Deep eutectic polymer/Ti3C2Tx for enhancing mechanical properties, photothermal conversion, and bacterial inactivation of cellulose textiles

Two-dimensional (2D) transition metal carbides (Ti3C2Tx MXene) have gained significant attention for their potential in constructing diverse functional materials, However, MXene is easily oxidized and weakly bound to the cellulose matrix, which pose challenges in developing MXene-decorated non-woven fabric with strong bonding and stable thermal management properties. Herein, we successfully prepared deep eutectic supramolecular polymer (DESP) functionalized MXene to address these issues. MXene can be wrapped with DESP to be insulated from water and protected from being oxidized. Subsequently, we achieved an efficient in-situ deposition of DESP-functionalized MXene onto fibers through a combination of dip coating and photopolymerization technique. The resulting nonwoven fabric (CNs-DESP@M) exhibited excellent photothermal conversion properties along with rapid thermal response and functional stability. Interestingly, the interface bonding between MXene and the fiber surface was significantly enhanced due to the abundant pyrogallol groups in DESP, resulting in the composite textile exhibiting commendable mechanical properties (2.68 MPa). Moreover, the as-prepared textile demonstrates outstanding bactericidal efficacy against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The multifunctional textile, created through a facile and efficient approach, demonstrates remarkable potential for applications in smart textiles, catering to the diverse needs of individuals in the future.

A novel modified polydopamine based on melanin-like materials for antibacterial, hydrophobic, and ultraviolet protective of textiles

The development of environmentally friendly multifunctional auxiliaries for textile modification is the focus of attention in textile industry in recent years. Polydopamine is an important biological macromolecule and widely used in biomedicine, nanomaterials, material surface modification and other fields. In this study, the novel multifunctional melanin-like nanoparticles (Nha-PDA NPs) were prepared and used for antibacterial, hydrophobic, and UV protective of textiles. Nha-PDA NPs were prepared with dopamine (DA) and n-hexylamine (Nha) by simple autoxidation copolymerization. Nha-PDA NPs were bound to the fabric surface through the PDA structure in Nha-PDA NPs that has been widely confirmed to have strong adhesion on the surface of many materials. The modified fabrics, Nha-PDA NPs@Cotton, had good hydrophobic, antibacterial and UV protective properties. The static water contact angles of the modified fabrics could reach 120°. The antibacterial rates of Nha-PDA NPs@Cotton against E. coli and S. aureus were above 85 %. The maximum UPF value of the modified cotton was 362, indicating that the ultraviolet protection performance was excellent. The fabric modified with multifunctional melanin-like nanoparticle provides a green way for the multifunctional modification of textiles.

Synthesis and application of multifunctional lignin-modified cationic waterborne polyurethane in textiles

Waterborne polyurethanes (WPUs) often have limitations like inadequate weathering resistance and thermal stability. To overcome these shortcomings, lignin has been selected as a modifier for its abundant availability, renewability, and biocompatibility. This study synthesized a cationic WPU using isophorone diisocyanate and polyethylene glycol as raw materials. Hydrophilicity was attained through the inclusion of dihydroxyethyl dodecylamine as a chain extender, while the introduction of epoxy monomers and lignin served to modify the polyurethane. Furthermore, a dye dispersion for cotton fabric dyeing was prepared by combining the synthesized polyurethane, chitosan, and dyes. The cationic nature of the polyurethane played a crucial role in facilitating dye adhesion and uptake on the fabric surface, resulting in improved dyeing performance. The incorporation of epoxy side chains and chitosan cross-linking contributed to the excellent color fastness of the dyed fabrics. Moreover, the incorporation of lignin and chitosan endowed the fabric with antibacterial properties. Simultaneously, it provided effective UV protection, characterized by a high UV protection factor value for the fabrics. This lignin-modified WPU exhibits tremendous potential in applications such as textile coatings, adhesives, and color fixation agents. It effectively addresses the limitations of traditional WPUs and offers notable advantages, including a renewable source, cost-effectiveness, and biocompatibility.

Determination of hexavalent chromium in textiles of daily use by ion chromatography and dermal risk assessment

The determination of hexavalent chromium in textiles and clothes is challenging since during extraction, the original oxidation state should not be altered. Since, as a matter of fact, current analytical methods are focused only on total chromium determination, the purpose of this research is to develop a reliable analytical method for the determination of Cr(VI) in textiles and tissues of daily use for a reliable application of risk analysis models, which are usually based on total Cr data. After optimization, a 0.0025 M Na3PO4 extraction solution was selected for the extraction of Cr(VI) from textiles. This solution minimizes possible interconversion redox reactions and interference, and provides good extraction recoveries (88.4 ± 2.5% - 105.5 ± 0.6 %, according to Cr(VI) concentration) and quantitation limits (0.017 mg/kg), fully complying the current limits set for Cr(VI) in textiles in contact with skin, and for leachable Cr(VI). The developed method was validated investigating intra-day repeatability (n = 10) and inter-day repeatability (n = 30) which were below 12%, and matrix effect which was below 6% confirming the precision of the method and the negligibility of a matrix interference during the whole analysis. The method, which was proved to be suited also for bioaccessibility studies in saliva and sweat, was applied to the analysis of tank top, coloured paper napkin, polyamide tights, panties, highlighting Cr(VI) content in the panties only at very low concentration (0.028 mg/kg). As verified by ECHA and US EPA approaches, this amount does not pose a non-carcinogenic risk for human health. As regards carcinogenic risk, considering both adult and child exposure, the dermal contact with the panties poses an acceptable risk (R ≤ 10-6).

Effect of microplastics deposition on human lung airways: A review with computational benefits and challenges

Microplastics have become omnipresent in the environment, including the air we inhale, the water we consume, and the food we eat. Despite limited research, the accumulation of microplastics within the human respiratory system has garnered considerable interest because of its potential implications for health. This review offers a comprehensive examination of the impacts stemming from the accumulation of microplastics on human lung airways and explores the computational benefits and challenges associated with studying this phenomenon. The existence of microplastics in the respiratory system can lead to a range of adverse effects. Research has indicated that microplastics can induce inflammation, oxidative stress, and impaired lung function. Furthermore, the small size of microplastics allows them to penetrate deep into the lungs, reaching the alveoli, where gas exchange takes place. This raises concerns about long-term health consequences, such as the development of respiratory diseases and the potential for translocation to other organs. Computational approaches have been instrumental in understanding the impact of microplastic deposition on human lung airways. Computational models and simulations enable the investigation of particle dynamics, deposition patterns, and interaction mechanisms at various levels of complexity. However, studying microplastics in the lung airways using computational methods presents several challenges. The complex anatomy and physiological processes of the respiratory system require accurate representation in computational models. Obtaining relevant data for model validation and parameterization remains a significant hurdle. Additionally, the diverse nature of microplastics, including variations in size, shape, and chemical composition, poses challenges in capturing their full range of behaviours and potential toxicological effects.

In vitro study on the transmission of multidrug-resistant bacteria from textiles to pig skin

BACKGROUND

The survival of microorganisms on textiles and specifically on healthcare professionals' (HCP) attire has been demonstrated in several studies. The ability of microorganisms to adhere and remain on textiles for up to hours or days raises questions as to their possible role in transmission from textile to skin via HCP to patients.

AIM

To evaluate the presence, survival and transmission of different multidrug-resistant bacteria (MDRB) from HCP attire onto skin.

METHODS

Three MDRB [methicillin-resistant Staphylococcus aureus (MRSA); vancomycin-resistant Enterococcus faecium (VRE); carbapenem-resistant Klebsiella pneumoniae, CRKP)] were inoculated on textiles from scrubs (60% cotton-40% polyester) and white coat (100% cotton) at concentrations of 108 colony-forming units (CFU), 105 CFU, and 103 CFU per mL. The inoculation of swatches was divided in time intervals of 1 min, 5 min, 15 min, 30 min, 1 h, 2 h, 3 h, 4 h, 5 h, and 6 h. At the end of each period, textiles were imprinted onto pig skins and each skin square was inverted onto three different selective chromogenic media. Growth from the pig skin squares was recorded for the 3 MDRB at the three above concentrations, for the whole length of the 6-h experiment.

