1
|
Ren K, Li M, Wang Q, Liu B, Sun C, Yuan B, Lai C, Jiao L, Wang C. Thioacetamide Additive Homogenizing Zn Deposition Revealed by In Situ Digital Holography for Advanced Zn Ion Batteries. Nanomicro Lett 2024; 16:117. [PMID: 38358566 PMCID: PMC10869330 DOI: 10.1007/s40820-023-01310-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2023] [Accepted: 11/30/2023] [Indexed: 02/16/2024]
Abstract
Zinc ion batteries are considered as potential energy storage devices due to their advantages of low-cost, high-safety, and high theoretical capacity. However, dendrite growth and chemical corrosion occurring on Zn anode limit their commercialization. These problems can be tackled through the optimization of the electrolyte. However, the screening of electrolyte additives using normal electrochemical methods is time-consuming and labor-intensive. Herein, a fast and simple method based on the digital holography is developed. It can realize the in situ monitoring of electrode/electrolyte interface and provide direct information concerning ion concentration evolution of the diffusion layer. It is effective and time-saving in estimating the homogeneity of the deposition layer and predicting the tendency of dendrite growth, thus able to value the applicability of electrolyte additives. The feasibility of this method is further validated by the forecast and evaluation of thioacetamide additive. Based on systematic characterization, it is proved that the introduction of thioacetamide can not only regulate the interficial ion flux to induce dendrite-free Zn deposition, but also construct adsorption molecule layers to inhibit side reactions of Zn anode. Being easy to operate, capable of in situ observation, and able to endure harsh conditions, digital holography method will be a promising approach for the interfacial investigation of other battery systems.
Collapse
Affiliation(s)
- Kaixin Ren
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China
| | - Min Li
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China
| | - Qinghong Wang
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China.
| | - Baohua Liu
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China
| | - Chuang Sun
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China
| | - Boyu Yuan
- Jiangsu Key Laboratory of Advanced Laser Materials and Devices, School of, Physics and Electronic Engineering, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China.
| | - Chao Lai
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China
| | - Lifang Jiao
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, 300071, Tianjin, People's Republic of China
| | - Chao Wang
- School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou, 221116, Jiangsu, People's Republic of China.
| |
Collapse
|
2
|
Petkidis A, Andriasyan V, Greber UF. Label-free microscopy for virus infections. Microscopy (Oxf) 2023:7133758. [PMID: 37079744 DOI: 10.1093/jmicro/dfad024] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 04/13/2023] [Accepted: 04/18/2023] [Indexed: 04/22/2023] Open
Abstract
Microscopy has been essential to elucidate micro- and nano-scale processes in space and time, and has provided insight into cell and organismic function. It is widely employed in cell biology, microbiology, physiology, clinical sciences and virology. While label-dependent microscopy, such as fluorescence microscopy, provides molecular specificity, it has remained difficult to multiplex in live samples. In contrast, label-free microscopy reports on overall features of the specimen at minimal perturbation. Here, we discuss modalities of label-free imaging at the molecular, cellular and tissue levels, including transmitted light microscopy, quantitative phase imaging, cryogenic electron microscopy or tomography, and atomic force microscopy. We highlight how label-free microscopy is used to probe the structural organization and mechanical properties of viruses, including virus particles and infected cells across a wide range of spatial scales. We discuss the working principles of imaging procedures and analyses, and showcase how they open new avenues in virology. Finally, we discuss orthogonal approaches that enhance and complement label-free microscopy techniques. Mini Abstract Label-free imaging gives unprecedented insight into viruses at macroscopic, molecular and atomic levels. We present the major label-free imaging techniques and discuss how they are used for virus particles and infected cells. The power of label-free microscopy promises to enhance discovery of unknown aspects of infectious and therapeutic agents.
Collapse
Affiliation(s)
- Anthony Petkidis
- Department of Molecular Life Sciences, University of Zürich, Winterthurerstrasse 190, 8057 Zürich, Switzerland
| | - Vardan Andriasyan
- Department of Molecular Life Sciences, University of Zürich, Winterthurerstrasse 190, 8057 Zürich, Switzerland
| | - Urs F Greber
- Department of Molecular Life Sciences, University of Zürich, Winterthurerstrasse 190, 8057 Zürich, Switzerland
| |
Collapse
|
3
|
Kim Y, Kim J, Seo E, Lee SJ. AI-based analysis of 3D position and orientation of red blood cells using a digital in-line holographic microscopy. Biosens Bioelectron 2023; 229:115232. [PMID: 36963327 DOI: 10.1016/j.bios.2023.115232] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2022] [Revised: 02/23/2023] [Accepted: 03/13/2023] [Indexed: 03/17/2023]
Abstract
The morphological and mechanical characteristics of red blood cells (RBCs) largely vary depending on the occurrence of hematologic disorders. Variations in the rheological properties of RBCs affect the dynamic motions of RBCs, especially their rotational behavior. However, conventional techniques for measuring the orientation of biconcave-shaped RBCs still have some technical limitations, including complicated optical setups, complex post data processing, and low throughput. In this study, we propose a novel image-based technique for measuring 3D position and orientation of normal RBCs using digital in-line holographic microscopy (DIHM) and artificial intelligence (AI). Formaldehyde-fixed RBCs are immobilized in coagulated polydimethylsiloxane (PDMS). Holographic images of RBCs positioned at various out-of-plane angles are acquired by precisely manipulating the PDMS-trapped RBC sample attached to a 4-axis optical stage. With the aid of deep learning algorithms for data augmentation and regression analysis, the out-of-plane angle of RBCs is directly predicted from the captured holographic images. The 3D position and in-plane angle of RBCs are acquired by employing numerical reconstruction and ellipse detection methods. Combining these digital image processing techniques, the 3D positional and orientational information of each RBC recorded in a single holographic image is measured within 23.5 and 3.07 s, respectively. The proposed AI-based DIHM technique that can extract the 3D position, orientation, and morphology of individual RBCs would be utilized to analyze the dynamic translational and rotational motions of abnormal RBCs with hematologic disorders in shear flows through further research.
