Structural and physical properties of Ni1-xVxalloys around and away from quantum critical point

We investigate the room temperature structure (global and local), temperature dependent magnetic and transport behaviour of Ni1-xVx(0⩽x⩽0.13) alloys. Our Energy Dispersive Analysis of x-rays results show that the prepared compositions are stoichiometric. With increase in V doping, the compounds exhibit a quantum phase transition aroundxc= 0.12, where the ferromagnetic phase is suppressed. Our results show that all the compounds stabilize in face centred cubic structure at RT and the lattice parameter shows unusual behaviour close toxc. The magnetic and heat capacity studies show signature of Griffiths phase on either side ofxc. From 25 K to the lowest collected temperature, we observe a linear T dependence of resistivity atx = 0.1 and aroundxc, which is separated by a Fermi-liquid region aroundx = 0.106. This suggests that the origin of the transport behaviour is different around the quantum critical point and away from it. Our Ni K-edge x-ray Absorption Spectroscopy results show that there is a significant reduction in the first coordination number around Ni central atom on doping. Further, with doping, there is distortion in the first coordination shell around Ni. This suggests, with V doping, the local structure around Ni is different from the global structure as obtained from the x-ray Diffraction results. Interestingly, with doping, we observe a direct connection between the extent of distortion at RT and the magnetic disorder obtained at 2 K. We believe our results will motivate the scientific community to further study the interplay between the structural disorder and quantum fluctuations with temperature at the local level.

The Biodegradation of 4-Chlorophenol in a Moving Bed Biofilm Reactor Using Response Surface Methodology: Effect of Biogenic Substrate and Kinetic Evaluation

4-Chlorophenol (4-CP) is a persistent organic pollutant commonly found in petrochemical effluents. It causes toxic, carcinogenic and mutagenic effects on human beings and aquatic lives. Therefore, an environmentally benign and cost-effective approach is needed against such pollutants. In this direction, the chlorophenol degrading bacterial consortium consisting of Bacillus flexus GS1 IIT (BHU) and Bacillus cereus GS2 IIT (BHU) was isolated from a refinery site. A composite biocarrier namely polypropylene-polyurethane foam (PP-PUF) was developed for bacterial cells immobilization purpose. A lab-scale moving bed biofilm reactor (MBBR) packed with Bacillus sp. immobilized PP-PUF biocarrier was employed to analyse the effect of peptone on biodegradation of 4-CP. The statistical tool, i.e. response surface methodology (RSM), was used to optimize the process variables (4-CP concentration, peptone concentration and hydraulic retention time). The higher values of peptone concentration and hydraulic retention time were found to be favourable for maximum removal of 4-CP. At the optimized process conditions, the maximum removals of 4-CP and chemical oxygen demand (COD) were obtained to be 91.07 and 75.29%, respectively. In addition, three kinetic models, i.e. second-order, Monod and modified Stover-Kincannon models, were employed to investigate the behaviour of MBBR during 4-CP biodegradation. The high regression coefficients obtained by the second-order and modified Stover-Kincannon models showed better accuracy for estimating substrate degradation kinetics. The phytotoxicity study supported that the Vigna radiata seeds germinated in treated wastewater showed higher growth (i.e. radicle and plumule) than the untreated wastewater.

Structural-Based Virtual Screening of FDA-Approved Drugs Repository for NSP16 Inhibitors, Essential for SARS-COV-2 Invasion Into Host Cells: Elucidation From MM/PBSA Calculation

NSP16 is one of the structural proteins of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) necessary for its entrance to the host cells. It exhibits 2'O-methyl-transferase (2'O-MTase) activity of NSP16 using methyl group from S-adenosyl methionine (SAM) by methylating the 5-end of virally encoded mRNAs and shields viral RNA, and also controls its replication as well as infection. In the present study, we used in silico approaches of drug repurposing to target and inhibit the SAM binding site in NSP16 using Food and Drug Administration (FDA)-approved small molecules set from Drug Bank database. Among the 2 456 FDA-approved molecules, framycetin, paromomycin, and amikacin were found to be significant binders against the SAM binding cryptic pocket of NSP16 with docking score of -13.708, -14.997 and -15.841 kcal/mol, respectively. Classical molecular dynamics (MD) simulation and molecular mechanics Poisson-Boltzmann surface area (MM/PBSA)-based binding free energy calculation depicted that all these three framycetin, paromomycin, and amikacin might be promising therapeutic leads towards SARS-CoV-2 infections via host immune escape inhibition pathway.

A comprehensive insight on the challenges for COVID-19 vaccine: A lesson learnt from other viral vaccines

The aim of this study is to comprehensively analyze previous viral vaccine programs and identify potential challenges and effective measures for the COVID-19 vaccine program. Previous viral vaccine programs, such as those for HIV, Zika, Influenza, Ebola, Dengue, SARS, and MERS, were evaluated. Paramount challenges were identified, including quasi-species, cross-reactivity, duration of immunity, revaccination, mutation, immunosenescence, and adverse events related to viral vaccines. Although a large population has been vaccinated, mutations in SARS-CoV-2 and adverse events related to vaccines pose significant challenges. Previous vaccine programs have taught us that predicting the final outcome of the current vaccine program for COVID-19 cannot be determined at a given state. Long-term follow-up studies are essential. Validated preclinical studies, long-term follow-up studies, alternative therapeutic approaches, and alternative vaccines are necessary.

Biofuels from inulin-rich feedstocks: A comprehensive review

Biofuels are considered as a pre-eminent alternate to fossil fuels to meet the demand of future energy supply in a sustainable manner. Conventionally, they are produced from lignocellulosic raw materials. Saccharification of lignocellulosic raw materials for bioethanol production is a cumbersome process as compared to inulin-rich feedstocks. Various inulin-rich feedstocks, viz. jerusalem artichoke, chicory, dahlia, asparagus sp., etc. has also been exploited for the production of biofuels, viz. bioethanol, acetone, butanol, etc. The ubiquitous availability of inulin-rich feedstocks and presence of large amount of inulin makes them a robust substrate for biofuels production. Different strategies, viz. separate hydrolysis and fermentation, simultaneous saccharification and fermentation and consolidated bioprocessing have been explored for the conversion of inulin-rich feedstocks into biofuels. These bioprocess strategies are simple and efficient. The present review elaborates the prospective of inulin-rich feedstocks for biofuels production. Bioprocess strategies exploited for the conversion of inulin-rich feedstocks have also been highlighted.

