Direct electron transfer for hemoglobin in biomembrane-like dimyristoyl phosphatidylcholine films on pyrolytic graphite electrodes

Direct electrochemistry and electrochemical catalysis of immobilized hemoglobin in an ethanol–water mixture

Hemoglobin (Hb) was immobilized on a glassy carbon electrode (GCE) surface by konjac glucomannan (KGM). KGM hydrogel films on GCE have relatively high stabilities in aqueous-ethanol mixtures. The entrapped hemoglobin undergoes fast direct electron transfer reactions in aqueous-organic solvent mixtures. The peak current is bigger, the peak-to-peak separation smaller and the formal potential observed in the cyclic voltammogram is more negative for Hb-KGM/GCE in ethanol-PBS compared to Hb-KGM/GCE in PBS. The electrochemical properties of the Hb in aqueous-organic solution are almost unchanged from with those observed for the purely aqueous solution, suggesting that water pools in the KGM hydrogel play an important role in preventing changes in conformation and making proteins unreactive with polar organic solvents. The immobilized Hb was able to catalyze the reduction of nitric oxide, peroxides (hydrogen peroxide, cumene hydroperoxide, t-butyl hydroperoxide, 2-butanone peroxide), and the dehalogenation of haloethanes (hexachloroethane, pentachloroethane, tetrachloroethane, etc.). The stability and reproducibility of the modified electrode meant that it could be used to determine these substances.

Thirty years of haemoglobin electrochemistry

Electrochemical investigations of the blood oxygen carrier protein include both mediated and direct electron transfer. The reaction of haemoglobin (Hb) with typical mediators, e.g., ferricyanide, can be quantified by measuring the produced ferrocyanide which is equivalent to the Hb concentration. Immobilization of the mediator within the electrode body allows reagentless electrochemical measuring of Hb. On the other hand, entrapment of the protein within layers of polyelectrolytes, lipids, nanoparticles of clay or gold leads to a fast heterogeneous electron exchange of the partially denatured Hb.

Direct electrochemistry and electrocatalysis of heme proteins entrapped in agarose hydrogel films in room-temperature ionic liquids

The electrochemistry and electrocatalysis of a number of heme proteins entrapped in agarose hydrogel films in the room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) have been investigated. UV-vis and FTIR spectroscopy show that the heme proteins retain their native structure in agarose film. The uniform distribution of hemoglobin in agarose-dimethylformamide film was demonstrated by atomic force microscopy. Cyclic voltammetry shows that direct electron transfer between the heme proteins and glassy carbon electrode is quasi-reversible in [bmim][PF(6)]. The redox potentials for hemoglobin, myoglobin, horseradish peroxidase, cytochrome c, and catalase were found to be more negative than those in aqueous solution. The charge-transfer coefficient and the apparent electron-transfer rate constant for these heme proteins in [bmim][PF(6)] were calculated from the peak-to-peak separation as a function of scan rate. The heme proteins catalyze the electroreduction of trichloroacetic acid and tert-butyl hydroperoxide in [bmim][PF(6)]. The kinetic parameter I(max) (maximum current at saturation concentration of substrate) and the apparent K(m) (Michaelis-Menten constant) for the electrocatalytic reactions were evaluated.

Direct electrochemistry and electrocatalytic activity of catalase incorporated onto multiwall carbon nanotubes-modified glassy carbon electrode

