Locally resonant sonic materials

Broadband Acoustic Hyperbolic Metamaterial

In this Letter, we report on the design and experimental characterization of a broadband acoustic hyperbolic metamaterial. The proposed metamaterial consists of multiple arrays of clamped thin plates facing the y direction and is shown to yield opposite signs of effective density in the x and y directions below a certain cutoff frequency, therefore, yielding a hyperbolic dispersion. Partial focusing and subwavelength imaging are experimentally demonstrated at frequencies between 1.0 and 2.5 kHz. The proposed metamaterial could open up new possibilities for acoustic wave manipulation and may find usage in medical imaging and nondestructive testing.

Bio-inspired heterogeneous composites for broadband vibration mitigation

Structural biological materials have developed heterogeneous and hierarchical architectures that are responsible for the outstanding performance to provide protection against environmental threats including static and dynamic loading. Inspired by this observation, this research aims to develop new material and structural concepts for broadband vibration mitigation. The proposed composite materials possess a two-layered heterogeneous architecture where both layers consist of high-volume platelet-shape reinforcements and low-volume matrix, similar to the well-known "brick and mortar" microstructure of biological composites. Using finite element method, we numerically demonstrated that broadband wave attenuation zones can be achieved by tailoring the geometric features of the heterogeneous architecture. We reveal that the resulting broadband attenuation zones are gained by directly superimposing the attenuation zones in each constituent layer. This mechanism is further confirmed by the investigation into the phonon dispersion relation of each layer. Importantly, the broadband wave attenuation capability will be maintained when the mineral platelet orientation is locally manipulated, yet a contrast between the mineral platelet concentrations of the two constituent layers is essential. The findings of this work will provide new opportunities to design heterogeneous composites for broadband vibration mitigation and impact resistance under mechanically challenging environmental conditions.

Three-dimensional collimated self-accelerating beam through acoustic metascreen

We report the generation of three-dimensional acoustic collimated self-accelerating beam in non-paraxial region with sourceless metascreen. Acoustic metascreen with deep subwavelength spatial resolution, composed of hybrid structures combining four Helmholtz resonators and a straight pipe, transmitting sound efficiently and shifting fully the local phase is evidenced. With an extra phase profile provided by the metascreen, the transmitted sound can be tuned to propagate along arbitrary caustic curvatures to form a focused spot. Due to the caustic nature, the formed beam possesses the capacities of bypassing obstacles and holding the self-healing feature, paving then a new way for wave manipulations and indicating various potential applications, especially in the fields of ultrasonic imaging, diagnosis and treatment.

Soft resonator of omnidirectional resonance for acoustic metamaterials with a negative bulk modulus

Monopolar resonance is of fundamental importance in the acoustic field. Here, we present the realization of a monopolar resonance that goes beyond the concept of Helmholtz resonators. The balloon-like soft resonator (SR) oscillates omnidirectionally and radiates from all parts of its spherical surface, eliminating the need for a hard wall for the cavity and baffle effects. For airborne sound, such a low-modulus resonator can be made extremely lightweight. Deep subwavelength resonance is achieved when the SR is tuned by adjusting the shell thickness, benefiting from the large density contrast between the shell material and the encapsulated gas. The SR resonates with near-perfect monopole symmetry, as demonstrated by the theoretical and experimental results, which are in excellent agreement. For a lattice of SRs, a band gap occurs and blocks near-total transmission, and the effective bulk modulus exhibits a prominent negative band, while the effective mass density remains unchanged. Our study shows that the SR is suitable for building 3D acoustic metamaterials and provides a basis for constructing left-handed materials as a new means of creating a negative bulk modulus.

Viscous-to-viscoelastic transition in phononic crystal and metamaterial band structures

The dispersive behavior of phononic crystals and locally resonant metamaterials is influenced by the type and degree of damping in the unit cell. Dissipation arising from viscoelastic damping is influenced by the past history of motion because the elastic component of the damping mechanism adds a storage capacity. Following a state-space framework, a Bloch eigenvalue problem incorporating general viscoelastic damping based on the Zener model is constructed. In this approach, the conventional Kelvin-Voigt viscous-damping model is recovered as a special case. In a continuous fashion, the influence of the elastic component of the damping mechanism on the band structure of both a phononic crystal and a metamaterial is examined. While viscous damping generally narrows a band gap, the hereditary nature of the viscoelastic conditions reverses this behavior. In the limit of vanishing heredity, the transition between the two regimes is analyzed. The presented theory also allows increases in modal dissipation enhancement (metadamping) to be quantified as the type of damping transitions from viscoelastic to viscous. In conclusion, it is shown that engineering the dissipation allows one to control the dispersion (large versus small band gaps) and, conversely, engineering the dispersion affects the degree of dissipation (high or low metadamping).

Elastic Waves Scattering without Conversion in Metamaterials with Simultaneous Zero Indices for Longitudinal and Transverse Waves

We theoretically investigate elastic waves propagating in metamaterials with simultaneous zero indices for both the longitudinal and transverse waves. With scattering objects (here cylinders) present in the metamaterial slabs, while the elastic waves can mostly transmit through the metamaterial slabs perfectly, exhibiting the well-known cloaking effect of zero-index metamaterials, they nevertheless become totally blocked at resonances, indicating strong elastic wave scattering by the objects in the cases. However, despite the occurrence of the elastic wave scattering, there is, counterintuitively, no mode conversion between the longitudinal and transverse waves in the process, completely in contrast to that in conventional elastic media. A design of a two-dimensional phononic crystal with these peculiar properties is presented.