Collapse
Affiliation(s)
- Youngdo Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
| | - Jihwan Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
| | - Eunseok Seo
- Department of Mechanical Engineering, Sogang University, Seoul, 04107, Republic of Korea
| | - Sang Joon Lee
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea.
| |
Collapse
|
4
|
Marzi A, Eder KM, Barroso Á, Wågbø AM, Mørch Ý, Hatletveit AR, Visnes T, Schmid RB, Klinkenberg G, Kemper B, Schnekenburger J. Interlaboratory evaluation of a digital holographic microscopy-based assay for label-free in vitro cytotoxicity testing of polymeric nanocarriers. Drug Deliv Transl Res 2022. [PMID: 35799027 DOI: 10.1007/s13346-022-01207-5] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 06/25/2022] [Indexed: 01/19/2023]
Abstract
State-of-the-art in vitro test systems for nanomaterial toxicity assessment are based on dyes and several staining steps which can be affected by nanomaterial interference. Digital holographic microscopy (DHM), an interferometry-based variant of quantitative phase imaging (QPI), facilitates reliable proliferation quantification of native cell populations and the extraction of morphological features in a fast and label- and interference-free manner by biophysical parameters. DHM therefore has been identified as versatile tool for cytotoxicity testing in biomedical nanotechnology. In a comparative study performed at two collaborating laboratories, we investigated the interlaboratory variability and performance of DHM in nanomaterial toxicity testing, utilizing complementary standard operating procedures (SOPs). Two identical custom-built off-axis DHM systems, developed for usage in biomedical laboratories, equipped with stage-top incubation chambers were applied at different locations in Europe. Temporal dry mass development, 12-h dry mass increments and morphology changes of A549 human lung epithelial cell populations upon incubation with two variants of poly(alkyl cyanoacrylate) (PACA) nanoparticles were observed in comparison to digitonin and cell culture medium controls. Digitonin as cytotoxicity control, as well as empty and cabazitaxel-loaded PACA nanocarriers, similarly impacted 12-h dry mass development and increments as well as morphology of A549 cells at both participating laboratories. The obtained DHM data reflected the cytotoxic potential of the tested nanomaterials and are in agreement with corresponding literature on biophysical and chemical assays. Our results confirm DHM as label-free cytotoxicity assay for polymeric nanocarriers as well as the repeatability and reproducibility of the technology. In summary, the evaluated DHM assay could be efficiently implemented at different locations and facilitates interlaboratory in vitro toxicity testing of nanoparticles with prospects for application in regulatory science.
Collapse
|
5
|
Zhikhoreva AA, Belashov AV, Danilova AB, Avdonkina NA, Baldueva IA, Gelfond ML, Nekhaeva TL, Semenova IV, Vasyutinskii OS. Significant difference in response of malignant tumor cells of individual patients to photodynamic treatment as revealed by digital holographic microscopy. J Photochem Photobiol B 2021; 221:112235. [PMID: 34126589 DOI: 10.1016/j.jphotobiol.2021.112235] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/21/2020] [Revised: 04/21/2021] [Accepted: 05/28/2021] [Indexed: 01/17/2023]
Abstract
The investigation of in-vitro response of cell cultures derived from tumor material of individual patients with similar tumor localizations to photodynamic treatment is presented. Tumor types included in the research were renal cell carcinoma, melanoma and alveolar, synovial, lypo- and osteo- sarcomas. Long-term observations of treatment-induced morphological changes in cells were performed by means of digital holographic microscopy. A substantial variance in response of cells of individual patients with similar tumor types and localizations to photodynamic treatment with the same dose has been observed. These peculiarities are indicative of the demand to personalized protocols of photodynamic treatment. The elevated resistance of cells of some patients to treatment at high doses highlights potential limitations of photodynamic therapy for some patients. Digital holographic microscopy is shown to be an informative label-free noninvasive tool allowing for long-term monitoring of cell samples in vitro and providing quantitative information on necrosis rate and loss of cellular dry mass. The developed methodology can be generalized for analysis of cellular response to various therapies.
