Toward chronopharmaceutical drug delivery patches and biomaterial coatings for the facilitation of wound healing

Implantation of a biomaterial entails a form of injury where the integration of the implant into the host tissue greatly depends on the proper healing of the wound. Wound healing, itself, consists of a number of physiological processes, each occurring within a characteristic time window. A composite, multilayered polymeric drug delivery carrier for adhesion to the wound site and its supply with molecules released at precise time windows at which the stages in the healing process that they target occur is conceptualized here. We also present a simplified version of one such multilayered composite fabricated by a combination of solvent casting and dip coating, comprising the base poly(ε-caprolactone) layer reinforced with hydroxyapatite nanoparticles, poly(glutamic acid) mesolayer and poly-l-lysine surface layer, each loaded with specific small molecules and released at moderately distinct timescales, partially matching the chronology of wound healing. To that end, the base layer proved suitable for the delivery of an anti-inflammatory molecule or an angiogenic agent, the mesolayer appeared appropriate for the delivery of an epithelialization promoter or a granulation factor, and the adhesive surface layer interfacing directly with the site of injury showed promise as a carrier of a vasodilator. The drug release mechanisms were diffusion-driven, suggesting that the drug/carrier interaction is a key determinant of the release kinetics, as important as the nature of the polymer and its hydrolytic degradation rate in the aqueous medium. Morphological and phase composition analyses were performed, along with the cell compatibility ones, demonstrating solid adhesion and proliferation of both transformed and primary fibroblasts on both surfaces of the composite films. The design of the multilayered composite drug delivery carriers presented here is prospective, but requires further upgrades to achieve the ideal of a perfect timing of the sequential drug release kinetics and a perfect resonance with the physiological processes defining the chronology of wound healing.

Tunable Release of Calcium from Chitosan-Coated Bioglass

Bioglass presents a standard biomaterial for regeneration of hard tissues in orthopedics and dentistry. The notable osteo-inductive properties of bioglass are largely due to the release of calcium ions from it. However, this release is not easily controllable and can often be excessive, especially during the initial interaction of the biomaterial with the surrounding tissues. Consequently, this excessive release can deplete the calcium content of the bioglass, ultimately reducing its overall bioactivity. In this study, we have tested if applying biopolymer chitosan coatings of different thicknesses would be able to mitigate and regulate the calcium ion release from monodisperse bioglass nanoparticles. Calcium release was assessed for four different chitosan coating thicknesses at different time points over the period of 28 days using a fluorescence quencher. Expectedly, chitosan-coated particles released less calcium as the concentration of chitosan in the coating solution increased, presumably due to the increased thickness of the chitosan coating around the bioglass particles. The mechanism of release remained constant for each coating thickness, corresponding to anomalous, non-Fickian diffusion, but the degree of anomalousness increased with the deposition of chitosan. Zeta potential testing showed an expected increase in the positive double layer charge following the deposition of the chitosan coating due to the surface exposure of the amine groups of chitosan. Less intuitively, the zeta potential became less positive as thickness of the chitosan coating increased, attesting to the lower density of the surface charges within thicker coatings than within the thinner ones. Overall, the findings of this study demonstrate that chitosan coating efficiently prevents the early release of calcium from bioglass. This coating procedure also allows for the tuning of the calcium release kinetics by controlling the chitosan concentration in the parent solution.

Current and Future Technologies for the Detection of Antibiotic-Resistant Bacteria

Antibiotic resistance is a global public health concern, posing a significant threat to the effectiveness of antibiotics in treating bacterial infections. The accurate and timely detection of antibiotic-resistant bacteria is crucial for implementing appropriate treatment strategies and preventing the spread of resistant strains. This manuscript provides an overview of the current and emerging technologies used for the detection of antibiotic-resistant bacteria. We discuss traditional culture-based methods, molecular techniques, and innovative approaches, highlighting their advantages, limitations, and potential future applications. By understanding the strengths and limitations of these technologies, researchers and healthcare professionals can make informed decisions in combating antibiotic resistance and improving patient outcomes.

Grand Challenges in Materials Science: A Special Issue

Materials science has and will continue to be a science at a crossroads [...].

Characterization of stability, safety and immunogenicity of the mRNA lipid nanoparticle vaccine Iribovax® against COVID-19 in nonhuman primates

mRNA-lipid nanoparticle (mRNA-LNP) vaccines have proved their efficacy, versatility and unprecedented manufacturing speed during the COVID-19 pandemic. Here we report on the physicochemical properties, thermostability, immunogenicity, and protective efficacy of the nucleoside-modified mRNA-LNP vaccine candidate Iribovax® (also called SNEG2c). Injection of BALB/c mice, rabbits and nonhuman primates with two doses of SNEG2c induced production of high-titers of SARS-CoV-2 spike-specific and receptor-binding domain (RBD)-neutralizing antibodies in immunized animals. In addition to the strong humoral response, SNEG2c elicited substantial Th1-biased T-cell response. Sera from rhesus macaques immunized with a low dose of the vaccine showed robust spike-specific antibody titers 3-24× as high as those in convalescent sera from a panel of COVID-19 patients and 50% virus neutralization geometric mean titer of 1024 against SARS-CoV-2. Strikingly, immunization with SNEG2c completely cleared infectious SARS-CoV-2 from the upper and lower respiratory tracts of challenged macaques and protected them from viral-induced lung and trachea lesions. In contrast, the non-vaccinated macaques developed moderate to severe pulmonary pathology after the viral challenge. We present the results of repeat-dose and local tolerance toxicity and thermostability studies showing how the physicochemical properties of the mRNA-LNPs change over time and demonstrating that SNEG2 is safe, well tolerated and stable for long-term. These results support the planned human trials of SNEG2c.

Understanding the challenges to COVID-19 vaccines and treatment options, herd immunity and probability of reinfection

Unlike pandemics in the past, the outbreak of coronavirus disease 2019 (COVID-19), which rapidly spread worldwide, was met with a different approach to control and measures implemented across affected countries. The lack of understanding of the fundamental nature of the outbreak continues to make COVID-19 challenging to manage for both healthcare practitioners and the scientific community. Challenges to vaccine development and evaluation, current therapeutic options, convalescent plasma therapy, herd immunity, and the emergence of reinfection and new variants remain the major obstacles to combating COVID-19. This review discusses these challenges in the management of COVID-19 at length and highlights the mechanisms needed to provide better understanding of this pandemic.

Lessons from the history of inorganic nanoparticles for inhalable diagnostics and therapeutics

The respiratory tract is one of the most accessible ones to exogenous nanoparticles, yet drug delivery by their means to it is made extraordinarily challenging because of the plexus of aerodynamic, hemodynamic and biomolecular factors at cellular and extracellular levels that synergistically define the safety and efficacy of this process. Here, the use of inorganic nanoparticles (INPs) for inhalable diagnostics and therapies of the lung is viewed through the prism of the history of studies on the interaction of INPs with the lower respiratory tract. The most conceptually and methodologically innovative and illuminative studies are referred to in the chronological order, as they were reported in the literature, and the trends in the progress of understanding this interaction of immense therapeutic and toxicological significance are being deduced from it. The most outstanding actual trends delineated include the diminishment of toxicity via surface functionalization, cell targeting, tagging and tracking via controlled binding and uptake, hybrid INP treatments, magnetic guidance, combined drug and gene delivery, use as adjuvants in inhalable vaccines, and other. Many of the understudied research directions, which have been accomplished by the nanostructured organic polymers in the pulmonary niche, are discussed. The progress in the use of INPs as inhalable diagnostics or therapeutics has been hampered by their well-recognized inflammatory potential and toxicity in the respiratory tract. However, the annual numbers of methodologically innovative studies have been on the rise throughout the past two decades, suggesting that this is a prolific direction of research, its comparatively poor commercial takings notwithstanding. Still, the lack of consensus on the effects of many INP compositions at low but therapeutically effective doses, the plethora of contradictory reports on ostensibly identical chemical compositions and NP properties, and the many cases of antagonism in combinatorial NP treatments imply that the rational design of inhalable medical devices based on INPs must rely on qualitative principles for the most part and embrace a partially stochastic approach as well. At the same time, the fact that the most studied INPs for pulmonary applications have been those with some of the thickest records of pulmonary toxicity, e.g., carbon, silver, gold, silica and iron oxide, is a silent call for the expansion of the search for new inorganic compositions for use in inhalable therapies to new territories.