Ultra-sparse metasurface for high reflection of low-frequency sound based on artificial Mie resonances

Acoustic metamaterials offer great flexibility for manipulating sound waves and promise unprecedented functionality, ranging from transformation acoustics, super-resolution imaging to acoustic cloaking. However, the design of acoustic metamaterials with exciting functionality remains challenging with traditional approaches using classic acoustic elements such as Helmholtz resonators and membranes. Here we demonstrate an ultraslow-fluid-like particle with intense artificial Mie resonances for low-frequency airborne sound. Eigenstate analysis and effective parameter retrieval show two individual negative bands in the single-size unit cell, one of which exhibits a negative bulk modulus supported by the monopolar Mie resonance, whereas the other exhibits a negative mass density induced by the dipolar Mie resonance. The unique single-negative nature is used to develop an ultra-sparse subwavelength metasurface with high reflectance for low-frequency sound. We demonstrate a 0.15λ-thick, 15%-filling ratio metasurface with an insertion loss over 93.4%. The designed Mie resonators provide diverse routes to construct novel acoustic devices with versatile applications.

Negative refractive index and acoustic superlens from multiple scattering in single negative metamaterials

Metamaterials, man-made composite media structured on a scale much smaller than a wavelength, offer surprising possibilities for engineering the propagation of waves. One of the most interesting of these is the ability to achieve superlensing--that is, to focus or image beyond the diffraction limit. This originates from the left-handed behavior--the property of refracting waves negatively--that is typical of negative index metamaterials. Yet reaching this goal requires the design of 'double negative' metamaterials, which act simultaneously on the permittivity and permeability in electromagnetics, or on the density and compressibility in acoustics; this generally implies the use of two different kinds of building blocks or specific particles presenting multiple overlapping resonances. Such a requirement limits the applicability of double negative metamaterials, and has, for example, hampered any demonstration of subwavelength focusing using left-handed acoustic metamaterials. Here we show that these strict conditions can be largely relaxed by relying on media that consist of only one type of single resonant unit cell. Specifically, we show with a simple yet general semi-analytical model that judiciously breaking the symmetry of a single negative metamaterial is sufficient to turn it into a double negative one. We then demonstrate that this occurs solely because of multiple scattering of waves off the metamaterial resonant elements, a phenomenon often disregarded in these media owing to their subwavelength patterning. We apply our approach to acoustics and verify through numerical simulations that it allows the realization of negative index acoustic metamaterials based on Helmholtz resonators only. Finally, we demonstrate the operation of a negative index acoustic superlens, achieving subwavelength focusing and imaging with spot width and resolution 7 and 3.5 times better than the diffraction limit, respectively. Our findings have profound implications for the physics of metamaterials, highlighting the role of their subwavelength crystalline structure, and hence entering the realm of metamaterial crystals. This widens the scope of possibilities for designing composite media with novel properties in a much simpler way than has been possible so far.

A new class of tunable hypersonic phononic crystals based on polymer-tethered colloids

The design and engineering of hybrid materials exhibiting tailored phononic band gaps are fundamentally relevant to innovative material technologies in areas ranging from acoustics to thermo-optic devices. Phononic hybridization gaps, originating from the anti-crossing between local resonant and propagating modes, have attracted particular interest because of their relative robustness to structural disorder and the associated benefit to 'manufacturability'. Although hybridization gap materials are well known, their economic fabrication and efficient control of the gap frequency have remained elusive because of the limited property variability and expensive fabrication methodologies. Here we report a new strategy to realize hybridization gap materials by harnessing the 'anisotropic elasticity' across the particle-polymer interface in densely polymer-tethered colloidal particles. Theoretical and Brillouin scattering analysis confirm both the robustness to disorder and the tunability of the resulting hybridization gap and provide guidelines for the economic synthesis of new materials with deliberately controlled gap position and width frequencies.

Topological Phononic Crystals with One-Way Elastic Edge Waves

We report a new type of phononic crystals with topologically nontrivial band gaps for both longitudinal and transverse polarizations, resulting in protected one-way elastic edge waves. In our design, gyroscopic inertial effects are used to break the time-reversal symmetry and realize the phononic analogue of the electronic quantum (anomalous) Hall effect. We investigate the response of both hexagonal and square gyroscopic lattices and observe bulk Chern numbers of 1 and 2, indicating that these structures support single and multimode edge elastic waves immune to backscattering. These robust one-way phononic waveguides could potentially lead to the design of a novel class of surface wave devices that are widely used in electronics, telecommunication, and acoustic imaging.

Symmetry issues in the hybridization of multi-mode waves with resonators: an example with Lamb waves metamaterial

Locally resonant metamaterials derive their effective properties from hybridization between their resonant unit cells and the incoming wave. This phenomenon is well understood in the case of plane waves that propagate in media where the unit cell respects the symmetry of the incident field. However, in many systems, several modes with orthogonal symmetries can coexist at a given frequency, while the resonant unit cells themselves can have asymmetric scattering cross-sections. In this paper we are interested in the influence of symmetry breaking on the hybridization of a wave field that includes multiple propagative modes. The A₀ and S₀ Lamb waves that propagate in a thin plate are good candidates for this study, as they are either anti-symmetric or symmetric. First we designed an experimental setup with an asymmetric metamaterial made of long rods glued to one side of a metallic plate. We show that the flexural resonances of the rods induce a break of the orthogonality between the A₀/S₀ modes of the free-plate. Finally, based on numerical simulations we show that the orthogonality is preserved in the case of a symmetric metamaterial leading to the presence of two independent polariton curves in the dispersion relation.

