Encapsulation of Tea Polyphenol in Zein through Complex Coacervation Technique to Control the Release of the Phenolic Compound from Gelatin-Zein Composite Film

Green tea polyphenol (TP) was encapsulated in zein and fabricated into a gelatin-zein composite film by complex coacervation. Transglutaminase (TG) crosslinking was employed to obtain a compact structural orientation of the film to prolong the release of bioactive compounds. The encapsulation efficiency of zein and the TP release rate from the composite film were investigated. The retention rate was over 30% and 80% after film fabrication and storage, respectively. Crosslinking decreased the diffusion coefficient by half, thus improving the release of TP from the film. The antioxidant properties were satisfactory after discharge from the film detected by DPPH/ABTS scavenging. The value of crosslinking degree (~60%) and increased molecular weight of the protein were investigated by SDS-PAGE, indicating the compatibility of TP and TG treatment. According to physicomechanical findings, the TG2TP1 film exhibited the best characteristics. Tensile strength and water solubility properties were ameliorated by the TG treatment of TP-encapsulated films compared to the control film. TG and TP-loaded gelatin-zein composite film had better thermal stability than the control film. Moreover, the TP loading reduced the transparency value and improved the light-barrier properties of the film. The films showed significant antimicrobial activities against two food-borne bacteria, including Staphylococcus aureus BCTC13962 and Escherichia coli BCRC10675. The result obtained shows that the encapsulation of TP and TG treatment may be used to fabricate gelatin-zein composite film with controlled release of phenolic compounds for active packaging applications.

An Overview of the Health Benefits, Extraction Methods and Improving the Properties of Pomegranate

Pomegranate (Punica granatum L.) is a polyphenol-rich edible food and medicinal plant of ancient origin, containing flavonols, anthocyanins, and tannins, with ellagitannins as the most abundant polyphenols. In the last decades, its consumption and scientific interest increased, due to its multiple beneficial effects. Pomegranate is a balausta fruit, a large berry surrounded by a thick colored peel composed of exocarp and mesocarp with edible arils inside, from which the pomegranate juice can be produced by pressing. Seeds are used to obtain the seed oil, rich in fatty acids. The non-edible part of the fruit, the peel, although generally disposed as a waste or transformed into compost or biogas, is also used to extract bioactive products. This review summarizes some recent preclinical and clinical studies on pomegranate, which highlight promising beneficial effects in several fields. Although further insight is needed on key aspects, including the limited oral bioavailability and the role of possible active metabolites, the ongoing development of suitable encapsulation and green extraction techniques enabling the valorization of waste pomegranate products point to the great potential of pomegranate and its bioactive constituents as dietary supplements or adjuvants in therapies of cardiovascular and non-cardiovascular diseases.

A Review on Biopolymer-Based Biodegradable Film for Food Packaging: Trends over the Last Decade and Future Research

In recent years, much attention has been paid to the use of biopolymers as food packaging materials due to their important characteristics and properties. These include non-toxicity, ease of availability, biocompatibility, and biodegradability, indicating their potential as an alternative to conventional plastic packaging that has long been under environmental scrutiny. Given the current focus on sustainable development, it is imperative to develop studies on biopolymers as eco-friendly and sustainable food packaging materials. Therefore, the aim of this review is to explore trends and characteristics of biopolymer-based biodegradable films for food packaging, analyze the contribution of various journals and cooperation between countries, highlight the most influential authors and articles, and provide an overview of the social, environmental, and economic aspects of biodegradable films for food packaging. To achieve this goal, a bibliometric analysis and systematic review based on the PRISMA method were conducted. Relevant articles were carefully selected from the Scopus database. A bibliometric analysis was also conducted to discuss holistically, comprehensively, and objectively biodegradable films for food packaging. An increasing interest was found in this study, especially in the last 3 years with Brazil and China leading the number of papers on biodegradable films for food packaging, which were responsible for 20.4% and 12.5% of the published papers, respectively. The results of the keyword analysis based on the period revealed that the addition of bioactive compounds into packaging films is very promising because it can increase the quality and safety of packaged food. These results reveal that biodegradable films demonstrate a positive and promising trend as food packaging materials that are environmentally friendly and promote sustainability.

