Non-animal protein hydrolysates from agro-industrial wastes: A prospect of alternative inputs for cultured meat

In light of the growing demand for alternative protein sources, laboratory-grown meat has been proposed as a potential solution to the challenges posed by conventional meat production. Cultured meat does not require animal slaughter and uses sustainable production methods, contributing to animal welfare, human health, and environmental sustainability. However, some challenges still need to be addressed in cultured meat production, such as the use of fetal bovine serum for medium supplementation. This ingredient has limited availability, increases production costs, and raises ethical concerns. This review explores the potential of non-animal protein hydrolysates derived from agro-industrial wastes as substitutes for critical components of fetal bovine serum in cultured meat production. Despite the lack of standardization of hydrolysate composition, the potential benefits of this alternative protein source may outweigh its disadvantages. Future research holds promise for increasing the accessibility of cultured meat.

Isolation and characterization of cellulase producing bacteria from forest, cow dung, Dashen brewery and agro-industrial waste

The continuous accumulation of waste, particularly from industries, often ends up in landfills. However, this waste can be transformed into a valuable resource through innovative methods. This process not only reduces environmental pollution but also generates additional useful products. This study aims to screen novel high-efficiency cellulose-degrading bacteria from cow dung, forest soil, brewery waste, and agro-industrial waste in the Debre Berhan area for the treatment of cellulose-rich agricultural waste. The serial dilution and pour plate method was used to screen for cellulolytic bacteria and further characterized using morphological and biochemical methods. From eleven isolates cow dung 1 (CD1), cow dung 6 (CD6) and cow dung (CD3) which produced the largest cellulolytic index (3.1, 2.9 and 2.87) were selected. Samples from forest soil, and spent grain didn't form a zone of clearance, and effluent treatment and industrial waste (IW9) shows the smallest cellulolytic index. Three potential isolates were then tested for cellulolytic activity, with cow dung 1 (CD1) displaying promising cellulase activity. These bacterial isolates were then identified as Bacillus species, which were isolated from cow dung 1 (CD1) with maximum cellulase production. Cow dung waste is a rich source of cellulase-producing bacteria, which can be valuable and innovative enzymes for converting lignocellulosic waste.

Valorisation of cotton post-industrial textile waste into lactic acid: chemo-mechanical pretreatment, separate hydrolysis and fermentation using engineered yeast

BACKGROUND

The textile industry has several negative impacts, mainly because it is based on a linear business model that depletes natural resources and produces excessive amounts of waste. Globally, about 75% of textile waste is disposed of in landfills and only 25% is reused or recycled, while less than 1% is recycled back into new garments. In this study, we explored the valorisation of cotton fabric waste from an apparel textile manufacturing company as valuable biomass to produce lactic acid, a versatile chemical building block.

RESULTS

Post-industrial cotton patches were pre-treated with the aim of developing a methodology applicable to the industrial site involved. First, a mechanical shredding machine reduced the fabric into individual fibres of maximum 35 mm in length. Afterwards, an alkaline treatment was performed, using NaOH at different concentrations, including a 16% (w/v) NaOH enriched waste stream from the mercerisation of cotton fabrics. The combination of chemo-mechanical pre-treatment and enzymatic hydrolysis led to the maximum recovery yield of 90.46 ± 3.46%, corresponding to 74.96 ± 2.76 g/L of glucose released, which represents a novel valorisation of two different side products (NaOH enriched wastewater and cotton textile waste) of the textile industry. The Saccharomyces cerevisiae strain CEN.PK m850, engineered for redirecting the natural alcoholic fermentation towards a homolactic fermentation, was then used to valorise the glucose-enriched hydrolysate into lactic acid. Overall, the process produced 53.04 g/L ± 0.34 of L-lactic acid, with a yield of 82.7%, being the first example of second-generation biomass valorised with this yeast strain, to the best of our knowledge. Remarkably, the fermentation performances were comparable with the ones obtained in the control medium.

CONCLUSION

This study validates the exploitation of cotton post-industrial waste as a possible feedstock for the production of commodity chemicals in microbial cell-based biorefineries. The presented strategy demonstrates the possibility of implementing a circular bioeconomy approach in manufacturing textile industries.

Water Extracts from Industrial Hemp Waste Inhibit the Adhesion and Development of Candida Biofilm and Showed Antioxidant Activity on HT-29 Colon Cancer Cells

The evolution of regulatory perspectives regarding the health and nutritional properties of industrial hemp-based products (Cannabis sativa L.) has pushed research to focus on the development of new methods for both the extraction and formulation of the bioactive compounds present in hemp extracts. While the psychoactive and medicinal properties of hemp-derived cannabinoid extracts are well known, much less has been investigated on the functional and antimicrobial properties of hemp extracts. Within the hemp value chain, various agricultural wastes and by-products are generated. These materials can be valorised through eco-innovations, ultimately promoting sustainable economic development. In this study, we explored the use of waste from industrial light cannabis production for the extraction of bioactive compounds without the addition of chemicals. The five extracts obtained were tested for their antimicrobial activity on both planktonic and sessile cells of pathogenic strains of the Candida albicans, Candida parapsilosis, and Candida tropicalis species and for their antioxidant activity on HT-29 colon cancer cells under oxidative stress. Our results demonstrated that these extracts display interesting properties both as antioxidants and in hindering the development of fungal biofilm, paving the way for further investigations into the sustainable valorisation of hemp waste for different biomedical applications.

Assessment of the mechanical and physical characteristics of PET bricks with different aggregates

Construction and demolition waste, along with discarded PET plastic bottles, have evolved into a widespread global resource. However, their current disposal in landfills poses a significant environmental pollution challenge. This research is centered on evaluating the performance of cement mortar composed by larger PET particles in conjunction with sand, construction and demolition waste, and lightweight expanded polystyrene aggregates. The primary objective of this study is to formulate a blend suitable for non-structural elements that can be easily manufactured for social housing construction. This modified blend extends upon the original certified mixture employed at CEVE for brick production, which encompasses cement and 3 mm-long PET particles. The experimental analysis revealed that blend containing 8 mm-long PET particles, in combination with fine aggregates of construction and demolition waste, attained a required mechanical strength of 2 MPa, while preserving the bulk density and hydric properties of the initial PET bricks developed at CEVE in Argentina.

Influence of industrial waste and mineral admixtures on durability and sustainability of high-performance concrete

The present research explores the strength, durability, microstructure, embodied energy, and global warming potential investigations made toward cleaner production of high-performance concrete (HPC) using a new composition. For this, various mixes were considered by replacing cement with metakaolin (MK) and silica fumes (SF) while simultaneously altering fine aggregates with industrial waste, copper slag (CS) in 0%, 25%, 50%, 75%, and 100% at 0.23 w/b ratio. The observations on fresh properties show a decrease in the slump due to pozzolans MK and SF but get compensated by the inclusion of copper slag simultaneously. HPC mixes with 50% replacement of CS revealed the best outcomes in compressive and splitting tensile strengths. Upon testing the concrete mixes against resistance to sulfate exposure, chloride penetration, and water absorption, the durability performance results best for modified mixes having 50% CS substitution levels. Scanning electron microscopy and energy dispersive spectroscopy support a 25% substitution of CS, showing a thickset microstructure with an ample amount of C-S-H gel with negligible cracks and capillary channels resulting in having best-strengthening properties. Overall, decrement in embodied energies and global warming potential has resulted with a reduction in the usage of cement and river sand in modified concrete mixes, ultimately making the production sustainable as well as environment friendly.

Analysis of the dynamics of common industrial solid waste based on input-output: A case study of Shanghai international metropolis in China

Rapid economic development inevitably leads to the discharge of a large amount of common industrial solid waste (CISW), which not only pollutes the environment but also restricts economic development in turn. In this study, a dynamic common industrial solid waste (DCISW) model is developed to analyze the retrospectively CISW development in Shanghai from 2000 to 2017 and simulate prospectively multi-perspective emission reduction measures. Specifically, the dynamic linkages between CISW and socio-economics are established at both the systematic and sectoral levels through input-output analysis, ecological network analysis, and related socio-economic indicators. Abatement measure simulations are conducted using RAS and other methods. The findings reveal that the growth of CISW in Shanghai is closely related to its fast-growing economy. The Others sector (OS) receives the most CISW from other sectors, while the Mining industry (MI) sends the most CISW to others. From production-based, consumption-based, and income-based perspectives, Chemical Products (CP) consistently remain the largest contributors. For the proposed waste generation intensity (WGI) indicator, the Mining industry (MI) is regarded as the main sector in all three perspectives. Moreover, the MI consistently emerges as the key sector of the system. CISW simulations indicate that improving the MI emission technology and increasing the MI output value will be top priorities for CISW emission reduction in Shanghai. This study is expected to provide scientific support to address the CISW problem in Shanghai and other similar fast-growing metropolises.