PHYSICS. Observation of phononic helical edge states in a mechanical topological insulator

A topological insulator, as originally proposed for electrons governed by quantum mechanics, is characterized by a dichotomy between the interior and the edge of a finite system: The bulk has an energy gap, and the edges sustain excitations traversing this gap. However, it has remained an open question whether the same physics can be observed for systems obeying Newton's equations of motion. We conducted experiments to characterize the collective behavior of mechanical oscillators exhibiting the phenomenology of the quantum spin Hall effect. The phononic edge modes are shown to be helical, and we demonstrate their topological protection via the stability of the edge states against imperfections. Our results may enable the design of topological acoustic metamaterials that can capitalize on the stability of the surface phonons as reliable wave guides.

Causality and passivity in elastodynamics

What are the constraints placed on the constitutive tensors of elastodynamics by the requirements that the linear elastodynamic system under consideration be both causal (effects succeed causes) and passive (system does not produce energy)? The analogous question has been tackled in other areas but in the case of elastodynamics its treatment is complicated by the higher order tensorial nature of its constitutive relations. In this paper, we clarify the effect of these constraints on highly general forms of the elastodynamic constitutive relations. We show that the satisfaction of passivity (and causality) directly requires that the hermitian parts of the transforms (Fourier and Laplace) of the time derivatives of the constitutive tensors be positive semi-definite. Additionally, the conditions require that the non-hermitian parts of the Fourier transforms of the constitutive tensors be positive semi-definite for positive values of frequency. When major symmetries are assumed these definiteness relations apply simply to the real and imaginary parts of the relevant tensors. For diagonal and one-dimensional problems, these positive semi-definiteness relationships reduce to simple inequality relations over the real and imaginary parts, as they should. Finally, we extend the results to highly general constitutive relations which include the Willis inhomogeneous relations as a special case.

Acoustic transmission enhancement through a soft interlayer with a reactance boundary

Research has shown that acoustic transmission enhancement (ATE) can occur in stiff materials with high acoustic impedance that include a soft interlayer with low acoustic impedance inserted between them without any opening (i.e., without any links between the two stiff materials). Previously, ATE was induced either by coupling acoustic surface waves or Love waves with the Fabry-Perot resonant modes inside the apertures or by the locally resonant modes of the structure. However, in this article ATE is achieved using wave-vector redistribution induced by a reactance boundary. An optimal boundary was designed to adjust the wave vector in the propagation direction, decreasing reflection caused by impedance differences. The role of boundary conditions on ATE was also clarified.

Theoretical requirements for broadband perfect absorption of acoustic waves by ultra-thin elastic meta-films

We derive and numerically demonstrate that perfect absorption of elastic waves can be achieved in two types of ultra-thin elastic meta-films: one requires a large value of almost pure imaginary effective mass density and a free space boundary, while the other requires a small value of almost pure imaginary effective modulus and a hard wall boundary. When the pure imaginary density or modulus exhibits certain frequency dispersions, the perfect absorption effect becomes broadband, even in the low frequency regime. Through a model analysis, we find that such almost pure imaginary effective mass density with required dispersion for perfect absorption can be achieved by elastic metamaterials with large damping. Our work provides a feasible approach to realize broadband perfect absorption of elastic waves in ultra-thin films.

Nonlinear energy channeling in the two-dimensional, locally resonant, unit-cell model. II. Low energy excitations and unidirectional energy transport

This paper completes a series of two publications devoted to the analytical investigation of energy channeling phenomena, emerging in a locally resonant unit-cell model. The system under consideration comprises an outer mass with internal rotator and subject to the 2D nonlinear local potential. In the present study, we focus on the analysis of the regimes of two-dimensional, nonlinear energy transport forming in the special asymptotic limit of low energy excitations. Unlike the previously considered case, this limit can also be characterized by the absence of resonant interactions between the internal rotator and the motion of an outer element. In the considered limit, we report the emergence of all new, highly nonlinear, transient regimes of unidirectional energy channeling. This phenomenon is manifested by partial and complete targeted energy flow from axial to lateral vibrations, controlled by an internal device. Here, we also show that regimes corresponding to the bidirectional energy channeling as well as the spontaneous energy locking reported in the first paper of the series-persist in the low energy limit as well. In this study, we use a regular multi-scale asymptotic procedure and completely unveil the intrinsic mechanisms governing bi- and unidirectional energy channeling. Numerical simulations are found to be in a fairly good agreement with the predictions of analytic model.

Dispersion suppression of guided elastic waves by anisotropic metamaterial

This investigation presents a method to engineer a metamaterial exhibiting the desired anisotropic wave behavior with the specific applications toward the dispersion suppression of elastic guided waves. In the proposed approach, effective anisotropic properties required for dispersion suppression were first determined. Then the slowness curves for the metamaterial were used to find the specific unit cell configuration through inverse design. When the metamateral layers were attached to the homogeneous waveguide, the target guided mode was shown to exhibit little dispersion. Detailed engineering procedures were given, and the direct numerical simulations were performed to confirm the effectiveness of the proposed approach.