Collapse
|
6
|
Kim J, Go T, Lee SJ. Accurate real-time monitoring of high particulate matter concentration based on holographic speckles and deep learning. J Hazard Mater 2021; 409:124637. [PMID: 33309383 DOI: 10.1016/j.jhazmat.2020.124637] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Revised: 10/26/2020] [Accepted: 11/17/2020] [Indexed: 06/12/2023]
Abstract
Accurate real-time monitoring of particulate matter (PM) has emerged as a global issue due to the hazardous effects of PM on public health and industry. However, conventional PM monitoring techniques are usually cumbersome and require expensive equipments. In this study, Holo-SpeckleNet is proposed as a fast and accurate PM concentration measurement technique with high throughput using a deep learning based holographic speckle pattern analysis. Speckle pattern datasets of PMs for a wide range of PM concentrations were acquired by using a digital in-line holography microscopy system. Deep autoencoder and regression algorithms were trained with the captured speckle pattern datasets to directly measure PM concentration from speckle pattern images without any air intake device and time-consuming post image processing. The proposed technique was applied to predict various PM concentrations using the test datasets, optimize hyperparameters, and compare its performance with a convolutional neural network (CNN) algorithm. As a result, high PM concentration values can be measured over air quality index of 150, above which human exposure is unhealthy. In addition, the proposed technique exhibits higher measurement accuracy and less overfitting than the CNN with a relative error of 7.46 ± 3.92%. It can be applied to design a compact air quality monitoring device for highly accurate and real-time measurement of PM concentrations under hazardous environment, such as factories or construction sites.
Collapse
Affiliation(s)
- Jihwan Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang 37673, South Korea
| | - Taesik Go
- Division of Biomedical Engineering, College of Engineering, Jeonbuk National University, 567 Baekje-daero, Deokjin-gu, Jeonju-si, Jeollabuk-do 54896, South Korea
| | - Sang Joon Lee
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang 37673, South Korea.
| |
Collapse
|
7
|
Dai S, Yu T, Zhang J, Lu H, Dou J, Zhang M, Dong C, Di J, Zhao J. Real-time and wide-field mapping of cell-substrate adhesion gap and its evolution via surface plasmon resonance holographic microscopy. Biosens Bioelectron 2021; 174:112826. [PMID: 33262060 DOI: 10.1016/j.bios.2020.112826] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2020] [Revised: 10/17/2020] [Accepted: 11/14/2020] [Indexed: 12/11/2022]
Abstract
As one of the most common biological phenomena, cell adhesion plays a vital role in the cellular activities such as the growth and apoptosis, attracting tremendous research interests over the past decades. Taking the cell evolution under drug injection as an example, the dynamics of cell-substrate adhesion gap can provide valuable information in the fundamental research of cell contacts. A robust technique of monitoring the cell adhesion gap and its evolution in real time is highly desired. Herein, we develop a surface plasmon resonance holographic microscopy to achieve the novel functionality of real-time and wide-field mapping of the cell-substrate adhesion gap and its evolution in situ. The cell adhesion gap images of mouse osteoblast cells and human breast cancer cells have been effectively extracted in a dynamic and label-free manner. The proposed technique opens up a new avenue of revealing the cell-substrate interaction mechanism and renders the wide applications in the biosensing area.
Collapse
|
8
|
León-Quinto T, Fimia A, Madrigal R, Serna A. Morphological response of the red palm weevil, Rhynchophorus ferrugineus, to a transient low temperature analyzed by computer tomography and holographic microscopy. J Therm Biol 2020; 94:102748. [PMID: 33292989 DOI: 10.1016/j.jtherbio.2020.102748] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2020] [Revised: 09/03/2020] [Accepted: 10/05/2020] [Indexed: 11/21/2022]
Abstract
The red palm weevil (RPW), Rhynchophorus ferrugineus, is one of the worst palm pests worldwide. Our study aims to assess its internal and external morphological response to a sudden but transient decrease in the environmental temperature. Wild pre-pupae were subjected for 7 days to either low (5.0 ± 0.5 °C) or ambient temperature (23 ± 1 °C). Such conditions mimic a thermal anomaly happening in the larval stage most exposed to environmental factors. We quantified the changes undergone at: 1) the internal morphology, by X-Ray Computer Tomography (CT); 2) the 3-D integument' architecture, by Digital Holographic Microscopy (DHM); and 3) the glucose in hemolymph as a potential endogenous cryoprotectant. From X-ray CT we found that both pre-pupae subjected to cold and those remaining at ambient temperature follow a development where their fat body content decreases while a thick and dense cuticle is formed. There was no difference between both groups in the rate of change of fat body/dense tissues. Nevertheless, the cold group presents a slight developmental delay at the level of hemolymph content. Through DHM we again obtained that pre-pupae subjected to cold have not experienced a stop in their development. However, a more obvious developmental delay is now observed in this group at the level of the integumental roughness. Finally, regarding glucose, we found similar levels in control and ambient temperature larvae, while it was clearly increased in 51,7% of those subjected to cold. Our whole results provide morphological and biochemical evidence showing that the larval-pupal transition of the RPW continues almost undisturbed even during the quiescent state induced by a sudden and severe cold event. Nevertheless, a certain developmental delay is observed in both internal and external morphology. Additionally, the increased glucose level only found in the cold group suggests that glucose is part of the RPW cold tolerance strategy.