Natural sciences and chess: A romantic relationship missing from higher education curricula

Chess is a game that delicately weaves analytical thinking around artistic experience, yet recent conversions of STEM (Science-Technology-Engineering-Mathematics) to STEAM (Science-Technology-Engineering-Art-Mathematics) have omitted adding chess as an elementary coursework to K-12 and higher education curricula. Chess, as per arguments presented in this essay, can be considered as a language and a tool for furthering the development of artistic skills among scientists and analytical, pattern-recognition skills among artists. It can also serve as a missing link between science and art in STEAM curricula thanks to its finding itself halfway between the two. A handful of analogies are drawn here from chess, illustrated sporadically with positions from real-life chess games and converted to lessons in creativity for students in natural sciences. The discussion centered around these analogies is reinforced by a literature review of studies conducted over the past 80 years to assess the effect of exposing students to lessons in chess on their learning in distant domains. Overall, great benefits can emerge from complementing science education with chess and it is hoped that chess will become an integral part of basic education in primary schools and universities worldwide in the near future.

An overview of the vaccine platforms to combat COVID-19 with a focus on the subunit vaccines

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is an emerging virus that has caused the recent coronavirus disease (COVID-19) global pandemic. The current approved COVID-19 vaccines have shown considerable efficiency against hospitalization and death. However, the continuation of the pandemic for more than two years and the likelihood of new strain emergence despite the global rollout of vaccination highlight the immediate need for the development and improvement of vaccines. mRNA, viral vector, and inactivated virus vaccine platforms were the first members of the worldwide approved vaccine list. Subunit vaccines. which are vaccines based on synthetic peptides or recombinant proteins, have been used in lower numbers and limited countries. The unavoidable advantages of this platform, including safety and precise immune targeting, make it a promising vaccine with wider global use in the near future. This review article summarizes the current knowledge on different vaccine platforms, focusing on the subunit vaccines and their clinical trial advancements against COVID-19.

Exploration of potential inhibitors for SARS-CoV-2 Mpro considering its mutants via structure-based drug design, molecular docking, MD simulations, MM/PBSA, and DFT calculations

The main protease (Mpro) of SARS-COV-2 plays a vital role in the viral life cycle and pathogenicity. Due to its specific attributes, this 3-chymotrypsin like protease can be a reliable target for the drug design to combat COVID-19. Since the advent of COVID-19, Mpro has undergone many mutations. Here, the impact of 10 mutations based on their frequency and five more based on their proximity to the active site was investigated. For comparison purposes, the docking process was also performed against the Mpros of SARS-COV and MERS-COV. Four inhibitors with the highest docking score (11b, α-ketoamide 13b, Nelfinavir, and PF-07321332) were selected for the structure-based ligand design via fragment replacement, and around 2000 new compounds were thus obtained. After the screening of these new compounds, the pharmacokinetic properties of the best ones were predicted. In the last step, comparative molecular dynamics (MD) simulations, molecular mechanics Poisson-Boltzmann surface area calculations (MM/PBSA), and density functional theory calculations were performed. Among the 2000 newly designed compounds, three of them (NE1, NE2, and NE3), which were obtained by modifications of Nelfinavir, showed the highest affinity against all the Mpro targets. Together, NE1 compound is the best candidate for follow-up Mpro inhibition and drug development studies.

In silico design of a multi-epitope vaccine against the spike and the nucleocapsid proteins of the Omicron variant of SARS-CoV-2

Computational studies can comprise an effective approach to treating and preventing viral infections. Since 2019, the world has been dealing with the outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The most important achievement in this short period of time in the effort to reduce morbidity and mortality was the production of vaccines and effective antiviral drugs. Although the virus has been significantly suppressed, it continues to evolve, spread, and evade the host's immune system. Recently, researchers have turned to immunoinformatics tools to reduce side effects and save the time and cost of traditional vaccine production methods. In the present study, an attempt has been made to design a multi-epitope vaccine with humoral and cellular immune response stimulation against the Omicron variant of SARS-CoV-2 by investigating new mutations in spike (S) and nucleocapsid (N) proteins. The population coverage of the vaccine was evaluated as appropriate compared to other studies. The results of molecular dynamics simulation and molecular mechanics/generalized Born surface area (MM/GBSA) calculations predict the stability and proper interaction of the vaccine with Toll-like receptor 4 (TLR-4) as an innate immune receptor. The results of the immune simulation show a significant increase in the coordinated response of IgM and IgG after the third injection of the vaccine. Also, in the continuation of the research, spike proteins from BA.4 and BA.5 lineages were screened by immunoinformatics filters and effective epitopes were suggested for vaccine design. Despite the high precision of computational studies, in-vivo and in-vitro research is needed for final confirmation.Communicated by Ramaswamy H. Sarma.

Supplementation of Polymeric Reservoirs with Redox-Responsive Metallic Nanoparticles as a New Concept for the Smart Delivery of Insulin in Diabetes

Type 1 diabetes is caused by the inability of the pancreatic beta cells to produce sufficient amounts of insulin, an anabolic hormone promoting the absorption of the blood glucose by various cells in the body, primarily hepatocytes and skeletal muscle cells. This form of impaired metabolism has been traditionally treated with subcutaneous insulin injections. However, because one such method of administration does not directly correspond to the glucose concentrations in the blood and may fail to reduce hyperglycemia or cause hypoglycemia, the delivery of insulin in a glucose-dependent manner has been researched intensely in the present and past. This study tested the novel idea that the supplementation of polymeric reservoirs containing insulin with metallic nanoparticle precursors responsive to the redox effect of glucose could be used to create triggers for the release of insulin in direct response to the concentration of glucose in the tissue. For that purpose, manganese oxide nanoparticles were dispersed inside a poly(ε-caprolactone) matrix loaded with an insulin proxy and the resulting composite was exposed to different concentrations of glucose. The release of the insulin proxy occurred in direct proportion to the concentration of glucose in the medium. Mechanistically, as per the central hypothesis of the study, glucose reduced the manganese cations contained within the metal oxide phase, forming finer and more dissipative zero-valent metallic nanoparticles, thus disrupting the polymeric network, opening up pores in the matrix and facilitating the release of the captured drug. The choice of manganese for this study over other metals was justified by its use as a supplement for protection against diabetes. Numerical analysis of the release mechanism revealed an increasingly nonlinear and anomalous release accompanied by a higher diffusion rate at the expense of chain rigidity as the glucose concentration increased. Future studies should focus on rendering the glucose-controlled release (i) feasible within the physiological pH range and (ii) sensitive to physiologically relevant glucose concentrations. These technical improvements of the fundamental new concept proven here may bring it closer to a real-life application for the mitigation of symptoms of hyperglycemia in patients with diabetes.