A systematic review on SARS-CoV-2 remission: an Emerging challenge for its management, treatment, immunization strategies and post-treatment guidelines

The COVID-19 disease caused by severe acute respiratory syndrome coronavirus -2 (SARS-CoV-2) has posed as a major health concern for people all across the globe. Along with the increasing confirmed patients being readmitted with complaints for fever, cough, cold, the effective monitoring of 'relapse' of the SARS-CoV-2 virus in the previously discharged patients have become the next area of focus. However, availability of limited data on reactivation of SARS-CoV-2 makes the disease prognosis as well as the effective control of re-infection an immense challenge. Prompted by these challenges, we assessed the possibility of re-infection in discharged patients and the risk of the transmission, proficiency of RT-PCR results and approximate period required for the quarantine and the real challenges for the development of vaccine. In the present review, the published literature on all the possible cases of re-infection from February to July were reported, thereby selected 142 studies from a hub of overall 669 studies after full text screening. The incomplete virus clearance, poor sensitivity of the present diagnostic testing, emergence of mutant strains, insufficient mucus collection from the throat swab etc. are some of the possible causes of re-infection. The new protocols for management of COVID-19 discharged patients should be revised in the guidelines.

Valproic acid and Propionic acid modulated mechanical pathways associated with Autism Spectrum Disorder at prenatal and neonatal exposure

Autism Spectrum Disorder (ASD) is a composite disorder of brain development with uncertain etiology and pathophysiology. Genetic factors are important in ASD causation, although environmental factors are also involved in ASD pathophysiology. Environmental factors might affect the genetic processes of brain development through the modulation of molecular pathways that might be involved with ASD. Valproic acid and Propionic acid are the major environmental factors that serve as medicine and food preservative. VPA is used as an anti-epileptic medicine, but it has adverse effects on pregnant women and alters the developmental patterns of the embryo. It is a multi-targeting agent and affects through the 5-HT, GABA, etc. PPA is a secondary metabolite of gut microbiota that is commonly used as a food preservative. PPA plays a significant role in ASD causation by altering the several developmental molecular pathways like PTEN/Akt, mTOR/Gskβ, Cytokines activated pathways, etc., at the prenatal and neonatal stage. Moreover, ASD complexity might be increased by some other important factors like vitamin A deficiency and Vitamin A is important for cortical brain development and neuronal cell differentiation. Additionally, several important genes such as RELN, Lhx2, CREB, IL-6, NMDA, BDNF, etc. also altered in ASD that involved in brain development, Central Nervous System, Enteric Nervous System. These genes affect the neuronal differentiation, hyperactivity, oxidative stress, oxytocin, and GABA imbalance that lead the improper behavior in autistic individuals. These genes are also studied in VPA and PPA ASD-like animal models. In this review, we explored the mechanical pathways that might be altered with VPA and PPA exposures at the embryonic developmental stage or neonatal developmental stage.

Promising traditional Indian medicinal plants for the management of novel Coronavirus disease: A systematic review

Traditional Indian medical practices (Ayurveda, Siddha, Unani, and homeopathy) are a vast reservoir of knowledge about medicinal plants. The promising pharmacological properties of these plants have paved the way for developing therapy against novel Coronavirus (CoV) infection. The current review will summarize published works of literature on the effects of traditional Indian medicinal plants against acute respiratory infection (COVID‐19, SARS, Influenza, and Respiratory syncytial virus infection) and registered clinical trials of traditional Indian herbal medicines in COVID‐19. The current study aims to comprehensively evaluate the data of traditional Indian medicinal plants to warrant their use in COVID‐19 management. PubMed, Embase, and Cochrane databases were searched along with different clinical trial databases. A total of 22 relevant traditional Indian medicinal plants (35 relevant studies) were included in the current study having potential antiviral properties against virus‐induced respiratory illness along with promising immunomodulatory and thrombolytic properties. Further, 36 randomized and nonrandomized registered clinical trials were also included that were aimed at evaluating the efficacy of herbal plants or their formulations in COVID‐19 management. The antiviral, immunomodulatory, and thrombolytic activities of the traditional Indian medicinal plants laid down a strong rationale for their use in developing therapies against SARS‐CoV‐2 infection. The study identified some important potential traditional Indian medicinal herbs such as Ocimum tenuiflorum, Tinospora cordifolia, Achyranthes bidentata, Cinnamomum cassia, Cydonia oblonga, Embelin ribes, Justicia adhatoda, Momordica charantia, Withania somnifera, Zingiber officinale, Camphor, and Kabusura kudineer, which could be used in therapeutic strategies against SARS‐CoV‐2 infection.

Why airborne transmission hasn't been conclusive in case of COVID-19? An atmospheric science perspective

Airborne transmission is one of the routes for the spread of COVID-19 which is caused by inhalation of smaller droplets1 containing SARS-CoV-2 (i.e., either virus-laden particulate matter: PM and/or droplet nuclei) in an indoor environment. Notably, a significant fraction of the small droplets, along with respiratory droplets, is produced by both symptomatic and asymptomatic individuals during expiratory events such as breathing, sneezing, coughing and speaking. When these small droplets are exposed to the ambient environment, they may interact with PM and may remain suspended in the atmosphere even for several hours. Therefore, it is important to know the fate of these droplets and processes (e.g., physical and chemical) in the atmosphere to better understand airborne transmission. Therefore, we reviewed existing literature focussed on the transmission of SARS-CoV-2 in the spread of COVID-19 and present an environmental perspective on why airborne transmission hasn't been very conclusive so far. In addition, we discuss various environmental factors (e.g., temperature, humidity, etc.) and sampling difficulties, which affect the conclusions of the studies focussed on airborne transmission. One of the reasons for reduced emphasis on airborne transmission could be that the smaller droplets have less number of viruses as compared to larger droplets. Further, smaller droplets can evaporate faster, exposing SARS-CoV-2 within the small droplets to the environment, whose viability may further reduce. For example, these small droplets containing SARS-CoV-2 might also physically combine with or attach to pre-existing PM so that their behaviour and fate may be governed by PM composition. Thus, the measurement of their infectivity and viability is highly uncertain due to a lack of robust sampling system to separately collect virions in the atmosphere. We believe that the present review will help to minimize the gap in our understanding of the current pandemic and develop a robust epidemiological method for mortality assessment.