Collapse
|
9
|
Yuan S, Qi M, Peng Q, Huang G, Liu J, Xu Z, Gong X, Zhang G. Adaptive behaviors of planktonic Pseudomonas aeruginosa in response to the surface-deposited dead siblings. Colloids Surf B Biointerfaces 2020; 197:111408. [PMID: 33099147 DOI: 10.1016/j.colsurfb.2020.111408] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2020] [Revised: 09/23/2020] [Accepted: 10/08/2020] [Indexed: 11/27/2022]
Abstract
In this study, the 3D motion behaviors and the underlying adaptation mechanism of planktonic Pseudomonas aeruginosa (PAO1) in response to the deposited dead siblings nearby were explored. Utilizing a real-time 3D tracking technique, digital holographic microscopy (DHM), we demonstrate that planktonic cells near the surface covered with dead siblings have a lower density and a reduced 3D velocity compared with those upon viable ones. As a sign of chemosensory responses, bacteria swimming near the dead siblings exhibit increase in frequency of the 'flick' motion. Transcriptomic analysis by RNA-seq reveals an upregulated expression of dgcM and dgcE inhibited the movement of PAO1, accompanied by increased transcriptional levels of the virulence factor-related genes hcp1, clpV1, and vgrG1. Moreover, the decrease in l-glutamate and the increase in succinic acid in the metabolites of the dead bacteria layer promote the dispersion of planktonic bacteria. As a result, the dead siblings on a surface inhibit the bacterial accumulation and activate the adaptive defensive responses of planktonic PAO1 in the vicinity.
Collapse
Affiliation(s)
- Shuo Yuan
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Meng Qi
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Qingmei Peng
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Gui Huang
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Jun Liu
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Zhenbo Xu
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Xiangjun Gong
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates (South China University of Technology), PR China.
| | - Guangzhao Zhang
- Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| |
Collapse
|
10
|
Huang G, Li S, Jin X, Qi M, Gong X, Zhang G. Microscale topographic surfaces modulate three-dimensional migration of human spermatozoa. Colloids Surf B Biointerfaces 2020; 193:111096. [PMID: 32413705 DOI: 10.1016/j.colsurfb.2020.111096] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2020] [Revised: 04/04/2020] [Accepted: 04/24/2020] [Indexed: 11/28/2022]
Abstract
Sperm migration in the female reproductive tract is vital for reproduction. Surface topography is expected to be a vital determinant on this process. Using digital holographic microscopy (DHM), we investigated three-dimensional (3D) motion dynamics of human spermatozoa near a flat glass surface and microscale topographic surfaces with tunable roughness fabricated by a monolayer of closely packed silica colloidal particles. Generally, the rougher surfaces show negative impacts on the sperm migration through the hydrodynamic interactions modulated by surface topography, reflected as oscillating trajectories with wider swimming orientation distribution, reduced 3D velocity and less helical/hyperactivated/hyerhelical motions. Nevertheless, slight difference is observed for the sperm motion near the flat glass surface and the surface with a feature dimension similar to the sperm tail. Our study provides new insights in understanding and manipulating sperm motions.
Collapse
Affiliation(s)
- Gui Huang
- Faculty of Material Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Sun Li
- Center for Reproductive Medicine, The Third Affiliated Hospital, Sun Yat-Sen University, 600, Tianhe Road, Guangzhou, PR China
| | - Xueqing Jin
- Faculty of Material Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Meng Qi
- Faculty of Material Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| | - Xiangjun Gong
- Faculty of Material Science and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates(South China University of Technology), PR China.
| | - Guangzhao Zhang
- Faculty of Material Science and Engineering, South China University of Technology, Guangzhou 510640, PR China
| |
Collapse
|
11
|
Kitamura Y, Isobe K, Kawabata H, Tsujino T, Watanabe T, Nakamura M, Toyoda T, Okudera H, Okuda K, Nakata K, Kawase T. Quantitative evaluation of morphological changes in activated platelets in vitro using digital holographic microscopy. Micron 2018; 113:1-9. [PMID: 29936304 DOI: 10.1016/j.micron.2018.06.011] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2018] [Revised: 05/05/2018] [Accepted: 06/15/2018] [Indexed: 12/13/2022]
Abstract
Platelet activation and aggregation have been conventionally evaluated using an aggregometer. However, this method is suitable for short-term but not long-term quantitative evaluation of platelet aggregation, morphological changes, and/or adhesion to specific materials. The recently developed digital holographic microscopy (DHM) has enabled the quantitative evaluation of cell size and morphology without labeling or destruction. Thus, we aim to validate its applicability in quantitatively evaluating changes in cell morphology, especially in the aggregation and spreading of activated platelets, thus modifying typical image analysis procedures to suit aggregated platelets. Freshly prepared platelet-rich plasma was washed with phosphate-buffered saline and treated with 0.1% CaCl2. Platelets were then fixed and subjected to DHM, scanning electron microscopy (SEM), atomic force microscopy, optical microscopy, and flow cytometry (FCM). Tightly aggregated platelets were identified as single cells. Data obtained from time-course experiments were plotted two-dimensionally according to the average optical thickness versus attachment area and divided into four regions. The majority of the control platelets, which supposedly contained small and round platelets, were distributed in the lower left region. As activation time increased, however, this population dispersed toward the upper right region. The distribution shift demonstrated by DHM was essentially consistent with data obtained from SEM and FCM. Therefore, DHM was validated as a promising device for testing platelet function given that it allows for the quantitative evaluation of activation-dependent morphological changes in platelets. DHM technology will be applicable to the quality assurance of platelet concentrates, as well as diagnosis and drug discovery related to platelet functions.