The direct voltammetry and electrocatalytic properties of catalase, which was adsorbed on the surface of multiwall carbon nanotubes (MWCNTs), was investigated. A pair of well-defined and nearly reversible cyclic voltammetry peaks for Fe(III)/Fe(II) redox couple of catalase adsorbed on the surface of MWCNTs at approximately -0.05 V versus reference electrode in pH 6.5 buffer solution, indicating the direct electron transfer between catalase and electrode. The surface coverage of catalase immobilized on MWCNTs glassy carbon electrode was approximately 2.4x10(-10) molcm-2. The transfer coefficient (alpha) was calculated to be 0.4, and the heterogeneous electron transfer rate constant was 80 s-1 in pH 7, indicating great facilitation of the electron transfer between catalase and MWCNTs adsorbed on the electrode surface. The formal potential of catalase Fe(III)/Fe(II) couple in MWCNTs film had a linear relationship with pH values between 2 and 11 with a slope of 58 mV/pH, showing that the electron transfer is accompanied by single proton transportation. Catalase adsorbed on MWCNTs exhibits a remarkable electrocatalytic activity toward the reduction of oxygen and hydrogen peroxide. The value for calculated Michaelis-Menten constant (1.70 mM) was high, indicating the potential applicability of the films as a new type of reagentless biosensor based on the direct electrochemistry of the catalase enzyme.

Studies on direct electron transfer and biocatalytic properties of heme proteins in lecithin film

Myoglobin (Mb), hemoglobin (Hb) and horseradish peroxidase (HRP) were incorporated in lecithin (PC) film on glassy carbon (GC) electrode by the method of vesicle-fusion. A pair of well-defined and quasi-reversible cyclic voltammetric peaks was obtained, which reflected the direct electron transfer of heme proteins. UV-Vis and reflectance absorption infrared (RAIR) spectroscopy showed that proteins in PC films remained at their secondary structure similar to their native states. Scanning electron microscopy (SEM) demonstrated the interaction between the proteins and PC would make the morphology of protein-PC films very different from the PC films alone. The immobilized proteins retained their biocatalytic activity to the reduction of NO and hydrogen peroxide, which provide the perspective to be the third generation sensors.

An electrochemical investigation of hemoglobin and catalase incorporated in collagen films

Collagen, an electrochemically inert protein, formed films on pyrolytic graphite (PG) electrodes, which provided a suitable microenvironment for heme proteins to transfer electron directly with the underlying electrodes. Hemoglobin (Hb) and catalase (Cat) incorporated in collagen films exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks at around -0.35 V and -0.47 V (vs. SCE) in pH 7.0 buffers, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. UV-vis spectra showed that the heme proteins in collagen films retained their near-native conformations in the medium pH range. The results of scanning electron microscopy (SEM) demonstrated that the interaction between heme proteins and collagen made the morphology of dry protein-collagen films different from the collagen films alone. The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') of the films were estimated by using square wave voltammograms (SWV) and nonlinear regression analysis. The heme protein-collagen film electrodes were also used to catalyze the reduction of nitrite, oxygen and hydrogen peroxide, indicating potential applications of the films for the fabrication of a new type of biosensor that does not use mediators.

Direct electrochemistry of hemoglobin immobilized on gold electrode by Langmuir–Blodgett technique

In this research, we reported a novel method of forming hemoglobin (Hb)-linoleic acid (LA) Langmuir-Blodgett (LB) monolayer by spreading Hb solution directly onto the subphase covered with a layer of LA. This method is suitable for preparing electrochemical devices with protein-lipid LB film because almost no protein adsorbed on electrode surface before protein-lipid film transferred from air-water interface to electrode, which ensured better electrode activity. The compressibility of Hb-LA monolayer was used to character the phase transition during compression process. Optimal experimental conditions were obtained by analyzing pressure-time, pressure-area and pressure-compressibility curves. The direct electrochemistry of Hb, which was immobilized on Au electrode surface incorporated with LA layer by LB method, was investigated using cyclic voltammetry for the first time. The electrode modified with Hb-LA LB film holds high electrochemical activity and shows a fast direct electron transfer of Hb. Redox peak currents increased linearly with the increase of scan rate, indicating a surface-controlled electrode process. The electron transfer rate constant was 2.68+/-0.45 s-1. As a target of this research, this work provides a new way to prepare biomimetic film and biosensor.