Unlocking Agronutrient Resources: Sorption Strategies for sugar-energy industry waste

Vinasse and ash from sugarcane bagasse (SCB) are key byproducts in the sugar-energy industry. Vinasse is nutrient-rich but environmentally challenging, while sugarcane bagasse ash (SCBA) offers excellent adsorbent for treating effluents. This work aims to assess the effectiveness of SCBA in removing nitrogen (N) and potassium (K) nutrients from Vinasse. Simulated standard solutions of K2SO4 and (NH4)2HPO4 were used to mimic the nutrient concentrations in Vinasse and optimize experimental parameters such as adsorbent mass and contact time. Kinetic and isotherm models were also applied to elucidate the underlying adsorption mechanisms. Structural, morphological, and thermal analyses revealed the micro-mesoporous and heterogeneous nature of SCBA, primarily composed of SiO2 (quartz and cristobalite). The sorption assessment indicated the ideal conditions involved lower SCBA masses (2.5 g) and 6 h of contact time for the simulated standard solutions. The replicated conditions for Vinasse (at an adjusted sorption time of 24 h) demonstrated nutrient sorption and pH correction of the Vinasse, attributed to the alkaline nature of SCBA. Analysis of the sorption kinetic models for K+ and NH4+ revealed that SCBA interacts diffusively with the environment, not necessarily controlled by adsorption on active sites, indicating non-uniform characteristics. The sorption isotherms for K+ and NH4+ showed the non-linearized Freundlich model was the most suitable, indicating the adsorption sites with varying energy levels and a multilayer sorption process. In conclusion, we successfully demonstrated the sorption of nutrients from Vinasse by SCBA, enhancing the value of these residues and mitigating their environmental impact when used in agricultural applications.

A novel complex coupling agent for enhancing the compatibility between collagen fiber and natural rubber: A utilization strategy for leather wastes

Leather shavings are generated as solid waste in the leather industry and may cause environmental pollution if not disposed judiciously. These solid wastes, primarily composed of collagen fibers (CFs), can be recycled as biomass composites. However, CFs are incompatible with natural rubber (NR) due to its hydrophilicity. Conventionally, the compatibility has been improved by utilizing silane coupling agents (SCAs) along with a large number of organic solvents, which further contribute to environmental pollution. In this study, we developed a novel complex coupling agent (CCA) to enhance the compatibility between CF and NR. The CCA was synthesized through a coordination reaction between Cr(III) and α-methacrylic acid (MAA). Cr(III) in the coupling agent coordinates with the active groups in CFs, while the unsaturated double bonds in MAA facilitate covalent crosslinking between the CCA and NR, improving compatibility. The coordination bonding between CF and NR exhibits strong interfacial interaction, endowing the composites with desirable mechanical properties. Moreover, the proposed method is an economical and green approach that can be used to synthesize CF-based composites without requiring organic solvents. Herein, a strategy promoted sustainable development in the leather industry has been established.

Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury

With the growing population, the accumulation of waste materials (WMs) (industrial/household waste) in the environment incessantly increases, affecting human health. Additionally, it affects the climate and ecosystem of terrestrial and water habitats, thereby needing effective management technology to control environmental pollution. In this aspect, managing these WMs to develop products that mitigate the associated issues is necessary. Researchers continue to focus on WMs management by adopting a circular economy. These WMs convert into useful/value-added products such as polymers and nanomaterials (NMs), especially carbon nanomaterials (CNs). The conversion/transformation of waste material into useful products is one of the best solutions for managing waste. Waste-derived CNs (WD-CNs) have established boundless promises for numerous applications like environmental remediation, energy, catalysts, sensors, and biomedical applications. This review paper discusses the several sources of waste material (agricultural, plastic, industrial, biomass, and other) transforming into WD-CNs, such as carbon nanotubes (CNTs), biochar, graphene, carbon nanofibers (CNFs), carbon dots, etc., are extensively elaborated and their application. The impact of metal doping within the WD-CNs is briefly discussed, along with their applicability to end applications.

Sustainable utilisation of calcium-rich industrial wastes in soil stabilisation: Potential use of calcium carbide residue

Calcium carbide residue (CCR), a by-product of the acetylene industry, is generated at a rate of 136 million tonnes per year, posing significant environmental risks. This review examines the potential utilisation of CCR in soil stabilisation, focusing on its stabilisation mechanism, performance in improving mechanical properties, environmental safety, and sustainability. The aim is to identify future research directions for CCR-based stabilisation to promote its broader application, and to provide references for managing similar Ca-rich wastes. CCR-based materials demonstrate promising benefits in enhancing various soil properties, such as uniaxial strength, swelling properties, triaxial shear behaviour, compressibility, and dynamic responses, while also reducing the mobility of contaminants. Compared to conventional stabilisers, CCR-based materials exhibit comparable performance in soil improvement, environmental impact and safety, and economic feasibility. However, further research is required to delve deeper into stabilisation mechanisms, mechanical properties, and stability of contaminants for the soil treated with CCR-based materials under diverse conditions.

Novel nano-fertilizers derived from drinking water industry waste for sustained release of macronutrients: performance, kinetics and sorption mechanisms

Nanotechnology has emerged as a promising approach for the controlled release of nutrients, particularly phosphorus and potassium. These essential plant nutrients are often applied in excess, leading to environmental pollution and loss of efficiency in crop production. Innovative economic and highly efficient fertilizers are urgently needed to achieve the targeted crop production worldwide in the presence of limited land and water resources. Therefore, in this study, novel, eco-friendly, cost-effective and enhanced efficiency nano-enabled fertilizers, NEF (nWTF1and nWTF2) were synthesized by impregnation of nanostructured water treatment residuals (nWTR) with (KH2PO4 + MgO) at 1:1 and 3:1 (w/w) ratios respectively using a planetary ball mill. The nWTR, nWTF1 and nWTF2 were extensively characterized. The water retention behavior and the sustained release of nutrients from the fabricated nano-enabled fertilizers (nWTF1 and nWTF2) in distilled water and sandy soil were investigated and monitored over time. The water retention capacity of the soil treated with nWTF2 after 26 days was 9.3 times higher than that of soil treated with conventional fertilizer. In addition, the nWTF2 exhibited lower release rates of P, K and Mg nutrients for longer release periods in comparison with the conventional fertilizers. This is a significant advantage over traditional fertilizers, which release nutrients quickly and can lead to leaching and nutrient loss. The main interaction mechanisms of PO4-K-Mg ions with nWTR surface were suggested. The results of the kinetics study revealed that power function was the best suitable model to describe the kinetics of P, K and Mg release data from NEF in water and soil. The produced NEF were applied to Zea maize plants and compared to commercial chemical fertilizer control plants. The obtained results revealed that the nano-enabled fertilizers (nWTF1 and nWTF2) significantly promoted growth, and P content compared with the commercial chemical fertilizer treated plants. The present work demonstrated the power of nano enabled fertilizers as efficient and sustained release nano-fertilizers for sustainable agriculture and pollution free environment.

Bioprocess to valorise fleshing produced in the tanning industry

This study focuses on circular bioeconomy and how to reduce the management of solid by-products in tannery facilities. To achieve this, double enzymatic hydrolysis has been developed, which allows the integrated management of both limed and fresh fleshing that are classified as category 3 animal by-products (ABPs). Fleshing has an average content of 15% fat, 20% protein and 65% water. To process these components independently, the fat fraction is separated from the protein and liquid protein fractions. This bioprocess has been developed from fleshing, yielding up to 78% mass recovery as biostimulants that are suitable for formulation and use in the fertiliser market. The efficacy of the protein fraction as a biostimulant was validated through laboratory tests, specifically by cabbage germination, which exhibited a notable improvement by 25%.

Organic waste-to-bioplastics: Conversion with eco-friendly technologies and approaches for sustainable environment

Petrochemical-based synthetic plastics poses a threat to humans, wildlife, marine life and the environment. Given the magnitude of eventual depletion of petrochemical sources and global environmental pollution caused by the manufacturing of synthetic plastics such as polyethylene (PET) and polypropylene (PP), it is essential to develop and adopt biopolymers as an environment friendly and cost-effective alternative to synthetic plastics. Research into bioplastics has been gaining traction as a way to create a more sustainable and eco-friendlier environment with a reduced environmental impact. Biodegradable bioplastics can have the same characteristics as traditional plastics while also offering additional benefits due to their low carbon footprint. Therefore, using organic waste from biological origin for bioplastic production not only reduces our reliance on edible feedstock but can also effectively assist with solid waste management. This review aims at providing an in-depth overview on recent developments in bioplastic-producing microorganisms, production procedures from various organic wastes using either pure or mixed microbial cultures (MMCs), microalgae, and chemical extraction methods. Low production yield and production costs are still the major bottlenecks to their deployment at industrial and commercial scale. However, their production and commercialization pose a significant challenge despite such potential. The major constraints are their production in small quantity, poor mechanical strength, lack of facilities and costly feed for industrial-scale production. This review further explores several methods for producing bioplastics with the aim of encouraging researchers and investors to explore ways to utilize these renewable resources in order to commercialize degradable bioplastics. Challenges, future prospects and Life cycle assessment of bioplastics are also highlighted. Utilizing a variety of bioplastics obtained from renewable and cost-effective sources (e.g., organic waste, agro-industrial waste, or microalgae) and determining the pertinent end-of-life option (e.g., composting or anaerobic digestion) may lead towards the right direction that assures the sustainable production of bioplastics.