RESULTS

MRSA was recovered from pig skins at all concentrations for the whole duration of the 6-h study. VRE was recovered from the concentration of 108 CFU/mL for 6 h and from 105 CFU/mL for up to 3 h, while showing no growth at 103 CFU/mL. CRKP was recovered from 108 CFU/mL for 6 h, up to 30 min from 105 CFU/mL and for 1 min from the concentration of 103 CFU/mL.

CONCLUSION

Evidence from the current study shows that MRSA can persist on textiles and transmit to skin for 6 h even at low concentrations. The fact that all MDRB can be sustained and transferred to skin even at lower concentrations, supports that textiles are implicated as vectors of bacterial spread.

Smart and programmed thermo-wetting yarns for scalable and customizable moisture/heat conditioning textiles

Programmable smart textiles with adaptive moisture/heat conditioning (MHC) capabilities are globally being sought to meet the requirements of comfort, energy efficiency, and health protection. However, a universal strategy for fabricating truly scalable and customizable MHC textiles is lacking. In this study, we introduce a scalable in situ grafting approach for the continuous fabrication of two series of smart textile yarns with opposite thermoresponsive wetting behaviors. In particular, the wetting transition temperature can be precisely programmed by adjusting the grafting formula, making the yarns highly customizable. The smart yarns demonstrated excellent mechanical strength, whiteness, weavability, biocompatibility, and washability (with more than 60 home washes), comparable to those of regular textile yarns. They can serve as building blocks independently or in combination to create smart textiles with adaptive sweat wicking and intelligent moisture/heat regulation capabilities. A proposed hybrid textile integrating both the two series of smart yarns can offer dry-contact and cooling/keep-warming effects of approximately 1.6/2.8 °C, respectively, in response to changes in ambient temperature. Our method provides a rich array of design options for nonpowered MHC textiles while maintaining a balance between traditional wearing conventions and large-scale production.

Cellulosic and microplastic fibers in the Antarctic fish Harpagifer antarcticus and Sub-Antarctic Harpagifer bispinis

Human settlements within the Antarctic continent have caused significant coastal pollution by littering plastic. The present study assessed the potential presence of microplastics in the gastrointestinal tract of the Antarctic fish Harpagifer antarcticus, endemic to the polar region, and in the sub-Antarctic fish Harpagifer bispinis. H. antarcticus. A total of 358 microfibers of multiple colors were found in 89 % of H. antarcticus and 73 % of H. bispinis gastrointestinal track. A Micro-FTIR analysis characterized a sub-group (n = 42) of microfibers. It revealed that most of the fibers were cellulose (69 %). Manmade fibers such as microplastics polyethylene terephtalate, acrylics, and semisynthetic/natural cellulosic fibers were present in the fish samples. All the microfibers extracted were textile fibers of blue, black, red, green, and violet color. Our results suggest that laundry greywater discharges of human settlements near coastal waters in Antarctica are a major source of these pollutants in the Antarctic fish.

Solvent-free automated thermal desorption-gas chromatography/mass spectrometry for direct screening of hazardous compounds in consumer textiles

The global production of textiles utilizes numerous large-volume chemicals that may remain to some extent in the finished garments. Arylamines, quinolines, and halogenated nitrobenzene compounds are possible mutagens, carcinogens and/or skin sensitizers. For prevention, control of clothing and other textiles must be improved, especially those imported from countries without regulations of textile chemicals. An automated analytical methodology with on-line extraction, separation, and detection would largely simplify screening surveys of hazardous chemicals in textiles. Automated thermal desorption-gas chromatography/mass spectrometry (ATD-GC/MS) was developed and evaluated as a solvent-free, direct chemical analysis for screening of textiles. It requires a minimum of sample handling with a total run time of 38 min including sample desorption, chromatographic separation, and mass spectrometric detection. For most of the studied compounds, method quantification limit (MQL) was below 5 µg/g for 5 mg of textile sample, which is sufficiently low for screening and control of quinoline and arylamines regulated by EU. Several chemicals were detected and quantified when the ATD-GC/MS method was applied in a limited pilot screening of synthetic fiber garments. A number of arylamines were detected, where some of the halogenated dinitroanilines were found in concentrations up to 300 µg/g. This is ten times higher than the concentration limit for similar arylamines listed by the EU REACH regulation. Other chemicals detected in the investigated textiles were several quinolines, benzothiazole, naphthalene, and 3,5-dinitrobromobenzene. Based on the present results, we suggest ATD-GC/MS as a screening method for the control of harmful chemicals in clothing garments and other textiles.

Effects of polypropylene nanofibers on soft corals

Current information regarding the effects of both micro- and nano-plastic debris on coral reefs is limited; especially the toxicity onto corals from nano-plastics originating from secondary sources such as fibers from synthetic fabrics. Within this study, we exposed the alcyonacean coral Pinnigorgia flava to different concentrations of polypropylene secondary nanofibers (0.001, 0.1, 1.0 and 10 mg/L) and then assayed mortality, mucus production, polyps retraction, coral tissue bleaching, and swelling. The assay materials were obtained by artificially weathering non-woven fabrics retrieved from commercially available personal protective equipment. Specifically, polypropylene (PP) nanofibers displaying a hydrodynamic size of 114.7 ± 8.1 nm and a polydispersity index (PDI) of 0.431 were obtained after 180 h exposition in a UV light aging chamber (340 nm at 0.76 Wˑm^-2ˑnm^-1). After 72 h of PP exposure no mortality was observed but there were evident stress responses from the corals tested. Specifically, the application of nanofibers at different concentrations caused significant differences in mucus production, polyps retraction and coral tissue swelling (ANOVA, p < 0.001, p = 0.015 and p = 0.015, respectively). NOEC (No Observed Effect Concentration) and LOEC (Lowest Observed Effect concentration) at 72 h resulted 0.1 mg/L and 1 mg/L, respectively. Overall, the study indicates that PP secondary nanofibers can cause adverse effects on corals and could potentially act as a stress factor in coral reefs. The generality of the method of producing and assaying the toxicity of secondary nanofibers from synthetic textiles is also discussed.

Improving of an easy, effective and low-cost method for isolation of microplastic fibers collected in drying machines filters

Microplastic fibers have been found to be a dominant form of microplastics in water matrixes, and textile industry and domestic washing of synthetic textiles as one of its main sources. Additionally, there is a lack of knowlidge about microplastic fiber release during mechanically drying clothes and textiles due to differences in the isolation of microplastic fiber methods. Limited information available in the literature in terms of the isolation of microplastic fibers from organic-rich samples after using different household equipment represents one of the main challenges leading us to our main goal, to optimise an effective, simple, and low-cost method for the isolation of microplastic fibers from textile fibers of different origins without damaging their structure. This is achieved by primarily removing mineral matter by using density separation with a saturated solution of ZnCl₂ followed by removal of organic matter by using hydrogen peroxide (H₂O₂) and FeCl₃ as a catalyst. Identification of microplastic fibers was obtained by optical microscope, Fourier-transform infrared spectroscopy and Thermogravimetric analysis. Clear microscope (both optical and SEM) images, high percentage of obtained FTIR spectra overlap with Polymer Sample laboratory, clear TGA of isolated samples confirmed that this method can be used as a simple and effective method for isolation of microplastic fibers from organic components rich samples of different origin.