Direct electrochemistry and electrocatalysis of hemoglobin in poly-3-hydroxybutyrate membrane

Hemoglobin (Hb) can take direct electron-transfer reactions after being entrapped in poly-3-hydroxybutyrate (PHB) film. A pair of well-defined, quasi-reversible cyclic voltammetric peaks is thus obtained at an Hb-PHB modified pyrolytic graphite electrode. The anodic and cathodic peaks are located at -224 and -284 mV for a pH 5.0 acetate buffer solution. Meanwhile, the peroxidase activity of the protein in the membrane has been greatly enhanced, with the apparent Michaelis-Menten constant calculated to be 1076 microM. According to the direct electron transfer property and enhanced peroxidase activity of Hb in the membrane, a Hb-PHB based hydrogen peroxide biosensor is prepared, with a linear range 6.0 x 10(-7) to 8.0 x 10(-4) M. The pathway of reductive dehalogenation of trichloroacetic acid is also discussed in detail. The highly reduced form of Hb produced in PHB film can be used to dechlorinate di- and monochloroacetic acid. The catalytic ability of Hb toward the reduction of nitric oxide has been investigated as well. Due to its biodegradability, low cost, chemical inertness, and especially its biocompatibility and non-toxicity, PHB would be a desirable film in the sensor field.

Third-generation biosensors based on the direct electron transfer of proteins

Recent progress in third-generation electrochemical biosensors based on the direct electron transfer of proteins is reviewed. The development of three generations of electrochemical biosensors is also simply addressed. Special attention is paid to protein-film voltammetry, which is a powerful way to obtain the direct electron transfer of proteins. Research activities on various kinds of biosensors are discussed according to the proteins (enzymes) used in the specific work.

Voltammetric studies of hemoglobin-coated polystyrene latex bead films on pyrolytic graphite electrodes

A novel hemoglobin (Hb)-coated polystyrene (PS) latex bead film was deposited on pyrolytic graphite (PG) electrode surface. In the first step, positively charged Hb molecules in pH 5.0 buffers were adsorbed on the surface of negatively charged, 500 nm diameter PS latex beads bearing sulfate groups by electrostatic interaction. The aqueous dispersion of Hb-coated PS particles was then deposited on the surface of PG electrodes and, after evaporation of the solvent, Hb-PS films were formed. The Hb-PS film electrodes exhibited a pair of well-defined, quasi-reversible cyclic voltammetric (CV) peaks at about -0.36 V vs. SCE in pH 7.0 buffers, characteristic of Hb heme Fe(III)/Fe(II) redox couples. Positions of Soret absorption band of Hb-PS films suggest that Hb retains its near-native structure in the films in its dry form and in solution at medium pH. The Hb in PS films was also acted as a catalyst to catalyze electrochemical reduction of various substrates such as trichloroacetic acid (TCA), nitrite, oxygen and hydrogen peroxide.

Electrochemical investigation of the chloride effect on hemoglobin

Direct electron transfer between hemoglobin and gold electrode is achieved at both a bare and a 4, 4'-bipyridine-modified gold electrode in the presence of chloride ions. The addition of chloride to hemoglobin solution also increases the reversibility of the direct electrochemistry and shifts the formal potential of hemoglobin to the negative direction. While the existence of chloride does not significantly change the tertiary structure of the protein, it might induce a slight variation of the structure, which is beneficial to the electrochemical response. It is suggested that the chloride binding to hemoglobin is a combination of specific and unspecific bindings.

An electrochemical investigation of effect of ATP on hemoglobin

The titratable potentiometric response of hemoglobin (Hb) induced by adenosine-5'-triphosphate (ATP) is observed. The concentration-dependent effect of ATP on the anaerobic redox reaction of the protein at pH 7.0 reflects that ATP will induce stabilization of the reduced state and destabilization of the R-like (met Fe(III)) state of the metHb, when ATP concentration is lower than 3.0 mM. But when ATP concentration is between 4 and 7 mM, shift of the oxidation potential may also be observed. With reference to the study of adenosine, adenosine-5'-monophosphate, adenosine-5'-diphosphate and 2,3-diphosphoglycerate, the allosteric effect of ATP on Hb is discussed extensively. This study has given an electrochemical approach to the investigation of effect of ATP, an in vivo allosteric effector, on Hb in the physiological concentration range.