Innovative applications of whey protein for sustainable dairy industry: Environmental and technological perspectives-A comprehensive review

Industrial waste management is critical to maintaining environmental sustainability. The dairy industry (DI), as one of the major consumers of freshwater, generates substantial whey dairy effluent, which is notably rich in organic matter and thus a significant pollutant. The effluent represents environmental risks due to its high biological and chemical oxygen demands. Today, stringent government regulations, environmental laws, and heightened consumer health awareness are compelling industries to responsibly manage and reuse whey waste. Therefore, this study investigates sustainable solutions for efficiently utilizing DI waste. Employing a systematic review approach, the research reveals that innovative technologies enable the creation of renewable, high-quality, value-added food products from dairy byproducts. These innovations offer promising sustainable waste management strategies for the dairy sector, aligning with economic interests. The main objectives of the study deal with, (a) assessing the environmental impact of dairy sector waste, (b) exploring the multifaceted nutritional and health benefits inherent in cheese whey, and (c) investigating diverse biotechnological approaches to fashion value-added, eco-friendly dairy whey-based products for potential integration into various food products, and thus fostering economic sustainability. Finally, the implications of this work span theoretical considerations, practical applications, and outline future research pathways crucial for advancing the sustainable management of dairy waste.

Get the win-win: Sustainable circular model of 'generation-value-technology' of industrial solid waste management

The management of industrial solid waste (ISW) and promoting sustainable circular development of the industrial economy is an urgent priority today. Therefore, this article constructs a sustainable circular model of 'generation-value-technology' of ISW management through the lens of industrial added value (IAV) and technology level. Also, the importance of the role of government is considered in the model. Based on actual data of China, this article simulates the future trend of the model using a system dynamics approach. The chief findings of the study are as follows: (1) under the current policy, China's future industrialization is increasing and the technological level of industrial enterprises is rising, but this is accompanied by a climb in ISW generation. (2) The win-win situation of ISW decrease and IAV increase can be achieved through enhanced information disclosure, technology innovation and government incentives. (3) Government subsidy should be oriented towards supporting technology innovation in industrial enterprises while reducing the proportion of incentives for ISW management results. Based on the results, this study proposes targeted policy implications for government and industrial enterprises.

Plant-based proteins from agro-industrial waste and by-products: Towards a more circular economy

There is a pressing need for affordable, abundant, and sustainable sources of proteins to address the rising nutrient demands of a growing global population. The food and agriculture sectors produce significant quantities of waste and by-products during the growing, harvesting, storing, transporting, and processing of raw materials. These waste and by-products can sometimes be converted into valuable protein-rich ingredients with excellent functional and nutritional attributes, thereby contributing to a more circular economy. This review critically assesses the potential for agro-industrial wastes and by-products to contribute to global protein requirements. Initially, we discuss the origins and molecular characteristics of plant proteins derived from agro-industrial waste and by-products. We then discuss the techno-functional attributes, extraction methods, and modification techniques that are applied to these plant proteins. Finally, challenges linked to the safety, allergenicity, anti-nutritional factors, digestibility, and sensory attributes of plant proteins derived from these sources are highlighted. The utilization of agro-industrial by-products and wastes as an economical, abundant, and sustainable protein source could contribute towards achieving the Sustainable Development Agenda's 2030 goal of a "zero hunger world", as well as mitigating fluctuations in food availability and prices, which have detrimental impacts on global food security and nutrition.

Synergistic effects of ternary mixture formulation and process parameters optimization in a sequential approach for enhanced L-asparaginase production using agro-industrial wastes

A novel ternary mixture of inexpensive and nutrient-rich agro-substrates comprising groundnut de-oiled cake, corn gluten meal, and soybean meal has been explored to enhance the L-asparaginase production in solid-state fermentation. To achieve the aim, a hybrid strategy was implemented by utilizing a combination of a mixture design and artificial neural networks. The study initiated with the judicious selection of the agro-substrates based on their low C/N content in comparison to the control using the CHNS elemental analysis. The mixture composition of soybean meal (49.0%), groundnut de-oiled cake (31.5%), and corn gluten meal (19.5%) were found optimum using the simplex lattice mixture design. The agro-industrial substrates mix revealed synergistic effects on the L-asparaginase production than either of the substrates alone. The maximum L-asparaginase activity of 141.45 ± 5.24 IU/gds was observed under the physical process conditions of 70% moisture content, autoclaving period of 30 min and 6.0 pH by adopting the machine learning-derived artificial neural network (ANN) methodology. The ANN modeling showed excellent prediction ability with a low mean squared error of 0.7, a low root mean squared error of 0.84, and a high value of 0.99 for regression coefficient. Moisture content (%) was assessed to be the most sensitive process parameter in the global sensitivity analysis. The net outcome from the two sequential optimization designs is the selection of the ideal mixture composition followed by the optimum physical process parameters. The application of the enzyme demonstrated significant cytotoxicity against leukemia cell line and therefore exhibited an anti-cancer effect. The present study reports a novel mixture combination and methodology that can be used to lower the cost and enhance the production of L-asparaginase using an agro-industrial substrate mixture.

Resource utilization of stone waste and loess to prepare grouting materials

Loess, a terrestrial clastic sediment, is formed essentially by the accumulation of wind-blown dust, while stone waste (SW) is an industrial waste produced during stone machining. Utilising loess and SW to prepare environmentally-friendly supplementary cementitious materials can not only address environmental issues caused by solid waste landfills but also meet the demand of reinforcement of coal-seam floor aquifer for grouting materials. In this paper, the effects of the loess/SW mass ratio and calcination temperature on the transformation of calcined products are investigated and their pozzolanic activities are evaluated. The workability, environmental impact and cost of grouting materials based on cement and calcined products are also assessed. Experimental results reveal that higher temperatures favour the formation of free lime and periclase, which tend to be involved in solid-state reactions. Higher temperature and loess/SW mass ratio strengthens the diffraction peaks of dodecalcium hepta-aluminate (C12A7), dicalcium ferrite (C2F) and dicalcium silicate (C2S). The clay minerals in loess become completely dehydroxylated before 825 °C, generating amorphous SiO2 and Al2O3. Covalent Si-O bonds are interrupted and that disordered silicate networks are generated in the calcined products, which is confirmed by the increased strength of the Si29 resonance region at -60 ppm to -80 ppm. Although co-calcined loess and SW contain the most four-fold aluminium at 950 °C, recrystallisation depresses the pozzolanic activity. Hence, the loess/SW sample designated LS2-825 exhibits the better hydration activity. Additionally, grouting materials composed of cement and LS2-825 exhibit good setting times, fluidity, strength and a low carbon footprint in practical engineering applications, and they also provide the additional benefit of being cost effective.

A mechanistic mathematical model for the treatment of synthetic oil-field wastewater (produced water) by electrocoagulation process using aluminium electrodes

Produced water (PW) is the largest by-product that comes out of the oil wells during oil and gas (O&G) field exploration. PW contains high-salt concentration along with other organic and inorganic components; therefore, PW must be treated before disposal. Electrocoagulation (EC) is an effective treatment method to remove pollutants from PW which has been the focus of many experimental studies; however, a mathematical model specifically for PW treatment by EC has not been developed yet. In this work, a comprehensive mathematical model has been developed to elucidate the role of EC operating parameters on the PW treatment performance and determine the mechanism for COD (Chemical Oxygen Demand) removal. The present model considers and identifies the dominant Al-hydroxy complex species and their contribution to the COD removal from synthetic PW samples by estimating their rate constants and comparing their magnitudes and investigates multi-scale modelling of the EC reactor. The influence of working parameters such as current density, initial pH, interelectrode distance, mixing speed and solution volume of PW on Al coagulant production and COD removal was investigated and modelled. The study estimates the rate constants of the reactions taking place for COD removal by EC process and by comparing their magnitudes identifies the dominant reactions and coagulant species involved in the process. The mathematical model prediction of COD removal fits well with the experimental data at 10 mA cm-2, 15 mA cm-2 and 20 mA cm-2 current density with R2 value of 0.96, 0.97 and 0.92, respectively and for dissolved Al concentration R2 value of 0.96, 0.99, and 0.97, respectively. The simulated results reproduced a good fit at initial pH of 6.1, 7.3 and 8.6 with R2 value of 0.92, 0.96 and 0.98, respectively for COD removal. The mathematical model and the experimental results showed the role of dominant Al-hydroxy complex species such asAl OH 2 + ,Al OH 2 + , Al OH 3 ,Al 2 OH 2 + 4 andAl OH 4 - in controlling the COD removal process. Under different operating conditions considered in the study, the model also predicted the COD removal performance of the EC reactors at different reactor volumes with R2 value of 0.96 for higher solution volume and larger reactor. The model presented and rate constants determined in the study will provide a theoretical basis for designing, scaling up and operating the EC reactor for oil-field PW treatment.