Fugitive dust emission control study for a developed smart dry fog system

Air pollution due to dust emission is continuously increasing day by day in mining and allied industrial areas. Mining operations contribute a substantial amount of dust emission at the crushing, screening, and bulk material handling in loading areas. The ambient suspended dust particles create a severe nuisance to workers and local dwellers. For effective controlling of positive dust emission, an innovative automated dry fog dust suppression system (DFDSS) has been developed using hybrid nozzles, sensors, actuators, controllers, screw compressors, air receivers, pumps, motors, and water arrangement with filtration facility. The DFDSS was installed in a crushing and screening plant of an iron ore mine in India. Performance study indicted fugitive dust emission concentration values ranged from 354 to 7040 μg m^-3, which was reduced to 91-300 μg m^-3 after installation of DFDSS. The reduced values were within the permissible limit of 1200 μg m^-3 at a distance of 25 ± 2 m in the predominant downwind direction. The installed DFDSS added a meager addition of moisture content of 0.032% in the handling iron ore material, which was below the acceptable limit of 0.1%. The DFDSS precisely regulated fugitive dust emission from various mining activities without affecting the minerals processing performance. Thus, the DFDSS can be implemented effectively in different mining and allied industries where there is a dust emission problem.

Electron-phonon coupling in APd3O4: A = Ca, Sr, and Sr0.85Li0.15

Here we have investigated the role of electron phonon coupling on the Raman spectrum of narrow bandgap semiconductors APd₃O₄ (A = Ca, Sr) and hole-doped system Sr_0.85Li_0.15Pd₃O₄. Four Raman active phonons are observed at room temperature for all three compounds as predicted by factor group analysis. The lowest energy phonon (∼190/202 cm^-1) associated with Pd vibrations is observed to exhibit an asymmetric Fano-like lineshape in all the three compounds, indicating the presence of an interaction between the phonon and the electronic continuum. The origin of the electronic continuum states and electron-phonon coupling are discussed based on our laser power- and temperature-dependent Raman results. We have observed an enhanced strength of electron-phonon coupling in Sr_0.85Li_0.15Pd₃O₄ at low temperatures which can be attributed to the metallicity in this doped compound.

HPTLC-densitometry quantification of fructooligosaccharides from inulin hydrolysate

The objective of present research was to develop an easy, precise and accurate HPTLC densitometry method for quantification of fructooligosaccharides (FOSs) from inulin hydrolysate. The chromatographic separation of FOSs was performed on pre-coated silica gel (60, F₂₅₄) TLC plates using a mobile phase (butanol:ethanol:water, 60:24:16), and densitometry evaluation of FOSs was performed at A₅₀₀. Both kestose and nystose were successfully resolved with R_f value of 0.43 and 0.34, respectively. The accuracy, reliability and reproducibility of developed method was assessed by percent relative standard deviation of kestose and nystose for instrument precision (1.43% and 1.50%), repeatability (1.48% and 1.56%), intra-day precision (1.60% and 1.63%), inter-day precision (1.62% and 1.66%), limit of detection (4.58 ng/spot and 4.58 ng/spot), limit of quantification (13.87 ng/spot and 13.89 ng/spot) and recovery (98.81% and 98.69%). Moreover, overlapping spectra of test sample with standard confirms the specificity of developed method, which was validated as per ICH guidelines.

Insights into size-segregated particulate chemistry and sources in urban environment over central Indo-Gangetic Plain

Size-segregated airborne fine (PM_2.1) and coarse (PM_>2.1) particulates were measured in an urban environment over central Indo-Gangetic plain in between 2015 and 2018 to get insights into its nature, chemistry and sources. Mean (±1σ) concentration of PM_2.1 was 98 (±76) μgm^-3 with a seasonal high during winter (DJF, 162 ± 71 μgm^-3) compared to pre-monsoon specific high in PM_>2.1 (MAMJ, 177 ± 84 μgm^-3) with an annual mean of 170 (±69) μgm^-3. PM_2.1 was secondary in nature with abundant secondary inorganic aerosols (20% of particulate mass) and water-soluble organic carbon (19%) against metal enriched (25%) PM_>2.1, having robust signature of resuspensions from Earth's crust and road dust. Ammonium-based neutralization of particulate acidity was essentially in PM_2.1 with an indication of predominant H₂SO₄ neutralization in bisulfate form compared to Ca²⁺ and Mg²⁺-based neutralization in PM_>2.1. Molecular distribution of n-alkanes homologues (C₁₇-C₃₅) showed C_max at C₂₃ (PM_2.1) and C₁₈ (PM_>2.1) with weak dominance of odd-numbered n-alkanes. Carbon preference index of n-alkanes was close to unity (PM_2.1: 1.4 ± 0.3; PM_>2.1: 1.3 ± 0.4). Fatty acids (C₁₂-C₂₆) were characterized with predominance of even carbon with C_max at n-hexadecanoic acid (C_16:0). Low to high molecular weight fatty acid ratio ranged from 2.0 (PM_>2.1) to 5.6 (PM_2.1) with vital signature of anthropogenic emissions. Levoglucosan was abundant in PM_2.1 (758 ± 481 ngm^-3) with a high ratio (11.6) against galactosan, emphasizing robust contribution from burning of hardwood and agricultural residues. Receptor model resolves secondary aerosols and biomass burning emissions (45%) as the most influential sources of PM_2.1 whereas, crustal (29%) and secondary aerosols (29%) were found responsible for PM_>2.1; with significant variations among the seasons.

Source apportionment and health risk assessment of airborne particulates over central Indo-Gangetic Plain

Sources of airborne particulates (PM₁₀) were investigated in two contrasting sites over central Indo-Gangetic Plain (IGP), one representing a rural background (Mirzapur) and another as an urban pollution hotspot (Varanasi). Very high PM₁₀ concentration was noted both in Varanasi (178 ± 105 μgm^-3; N:435) and Mirzapur (131 ± 56 μgm^-3; N:169) with 72% and 62% of monitoring days exceeded the national air quality standard, respectively. Particulate-bound elements contribute significant proportion of PM₁₀ mass (15%-18%), with highest contribution from Ca (7%-10%) and Fe (2%-3%). Besides, presence of Zn (1%-3%), K (1%-2%) and Na (1%-2%) was also noted. Water-soluble ionic species contributed 15%-19% of particulate mass, primarily by the secondary inorganic aerosols (SIA). Among the SIA, sulphate (5%-7%) and nitrate (4%) were prominent, contributing 59%-62% of the total ionic load, especially in winter. Particulate-bound metallic species and ions were selectively used as signatory molecules and source apportionment of PM₁₀ was done by multivariate factor analysis. UNMIX was able to extract particulate sources in both the locations and crustal resuspensions (dust/-soil) were identified as the dominant source contributing 57%-63% of PM₁₀ mass. Secondary aerosols were the second important source (17%-23%), followed by emissions from biomass/-refuse burning (10-19%). Transport of airborne particulates from upper IGP by prevailing westerly were identified as the important contributor of particulates, especially during high particulate loading days. Health risks associated to particulate-bound toxic metal exposure were also assessed. Non-carcinogenic health risk was within the permissible limit while there is possibility of elevated risk for PM₁₀-bound Cr and Cd, if adequate control measures are not in place.