Color-variable dual-dyed photodynamic antimicrobial polyethylene terephthalate (PET)/cotton blended fabrics

The urgent demand for scalable, potent, color variable, and comfortable antimicrobial textiles as personal protection equipment (PPE) to help reduce infection transmission in hospitals and healthcare facilities has significantly increased since the start of the COVID-19 pandemic. Here, we explored photodynamic antimicrobial polyethylene terephthalate/cotton (TC) blended fabrics comprised of photosensitizer-conjugated cotton fibers and polyethylene terephthalate (PET) fibers dyed with disperse dyes. A small library of TC blended fabrics was constructed wherein the PET fibers were embedded with traditional disperse dyes dominating the fabric color, thereby enabling variable color expression, while the cotton fibers were covalently coupled with the photosensitizer thionine acetate as the microbicidal agent. Physical (SEM, CLSM, TGA, XPS and mechanical strength) and colorimetric (K/S and CIELab values) characterization methods were employed to investigate the resultant fabrics, and photooxidation studies with DPBF demonstrated the ability of these materials to generate reactive oxygen species (i.e., singlet oxygen) upon visible light illumination. The best results demonstrated a photodynamic inactivation of 99.985% (~ 3.82 log unit reduction, P = 0.0021) against Gram-positive S. aureus, and detection limit inactivation (99.99%, 4 log unit reduction, P ≤ 0.0001) against Gram-negative E. coli upon illumination with visible light (60 min; ~ 300 mW/cm²; λ ≥ 420 nm). Enveloped human coronavirus 229E showed a photodynamic susceptibility of ~ 99.99% inactivation after 60 min illumination (400-700 nm, 65 ± 5 mW/cm²). The presence of the disperse dyes on the fabrics showed no significant effects on the aPDI results, and furthermore, appeared to provide the photosensitizer with some measure of protection from photobleaching, thus improving the photostability of the dual-dyed fabrics. Taken together, these results suggest the feasibility of low cost, scalable and color variable thionine-conjugated TC blended fabrics as potent self-disinfecting textiles.

Formation of microplastic fibers and fibrils during abrasion of a representative set of 12 polyester textiles

Microplastic fibers (MPFs) released from synthetic textiles have been found to be a major source of microplastic in the environment. There is increasing evidence available that MPFs released during washing were likely formed during the manufacturing stage. However, real-life use of textiles is often associated with textile-on-textile abrasion, and the first evidence is available that MPFs and finer microplastic fiber fragments (fibrils) are formed during abrasion. In this study, we characterized the formation of MPFs and fibrils from a representative set of 12 polyester textiles after abrasion tests conducted with a Martindale tester. We also investigated the influence of rub intensity and the extractability of MPFs and fibrils from the abraded fabrics. For all textiles, the MPFs extracted after abrasion showed the same diameter as the fibers in non-abraded textiles (10-20 μm), while the extracted fibrils were much thinner (3-5 μm). The variability in the structure of the different polyester textiles led to a broad range of MPF and fibrils extracted during the first wash after 5000 rubs. One gram of textile released between 4900 and 640,000 MPFs and between 0 and 350,000 fibrils with an average fibril/MPF ratio of 0.8. The total number of MPFs and fibrils formed during abrasion was positively correlated with the increase in the number of rubs up to 10,000 times. Visible pilling on the textile surface was an important indicator for the formation of MPFs and fibrils. Our study revealed that textile abrasion is a critical, realistic, and overlooked mechanism for the formation of MPFs and fibrils, as abraded textiles (after 5000 times rubs) can release more than ten times the number of MPFs and fibrils compared to washing only.

Quantification of microfibre release from textiles during domestic laundering

Domestic laundering of textiles is being increasingly recognised as a significant source of microfibre pollution. Reliable quantification of microfibre release is necessary to understanding the scale of this issue and to evaluate the efficacy of potential solutions. This study explores three major factors that influence the quantification of microfibres released from the domestic laundering of textiles: test methodologies, laundering variables, and fabric variables.A review of different test methods is presented, highlighting the variation in quantification created by using different methodologies. A reliable and reproducible method for quantifying microfibre release from domestic laundering is used to explore the impact of laundering and fabric variables experimentally. The reproducibility and reliability of the method used was validated through inter-laboratory trials and has informed the development of European and international testing standards. Our results show that increasing the wash liquor ratio and wash agitation results in a greater mass of microfibres released, but we found that fabric variables can have a greater influence on microfibre release than the laundering variables tested in this study. However, no single fabric variable appeared to have a dominant influence.Using the data obtained and assumptions for washing load size and frequency, results were scaled to reflect possible annual microfibre release from untreated domestic laundering in the UK. Depending on different laundering and fabric variables, these values range from 6490 tonnes to 87,165 tonnes of microfibre discharged in the UK each year.

The use of lipids from textiles as soft-tissue biomarkers of human decomposition

The ability to determine the post-mortem interval (PMI) in complex death investigations involving human remains, is a vital task faced by law enforcement. Establishing the PMI in a case can significantly aid in the reconstruction of forensically relevant events surrounding that death. However, due to the complexities surrounding the decomposition of human remains, the determination of the PMI still remains a challenge in some cases. Thus, the identification of biomarkers of human decomposition are an emerging, and essential, area of research. Previous studies have also demonstrated great success in the use of textiles as a host to indirectly capture decomposition by-products. This study reports the successful adaptation and optimisation of an analytical chemical workflow for the targeted analysis of lipids from textiles associated with decomposing human remains using gas-chromatography (GC) coupled with tandem mass spectrometry (MS/MS). This study discusses novel information regarding the complex challenges of matrix effects observed with decomposition samples. In addition, the first lipid profiles obtained from textiles associated with two decomposing human donors from the Australian Facility for Taphonomic Experimental Research (AFTER) using GC-MS/MS are presented.

Tutorial review on the processing and performance of fabrics with antipathogenic inorganic agents

Functionalized textiles have been increasingly used for enhancing antimicrobial or antiviral (antipathogenic) action. Those pathogens can cause recurring diseases by direct or indirect transmission. Particularly, airborne microorganisms may cause respiratory diseases or skin infections like allergies and acne and the use of inorganic agents such as metal and metal oxides has proven effective in antipathogen applications. This review is a tutorial on how to obtain functional fabric with processes easily applied for industrial scale. Also, this paper summarizes relevant textiles and respective incorporated inorganic agents, including their antipathogenic mechanism of action. In addition, the processing methods and functional finishing, on a laboratory and industrial scale, to obtain a functional textile are shown. Characterization techniques, including antipathogenic activity and durability, mechanical properties, safety, and environmental issues, are presented. Challenges and perspectives on the broader use of antipathogenic fabrics are discussed.

Hazardous chemical elements in cleaning cloths, a potential source of microfibres

Although potentially hazardous chemical elements (e.g., Cu, Cr, Pb, Sb, Ti, Zn) have been studied in clothing textiles, their presence in cleaning textiles is unknown. In this study, 48 cleaning cloth products (consisting of 81 individual samples) purchased in Europe, and consisting of synthetic (petroleum-based), semi-synthetic or natural fibres or combinations of these different types, have been analysed for 16 chemical elements by X-ray fluorescence (XRF) spectrometry. Titanium was detected in most cases (median and maximum concentrations ~3700 and 12,400 mg kg^-1, respectively) and Raman microspectroscopy revealed that TiO₂ was present as anatase. Barium, Br, Cr, Cu, Fe and Zn were frequently detected over a range of concentrations, reflecting the presence of various additives, and Sb was present at concentrations up to about 200 mg kg^-1 in samples containing polyester as catalytic residue from the polymerisation process. Lead was detected as a contaminant in four samples and at concentrations below 10 mg kg^-1. Overall, the range of the chemical element profiles and concentrations was similar to those for clothing materials published in the literature, suggesting that broadly the same additives, materials and processes are employed to manufacture cloths and clothing textiles. The mechanisms by which potentially hazardous chemical elements are released into the environment with microfibres or mobilised into soluble or nano-particulate forms remain to be explored.