Unlocking the potential of biosurfactants: Production, applications, market challenges, and opportunities for agro-industrial waste valorization

Biosurfactants are eco-friendly compounds with unique properties and promising potential as sustainable alternatives to chemical surfactants. The current review explores the multifaceted nature of biosurfactant production and applications, highlighting key fermentative parameters and microorganisms able to convert carbon-containing sources into biosurfactants. A spotlight is given on biosurfactants' obstacles in the global market, focusing on production costs and the challenges of large-scale synthesis. Innovative approaches to valorizing agro-industrial waste were discussed, documenting the utilization of lignocellulosic waste, food waste, oily waste, and agro-industrial wastewater in the segment. This strategy strongly contributes to large-scale, cost-effective, and environmentally friendly biosurfactant production, while the recent advances in waste valorization pave the way for a sustainable society.

Assessment of the state of vegetation cover of recultivated dumps of uranium deposits in Northern Kazakhstan

The purpose of this study was to assess the processes of plant community formation on recultivated dumps of spent uranium-containing industrial waste from uranium deposit mines, as well as to identify the degree of impact of agro-climatic factors, agrochemical indicators of soils of recultivated dumps, and the level of residual ionizing radiation on the productivity of the emerging vegetation cover. Studies of plant colonization of recultivated Grachevsky and Shantobinsky uranium mine dumps located in Northern Kazakhstan were carried out. The mining and technical stage of reclamation consisted of planning a dump with slopes of 15° and covering it with a 1 m layer of chestnut soil. In total, 30-35 plant species are present in the dumps, the projective coverage is approximately the same (56.6-70.0%), and the herbage density is 15-16.6 plants/100 m2. As a result of the measures taken to recultivate the dumps, the intensity of the background ionizing radiation at the Grachevsky mine dump was in the range of 25-35 µR/hr and at the Shantobinsky mine dump 10-25 µR/hr, which indicates compliance with safety standards. The plant species which can be used for artificial plant colonization of uranium-containing waste dumps, were identified.

Genetic characterization of a novel Salinicola salarius isolate applied for the bioconversion of agro-industrial wastes into polyhydroxybutyrate

BACKGROUND

Polyhydroxybutyrate (PHB) has emerged as a promising eco-friendly alternative to traditional petrochemical-based plastics. In the present study, we isolated and characterized a new strain of Salinicola salarius, a halophilic bacterium, from the New Suez Canal in Egypt and characterized exclusively as a potential PHB producer. Further genome analysis of the isolated strain, ES021, was conducted to identify and elucidate the genes involved in PHB production.

RESULTS

Different PHB-producing marine bacteria were isolated from the New Suez Canal and characterized as PHB producers. Among the 17 bacterial isolates, Salinicola salarius ES021 strain showed the capability to accumulate the highest amount of PHB. Whole genome analysis was implemented to identify the PHB-related genes in Salinicola salarius ES021 strain. Putative genes were identified that can function as phaCAB genes to produce PHB in this strain. These genes include fadA, fabG, and P3W43_16340 (encoding acyl-CoA thioesterase II) for PHB production from glucose. Additionally, phaJ and fadB were identified as key genes involved in PHB production from fatty acids. Optimization of environmental factors such as shaking rate and incubation temperature, resulted in the highest PHB productivity when growing Salinicola salarius ES021 strain at 30°C on a shaker incubator (110 rpm) for 48 h. To maximize PHB production economically, different raw materials i.e., salted whey and sugarcane molasses were examined as cost-effective carbon sources. The PHB productivity increased two-fold (13.34 g/L) when using molasses (5% sucrose) as a fermentation media. This molasses medium was used to upscale PHB production in a 20 L stirred-tank bioreactor yielding a biomass of 25.12 g/L, and PHB of 12.88 g/L. Furthermore, the produced polymer was confirmed as PHB using Fourier-transform infrared spectroscopy (FTIR), gas chromatography-mass spectroscopy (GC-MS), and nuclear magnetic resonance spectroscopy (NMR) analyses.

CONCLUSIONS

Herein, Salinicola salarius ES021 strain was demonstrated as a robust natural producer of PHB from agro-industrial wastes. The detailed genome characterization of the ES021 strain presented in this study identifies potential PHB-related genes. However, further metabolic engineering is warranted to confirm the gene networks required for PHB production in this strain. Overall, this study contributes to the development of sustainable and cost-effective PHB production strategies.

Industrial waste-based adsorbents as a new trend for removal of water-borne emerging contaminants

Emerging contaminants in wastewater are one of the growing concerns because of their adverse effects on human health and ecosystems. Adsorption technology offers superior performance due to its cost-effectiveness, stability, recyclability, and reliability in maintaining environmental and health standards for toxic pollutants. Despite extensive research on the use of traditional adsorbents to remove emerging contaminants, their expensiveness, lack of selectivity, and complexity of regeneration remain some of the challenges. Industrial wastes viz. blast furnace slag, red mud, and copper slag can be used to develop efficacious adsorbents for the treatment of emerging contaminants in water. Advantages of the use of such industrial wastes include resource utilization, availability, cost-effectiveness, and waste management. Nevertheless, little is known so far about their application, removal efficacy, adsorption mechanisms, and limitations in the treatment of emerging contaminants. A holistic understanding of the application of such unique industrial waste-derived adsorbents in removing emerging contaminants from water is need of the hour to transform this technology from bench-scale to pilot and large-scale applications. This review investigates different water treatment techniques associated with industrial waste-based adsorbents derived from blast furnace slag, red mud, and copper slag. Besides, this review provides important insights into the growing trends of utilizing such novel types of adsorbents to remove emerging contaminants from water with an emphasis on removal efficacy, controlling measures, adsorption mechanisms, advantages, and limitations. The present timely review brings the current state of knowledge into a single reference which could be a strong platform for future research in understanding the latest advancements, decision making, and financial management related to the treatment of wastewater using industrial waste-based adsorbents.

Pulp-paper industry sludge waste biorefinery for sustainable energy and value-added products development: A systematic valorization towards waste management

The pulp-paper industry is one of the main industrial sectors that produce massive amounts of residual sludge, constituting an enormous environmental burden for the industries. Traditional sludge management practices, such as landfilling and incineration, are restricted due to mounting environmental pressures, complex regulatory frameworks, land availability, high costs, and public opinion. Valorization of pulp-paper industry sludge (PPS) to produce high-value products is a promising substitute for traditional sludge management practices, promoting their reuse and recycling. Valorization of PPIS for biorefinery beneficiation includes biomethane, biohydrogen, bioethanol, biobutanol, and biodiesel production for renewable energy generation. Additionally, the various thermo-chemical technologies can be utilized to synthesize bio-oil, hydrochar, biochar, adsorbent, and activated carbon, signifying potential for value-added generation. Moreover, PPIS can be recycled as a byproduct by incorporating it into nanocomposites, cardboard, and construction materials development. This paper aims to deliver a comprehensive overview of PPIS management approaches and thermo-chemical technologies utilized for the development of platform chemicals in industry. Substitute uses of PPIS, such as making building materials, developing supercapacitors, and making cardboard, are also discussed. In addition, this article deeply discusses recent developments in biotechnologies for valorizing PPIS to yield an array of valuable products, such as biofuels, lactic acids, cellulose, nanocellulose, and so on. This review serves as a roadmap for future research endeavors in the effective handling of PPIS.