Direct electrochemistry and electrocatalysis of hemoglobin immobilized on carbon paste electrode by silica sol–gel film

Direct electrochemical and electrocatalytic behaviors of hemoglobin (Hb) immobilized on carbon paste electrode (CPE) by a silica sol-gel film derived from tetraethylorthosilicate (TEOS) were investigated for the first time. Hb/sol-gel film modified electrodes showed a pair of well-defined and nearly reversible cyclic voltammetric peaks for Hb Fe(III)/Fe(II) redox couple at about -0.312 V (versus Ag/AgCl) in a pH 7.0 phosphate buffer. The formal potential of Hb heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 5.0-10.0 with a slope of 49.44 mV pH(-1), which suggests that a proton transfer is accompanied with each electron transfer (ET) in the electrochemical reaction. The immobilized Hb displayed the features of peroxidase and gave excellent electrocatalytic performance to the reduction of O2, NO2(-) and H2O2. The calculated apparent Michaelis-Menten constant was 8.98 x 10(-4)M, which indicated that there was a large catalytic activity of Hb immobilized on CPE by sol-gel film toward H2O2. In comparison with other electrodes, the chemically modified electrodes, used in this direct electrochemical study of Hb, are easy to be fabricated and rather inexpensive. Consequently, the Hb/sol-gel film modified electrode provides a convenient approach to perform electrochemical research on this kind of proteins. It also has potential use in the fabrication of the third generation biosensors and bioreactors.

Heme protein films with polyamidoamine dendrimer: direct electrochemistry and electrocatalysis

Biocompatible nanosized polyamidoamine (PAMAM) dendrimer films provided a suitable microenvironment for heme proteins to transfer electron directly with underlying pyrolytic graphite (PG) electrodes. Hemoglobin (Hb), myoglobin (Mb), horseradish peroxidase (HRP), and catalase (Cat) incorporated in PAMAM films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. While Hb-, Mb-, and HRP-PAMAM films showed the cyclic voltammetry (CV) peaks at about -0.34 V vs. saturated calomel electrode (SCE) in pH 7.0 buffers, Cat-PAMAM films displayed the peak pair at a more negative potential of -0.47 V. The protein-PAMAM films demonstrated a surface-confined or thin-layer voltammetric behavior. The electrochemical parameters such as apparent heterogeneous electron transfer rate constants (k(s)) and formal potentials (E (degrees ')) were estimated by square wave voltammetry with nonlinear regression analysis. UV-vis and IR spectroscopy showed that the proteins retained their near-native secondary structures in PAMAM films. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at the protein-PAMAM film electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of the proteins.

Enhanced electron-transfer reactivity of horseradish peroxidase in phosphatidylcholine films and its catalysis to nitric oxide

Direct electrochemistry of horseradish peroxidase (HRP) embedded in film of phosphatidylcholine (PC) is investigated at a pyrolytic graphite electrode by voltammetric methods. The electron-transfer reactivity between incorporated HRP and the electrode is found to be greatly enhanced by phosphatidylcholine film. Cyclic voltammetry (CV) of this incorporated peroxidase shows a pair of well-defined and nearly reversible peaks, and the cathodic and anodic peak potentials are located at about -0.261 and -0.180 V, respectively versus saturated calomel electrode at pH 5.5. Ultraviolet-visible absorption spectra indicate that the heme microenvironment of HRP in phosphatidylcholine film is similar to that of its native status. It is also observed that HRP modified electrode is able to catalyze the electrochemical reduction of nitric oxide. Experimental results reveal that the peak current related to nitric oxide reduction is linearly proportional to its concentration in the ranges of 2.0 x 10(-7) -5.0 x 10(-6) mol (-1) and 2.0 x 10(-5) -1.0 x 10(-4) mol(-1), based on which an unmediated biosensor for nitric oxide is developed.