Phonon wave interference and thermal bandgap materials

Wave interference modifies phonon velocities and density of states, and in doing so creates forbidden energy bandgaps for thermal phonons. Materials that exhibit wave interference effects allow the flow of thermal energy to be manipulated by controlling the material's thermal conductivity or using heat mirrors to reflect thermal vibrations. The technological potential of these materials, such as enhanced thermoelectric energy conversion and improved thermal insulation, has fuelled the search for highly efficient phonon wave interference and thermal bandgap materials. In this Progress Article, we discuss recent developments in the understanding and manipulation of heat transport. We show that the rational design and fabrication of nanostructures provides unprecedented opportunities for creating wave-like behaviour of heat, leading to a fundamentally new approach for manipulating the transfer of thermal energy.

Nonlinear energy channeling in the two-dimensional, locally resonant, unit-cell model. I. High energy pulsations and routes to energy localization

Present paper is the first one in the series devoted to the analytical investigation of energy channeling phenomena emerging in the locally resonant unit-cell model comprising an outer mass incorporating internal rotator and subject to the 2D, nonlinear local potential. In the current study, we mainly focus on the analysis of the mechanisms of formation and bifurcations of the special type of non-stationary regimes, characterized by the massive, bidirectional energy transport between the axial and the lateral vibrations of the outer element controlled by the internal, rotational device as well as the regimes of the unidirectional energy localization. The devised analytical procedure is based on a singular multi-scale analysis constructed for the special asymptotic limit corresponding to the high energy excitations. The basic question of possible coexistence of various stationary and non-stationary system regimes as well as their local and global bifurcations is addressed via the reduction of the global flow on the slow invariant manifold in the vicinity of the fundamental resonance. Numerical simulations fully confirm the analytical predictions concerning the structure of the response regimes and their bifurcations.

A three-dimensional Bloch wave expansion to determine external scattering from finite phononic crystals

External scattering from a finite phononic crystal (PC) is studied using the Helmholtz-Kirchhoff integral theorem integrated with a Bloch wave expansion (BWE). The BWE technique is used to describe the internal pressure field of a semi-infinite or layered PC subject to an incident monochromatic plane wave. Following the BWE solution, the Helmholtz-Kirchhoff integral is used to determine the external scattered field. For cubic PCs, the scattered results are compared to numerical treatments in both the frequency and time domain. The presented approach is expected to be valid when the PC size is larger than the acoustic wavelength. However, very good agreement in the spatial beam pattern is also documented for both large and small (with respect to the wavelength) PCs. The result of this work is a fully-analytical, efficient, and verified approach for accurately predicting external scattering from finite, three-dimensional PCs.

Spectroscopic evidence for negative electronic compressibility in a quasi-three-dimensional spin-orbit correlated metal

Negative compressibility is a sign of thermodynamic instability of open or non-equilibrium systems. In quantum materials consisting of multiple mutually coupled subsystems, the compressibility of one subsystem can be negative if it is countered by positive compressibility of the others. Manifestations of this effect have so far been limited to low-dimensional dilute electron systems. Here, we present evidence from angle-resolved photoemission spectroscopy (ARPES) for negative electronic compressibility (NEC) in the quasi-three-dimensional (3D) spin-orbit correlated metal (Sr1-xLax)3Ir2O7. Increased electron filling accompanies an anomalous decrease of the chemical potential, as indicated by the overall movement of the deep valence bands. Such anomaly, suggestive of NEC, is shown to be primarily driven by the lowering in energy of the conduction band as the correlated bandgap reduces. Our finding points to a distinct pathway towards an uncharted territory of NEC featuring bulk correlated metals with unique potential for applications in low-power nanoelectronics and novel metamaterials.

Low frequency locally resonant metamaterials containing composite inclusions

One main feature of metamaterials is the occurrence of a negative dynamic mass density that is produced when an inner local resonance is present. The inner resonance can be obtained in composite materials containing composite inclusions. For suitable ratios of the physical properties of the constituting materials, the composite inclusions act as spring-mass systems. The scaling of physical properties leading to such an inner resonance and the associated effective dynamic properties of materials containing composite inclusions are briefly recalled. The resonance frequencies and dynamic mass densities are obtained in a closed form for materials containing cylindrical composite fibers or spherical composite inclusions, after solving the related boundary value elasticity problems.

Single-crystal Brillouin spectroscopy with CO2 laser heating and variable q

We describe a Brillouin spectroscopy system integrated with CO2 laser-heating and Raman spectroscopic capabilities. Temperature is determined by measurements of the grey-body thermal radiation emitted by the hot sample, with the system response calibrated relative to a standard tungsten ribbon lamp. High-pressure laser-heating Brillouin scattering measurements of acoustic velocities on liquid water and ice compressed in a diamond-anvil cell were performed at temperatures up to 2500 ± 150 K at high pressure. Single-crystal laser-heating Brillouin measurements were made on the (111) plane of San Carlos olivine at ∼13 GPa, 1300 ± 200 K. The pressure as measured by ruby fluorescence is shown to be within ±0.5 GPa of the pressure on the olivine sample during laser heating when KCl and KBr are used as pressure-transmitting media. In addition, the system is designed for continuously variable scattering angles from forward scattering (near 0° scattering angle) up to near back scattering (∼141°). This novel setup allows us to probe a wide range of wave vectors q for investigation of phonon dispersion on, for example, crystals with large unit cells (on the scale of hundreds of nm).