Developing textile sustainability education in the curriculum: pedagogical approaches to material innovation in fashion

The textile industry needs to adopt environmentally sustainable approaches to address ecologically damaging practices. Whilst driven by initiatives such as Textiles 2030, it is current students who will carry this agenda forward. This project investigated pedagogical approaches to develop sustainable textiles for the fashion design curriculum. Pilot studies, using bacterial cellulose (BC) as a material for millinery, revealed members of the public were prepared to experiment with this novel material, and BC was compatible with traditional hat-making techniques. A further study challenged secondary school students, based on an experiential learning model, to grow their own BC biofilm, exploring this as a sustainable apparel fabric. Initial attitudes of reluctance developed into acceptance once engaged in the practical activity. This study illustrates that with appropriate communication and education strategies, the principles of sustainability in fashion, and the acceptability of novel materials, can be engendered in different audiences.

Review on alternatives for the reduction of textile microfibers emission to water

The microplastics (MPs) are considered one of the most threatening pollutants. One of the main concerns is their continuous and cumulative flow to water environments, as they are very difficult to be removed. Microfibers (MFs) are a significant type of MPs, with textile articles as one of the most renowned sources. This review aims to provide the current status of these MFs as pollutants, discussing possible alternatives from the manufacturing until the final disposition of MFs. There are many alternatives to reduce these pollutants from reaching the environment but also gaps that need to be further evaluated and addressed. Besides, it should be noticed that alternatives could be complementary between them. Some viable and non-contaminating solutions to reduce this pollution are currently on the market. Also, one relevant aspect is the final disposition or usage of the retained MFs to avoid them from reaching aquatic environments.

Assessing Fuzzy Cognitive Mapping as a participatory and interdisciplinary approach to explore marine microfiber pollution

Fuzzy Cognitive Mapping (FCM) is a participatory modelling tool used to explore complex systems by facilitating interdisciplinary cooperation and integrating a variety of knowledge systems. Here FCM was used to explore marine microfiber pollution. Through individual interviews with representatives from the research, industry, water and environmental sectors, five stakeholder FCMs were developed and used to produce an aggregated community FCM in a stakeholder workshop. Stakeholder FCMs and the revised community FCM were used to compute how the modelled system reacted to changes under two scenarios developed during the stakeholder workshop; (i) Green Shift and (ii) increased textile consumption and production. Significant differences were observed in scenario results from the stakeholder-based models and the community-based model. For societal challenges characterized by unknowns around the problem and potential solutions, inclusion of a variety of knowledge systems through FCM and deliberation processes contribute to a more holistic picture of the system and its uncertainties.

Antiviral/antibacterial biodegradable cellulose nonwovens as environmentally friendly and bioprotective materials with potential to minimize microplastic pollution

Personal protective equipment (PPE) such as face masks is vital in battling the COVID-19 crisis, but the dominant polypropylene-based PPE are lack of antiviral/antibacterial activities and environmental friendliness, and have hazardous impact on the soil and aquatic ecosystems. The work presented herein focused on developing biodegradable, antiviral, and antibacterial cellulose nonwovens (AVAB-CNWs) as a multi-functional bioprotective layer for better protection against coronavirus SARS-CoV-2 and addressing environmental concerns raised by the piling of COVID-19 related wastes. Both guanidine-based polymer and neomycin sulfate (NEO) were reactive-modified and covalently grafted onto the surface of cellulose nonwovens, thereby conferring outstanding antiviral and antibacterial activities to the nonwovens without deteriorating the microstructure and biodegradability. Through adjusting the grafting amount of active components and selecting appropriate reagents for pretreatment, the antimicrobial activity and hydrophobicity for self-cleaning of the nonwovens can be tuned. More importantly, we demonstrated for the first time that such multi-functional nonwovens are capable of inactivating SARS-CoV-2 instantly, leading to high virucidal activity (> 99.35%), which is unachievable by conventional masks used nowadays. Meanwhile, the robust breathability and biodegradability of AVAB-CNWs were well maintained. The applications of the as-prepared nonwovens as high-performance textile can be readily extended to other areas in the fight against COVID-19.

A preliminary investigation of underwear as a support for condom evidence in rape and sexual assault cases

Condom lubricants have been found to be a new type of evidence to investigate and analyze in sexual assaults and rape cases. Casework studies highlighted two main types of trace evidence supports collected from the victim and send to forensic laboratories: cotton swabs and victims' underwear. If cotton swabs have been used in most of the recent published research papers, the underwear and the textile effects on the recovery of condom lubricants are under investigated although such studies are very important for the interpretation of the evidence, as highlighted in the Regina v. Andrew Nicholas Malkinson case. This work employed Diffuse Reflection Infrared Fourier Transform Spectroscopy (DRIFTS-FTIR) and Attenuated Total Reflectance (ATR-FTIR) to investigate the content of various feminine underwear and the effect of a laundry procedure on the recovery of any type of evidence. 7 laundry detergents and 9 slips from common brands/models were purchased for this study. No silicones were detected in the laundry detergents, which indicates they are unlikely to generate false positive in terms of detection of silicones. However, silicones were detected in most of the brand new underwear, which was found to be an issue when interpreting the evidence. The laundry procedure was found to significantly affect the evidence, with a strong decrease of the absorbance pre and post washing. Unfortunately, no trend regarding the temperature or the type of textile could be drawn.

Biofabrication of natural hydrogels for cardiac, neural, and bone Tissue engineering Applications

Natural hydrogels are one of the most promising biomaterials for tissue engineering applications, due to their biocompatibility, biodegradability, and extracellular matrix mimicking ability. To surpass the limitations of conventional fabrication techniques and to recapitulate the complex architecture of native tissue structure, natural hydrogels are being constructed using novel biofabrication strategies, such as textile techniques and three-dimensional bioprinting. These innovative techniques play an enormous role in the development of advanced scaffolds for various tissue engineering applications. The progress, advantages, and shortcomings of the emerging biofabrication techniques are highlighted in this review. Additionally, the novel applications of biofabricated natural hydrogels in cardiac, neural, and bone tissue engineering are discussed as well.

Rapid SERS inspection of carcinogenic aromatic amines in textiles by using liquid interfacial assembled Au array

Wide uses of azo dyes produce a great risk of high residuals of carcinogenic aromatic amines, and hence it is important to rapidly analyze these carcinogenic compounds in the textile products to guarantee product safety. In the present work, a surface enhanced Raman spectroscopic (SERS) method was developed for rapid detection of carcinogenic aromatic amines in textiles. In this method, target aromatic amines are extracted from textiles, and then gold nanoparticles are added to the organic extractant, which assemble into closely packed Au array at liquid interface in situ. Finally, fingerprint SERS signals of the target aromatic amines are detected on the generated Au array on the basis of strong chemical interaction between the aromatic amines and the Au surface. The proposed method provided good reproducibility with a relative standard deviation of 3.5% for ten parallel tests of benzidine. It was applied to analyze 70 textile products. To strengthen the spectroscopic data processing, a cluster analysis model was established with 50 samples to automatically identify the spectra based on the good signal reproducibility. The other 20 samples were used as test sets to validate this model. It was found that all the positive samples were successfully identified with false positive rate of 20%. With the addition of the Artificial Intelligence step, the reliability of the discriminant results can be ensured.

Microplastic fibers - Underestimated threat to aquatic organisms?