Micronesian maritime piloting charts as bioimaging proxies for the rescue of cells on the apoptotic trajectory

This interdisciplinary study falls within the realm of ethnoscience thanks to its resorting to the scientific methods behind the Micronesian canoe voyaging in search of bioimaging tools for the early prediction of cell fate in response to a therapy. Two distinct indigenous methods for navigation across the ocean were assessed as bridges for correlating (i) the interaction of oceanic swells near atolls with the way microcurrents in the cell culture dish may shape the morphology of cells, and (ii) the spatial arrangement of cultured cells with the canoe voyaging from one island to the next. Both methods effectively predicted the cell fate at early time points in the treatment with superparamagnetic nanoparticles, when the adverse effects were still reversible and not apparent yet at the levels of cell morphology, proliferation rate or confluence. The mattang chart, the most fundamental and theoretical of navigational devices used in the Marshallese seafaring tradition, was used to measure subtle morphological changes occurring in cells due to the treatment. The cells subjected to the treatment were consistently withdrawing their bodies from the areas of intense swell interaction activity on the superimposed mattangs. Given that the cytoskeletal microfilaments defining the features of control cells were largely filling up these areas, this metric proved useful for deducing the course of the treatment at its early stages. The same deduction was proven feasible with the use of a Carolinian navigational technique based on the concept of the etak, in which case the distances traversable between cells in a population subjected to the treatment were divisible to a significantly higher number of etaks than the same distances in the population of control cells. Therefore, treating cells and their nuclei as analogous to Pacific atolls navigable to and fro with the use of imaginary microscopic canoes and the navigational principles native to the Marshall and the Caroline Islands proves as a clever, but also very effective cell fate prediction approach, which various branches of biomedical science could take advantage of. These practical benefits notwithstanding, this conceptual study was performed primarily with a goal to spark the interest in studying these and other ancient ethnoscientific inventions as potential addenda to the broad repertoire of techniques used in biomedical and other sciences to combat some of their greatest challenges.

Nanoparticles for the treatment of glaucoma-associated neuroinflammation

Recently, a considerable amount of literature has emerged around the theme of neuroinflammation linked to neurodegeneration. Glaucoma is a neurodegenerative disease characterized by visual impairment. Understanding the complex neuroinflammatory processes underlying retinal ganglion cell loss has the potential to improve conventional therapeutic approaches in glaucoma. Due to the presence of multiple barriers that a systemically administered drug has to cross to reach the intraocular space, ocular drug delivery has always been a challenge. Nowadays, studies are focused on improving the current therapies for glaucoma by utilizing nanoparticles as the modes of drug transport across the ocular anatomical and physiological barriers. This review offers some important insights on the therapeutic advancements made in this direction, focusing on the use of nanoparticles loaded with anti-inflammatory and neuroprotective agents in the treatment of glaucoma. The prospect of these novel therapies is discussed in relation to the current therapies to alleviate inflammation in glaucoma, which are being reviewed as well, along with the detailed molecular and cellular mechanisms governing the onset and the progression of the disease.

Altering Microbiomes with Hydroxyapatite Nanoparticles: A Metagenomic Analysis

Hydroxyapatite (HAp), the most abundant biological material among mammals, has been recently demonstrated to possess moderate antibacterial properties. Metagenomics provides a series of tools for analyzing the simultaneous interaction of materials with larger communities of microbes, which may aid in optimizing the antibacterial activity of a material such as HAp. Here, a microbiome intrinsic to the sample of sandy soil collected from the base of an African Natal plum (Carissa macrocarpa) shrub surrounding the children's sandbox at the Arrowhead Park in Irvine, California was challenged with HAp nanoparticles and analyzed with next-generation sequencing for hypervariable 16S ribosomal DNA base pair homologies. HAp nanoparticles overwhelmingly reduced the presence of Gram-negative phyla, classes, orders, families, genera and species, and consequently elevated the relative presence of their Gram-positive counterparts. Thermodynamic, electrostatic and chemical bonding arguments were combined in a model proposed to explain this selective affinity. The ability of amphiphilic surface protrusions of lipoteichoic acid in Gram-positive bacteria and mycolic acid in mycobacteria to increase the dispersibility of the bacterial cells and assist in their resistance to capture by the solid phase is highlighted. Within the Gram-negative group, the variability of the distal, O-antigen portion of the membrane lipopolysaccharide was shown to be excessive and the variability of its proximal, lipid A portion insufficient to explain the selectivity based on chemical sequence arguments. Instead, flagella-driven motility proves to be a factor favoring the evasion of binding to HAp. HAp displayed a preference toward binding to less pathogenic bacteria than those causative of disease in humans, while taxa having a positive agricultural effect were largely captured by HAp, indicating an evolutionary advantage this may have given it as a biological material. The capacity to selectively sequester Gram-negative microorganisms and correspondingly alter the composition of the microbiome may open up a new avenue in environmental and biomedical applications of HAp.

Polymeric Nanotechnologies for the Treatment of Periodontitis: A Chronological Review

Periodontitis is a chronic infectious and inflammatory disease of periodontal tissues estimated to affect 70 - 80 % of all adults. At the same time, periodontium, the site of periodontal pathologies, is an extraordinarily complex plexus of soft and hard tissues, the regeneration of which using even the most advanced forms of tissue engineering continues to be a challenge. Nanotechnologies, meanwhile, have provided exquisite tools for producing biomaterials and pharmaceutical formulations capable of elevating the efficacies of standard pharmacotherapies and surgical approaches to whole new levels. A bibliographic analysis provided here demonstrates a continuously increasing research output of studies on the use of nanotechnologies in the management of periodontal disease, even when they are normalized to the total output of studies on periodontitis. The great majority of biomaterials used to tackle periodontitis, including those that pioneered this interesting field, have been polymeric. In this article, a chronological review of polymeric nanotechnologies for the treatment of periodontitis is provided, focusing on the major conceptual innovations since the late 1990s, when the first nanostructures for the treatment of periodontal diseases were fabricated. In the opening sections, the etiology and pathogenesis of periodontitis and the anatomical and histological characteristics of the periodontium are being described, along with the general clinical manifestations of the disease and the standard means of its therapy. The most prospective chemistries in the design of polymers for these applications are also elaborated. It is concluded that the amount of innovation in this field is on the rise, despite the fact that most studies are focused on the refinement of already established paradigms in tissue engineering rather than on the development of revolutionary new concepts.

When Nothing Turns Itself Inside out and Becomes Something: Coating Poly (Lactic-Co-Glycolic Acid) Spheres with Hydroxyapatite Nanoparticles vs. the Other Way Around

To stabilize drugs physisorbed on the surface of hydroxyapatite (HAp) nanoparticles and prevent burst release, these nanoparticles are commonly coated with polymers. Bioactive HAp, however, becomes shielded from the surface of such core/shell entities, which partially defeats the purpose of using it. The goal of this study was to assess the biological and pharmacokinetic effects of inverting this classical core/shell structure by coating poly(lactic-co-glycolic acid) (PLGA) spheres with HAp nanoparticles. The HAp shell did not hinder the release of vancomycin; rather, it increased the release rate to a minor degree, compared to that from undecorated PLGA spheres. The decoration of PLGA spheres with HAp induced lesser mineral deposition and lesser upregulation of osteogenic markers compared to those induced by the composite particles where HAp nanoparticles were embedded inside the PLGA spheres. This was explained by homeostatic mechanisms governing the cell metabolism, which ensure than the sensation of a product of this metabolism in the cell interior or exterior is met with the reduction in the metabolic activity. The antagonistic relationship between proliferation and bone production was demonstrated by the higher proliferation rate of cells challenged with HAp-coated PLGA spheres than of those treated with PLGA-coated HAp. It is concluded that the overwhelmingly positive response of tissues to HAp-coated biomaterials for bone replacement is unlikely to be due to the direct induction of new bone growth in osteoblasts adhering to the HAp coating. Rather, these positive effects are consequential to more elementary aspects of cell attachment, mechanotransduction, and growth at the site of contact between the HAp-coated material and the tissue.