Information processing via physical soft body

Soft machines have recently gained prominence due to their inherent softness and the resulting safety and resilience in applications. However, these machines also have disadvantages, as they respond with complex body dynamics when stimulated. These dynamics exhibit a variety of properties, including nonlinearity, memory, and potentially infinitely many degrees of freedom, which are often difficult to control. Here, we demonstrate that these seemingly undesirable properties can in fact be assets that can be exploited for real-time computation. Using body dynamics generated from a soft silicone arm, we show that they can be employed to emulate desired nonlinear dynamical systems. First, by using benchmark tasks, we demonstrate that the nonlinearity and memory within the body dynamics can increase the computational performance. Second, we characterize our system’s computational capability by comparing its task performance with a standard machine learning technique and identify its range of validity and limitation. Our results suggest that soft bodies are not only impressive in their deformability and flexibility but can also be potentially used as computational resources on top and for free.

Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability

We investigate the unique mechanical properties of reentrant 3D origami structures based on the Tachi-Miura polyhedron (TMP). We explore the potential usage as mechanical metamaterials that exhibit tunable negative Poisson's ratio and structural bistability simultaneously. We show analytically and experimentally that the Poisson's ratio changes from positive to negative and vice versa during its folding motion. In addition, we verify the bistable mechanism of the reentrant 3D TMP under rigid origami configurations without relying on the buckling motions of planar origami surfaces. This study forms a foundation in designing and constructing TMP-based metamaterials in the form of bellowslike structures for engineering applications.

Flow stabilization by subsurface phonons

The interaction between a fluid and a solid surface in relative motion represents a dynamical process that is central to the problem of laminar-to-turbulent transition (and consequent drag increase) for air, sea and land vehicles, as well as long-range pipelines. This problem may in principle be alleviated via a control stimulus designed to impede the generation and growth of instabilities inherent in the flow. Here, we show that phonon motion underneath a surface may be tuned to passively generate a spatio-temporal elastic deformation profile at the surface that counters these instabilities. We theoretically demonstrate this phenomenon and the underlying mechanism of frequency-dependent destructive interference of the unstable flow waves. The converse process of flow destabilization is illustrated as well. This approach provides a condensed-matter physics treatment to fluid-structure interaction and a new paradigm for flow control.

Soft 3D acoustic metamaterial with negative index

Many efforts have been devoted to the design and achievement of negative-refractive-index metamaterials since the 2000s. One of the challenges at present is to extend that field beyond electromagnetism by realizing three-dimensional (3D) media with negative acoustic indices. We report a new class of locally resonant ultrasonic metafluids consisting of a concentrated suspension of macroporous microbeads engineered using soft-matter techniques. The propagation of Gaussian pulses within these random distributions of 'ultra-slow' Mie resonators is investigated through in situ ultrasonic experiments. The real part of the acoustic index is shown to be negative (up to almost - 1) over broad frequency bandwidths, depending on the volume fraction of the microbeads as predicted by multiple-scattering calculations. These soft 3D acoustic metamaterials open the way for key applications such as sub-wavelength imaging and transformation acoustics, which require the production of acoustic devices with negative or zero-valued indices.

Directional cloaking of flexural waves in a plate with a locally resonant metamaterial

This paper deals with the numerical design of a directional invisibility cloak for backward scattered elastic waves propagating in a thin plate (A0 Lamb waves). The directional cloak is based on a set of resonating beams that are attached perpendicular to the plate and are arranged at a sub-wavelength scale in ten concentric rings. The exotic effective properties of this locally resonant metamaterial ensure coexistence of bandgaps and directional cloaking for certain beam configurations over a large frequency band. The best directional cloaking was obtained when the resonators' length decreases from the central to the outermost ring. In this case, flexural waves experience a vanishing index of refraction when they cross the outer layers, leading to a frequency bandgap that protects the central part of the cloak. Numerical simulation shows that there is no back-scattering in these configurations. These results might have applications in the design of seismic-wave protection devices.

Broadband Lamb wave trapping in cellular metamaterial plates with multiple local resonances

We have investigated the Lamb wave propagation in cellular metamaterial plates constructed by bending-dominated and stretch-dominated unit-cells with the stiffness differed by orders of magnitude at an ultralow density. The simulation results show that ultralight metamaterial plates with textured stubs deposited on the surface can support strong local resonances for both symmetric and anti-symmetric modes at low frequencies, where Lamb waves at the resonance frequencies are highly localized in the vibrating stubs. The resonance frequency is very sensitive to the geometry of textured stubs. By reasonable design of the geometry of resonant elements, we establish a simple loaded-bar model with the array of oscillators having a gradient relative density (or weight) that can support multiple local resonances, which permits the feasibility of a broadband Lamb wave trapping. Our study could be potentially significant in designing ingenious weight-efficient acoustic devices for practical applications, such as shock absorption, cushioning, and vibrations traffic, etc.

