Chemical structure, surface properties and biological activities of the biosurfactant produced by Pseudomonas aeruginosa LBI from soapstock

Bioconversion of sodium dodecyl sulphate to rhamnolipids by transformed Escherichia coli DH5α cells-a novel strategy for rhamnolipid synthesis

AIMS

Biological synthesis of rhamnolipids from SDS by Pseudomonas aeruginosa S15 is found to be a cost effective mode of rhamnolipid synthesis. This study aimed to attempt rhamnolipid synthesis by transformant Escherichia coli DH5α cells.

METHODS AND RESULTS

Molecular analysis by curing experiments revealed that the properties of SDS based rhamnolipid synthesis were plasmid borne. Transformation of 10 kb plasmid to E. coli DH5α cells conferred rhamnolipid synthetic ability to transformant. Various genetic elements involved in SDS based rhamnolipid synthesis were analyzed using PCR based and restriction digestion based approaches. PCR amplification using primers specific for sdsA gene encoding alkylsulfatases yielded two significant amplicons viz, 1·2 kb fragment and 422 bp fragment, coding for putative dehydratase and ABC transporter respectively. Amplicon of sdsB gene lacked ability of SDS degradation and rhamnolipid synthesis. Rhamnolipid biosynthesis by transformant E. coli DH5α containing the whole of the 10 kb plasmid, was optimized to yield of 3·38 g l(-1) in 5 days of incubation.

CONCLUSIONS

Plasmid encoded rhamnolipid synthesis from recombinant E. coli cells is novel and could serve as yet another promising approach among various steps adopted for safe and effective rhamnolipid synthesis.

SIGNIFICANCE AND IMPACT OF THE STUDY

SDS based rhamnolipid synthesis by S15 attained a high substrate (SDS) to product (Rhamnolipid) conversion ratio. However, the use of Pseudomonas strains is always discouraged as they are opportunistic pathogens and could sometimes turn infectious. Thus, transformation of genetic elements coding SDS based rhamnolipid synthesis to nonpathogenic strains could be promising.

Biological surface-active compounds from marine bacteria

Surface-active compounds (SACs) are widely used in different industries as well as in many daily consumption products. However, with the increasing concern for their environmental acceptability, attention has turned towards biological SACs which are biodegradable, less toxic and more environmentally friendly. In this work, 176 marine hydrocarbon-degrading bacterial isolates from petroleum-contaminated sites along the Norwegian coastline were isolated and screened for their capacity to produce biological SACs. Among them, 18 isolates were capable of reducing the surface tension of the culture medium by at least 20 mN m(-1) and/or capable of maintaining more than 40% of the emulsion volume after 24 h when growing on glucose or kerosene as carbon and energy source. These isolates were members of the genera Pseudomonas, Pseudoalteromonas, Rhodococcus, Catenovulum, Cobetia, Glaciecola, Serratia, Marinomonas and Psychromonas. Two isolates, Rhodococcus sp. LF-13 and Rhodococcus sp. LF-22, reduced surface tension of culture medium by more than 40 mN m(-1) when growing on kerosene, n-hexadecane or rapeseed oil. The biosurfactants were produced by resting cells of the two Rhodococcus strains suggesting the biosynthesis of the biosurfactants was not necessarily associated with their growth on hydrocarbons.

Di-rhamnolipid is a mosquito pupicidal metabolite from Pseudomonas fluorescens (VCRC B426)

Pseudomonas fluorescens Migula (VCRC B426) produces a secondary metabolite, which was found to be active against pupae of vector mosquitoes namely Culex quinquefasciatus, Anopheles stephensi and Aedes aegypti. The mosquito pupicidal metabolite from P. fluoescens was mass produced and separated by ethyl acetate extraction and purified further by silica gel column chromatography, FPLC, HPLC and TLC. The purified metabolite was characterized by NMR, FT-IR, LC-MS and MALDI-TOF. The FT-IR, (1)H and (13)C NMR results showed that it is a rhamnolipid (di-rhamnolipid). The matrix assisted laser desorption and ionization-time-of-flight spectrum of the sample showed predominant pupicidal component produced by P. fluorescens was the molecule mass of 673.40 Da. Owing to its high toxicity to mosquito pupae, especially Anopheles sp., and Aedes sp., the di-rhamnolipd has potential in the control of the vectors of dengue, chikungunya, yellow fever and malaria. This is the first report of mosquito pupicidal di-rhamnolipid from P. fluorescens.