Phosphorus removal from urban wastewater through adsorption using biogenic calcium carbonate

Phosphorus (P) removal from urban wastewater is increasingly relevant in the wastewater treatment sector. The present work aims to contribute to the study of the adsorption process as a P removal technology. Biogenic calcium carbonate from industrial eggshell waste prepared by milling and calcination was used as an adsorbent. Batch adsorption experiments were conducted using real wastewater with 40 mg P/L (orthophosphate), original pH 7.33, under stirring conditions (100 rpm). The adsorbent was characterized using SEM-EDS, XRD, and FTIR-ATR before and after adsorption. From an initial screening of calcination times (15, 30, 60, and 120 min) and considering a balance between P removal and energy saving, the adsorbent selected was eggshell calcined at 700 °C for 60 min. The Langmuir isotherms describe the experimental data with a maximum adsorption capacity of 4.57 mg P/g at 25 °C. The adsorption process reached equilibrium within 120 min for different dosages (5, 10, and 20 g/L at 25 °C). Batch experiments showed that SO42-, at a concentration of 2689 mg/L reduced the P adsorption selectivity for dosages ≤10 g/L at 25 °C. Characterization of the loaded adsorbent shows that P adsorption from real wastewater is mostly electrostatic attraction, with the contribution of ligand exchange and microprecipitation. The adsorption capacity and behavior of the selected adsorbent seem promising for P removal from urban wastewater compared with other low-cost adsorbents.

Long-term evaluation of palm oil mill effluent (POME) steam reforming over lanthanum-based perovskite oxides

To replace the obsolete ponding system, palm oil mill effluent (POME) steam reforming (SR) over net-acidic LaNiO3 and net-basic LaCoO3 were proposed as the POME primary treatments, with promising H2-rich syngas production. Herein, the long-term evaluation of POME SR was scrutinized with both catalysts under the optimal conditions (600 °C, 0.09 mL POME/min, 0.3 g catalyst, & 74-105 μm catalyst particle size) to examine the catalyst microstructure changes, transient process stability, and final effluent evaluation. Extensive characterization proved the (i) adsorption of POME vapour on catalysts before SR, (ii) deposition of carbon and minerals on spent SR catalysts, and (iii) dominance of coking deactivation over sintering deactivation at 600 °C. Despite its longer run, spent LaCoO3 (50.54 wt%) had similar carbon deposition with spent LaNiO3 (50.44 wt%), concurring with its excellent coke resistance. Spent LaCoO3 (6.12 wt%; large protruding crystals) suffered a harsher mineral deposition than spent LaNiO3 (3.71 wt%; thin film coating), confirming that lower reactivity increased residence time of reactants. Transient syngas evolution of both SR catalysts was relatively steady up to 4 h but perturbed by coking deactivation thereafter. La2O2CO3 acted as an intermediate species that hastened the coke removal via reverse Boudouard reaction upon its decarbonation. La2O2CO3 decarbonation occurred continuously in LaCoO3 system but intermittently in LaNiO3 system. LaNiO3 system only lasted for 13 h as its compact ash blocked the gas flow. LaCoO3 system lasted longer (17 h) with its porous ash, but it eventually failed because KCl crystallites blocked its active sites. Relatively, LaCoO3 system offered greater net H2 production (72.78%) and POME treatment volume (30.77%) than LaNiO3 system. SR could attain appreciable POME degradation (>97% COD, BOD5, TSS, & colour intensity). Withal, SR-treated POME should be polished to further reduce its incompliant COD and BOD5.

A multi-stakeholder digital platform for regional construction and demolition waste management

Little attention has been paid to the interaction or synergy among construction and demolition (C&D) waste management stakeholders. A framework allowing for interaction among the various C&D waste players is especially important in regions with mature C&D waste infrastructure, where various recycling, reuse and disposal facilities are present. In such an expanded infrastructure, these facilities differ in terms of the C&D waste materials they accept, the nature of the waste accepted (sorted/unsorted), as well as the services they provide. This makes developing the optimal C&D waste management plan (WMP) more cumbersome for contractors. To address the challenges arising from the poor dynamics associated with the overarching waste management infrastructure, this paper proposes a novel digital platform, namely the 'Construction and Demolition Waste Management Kernel' (C&D WMK). The C&D WMK has three main objectives: it allows for data exchange between the different stakeholders, provides guidance to contractors when developing C&D WMPs and allows for governmental supervision and regulation. This paper introduces the concept behind the C&D WMK, presents the optimization model embedded in the system, and demonstrates its application in a case study leveraging real-world data. Finally, a scenario analysis is conducted to show how the C&D WMK can be used by governments to identify pitfalls in the state of practice at the regional scale, and to determine effective solutions to enhance the C&D waste management performance.

The development of an integrated BIM-based visual demolition waste management planning system for sustainability-oriented decision-making

In light of the suboptimal resource efficiency persisting in current demolition waste management (DWM) practices caused by inattentive and profit-driven decision-making due to the lack of tailored stringent legislation, monetary incentives, and benchmarking frameworks, this study aims to facilitate sustainability-oriented decision-making at the demolition planning stage. A practical Building Information Modelling (BIM)-based visual DWM planning system is designed, wherein the system seamlessly accommodates inventory analysis and Multi-Criteria Decision-Aiding (MCDA) algorithms into various interconnected modules. Moreover, this research proposes bespoke algorithms and colour coding schemes to quantify and visualise the recycling value of building components for augmenting the visual guidance of sustainable building design and selective demolition planning. Furthermore, a pilot case study demonstrates the system's applicability in a real-world demolition project. The findings unveil that improving the recycling rate substantially offsets carbon emissions and demolition waste disposal expenditures. The increment in beneficial impacts outweighs the additional energy consumption and costs for implementing sustainable DWM strategies based on the predefined geographical settings. This BIM-based system reforms the conventional demolition planning and DWM decision-making workflow by tackling technical barriers concerning data richness, interoperability, and result interpretation. It equips the users with intuitive visual design guidance and parallel scenario analysis when crafting sustainability-oriented DWM schemes. In summary, this research contributes to familiarising industry practitioners with sustainable DWM schematic design and circular economy principles. Moreover, it prompts the development of customised BIM libraries as repositories for updating and capitalising on DWM-related information that can be adapted to different regional contexts.

Synergistic improvements in energy recovery and bio-oil quality through integrated thermochemical valorization of agro-industrial waste of varying moisture content

Two thermochemical valorization schemes were investigated for co-upgrading dry and wet agricultural wastes through integrated hydrothermal carbonization (HTC) and pyrolysis. In the first pathway, dry and wet wastes were co-carbonized. The resulting hydrochar was pyrolyzed to yield an energy dense biochar (26-32 MJ/kg) high in fixed carbon (41-86 wt%) and low in volatile matter (6-12 wt%). The resulting bio-oil was lower in carboxylic acids and higher in phenols than predicted based on an additive scheme. In pathway two, wet waste (only) underwent HTC and the resulting hydrochar was mixed with dry waste and the mixture pyrolyzed. This pathway showed a lower biochar yield (32-67 wt%) and lower HHV values (24-31 MJ/kg) but higher fixed carbon content (65-84 wt%). The bio-oil contained more carboxylic acids than pathway 1 bio-oil. Pathway 1 biochars were more thermally reactive than pathway 2 biochars, reflecting a synergistic deoxygenation that occurs when incorporating dry waste in HTC prior to pyrolysis.

Enhanced ethanol production from paper sludge waste under high-solids conditions with industrial and cellulase-producing strains of Saccharomyces cerevisiae

Reported ethanol titres from hydrolysis-fermentation of the degraded fibres in paper sludge (PS) waste, generally obtained under fed-batch submerged conditions, can be improved through fermentation processes at high solids loadings, as demonstrated in the present study with two industrial PS wastes at enzyme dosages appropriate for solids loadings up to 40% (w/w). The industrial yeast,Saccharomyces cerevisiaestrain Ethanol Red®, was compared to two genetically engineeredS. cerevisiaestrains, namely Cellusec® 1.0 and Cellusec® 2.0, capable of xylose utilisation, and xylose utilisation and cellulase production, respectively. High-solids batch fermentations were conducted in 3 L horizontal rotating reactors and ethanol titres of 100.8 and 73.3 g/L were obtained for virgin pulp and corrugated recycle PS, respectively, at 40% (w/w) solids loading using Ethanol Red®. Xylose utilisation by Cellusec® 1.0 improved ethanol titres by up to 10.3%, while exogenous cellulolytic enzyme requirements were reduced by up to 50% using cellulase-producing Cellusec® 2.0.

Application of the novel manta-ray foraging algorithm to optimize acidic peptidase production in solid-state fermentation using binary agro-industrial waste

Peptidases, which constitute about 20% of the global enzyme market, have found applications in detergent, food and pharmaceutical industries, and could be produced on a large scale using low-cost agro-industrial waste. An acidophilic Bacillus cereus strain produced acidic peptidase on binary-agro-industrial waste comprising yam peels and fish processing waste at pH 4.5 with high catalytic activity. A five-variable central composite rotatable design of a response surface methodology was used to model bioprocess conditions for improved peptidase production in solid-state fermentation. Data generated was leveraged as the basis for applying the novel Manta-ray foraging optimization-linked feed-forward artificial neural network to predict bioprocess conditions optimally. Results obtained from the optimization experiments revealed a significant coefficient of determination of 0.9885 with low-performance error. The bioprocess predicted a peptidase activity of 1035.32 U/mL under optimized conditions set as 54.8 g/100 g yam peels, 23.85 g/100 g fish waste, 0.31 g/100 g CaCl2, 47.54% (v/w) moisture content, and pH 2. Peptidase activity was improved 5-fold, and was stable for 240 min between pH 2.5 and 3.5. Michaelis-Menten kinetics revealed a Km of 0.119 mM and a catalytic efficiency of 45462.19 mM-1 min-1. The bioprocess holds promise for sustainable enzyme-driven applications.