Soft porous silicone rubbers as key elements for the realization of acoustic metamaterials

In this work, macroporous materials made of polydimethylsiloxane, a soft silicone rubber, are prepared using UV polymerization with an emulsion-templating procedure. The porosity of the final materials can be precisely controlled by adjusting the volume of the dispersed phase. We show that the porous structure of the materials is the template of the droplets of the initial emulsions. Mechanical tests show that the materials Young's moduli decrease with the porosity of the materials. Acoustic measurements indicate that, in such a porous elastomeric matrix, the sound speed also decreases dramatically as soon as the porosity increases to attain values of as low as 80 m/s. The results are compared to earlier ones on silica aerogels and are interpreted within the framework of a simple theoretical approach. We show that the very low sound speed value is a consequence of the low value of the polymer shear modulus. This explains why such porous soft silicone rubbers are so efficient at playing the role of slow-soft resonators in acoustic metamaterials. Moreover, the fast rate of polymerization of such UV-curable fluid allows for a facile shaping of the final material as beads or rods in microfluidic devices.1.

Wave propagation in granular chains with local resonances

We study wave propagation in a chain of spherical particles containing a local resonator. The resonant particles are made of an aluminum outer spherical shell and a steel inner mass connected by a polymeric plastic structure acting as a spring. We characterize the dynamic response of individual particles and the transmitted linear spectra of a chain of particles in contact. A wide band gap is observed both in theoretical and experimental results. We show the ability to tune the acoustic transmission by varying the contact interaction between particles. Higher driving amplitude leads to the generation of nonlinearities both in the response of a single particle and that of the whole chain. For a single resonant particle, we observe experimentally a resonant frequency downshift, which follows a complex nonlinear behavior. In the chain of particles, nonlinearity leads to the generation of nonlinear harmonics and the presence of localized modes inside the band gap.

Research on bandgaps in two-dimensional phononic crystal with two resonators

In this paper, the bandgap properties of a two-dimensional phononic crystal with the two resonators is studied and embedded in a homogenous matrix. The resonators are not connected with the matrix but linked with connectors directly. The dispersion relationship, transmission spectra, and displacement fields of the eigenmodes of this phononic crystal are studied with finite-element method. In contrast to the phononic crystals with one resonators and hollow structure, the proposed structures with two resonators can open bandgaps at lower frequencies. This is a very interesting and useful phenomenon. Results show that, the opening of the bandgaps is because of the local resonance and the scattering interaction between two resonators and matrix. An equivalent spring-pendulum model can be developed in order to evaluate the frequencies of the bandgap edge. The study in this paper is beneficial to the design of opening and tuning bandgaps in phononic crystals and isolators in low-frequency range.

Sound pressure level gain in an acoustic metamaterial cavity

The inherent attenuation of a homogeneous viscous medium limits radiation propagation, thereby restricting the use of many high-frequency acoustic devices to only short-range applications. Here, we design and experimentally demonstrate an acoustic metamaterial localization cavity which is used for sound pressure level (SPL) gain using double coiled up space like structures thereby increasing the range of detection. This unique behavior occurs within a subwavelength cavity that is 1/10^th of the wavelength of the incident acoustic wave, which provides up to a 13 dB SPL gain. We show that the amplification results from the Fabry-Perot resonance of the cavity, which has a simultaneously high effective refractive index and effective impedance. We also experimentally verify the SPL amplification in an underwater environment at higher frequencies using a sample with an identical unit cell size. The versatile scalability of the design shows promising applications in many areas, especially in acoustic imaging and underwater communication.

Hybrid phononic crystal plates for lowering and widening acoustic band gaps

We propose hybrid phononic-crystal plates which are composed of periodic stepped pillars and periodic holes to lower and widen acoustic band gaps. The acoustic waves scattered simultaneously by the pillars and holes in a relevant frequency range can generate low and wide acoustic forbidden bands. We introduce an alternative double-sided arrangement of the periodic stepped pillars for an enlarged pillars' head diameter in the hybrid structure and optimize the hole diameter to further lower and widen the acoustic band gaps. The lowering and widening effects are simultaneously achieved by reducing the frequencies of locally resonant pillar modes and prohibiting suitable frequency bands of propagating plate modes.

Bloch mode synthesis: ultrafast methodology for elastic band-structure calculations

We present a methodology for fast band-structure calculations that is generally applicable to problems of elastic wave propagation in periodic media. The methodology, called Bloch mode synthesis, represents an extension of component mode synthesis, a set of substructuring techniques originally developed for structural dynamics analysis. In Bloch mode synthesis, the unit cell is divided into interior and boundary degrees-of-freedom, which are described, respectively, by a set of normal modes and a set of constraint modes. A combination of these mode sets then forms a reduced basis for the band structure eigenvalue problem. The reduction is demonstrated on a phononic-crystal model and a locally resonant elastic-metamaterial model and is shown to accurately predict the frequencies and Bloch mode shapes with a dramatic decrease in computation time in excess of two orders of magnitude.

Anisotropic hypersonic phonon propagation in films of aligned ellipsoids

A material with anisotropic elastic mechanical properties and a direction-dependent hypersonic band gap is fabricated using ac electric field-directed convective self-assembly of colloidal ellipsoids. The frequency of the gap, which is detected in the direction perpendicular to particle alignment and entirely absent parallel to alignment, and the effective sound velocities can be tuned by the particle aspect ratio. We hypothesize that the band gap originates from the primary eigenmode peak, the m-splitted (s,1,2) mode, of the particle resonating with the effective medium. These results reveal the potential for powerful control of the hypersonic phononic band diagram by combining anisotropic particles and self-assembly.

