can be processed through a commercial-grade 3D-printer. We have shown that this material could be a viable option for the development of therapeutic implants for bone regeneration. Biocompatibility in vitro was demonstrated through cell viability studies using the osteoblastic MG63 cell-line, and we have also provided evidence that the presence of HAp in the polymer matrix enhances cell attachment and osteogenicity of the material. We have also provided guidelines for the optimal PLA-HAp ratio for this application, as well as further characterisation of the mechanical and thermal properties of the composite. This study encompasses the base for further research on the possibilities and safety of 3D-printable, polymer-based, resorbable composites for bone regeneration.