Awareness of microplastic pollution in aquatic environments increased strongly during the last decade. Environmental monitoring studies detected microplastic items in every tested water body and found them in various aquatic organisms. Yet, many studies conducted so far, refer to microplastic particles and spheres but not fibers. Microplastic fibers are often not considered due to methodological issues and high contamination risk during sampling and analysis. Only a few of the microplastic exposure studies with aquatic organisms were conducted with microplastic fibers. Recent effect studies demonstrated several negative impacts of microplastic fibers on aquatic organisms, which include tissue damage, reduced growth, and body condition and even mortality. Such negative effects were predominantly observed in taxa at the basis of the food chain. Higher taxa were less heavily affected in direct exposure experiments, but they presumably suffer from negative effects on organisms at lower food chain levels in the wild. Consequently, ongoing and future pollution with microplastic fibers may disturb the functioning of aquatic ecosystems. The present review outlines the current state of knowledge on microplastic fiber abundance in nature, bioavailability, and impacts on aquatic animals. Based on these findings, we recommend inclusion of microplastic fibers in prospective monitoring studies, discuss appropriate methods, and propose to conduct exposure studies with - as well as risk assessments of - these underestimated pollutants.

Oleophobic textiles with embedded liquid and vapor hazard detection using differential planar microwave resonators

Protective clothing must repel hazardous liquids such as oils, acids, and solvents, which often exhibit low surface tension. The low surface tension liquid repellency of textiles is currently characterized qualitatively, considering only the first thirty seconds of wetting. This study demonstrates that embedded sensors within protective fabrics can more fully characterize liquid repellency while simultaneously detecting the hazardous substance. The liquid repellency of oleophobic textiles was detected in-situ using differential planar microwave resonator structures. A differential split ring resonator was designed with resonant responses at 4.4 and 4.6 GHz with a sensitivity of 50 MHz per unit ε. Fabrics were rendered oleophobic by dip-coating. The liquid repellency was monitored in-situ using droplets of heptane, octane, decane, dodecane, and water. Wetting transitions and droplet evaporation were identified in real time. The 4.4 GHz resonance peak's shift was used to measure the liquid repellency, whereas the 4.6 GHz resonator monitored the liquid's vapor as it absorbed into a gas-sensitive elastomer. The microwave response was tracked over 10 h every 15 s, and this transient data could identify the liquids based on their wetting and evaporation rates. Such sensors could be readily embedded in oleophobic textiles and enhance personal protective equipment.

Impact of dyes and finishes on the aquatic biodegradability of cotton textile fibers and microfibers released on laundering clothes: Correlations between enzyme adsorption and activity and biodegradation rates

The presence and biodegradability of textile microfibers shed during laundering or use is an important environmental issue. In this research, the influence of common textile finishes on the persistence of cotton fibers in an aerobic aquatic environment was assessed. The biodegradation of cotton knitted fabrics with different finishes, silicone softener, durable press, water repellent, and a blue reactive dye was evaluated. The rate of biodegradation decreased with durable press and water repellant finishing treatments. In terms of the final extent of biodegradation, there was no significant difference between the samples. All samples reached more than 60% biodegradation in 102 days. The biodegradation rates were in agreement with observed trends of the same samples for cellulase mediated hydrolysis and cellulase adsorption experiments, indicating the finishes impact the initial adsorption of enzymes excreted by the microorganisms and the initial rates of biodegradation, however despite this the cellulosic material maintains its biodegradability.

[A More Ample Garment-Domestic Textiles and Environmental Knowledge in the Nineteenth Century]

Drawing on sources such as home furnishing manuals, hygiene and household guidebooks, as well as literary texts, this article examines how the nineteenth-century domestic interior can be regarded as a functional environment regulated by textiles. In the debate about the correct usage of furnishing textiles in line with contemporary aesthetic and sanitary standards, women were held responsible for regulating these textile environments. While on the one hand this led to a supposedly natural and mechanical conflation of women and domestic space which has often been interpreted as restrictive and encapsulating, my aim is to identify a specific feminine agency that has its origin in the home but is not limited to it. By tracing the negotiations of this gendered textile expertise in different fields of knowledge and forms of representation, this article reevaluates the relationship between textiles, domesticity and femininity in the nineteenth century.

Transdermal uptake of benzophenone-3 from clothing: comparison of human participant results to model predictions

BACKGROUND

Models of transdermal uptake of chemicals from clothing have been developed, but not compared with recent human subject experiments. In a well-characterized experiment, participants wore t-shirts pre-dosed with benzophenone-3 (BP-3) and BP-3 and a metabolite were monitored in urine voids.

OBJECTIVE

Compare a dynamic model of transdermal uptake from clothing to results of the human subject experiment.

METHODS

The model simulating dynamic transdermal uptake from clothing was coupled with direct measurements of the gas phase concentration of benzophenone-3 (BP-3) near the surface of clothing to simulate the conditions of the human subject experiment.

RESULTS

The base-case model results were consistent with the those reported for human subjects. The results were moderately sensitive to parameters such as the diffusivity in the stratum corneum (SC), the SC thickness, and SC-air partition coefficient. The model predictions were most sensitive to the clothing fit. Tighter clothing worn during exposure period significantly increased excretion rates but tighter fit "clean" clothing during post-exposure period acts as a sink that reduces transdermal absorption by transferring BP-3 from skin surface lipids to clothing. The shape of the excretion curve was most sensitive to the diffusivity in the SC and clothing fit.

SIGNIFICANCE

This research provides further support for clothing as an important mediator of dermal exposure to environmental chemicals.

Interpol review of fibres and textiles 2016-2019

This review paper covers the forensic-relevant literature in fibres and textiles from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20Review%20Papers%202019.pdf.

Assessing the effects of textile leachates in fish using multiple testing methods: From gene expression to behavior

The textile industry, while of major importance in the world economy, is a toxic industry utilizing and emitting thousands of chemical substances into the aquatic environment. The aim of this project was to study the potentially harmful effects associated with the leaching of chemical residues from three different types of textiles: sportswear, children's bath towels, and denim using different fish models (cell lines, fish larvae and juvenile fish). A combination of in vitro and in vivo test systems was used. Numerous biomarkers, ranging from gene expression, cytotoxicity and biochemical analysis to behavior, were measured to detect effects of leached chemicals. Principle findings indicate that leachates from all three types of textiles induced cytotoxicity on fish cell lines (RTgill-W1). Leachates from sportswear and towels induced mortality in zebrafish embryos, and chemical residues from sportswear reduced locomotion responses in developing larval fish. Sportswear leachate increased Cyp1a mRNA expression and EROD activity in liver of exposed brown trout. Leachates from towels induced EROD activity and VTG in rainbow trout, and these effects were mitigated by the temperature of the extraction process. All indicators of toxicity tested showed that exposure to textile leachate can cause adverse reactions in fish. These findings suggested that chemical leaching from textiles from domestic households could pose an ecotoxicological threat to the health of the aquatic environment.

Analysis of the polyester clothing value chain to identify key intervention points for sustainability

Clothing is one of the primary human needs, and the demand is met by the global production of thousands of tons of textile fibers, fabrics and garments every day. Polyester clothing manufactured from oil-based polyethylene terephthalate (PET) is the market leader. Conventional PET creates pollution along its entire value chain-during the production, use and end-of-life phases-and also contributes to the unsustainable depletion of resources. The consumption of PET garments thus compromises the quality of land, water and air, destroys ecosystems, and endangers human health. In this article, we discuss the different stages of the value chain for polyester clothing from the perspective of sustainability, describing current environmental challenges such as pollution from textile factory wastewater, and microfibers released from clothing during the laundry cycle. We also consider potential solutions such as enhanced reuse and recycling. Finally, we propose a series of recommendations that should be applied to polyester clothing at all stages along the value chain, offering the potential for meaningful and effective change to improve the environmental sustainability of polyester textiles on a global scale.