Direct electron transfer and enzymatic activity of hemoglobin in a hexagonal mesoporous silica matrix

The direct electrochemistry of hemoglobin (Hb) immobilized on a hexagonal mesoporous silica (HMS)-modified glassy carbon electrode was described. The interaction between Hb and the HMS was investigated using UV-Vis spectroscopy, FT-IR, and electrochemical methods. The direct electron transfer of the immobilized Hb exhibited two couples of redox peaks with the formal potentials of -0.037 and -0.232 V in 0.1 M (pH 7.0) PBS, respectively, which corresponded to its two immobilized states. The electrode reactions showed a surface-controlled process with a single proton transfer at the scan rate range from 20 to 200 mV/s. The immobilized Hb retained its biological activity well and displayed an excellent response to the reduction of both hydrogen peroxide (H2O2) and nitrate (NO2-). Its apparent Michaelis-Menten constants for H2O2 and NO2- were 12.3 and 49.3 microM, respectively, showing a good affinity. Based on the immobilization of Hb on the HMS and its direct electrochemistry, two novel biosensors for H2O2 and NO2- were presented. Under optimal conditions, the sensors could be used for the determination of H2O2 ranging from 0.4 to 6.0 microM and NO2- ranging from 0.2 to 3.8 microM. The detection limits were 1.86 x 10(-9) M and 6.11 x 10(-7) M at 3sigma, respectively. HMS provided a good matrix for protein immobilization and biosensor preparation.

Driving forces for layer-by-layer self-assembly of films of SiO2 nanoparticles and heme proteins

Heme protein hemoglobin (Hb) or myoglobin (Mb) and silica nanoparticles in a variety of charge states were assembled layer-by-layer into films on solid surfaces to investigate the driving forces for film assembly. Cyclic voltammetry (CV), quartz crystal microbalance (QCM), X-ray photoelectron spectroscopy (XPS), and UV-vis and reflectance absorption infrared (RAIR) spectroscopy were used to characterize the different [SiO2/protein]n films. Even when the proteins and silica were both negatively charged, stable layer-by-layer [SiO2/protein]n films were successfully fabricated, although amounts of protein were smaller than when nanoparticles and proteins had opposite charges. Results suggest the importance of localized Coulombic attractions between the negative nanoparticle surface and positively charged amino acid residues on the Mb or Hb surfaces in the assembly and for the stability of [SiO2/protein]n films.

Direct electron transfer and bioelectrocatalysis of hemoglobin at a carbon nanotube electrode

A stable suspension of carbon nanotube (CNT) can be obtained by dispersing the CNT in the solution of the surfactant cetyltrimethylammonium bromide. CNT has promotion effects on the direct electron transfer of hemoglobin (Hb), which was immobilized onto the surface of CNT. The direct electron transfer rate of Hb was greatly enhanced after it was immobilized onto the surface of CNT. Cyclic voltammetric results showed a pair of well-defined redox peaks, which corresponded to the direct electron transfer of Hb, with the formal potential (E(0('))) at about -0.343V (vs. saturated calomel electrode) in the phosphate buffer solution (pH 6.8). The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k(s)) and the value of formal potential (E(0('))) were estimated. The dependence of E(0(')) on solution pH indicated that the direct electron transfer reaction of Hb is a one-electron transfer coupled with a one-proton transfer reaction process. The experimental results also demonstrated that the immobilized Hb retained its bioelectrocatalytic activity to the reduction of H(2)O(2). The electrocatalytic current was proportional to the concentration of H(2)O(2) at least up to 20mM.