Collapse
Affiliation(s)
| | | | | | | | | | | | | | | | - Kazuhiro Okuda
- Division of Periodontology, Institute of Medicine and Dentistry, Niigata University, Niigata, Japan
| | - Koh Nakata
- Bioscience Medical Research Center, Niigata University Medical and Dental Hospital, Niigata, Japan
| | - Tomoyuki Kawase
- Division of Oral Bioengineering, Institute of Medicine and Dentistry, Niigata University, Niigata, 951-8514, Japan.
| |
Collapse
|
12
|
Abstract
Digital holographic microscopy in reflection mode is used to track in situ, real-time nanoscale topography evolution of cleaved (104) calcite surfaces exposed to flowing or static deionized water. The method captures full-field holograms of the surface at frame rates of up to 12.5 s-1. Numerical reconstruction provides 3D surface topography with vertical resolution of a few nanometers and enables measurement of time-dependent local dissolution fluxes. A statistical distribution, or spectrum, of dissolution rates is generated by sampling multiple area domains on multiple crystals. The data show, as has been demonstrated by Fischer et al. (2012), that dissolution is most fully described by a rate spectrum, although the modal dissolution rate agrees well with published mean dissolution rates (e.g., 0.1 µmol m-2 s-1 to 0.3 µmol m-2 s-1). Rhombohedral etch pits and other morphological features resulting from rapid local dissolution appear at different times and are heterogeneously distributed across the surface and through the depth. This makes the distribution in rates measured on a single crystal dependent both on the sample observation field size and on time, even at nominally constant undersaturation. Statistical analysis of the inherent noise in the DHM measurements indicates that the technique is robust and that it likely can be applied to quantify and interpret rate spectra for the dissolution or growth of other minerals.
Collapse
Affiliation(s)
- Alexander S Brand
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| | - Pan Feng
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
- Jiangsu Key Laboratory of Construction Materials, School of Material Science and Engineering, Southeast University, Nanjing 211189, China
| | - Jeffrey W Bullard
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| |
Collapse
|
13
|
Abstract
Recent topography measurements of gypsum dissolution have not reported the absolute dissolution rates, but instead focus on the rates of formation and growth of etch pits. In this study, the in situ absolute retreat rates of gypsum (010) cleavage surfaces at etch pits, at cleavage steps, and at apparently defect-free portions of the surface are measured in flowing water by reflection digital holographic microscopy. Observations made on randomly sampled fields of view on seven different cleavage surfaces reveal a range of local dissolution rates, the local rate being determined by the topographical features at which material is removed. Four characteristic types of topographical activity are observed: 1) smooth regions, free of etch pits or other noticeable defects, where dissolution rates are relatively low; 2) shallow, wide etch pits bounded by faceted walls which grow gradually at rates somewhat greater than in smooth regions; 3) narrow, deep etch pits which form and grow throughout the observation period at rates that exceed those at the shallow etch pits; and 4) relatively few, submicrometer cleavage steps which move in a wave-like manner and yield local dissolution fluxes that are about five times greater than at etch pits. Molar dissolution rates at all topographical features except submicrometer steps can be aggregated into a continuous, mildly bimodal distribution with a mean of 3.0 µmolm-2 s-1 and a standard deviation of 0.7 µmolm-2 s-1.
Collapse
Affiliation(s)
- Pan Feng
- Jiangsu Key Laboratory of Construction Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| | - Alexander S. Brand
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| | - Lei Chen
- Center for Nanoscale Science and Technology, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| | - Jeffrey W. Bullard
- Materials and Structural Systems Division, Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA
| |
Collapse
|
14
|
Lai S, Centi S, Borri C, Ratto F, Cavigli L, Micheletti F, Kemper B, Ketelhut S, Kozyreva T, Gonnelli L, Rossi F, Colagrande S, Pini R. A multifunctional organosilica cross-linker for the bio-conjugation of gold nanorods. Colloids Surf B Biointerfaces 2017; 157:174-181. [PMID: 28586730 DOI: 10.1016/j.colsurfb.2017.05.068] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2016] [Revised: 05/03/2017] [Accepted: 05/26/2017] [Indexed: 12/21/2022]
Abstract
We report on the use of organosilica shells to couple gold nanorods to functional peptides and modulate their physiochemical and biological profiles. In particular, we focus on the case of cell penetrating peptides, which are used to load tumor-tropic macrophages and implement an innovative drug delivery system for photothermal and photoacoustic applications. The presence of organosilica exerts subtle effects on multiple parameters of the particles, including their size, shape, electrokinetic potential, photostability, kinetics of endocytic uptake and cytotoxicity, which are investigated by the interplay of colorimetric methods and digital holographic microscopy. As a rule of thumb, as the thickness of organosilica increases from none to ∼30nm, we find an improvement of the photophysical performances at the expense of a deterioration of the biological parameters. Therefore, detailed engineering of the particles for a certain application will require a careful trade-off between photophysical and biological specifications.