Glycolipid biosurfactants: Potential related biomedical and biotechnological applications

Glycolipids, consisting of a carbohydrate moiety linked to fatty acids, are microbial surface active compounds produced by various microorganisms. They are characterized by highly structural diversity and have the ability to decrease the surface and interfacial tension at the surface and interface respectively. Rhamnolipids, trehalolipids, mannosylerythritol-lipids and cellobiose lipids are among the most popular glycolipids. Moreover, their ability to form pores and destabilize biological membrane permits their use in biomedicine as antibacterial, antifungal and hemolytic agents. Their antiviral and antitumor effects enable their use in pharmaceutic as therapeutic agents. Also, glycolipids can inhibit the bioadhesion of pathogenic bacteria enabling their use as anti-adhesive agents and for disruption of biofilm formation and can be used in cosmetic industry. Moreover, they have great potential application in industry as detergents, wetting agents and for flotation. Furthermore, glycolipids can act at the surface and can modulate enzyme activity permitting the enhancement or the inhibition of the activity of certain enzymes.

Rhamnolipid production, characterization and fermentation scale-up by Pseudomonas aeruginosa with plant oils

OBJECTIVES

To be competitive with common chemical surfactants, the cost of rhamnolipid production must be minimized by selecting suitable substrates and optimizing the fermentation process.

RESULTS

With different plant oils as substrates, Pseudomonas aeruginosa TIB-R02 can produce rhamnolipids with different structural characteristics that were confirmed by HPLC/MS analysis. Different rhamnolipids had different performances in interfacial tension. The production of rhamnolipid was greatly enhanced by fermentation optimization with palm oil as substrate. A fermentation-defoaming tandem system was developed to resolve the problems of foaming and medium overflow during scale-up. Finally, the titer of rhamnolipid reached 60 g/l and the yield reached 80% in a 300 l fermentation-defoaming tandem system.

CONCLUSIONS

The work reveals the potential for producing high-performance rhamnolipids from renewable resources on a large scale.

Bioconversion of agro-industrial by-products in rhamnolipids toward applications in enhanced oil recovery and bioremediation

In this work, biosurfactant production by a Pseudomonas aeruginosa strain was optimized using low-cost substrates. The highest biosurfactant production (3.2 g/l) was obtained using a culture medium containing corn steep liquor (10% (v/v)) and molasses (10% (w/v)). The biosurfactant reduced the surface tension of water up to 30 mN/m, and exhibited a high emulsifying activity (E24=60%), with a critical micelle concentration as low as 50 mg/l. The biosurfactant produced in this alternative medium was characterized as a mixture of eight different rhamnolipid congeners, being the most abundant the mono-rhamnolipid Rha-C10-C10. However, using LB medium, nine different rhamnolipid congeners were identified, being the most abundant the di-rhamnolipid Rha-Rha-C10-C10. The rhamnolipid mixture produced in the alternative medium exhibited a better performance in removing oil from contaminated sand when compared with two chemical surfactants, suggesting its potential use as an alternative to traditional chemical surfactants in enhanced oil recovery or bioremediation.

Lipopeptide biosurfactant from Bacillus clausii BS02 using sunflower oil soapstock: evaluation of high throughput screening methods, production, purification, characterization and its insecticidal activity

Production, purification and characterization of a lipopeptide biosurfactant (surfactin) fromBacillus clausiiBS02 for biocontrol activity against pulse beetles and mealybugs.

Cost effective technologies and renewable substrates for biosurfactants' production

Diverse types of microbial surface active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant/bioemulsifier (BS/BE) as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of BS industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates, and fermentation technology in BS/BE production processes and their role in reducing the production cost.

Production and characterisation of glycolipid biosurfactant by Halomonas sp. MB-30 for potential application in enhanced oil recovery

Biosurfactant-producing Halomonas sp. MB-30 was isolated from a marine sponge Callyspongia diffusa, and its potency in crude oil recovery from sand pack column was investigated. The biosurfactant produced by the strain MB-30 reduced the surface tension to 30 mN m(-1) in both glucose and hydrocarbon-supplemented minimal media. The critical micelle concentration of biosurfactant obtained from glucose-based medium was at 0.25 mg ml(-1) at critical micelle dilution 1:10. The chemical structure of glycolipid biosurfactant was characterised by infrared spectroscopy and proton magnetic resonance spectroscopy. The emulsification activity of MB-30 biosurfactant was tested with different hydrocarbons, and 93.1 % emulsification activity was exhibited with crude oil followed by kerosene (86.6 %). The formed emulsion was stable for up to 1 month. To identify the effectiveness of biosurfactant for enhanced oil recovery in extreme environments, the interactive effect of pH, temperature and salinity on emulsion stability with crude oil and kerosene was evaluated. The stable emulsion was formed at and above pH 7, temperature >80 °C and NaCl concentration up to 10 % in response surface central composite orthogonal design model. The partially purified biosurfactant recovered 62 % of residual crude oil from sand pack column. Thus, the stable emulsifying biosurfactant produced by Halomonas sp. MB-30 could be used for in situ biosurfactant-mediated enhanced oil recovery process and hydrocarbon bioremediation in extreme environments.