Electrochemical Determination of Serotonin and the Competitive Adsorption with Dopamine at 5,5-Ditetradecyl-2-(2-trimethylammonioethyl)-1,3-dioxane Bromide Lipid Film Modified by Glassy Carbon Electrode

A novel and effective approach to sensitively determine serotonin, known as 5-hydroxytryptamine (5-HT), has been proposed based on a 5,5-ditetradecyl-2-(2-trimethylammonioethyl)-1,3-dioxane bromide (DTDB) self-assembled lipid bilayer membrane modified glassy carbon electrode (DTDB/GCE). A DTDB/GCE shows the strong electrocatalysis for the oxidation of 5-HT, with the peak potential shifted to less positive value of 0.376 V vs. SCE, and effectively eliminates the interference from ascorbic acid (AA), even in the presence of 100-fold concentration of AA. Differential pulse voltammetry (DPV) gave a linear current for 5-HT from 2.0 x 10(-7) to 1.0 x 10(-5) M. At the DTDB/GCE, the oxidation of 5-HT was controlled by the adsorption process; for 5-HT coexisting with DA, the competitive adsorption was observed.

Electrochemical and electrocatalytic properties of myoglobin and hemoglobin incorporated in carboxymethyl cellulose films

Protein-CMC films were made by casting a solution of myoglobin (Mb) or hemoglobin (Hb) and carboxymethyl cellulose (CMC) on pyrolytic graphite electrodes. In pH 7.0 buffers, Mb and Hb incorporated in CMC films gave a pair of well-defined and quasi-reversible cyclic voltammetric peaks at about -0.34 V vs. SCE, respectively, characteristic of heme Fe(III)/Fe(II) redox couples of the proteins. The electrochemical parameters such as apparent standard heterogeneous electron transfer rate constants (k(s)) and formal potentials (E degrees ') were estimated by square wave voltammetry with nonlinear regression analysis. In aqueous solution, stable CMC films absorbed large amounts of water and formed hydrogel. Scanning electron microscopy of the films showed that interaction between Mb or Hb and CMC would make the morphology of dry protein-CMC films different from the CMC films alone. Positions of Soret absorbance band suggest that Mb and Hb in CMC films retain their secondary structure similar to the native states in the medium pH range. Trichloroacetic acid, nitrite, oxygen, and hydrogen peroxide were catalytically reduced at protein-CMC film electrodes.

Direct voltammetry and electrocatalytic properties of catalase incorporated in polyacrylamide hydrogel films

The direct voltammetry and electrocatalytic properties of catalase (Cat) in polyacrylamide (PAM) hydrogel films cast on pyrolytic graphite (PG) electrodes were investigated. Cat-PAM film electrodes showed a pair of well-defined and nearly reversible cyclic voltammetry peaks for Cat Fe(III)/Fe(II) redox couples at approximately -0.46 V vs. SCE in pH 7.0 buffers. The electron transfer between catalase and PG electrodes was greatly facilitated in the microenvironment of PAM films. The apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') were estimated by fitting square wave voltammograms with non-linear regression analysis. The formal potential of Cat Fe(III)/Fe(II) couples in PAM films had a linear relationship with pH between pH 4.0 and 9.0 with a slope of -56 mV pH(-1), suggesting that one proton is coupled with single-electron transfer for each heme group of catalase in the electrode reaction. UV-Vis absorption spectroscopy demonstrated that catalase retained a near native conformation in PAM films at medium pH. The embedded catalase in PAM films showed the electrocatalytic activity toward dioxygen and hydrogen peroxide. Possible mechanism of catalytic reduction of H(2)O(2) at Cat-PAM film electrodes was proposed.