Preparation of sheet-like covalent organic frameworks and their application for efficient preconcentration of 4-(tert-octyl)-phenol and 4-nonylphenol in textiles

In the design of highly ordered (covalent organic frameworks) COFs with "ordered domains size and orientation" construction in a well-defined arrangement, the molecular monomers are the key factors. Here, the effect of molecular monomers on the construction of COFs has been studied, and two kinds of molecular monomers, i.e., ethanediamine (flexible amine ligand) and 4,4'-diaminobiphenyl (rigid amine ligand) have been used for developing sheet-like COFs-I and sheet-like COFs-II, respectively. Furthermore, they have been evaluated in the dispersive solid phase extraction (dSPE) procedure for textiles prior to the analysis of alkylphenol by liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS). The results showed that, the optimal usage amount of sheet-like COFs-II used in the dSPE procedure was less than that of sheet-like COFs-I, which may be explained by much higher adsorption capacity of sheet-like COFs via hydrogen-bonding and π-π stacking interactions. Rectilinear calibration graphs were obtained for 4-(tert-octyl)-phenol (4-tOP) and 4-nonylphenol (4-NP) in the range 0.2-20 µg/kg with determination coefficient (r²) higher than 0.9990, and the limits of detection (LODs) of 4-tOP and 4-NP were 0.039 µg/kg and 0.048 µg/kg, respectively. The developed method has been successfully applied to analysis of 50 textile samples, in which 4-tOP and 4-NP were found in six samples with concentrations in the range of 1.6 μg/kg-20.9 μg/kg.

Asbestos exposure and autoantibody titers

Background

Asbestos is a well-known hazardous substance that causes occupational and environmental diseases including asbestosis (lung fibrosis). Silica exposure which causes silicosis (another type of lung fibrosis) has long been linked to the development of autoimmune diseases; however, there are few studies on the relationship between asbestos exposure and autoimmune diseases.

Methods

A total of 54 individuals who had worked in a former asbestos textile factory underwent autoantibody-related blood tests, chest X-ray imaging, and pulmonary function tests. Based on the job exposure matrix (JEM), the estimated asbestos exposure concentrations were determined, and the presence of asbestosis was determined by chest radiography.

Results

Scleroderma (Scl-70) and ribonucleoprotein (RNP) antibodies were significantly lowered in the pleural plaque present group than in the absent group. Additionally, Scl-70, RNP, and Sjögren's syndrome type B (SS-B) antibodies were significantly lowered in the asbestosis present group. When stratifying variables with or without asbestosis, Scl-70, Smith, SS-B, and RNP antibodies decreased in female, crocidolite handling group, and higher estimated asbestos exposure level group.

Conclusions

Contrary to our expectations that autoantibody titers would be higher in groups with high asbestos exposure or in the asbestosis group, those with asbestosis showed lower titers. But as our research has some methodological limitations, the lowered titer of autoimmune antibody in our asbestos exposed subjects could not be simply interpreted as a lowered risk of autoimmune diseases. So careful interpreting should be taken when examine autoantibodies to screening or diagnose autoimmune diseases in people with asbestos exposure. In addition, it is necessary to establish relevance of asbestosis and autoantibodies through further studies of larger scale and higher confidence levels.

Total oxidizable precursor assay in the determination of perfluoroalkyl acids in textiles collected from the United States

Per- and polyfluoroalkyl substances (PFASs) are used in specialty/functional textiles to impart oil, water, and stain repellency. Little is known, however, with regard to the occurrence of PFASs in textiles including infant clothing. In this study, 13 perfluoroalkyl acids (PFAAs), comprising four perfluoroalkyl sulfonic acids (PFSAs; C4-C10) and nine perfluoroalkyl carboxylic acids (PFCAs; C4-C12) were determined in 160 textile samples collected from the United States. Two extraction methods, one involving a simple solvent extraction (i.e., before oxidation) and the other with an oxidative treatment (i.e., after oxidation) of textile extracts, were used. The sum concentrations of 13 PFAAs (i.e., ∑PFAA) in textile extracts before oxidation ranged from <LOD to 63.7 μg/m² (<LOD-285 ng/g), with a mean value of 3.18 μg/m² (14.2 ng/g). ∑PFAA concentrations were the highest in flame retarded textiles (n = 23; mean: 13.3 μg/m²; 59.4 ng/g), followed by water repellent textiles (n = 56; 2.88 μg/m²; 12.9 ng/g) and infant clothes (n = 81; 0.521 μg/m²; 2.33 ng/g). C4-C10 PFCAs accounted for at least three-quarters of the ∑PFAA content in our textile samples. Textile extracts analyzed after oxidative treatment exhibited ∑PFAA concentrations 10-fold higher than those in extracts analyzed prior to oxidation, which suggested that PFAA precursors are used in textiles. Precursors that generated C4-C5 PFCAs, upon oxidation, were more prevalent than those that yielded PFOA. The calculated dermal exposure doses in infants of PFAAs present in clothes were at least 1-2 orders of magnitude below the reference doses proposed by the United States Environmental Protection Agency. This is the first time that the oxidative treatment was applied in the analysis of PFASs in textiles, and our results suggest the existence of PFCA precursors in textiles.

The role of textiles as fomites in the healthcare environment: a review of the infection control risk

BACKGROUND

Infectious diseases are a significant threat in both healthcare and community settings. Healthcare associated infections (HCAIs) in particular are a leading cause of complications during hospitalisation. Contamination of the healthcare environment is recognised as a source of infectious disease yet the significance of porous surfaces including healthcare textiles as fomites is not well understood. It is currently assumed there is little infection risk from textiles due to a lack of direct epidemiological evidence. Decontamination of healthcare textiles is achieved with heat and/or detergents by commercial or in-house laundering with the exception of healthcare worker uniforms which are laundered domestically in some countries. The emergence of the COVID-19 pandemic has increased the need for rigorous infection control including effective decontamination of potential fomites in the healthcare environment. This article aims to review the evidence for the role of textiles in the transmission of infection, outline current procedures for laundering healthcare textiles and review studies evaluating the decontamination efficacy of domestic and industrial laundering.

METHODOLOGY

Pubmed, Google Scholar and Web of Science were searched for publications pertaining to the survival and transmission of microorganisms on textiles with a particular focus on the healthcare environment.

RESULTS

A number of studies indicate that microorganisms survive on textiles for extended periods of time and can transfer on to skin and other surfaces suggesting it is biologically plausible that HCAIs and other infectious diseases can be transmitted directly through contact with contaminated textiles. Accordingly, there are a number of case studies that link small outbreaks with inadequate laundering or infection control processes surrounding healthcare laundry. Studies have also demonstrated the survival of potential pathogens during laundering of healthcare textiles, which may increase the risk of infection supporting the data published on specific outbreak case studies.

CONCLUSIONS

There are no large-scale epidemiological studies demonstrating a direct link between HCAIs and contaminated textiles yet evidence of outbreaks from published case studies should not be disregarded. Adequate microbial decontamination of linen and infection control procedures during laundering are required to minimise the risk of infection from healthcare textiles. Domestic laundering of healthcare worker uniforms is a particular concern due to the lack of control and monitoring of decontamination, offering a route for potential pathogens to enter the clinical environment. Industrial laundering of healthcare worker uniforms provides greater assurances of adequate decontamination compared to domestic laundering, due to the ability to monitor laundering parameters; this is of particular importance during the COVID-19 pandemic to minimise any risk of SARS-CoV-2 transmission.

Dataset supporting the identification of natural dyes in yellow, orange, brown and green fibres from Krakow liturgical vestments

This data article provides an extensive and complete description of the colorants and dyes identified in fibre samples taken from the historical textiles that were described in the article "Universal analytical method for characterization of yellow and related natural dyes in liturgical vestments from Krakow" by K. Lech [1]. Natural organic dyes, for centuries used to dye fibres, contain usually from a few to several dyeing compounds. The correct identification of the dye requires at first the identification of their colouring components using sensitive and selective analytical techniques. One of this technique is high-performance liquid chromatography combined with spectrophotometric detection and detection using tandem mass spectrometry with electrospray ionization (HPLC-UV-Vis-ESI MS/MS). The HPLC-UV-Vis-ESI MS/MS protocol was used to identify natural dyes present in 89 yellow, orange, brown and green fibres taken from 15th- to 17th-century silk textiles used in vestments belonging to the collections of seventeen churches in Krakow, Poland.