Rhamnolipids as emulsifying agents for essential oil formulations: antimicrobial effect against Candida albicans and methicillin-resistant Staphylococcus aureus

This work examines the influence of essential oil composition on emulsification with rhamnolipids and their use as therapeutic antimicrobial agents against two opportunistic pathogens, methicillin-resistant Staphylococcus aureus (MRSA) and Candida albicans. Rhamnolipids, produced by Pseudomonas aeruginosa, with waste frying oil as the carbon source, were composed of eight rhamnolipid homologues. The rhamnolipid mixture was used to produce emulsions containing essential oils (EOs) of Melaleuca alternifolia, Cinnamomum verum, Origanum compactum and Lavandula angustifolia using the titration method. Ternary phase diagrams were designed to evaluate emulsion stability, which differed depending on the essential oil. The in vitro antimicrobial activity of the EOs alone and the emulsions was evaluated. The antimicrobial activity presented by the essential oils alone increased with emulsification. The surface properties of rhamnolipids contribute to the positive dispersion of EOs and thus increase their availability and antimicrobial activity against C. albicans and S. aureus. Therefore, rhamnolipid-based emulsions represent a promising approach to the development of EO delivery systems.

Rhamnolipids Production by a Pseudomonas eruginosa LBI Mutant: Solutions and Homologs Characterization

This paper evaluates the effect of additives (NaCl and ethanol) on the solution properties of rhamnolipids. The properties are the surface activity, aggregate formations and emulsifying activity as well as the synergistic effects of additives and pH variations on the physical properties of rhamnolipids. Additionally, analysis of fatty acids and rhamnolipid homologues produced using different carbon sources was performed by mass spectrometry. The results indicate that this biosurfactant maintain its properties in the presence of additives. NaCl decreases the size and number of aggregates formed in solutions without pH control, while ethanol to rhamnolipid solutions reduces critical micelle concentration and favors aggregation of monomers. The profiles of fatty acids produced by P. aeruginosa LBI 2A1 varied according to the carbon source used, however for rhamnolipids there was no difference.

Rhamnolipids elicit the same cytotoxic sensitivity between cancer cell and normal cell by reducing surface tension of culture medium

Biosurfactant rhamnolipids have been claimed to show biological activities of inhibiting the proliferation of cancer cells. In this study, the cytotoxicity of rhamnolipids was examined on four cancer cells (HepG2, Caco-2, Hela, MCF-7 cells) and two normal cells (HK-2 cell, primary hepatocyte). Interestingly, both cancer cells and normal cells exhibited similar sensitivities to the addition of rhamnolipids in culture medium, and the cytotoxicity was largely attenuated by the presence of fetal bovine serum (FBS) in culture medium. In correlation of the mono-/di-rhamnolipid cytotoxicity with the surface tension of culture medium, it was found that rhamnolipids triggered cytotoxicity whenever the surface tension of culture medium decreased below 41 mN/m irrespective of the FBS content in culture medium, cell line, or rhamnolipid congener. Similarly, each chemical surfactant (Tween-80, sodium dodecyl sulfate, and sodium dodecyl benzene sulfonate) could cause cytotoxicity on HepG2 cells whenever its addition made the surface tension under 41 mN/m in culture medium with or without the presence of FBS. It seems that rhamnolipids, like chemical surfactants, exhibited cytotoxicity by reducing the surface tension of culture medium rather than by changing its specific molecular structure, which had no selection on tumor cells. This study could offer helps to correct the misleading biological activity of rhamnolipids and to avoid the possible large wastes of time and expenses on developing the applications in antitumor drugs.