Oxidative Stability of Avocado Snacks Formulated with Olive Extract as an Active Ingredient for Novel Food Production

Analysis of the oxidative stability of novel avocado chips with added natural extracts was carried out with the aim of reducing the chemical additive content in their formulation. Two different natural extracts were initially evaluated and characterized: one obtained from olive pomace (OE) and other from pomegranate seed waste. OE was selected due to its better antioxidant potential according to FRAP, ABTS, and DPPH assays as well as its higher total phenolic content. The formulations used were 0, 1.5 wt.%, and 3 wt.% of OE. A gradual disappearance of the band found around 3009 cm^-1 and related to unsaturated fatty acids was observed in the control sample in contrast to formulations with added OE. The band observed near 3299 cm^-1 widened and intensified with time due to the oxidation degree of samples, with this effect being higher in the control chips. The observed changes in fatty acid and hexanal content with storage time underlined the higher extent of oxidation in the control samples. This fact could suggest an antioxidant protectant action of OE in avocado chips during thermal treatment, which was attributed to the presence of phenolic compounds. The obtained chips incorporating OE represent a viable option for the development of a natural, healthy, and clean-label avocado snack at competitive cost and with low environmental impacts.

The influence of non-thermal technologies on color pigments of food materials: An updated review

The color of any food is influenced by several factors, such as food attributes (presence of pigments, maturity, and variety), processing methods, packaging, and storage conditions. Thus, measuring the color profile of food can be used to control the quality of food and examine the changes in chemical composition. With the advent of non-thermal processing techniques and their growing significance in the industry, there is a demand to understand the effects of these technologies on various quality attributes, including color. This paper reviews the effects of novel, non-thermal processing technologies on the color attributes of processed food and the implications on consumer acceptability. The recent developments in this context and a discussion on color systems and various color measurement techniques are also included. The novel non-thermal techniques, including high-pressure processing, pulsed electric field, ultrasonication, and irradiation which employ low processing temperatures for a short period, have been found effective. Since food products are processed at ambient temperature by subjecting them to non-thermal treatment for a very short time, there is no possibility of damage to heat-sensitive nutrient components in the food, any deterioration in the texture of the food, and any toxic compounds in the food due to heat. These techniques not only yield higher nutritional quality but are also observed to maintain better color attributes. However, suppose foods are exposed to prolonged exposure or processed at a higher intensity. In that case, these non-thermal technologies can cause undesirable changes in food, such as oxidation of lipids and loss of color and flavor. Developing equipment for batch food processing using non-thermal technology, understanding the appropriate mechanisms, developing processing standards using non-thermal processes, and clarifying consumer myths and misconceptions about these technologies will help promote non-thermal technologies in the food industry.

Enhancing the shelf life of chevon Seekh Kabab using chitosan edible film and Cinnamomum zeylanicum essential oil

Chevon Seekh Kabab is a popular meat product of India. However, due to high protein and moisture content it undergoes quick microbial spoilage and oxidative reactions leading to lower shelf life. The combination of chitosan edible film and cinnamon essential oil (CEO) was chosen to remediate this problem because of its antimicrobial and antioxidative effect. Control and chitosan edible film with CEO coated chevon Seekh Kabab samples were stored at 4 °C. The physicochemical (pH, TBARS, TVBN, moisture, colour), microbiological (APC, psychrophilic, coliform and Staphylococcal count) and sensory attributes were evaluated over a 30 days period. The maximum shelf life of 27 days was observed when 2% chitosan edible film with 0.3% CEO was coated over samples. A reduction in moisture, L* value, a* value and sensory scores along with an increase in pH, TVBN, TBARS, b* value and microbiological parameters were observed during the storage period. Reaction kinetics for the physicochemical and microbiological parameters was also established. The physicochemical, microbiological and sensory parameters were within prescribed limits till spoilage in the treated sample. This investigation may aid researchers working on scaling up of processing and preservation of Seekh Kabab.