Emission characteristics of ultrafine particles from bare and Al2O3 coated graphite for high temperature applications

Owing to its exceptional properties at high temperature, graphite is used in several applications such as structural material and fuel block in high temperature nuclear reactors. Air ingress is one of the serious safety concerns in these reactors. Oxidation of graphite leading to increased porosity affects its mechanical strength and may lead to core collapse resulting in a severe accident. During such a scenario, generation of graphite particles could be the main hazard. Once generated, these particles often in fine and ultrafine sizes, may carry radioactivity to large distances and/or for long times. These particles owing to their higher surface to volume ratio possess an additional inhalation hazard. Ultrafine particles have the potential to enter into respiratory tract and cause damage to body organs. Coating of graphite components is preferred to reduce the oxidation induced damages at high temperatures. In the present work, effect of alumina (Al2O3) coating on the emission characteristics of particles from graphite under high temperature conditions has been investigated. Bare and Al2O3 coated graphite specimens were heated within a closed chamber at varying temperatures during these experiments. Temporal evolution of concentrations of gases (CO and CO2) and particles were measured. The results reveal that Al2O3 coating on the graphite delayed the oxidation behavior and the structure of graphite remained largely intact at high temperatures. A significant reduction in aerosol formation and CO emission was also noticed for the coated specimens.

BCG as a game-changer to prevent the infection and severity of COVID-19 pandemic?

The impact of COVID-19 is changing with country wise and depend on universal immunization policies. COVID-19 badly affects countries that did not have universal immunization policies or having them only for the selective population of countries (highly prominent population) like Italy, USA, UK, Netherland, etc. Universal immunization of BCG can provide great protection against the COVID-19 infection because the BCG vaccine gives broad protection against respiratory infections. BCG vaccine induces expressions of the gene that are involved in the antiviral innate immune response against viral infections with long-term maintenance of BCG vaccine-induced cellular immunity. COVID-19 cases are reported very much less in the countries with universal BCG vaccination policies such as India, Afghanistan, Nepal, Bhutan, Bangladesh, Israel, Japan, etc. as compared to without BCG implemented countries such as the USA, Italy, Spain, Canada, UK, etc. BCG vaccine provides protection for 50–60 years of immunization, so the elderly population needs to be revaccinated with BCG. Several countries started clinical trials of the BCG vaccine for health care workers and elderly people. BCG can be uses as a prophylactic treatment until the availability of the COVID-19 vaccine.

A Comprehensive Review of Animal Models for Coronaviruses: SARS-CoV-2, SARS-CoV, and MERS-CoV

The recent outbreak of coronavirus disease (COVID-19) caused by the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has already affected a large population of the world. SARS-CoV-2 belongs to the same family of severe acute respiratory syndrome coronavirus (SARS-CoV) and Middle East respiratory syndrome coronavirus (MERS-CoV). COVID-19 has a complex pathology involving severe acute respiratory infection, hyper-immune response, and coagulopathy. At present, there is no therapeutic drug or vaccine approved for the disease. There is an urgent need for an ideal animal model that can reflect clinical symptoms and underlying etiopathogenesis similar to COVID-19 patients which can be further used for evaluation of underlying mechanisms, potential vaccines, and therapeutic strategies. The current review provides a paramount insight into the available animal models of SARS-CoV-2, SARS-CoV, and MERS-CoV for the management of the diseases.

Collective removal of phenol and ammonia in a moving bed biofilm reactor using modified bio-carriers: Process optimization and kinetic study

The performance of a moving bed biofilm reactor (MBBR) with bio-carriers made of polypropylene-polyurethane foam (PP-PUF) was evaluated for the collective removal of phenol and ammonia. Three independent variables, including pH (5.0-8.0), retention time (2.0-12.0 h), and airflow rate (0.8-3.5 L/min) were optimized using central composite design (CCD) of response surface methodology (RSM). The maximum removal of phenol and ammonia was obtained to be 92.6, and 91.8%, respectively, in addition to the removal of 72.3% in the chemical oxygen demand (COD) level at optimum conditions. First-order and second-order kinetic models were analyzed to evaluate the pollutants removal kinetics in a MBBR. Finally, a second-order model was found to be appropriate for predicting reaction kinetics. The values of second-order rate constants were obtained to be 2.35, 0.25, and 1.85 L2/gVSS gCOD h for phenol, COD, and ammonia removal, respectively.

Novel therapeutic targets for amyotrophic lateral sclerosis

Amyotrophic lateral sclerosis (ALS) is an untreatable and fatal neurodegenerative disease that is identified by the loss of motor neurons in the spinal cord, brain stem, and motor cortex which theatrically reduces life expectancy. Although the primary cause of ALS remains unclear, its heterogeneity put forward for consideration of association with various factors, including endogenous and/or environmental ones, which may be involved in progressive motor neuron stress that causes activation of different cell death pathways. It is hypothesized that this disease is triggered by factors related to genetic, environmental, and age-dependent risk. In spite of large neurobiological, molecular and genetic research, at the beginning of the 21^st century, ALS still remains one of the most devastating neurodegenerative diseases because of the lack of effective therapeutic targets. It is a challenge for the clinical and scientific community. A better understanding of the etiology of ALS is necessary to develop specific targets of this progressive neurodegenerative disease. This review states about the current knowledge of targets in ALS research. This review provides an overview of the contribution of different targets like mitochondrial dysfunction, glutamate transport and excitotoxicity, protein accumulation, Oxidative stress, neuromuscular junction, microglia, and other molecular targets in the pathogenesis of ALS.

Novel targets for drug discovery in celiac disease

Celiac disease is a lifelong, immunological disorder induced by dietary protein-gluten, in a genetically susceptible populations, resulting in different clinical manifestations, the release of antibodies, and damage to the intestinal mucosa. The only recommended therapy for the disease is to strictly follow a gluten-free diet (GFD), which is difficult to comply with. A GFD is found to be ineffective in some active Celiac disease cases. Therefore, there is an unmet need for an alternative nondietary therapeutic approach. The review focuses on the novel drug targets for Celiac disease.

Understanding response surface optimization of medium composition for pullulan production from de-oiled rice bran by Aureobasidium pullulans

Central composite rotatable design of RSM was used for the optimization of medium composition for pullulan production from de-oiled rice bran by Aureobasidium pullulans in shake-flask fermentations. The sugars from de-oiled rice bran were extracted in distilled water under moist steam pressure and the obtained de-oiled rice bran extract (DRBE) was used for the optimization of medium composition. RSM optimized medium components (DRBE sugars, 3.88%; yeast extract, 0.24%; (NH₄)₂SO₄, 0.06%; K₂HPO₄, 0.57% (w/v), and pH, 5.22) supported 5.48% (w/v) pullulan production and 0.88 (A₆₀₀/100) biomass yield. Coefficient of determination for pullulan production (0.99) and biomass yield (0.99) was close to 1.0 which justifies significance of model. Lack of fit for both responses was non-significant, which shows fitness of quadratic model. FTIR and NMR spectral attributes confirmed the structure of pullulan. XRD patterns verified the amorphous nature of pullulan. De-oiled rice bran was found as a potential substrate for pullulan production.