Antimicrobial and antibiofilm potential of biosurfactants isolated from lactobacilli against multi-drug-resistant pathogens

Background

Biosurfactants (BS) are amphiphilic compounds produced by microbes, either on the cell surface or secreted extracellularly. BS exhibit strong antimicrobial and anti-adhesive properties, making them good candidates for applications used to combat infections. In this study, our goal was to assess the in vitro antimicrobial, anti-adhesive and anti-biofilm abilities of BS produced by Lactobacillus jensenii and Lactobacillus rhamnosus against clinical Multidrug Resistant (MDR) strains of Acinetobacter baumannii, Escherichia coli, and Staphylococcus aureus (MRSA). Cell-bound BS from both L. jensenii and L. rhamnosus were extracted and isolated. The surface activities of crude BS samples were evaluated using an oil spreading assay. The antimicrobial, anti-adhesive and anti-biofilm activities of both BS against the above mentioned MDR pathogens were determined.

Results

Surface activities for both BS ranged from 6.25 to 25 mg/ml with clear zones observed between 7 and 11 cm. BS of both L. jensenii and L. rhamnosus showed antimicrobial activities against A. baumannii, E. coli and S. aureus at 25-50 mg/ml. Anti-adhesive and anti-biofilm activities were also observed for the aforementioned pathogens between 25 and 50 mg/ml. Finally, analysis by electron microscope indicated that the BS caused membrane damage for A. baumannii and pronounced cell wall damage in S. aureus.

Conclusion

Our results indicate that BS isolated from two Lactobacilli strains has antibacterial properties against MDR strains of A. baumannii, E. coli and MRSA. Both BS also displayed anti-adhesive and anti-biofilm abilities against A. baumannii, E. coli and S. aureus. Together, these capabilities may open up possibilities for BS as an alternative therapeutic approach for the prevention and/or treatment of hospital-acquired infections.

Uptake and trans-membrane transport of petroleum hydrocarbons by microorganisms

Petroleum-based products are a primary energy source in the industry and daily life. During the exploration, processing, transport and storage of petroleum and petroleum products, water or soil pollution occurs regularly. Biodegradation of the hydrocarbon pollutants by indigenous microorganisms is one of the primary mechanisms of removal of petroleum compounds from the environment. However, the physical contact between microorganisms and hydrophobic hydrocarbons limits the biodegradation rate. This paper presents an updated review of the petroleum hydrocarbon uptake and transport across the outer membrane of microorganisms with the help of outer membrane proteins.

Siloxanes removal from biogas by a lab-scale biotrickling filter inoculated with Pseudomonas aeruginosa S240

Removing volatile methyl siloxanes (VMSs) from biogas remains a longstanding challenge in the field of biological process due to their low bioavailability and biodegradation. To address this issue, a lab-scale aerobic biotrickling filter, packed with porous lava and inoculated with an effective strain of Pseudomonas aeruginosa, was developed and its performance for octamethylcyclotetrasiloxane (D4, selected as a model VMS) removal from an aerobic synthetic gas was monitored. The biotrickling filter exhibited a relatively high removal efficiency over 74% at empty bed residence time of 13.2 min. Rhamnolipids, biosurfactants produced by P. aeruginosa, were identified in the liquid phase of the biotrickling filter by HPLC-MS and ATR-FTIR, and they were found to be the main factor of improving D4 removal. Moreover, dimethylsilanediol, methanol, silicic acid in the liquid phase and carbon dioxide in the gas phase, as the biodegradation products of D4, were determined by GC-MS, silicic acid analysis and non-dispersive infrared analysis. To our knowledge, it is the first time to report the existence of methanol in the D4 degradation products. Finally, a metabolic pathway for D4 degradation by P. aeruginosa was proposed based on our results.

Multi-response optimization of rhamnolipid production using grey rational analysis in Taguchi method

•

Optimization of rhamnolipid production under integrated Taguchi design and GRA.

•

The results were analyzed by using grey relational analysis.

•

In doing this, volumetric productivity of the process improved by 142%.

•

Total sugars concentration was the most influencing parameter.

•

This is a biocompatible production via sustainable technology.

The present paper envisages the multi-response optimization of certain process parameters like total sugars concentration, C/N ratio and incubation time on rhamnolipid yield, surface tension reduction, biomass formation and substrate utilization, in rhamnolipid production by a Pseudomonas aeruginosa mutant strain grown on clarified blackstrap molasses, under L₉ orthogonal array in Taguchi design. The results have been analyzed by using grey relational analysis for the identification of an optimum level of process parameters. The validity of the results was checked though confirmation experiment, under grey relational analysis. Subsequently, the rhamnolipid yield improved from 1.45 to 1.50 g/L, substrate utilization reduced from 26 to 14% (w/v) and lesser biomass was formed. Moreover, the volumetric productivity of the process improved from 0.0086 to 0.0208 g/L/h by 142%. Furthermore, using analysis of variance method, significant contributions of process parameters were determined.