Comparative molecular dynamics study of the receptor-binding domains in SARS-CoV-2 and SARS-CoV and the effects of mutations on the binding affinity

Here, we report on a computational comparison of the receptor-binding domains (RBDs) on the spike proteins of severe respiratory syndrome coronavirus-2 (SARS-CoV-2) and SARS-CoV in free forms and as complexes with angiotensin-converting enzyme 2 (ACE2) as their receptor in humans. The impact of 42 mutations discovered so far on the structure and thermodynamics of SARS-CoV-2 RBD was also assessed. The binding affinity of SARS-CoV-2 RBD for ACE2 is higher than that of SARS-CoV RBD. The binding of COVA2-04 antibody to SARS-CoV-2 RBD is more energetically favorable than the binding of COVA2-39, but also less favorable than the formation of SARS-CoV-2 RBD-ACE2 complex. The net charge, the dipole moment and hydrophilicity of SARS-CoV-2 RBD are higher than those of SARS-CoV RBD, producing lower solvation and surface free energies and thus lower stability. The structure of SARS-CoV-2 RBD is also more flexible and more open, with a larger solvent-accessible surface area than that of SARS-CoV RBD. Single-point mutations have a dramatic effect on distribution of charges, most prominently at the site of substitution and its immediate vicinity. These charge alterations alter the free energy landscape, while X→F mutations exhibit a stabilizing effect on the RBD structure through π stacking. F456 and W436 emerge as two key residues governing the stability and affinity of the spike protein for its ACE2 receptor. These analyses of the structural differences and the impact of mutations on different viral strains and members of the coronavirus genera are an essential aid in the development of effective therapeutic strategies. Communicated by Ramaswamy H. Sarma.

Brain-Derived Neurotrophic Factor-Mediated Neuroprotection in Glaucoma: A Review of Current State of the Art

Retinal ganglion cells (RGCs) are neurons of the visual system that are responsible for transmitting signals from the retina to the brain via the optic nerve. Glaucoma is an optic neuropathy characterized by apoptotic loss of RGCs and degeneration of optic nerve fibers. Risk factors such as elevated intraocular pressure and vascular dysregulation trigger the injury that culminates in RGC apoptosis. In the event of injury, the survival of RGCs is facilitated by neurotrophic factors (NTFs), the most widely studied of which is brain-derived neurotrophic factor (BDNF). Its production is regulated locally in the retina, but transport of BDNF retrogradely from the brain to retina is also crucial. Not only that the interruption of this retrograde transport has been detected in the early stages of glaucoma, but significantly low levels of BDNF have also been detected in the sera and ocular fluids of glaucoma patients, supporting the notion that neurotrophic deprivation is a likely mechanism of glaucomatous optic neuropathy. Moreover, exogenous NTF including BDNF administration was shown reduce neuronal loss in animal models of various neurodegenerative diseases, indicating the possibility that exogenous BDNF may be a treatment option in glaucoma. Current literature provides an extensive insight not only into the sources, transport, and target sites of BDNF but also the intracellular signaling pathways, other pathways that influence BDNF signaling and a wide range of its functions. In this review, the authors discuss the neuroprotective role of BDNF in promoting the survival of RGCs and its possible application as a therapeutic tool to meet the challenges in glaucoma management. We also highlight the possibility of using BDNF as a biomarker in neurodegenerative disease such as glaucoma. Further we discuss the challenges and future strategies to explore the utility of BDNF in the management of glaucoma.

Applications of Alginate-Based Nanomaterials in Enhancing the Therapeutic Effects of Bee Products

Since the ancient times, bee products (i.e., honey, propolis, pollen, bee venom, bee bread, and royal jelly) have been considered as natural remedies with therapeutic effects against a number of diseases. The therapeutic pleiotropy of bee products is due to their diverse composition and chemical properties, which is independent on the bee species. This has encouraged researchers to extensively study the therapeutic potentials of these products, especially honey. On the other hand, amid the unprecedented growth in nanotechnology research and applications, nanomaterials with various characteristics have been utilized to improve the therapeutic efficiency of these products. Towards keeping the bee products as natural and non-toxic therapeutics, the green synthesis of nanocarriers loaded with these products or their extracts has received a special attention. Alginate is a naturally produced biopolymer derived from brown algae, the desirable properties of which include biodegradability, biocompatibility, non-toxicity and non-immunogenicity. This review presents an overview of alginates, including their properties, nanoformulations, and pharmaceutical applications, placing a particular emphasis on their applications for the enhancement of the therapeutic effects of bee products. Despite the paucity of studies on fabrication of alginate-based nanomaterials loaded with bee products or their extracts, recent advances in the area of utilizing alginate-based nanomaterials and other types of materials to enhance the therapeutic potentials of bee products are summarized in this work. As the most widespread and well-studied bee products, honey and propolis have garnered a special interest; combining them with alginate-based nanomaterials has led to promising findings, especially for wound healing and skin tissue engineering. Furthermore, future directions are proposed and discussed to encourage researchers to develop alginate-based stingless bee product nanomedicines, and to help in selecting suitable methods for devising nanoformulations based on multi-criteria decision making models. Also, the commercialization prospects of nanocomposites based on alginates and bee products are discussed. In conclusion, preserving original characteristics of the bee products is a critical challenge in developing nano-carrier systems. Alginate-based nanomaterials are well suited for this task because they can be fabricated without the use of harsh conditions, such as shear force and freeze-drying, which are often used for other nano-carriers. Further, conjunction of alginates with natural polymers such as honey does not only combine the medicinal properties of alginates and honey, but it could also enhance the mechanical properties and cell adhesion capacity of alginates.

Factors influencing the drug release from calcium phosphate cements

Thanks to their biocompatibility, biodegradability, injectability and self-setting properties, calcium phosphate cements (CPCs) have been the most economical and effective biomaterials of choice for use as bone void fillers. They have also been extensively used as drug delivery carriers owing to their ability to provide for a steady release of various organic molecules aiding the regeneration of defective bone, including primarily antibiotics and growth factors. This review provides a systematic compilation of studies that reported on the controlled release of drugs from CPCs in the last 25 years. The chemical, compositional and microstructural characteristics of these systems through which the control of the release rates and mechanisms could be achieved have been discussed. In doing so, the effects of (i) the chemistry of the matrix, (ii) porosity, (iii) additives, (iv) drug types, (v) drug concentrations, (vi) drug loading methods and (vii) release media have been distinguished and discussed individually. Kinetic specificities of in vivo release of drugs from CPCs have been reviewed, too. Understanding the kinetic and mechanistic correlations between the CPC properties and the drug release is a prerequisite for the design of bone void fillers with drug release profiles precisely tailored to the application area and the clinical picture. The goal of this review has been to shed light on these fundamental correlations.