Electrospun Nanofibers-Based Face Masks

Textiles have proved to be very important materials to human beings since the time immemorial. And, fibers are the basic building units of these materials. In this perspective we substantiate the uniqueness and capability of nanofibers as active layers in face masks, to protect people against the novel coronavirus disease (COVID-19). This time-sensitive letter introduces the mechanisms based on which their active filters function, the uniqueness of electrospun nanofibers in face masks and do-it-yourself (DIY) steps to realize a fully functional face mask at home.

Phthalates in preschool children's clothing manufactured in seven Asian countries: Occurrence, profiles and potential health risks

Phthalates could be introduced into clothing as chemical additives or impurities, becoming a potential source of human exposure. We measured the concentrations of 15 phthalates in new preschool children's clothing manufactured in seven Asian countries. Phthalates were prevalent in all samples, and total concentrations were 2.92-223 μg/g, indicating a moderate contamination level. Bis(2-ethylhexyl) phthalate, di(isobutyl) phthalate and di-n-butyl phthalate were the most abundant phthalates measured, representing a median of 48.5 %, 13.6 % and 13.4 % of the total concentrations, respectively. Total concentrations did not differ significantly by country of manufacture, while the concentrations of individual phthalates and their composition profiles varied widely. We also found differing phthalate levels by item type, fabric composition, and color. Under the assumed two exposure scenarios, the median of summed dermal exposure doses of six phthalate were 539 and 950 ng/kg of body weight per day, respectively. When children wore trousers, long-sleeved shirts, briefs and socks at the same time, the reproductive risks exceeded acceptable level, although the carcinogenic risk of DEHP was low. Our results suggested that new clothing is an important route of phthalate exposure to preschool children. More research is required to investigate the contaminations and associated with risks in child clothing.

Determination of melamine and its derivatives in textiles and infant clothing purchased in the United States

Melamine-based resins are used extensively in fabrics to impart fire and heat resistance as well as wrinkle-free properties. Little is known, however, regarding the occurrence of melamine and its derivatives in textiles. In this study, concentrations of melamine, ammeline, ammelide, and cyanuric acid were determined in 77 textile samples and infant clothing purchased from Albany, New York, USA. All textile samples contained one or more target analytes, at concentration ranges of 1.19-81,800, 3.21-17,800, <1.20-25,700, and <0.50-550 ng/g for melamine, cyanuric acid, ammeline, and ammelide, respectively. Melamine was the predominant compound, accounting for 52% of the total concentrations of four analytes (i.e., ∑melamines). Significant positive correlations were found between the concentrations of melamine and its three derivatives (0.347 < r < 0.862, p < .01). The concentrations of ∑melamines were significantly higher in cotton fabrics (mean: 10,500 ng/g) and cotton clothes (10,200 ng/g) than in synthetic fabrics (1,380 ng/g) and socks (40.0 ng/g) (p < .01). Simulated laundry experiments suggested that a single round of washing with water removed 76-90% of melamine from clothing. The calculated dermal exposure doses of melamine and cyanuric acid were three to four orders of magnitude below the reference value. This study provides the first evidence of the occurrence of melamine derivatives in textiles and clothing purchased in the United States. CAPSULE: Melamine and cyanuric acid are widely distributed in textiles and infant clothing collected from the United States.

A sol-gel method for applying nanosized antibacterial particles to the surface of textile materials in an ultrasonic field

To prevent possible spread of nosocomial infections - HAI (Healthcare Acquired Infections) in healthcare facilities, Antibacterial textiles are developed. This carried out study has been conducted to assess the feasibility of the method of obtaining antibacterial coatings on textile materials. Specifically, the sol-gel method for synthesis of titanium dioxide nanoparticles in combination with zinc oxide nanoparticles from titanyl sulphate and zinc nitrate hexahydrate has been investigated. During the synthesis of titanium dioxide nanoparticles in combination with the zinc oxide nanoparticles, the coated textile material showed stable antibacterial properties with a suppression level ofEscherichia coliof more than 99.99%. The method has been tested on a semi-industrial scale in roll-to-roll experimentby applying homogenous coatings at a speed of 1,5 m per minute.

In vitro biocompatibility and biomechanics study of novel, Microscopy Aided Designed and ManufacturEd (MADAME) materials emulating natural tissue weaves and their intrinsic gradients

This study conducted biomechanical and biocompatibility tests of textiles and textile composites, created using recursive logic to emulate the properties of natural tissue weaves and their intrinsic mechanical stiffness gradients. Two sets of samples were created, first to test feasibility on textile samples designed as periosteum substitutes with elastane fibers mimicking periosteum's endogenous elastin and nylon fibers substituting for collagen, and then on composites comprising other combinations of suture materials before and after sterilization. In the first part, the bulk tensile mechanical stiffness of elastane-nylon textiles were tuned through respective fiber composition and orientation, i.e., aligned with and orthogonal to loading direction. Cell culture biocompatibility studies revealed no significant differences in proliferation rates of embryonic murine stem cells seeded on textiles compared to collagen membrane controls. Until the 15th day of culture, cells were rarely observed in direct contact with the elastane fibers, similar to previous observations with elastomeric sheets used in periosteum substitute implants. In the second part of the study textile samples were created from FDA-approved medical sutures comprising silk, expanded polytetrafluoroethylene, and polybutester. Biocompatibility and mechanical stiffness were assessed as a function of sterilization/disinfection mode (steam, ethylene oxide, and serial disinfection with ethanol). Cell proliferation rates did not differ significantly from controls, except for silk-suture containing textiles, which showed bacterial contamination and no viable cells after 15 days' culture for all sterilization methods. Sterilization had mixed (mostly not significant) effects on textile stiffness, except for the case of polybutester suture-based textiles that showed a significant increase in stiffness with ethylene oxide sterilization. In general, all textile combinations exhibited significantly higher stiffness than periosteum. Textiles comprising medical sutures of different stiffnesses arranged in engineered patterns offer a novel means to achieve mechanical gradients in medical device materials, emulating those of nature's own.

Environmentally benign non-wettable textile treatments: A review of recent state-of-the-art

Among superhydrophobic materials, non-wettable textiles are probably the ones that come in contact or interact with the human body most frequently. Hence, textile treatments for water or oil repellency should be non-toxic, biocompatible, and comply with stringent health standards. Moreover, considering the volume of the worldwide textile industry, these treatments should be scalable, sustainable, and eco-friendly. Due to this awareness, more and more non-wettable textile treatments with eco-friendly processes and green or non-toxic chemicals are being adopted and reported. Although fluorinated alkylsilanes or fluorinated polymers with C8 chemistry (with ≥ 8 fluorinated carbon atoms) are the best performing materials to render textiles water or oil repellent, they pose substantial health and environmental problems and are being banned. For this reason, water/solvent-borne, C8-free vehicles for non-wettable treatment formulations are probably the only ones that can have commercialization prospects. Hence, researchers have come up with a variety of new, non-toxic, green formulations and materials to render fabrics liquid repellent that constitute the focus of this review paper. As such, this review article discusses and summarizes recent developments and techniques on various sustainable superhydrophobic treatments for textiles, with comparable performance and durability to formulations based on fluorinated C8 compounds. The current state-of-the-art technologies, potential commercialization prospects, and relevant limitations are discussed and summarized with examples. The review also attempts to indicate promising future strategies and new materials that can transform the process for non-wettable textiles into an all-sustainable technology.