Best conditions for biodegradation of diesel oil by chemometric tools

Diesel oil biodegradation by different bacteria-yeast-rhamnolipids consortia was tested. Chromatographic analysis of post-biodegradation residue was completed with chemometric tools (ANOVA, and a novel ranking procedure based on the sum of ranking differences). These tools were used in the selection of the most effective systems. The best results of aliphatic fractions of diesel oil biodegradation were observed for a yeast consortia with Aeromonas hydrophila KR4. For these systems the positive effect of rhamnolipids on hydrocarbon biodegradation was observed. However, rhamnolipids addition did not always have a positive influence on the biodegradation process (e.g. in case of yeast consortia with Stenotrophomonas maltophila KR7). Moreover, particular differences in the degradation pattern were observed for lower and higher alkanes than in the case with C22. Normally, the best conditions for "lower" alkanes are Aeromonas hydrophila KR4 + emulsifier independently from yeasts and e.g. Pseudomonas stutzeri KR7 for C24 alkane.

Bioactive compound from Pseudomonas synxantha inhibits the growth of Mycobacteria

Tuberculosis is a dreaded disease and the current situation demands new anti-tubercular agent(s) for the management of public health. Towards this direction, we obtained a contaminant organism on a Mycobacterium smegmatis lawn having growth inhibitory activity against the later. In the current study, efforts were targeted to identify this organism and characterize the bioactive compound from this isolate that inhibited the growth of Mycobacteria. The result revealed that the organism is a strain of Pseudomonas synxantha. Biophysical analyses including (1)H and (13)C NMR, ESI-mass spectroscopy, FTIR showed that the bioactive compound is a long chain aliphatic hydrocarbon with a terminal alyl bond and intermediate electronegative atom. The compound exhibited strong growth inhibitory activities against M. smegmatis and Mycobacterium tuberculosis strains H37Ra, H37Rv and BCG. Further experiments showed that both P. synxantha and its secretory metabolites are capable of inducing hemolysis of human blood. Thus the results of this study clearly indicate that the bioactive compound produced by P. Synxantha has biosurfactant activities as well as anti-myco-bacterial properties.

Structural characterization of rhamnolipid produced by Pseudomonas aeruginosa strain FIN2 isolated from oil reservoir water

Biosurfactant-producing microorganisms inhabiting oil reservoirs are of great potential in industrial applications. Yet, till now, the knowledge about the structure and physicochemical property of their metabolites are still limited. The aim of this study was to purify and structurally characterize the biosurfactant from Pseudomonas aeruginosa strain FIN2, a newly isolated strain from an oil reservoir. The purification was conducted by silica gel column chromatography followed by pre-RP HPLC and the structural characterization was carried out by GC-MS combined with MS/MS. The results show that the biosurfactant produced by FIN2 is rhamnolipid in nature and its four main fractions were identified to be Rha-C10-C10(46.1 %), Rha-Rha-C10-C10(20.1 %), Rha-C8-C10 (7.5 %) and Rha-C10-C12:1(5.5 %), respectively. Meanwhile, the rarely reported rhamnolipid congeners containing β-hydroxy fatty acids of C6, C9, C10:1 and C11 were also proved to be present in the rhamnolipid mixture produced. The rhamnolipid mixture exhibited a strong surface activity by lowering the surface tension of distilled water to 28.6 mN/m with a CMC value of 195 mg/l.

Biological Activities of a Mixture of Biosurfactant from Bacillus subtilis and Alkaline Lipase from Fusarium oxysporum

In this study, we investigate the antimicrobial effects of a mixture of a biosurfactant from Bacillus subtilis and an alkaline lipase from Fusarium oxysporum (AL/BS mix) on several types of microorganisms, as well as their abilities to remove Listeria innocua ATCC 33093 biofilm from stainless steel coupons. The AL/BS mix had a surface tension of around 30 mN.m^-1, indicating that the presence of alkaline lipase did not interfere in the surface activity properties of the tensoactive component. The antimicrobial activity of the AL/BS mix was determined by minimum inhibitory concentration (MIC) micro-assays. Among all the tested organisms, the presence of the mixture only affected the growth of B. subtilis CCT 2576, B. cereus ATCC 10876 and L. innocua. The most sensitive microorganism was B. cereus (MIC 0.013 mg.mL^-1). In addition, the effect of the sanitizer against L. innocua attached to stainless steel coupons was determined by plate count after vortexing. The results showed that the presence of the AL/BS mix improved the removal of adhered cells relative to treatment done without the sanitizer, reducing the count of viable cells by 1.72 log CFU.cm^-2. However, there was no significant difference between the sanitizers tested and an SDS detergent standard (p<0.05).