Biotechnological applications of inulin-rich feedstocks

Inulin is a naturally occurring second largest storage polysaccharide with a wide range of applications in pharmaceutical and food industries. It is a robust polysaccharide which consists of a linear chain of β-2, 1-linked-d-fructofuranose molecules terminated with α-d-glucose moiety at the reducing end. It is present in tubers, bulbs and tuberous roots of more than 36,000 plants belonging to both monocotyledonous and dicotyledonous families. Jerusalem artichoke, chicory, dahlia, asparagus, etc. are important inulin-rich plants. Inulin is a potent substrate and inducer for the production of inulinases. Inulin/inulin-rich feedstocks can be used for the production of fructooligosaccharides and high-fructose syrup. Additionally, inulin-rich feedstocks can also be exploited for the production of other industrially important products like acetone, butanol, bioethanol, single cell proteins, single cell oils, 2, 3-butanediol, sorbitol, mannitol, etc. Current review highlights the biotechnological potential of inulin-rich feedstocks for the production of various industrially important products.

Novel investigation of the performance of continuous packed bed bioreactor (CPBBR) by isolated Bacillus sp. M4 and proteomic study

The present study reveals the benzene degrading potential of bacterial species isolated from petroleum contaminated soil. Genomic analysis suggests that Bacillus sp. M4 was found to be dominating species. The process parameters were optimized and found to be pH 7.0 ± 0.2, temperature 32 ± 5 °C, immobilization time (20 days) and benzene concentration 400 mg/L. The maximum removal efficiency of benzene was calculated and found to be 93.13% at elimination capacity156 (mg/L/day) and inlet loading rate 192 (mg/L/day) achieved in 54th days of operation. In the study, the residual metabolites were analyzed by GC/MS analysis and identified as benzene-1,2-diol. In order to identify the responsible protein involved in the process of benzene biodegradation The proteomic study was performed and proteins were identified by MALDI-TOF analysis. The molecular docking was confirmed by the benzene biodegradation.

Biocatalytic strategies for the production of high fructose syrup from inulin

The consumption of natural and low calorie sugars has increased enormously from the past few decades. To fulfil the demands, the production of healthy sweeteners as an alternative to sucrose has recently received considerable interest. Fructose is the most health beneficial and safest sugar amongst them. It is generally recognised as safe (GRAS) and has become an important food ingredient due its sweetening and various health promising functional properties. Commercially, high fructose syrup is prepared from starch by multienzymatic process. Single-step enzymatic hydrolysis of inulin using inulinase has emerged as an alternate to the conventional approach to reduce complexity, time and cost. The present review, outlines the enzymatic strategies used for the preparation of high fructose syrup from inulin/inulin-rich plant materials in batch and continuous systems, and its conclusions.

Biodegradation of wastewater in alternating aerobic-anoxic lab scale pilot plant by Alcaligenes sp. S3 isolated from agricultural field

The isolated microbial Alcaligenes sp. S₃ from the agricultural field was used for the biodegradation of synthetic wastewater containing atrazine. This study was conducted in an alternating aerobic-anoxic lab scale pilot plant. The performance of continuously operated pilot plant was evaluated in three different phases with varying atrazine concentration. The best performance of plant was observed in phase-II. The atrazine (200 mg/L) having COD value 1356 mg/L was used with varying flow rate and 90.56% COD removal was obtained at a flow rate of 300 mL/h on 122th day of operation. The effect of process parameter like pH and DO on the performance of the reactor was studied. The GC-MS analysis was investigated, and urea was found the intermediate/metabolites of atrazine biodegradation. The kinetic parameters such as half saturation rate constant (Ks) 106.80 mg/L; maximum specific growth rate (μ_max) 0.208 per day and inhibition constant (Ki) 374.91 mg/L were evaluated by Andrew-Haldane model.

Bioremediation of Congo red dye in immobilized batch and continuous packed bed bioreactor by Brevibacillus parabrevis using coconut shell bio-char

In the present study, bacterial species capable of degrading colour waste were isolated from the water bodies located near the carpet cluster in the Bhadohi district of U.P., India. Among the isolated species best one was selected on the basis of its capability to degrade Congo red in batch experiments using NaCl-Yeast as the nutrient media and further it was identified as Brevibacillus parabrevis using 16S rDNA sequencing. The process parameters were optimized for maximum degradation in batch experiments and found out to be: Inoculum size: 3 ml, Temperature: 30 °C, Time: 6 days leading to a removal of 95.71% of dye sample. The experiment showed that bacteria immobilized with coconut shell biochar in continuous mode showed much better degradation than batch study without immobilization. The kinetics parameters μ_max, Ks, and μ_maxK_s were found to be 0.461 per day, 39.44 mg/day, and 0.0117 L/mg/day using Monod model.

Hydrodynamic Signatures of Stationary Marangoni-Driven Surfactant Transport

We experimentally study steady Marangoni-driven surfactant transport on the interface of a deep water layer. Using hydrodynamic measurements, and without using any knowledge of the surfactant physicochemical properties, we show that sodium dodecyl sulphate and Tergitol 15-S-9 introduced in low concentrations result in a flow driven by adsorbed surfactant. At higher surfactant concentration, the flow is dominated by the dissolved surfactant. Using camphoric acid, whose properties are a priori unknown, we demonstrate this method's efficacy by showing its spreading is adsorption dominated.

Observation of pseudogap in MgB2

We investigate the electronic structure of a specially prepared highly dense conventional high temperature superconductor, MgB₂, employing high resolution photoemission spectroscopy. The spectral evolution close to the Fermi energy is commensurate to BCS descriptions as expected. However, the spectra in the wider energy range reveal the emergence of a pseudogap much above the superconducting transition temperature indicating an apparent departure from the BCS scenario. The energy scale of the pseudogap is comparable to the energy of the [Formula: see text] phonon mode responsible for superconductivity in MgB₂ and the pseudogap can be attributed to the effect of electron-phonon coupling on the electronic structure. These results reveal a scenario of the emergence of the superconducting gap within an electron-phonon coupling induced pseudogap and have significant implications in the study of high temperature superconductors.