Synthetic and natural antimicrobials as a control against food borne pathogens: A review

Food borne pathogens are one of the most common yet concerning cause of illnesses around the globe. These microbes invade the body via food items, through numerous mediums of contamination and it is impossible to completely eradicate these organisms from food. Extensive research has been made regarding their treatment. Unfortunately, the only available treatment currently is by antibiotics. Recent exponential increase in antibiotic resistance and the side effect of synthetic compounds have established a need for alternate therapies that could be utilized either on their own or along with antibiotics to provide protection against food-borne diseases. The aim of this review is to provide information regarding some common food borne diseases, their current and possible natural treatment. It will include details regarding some common foodborne pathogens, the disease they cause, prevalence, manifestations and treatment of the respective disease. Some natural modes of potential treatment will be summarized, which including phytochemicals, derived from plants either as crude extracts or as purified form and Bacteriocins as microbial based treatment, obtained from various types of bacteria. The paper will describe their mechanism of action, classification, susceptible organisms, some antimicrobial compounds and producing organisms, application in food systems and as potential treatment. Along with that, synthetic treatment i.e., antibiotics will be discussed including the first-line treatment of some common food borne infections, prevalence and mechanism of resistance against antibiotics in the pathogens.

Betalains as promising natural colorants in smart/active food packaging

Betalains are water-soluble nitrogen pigments with beneficial effects, including antioxidant, antimicrobial, and pH-indicator properties. The development of packaging films incorporated with betalains has received increasing attention because of pH-responsive color-changing properties in the colorimetric indicators and smart packaging films. As such, intelligent and active packaging systems based on biodegradable polymers containing betalains have been recently developed as eco-friendly packaging to enhance the quality and safety of food products. Betalains could generally improve the functional properties of packaging films, such as higher water resistance, tensile strength, elongation at break, and antioxidant and antimicrobial activities. These effects are dependent on betalain composition (about its source and extraction), content, and the kind of biopolymer, film preparation method, food samples, and storage time. This review focused on betalains-rich films as pH- and ammonia-sensitive indicators and their applications as smart packaging to monitor the freshness of protein-rich foods such as shrimp, fish, chicken, and milk.

Potential of Essential Oils in the Control of Listeria monocytogenes

Listeria monocytogenes is a foodborne pathogen, the causative agent of listeriosis. Infections typically occur through consumption of foods, such as meats, fisheries, milk, vegetables, and fruits. Today, chemical preservatives are used in foods; however, due to their effects on human health, attention is increasingly turning to natural decontamination practices. One option is the application of essential oils (EOs) with antibacterial features, since EOs are considered by many authorities as being safe. In this review, we aimed to summarize the results of recent research focusing on EOs with antilisterial activity. We review different methods via which the antilisterial effect and the antimicrobial mode of action of EOs or their compounds can be investigated. In the second part of the review, results of those studies from the last 10 years are summarized, in which EOs with antilisterial effects were applied in and on different food matrices. This section only included those studies in which EOs or their pure compounds were tested alone, without combining them with any additional physical or chemical procedure or additive. Tests were performed at different temperatures and, in certain cases, by applying different coating materials. Although certain coatings can enhance the antilisterial effect of an EO, the most effective way is to mix the EO into the food matrix. In conclusion, the application of EOs is justified in the food industry as food preservatives and could help to eliminate this zoonotic bacterium from the food chain.