Produção de biossurfactante por Chromobacterium violaceum ATCC 12472 utilizando milhocina e óleo de milho pós-fritura como nutrientes

O interesse em surfactantes de origem microbiana tem aumentado consideravelmente nos últimos anos. A preocupação ambiental entre os consumidores, combinada às novas legislações de controle do meio ambiente, aumentou a procura por surfactantes naturais em substituição aos derivados petroquímicos. Os surfactantes microbianos têm sido testados em muitas aplicações ambientais e industriais, como na biorremediação, na dispersão de manchas oleosas e na recuperação de petróleo, substituindo os surfactantes químicos. Além disso, também podem ser utilizados nas indústrias de alimentos, cosméticos, detergentes e na agricultura. Neste trabalho foi produzido biossurfactante por Chromobacterium violaceum ATCC 12472, utilizando nutrientes de baixo valor agregado. A tensão superficial do biossurfactante produzido por C. violaceum ATCC 12472 teve valores entre 29 e 40 mN/m. O melhor resultado foi observado no ensaio 8 (milhocina 8,0%, lactose 1,0% e óleo de milho pós-fritura 7,5%) do planejamento fatorial, com 72 horas de fermentação, reduzindo a tensão superficial da água de 71 para 29 mN/m. Os melhores resultados do índice (E24) e da atividade de emulsificação (UEA) foram observados no ponto central, sendo utilizados para ambos os métodos o óleo de milho, que resultou no E24 de 2% e atividade com valores acima de 6 UAE. Os resultados obtidos demonstram o elevado potencial de C. violaceum na produção de um promissor biossurfactante.

A comparison of effects of broad-spectrum antibiotics and biosurfactants on established bacterial biofilms

Current antibiofilm solutions based on planktonic bacterial physiology have limited efficacy in clinical and occasionally environmental settings. This has prompted a search for suitable alternatives to conventional therapies. This study compares the inhibitory properties of two biological surfactants (rhamnolipids and a plant-derived surfactant) against a selection of broad-spectrum antibiotics (ampicillin, chloramphenicol and kanamycin). Testing was carried out on a range of bacterial physiologies from planktonic and mixed bacterial biofilms. Rhamnolipids (Rhs) have been extensively characterised for their role in the development of biofilms and inhibition of planktonic bacteria. However, there are limited direct comparisons with antimicrobial substances on established biofilms comprising single or mixed bacterial strains. Baseline measurements of inhibitory activity using planktonic bacterial assays established that broad-spectrum antibiotics were 500 times more effective at inhibiting bacterial growth than either Rhs or plant surfactants. Conversely, Rhs and plant biosurfactants reduced biofilm biomass of established single bacterial biofilms by 74-88 and 74-98 %, respectively. Only kanamycin showed activity against biofilms of Bacillus subtilis and Staphylococcus aureus. Broad-spectrum antibiotics were also ineffective against a complex biofilm of marine bacteria; however, Rhs and plant biosurfactants reduced biofilm biomass by 69 and 42 %, respectively. These data suggest that Rhs and plant-derived surfactants may have an important role in the inhibition of complex biofilms.

Engineering PQS biosynthesis pathway for enhancement of bioelectricity production in pseudomonas aeruginosa microbial fuel cells

The biosynthesis of the redox shuttle, phenazines, in Pseudomonas aeruginosa, an ubiquitous microorganism in wastewater microflora, is regulated by the 2-heptyl-3,4-dihydroxyquinoline (PQS) quorum-sensing system. However, PQS inhibits anaerobic growth of P. aeruginosa. We constructed a P. aeruginosa strain that produces higher concentrations of phenazines under anaerobic conditions by over-expressing the PqsE effector in a PQS negative ΔpqsC mutant. The engineered strain exhibited an improved electrical performance in microbial fuel cells (MFCs) and potentiostat-controlled electrochemical cells with an approximate five-fold increase of maximum current density relative to the parent strain. Electrochemical analysis showed that the current increase correlates with an over-synthesis of phenazines. These results therefore demonstrate that targeting microbial cell-to-cell communication by genetic engineering is a suitable technique to improve power output of bioelectrochemical systems.