Microfiber release from different fabrics during washing

Microfiber is a subgroup of microplastics and accounts for a large proportion of microplastics in aquatic environment, especially in municipal effluents. The purpose of the present study was to quantify microfiber shedding from three most populate synthetic textile fabrics: polyester, polyamide, and acetate fabrics. The results showed that more microfibers were released after washing with a pulsator laundry machine than a platen laundry machine. The greatest number of microfibers was released from acetate fabric, which was up to 74,816 ± 10,656 microfibers/m² per wash, although microfibers were shed from all materials. Moreover, an increasing trend was found in the number of microfibers shedding from synthetic fabrics with the washing temperature increasing, and greater microfiber release occurred when washing fabrics with detergent rather than with water alone. The lint filter bag equipped with the pulsator laundry machine retained the longer microfibers (>1000 μm), but not the shorter microfibers (<500 μm) instead of releasing into the drainage system. Our data suggested that microfibers released during washing of synthetic fabrics may be an important source of microfibers in aquatic environment due to the increasing production and use of synthetic fabrics globally. Thus, more efficient filtering bags or other technologies in household washing machines should be developed to prevent and reduce the release of microfibers from domestic washing.

Microfibers generated from the laundering of cotton, rayon and polyester based fabrics and their aquatic biodegradation

The effect of fiber type (cotton, polyester, and rayon), temperature, and use of detergent on the number of microfibers released during laundering of knitted fabrics were studied during accelerated laboratory washing (Launder-Ometer) and home laundering experiments. Polyester and cellulose-based fabrics all shed significant amounts of microfibers and shedding levels were increased with higher water temperature and detergent use. Cellulose-based fabrics released more microfibers (0.2-4 mg/g fabric) during accelerated laundering than polyester (0.1-1 mg/g fabric). Using well-controlled aquatic biodegradation experiments it was shown that cotton and rayon microfibers are expected to degrade in natural aquatic aerobic environments whereas polyester microfibers are expected to persist in the environment for long periods of time.

Capturing microfibers - marketed technologies reduce microfiber emissions from washing machines

Microfibers are a common type of microplastic. One known source of microfibers to the environment is domestic laundering, which can release thousands of fibers into washing machine effluent with every wash. Here, we adapted existing methods to measure the length, count and weight of microfibers in laundry effluent. We used this method to test the efficacy of two technologies marketed to reduce microfiber emissions: the Cora Ball and Lint LUV-R filter. Both technologies significantly reduced the numbers of microfibers from fleece blankets in washing effluent. The Lint LUV-R captured an average of 87% of microfibers in the wash by count, compared to the Cora Ball which captured 26% by count. The Lint LUV-R also significantly reduced the total weight and average length of fibers in effluent. While further research is needed to understand other sources of microfiber emissions, these available technologies could be adopted to reduce emissions from laundering textiles.

An upper body garment with integrated sensors for people with neurological disorders - early development and evaluation

Background

In neurology and rehabilitation the primary interest for using wearables is to supplement traditional patient assessment and monitoring in hospital settings with continuous data collection at home and in community settings. The aim of this project was to develop a novel wearable garment with integrated sensors designed for continuous monitoring of physiological and movement related variables to evaluate progression, tailor treatments and improve diagnosis in epilepsy, Parkinson’s disease and stroke. In this paper the early development and evaluation of a prototype designed to monitor movements and heart rate is described. An iterative development process and evaluation of an upper body garment with integrated sensors included: identification of user needs, specification of technical and garment requirements, garment development and production as well as evaluation of garment design, functionality and usability. The project is a multidisciplinary collaboration with experts from medical, engineering, textile, and material science within the wearITmed consortium. The work was organized in regular meetings, task groups and hands-on workshops. User needs were identified using results from a mixed-methods systematic review, a focus group study and expert groups. Usability was evaluated in 19 individuals (13 controls, 6 patients with Parkinson’s disease) using semi-structured interviews and qualitative content analysis.

Results

The garment was well accepted by the users regarding design and comfort, although the users were cautious about the technology and suggested improvements. All electronic components passed a washability test. The most robust data was obtained from accelerometer and gyroscope sensors while the electrodes for heart rate registration were sensitive to motion artefacts. The algorithm development within the wearITmed consortium has shown promising results.

Conclusions

The prototype was accepted by the users. Technical improvements are needed, but preliminary data indicate that the garment has potential to be used as a tool for diagnosis and treatment selection and could provide added value for monitoring seizures in epilepsy, fluctuations in PD and activity levels in stroke. Future work aims to improve the prototype further, develop algorithms, and evaluate the functionality and usability in targeted patient groups. The potential of incorporating blood pressure and heart-rate variability monitoring will also be explored.

Turkey red textiles by non-destructive diffuse reflectance FTIR spectroscopy

This work investigates historical and replica Turkey red textiles with diffuse reflectance infrared (DRIFT) spectroscopy to study the coordination complex between cellulose, fatty acids, and the aluminium ions that form the basis of the colour lake. Turkey red was produced in Scotland for around 150 years, and is held in many museum and archive collections. The textile was renowned for its brilliant red hue, and for its fastness to light, washing, rubbing, and bleaching. This was attributed to its unusual preparatory process, the chemistry of which was never fully understood, that involved imbuing cotton with a solution of aqueous fatty acids and then aluminium in the following step. Here we show, for the first time, a characterisation of the Turkey red complex on replica and historical textiles. The development of techniques for non-destructive and in situ analysis of historical textiles is valuable for improving understanding of their chemistry, hopefully contributing to better conservation and display practices. The results show the fatty acids condense onto the cellulose polymer via hydrogen bonding between the CO and OH of the respective compounds, then the aluminium forms a bridging complex with the fatty acid carboxyl. This contributes to an improved understanding of Turkey red textiles, and shows the useful application of handheld diffuse FTIR instruments for heritage textile research.

Recent advances in chitosan polysaccharide and its derivatives in antimicrobial modification of textile materials

Chitosan is partially or completely N-deacetylated derivative of chitin and is chemically composed of β‑(1, 4) linked 2‑amino‑2‑deoxy‑β‑d‑glucopyranose. Biocompatibility, non-toxicity, antifungal activity, water-binding capacity, bioactivity and antimicrobial properties make chitosan particularly attractive substitute for synthetic polymers in different application fields and notably in the textile industry. The presence of reactive amino and hydroxyl groups along the backbone conifer chitosan some interesting properties for use in textile dyeing and finishing. However, the main barrier to the use of chitosan is the lack of water solubility at neutral pH and poor durability on textile surfaces. To overcome this, chitosan has been chemically modified in several ways to obtain a wide range of important derivatives with a broad range of applications. This review is intended to provide a recent overview of chitosan and its derivatives and highlight their role in the development of antimicrobial textiles.

Chemicals from textiles to skin: an in vitro permeation study of benzothiazole

Despite the possible impact on human health, few studies have been conducted to assess the penetration and accumulation of contaminants in the skin after a prolonged contact with textile materials. In previous studies, we have shown that benzothiazole and its derivatives, as well as other potentially hazardous chemicals, often are present as textile contaminants in clothes available on the retail market. Since benzothiazole is a common contaminant in clothes, these can be a possible route for human chemical exposure, both systemic and onto the skin. To investigate this potential exposure, Franz-type and flow-through cells were used for the permeation studies together with a Strat-M® artificial membranes. Experiments were performed using solutions of benzothiazole, as well as contaminated textile samples in the donor chamber. Benzothiazole was demonstrated to penetrate through, as well as being accumulated in the membrane mimicking the skin. After 24 h, up to 62% of benzothiazole was found in the acceptor cell, while up to 37% was found absorbed in the skin mimicking membrane. It also was shown that there was release and permeation from contaminated fabrics. The results indicate that benzothiazole can be released from textile materials, penetrate through the skin, and further enter the human body. This will possibly also apply to other chemical contaminants in textiles, and the results of this study indicate that the presence of these textile contaminants entails potential health risks. A rough risk assessment was made for clothing textiles according to Environmental Protection Agency (EPA) and European regulations for carcinogenic and non-carcinogenic compounds, using literature data for benzothiazole.