Assessment of pesticides removal using two-stage Integrated Aerobic Treatment Plant (IATP) by Bacillus sp. isolated from agricultural field

The biodegradation of synthetic wastewater containing Atrazine, Malathion and Parathion was studied in two stage Integrated Aerobic Treatment Plant using Bacillus sp. (consortia) isolated from agricultural field. The influent stream containing these pesticides with initial COD of 1232mg/L were fed to first reactor and treated effluent of first reactor was fed to second reactor. The maximum removal of pesticides in IATP was found to be greater than 90%. The various process parameters such as pH, DO, Redox potential and BOD₅/COD were monitored during the treatment. The degradation of pesticides and its metabolites in the treated effluent were confirmed by GC-MS. Kinetic parameters such as first order rate constant (K_obs), cell yield (Y_X/C) and decay coefficients (K_dp) were evaluated and found to be 0.00425 per hr, 0.696mg of COD/mg MLSS and 0.0010 per hr respectively. This integrated process was found more effective than physico-chemical treatment of pesticides.

Biofiltration of xylene using wood charcoal as the biofilter media under transient and high loading conditions

The main objective of this study was to evaluate the performance of wood charcoal as biofilter media under transient and high loading condition. Biofiltration of xylene was investigated for 150days in a laboratory scale unit packed with wood charcoal and inoculated with mixed microbial culture at the xylene loading rates ranged from 12 to 553gm^-3h^-1. The kinetic analysis of the xylene revealed absence of substrate inhibition and possibility of achieving higher elimination under optimum condition. The pH, temperature, pressure drop and CO₂ production rate were regularly monitored during the experiments. Throughout experimental period, the removal efficiency (RE) was found to be in the range of 65-98.7% and the maximum elimination capacity (EC) was 405.7gm^-3h^-1. Molecular characterization results show Bacillus sp. as dominating microbial group in the biofilm.

Biodegradation and kinetic study of benzene in bioreactor packed with PUF and alginate beads and immobilized with Bacillus sp. M3

Benzene removal in free and immobilized cells on polyurethane foam (PUF) and polyvinyl alcohol (PVA)-alginate beads was studied using an indigenous soil bacterium Bacillus sp. M3 isolated from petroleum-contaminated soil. The important process parameters (pH, temperature and inoculums size) were optimized and found to be 7, 37°C and 6.0×10⁸CFU/mL, respectively. Benzene removals were observed to be 70, 84 and 90% within 9days in a free cell, immobilized PVA-alginate beads and PUF, respectively under optimum operating conditions. FT-IR and GC-MS analysis confirm the presence of phenol, 1,2-benzenediol, hydroquinone and benzoate as metabolites. The important kinetic parameter ratios (µ_max/K_s; L/mg·day₎ calculated using Monod model was found to be 0.00123 for free cell, 0.00159 for immobilized alginate beads and 0.002016 for immobilized PUF. Similarly inhibition constants (K_i; mg/L) calculated using Andrew-Haldane model was found to be 435.84 for free cell, 664.25 for immobilized alginate beads and 724.93 for immobilized PUF.

Removal of hydrogen sulfide generated during anaerobic treatment of sulfate-laden wastewater using biochar: Evaluation of efficiency and mechanisms

Removal of hydrogen sulfide (H₂S) from biogas was investigated in a biochar column integrated with a bench-scale continuous-stirred tank reactor (CSTR) treating sulfate-laden wastewater. Synthetic wastewater containing sulfate concentrations of 200-2000mg SO₄^2-/L was used as substrate, and the CSTR was operated at an organic loading rate of 1.5g chemical oxygen demand (COD)/L·day and a hydraulic retention time (HRT) of 20days. The biochar was able to remove about 98.0 (±1.2)% of H₂S for the ranges of concentrations from 105-1020ppmv, especially at high moisture content (80-85%). Very high H₂S adsorption capacity (up to 273.2±1.9mg H₂S/g) of biochar is expected to enhance the H₂S oxidation into S⁰ and sulfate. These findings bring a potentially novel application of sulfur-rich biochar as a source of sulfur, an essential but often deficient micro-nutrient in soils.

Airing 'clean air' in Clean India Mission

The submission explores the possibility of a policy revision for considering clean air quality in recently launched nationwide campaign, Clean India Mission (CIM). Despite of several efforts for improving availability of clean household energy and sanitation facilities, situation remain still depressing as almost half of global population lacks access to clean energy and proper sanitation. Globally, at least 2.5 billion people do not have access to basic sanitation facilities. There are also evidences of 7 million premature deaths by air pollution in year 2012. The situation is even more disastrous for India especially in rural areas. Although, India has reasonably progressed in developing sanitary facilities and disseminating clean fuel to its urban households, the situation in rural areas is still miserable and needs to be reviewed. Several policy interventions and campaigns were made to improve the scenario but outcomes were remarkably poor. Indian census revealed a mere 31% sanitation coverage (in 2011) compared to 22% in 2001 while 60% of population (700 million) still use solid biofuels and traditional cook stoves for household cooking. Further, last decade (2001-2011) witnessed the progress decelerating down with rural households without sanitation facilities increased by 8.3 million while minimum progress has been made in conversion of conventional to modern fuels. To revamp the sanitation coverage, an overambitious nationwide campaign CIM was initiated in 2014 and present submission explores the possibility of including 'clean air' considerations within it. The article draws evidence from literatures on scenarios of rural sanitation, energy practises, pollution induced mortality and climatic impacts of air pollution. This subsequently hypothesised with possible modification in available technologies, dissemination modes, financing and implementation for integration of CIM with 'clean air' so that access to both sanitation and clean household energy may be effectively addressed.

Performance evaluation of Malathion biodegradation in batch and continuous packed bed bioreactor (PBBR)

The aim of this work was to study the biodegradation of Malathion in batch and continuous packed bed (Polyurethane foam; PUF) bioreactor (PBBR). After 10days, 89% Malathion removal was observed in batch PBBR. Continuous PBBR was operated at various flow rates (5-30mL/h) under optimum condition over a period of 75days. Inlet loading rates and elimination capacities were observed in the range of 36-216 and 7.20-145.4mg/L/day with an average removal efficiency of more than 90% under steady state conditions. GC/MS analysis confirms phosphorodithionicacid,O,O,S-trimethylester and diethylmercaptosuccinate as metabolites. Biodegradation of Malathion under inhibitory and non-inhibitory conditions was studied using Monod and Andrew-Haldane models and the kinetic constants were calculated and found to be μ_max: 0.271 per day; K_s: 126.3mg/L using Monod and μ_max: 0.315 per day; K_s: 151.32mg/L; K_i: 594.75mg/L using Andrew-Haldane models.

