Optimization of a Green Ultrasound-Assisted Extraction of Different Polyphenols from Pistacia lentiscus L. Leaves Using a Response Surface Methodology

Design of Experiments for Optimizing Ultrasound-Assisted Extraction of Bioactive Compounds from Plant-Based Sources

Plant-based materials are an important source of bioactive compounds (BC) with interesting industrial applications. Therefore, adequate experimental strategies for maximizing their recovery yield are required. Among all procedures for extracting BC (maceration, Soxhlet, hydro-distillation, pulsed-electric field, enzyme, microwave, high hydrostatic pressure, and supercritical fluids), the ultrasound-assisted extraction (UAE) highlighted as an advanced, cost-efficient, eco-friendly, and sustainable alternative for recovering BC (polyphenols, flavonoids, anthocyanins, and carotenoids) from plant sources with higher yields. However, the UAE efficiency is influenced by several factors, including operational variables and extraction process (frequency, amplitude, ultrasonic power, pulse cycle, type of solvent, extraction time, solvent-to-solid ratio, pH, particle size, and temperature) that exert an impact on the molecular structures of targeted molecules, leading to variations in their biological properties. In this context, a diverse design of experiments (DOEs), including full or fractional factorial, Plackett-Burman, Box-Behnken, Central composite, Taguchi, Mixture, D-optimal, and Doehlert have been investigated alone and in combination to optimize the UAE of BC from plant-based materials, using the response surface methodology and mathematical models in a simple or multi-factorial/multi-response approach. The present review summarizes the advantages and limitations of the most common DOEs investigated to optimize the UAE of bioactive compounds from plant-based materials.

Phytochemical investigation of Pistacia lentiscus L. var. Chia leaves: A byproduct with antimicrobial potential

Pistacia lentiscus L. var. Chia belongs to the Anacardiaceae family, and it is cultivated only in the south part of Chios island, in Greece. Even though it is renowned for its unique resin, Chios mastic gum (CMG), the tree leaves have also been used in traditional medicine, while the annual pruning generates a large biomass of unused by-products. Thus, the aim of the present study was the detailed phytochemical investigation of P. lentiscus var. Chia leaves towards the search of antimicrobial agents. UPLC-HRMS & HRMS/MS based dereplication methods led to the detailed characterization of the aqueous leaf extract. In addition, twelve compounds were isolated and purified from the methanol extract and were identified using spectroscopic and spectrometric methods (NMR, HRMS) belonging to phenolic acids, tannins, flavonoids and terpenes, with the most interesting being 2-hydroxy-1,8-cineole β-D-glucopyranoside which was isolated for the first time in the Anacardiaceae family. Remarkably, based on NMR data, methanol and aqueous extracts were found to be particularly rich in shikimic acid, a valuable building block for the pharmaceutical industry, for instance in the synthesis of the active ingredient of Tamiflu®, oseltamivir. Finally, extracts (EtOAc, MeOH, H2O) and major compounds i.e., shikimic acid, 2-hydroxy-1,8-cineole β-D-glucopyranoside and myricitrin were evaluated for their antimicrobial properties. MeOH and H2O mastic leaf extracts as well as myricitrin and, particularly, 2-hydroxy-1,8-cineole β-D-glucopyranoside showed significant selective activity against pathogenic Mucorales, but not against Aspergilli (Aspergillus nidulans, Aspergillus fumigatus), Candida albicans or bacteria (Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis).

Advances in Natural Product Extraction Techniques, Electrospun Fiber Fabrication, and the Integration of Experimental Design: A Comprehensive Review

The present review explores the growing interest in the techniques employed for extracting natural products. It emphasizes the limitations of conventional extraction methods and introduces superior non-conventional alternatives, particularly ultrasound-assisted extraction. Characterization and quantification of bioactive constituents through chromatography coupled with spectroscopy are recommended, while the importance of method development and validation for biomarker quantification is underscored. At present, electrospun fibers provide a versatile platform for incorporating bioactive extracts and have extensive potential in diverse fields due to their unique structural and functional characteristics. Thus, the review also highlights the fabrication of electrospun fibers containing bioactive extracts. The preparation of biologically active extracts under optimal conditions, including the selection of safe solvents and cost-effective equipment, holds promising potential in the pharmaceutical, food, and cosmetic industries. Integration of experimental design into extraction procedures and formulation development is essential for the efficient production of health products. The review explores potential applications of encapsulating natural product extracts in electrospun fibers, such as wound healing, antibacterial activity, and antioxidant properties, while acknowledging the need for further exploration and optimization in this field. The findings discussed in this review are anticipated to serve as a valuable resource for the processing industry, enabling the utilization of affordable and environmentally friendly, natural, and raw materials.