Electrochemical biosensors utilising electron transfer in heme proteins immobilised on Fe3O4nanoparticles

Fe3O4 nanoparticles cast on pyrolytic graphite (PG) electrodes were used to immobilize hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP). The Fe3O4 nanoparticles provided a favorable microenvironment for the proteins to directly transfer electrons with electrodes. The protein-Fe3O4 films were used to electrochemically catalyze the reduction of oxygen, trichloroacetic acid, nitrite and hydrogen peroxide, and showed a potential applicability in fabricating biosensors. Transmission electron microscopy (TEM), UV-visible absorption and reflectance absorption infrared (RAIR) spectroscopy, and cyclic and square wave voltammetry, were used to characterize the films.

Electrochemistry and electrocatalysis with heme proteins in chitosan biopolymer films

Protein-chitosan (CS) films were made by casting a solution of proteins and CS on pyrolytic graphite electrodes. Myoglobin (Mb), hemoglobin (Hb), and horseradish peroxidase (HRP) incorporated in CS films gave a pair of stable, well-defined, and quasi-reversible cyclic voltammetric peaks at about -0.33V vs saturated calomel electrode in pH 7 buffers, respectively, while catalase (Ct) in CS films showed a peak pair at about -0.46V which was not stable. All these peaks are located at the potentials characteristic of heme Fe(III)/Fe(II) redox couples of the proteins. The electrochemical parameters such as formal potentials (E degrees (')) and apparent heterogeneous electron-transfer rate constants (k(s)) were estimated by square-wave voltammetry with nonlinear regression analysis. Chitosan films contained considerable water and formed hydrogel in aqueous solution. Positions of the Soret absorbance band suggest that Mb and Hb in CS films keep their secondary structure similar to the native states in the medium pH range, while HRP and Ct retain their native conformation at least in the dry CS films. Scanning electron microscopy of the films demonstrated that interaction between the proteins and CS would make the morphology of dry protein-CS films very different from the CS films alone. Oxygen, trichloroacetic acid, nitrite, and hydrogen peroxide were catalytically reduced by all four proteins in CS films.

Nitric oxide biosensors based on Hb/phosphatidylcholine films

Hemoglobin (Hb) was entrapped in a phosphatidylcholine (PC) film and immobilized at a pyrolytic graphite (PG) electrode surface. Its electron-transfer reactivity and enzyme activity were characterized by employing electrochemical methods. It was observed that Hb exhibited direct electrochemistry as well as enzyme-like activity towards the electrocatalytic reduction of NO in PC film. An unmediated, reagentless nitrogen oxide (NO) biosensor was accordingly prepared. Experimental results revealed that the peak current related to NO was linearly proportional to its concentration in the range of 1.0 x 10(-7)-3.0 x 10(-4) mol/L. The detection limit was estimated to be 1.0 x 10(-7) mol/L. Considering its good stability, nice selectivity and easy construction, this biosensor shows great promise for the rapid determination of traces of NO.

Assembly of electroactive layer-by-layer films of hemoglobin and polycationic poly(diallyldimethylammonium)

Layer-by-layer (PDDA/Hb)(n) films were assembled by alternate adsorption of positively charged poly(diallyldimethylammonium) (PDDA) and negatively charged hemoglobin (Hb) at pH 9.2 from their aqueous solutions on pyrolytic graphite electrodes and other substrates. The assembly process was monitored and confirmed by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). CVs of (PDDA/Hb)(n) films showed a pair of well-defined, nearly reversible peaks at about -0.34 V vs SCE at pH 7.0, characteristic of Hb heme Fe(III)/Fe(II) redox couple. Positions of Soret absorption band and infrared amide II band of Hb in (PDDA/Hb)(8) films suggest that Hb in the films keeps its secondary structure similar to its native state. The electrochemical parameters of (PDDA/Hb)(8) films were estimated by square wave voltammetry, and the thickness of the PDDA/Hb bilayer was estimated by QCM and scanning electron microscopy. Trichloroacetic acid and nitrite (NO(2)(-)) were catalytically reduced at (PDDA/Hb)(8) film electrodes. The electrochemical catalytic reactions of O(2) and H(2)O(2) on (PDDA/Hb)(8) films were also studied.