Development of innovative antioxidant food packaging systems based on natural extracts from food industry waste and Moringa oleifera leaves

Active packaging that prolongs food shelf life, maintaining its quality and safety, is an increasing industrial demand, especially if integrated in a circular economy model. In this study, the fabrication and characterization of sustainable cellulose-based active packaging using food-industry waste and natural extracts as antioxidant agents was assessed. Grape marc, olive pomace and moringa leaf extracts obtained by supercritical fluid, antisolvent and maceration extraction in different solvents were compared for their antioxidant power and phenolic content. Grape and moringa macerates in acetone and methanol, as the most efficient and cost-effective extracts, were incorporated in the packaging as coatings or in-between layers. Both systems showed significant free-radical protection in vitro (antioxidant power 50%) and more than 50% prevention of ground beef lipid peroxidation over 16 days by indirect TBARS and direct in situ Raman microspectroscopy measurements. Therefore, these systems are promising for industrial applications and more sustainable farm-to-fork food production systems.

New orphan disease therapies from the proteome of industrial plasma processing waste- a treatment for aceruloplasminemia

Plasma-derived therapeutic proteins are produced through an industrial fractionation process where proteins are purified from individual intermediates, some of which remain unused and are discarded. Relatively few plasma-derived proteins are exploited clinically, with most of available plasma being directed towards the manufacture of immunoglobulin and albumin. Although the plasma proteome provides opportunities to develop novel protein replacement therapies, particularly for rare diseases, the high cost of plasma together with small patient populations impact negatively on the development of plasma-derived orphan drugs. Enabling therapeutics development from unused plasma fractionation intermediates would therefore constitute a substantial innovation. To this objective, we characterized the proteome of unused plasma fractionation intermediates and prioritized proteins for their potential as new candidate therapies for human disease. We selected ceruloplasmin, a plasma ferroxidase, as a potential therapy for aceruloplasminemia, an adult-onset ultra-rare neurological disease caused by iron accumulation as a result of ceruloplasmin mutations. Intraperitoneally administered ceruloplasmin, purified from an unused plasma fractionation intermediate, was able to prevent neurological, hepatic and hematological phenotypes in ceruloplasmin-deficient mice. These data demonstrate the feasibility of transforming industrial waste plasma fraction into a raw material for manufacturing of new candidate proteins for replacement therapies, optimizing plasma use and reducing waste generation.

Marine Animal Co-Products-How Improving Their Use as Rich Sources of Health-Promoting Lipids Can Foster Sustainability

Marine lipids are recognized for their-health promoting features, mainly for being the primary sources of omega-3 fatty acids, and are therefore critical for human nutrition in an age when the global supply for these nutrients is experiencing an unprecedent pressure due to an ever-increasing demand. The seafood industry originates a considerable yield of co-products worldwide that, while already explored for other purposes, remain mostly undervalued as sustainable sources of healthy lipids, often being explored for low-value oil production. These co-products are especially appealing as lipid sources since, besides the well-known nutritional upside of marine animal fat, which is particularly rich in omega-3 polyunsaturated fatty acids, they also have interesting bioactive properties, which may garner them further interest, not only as food, but also for other high-end applications. Besides the added value that these co-products may represent as valuable lipid sources, there is also the obvious ecological upside of reducing seafood industry waste. In this sense, repurposing these bioresources will contribute to a more sustainable use of marine animal food, reducing the strain on already heavily depleted seafood stocks. Therefore, untapping the potential of marine animal co-products as valuable lipid sources aligns with both health and environmental goals by guaranteeing additional sources of healthy lipids and promoting more eco-conscious practices.

Source-oriented risk assessment of heavy metal(loid)s in agricultural soils around a multimetal smelting area near the Yellow River, China

Heavy metal(loid) (HM) contamination in agricultural soils, particularly in areas severely impacted by smelting industries, has attracted worldwide attention. In this study, agricultural soils were collected in a flourishing multimetal smelting area near the Yellow River in central China. By an integrated approach encompassing the positive matrix factorization model, ordinary kriging interpolation and hierarchical clustering analysis (PMF-OK-HC), a total of four major sources and their mass contributions were identified, namely, soil parent material (56.6%), industrial waste and Mo smelting (24.0%), metal smelting and traffic emissions (12.8%), and coal combustion (6.7%). On this basis, the health risk of HMs was evaluated by Monte Carlo simulations and showed that a higher risk, with a higher proportion of exceeding-thresholds risk, was observed for children than for adults in terms of both noncarcinogenic and carcinogenic risks. Exposure pathways of oral ingestion in children could result in a higher attributed risk than other pathways. Furthermore, source-oriented risk assessment (SORA) revealed that the sources of coal combustion, industrial waste and Mo smelting had the highest contributions to noncarcinogenic and carcinogenic risks. Overall, for effective environmental management in agricultural soil, the framework of SORA was verified as an effective tool in the identification of the priority control of HMs and their sources.

Membrane-based technology in water and resources recovery from the perspective of water social circulation: A review

In this review, the application of membrane-based technology in water social circulation was summarized. Water social circulation encompassed the entire process from the acquirement to discharge of water from natural environment for human living and development. The focus of this review was primarily on the membrane-based technology in recovery of water and other valuable resources such as mineral ions, nitrogen and phosphorus. The main text was divided into four main sections according to water flow in the social circulation: drinking water treatment, agricultural utilization, industrial waste recycling, and urban wastewater reuse. In drinking water treatment, the acquirement of water resources was of the most importance. Pressure-driven membranes, such as ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) were considered suitable in natural surface water treatment. Additionally, electrodialysis (ED) and membrane capacitive deionization (MCDI) were also effective in brackish water desalination. Agriculture required abundant water with relative low quality for irrigation. Therefore, the recovery of water from other stages of the social circulation has become a reasonable solution. Membrane bioreactor (MBR) was a typical technique attributed to low-toxicity effluent. In industrial waste reuse, the osmosis membranes (FO and PRO) were utilized due to the complex physical and chemical properties of industrial wastewater. Especially, membrane distillation (MD) might be promising when the wastewater was preheated. Resources recovery in urban wastewater was mainly divided into recovery of bioenergy (via anaerobic membrane bioreactors, AnMBR), nitrogen (utilizing MD and gas-permeable membrane), and phosphorus (through MBR with chemical precipitation). Furthermore, hybrid/integrated systems with membranes as the core component enhanced their performance and long-term working ability in utilization. Generally, concentrate management and energy consumption control might be the key areas for future advancements of membrane-based technology.

A comprehensive review of biosurfactant production and its uses in the pharmaceutical industry

Biosurfactants are naturally occurring, surface-active chemicals generated by microorganisms and have attracted interest recently because of their numerous industrial uses. Compared to their chemical equivalents, they exhibit qualities that include lower toxic levels, increased biodegradable properties, and unique physiochemical properties. Due to these traits, biosurfactants have become attractive substitutes for synthetic surfactants in the pharmaceutical industry. In-depth research has been done in the last few decades, demonstrating their vast use in various industries. This review article includes a thorough description of the various types of biosurfactants and their production processes. The production process discussed here is from oil-contaminated waste, agro-industrial waste, dairy, and sugar industry waste, and also how biosurfactants can be produced from animal fat. Various purification methods such as ultrafiltration, liquid-liquid extraction, acid precipitation, foam fraction, and adsorption are required to acquire a purified product, which is necessary in the pharmaceutical industry, are also discussed here. Alternative ways for large-scale production of biosurfactants using different statistical experimental designs such as CCD, ANN, and RSM are described here. Several uses of biosurfactants, including drug delivery systems, antibacterial and antifungal agents, wound healing, and cancer therapy, are discussed. Additionally, in this review, the future challenges and aspects of biosurfactant utilization in the pharmaceutical industry and how to overcome them are also discussed.