Collapse
Affiliation(s)
- Sarah Lai
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| | - Sonia Centi
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| | - Claudia Borri
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy; Department of Experimental and Clinical Biomedical Science, University of Florence, Florence, Italy
| | - Fulvio Ratto
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy.
| | - Lucia Cavigli
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| | - Filippo Micheletti
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| | - Bjӧrn Kemper
- Biomedical Technology Center, University of Muenster, Muenster, Germany
| | - Steffi Ketelhut
- Biomedical Technology Center, University of Muenster, Muenster, Germany
| | | | | | - Francesca Rossi
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| | - Stefano Colagrande
- Department of Experimental and Clinical Biomedical Science, University of Florence, Florence, Italy
| | - Roberto Pini
- Institute of Applied Physics, National Research Council of Italy, Sesto Fiorentino, Italy
| |
Collapse
|
15
|
Zeng N, Mignet N, Dumortier G, Olivier E, Seguin J, Maury M, Scherman D, Rat P, Boudy V. Poloxamer bioadhesive hydrogel for buccal drug delivery: Cytotoxicity and trans-epithelial permeability evaluations using TR146 human buccal epithelial cell line. Int J Pharm 2015; 495:1028-37. [PMID: 26403384 DOI: 10.1016/j.ijpharm.2015.09.045] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2015] [Revised: 09/18/2015] [Accepted: 09/19/2015] [Indexed: 12/11/2022]
Abstract
A salbutamol sulfate (SS)-Poloxamer bioadhesive hydrogel specially developed for buccal administration was investigated by studying interactions with TR146 human buccal epithelium cells (i.e. cellular toxicity (i) and trans-epithelial SS diffusion (ii)). The assessment of cell viability (MTT, Alamar Blue), membrane integrity (Neutral Red), and apoptosis assay (Hoechst 33342), were performed and associated to Digital Holographic Microscopy analysis. After the treatment of 2h, SS solution induced drastic cellular alterations that were prevented by hydrogels in relation with the concentrations of poloxamer and xanthan gum. The formulation containing P407 19%/P188 1%/Satiaxane 0.1% showed the best tolerance after single and multiple administrations and significantly reduced the trans-epithelial permeability from 5.00±0.29 (×10(3)) (SS solution) to 1.83±0.22 cm/h. Digital Holographic Microscopy images in good agreement with the viability data confirmed the great interest of this direct technique. In conclusion, the proposed hydrogels represent a safe and efficient buccal drug delivery platform.
Collapse
Affiliation(s)
- Ni Zeng
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France; Unither Pharmaceuticals-Unither Développement Bordeaux, ZA Tech Espace, Av. Toussaint Catros, F-33185 Le Haillan, France
| | - Nathalie Mignet
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Gilles Dumortier
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Elodie Olivier
- UMR 8638CNRS COMETE, Paris Descartes University, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Johanne Seguin
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Marc Maury
- Unither Pharmaceuticals-Unither Développement Bordeaux, ZA Tech Espace, Av. Toussaint Catros, F-33185 Le Haillan, France
| | - Daniel Scherman
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Patrice Rat
- UMR 8638CNRS COMETE, Paris Descartes University, 4, avenue de l'observatoire, F-75006 Paris, France
| | - Vincent Boudy
- CNRS UMR 8258-Inserm U1022, Paris Descartes University, Chimie-Paris Tech, 4, avenue de l'observatoire, F-75006 Paris, France; Mise au point galénique, Agence Générale des Equipements et des Produits de Santé (AGEPS), AP-HP, 7, rue du fer à moulin, F-75005 Paris, France.
| |
Collapse
|
16
|
Wu X, Gao W. A general model for resolution of digital holographic microscopy. J Microsc 2015; 260:152-62. [PMID: 26249789 DOI: 10.1111/jmi.12278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2014] [Accepted: 05/26/2015] [Indexed: 11/30/2022]
Abstract
For digital holographic microscopic imaging, the resolution in the reconstructed image is one of the most important parameters. To optimize the lateral resolution, a general model for the resolution of digital holographic microscopy (DHM) is proposed in this work, in which the effects of the sizes of each pixel, total area of the charge coupled device (CCD) and the microscopic objective lens are taken into account. Comparison between our model and others was carried out by calculating the point spread function (PSF) of DHM at different reconstruction distances and with different fill factors. It is shown that the effect of fill factors on the resolution of DHM becomes significant when the reconstruction distance is long. For high resolution DHM imaging the influence of fill factors must be taken into account when estimating the resolution of the reconstructed image. Furthermore, It is also demonstrated that the sidelobe of PSF can be cut effectively choosing appropriate values of the fill factors. Finally, the reconstructions of polyethylene microspheres have been implemented to demonstrate the theoretical analysis. These results obtained are helpful for estimation of the resolution and design of the DHM systems.