Direct voltammetry and catalysis with Mycobacterium tuberculosis catalase-peroxidase, peroxidases, and catalase in lipid films

Stable films of dimyristoylphosphatidylcholine and M. tuberculosis catalase-peroxidase (KatG), several peroxidases, myoglobin, and catalase showed reversible FeIII/FeII voltammetry on pyrolytic graphite electrodes and catalytic current for hydrogen peroxide and oxygen. Amperometric responses for these films to H2O2 at 0 V are likely to contain significant contributions from catalytic reduction of oxygen produced during the catalytic cycles. Relative apparent turnover rates at pH 6 based on steady-state currents at 0 V versus SCE in the presence of H2O2 were in the order horseradish peroxidase > cytochrome c peroxidase (CcP) > soybean peroxidase > myoglobin > KatG > catalase. Lower currents for the very efficient peroxide scavengers KatG and catalase may be related to the instability of their compounds I in the presence of H2O2. KatG catalyzed the electrochemical reduction of oxygen more efficiently than catalase and CcP but less efficiently than the other peroxidases. DMPC films incorporating glucose oxidase and peroxidases gave good analytical responses to glucose, demonstrating the feasibility of dual enzyme-lipid films for biosensor fabrication.

Direct electrochemistry of hemoglobin in layer-by-layer films with poly(vinyl sulfonate) grown on pyrolytic graphite electrodes

Stable layer-by-layer electroactive films were grown on pyrolytic graphite (PG) electrodes by alternate adsorption of layers of polyanionic poly(vinyl sulfonate) (PVS) and positively charged hemoglobin (Hb) from their aqueous solutions. Cyclic voltammetry (CV) of [PVS/Hb]n films showed a pair of well-defined and nearly reversible peaks at about - 0.28 V vs. SCE at pH 5.5, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The process of (PVS/Hb) bilayer growth was monitored and confirmed by CV, X-ray photoelectron spectroscopy (XPS) and UV-Vis spectroscopy. While the amount of Hb adsorbed in each bilayer was the same, the amount of electroactive Hb in each bilayer decreased dramatically with increase of the number of bilayer, and electroactivity was just extended to 8 [PVS/Hb] bilayers. CVs of [PVS/Hb]8 films maintained stable in buffers containing no Hb. Positions of Soret band of Hb in [PVS/Hb]n films grown on transparent glass slides suggest that Hb in the films keeps its secondary structure similar to its native state in a wide pH range. Trichloroacetic acid and nitrite were catalytically reduced by [PVS/Hb]8 films with significant lowering of the electrode potential required.

Electroactive hemoglobin-surfactant-polymer biomembrane-like films

Polyions complex 2C12N+ PSS- was prepared by reacting poly(sodium styrenesulfonate) (Na+ PSS-) with didodecyldimethylammonium bromide (2Cl2N+ Br-). Stable thin films made from 2C12N+ PSS- with incorporated redox protein hemoglobin (Hb) on pyrolytic graphite (PG) electrodes were then characterized by electrochemistry and other techniques. Cyclic voltammetry (CV) of Hb-2C12N+ PSS- films showed a pair of well-defined and nearly reversible peaks for HbFe(III)/Fe(II) couple at about -0.17 V vs. saturated calomel electrode (SCE) in pH 5.5 buffers. The electron transfer rate between Hb and PG electrode was greatly facilitated in microenvironment of 2C12N+ PSS- films. Positions of Soret absorption band suggest that Hb keeps its secondary structure similar to its native state in 2C12N+ PSS- films at the medium pH. The results of X-ray diffraction and differential scanning calorimetry (DSC) suggest synthesized lipid 2C12N+ PSS- films have an ordered bilayer structure intercalated between PSS- polyion layers, and the incorporated Hb expands the layer spacing of the films. HbFe(I), a highly reduced form of Hb, might also be produced in these films at about -1.09 V, and could be used to catalytically reduce organohalide pollutants.