Doxorubicin-loaded, pH-sensitive Albumin Nanoparticles for Lung Cancer Cell Targeting

In recent decades, scientific and medical communities have continuously sought new methods and chemistries to improve the treatment of cancer. Among many types of nanoparticles considered as carriers for drug delivery, the protein ones count among the safest. The present study aimed to investigate the physicochemical and biological effects of the supplementation of albumin nanoparticles with doxorubicin (DOX). DOX was co-precipitated with albumin in a desolvation process and entrapped inside the cross-linked albumin nanoparticles, where it disrupted the protein structure at various levels: (a) it reduced the particle size distribution homogeneity; (b) it extended the peptide bond length; (c) it lowered the thermal stability of albumin; (d) it lowered the crystallinity of the protein. Physicochemical mechanisms underlying these changes are discussed. The drug release was incomplete under the physiological conditions, but the nanoparticles fully released their chemotherapeutic payload when pH was decreased by a single unit from the physiological value. Because the extracellular pH of tumors is usually by a single pH unit lower than that of healthy tissues, this environmentally responsive drug delivery system composed of albumin nanoparticles may be applicable in the targeting of cancer cells. In vitro assays against human lung cancer cells demonstrated that DOX released from albumin nanoparticles had a four times higher apoptotic activity than the equivalent concentration of free DOX. The ability of albumin to prevent the agglomeration of partially hydrophobic DOX and release it at a sustained, zero-order rate over the first 12 h of incubation, with no burst effect, explains this ability to augment the activity of DOX against the lung cancer cells.

Antibacterial and cell-friendly copper-substituted tricalcium phosphate ceramics for biomedical implant applications

The development of new materials with antibacterial properties and the scope to decrease or eliminate the excessive antibiotic use is an urgent priority due to the growing antibiotic resistance-related mortalities. New bone substitute materials with intrinsic antibacterial characteristics are highly requested for various clinical applications. In this study, the choice of copper ions as substitutes for calcium in tricalcium phosphate (TCP) has been justified by their pronounced broad-spectrum antibacterial properties. Copper-substituted TCP (Cu-TCP) ceramics with the copper content of 1.4 and 0.1 wt% were synthesized by mechano-chemical activation. X-ray diffraction (XRD) analyses established that both pure and copper-containing compounds adopted the structure of whitlockite (β-TCP). XRD and electron paramagnetic resonance (EPR) spectroscopy revealed the partial isovalent substitution of calcium ions with copper ions in the β-TCP lattice. With the use of infrared and EPR spectroscopies, it was detected that carbonate ions got incorporated into the β-TCP structure during the synthesis procedure. By releasing the tension in the M(5)O6 octahedron consequential to the lower CaO bond length than the corresponding sum of ionic radii, the substitution of calcium with smaller copper ions stabilizes the structure of β-TCP. As concluded form the thermal analyses, the introduction of Cu prevented the polymorphic transformation of β- to α-TCP. At the same time, the introduction of Cu to the β-TCP structure enhanced the crystal growth and porosity of the ceramics, which had a positive effect on the cytocompatibility of the material. The MTT colorimetric assay showed that the metabolic activity of the mouse fibroblast NCTC L929 cell line during 24 h of incubation with 3-day extracts from Cu-TCP (1.4 wt%) and β-TCP pellets in the cell culture medium was similar to the negative control, indicating the absence of any inhibitory effects on cells. The seeding and the growth of human dental pulp stem cells on the surface of Cu-TCP (1.4 wt%) and β-TCP ceramics also showed the absence of any signs of cytotoxicity. Finally, microbiological assays demonstrated the antibacterial activity of Cu-TCP ceramics against Escherichia coli and Salmonella enteritidis, whereas β-TCP did not exhibit such an activity. Overall, the addition of Cu ions to β-TCP improves its antibacterial properties without diminishing the biocompatibility of the material, thus making it more attractive than pure β-TCP for clinical applications such as synthetic bone grafts and orthopaedic implant coatings.

Hydroxyapatite as a scavenger of reactive radiolysis species in graphene liquid cells forin situelectron microscopy

Liquid cell electron microscopy is an imaging technique allowing for the investigation of the interaction of liquids and solids at nanoscopic length scales. Suchin situobservations are increasingly in-demand in an array of fields, from biological sciences to medicine to batteries. Graphene liquid cells (GLCs), in particular, have generated a great interest as a low-scattering window material with the potential for increasing the quality of both imaging and spectroscopy. However, preserving the stability of the liquid and of the sample in the GLC remains a considerable challenge. In the present work we encapsulate water and hydroxyapatite (HAP), a pH-sensitive biological material, in GLCs to observe the interactions between the graphene, HAP, and the electron beam. HAP was chosen for several reasons. One is its ubiquity in biological specimens such as bones and teeth, and the second is the presence of phosphate ions in common buffer solutions. Finally, there is its sensitivity to changes in pH, which result from beam-induced hydrolysis in liquid cells. A dynamic process of dissolution and recrystallization of HAP was observed, which correlated with the production of H⁺ions by the beam during imaging. In addition, a large increase in the stability of the GLC under irradiation was noted. Specifically, no stable hydrogen bubbles were detected under the electron fluxes routinely exceeding 170 e^-Å^-2s^-1. With the measured threshold dose for the bubble formation in pure water equaling 9 e^-Å^-2s^-1, it was concluded that the presence of HAP increases the resistance of water against radiolysis in the GLC by more than an order of magnitude. These results confirm the possibility of using biological materials, such as HAP, as stabilizers in liquid cell electron microscopy. They outline a potential route for stabilization of specimens in liquid cells through the addition of a scavenger of reactive species generated by the beam-induced hydrolysis of water. These improvements are essential for enhancing both the resolution of imaging and the available imaging time, as well as avoiding the beam-induced artifacts.

Nanoparticles and Gut Microbiota in Colorectal Cancer

Recent years have witnessed an unprecedented growth in the research area of nanomedicine. There is an increasing optimism that nanotechnology applied to medicine will bring significant advances in the diagnosis and treatment of various diseases, including colorectal cancer (CRC), a type of neoplasm affecting cells in the colon or the rectum. Recent findings suggest that the role of microbiota is crucial in the development of CRC and its progression. Dysbiosis is a condition that disturbs the normal microbial environment in the gut and is often observed in CRC patients. In order to detect and treat precancerous lesions, new tools such as nanotechnology-based theranostics, provide a promising option for targeted marker detection or therapy for CRC. Because the presence of gut microbiota influences the route of biomarker detection and the route of the interaction of nanoparticle/drug complexes with target cells, the development of nanoparticles with appropriate sizes, morphologies, chemical compositions and concentrations might overcome this fundamental barrier. Metallic particles are good candidates for nanoparticle-induced intestinal dysbiosis, but this aspect has been poorly explored to date. Herein, we focus on reviewing and discussing nanotechnologies with potential applications in CRC through the involvement of gut microbiota and highlight the clinical areas that would benefit from these new medical technologies.

Tracking the pipeline: immunoinformatics and the COVID-19 vaccine design

With the onset of the COVID-19 pandemic, the amount of data on genomic and proteomic sequences of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) stored in various databases has exponentially grown. A large volume of these data has led to the production of equally immense sets of immunological data, which require rigorous computational approaches to sort through and make sense of. Immunoinformatics has emerged in the recent decades as a field capable of offering this approach by bridging experimental and theoretical immunology with state-of-the-art computational tools. Here, we discuss how immunoinformatics can assist in the development of high-performance vaccines and drug discovery needed to curb the spread of SARS-CoV-2. Immunoinformatics can provide a set of computational tools to extract meaningful connections from the large sets of COVID-19 patient data, which can be implemented in the design of effective vaccines. With this in mind, we represent a pipeline to identify the role of immunoinformatics in COVID-19 treatment and vaccine development. In this process, a number of free databases of protein sequences, structures and mutations are introduced, along with docking web servers for assessing the interaction between antibodies and the SARS-CoV-2 spike protein segments as most commonly considered antigens in vaccine design.

Materials extrusion-inspired engineering reflection of social pressure-induced environmental impact on academy community well-being

BACKGROUND

Existing issues with student mental health are the sources of ongoing violation of academic and educational integrity in learning and instructional dynamics in all educational institutions worldwide.