Valorization of food industrial waste: Green synthesis of carbon quantum dots and novel applications

Food analysis is a key element in monitoring food quality for risk assessment concerning public health. Instead of using chemically prepared carbon sources for food analysis, eco-friendly and green technology based CQDs are in great demand due to their least toxicity. Carbon quantum dots (CQDs) represent an innovative group of fluorescent nanomaterials, possessing characteristics like photoluminescence, minimal toxicity, high water solubility, and a strong affinity for biocompatibility. Their versatility extends to various applications in fields like sensor technology, biomedicine, and photocatalysis, among other areas. This paper reviews the current challenges related to the use of food by-products as a source of carbon not only enhances the value of waste but also facilitates food safety detection. The integration of CQDs into food technology for food safety analysis shows a great impact on the economy and environment. Furthermore, the details of synthesis, toxicity, application, and characterization of CQDs were also described along with a brief conceptual overview. Particularly, the detection of food additives, food-borne pathogens, heavy metal ions, and pesticide residues was also elaborated. Furthermore, the advantages and the drawbacks are also discussed, with an emphasis on their future prospects in this emerging research field. This review concluded that the use of food residual components has been associated with several toxic effects and accumulation of these residues leads to many disorders like cancer, neurological disorder, reproductive disease, cardiovascular and arthritis. Moreover, the carbon source produced from food waste interacted with other functional groups like oxygen, hydrogen, and nitrogen through π- π* and n- π* interactions. Overall, understanding the mechanism of fluorescence quenching of residual components is of great interest in the field of food detection, as it can provide insights into the design of cost-effective fluorescence probes with low toxicity.

Optimization of enzymatic saccharification of industrial wastes using a thermostable and halotolerant endoglucanase through Box-Behnken experimental design

This study describes the production, characterization and application of an endoglucanase from Penicillium roqueforti using lignocellulosic agro-industrial wastes as the substrate during solid-state fermentation. The endoglucanase was generated after culturing with different agro-industrial wastes for 96 h without any pretreatment. The highest activity was obtained at 50 °C and pH 4.0. Additionally, the enzyme showed stability in the temperature and pH ranges of 40-80 °C and 4.0-5.0, respectively. The addition of Ca2+, Zn2+, Mg2+, and Cu2+ increased enzymatic activity. Halotolerance as a characteristic of the enzyme was confirmed when its activity increased by 35% on addition of 2 M NaCl. The endoglucanase saccharified sugarcane bagasse, coconut shell, wheat bran, cocoa fruit shell, and cocoa seed husk. The Box-Behnken design was employed to optimize fermentable sugar production by evaluating the following parameters: time, substrate, and enzyme concentration. Under ideal conditions, 253.19 mg/g of fermentable sugars were obtained following the saccharification of wheat bran, which is 41.5 times higher than that obtained without optimizing. This study presents a thermostable, halotolerant endoglucanase that is resistant to metal ions and organic solvents with the potential to be applied in producing fermentable sugars for manufacturing biofuels from agro-industrial wastes.

Effect of ozonation and UV-LED combination on simultaneous removal of toxic elements during electrocoagulation

Cyanide and heavy metals pose significant risks as contaminants in certain industrial effluents. This study aims to concurrently eliminate cyanide and specific heavy metals from synthetic wastewater resembling gold processing effluent, employing an improved electrocoagulation method incorporating ozone and UV-LED. The investigation delves into the effects of pH, electrode type, current density, reaction time, and ozonation. The findings revealed notable removal efficiencies: 98% for cyanide, 76% for nickel, 85% for copper, and 84% for zinc when utilizing a stainless steel electrode as the cathode. Optimal removal rates were achieved at 94% for cyanide, 93% for copper, 92% for zinc, and 83% for nickel, employing the UV-LED-ozone technique with an ozonation flow rate of 4 mg/s at pH = 10. Notably, when Al-Gr-SS-Fe electrodes and a current of 15 mA/cm2 were applied, these removal efficiencies were observed. Therefore, the most favorable conditions for the concurrent removal of pollutants from synthetic wastewater involved maintaining a pH of 10, utilizing SS-Fe as anode and Al-Gr as cathode electrodes, and employing a current density of 15 mA/cm2. The addition of ozonation with a flow rate of 4 mg/s, along with UV-LED, further enhanced the removal process. In summary, it can be inferred that the enhanced electrocoagulation method outperformed conventional electrocoagulation, leading to increased elimination of cyanide and selected heavy metals.

Stabilization of metal and metalloids from contaminated soils using magnesia-based tundish deskulling waste from continuous steel casting

This study presents a groundbreaking exploration into the potential use of refractory tundish deskulling waste (TUN), a magnesium oxide-based by-product from continuous steel casting, as a stabilizing agent for remediating metal and metalloids contaminated soils. Up-flow column horizontal percolation tests were conducted to measure the concentrations of metals and metalloids, pH, and electrical conductivity (EC) in the leachates of two different combinations of contaminated soil and stabilizer (95-5 wt% and 90-10 wt%). The effectiveness of TUN as a soil-stabilizing agent for contaminated soils with metals and metalloids was evaluated by comparing its leachates with those obtained from a sample of a well-established low-grade magnesium oxide (LG-MgO) by-product, which underwent the same testing procedure. The findings revealed a significant correlation between the mobility of the examined metals and metalloids, and the water-soluble or acid phase of the contaminated soil, primarily governed by precipitation-solution reactions. While the stabilizing impact on non-pH-dependent metals, particularly redox-sensitive oxyanions, was less pronounced, both MgO-based stabilizers exhibited a favourable influence on soil pH-dependent metals and metalloids. They achieved this by establishing an optimal pH range of approximately 9.0-10.5, wherein the solubility of metal (hydr)oxides is minimized. Notably, metals like Zn and Cu, which have high leaching potential, experienced a remarkable reduction in leaching - Zn by over 99% and Cu by around 97% - regardless of the stabilizer content. In a broader context, this research champions the principles of the circular economy by offering a technical remedy for treating soils contaminated with pH-dependent metals and metalloids. The proposed solution harnesses industrial waste - currently relegated to landfills - as a resource, aligning with sustainable practices and environmental responsibility.

Enhancing industrial swine slaughterhouse wastewater treatment: Optimization of electrocoagulation technique and operating mode

In this study, industrial swine slaughterhouse effluents were treated by an electrocoagulation process (EC) with aluminum and iron electrodes. Batch and semicontinuous operation were performed. EC tests were carried out in batch operating mode for 2.5 h using fixed current densities (j = 10, 20, and 30 mA cm-2) in sulfate and chloride media. At the laboratory scale, higher TOC removal efficiencies were observed using aluminum electrodes at 20 mA cm-2 without the addition of a supporting electrolyte (82.7%). However, the EC process with Fe electrodes consumed 43.6% less energy. After the best operating parameters were found at the laboratory scale, the process was tested as a semicontinuous prepilot process using a filter-press FM01-LC-type electrochemical reactor equipped with flat plate aluminum electrodes. In this stage, current densities and mean linear flow rates were assessed. The highest TOC removal efficiency of 72.7% (i.e., residual TOC concentration of 85.18 mg L-1) in the semicontinuous process was achieved by the application of j = 25 mA cm-2 and ur = 0.64 cm s-1 with an energy consumption of 19.80 kW h m-3. The residual COD and TP concentrations met the international standard limits. Moreover, complete decoloration and disinfection were accomplished. EDXRF, SEM, EDAX, XRD, and FTIR analyses indicated that pollutants were removed by adsorption on aluminum/iron hydroxides/oxyhydroxides.

Bacterial tolerance and detoxification of cyanide, arsenic and heavy metals: Holistic approaches applied to bioremediation of industrial complex wastes

Cyanide is a highly toxic compound that is found in wastewaters generated from different industrial activities, such as mining or jewellery. These residues usually contain high concentrations of other toxic pollutants like arsenic and heavy metals that may form different complexes with cyanide. To develop bioremediation strategies, it is necessary to know the metabolic processes involved in the tolerance and detoxification of these pollutants, but most of the current studies are focused on the characterization of the microbial responses to each one of these environmental hazards individually, and the effect of co-contaminated wastes on microbial metabolism has been hardly addressed. This work summarizes the main strategies developed by bacteria to alleviate the effects of cyanide, arsenic and heavy metals, analysing interactions among these toxic chemicals. Additionally, it is discussed the role of systems biology and synthetic biology as tools for the development of bioremediation strategies of complex industrial wastes and co-contaminated sites, emphasizing the importance and progress derived from meta-omic studies.

Valorising pasta industry wastes by the scale up and integration of solid-state and liquid-submerged fermentations

Pasta waste has previously been studied in a process to obtain lactic acid through a sequential hydrolysis and fermentation. The process was improved by using enzymes produced via solid-state fermentation of wheat bran in shake flasks. However, the scale-up of the solid-state fermentation is a complex task. In this study, amylase was produced in a home-designed tray bioreactor which allowed to carry out the hydrolysis and fermentation steps at the pilot scale. Due to the efficiency of the solid-state fermentation and the activity of the enzyme, only a small amount (100 g) of wheat bran was required to achieve high yields in a hydrolysis in a 72 L bioreactor (50 L working volume). Overall, the lactic acid yield was 0.68 gLA/gdS, and after the purification, the lactic acid recovered was 55 %, with a total ion concentration of 500 mg/L and an enantiomeric purity of 98.1 % L-LA.