Chemical structure and in vitro antitumor activity of rhamnolipids from Pseudomonas aeruginosa BN10

A newly isolated indigenous strain BN10 identified as Pseudomonas aeruginosa was found to produce glycolipid (i.e., rhamnolipid-type) biosurfactants. Two representative rhamnolipidic fractions, RL-1 and RL-2, were separated on silica gel columns and their chemical structure was elucidated by a combination of nuclear magnetic resonance and mass spectroscopy. Subsequently, their cytotoxic effect on cancer cell lines HL-60, BV-173, SKW-3, and JMSU-1 was investigated. RL-1 was superior in terms of potency, causing 50 % inhibition of cellular viability at lower concentrations, as compared to RL-2. Furthermore, the results from fluorescent staining analysis demonstrated that RL-1 inhibited proliferation of BV-173 pre-B human leukemia cells by induction of apoptotic cell death. These findings suggest that RL-1 could be of potential for application in biomedicine as a new and promising therapeutic agent.

Structural Elucidation and Surfactant Properties of Rhamnolipids Synthesized by Pseudomonas aeruginosa (ATCC 10145) on Sweet Water as Carbon Source and Stabilization Effect on Foam Produced by Sodium Lauryl Sulfate

The interest in biosurfactant has increased considerably due to their large potential for industrial applications. Rhamnolipid is the simplest class of biosurfactants with well defined structure. The main obstacle in commercialization of biosurfactant especially rhamnolipids is the higher cost of the production that can be reduced by use of inexpensive carbon substrates like glycerol that is readily available from commercial fat-splitting process in the form of sweet water (up to 20% w/v) at very low cost. The composition and structure of various components in crude rhamnolipids synthesized by of Pseudomonas aeruginosa (ATCC 10145) on sweet water, were determined using TLC, HPLC and LC\MS. The crude product showed two distinct components having structure Rha2C10C10 and Rha2C10C12 at 85.45 wt.% and 14.55 wt.% respectively. The Rha2C10C10 was more efficient and effective in surface tension reduction up to 23.5 mN/m than other components. Crude rhamnolipids showed better emulsifying power than its individual components. The crude rhamnolipids showed better foam stability than sodium lauryl sulfate (SLS) at lower concentrations (0.05 to 0.002% w/v). It also enhanced and stabilized the foam produced by SLS at 0.01 to 0.025% of rhamnolipids.

A PM-IRRAS investigation of monorhamnolipid orientation at the air-water interface

The rhamnolipid biosurfactants have been considered as possible "green" alternatives to synthetic surfactants due to their greater compatibility with the environment and excellent surface active properties. In order to understand the molecular orientation of rhamnolipids at the air-water interface, a new monorhamnolipid with two octadecyl chains, Rha-C18-C18, has been studied at the air-water interface with polarization modulated-infrared reflection absorption spectroscopy (PM-IRRAS). Since rhamnolipids possess a carboxylic acid, and hence exhibit pH-dependent properties, their water surface orientation is studied in solutions of pH 2, 5, and 8. Rhamnolipids have also been reported to form strong complexes with Pb(2+); thus, the effect of the presence of Pb(2+) on molecular orientation at the interface is also investigated. PM-IRRA spectra indicate an increase in alkyl chain order and a decrease in alkyl chain tilt angle as the surface pressure of the monolayer increases, with pH-independent tilt angles ranging from 63° to 45°. Molecular modeling using Spartan provides insight into the cause of this large tilt angle as being due to the nature of the monorhamnolipid packing at the air-water interface as dictated by its large hydrophilic headgroup.

Study of Glycerol Residue as a Carbon Source for Production of Rhamnolipids by Pseudomonas aeruginosa (ATCC 10145)

Rhamnolipid is the simplest class of biosurfactants with a well defined structure. The main obstacle in commercialization of biosurfactant especially rhamnolipids is the higher cost of the production. The production cost can be reduced by using economical carbon sources. Glycerol residue is available from glycerin distillation plant at low cost. It can be used as carbon source for rhamnolipid production using Pseudomonas aeruginosa (ATCC 10145). The optimum concentration of glycerol residue was 5% weight by volume (w/v) yielding maximum rhamnolipids at 2.50 g/L in the broth. From batch monitoring of polyglycerol and monoglycerol consumption, it appeared that polyglycerols were first hydrolyzed to monoglycerol in the broth itself and consumed as carbon source. The product had components similar to rhamnolipids synthesized on pure glycerol under the same conditions. This indicated the potential of glycerol residue as economic substrate for production of rhamnolipids.