Pineapple peel waste valorization for extraction of bio-active compounds and protein: Microwave assisted method and Box Behnken design optimization

Pineapple peel waste (PPW) is obtained in huge quantities out of pineapple canning industries and it is found to be rich in bioactive compounds with antioxidant activity and an opulent source of bromelain protein having commercial importance. To fulfil the purpose, microwave assisted extraction was considered. Three parameters varied were solvent to substrate ratio, microwave power and extraction time. The independent variables were solvent to substrate ratio (10:1 mL/g to 20:1 mL/g), microwave power (300 W-600 W) and extraction time (40 min-50 min). Optimization was done with three factors and three level Box- Behnken Design (BBD). Each of the experiment has been analysed for Total phenolic content (TPC), Total flavonoid content (TFC), Total tannin content (TTC) as well as for protein content. The Folin- Ciocalteu method was utilized for analysing TPC, TTC and the colorimetric method (AlCl₃) was used for the analysis of TFC, protein content was analysed by lowry's method and antioxidant activity making use of 2,2-diphenyl-1-picrylhydrazyl (DPPH). The p values were less than 0.05 which showed all the four models were significant. The experimental values and the predicted values were harmonious for the optimum conditions. The optimum condition obtained out of BBD were solvent to substrate ratio of 20:1 mL/g, microwave power of 600 W and extraction time 40 min. Antioxidant activity for the extract was found out by DPPH assay under the optimized conditions was 75% along with proteolytic activity of bromelain as 1647.612 GDUg_concentrate^-1.

Optimization of Total Saponin Extraction from Polyscias fruticosa Roots Using the Ultrasonic-Assisted Method and Response Surface Methodology

Polyscias fruticosa (L.) Harms is commonly used for medicinal purposes in Vietnam. In traditional medicine, the plant is used to cure ischemia, reduce inflammation, and increase cerebral blood circulation. Triterpene saponins are the major chemical constituents found in the roots of P. fruticosa. This compound exhibited a broad spectrum of biological effects, including lowering blood sugar, suppressing tumor growth and inflammation. This study focused on optimizing the process of total saponins extraction from P. fruticosa roots using the ultrasonic-assisted extraction (UAE) method, ethanol solvent and response surface methodology, and Box–Behnken design model, then evaluating the cytotoxic effect against some cancer cell lines. The results showed that under the optimal conditions, including an extraction temperature of 60 °C and ultrasonic power of 185 W in 65 min, the maximum extraction yield and total saponin content were 14.51 ± 1.15% and 41.24 ± 1.68 mg/g, respectively. Moreover, the saponin extract had cytotoxic effects against A549, HepG2, PC-3, and Hela. The results of this study confirmed that triterpene saponin is an important chemical component which is present in a high content in P. fruticosa roots and gives rise to significant biological activities. In addition, UAE can be used as a highly efficient method for triterpene saponins extraction from P. fruticosa roots.

Green extraction and characterization of leaves phenolic compounds: a comprehensive review

Although containing significant levels of phenolic compounds (PCs), leaves biomass coming from either forest, agriculture, or the processing industry are considered as waste, which upon disposal, brings in environmental issues. As the demand for PCs in functional food, pharmaceutical, nutraceutical and cosmetic sector is escalating day by day, recovering PCs from leaves biomass would solve both the waste disposal problem while ensuring a valuable "societal health" ingredient thus highly contributing to a sustainable food chain from both economic and environmental perspectives. In our search for environmentally benign, efficient, and cost-cutting techniques for the extraction of PCs, green extraction (GE) is presenting itself as the best option in modern industrial processing. This current review aims to highlight the recent progress, constraints, legislative framework, and future directions in GE and characterization of PCs from leaves, concentrating particularly on five plant species (tea, moringa, stevia, sea buckthorn, and pistacia) based on the screened journals that precisely showed improvements in extraction efficiency along with maintaining extract quality. This overview will serve researchers and relevant industries engaged in the development of suitable techniques for the extraction of PCs with increasing yield.

Polysaccharides and polyphenol in dried Morinda citrifolia fruit tea after different processing conditions: Optimization analysis using response surface methodology

The increasing popularity of Morinda citrifolia has many medical and health benefits because of its rich polysaccharides (PSC) and polyphenols (PPN). It has become popular to brew the dry M. citrifolia fruit slice as tea in some regions of China. In this study, optimize the extraction parameters of M. citrifolia fruit tea polysaccharides and polyphenols using response surface methodology. The results indicated the highest PSC yield of 17% at 46 °C for 11 min and the ratio of water/M. citrifolia fruit powder was 78 mL/g. The optimum extraction of PPN was at 95 °C for 10 min and the ratio of water/M. citrifolia fruit powder 90 mL/g, with 8.93% yield. Using dry M. citrifolia fruit slices as a tea is reported for the first time. Based on the results, the maximum level of PSC can be obtained under condition by infusing about four dried M. citrifolia fruit slice with average thickness and size in warm boiled water for 11 min, taking a 300 mL cup (300 mL of water) for example. The maximum level of PPN can be obtained by adding three slices of dried M. citrifolia fruit slice to boiled water for 10 min. Considering the powder used in our study, the further pulverization of cutting into powder is more conducive to material precipitation. This study provides a scientific basis for obtaining PSC and PPN from dry M. citrifolia fruit slice tea by brewing.