OBJECTIVE

This didactical paper addresses the practical case of educational integrity violations induced by student mental illness. It presents a thought-provoking unified viewpoint of the existence of a non-obvious geometric analogy between the irreversible psycho-social process of mental disorder growth and the irreversible pressure forming-induced deformation process of materials extrusion through an angular domain.

METHODS

This paper uses the method of geometric analogy between the dynamics of social irreversible processes in human society and technical irreversible processes in materials extrusion.

RESULTS

The novel analogy between the loss of elliptical shape of an initial circular material element within pressure-extruded material and the development of student mental inadequacy during intensive university education was firstly studied and analyzed in detail.

CONCLUSIONS

The author-proposed original socio-technical cross-disciplinary analogy improves and broadens student understanding of nonlinear dynamics both in the technical processes of macroscopic rotation formation in pressure-formed material and in the bio-social processes of psycho-neurological pathology development within a learner's mind.

Nanomedicine for the poor: a lost cause or an idea whose time has yet to come?

The most effective COVID-19 vaccines, to date, utilize nanotechnology to deliver immunostimulatory mRNA. However, their high cost equates to low affordability. Total nano-vaccine purchases per capita and their proportion within the total vaccine lots have increased directly with the GDP per capita of countries. While three out of four COVID-19 vaccines procured by wealthy countries by the end of 2020 were nano-vaccines, this amounted to only one in ten for middle-income countries and nil for the low-income countries. Meanwhile, economic gains of saving lives with nano-vaccines in USA translate to large costs in middle-/low-income countries. It is discussed how nanomedicine can contribute to shrinking this gap between rich and poor instead of becoming an exquisite technology for the privileged. Two basic routes are outlined: (1) the use of qualitative contextual analyses to endorse R&D that positively affects the sociocultural climate; (2) challenging the commercial, competitive realities wherein scientific innovation of the day operates.

Gold nanoparticles conjugated with anti-CD133 monoclonal antibody and 5-fluorouracil chemotherapeutic agent as nanocarriers for cancer cell targeting

The enhanced permeability and retention effect allows for passive targeting of solid tumours by nanoparticles carrying anticancer drugs. However, active targeting by incorporation of various ligands onto nanoparticles can provide for a more selective and enhanced chemotherapeutic effect and complement the deficiencies of the passive targeting approach. Here we report on the design of the carboxyl-terminated PEGylated gold nanoparticles (AuNPs), their functionalization with anti-CD133 monoclonal antibody (mAb) via a crosslinking reaction, and subsequent 5-fluorouracil (5-FU) drug loading. The synthesized products in the form of stable colloids were characterised using a range of physicochemical techniques, including X-ray diffraction (XRD), UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Conjugation of anti-CD133 mAb onto PEGylated AuNPs was confirmed with the use of UV-Vis, BCA protein assay and fluorescence microscopy. HCT116 colorectal cancer cells abundantly expressed CD133: 92.4 ± 1.3%, as measured by flow cytometry. Whereas PEGylated AuNPs not conjugated with anti-CD133 mAb accumulated mainly at the cellular membrane, nanoparticles conjugated with anti-CD133 mAb were contained within the nuclear region of the cells. Anti-CD133 mAb conjugation facilitated the specific intracellular uptake due to specific antigen-antibody binding interaction. In vitro cytotoxicity studies on HCT116 cells showed that PEGylated AuNPs and PEGylated AuNPs-CD133 did not elicit any toxicity at any of the tested concentrations. Meanwhile, 5-FU-PEGylated AuNPs-CD133 significantly reduced the cell viability relative to the treatment with 5-FU-PEGylated AuNPs without anti-CD133 mAb conjugates (p < 0.0001). This study shows that the conjugation of nanocarriers with the anti-CD133 antibody improves the specific targeting of 5-FU against colorectal cancer cells. These results demonstrate that simultaneous functionalisation of PEGylated AuNPs with antibodies and chemotherapeutic drugs is a viable strategy to combat cancer through targeted drug delivery.

COVID-19 infection and nanomedicine applications for development of vaccines and therapeutics: An overview and future perspectives based on polymersomes

The severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), which emerged in December 2019 and caused the coronavirus disease 2019 (COVID-19) pandemic, took the world by surprise with an unprecedented public health emergency. Since this pandemic began, extraordinary efforts have been made by scientists to understand the pathogenesis of COVID-19, and to fight the infection by providing various preventive, diagnostic and treatment opportunities based on either novel hypotheses or past experiences. Despite all the achievements, COVID-19 continues to be an accelerating health threat with no specifically approved vaccine or therapy. This review highlights the recent advances in COVID-19 infection, with a particular emphasis on nanomedicine applications that can help in the development of effective vaccines or therapeutics against COVID-19. A novel future perspective has been proposed in this review based on utilizing polymersome nano-objects for effectively suppressing the cytokine storm, which may reduce the severity of COVID-19 infection.

Nanofibrous ε-polycaprolactone scaffolds containing Ag-doped magnetite nanoparticles: Physicochemical characterization and biological testing for wound dressing applications in vitro and in vivo

Skin wounds can lead to numerous complications with dangerous health consequences. In this work, magnetite nanoparticles were doped with different concentrations of antimicrobial silver (Ag) ions and incorporated into the electrospun nanofibrous ε-polycaprolactone (PCL) scaffolds. Nanoparticles and scaffolds with various Ag contents were characterized using a range of physicochemical techniques. Ag entered magnetite as cations and preferentially positioned at tetrahedral sites, introducing lattice distortions and topographic irregularities. Amorphization of the structure due to accommodation of Ag expanded the lattice in the bulk and contracted it on the surface, where broadened distribution of Fe–O coordinations was detected. Promoting spin canting and diminishing the double exchange interaction through altered distribution of ferric and ferrous ions, Ag softened the magnetism of magnetite. By making the nanoparticle structure more defective, Ag modified the interface with the polymer and promoted the protrusion of the nanoparticles from the surface of the polymeric nanofibers, thus increasing their roughness and hydrophilicity, with positive repercussions on cell adhesion and growth. Both the viability of human melanocytes and the antibacterial activity against E. coli and S. aureus increased with the concentration of Ag in the magnetite phase of the scaffolds. Skin wound healing rate in rats also increased in direct proportion with the concentration of Ag in the magnetite phase, and no abnormalities in the dermal and epidermal tissues were visible on day 10 in the treatment group. These results imply an excellent potential of these composite nanofibrous scaffolds for use as wound dressings and in other reconstructive skin therapies.

•

Electrospun nanofibrous polymeric wound dressings interspersed with magnetite nanoparticles doped with Ag ions were fabricated.

•

Detailed physicochemical characterization is provided with aid of diffractometric, spectroscopic and microscopic techniques.

•

Both the viability of melanocytes and the antibacterial activity increased with the addition of Ag ions.

•

Skin wound healing rate in rats increased to 51 and 92 % on day 10 for dressings without and with Ag, respectively, relative to control.

•

Animals treated with Ag-doped dressings displayed no atrophy of sebaceous glands and necrosis of hair follicles of control animals.

Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics

Amorphous calcium phosphate (ACP) is a material of high interest for dentistry, orthopedics, and other biomedical sectors. Being intrinsically metastable, the process of transformation of ACP into a crystalline phase upon heating is of high relevance for the development of innovative bioceramics. Here we have first studied the thermal behavior of a citrate-stabilized ACP (Cit-ACP) also doped with fluoride ions (Cit-FACP) prepared at three different nominal Cit/Ca ratios (i.e. 4, 2, 1) by differential thermal analysis. Next, the physico-chemical features of the crystalline products as well as the in vitro cell response to the materials were investigated. A citrate and fluoride free ACP sample was also tested as the blank. We have found that the activation energy of crystallization of Cit-(F)ACP samples is lower in comparison to the blank ACP and this is influenced by the nominal Cit/Ca molar ratio. Interestingly, we have discovered that the thermal treatment of Cit-(F)ACP at 800 °C yields hydroxyapatite (HA) or fluorapatite (FHA) as the main products differently from blank ACP that, like most of the ACPs reported in the literature, yields β-tricalcium phosphate. This was attributed to the Ca/P ratio of Cit-(F)ACP, which is similar to HA. A study of the crystalline products has revealed that all the (F)HA samples were non-cytotoxic, and retained carbonate ions in the crystal structure despite the heat treatment that should have induced decarbonation. The morphology of the products is influenced by the nominal Cit/Ca ratio and the presence of fluoride, ranging from spherical nanoparticles to micrometric hexagonal rods. Overall, our results prove that the thermal crystallization of Cit-(F)ACP is markedly different from classic ACP based materials and the thermal treatment of Cit-(F)ACP represents an attractive route for producing pure bioactive HA ceramics.

Empirical and theoretical insights into the structural effects of selenite doping in hydroxyapatite and the ensuing inhibition of osteoclasts

The use of ions as therapeutic agents has the potential to minimize the use of small-molecule drugs and biologics for the same purpose, thus providing a potentially more economic and less adverse means of treating, ameliorating or preventing a number of diseases. Hydroxyapatite (HAp) is a solid compound capable of accommodating foreign ions with a broad range of sizes and charges and its properties can dramatically change with the incorporation of these ionic additives. While most ionic substitutes in HAp have been monatomic cations, their lesser atomic weight, higher diffusivity, chaotropy and a lesser residence time on surfaces theoretically makes them prone to exert a lesser influence on the material/cell interaction than the more kosmotropic oxyanions. Selenite ion as an anionic substitution in HAp was explored in this study for its ability to affect the short-range and the long-range crystalline symmetry and solubility as well as for its ability to affect the osteoclast activity. We combined microstructural, crystallographic and spectroscopic analyses with quantum mechanical calculations to understand the structural effects of doping HAp with selenite. Integration of selenite ions into the crystal structure of HAp elongated the crystals along the c-axis, but isotropically lowered the crystallinity. It also increased the roughness of the material in direct proportion with the content of the selenite dopant, thus having a potentially positive effect on cell adhesion and integration with the host tissue. Selenite in total acted as a crystal structure breaker, but was also able to bring about symmetry at the local and global scales within specific concentration windows, indicating a variety of often mutually antagonistic crystallographic effects that it can induce in a concentration-dependent manner. Experimental determination of the lattice strain coupled with ab initio calculations on three different forms of carbonated HAp (A-type, B-type, AB-type) demonstrated that selenite ions initially substitute carbonates in the crystal structure of carbonated HAp, before substituting phosphates at higher concentrations. The most energetically favored selenite-doped HAp is of AB-type, followed by the B-type and only then by the A-type. This order of stability was entailed by the variation in the geometry and orientation of both the selenite ion and its neighboring phosphates and/or carbonates. The incorporation of selenite in different types of carbonated HAp also caused variations of different thermodynamic parameters, including entropy, enthalpy, heat capacity, and the Gibbs free energy. Solubility of HAp accommodating 1.2 wt% of selenite was 2.5 times higher than that of undoped HAp and the ensuing release of the selenite ion was directly responsible for inhibiting RAW264.7 osteoclasts. Dose-response curves demonstrated that the inhibition of osteoclasts was directly proportional to the concentration of selenite-doped HAp and to the selenite content in it. Meanwhile, selenite-doped HAp had a significantly less adverse effect on osteoblastic K7M2 and MC3T3-E1 cells than on RAW264.7 osteoclasts. The therapeutically promising osteoblast vs. osteoclast selectivity of inhibition was absent when the cells were challenged with undoped HAp, indicating that it is caused by selenite ions in HAp rather than by HAp alone. It is concluded that like three oxygens building the selenite pyramid, the coupling of (1) experimental materials science, (2) quantum mechanical modeling and (3) biological assaying is a triad from which a deeper understanding of ion-doped HAp and other biomaterials can emanate.

Protecting healthcare workers during COVID-19 pandemic with nanotechnology: A protocol for a new device from Egypt

The outbreak of the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is thought to have occurred first in Wuhan, China in December 2019, before spreading to over 120 countries in the months that followed. It was declared a “public health emergency of international concern” by the World Health Organization on January 31, 2020 and recognized as a pandemic on March 11, 2020. The primary route of SARS-CoV-2 transmission from human to human is through inhalation of respiratory droplets. Devising protective technologies for stopping the spread of the droplets of aerosol containing the viral particles is a vital requirement to curb the ongoing outbreak. However, the current generations of protective respirator masks in use are noted for their imperfect design and there is a need to develop their more advanced analogues, with higher blockage efficiency and the ability to deactivate the trapped bacteria and viruses. It is likely that one such design will be inspired by nanotechnologies. Here we describe a new design from Egypt, utilizing a reusable, recyclable, customizable, antimicrobial and antiviral respirator facial mask feasible for mass production. The novel design is based on the filtration system composed of a nanofibrous matrix of polylactic acid and cellulose acetate containing copper oxide nanoparticles and graphene oxide nanosheets and produced using the electrospinning technique. Simultaneously, the flat pattern fabricated from a thermoplastic composite material is used to provide a solid fit with the facial anatomy. This design illustrates an effort made in a developing setting to provide innovative solutions for combating the SARS-CoV-2 pandemic of potentially global significance.

Why have nanotechnologies been underutilized in the global uprising against the coronavirus pandemic?

Prior research on nanotechnologies in diagnostics, prevention and treatment of coronavirus infections is reviewed. Gold nanoparticles and semiconductor quantum dots in colorimetric and immunochromatographic assays, silica nanoparticles in the polymerase chain reaction and spike protein nanospheres as antigen carriers and adjuvants in vaccine formulations present notable examples in diagnostics and prevention, while uses of nanoparticles in coronavirus infection treatments have been merely sporadic. The current absence of antiviral therapeutics that specifically target human coronaviruses, including SARS-CoV-2, might be largely due to the underuse of nanotechnologies. Elucidating the interface between nanoparticles and coronaviruses is timely, but presents the only route to the rational design of precisely targeted therapeutics for coronavirus infections. Such a fundamental approach is also a viable prophylaxis against future pandemics of this type.

Hydroxyapatite as a biomaterial - a gift that keeps on giving

The synthetic analogue to biogenic apatite, hydroxyapatite (HA) has a number of physicochemical properties that make it an attractive candidate for diagnosis, treatment of disease and augmentation of biological tissues. Here we describe some of the recent studies on HA, which may provide bases for a number of new medical applications. The content of this review is divided to different medical application modes utilizing HA, including tissue engineering, medical implants, controlled drug delivery, gene therapies, cancer therapies and bioimaging. A number of advantages of HA over other biomaterials emerge from this discourse, including (i) biocompatibility, (ii) bioactivity, (iii) relatively simple synthesis protocols for the fabrication of nanoparticles with specific sizes and shapes, (iv) smart response to environmental stimuli, (v) facile functionalization and surface modification through noncovalent interactions, and (vi) the capacity for being simultaneously loaded with a wide range of therapeutic agents and switched to bioimaging modalities for uses in theranostics. A special section is dedicated to analysis of the safety of particulate HA as a component of parenterally administrable medications. It is concluded that despite the fact that many benefits come with the usage of HA, its deficiencies and potential side effects must be addressed before the translation to the clinical domain is pursued. Although HA has been known in the biomaterials world as the exemplar of safety, this safety proves to be the function of size, morphology, surface ligands and other structural and compositional parameters defining the particles. For this reason, each HA, especially when it comes in a novel structural form, must be treated anew from the safety research angle before being allowed to enter the clinical stage.