Collapse
Affiliation(s)
- Xiupin Wu
- Department of Optical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing, Jiangsu, 210094, P. R. China
| | - Wanrong Gao
- Department of Optical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing, Jiangsu, 210094, P. R. China
| |
Collapse
|
17
|
Lei H, Hu X, Zhu P, Chang X, Zeng Y, Hu C, Li H, Hu X. Nano-level position resolution for particle tracking in digital in-line holographic microscopy. J Microsc 2015; 260:100-6. [PMID: 26239892 DOI: 10.1111/jmi.12271] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2015] [Accepted: 04/30/2015] [Indexed: 11/30/2022]
Abstract
Three-dimensional particle tracking in biological systems is a quickly growing field, many techniques have been developed providing tracking characters. Digital in-line holographic microscopy is a valuable technique for particle tracking. However, the speckle noise, out-of-focus signals and twin image influenced the particle tracking. Here an adaptive noise reduction method based on bidimensional ensemble empirical mode decomposition is introduced into digital in-line holographic microscopy. It can eliminate the speckle noise and background of the hologram adaptively. Combined with the three-dimensional deconvolution approach in the reconstruction, the particle feature would be identified effectively. Tracking the fixed beads on the cover-glass with piezoelectric stage through multiple holographic images demonstrate the tracking resolution, which approaches 2 nm in axial direction and 1 nm in transverse direction. This would facilitate the development and use in the biological area such as living cells and single-molecule approaches.
Collapse
Affiliation(s)
- H Lei
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| | - X Hu
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| | - P Zhu
- Key Laboratory of Opto-Electronics Information Technology, Tianjin University, Tianjin, 300072, China
| | - X Chang
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| | - Y Zeng
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| | - C Hu
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| | - H Li
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China.,Department of Chemistry, University of British Columbia, Vancouver, BC, V6T 1Z1, Canada
| | - X Hu
- State Key Laboratory of Precision Measuring Technology & Instruments, Tianjin University, Tianjin, 300072, China
| |
Collapse
|
18
|
El-Schich Z, Mölder A, Tassidis H, Härkönen P, Falck Miniotis M, Gjörloff Wingren A. Induction of morphological changes in death-induced cancer cells monitored by holographic microscopy. J Struct Biol 2015; 189:207-12. [PMID: 25637284 DOI: 10.1016/j.jsb.2015.01.010] [Citation(s) in RCA: 28] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/07/2014] [Revised: 01/16/2015] [Accepted: 01/17/2015] [Indexed: 01/11/2023]
Abstract
We are using the label-free technique of holographic microscopy to analyze cellular parameters including cell number, confluence, cellular volume and area directly in the cell culture environment. We show that death-induced cells can be distinguished from untreated counterparts by the use of holographic microscopy, and we demonstrate its capability for cell death assessment. Morphological analysis of two representative cell lines (L929 and DU145) was performed in the culture flasks without any prior cell detachment. The two cell lines were treated with the anti-tumour agent etoposide for 1-3days. Measurements by holographic microscopy showed significant differences in average cell number, confluence, volume and area when comparing etoposide-treated with untreated cells. The cell volume of the treated cell lines was initially increased at early time-points. By time, cells decreased in volume, especially when treated with high doses of etoposide. In conclusion, we have shown that holographic microscopy allows label-free and completely non-invasive morphological measurements of cell growth, viability and death. Future applications could include real-time monitoring of these holographic microscopy parameters in cells in response to clinically relevant compounds.
Collapse
Affiliation(s)
- Zahra El-Schich
- Department of Biomedical Science, Health and Society, Malmö University, Malmö, Sweden
| | | | - Helena Tassidis
- Department of Natural Science, Kristianstad University, Kristianstad, Sweden
| | - Pirkko Härkönen
- Department of Cell Biology and Anatomy, Institute of Biomedicine, University of Turku, Turku, Finland
| | - Maria Falck Miniotis
- Department of Biomedical Science, Health and Society, Malmö University, Malmö, Sweden
| | | |
Collapse
|
19
|
Schürmann M, Scholze J, Müller P, Chan CJ, Ekpenyong AE, Chalut KJ, Guck J. Refractive index measurements of single, spherical cells using digital holographic microscopy. Methods Cell Biol 2015; 125:143-59. [PMID: 25640428 DOI: 10.1016/bs.mcb.2014.10.016] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
In this chapter, we introduce digital holographic microscopy (DHM) as a marker-free method to determine the refractive index of single, spherical cells in suspension. The refractive index is a conclusive measure in a biological context. Cell conditions, such as differentiation or infection, are known to yield significant changes in the refractive index. Furthermore, the refractive index of biological tissue determines the way it interacts with light. Besides the biological relevance of this interaction in the retina, a lot of methods used in biology, including microscopy, rely on light-tissue or light-cell interactions. Hence, determining the refractive index of cells using DHM is valuable in many biological applications. This chapter covers the main topics that are important for the implementation of DHM: setup, sample preparation, and analysis. First, the optical setup is described in detail including notes and suggestions for the implementation. Following that, a protocol for the sample and measurement preparation is explained. In the analysis section, an algorithm for the determination of quantitative phase maps is described. Subsequently, all intermediate steps for the calculation of the refractive index of suspended cells are presented, exploiting their spherical shape. In the last section, a discussion of possible extensions to the setup, further measurement configurations, and additional analysis methods are given. Throughout this chapter, we describe a simple, robust, and thus easily reproducible implementation of DHM. The different possibilities for extensions show the diverse fields of application for this technique.