Kinetic studies on degradation of Reactive Red 120 dye in immobilized packed bed reactor by Bacillus cohnii RAPT1

The degradation of Reactive Red 120 using Bacillus cohnii RAPT1 immobilized on polyurethane was studied. Initial experiments indicated that the percentage removal of dye in immobilized batch was significantly higher than batch (without immobilization). The optimum process parameters such as effect of dye concentration, time of immobilization on Poly Urethane Foam, initial inoculum size, pH and temperature for removal of dye were investigated and was found as 200ppm, 36h, 300*10(6) colony forming units/ml, 8.0 and 35°C respectively. Under optimum conditions, 100% removal of dye was obtained within 4h. The kinetics of biodegradation for the batch with free cells and immobilised packed batch was found to be IInd order with kinetic constant and initial rate of reaction as 0.0408, 0.084L/(mgday) and 1632, 3360 (mg/Lday) respectively.

Characterization and antimicrobial activity of lectins from Penicillium sp

Ten Penicillium sp. were screened for lectin activity for occurrence of lectins. Mycelial extracts from submerged cultures of P. corylophilum, P. expansum and P. purpurogenum showed agglutination against human (A, B, AB and O), goat, sheep, pig and rabbit erythrocytes. Neuraminidase treatment to human blood- type O erythrocytes substantially increased their agglutinability by all the lectins as compared to untreated erythrocytes. Modification of erythrocyte surfaces by protease increased the lectin titre only of P. corylophilum with no effect on other two lectins. P. corylophilum and P. expansum displayed relatively lower titres in mycelial extracts prepared from agar plate cultures as compared to broth cultures. A panel of sugars was tested for inhibition of lectin activity. All the lectins were found to be specific for asialofetuin, bovine submaxillary mucin, porcine stomach mucin, chondroitin-6-sulphate, D-sucrose and D-glucose. P. corylophilum lectin was expressed (Titre 8) by 5 day old cultures, reaching its maximum level (Titre 32) upon 8 days of cultivation, thereafter declin in lectin activity was observed. P. purpurogenum lectin was expressed by 7-10 days old cultures, while in P. expansum maximum lectin activity was elaborated by 5-8 days old cultures. Lectin extracts from all the three species were found to possess antimicrobial activities. Lectin extracts from the three Penicillium species displayed antifungal activity and antibacterial activity against Gram-negative and Gram-positive bacterial strains.

A comparative study on cell disruption methods for release of aspartase from E. coli K-12

Applicability of different mechanical cell disruption techniques namely sonication, bead milling and French press for the release of aspartase from E. coli K-12 was compared. Various operating parameters of each technique were optimized to obtain maximum aspartase release. The efficiency of aspartase release and cell disruption by all the methods was also compared under optimal conditions. The maximum release of aspartase (98.22%) and maximum cell breakage (84.25%) was observed using French press, while 92% of aspartase release was obtained by both sonication and bead milling. The order of cell disruption constant (k) for aspartase release by these methods was French press > bead milling > sonication. Disruption of cells using French press also demonstrated maximum protein release (14.12 mg/mL). The crude enzyme preparations can be further used for purification and its applications.

Degradation kinetics of chlorpyrifos and 3,5,6-trichloro-2-pyridinol (TCP) by fungal communities

Fungal isolates obtained from soil were used for degrading chlorpyrifos (CP) and TCP. The percentage degradation ranged from 69.4 to 89.8 for CP and 62.2 to 92.6 for TCP after one week. The values of K(s) and V(max) were different for different isolates. The K(s) ranged from 66.66 to 169.5mg/L and V(max) from 6.56 to 40.4 mg/L/d for CP and from 53.19 to 163.9 mg/L and 3.41 to 40.40 mg/L/d, respectively, for TCP. Fungal community showed high affinity for both CP and TCP. The genetic relatedness of isolate F1 to Aspergillus sp., F2 and F3 to Penicillium sp., F4 to Eurotium sp. and F5 to Emericella sp. were confirmed. The degradation potential was in the order: F1>F2=F3>F4>F5.

Successful therapeutic management of notoedric mange in rodents

A total of six laboratory animals (four rats and two guinea pigs) from "Laboratory Animal Unit, (Govt. Medical College) Patiala" were presented to the Teaching Veterinary Hospital, GADVASU with the history of severe itching, alopecia, erythema, hyperkeratotic skin lesions involving face, head, ears, dorsal body and paws since last 1 month. The other animals of the unit (50 rats and 40 guinea pigs) were reported to have similar lesions. Skin scraping examination from the infested rats and guinea pigs revealed Notoedres spp. mite. The animals were treated with conjunctive drug therapy consisting of ivermectin, enrofloxacin and multivitamins. The treatment resulted in marked clinical improvement on day seven post-treatment and complete healing, with disappearance of crusts and scabs leading to normal skin, was recorded by day 25 post-treatment.

Geographic variation in Drosophila: From molecules to morphology and back

The examination of spatial variation can act as a substitute for temporal variation in population studies. Of particular use in the effort to understand the selective forces that govern spatial variation are the sibling species Drosophila melanogaster and D. simulans. Recent work at the level of both molecules and morphology has uncovered a great deal of spatial variation within and between these two species. Here we summarize these data, with reference to what they tell us about the history and nature of selection operating in these species.

Characterization of different road dusts in opencast coal mining areas of India

Dust from haul and transport roads are the major source of air pollution in opencast coal mining areas. Dust generated during mining operations pollutes air which causes different health problems. Various available techniques are implemented in the field to minimize and control dust in mining areas. However, they are not very effective because dust deposited on road surfaces are not removed by these techniques. For effective control of dust in opencast mining areas, it has to be regularly collected from road surfaces and may be converted into solid form, and subsequently can be used as a domestic fuel considering its physicochemical properties. The present paper describes a comparative study of qualitative and quantitative aspects of road dust samples of four coalfields of India. The pH of the dust was found to be in the range of 5.1-7.7. Moisture, ash, volatile matter, fixed carbon, water-holding capacity, bulk density, and specific gravity of dust samples were found to be in the range of 0.5-3.0%, 45-76%, 12.6-20.0%, 10.2-45.3%, 21.17-31.71%, 1.15-1.70, and 1.73-2.30 g cm(-3), respectively. Observing the overall generation and characteristics of coal dust, it is suggested that coal dust from haul and transport roads of mining areas can be effectively collected and used as domestic fuel.