Factors defining the stability of poly(lactide-co-glycolide) spheres for the sustained release of a cysteine protease inhibitor

Colloidal stability and the regularity of the release kinetics benefit from the high circularity and the narrow size dispersion of polymeric particles as drug delivery carriers. A method for obtaining such particles composed of poly(lactide-co-glycolide) (PLGA), averaging at 1.0 ± 0.3 µm in size, is reported here, along with the analysis of the effects of different synthesis parameters on their morphological characteristics. As in agreement with the classical nucleation theory, the particle size and the degree of cohesion were inversely proportional to supersaturation. Consequently, the optimal conditions for the precipitation of small and narrowly dispersed particles involved an abrupt elevation of supersaturation. Owing to the high colloidal stability of the particles, centrifugation exhibited a counterintuitive effect on them, refining their morphological features and promoting their individuation. Polyvinyl alcohol (PVA) was used as a steric repulsion additive and its effect on the stability of PLGA spheres was concentration-dependent, with the particles aggregating, partially coalescing and losing their distinct features both with no PVA in the system and at PVA concentrations higher than the optimal. At its narrowest, the particle size distribution was bimodal, exhibiting the average circularity of 0.997 ± 0.003 and the average roundness of 0.913 ± 0.054. PLGA spheres were loaded with an inhibitor of EhCP4, a cysteine protease from E. histolytica, a parasite causing amoebic dysentery in the tropical and developing world. The burst release of the drug at early time points was followed by a zero-order release period, yielding a biphasic profile that can be of benefit in the delivery of anti-infective agents. The release profile fitted poorly with the Hixson-Crowell kinetic model and excellently with the Higuchi and the Korsmeyer-Peppas ones, indicating that the release is conditioned by diffusion rather than by the degradation of the polymer. The release and the erosion proceeded independently from one another, suggesting that the pore formation, water penetration and swelling are the primary driving forces for the release of the drug.

Physical, electrochemical and biological evaluations of spin-coated ε-polycaprolactone thin films containing alumina/graphene/carbonated hydroxyapatite/titania for tissue engineering applications

Composite structures are at the frontier of materials science and engineering and polymeric/ceramic composites present one of their most prospective subsets. Prior studies have shown both improvements and deteriorations of properties of polymers upon the addition of ceramic phases to them, but not many studies have dealt with the direct comparison of chemically distinct inorganic additives. The goal of this study was to compare the properties of ε-polycaprolactone (PCL) thin films supplemented with alumina, graphene, carbonated hydroxyapatite or titania particles, individually, in identical amounts (12 wt%). The composite films were analyzed for their phase composition, grain size, morphology, surface roughness, porosity, cell response, mechanical properties and electrochemical performance. Each additive imparted one or more physical or biological properties onto PCL better than others. Thus, alumina increased the microhardness of the films better than any other additive, with the resulting values exceeding 10 MPa. It also led to the formation of a composite with the least porosity and the greatest stability to degradation in simulated body fluid based on open circuit potential (OCP) measurements and electrochemical impedance spectroscopy (EIS). Titania made the surface of PCL roughest, which in combination with its high porosity explained why it was the most conducive to the growth of human fibroblasts, alongside being most prone to degradation in wet, corrosive environments and having the highest Poisson's ratio. Graphene, in contrast, made the surface of PCL smoothest and the bulk structure most porous, but also most conductive, with the OCP of -37 mV. The OCP of PCL supplemented with carbonated hydroxyapatite had the highest OCP of -134 mV and also the highest mechanical moduli, including the longitudinal (781 MPa), the shear (106 MPa), the bulk (639 MPa), and the elastic (300 MPa). The only benefit of the deposition of multilayered PCL films supplemented with all four inorganic additives was to enable a relatively high resistance to degradation. This study demonstrates that the properties of thin PCL films could be effectively optimized through the simple choice of appropriate inorganic additives dispersed in them. There is no single additive that proves ideal for improving all the properties of interest in PCL thin films, but their choice should be adjusted to the actual application. One such method of compositional optimization could prove crucial in the effort to develop biocomposites for superior performance in tissue engineering applications.

Pulsed laser deposition temperature effects on strontium-substituted hydroxyapatite thin films for biomedical implants

Substituting small molecule drugs with abundant and easily affordable ions may have positive effects on the way countless disease treatments are approached. The interest in strontium cation in bone therapies soared in the wake of the success of strontium ranelate in the treatment of osteoporosis. A new method for producing thin strontium-containing hydroxyapatite (Sr-HA, Ca₉Sr(PO₄)₆(OH)₂) films as coatings that render bioinert titanium implant bioactive is reported here. The method is based on the combination of a mechanochemical synthesis of Sr-HA targets and their deposition in form of thin films on top of titanium with the use of laser ablation at low pressure. The films were 1-2 μm in thickness and their formation was studied at different temperatures, including 25, 300, and 500 °C. Highly crystalline Sr-HA target transformed during pulsed laser deposition to a fully amorphous film, whose degree of long-range order recovered with temperature. Particle edges became somewhat sharper and surface roughness moderately increased with temperature, but the (Ca+Sr)/P atomic ratio, which increased 1.5 times during the film formation, remained approximately constant at different temperatures. Despite the mostly amorphous structure of the coatings, their affinity for capturing atmospheric carbon dioxide and accommodating it as carbonate ions that replace both phosphates and hydroxyls of HA was confirmed in an X-ray photoelectron spectroscopic analysis. As the film deposition temperature increased, the lattice voids got reduced in concentration and the structure gradually "closed," becoming more compact and entailing a linear increase in microhardness with temperature, by 0.03 GPa/°C for the entire 25-500 °C range. Biocompatibility and bioactivity of Sr-HA thin films deposited on titanium were confirmed in an interaction with dental pulp stem cells, suggesting that these coatings, regardless of the processing temperature, may be viable candidates for the surface components of metallic bone implants.

Visualizing Different Crystalline States during the Infrared Imaging of Calcium Phosphates

Methods utilizing relatively simple mathematical operations during physical analyses to enable the visualization of otherwise invisible correlations and effects are of particular appeal to researchers and students in pedagogical settings. At the same time, discerning the amorphous phase from its crystalline counterpart in materials is challenging with the use of vibrational spectroscopy and is nowhere as straightforward as in phase composition analytical methods such as X-ray diffraction. A method is demonstrated for the use of first- and second-order differentiation of Fourier transform infrared spectra of calcium phosphates to distinguish their amorphous states from the crystalline ones based on the exact line positioning rather than on comparatively vaguer band broadening and splitting effects. The study utilizes a kinetic approach, focusing on the comparison of spectral features of amorphous precursors annealed in air at different temperatures and aged for different periods of time in an aqueous solution until transforming to one or a mixture of crystalline phases, including hydroxyapatite and α- and β-tricalcium phosphate. One of the findings challenges the concept of the nucleation lag time preceding the crystallization from amorphous precursors as a "dead" period and derives a finite degree of constructive changes occurring at the atomic scale in its course. The differential method for highlighting spectral differences depending on the sample crystallinity allows for monitoring in situ the process of conversion of the amorphous calcium phosphate phase to its crystalline analogue(s). One such method can be of practical significance for synthetic solid state chemists testing for the chemical stability and/or concentration of the reactive amorphous phase in these materials, but also for biologists measuring the maturity of bone and medical researchers evaluating its phase composition and, thus, the state of metabolic and mechanical stability.