Collapse
Affiliation(s)
- Mirjam Schürmann
- Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany
| | - Jana Scholze
- Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany
| | - Paul Müller
- Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany
| | - Chii J Chan
- Cavendish Laboratory, Department of Physics, University of Cambridge, Cambridge, UK; Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany
| | - Andrew E Ekpenyong
- Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany; Department of Physics, Creighton University, Omaha, NE, USA
| | - Kevin J Chalut
- Cavendish Laboratory, Department of Physics, University of Cambridge, Cambridge, UK; Wellcome Trust/Medical Research Council Stem Cell Institute, Cambridge, UK
| | - Jochen Guck
- Biotechnology Center, Technische Universität Dresden, Tatzberg, Dresden, Germany; Cavendish Laboratory, Department of Physics, University of Cambridge, Cambridge, UK
| |
Collapse
|
20
|
Seo KB, Kim BM, Kim ES. Digital holographic microscopy based on a modified lateral shearing interferometer for three-dimensional visual inspection of nanoscale defects on transparent objects. Nanoscale Res Lett 2014; 9:471. [PMID: 25249822 PMCID: PMC4171088 DOI: 10.1186/1556-276x-9-471] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2014] [Accepted: 08/26/2014] [Indexed: 06/01/2023]
Abstract
A new type of digital holographic microscopy based on a modified lateral shearing interferometer (LSI) is proposed for the detection of micrometer- or nanometer-scale defects on transparent target objects. The LSI is an attractive interferometric test technique because of its simple configuration, but it suffers from the so-called 'duplicate image' problem, which originates from the interference of two sheared object beams. In order to overcome this problem, a modified LSI system, which employs a new concept of subdivided two-beam interference (STBI), is proposed. In this proposed method, an object beam passing through a target object is controlled and divided into two areas with and without object information, which are called half-object and half-reference beams, respectively. Then, these two half-beams make an interference pattern just like most two-beam interferometers. Successful experiments with a test glass panel for mobile displays confirm the feasibility of the proposed method and suggest the possibility of its practical application to the visual inspection of micrometer- or nanometer-scale defects on transparent objects.
Collapse
Affiliation(s)
- Kwang-Beom Seo
- HoloDigilog Human Media Research Center (HoloDigilog), 3D Display Research Center (3DRC), Kwangwoon University, 447-1 Wolge-Dong, Nowon-Gu, Seoul 139-701, Korea
| | - Byung-Mok Kim
- HoloDigilog Human Media Research Center (HoloDigilog), 3D Display Research Center (3DRC), Kwangwoon University, 447-1 Wolge-Dong, Nowon-Gu, Seoul 139-701, Korea
| | - Eun-Soo Kim
- HoloDigilog Human Media Research Center (HoloDigilog), 3D Display Research Center (3DRC), Kwangwoon University, 447-1 Wolge-Dong, Nowon-Gu, Seoul 139-701, Korea
| |
Collapse
|
21
|
Jourdain P, Becq F, Lengacher S, Boinot C, Magistretti PJ, Marquet P. The human CFTR protein expressed in CHO cells activates aquaporin-3 in a cAMP-dependent pathway: study by digital holographic microscopy. J Cell Sci 2013; 127:546-56. [PMID: 24338365 DOI: 10.1242/jcs.133629] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023] Open
Abstract
The transmembrane water movements during cellular processes and their relationship to ionic channel activity remain largely unknown. As an example, in epithelial cells it was proposed that the movement of water could be directly linked to cystic fibrosis transmembrane conductance regulator (CFTR) protein activity through a cAMP-stimulated aqueous pore, or be dependent on aquaporin. Here, we used digital holographic microscopy (DHM) an interferometric technique to quantify in situ the transmembrane water fluxes during the activity of the epithelial chloride channel, CFTR, measured by patch-clamp and iodide efflux techniques. We showed that the water transport measured by DHM is fully inhibited by the selective CFTR blocker CFTRinh172 and is absent in cells lacking CFTR. Of note, in cells expressing the mutated version of CFTR (F508del-CFTR), which mimics the most common genetic alteration encountered in cystic fibrosis, we also show that the water movement is profoundly altered but restored by pharmacological manipulation of F508del-CFTR-defective trafficking. Importantly, whereas activation of this endogenous water channel required a cAMP-dependent stimulation of CFTR, activation of CFTR or F508del-CFTR by two cAMP-independent CFTR activators, genistein and MPB91, failed to trigger water movements. Finally, using a specific small-interfering RNA against the endogenous aquaporin AQP3, the water transport accompanying CFTR activity decreased. We conclude that water fluxes accompanying CFTR activity are linked to AQP3 but not to a cAMP-stimulated aqueous pore in the CFTR protein.
Collapse
Affiliation(s)
- Pascal Jourdain
- Brain Mind Institute, Ecole Polytechnique Fédérale de Lausanne (EPFL), 1015 Lausanne, Switzerland
| | | | | | | | | | | |
Collapse
|