Combustion of high-calorific industrial waste in conventional brick kilns: An emerging source of PFAS emissions to agricultural soils

The brick kilns in the South Asian region are widely documented to partially combust high-calorific waste components of synthetic-industrial origin, which contain hazardous constituents, including per- and polyfluoroalkyl substances (PFAS). Correspondingly, these establishments are necessarily built on agricultural land to easily acquire clay by excavating soil horizons, thus making cultivation soils vulnerable to PFAS contaminations. In this pioneering study, the occurrence, distribution profile, traceability and human health risk exposure to forty-four legacy and novel PFAS homologues, including two ultrashort-chain (C2-C3) PFAS, were investigated in agricultural soils around thirty-two conventional brick kilns across three districts of Pakistan. ⅀44PFAS concentrations ranged from 14.3 to 465 ng/g (median: 28.2 ng/g), which were 2 to 70 folds higher than those in background soils, and slightly higher than those reported in agricultural soils in the global literature. The highest occurrence was observed for PFAS alternatives, i.e., 6:2 fluorotelomer sulfonate (6:2 FTSA) (40 %) and 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) (4.5 %). A significant positive correlation (p < 0.01) was observed among the concentrations of short-chain perfluoroalkyl acids (C4-C7) and novel PFOS substitutes, implying their origin from common sources. Furthermore, ultrashort-chain and short-chain perfluorocarboxylic acids (PFCA) (89 %) and perfluorosulfonic acids (PFSA) (63 %) dominated over long-chain's PFCA (11 %) and PFSA (37 %), respectively. The estimated daily intake to children exposed in surrounding inhabited communities, at 95th percentile concentrations was found to be approaching the European tolerable daily intake limit of 0.63 ng/kg bw/day. Therefore, the brick manufacturing industry is identified as a novel source of PFAS in the adjacent environment and for residents. This suggests the need for further investigations to elucidate the origin of emerging contaminants in the waste streams of the region to safeguard ecological integrity.

Persulfate activation using leonardite char-supported nano zero-valent iron composites for styrene-contaminated soil and water remediation

Effective in-situ technology to treat carcinogenic compounds in contaminated areas poses a major challenge. Our objective was to load nano-zero-valent iron (nZVI) onto leonardite char (LNDC), an alternative carbon source from industrial waste, for use as a persulfate (PS) activator for styrene treatment in soil and water. By adding a surfactant during synthesis, cetyltrimethylammonium bromide (CTAB) promotes a flower-like morphology and the nZVI formation in smaller sizes. Results showed that nZVI plays a crucial role in PS activation in both homogeneous and heterogeneous reactions to generate reactive oxygen species (ROS), which can remove 98% of styrene within 20 min. Quenching experiments indicated that singlet oxygen (1O2), superoxide radicals (O2•-), and sulfate radicals (SO4•-) were the main species working together to degrade styrene. XPS analysis also revealed a role of surface oxygen-containing groups (i.e., CO, C-OH) in activating PS for SO4•- and 1O2 generation. The possible reaction mechanism of PS activation by LNDC-CTAB-nZVI composite and factors affecting treatment efficiency (i.e., PS concentration, catalyst dosage, pH, and humic acid) were illustrated. The molarity/molality ratio of PS to nZVI should be set greater than 1 for effective styrene removal. GC-MS analysis showed that styrene was degraded to a less toxic benzaldehyde intermediate. However, the excessive use of PS and catalysts can harm plant growth, requiring a combining approach to achieve safer use for real applications. Overall results supported the use of the LNDC-CTAB-nZVI/PS system as an efficient in-situ treatment technology for soil and water remediation.

Bacillus genus industrial applications and innovation: First steps towards a circular bioeconomy

In recent decades, environmental concerns have directed several policies, investments, and production processes. The search for sustainable and eco-friendly strategies is constantly increasing to reduce petrochemical product utilization, fossil fuel pollution, waste generation, and other major ecological impacts. The concepts of circular economy, bioeconomy, and biorefinery are increasingly being applied to solve or reduce those problems, directing us towards a greener future. Within the biotechnology field, the Bacillus genus of bacteria presents extremely versatile microorganisms capable of producing a great variety of products with little to no dependency on petrochemicals. They are able to grow in different agro-industrial wastes and extreme conditions, resulting in healthy and environmentally friendly products, such as foods, feeds, probiotics, plant growth promoters, biocides, enzymes, and bioactive compounds. The objective of this review was to compile the variety of products that can be produced with Bacillus cells, using the concepts of biorefinery and circular economy as the scope to search for greener alternatives to each production method and providing market and bioeconomy ideas of global production. Although the genus is extensively used in industry, little information is available on its large-scale production, and there is little current data regarding bioeconomy and circular economy parameters for the bacteria. Therefore, as this work gathers several products' economic, production, and environmentally friendly use information, it can be addressed as one of the first steps towards those sustainable strategies. Additionally, an extensive patent search was conducted, focusing on products that contain or are produced by the Bacillus genus, providing an indication of global technology development and direction of the bacteria products. The Bacillus global market represented at least $18 billion in 2020, taking into account only the products addressed in this article, and at least 650 patent documents submitted per year since 2017, indicating this market's extreme importance. The data we provide in this article can be used as a base for further studies in bioeconomy and circular economy and show the genus is a promising candidate for a greener and more sustainable future.

Contamination and source-specific health risk assessment of polycyclic aromatic hydrocarbons in soil from a mega iron and steel site in China

The iron and steel industry has always been a key and difficult point of environmental pollution control. In the present study, 493, 175, 153, 72, and 42 soil samples were collected from the soil depths of 0-0.5, 0.5-2, 2-3, 3-4, and 4-5 m (herein called the layers) of the Shougang Steel site, respectively. Compared with the evaluation criteria, the Shougang Steel surface soil was severely polluted by polycyclic aromatic hydrocarbons (PAHs). Inverse distance-weighted interpolation and the Kruskal-Wallis H test revealed that the soil PAH pollution in the iron-making area, especially the coking area, was severer than those in other areas. The PAH concentrations first decreased, and then, increased with the increase of depth. With the increase in depth, the contributions of 2- and 3-ring PAHs increased, while those of 4-, 5-, and 6-ring PAHs decreased. The bivariate local indicators of spatial association (LISA) analysis was used to identify the areas prone to soil PAH pollution due to atmospheric deposition of industrial waste gas and traffic emissions. The method could be used to analyze the impact of anthropogenic activities on soil's PAH pollution for other contaminated sites. Three main pollution sources of soil PAHs, the backfill source, the combustion of coal, and the traffic emissions, were identified based upon three diagnostic ratios, positive matrix factorization and the bivariate LISA analysis, and accounted for 53.8%, 23.5%, and 22.7%, respectively. The combination of bivariate LISA analysis and other source analysis methods could improve the accuracy of source analysis. Benzo[a]pyrene contributed the most to the total health risk among sixteen PAHs. The health risks related to the three pollution sources decreased in the order of backfill sources > coal combustion > traffic emissions. The incremental life-time carcinogenic risks were all below 10-4, indicating negligible or acceptable risks.

Synergistic utilization of industrial waste red mud and rice husk ash for eco-friendly geopolymer preparation: enhancing strength and mitigating hazardous leaching

The prolonged stacking of substantial volumes of industrial waste red mud (RM) can have significantly hazardous effects on the environment. In order to address this critical problem, this study proposes the synergistic preparation of geopolymers utilizing RM in conjunction with another industrial waste, rice husk ash (RHA). Geopolymers with varying incorporation of RHA were prepared using sodium hydroxide and sodium silicate composite alkaline activator. The mechanical properties, microstructure, and environmental characteristics of geopolymers were investigated. The incorporation of RHA significantly enhanced the strength of RM-based geopolymers, with the highest strength of 25.40 MPa achieved at 40% incorporation. According to XRD patterns and FTIR spectra, C-(A)-S-H and N-(A)-S-H were generated during the geopolymerization, thereby enhancing the strength of geopolymers. From SEM micrographs of geopolymers, it was evident that the geopolymer matrix was constituted by the encapsulation of unreacted inert particles of RM and residual fragments of RHA with C-(A)-S-H and N-(A)-S-H. The leaching levels of trace elements and heavy metals in geopolymers are both below the regulatory thresholds, thereby effectively mitigating the presence of hazardous substances in raw materials. These findings proved that the reuse of RM and RHA for the synergistic preparation of environmentally friendly geopolymers is a promising approach to address the issue of substantial RM stacking.