Antibiotic resistance and pathogenicity factors in Staphylococcus aureus isolated from mastitic Sahiwal cattle

Methicillin-resistant Staphylococcus aureus (MRSA) poses a serious problem in dairy animals suffering from mastitis. In the present study, the distribution of mastitic MRSA and antibiotic resistance was studied in 107 strains of S. aureus isolated from milk samples from 195 infected udders. The characterizations pathogenic factors (adhesin and toxin genes) and antibiotic susceptibility of isolates were carried out using gene amplification and disc diffusion assays, respectively. A high prevalence of MRSA was observed in the tested isolates (13.1%). The isolates were also highly resistant to antibiotics, i.e. 36.4% were resistant to streptomycin, 33.6% to oxytetracycline, 29.9% to gentamicin and 26.2% each to chloramphenicol, pristinomycin and ciprofloxacin. A significant variation in the expression of pathogenic factors (Ig, coa and clf) was observed in these isolates. The overall distribution of adhesin genes ebp, fib, bbp, fnbB, cap5, cap8, map and cna in the isolates was found to be 69.1, 67.2, 6.5, 20.5, 60.7, 26.1, 81.3 and 8.4%, respectively. The presence of fib, fnbB, bbp and map genes was considerably greater in MRSA than in methicillin-susceptible S. aureus (MSSA) isolates. The proportions of toxin genes, namely, hlb, seb, sec, sed, seg and sei, in the isolates were found to be 94.3, 0.9, 8.4, 0.9, 10.2 and 49.5%, respectively. The proportions of agr genes I, II, III and IV were found to be 39.2, 27.1, 21.5 and 12.1%, respectively. A few isolates showed similar antibiotic-resistance patterns, which could be due to identical strains or the dissemination of the same strains among animals. These findings can be utilized in mastitis treatment programmes and antimicrobials strategies in organized herd.

Substrate inhibition during bio-filtration of TCE using diazotrophic bacterial community

The kinetics of biodegradation of TCE in the biofilter packed with wood charcoal and inoculated with diazotrophic bacterial community had been investigated. Use of Michaelis-Menten type model showed that substrate inhibition was present in the system. The kinetic model proposed by Edwards (1970) was used to calculate kinetic parameters-maximum elimination capacity (EC(max)), substrate constant (K(s)), and inhibition constant (K(I)). The model fitted well with the experimental data and the EC(max) was found to be in the range of 10.8-6.1 g/m(3) h. The K(s) values depended upon substrate concentration and ranged from 0.024 to 0.043 g/m(3) indicating the high affinity of diazotrophs for TCE. The K(I) values were low and nearly constant (0.011-0.015 g/m(3)) indicating a moderate substrate inhibition.

Kinetics of bio-filtration of trichloroethylene by methanotrophs in presence of methanol

The biodegradation of TCE was studied in a laboratory scale biofilter packed with wood charcoal and inoculated with mixed culture of methanotrophs isolated from local soil. The removal efficiency was found to be higher than 90% up to an inlet load of 5.1g/m(3)h. The maximum elimination capacity was 6.7g/m(3)h at an inlet loading rate of 11.3g/m(3)h. The reaction constants EC(max,)K(s) and K(i) calculated from the experimental results are also presented. The biodegradation process is found to be inhibited at higher TCE concentration. The carbon dioxide production rate has been found to be a linear function of elimination capacity. The DNA finger printing techniques has indicated the presence of functionally active methanotrophic community including Methylocystis sp. in the biofilter.

Importance of conduction electron correlation in a Kondo lattice, Ce₂CoSi₃

Kondo systems are usually described by the interaction of the correlation induced local moments with the highly itinerant conduction electrons. Here, we study the role of electron correlations among conduction electrons in the electronic structure of a Kondo lattice compound, Ce₂CoSi₃, using high resolution photoemission spectroscopy and ab initio band structure calculations, where Co 3d electrons contribute in the conduction band. High energy resolution employed in the measurements helped to reveal the signatures of Ce 4f states derived Kondo resonance features at the Fermi level and the dominance of Co 3d contributions at higher binding energies in the conduction band. The lineshape of the experimental Co 3d band is found to be significantly different from that obtained from the band structure calculations within the local density approximations, LDA. Consideration of electron-electron Coulomb repulsion, U, among Co 3d electrons within the LDA + U method leads to a better representation of experimental results. The signature of an electron correlation induced satellite feature is also observed in the Co 2p core level spectrum. These results clearly demonstrate the importance of the electron correlation among conduction electrons in deriving the microscopic description of such Kondo systems.

Extensive variation and heteroplasmy in size of mitochondrial DNA among geographic populations of Drosophila melanogaster

Size variation and heteroplasmy in mitochondrial DNA (mtDNA) are relatively common in natural populations of Drosophila melanogaster. Of 92 isofemale lines of flies obtained from various geographic regions throughout the world, 75 lines were homoplasmic and showed a total of 12 different mtDNA size classes. The remaining 17 lines were heteroplasmic, each line carrying two different mtDNAs, and, in all but one case, the mtDNAs in these heteroplasmic lines differed in size; a total of nine size classes was represented among them. In cases where one type was predominant within an individual, it was usually the smaller mtDNA. This finding parallels what was observed in homoplasmic lines, in that the smaller mtDNAs were much more common than the larger variants in most populations. The data suggest a high rate of mutational occurrence of mtDNA size variants and some natural selection against them.

Biofiltration of toluene using wood charcoal as the biofilter media

A laboratory scale biofilter inoculated with Pseudomonas putida (MTCC 102) was used for degradation of toluene present in air. Wood charcoal was used as the filter media and a layer of glass beads (6mm) was used for improved air distribution. The biofilter was operated continuously for a period of 5months at four different flow rates - 0.06, 0.12, 0.18, and 0.24m(3)h(-1), with inlet concentration of toluene ranging from 0.04 to 4.5gm(-3). Air having toluene vapor was fed to the biofilter at various loadings ranging from 30.6 to 1104.5gm(-3)h(-1). The removal efficiency was obtained in the range of 70-99.5%. The maximum elimination capacity of 872.5gm(-3)h(-1) was observed at the inlet load of 1104.5gm(-3)h(-1). Wood charcoal was found to an effective biofilter media for toluene biodegradation.

Bio-filtration of trichloroethylene using diazotrophic bacterial community

Biodegradation of TCE was studied in a biofilter packed with wood charcoal and inoculated with diazotrophic bacterial community isolated from local soil. Steady state TCE removal efficiencies higher than 85% were observed up to inlet load of 2.866 g m(-3) h(-1). The maximum elimination capacity of 5.31 g m(-3) h(-1) was observed at an inlet load of more than 7.90 g m(-3) h(-1). The biofilter was sensitive to fluctuations in the process conditions but could easily recover its performance after 10 days shutdown. Almost constant and small pressure drop per unit length and very negligible compaction was observed during the whole experimental period. The molecular analyses such as RT-PCR and gene sequencing revealed the presence of functionally active Azospirillum species in the biofilm.