Study of Glycerol and Sweet Water as a Carbon Source for Production of Rhamnolipids by Naturally Occurring Strains of Pseudomonas aeruginosa (ATCC 10145 and ATCC 9027)

The interest in biosurfactant has increased considerably due to their large potential for industrial applications. Rhamnolipid is a simplest class of biosurfactants with well defined structure. The main obstacle in commercialization of biosurfactant especially rhamnolipids is the higher cost of the production. Glycerol is readily available from commercial fat-splitting process in the form of sweet water (up to 20% w/v) at very low cost. Two natural strains of Pseudomonas aeruginosa (ATCC 10145 and ATCC 9027) were compared for rhamnolipid production. The neotype strain of Pseudomonas aeruginosa (ATCC 10145) was found to produce more amounts of rhamnolipids than Pseudomonas aeruginosa (ATCC 9027) on glucose and glycerol as carbon source. The microbial growth (0.94 g/L) and formation of rhamnolipids (2.75 g/L) was maximum at 5% (w/v) glycerol concentration by Pseudomonas aeruginosa (ATCC 10145). The fermentation was monitored for 8 days on shake flask and magnetically stirred batch culture. In magnetically stirred batch culture, microbial growth was 0.69 g/L and 2.73 g/L of rhamnolipid was formed. Sweet water was also used as a source of glycerol.

Biosurfactants as Antimicrobial Ingredients for Cleaning Products and Cosmetics

A considerable number of biosurfactants have been investigated for their antibacterial, antifungal or antiviral activity that is mostly based on the ability to destroy microbial cell membranes. In addition, some of them are also able to inhibit the adhesion of microorganisms to surfaces and tissues. Although these antimicrobial properties can be generally explained by a strong detergency effect, there are further mechanisms, such as the interaction with membrane phospholipids or the alteration of the electrical conductance of membranes, resulting in the damage of microbial cells. Typically, antimicrobially active biosurfactants are glycolipids (e.g. rhamnolipids) or cyclic lipopeptides (e.g. Polymyxin). Since most of these substances were not available in larger quantities in the past, their potential applications in cleaners and cosmetics was not studied intensely, however, their versatility and the possibility of combining different properties, such as cleaning and antimicrobial effects, suggest a further consideration of biosurfactants even for mass-market products.

Production and characterization of rhamnolipid biosurfactant from waste frying coconut oil using a novel Pseudomonas aeruginosa D

AIM

To improve biosurfactant production economics by the utilization of potential low-cost materials.

METHODS AND RESULTS

In an attempt to utilize cost-effective carbon sources in the fermentative production of biosurfactants, various pure and waste frying oils were screened by a standard biosurfactant producing strain. Considering the regional significance, easy availability and the economical advantages, waste frying coconut oil was selected as the substrate for further studies. On isolation of more competent strains that could use waste frying coconut oil efficiently as a carbon source, six bacterial strains were isolated on cetyltrimethyl ammonium bromide-methylene blue agar plate, from a soil sample collected from the premises of a coconut oil mill. Among these, Pseudomonas aeruginosa D was selected as the potential producer of rhamnolipid. Spectrophotometric method, TLC, methylene blue active substance assay, drop collapse technique, surface tension measurement by Du Nouy ring method and emulsifying test confirmed the rhamnolipid producing ability of the selected strain and various process parameters were optimized for the production of maximum amount of biosurfactant. Rhamnolipid components purified and separated by ethyl acetate extraction, preparative silica gel column chromatography, HPLC and TLC were characterized by fast atom bombardment mass spectrometry as a mixture of dirhamnolipids and monorhamnolipids. The rhamnolipid homologues detected were Rha-Rha-C(10) -C(10) , Rha-C(12) -C(10) and Rha-C(10) -C(8) /Rha-C(8) -C(10) .

CONCLUSION

These results indicated the possibility of waste frying coconut oil to be used as a very effective alternate substrate for the economic production of rhamnolipid by a newly isolated Ps. aeruginosa D.

SIGNIFICANCE AND IMPACT OF THE STUDY

Results of this study throws light on the alternate use of already used cooking oil as high-energy source for producing a high value product like rhamnolipid. This would provide options for the food industry other than the recycling and reuse of waste frying oils in cooking and also furthering the value of oil nuts.