Acoustic rainbow trapping by coiling up space

We numerically realize the acoustic rainbow trapping effect by tapping an air waveguide with space-coiling metamaterials. Due to the high refractive-index of the space-coiling metamaterials, our device is more compact compared to the reported trapped-rainbow devices. A numerical model utilizing effective parameters is also calculated, whose results are consistent well with the direct numerical simulation of space-coiling structure. Moreover, such device with the capability of dropping different frequency components of a broadband incident temporal acoustic signal into different channels can function as an acoustic wavelength division de-multiplexer. These results may have potential applications in acoustic device design such as an acoustic filter and an artificial cochlea.

Wave transmission in time- and space-variant helicoidal phononic crystals

We present a dynamically tunable mechanism of wave transmission in one-dimensional helicoidal phononic crystals in a shape similar to DNA structures. These helicoidal architectures allow slanted nonlinear contact among cylindrical constituents, and the relative torsional movements can dynamically tune the contact stiffness between neighboring cylinders. This results in cross-talking between in-plane torsional and out-of-plane longitudinal waves. We numerically demonstrate their versatile wave mixing and controllable dispersion behavior in both wavenumber and frequency domains. Based on this principle, a suggestion toward an acoustic configuration bearing parallels to a transistor is further proposed, in which longitudinal waves can be switched on and off through torsional waves.

Three-dimensional ultrathin planar lenses by acoustic metamaterials

Acoustic lenses find applications in various areas ranging from ultrasound imaging to nondestructive testing. A compact-size and high-efficient planar acoustic lens is crucial to achieving miniaturization and integration, and should have deep implication for the acoustic field. However its realization remains challenging due to the trade-off between high refractive-index and impedance-mismatch. Here we have designed and experimentally realized the first ultrathin planar acoustic lens capable of steering the convergence of acoustic waves in three-dimensional space. A theoretical approach is developed to analytically describe the proposed metamaterial with hybrid labyrinthine units, which reveals the mechanism of coexistence of high refractive index and well-matched impedance. A hyperbolic gradient-index lens design is fabricated and characterized, which can enhance the acoustic energy by 15 dB at the focal point with very high transmission efficiency. Remarkably, the thickness of the lens is only approximately 1/6 of the operating wavelength. The lens can work within a certain frequency band for which the ratio between the bandwidth and the center frequency reaches 0.74. By tailoring the structure of the metamaterials, one can further reduce the thickness of the lens or even realize other acoustic functionalities, opening new opportunity for manipulation of low-frequency sounds with versatile potential.

Enhanced acoustic sensing through wave compression and pressure amplification in anisotropic metamaterials

Acoustic sensors play an important role in many areas, such as homeland security, navigation, communication, health care and industry. However, the fundamental pressure detection limit hinders the performance of current acoustic sensing technologies. Here, through analytical, numerical and experimental studies, we show that anisotropic acoustic metamaterials can be designed to have strong wave compression effect that renders direct amplification of pressure fields in metamaterials. This enables a sensing mechanism that can help overcome the detection limit of conventional acoustic sensing systems. We further demonstrate a metamaterial-enhanced acoustic sensing system that achieves more than 20 dB signal-to-noise enhancement (over an order of magnitude enhancement in detection limit). With this system, weak acoustic pulse signals overwhelmed by the noise are successfully recovered. This work opens up new vistas for the development of metamaterial-based acoustic sensors with improved performance and functionalities that are highly desirable for many applications.

Focusing and waveguiding of Lamb waves in micro-fabricated piezoelectric phononic plates

This paper presents results on the numerical and experimental studies of focusing and waveguiding of the lowest anti-symmetric Lamb wave in micro-fabricated piezoelectric phononic plates. The phononic structure was based on an AT-cut quartz plate and consisted of a gradient-index phononic crystal (GRIN PC) lens and a linear phononic plate waveguide. The band structures of the square-latticed AT-cut quartz phononic crystal plates with different filling ratios were analyzed using the finite element method. The design of a GRIN PC plate lens which is attached with a linear phononic plate waveguide is proposed. In designing the waveguide, propagation modes in square-latticed PC plates with different waveguide widths were studied and the results were served for the experimental design. In the micro-fabrication, deep reactive ion etching (Deep-RIE) process with a laboratory-made etcher was utilized to fabricate both the GRIN PC plate lens and the linear phononic waveguide on an 80 μm thick AT-cut quartz plate. Interdigital transducers were fabricated directly on the quartz plate to generate the lowest anti-symmetric Lamb waves. A vibro-meter was used to detect the wave fields and the measured results on the focusing and waveguiding of the piezoelectric GRIN PC lens and waveguide are in good accordance with the numerical predictions. The results of this study may serve as a basis for developing an active micro plate lens and related devices.

An acoustic double fishnet using Helmholtz resonators

The acoustic transmission of a closely spaced pair of patterned and perforated rigid plates is explored in air. The structure resembles an acoustic double fishnet design, with each plate modified such that the gap between them acts as an array of Helmholtz resonators. This allows the center frequency of the stop band to be reduced by a factor greater than 2 from the value obtained for the conventional acoustic double fishnet design. Experimental results accord well with the predictions of a finite element model.

Controlling the thermomechanical behavior of nanoparticle/polymer films

We show that the mesoscale (∼200 nm) thermomechanical properties of polymer nanocomposites formed from silica nanoparticles (NPs) and poly(2-vinylpyridine) (P2VP) critically depend on their interfacial structure, which can be controlled by the casting solvent. The composite films are solvent cast from either pyridine (PYR) or methylethylketone (MEK), with uniform NP spatial distribution obtained in both cases. In the films cast from MEK, our previous work has shown that a bound layer of P2VP is formed at the NP surfaces, while no such bound layer is formed when PYR is used as the casting solvent. In PYR as-cast films, Brillouin light scattering reveals a single acoustic phonon with its longitudinal sound velocity increasing with NP loading. This implies a homogeneous mixture of the NP and the polymer on the mesoscopic scales for all compositions examined. However, in the MEK as-cast films, two longitudinal and two transverse acoustic phonons are observed at NP loadings above ∼20 wt % (or ∼11 vol %), reminiscent of two metastable microscopic phases. The dense microphase is attributed to the bridging of NPs by P2VP chains, whereas for the softer medium, we conjecture that there exists an interfacial lower density P2VP layer whose longitudinal sound velocity barely changes with NP loading. These solvent-induced differences in the (elastic) mechanical behavior disappear upon thermal annealing, suggesting that these nanocomposite interfacial structures in the as-cast state (far from equilibrium) locally approach equilibrium (i.e., near equilibrium after annealing). Consistent with these conclusions, the abrupt decrease of the longitudinal sound velocity with temperature occurs at a single glass transition temperature for the annealed nanocomposites irrespective of the casting solvent used, which assumes only a slightly higher (∼5 K at 45 wt % or ∼29 vol %) value than that in bulk P2VP. The results emphasize the important role of solvent in determining the interfacial structure of nanocomposites, which can be used to tailor their thermomechanical behavior.

Localization of acoustic modes in periodic porous silicon structures

The propagation of longitudinal acoustic waves in multilayer structures based on porous silicon and the experimental measurement of acoustic transmission for the structures in the gigahertz range are reported and studied theoretically. The considered structures exhibit band gaps in the transmission spectrum and these are localized modes inside the band gap, coming from defect layers introduced in periodic systems. The frequency at which the acoustic resonances appear can be tuned by changing the porosity and/or thickness of the defect layer.

Dynamics of periodic mechanical structures containing bistable elastic elements: from elastic to solitary wave propagation

We investigate the nonlinear dynamics of a periodic chain of bistable elements consisting of masses connected by elastic springs whose constraint arrangement gives rise to a large-deformation snap-through instability. We show that the resulting negative-stiffness effect produces three different regimes of (linear and nonlinear) wave propagation in the periodic medium, depending on the wave amplitude. At small amplitudes, linear elastic waves experience dispersion that is controllable by the geometry and by the level of precompression. At moderate to large amplitudes, solitary waves arise in the weakly and strongly nonlinear regime. For each case, we present closed-form analytical solutions and we confirm our theoretical findings by specific numerical examples. The precompression reveals a class of wave propagation for a partially positive and negative potential. The presented results highlight opportunities in the design of mechanical metamaterials based on negative-stiffness elements, which go beyond current concepts primarily based on linear elastic wave propagation. Our findings shed light on the rich effective dynamics achievable by nonlinear small-scale instabilities in solids and structures.

Harnessing buckling to design tunable locally resonant acoustic metamaterials

We report a new class of tunable and switchable acoustic metamaterials comprising resonating units dispersed into an elastic matrix. Each resonator consists of a metallic core connected to the elastomeric matrix through elastic beams, whose buckling is intentionally exploited as a novel and effective approach to control the propagation of elastic waves. We first use numerical analysis to show the evolution of the locally resonant band gap, fully accounting for the effect of nonlinear pre-deformation. Then, we experimentally measure the transmission of vibrations as a function of the applied loading in a finite-size sample and find excellent agreement with our numerical predictions. The proposed concept expands the ability of existing acoustic metamaterials by enabling tunability over a wide range of frequencies. Furthermore, we demonstrate that in our system the deformation can be exploited to turn on or off the band gap, opening avenues for the design of adaptive switches.

Generation of acoustic self-bending and bottle beams by phase engineering

Directing acoustic waves along curved paths is critical for applications such as ultrasound imaging, surgery and acoustic cloaking. Metamaterials can direct waves by spatially varying the material properties through which the wave propagates. However, this approach is not always feasible, particularly for acoustic applications. Here we demonstrate the generation of acoustic bottle beams in homogeneous space without using metamaterials. Instead, the sound energy flows through a three-dimensional curved shell in air leaving a close-to-zero pressure region in the middle, exhibiting the capability of circumventing obstacles. By designing the initial phase, we develop a general recipe for creating self-bending wave packets, which can set acoustic beams propagating along arbitrary prescribed convex trajectories. The measured acoustic pulling force experienced by a rigid ball placed inside such a beam confirms the pressure field of the bottle. The demonstrated acoustic bottle and self-bending beams have potential applications in medical ultrasound imaging, therapeutic ultrasound, as well as acoustic levitations and isolations.