Production and characterization of sage seed gum bioactive film containing Zataria multiflora essential oil nanoemulsion

A bioactive film with two concentrations of sage seed gum (SSG) (1 % and 1.5 %) incorporating 2 % and 4 % Zataria multiflora essential oil (ZMEO) nanoemulsion was developed. Microbiological evaluation, including disc diffusion and time-kill tests, as well as mechanical and chemical characteristics namely film thickness, water-solubility, water vapor permeability, tensile strength and elongation at break, scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR) analysis, antioxidant activity, and color analysis, were examined. Results showed that the antimicrobial properties of SSG films incorporating ZMEO nanoemulsion increased significantly (P < 0.05) by the multiplication of essential oil concentration. The films with 1 % SSG-4 % ZMEO showed acceptable antioxidant properties (∼65 %), and improved physical properties (508 % thickness increase, 56.63 % water solubility decrease, and 36.85 % water vapor permeability decrease), whereas tensile strength decreased only 29.8 %, and elongation increased 115 %. According to the results, SSG-ZMEO film may have positive potential impacts on increasing the shelf-life of foodstuffs.

Current and emerging applications of saccharide-modified chitosan: a critical review

Chitin, as the main component of the exoskeleton of Arthropoda, is a highly available natural polymer that can be processed into various value-added products. Its most important derivative, i.e., chitosan, comprising β-1,4-linked 2-amino-2-deoxy-β-d-glucose (deacetylated d-glucosamine) and N-acetyl-d-glucosamine units, can be prepared via alkaline deacetylation process. Chitosan has been used as a biodegradable, biocompatible, non-antigenic, and nontoxic polymer in some in-vitro applications, but the recently found potentials of chitosan for in-vivo applications based on its biological activities, especially antimicrobial, antioxidant, and anticancer activities, have upgraded the chitosan roles in biomaterials. Chitosan approval, generally recognized as a safe compound by the United States Food and Drug Administration, has attracted much attention toward its possible applications in diverse fields, especially biomedicine and agriculture. Even with some favorable characteristics, the chitosan's structure should be customized for advanced applications, especially due to its drawbacks, such as low drug-load capacity, low solubility, high viscosity, lack of elastic properties, and pH sensitivity. In this context, derivatization with relatively inexpensive and highly available mono- and di-saccharides to soluble branched chitosan has been considered a "game changer". This review critically reviews the emerging technologies based on the synthesis and application of lactose- and galactose-modified chitosan as two important chitosan derivatives. Some characteristics of chitosan derivatives and biological activities have been detailed first to understand the value of these natural polymers. Second, the saccharide modification of chitosan has been discussed briefly. Finally, the applications of lactose- and galactose-modified chitosan have been scrutinized and compared to native chitosan to provide an insight into the current state-of-the research for stimulating new ideas with the potential of filling research gaps.

In Vitro and In Silico Characterization of Curcumin-Loaded Chitosan-PVA Hydrogels: Antimicrobial and Potential Wound Healing Activity

Curcumin has been used in traditional medicine forages. The present study aimed to develop a curcumin-based hydrogel system and assess its antimicrobial potential and wound healing (WH) activity on an invitro and in silico basis. A topical hydrogel was prepared using chitosan, PVA, and Curcumin in varied ratios, and hydrogels were evaluated for physicochemical properties. The hydrogel showed antimicrobial activity against both gram-positive and gram-negative microorganisms. In silico studies showed good binding energy scores and significant interaction of curcumin components with key residues of inflammatory proteins that help in WH activity. Dissolution studies showed sustained release of curcumin. Overall, the results indicated wound healing potential of chitosan-PVA-curcumin hydrogel films. Further in vivo experiments are needed to evaluate the clinical efficacy of such films for wound healing.

A critical review on protein-based smart packaging systems: Understanding the development, characteristics, innovations, and potential applications

The use of packaging in the food industry is essential to protect food and improve its shelf life. However, traditional packaging, based on petroleum derivatives, presents some problems because it is non-biodegradable and is obtained from nonrenewable sources. In contrast, protein-based smart packaging is presented as an environmentally friendly strategy that also permits obtaining packaging with excellent characteristics for the formation of smart films and coatings. This review aims to summarize recent developments in smart packaging, focusing on edible films/coatings materials, originating from animal and plant protein sources. Various characteristics like mechanical, barrier, functional, sensory, and sustainability of packaging systems are discussed, and the processes used for their development are also described. Moreover, relevant examples of the application of these smart packaging technologies in muscle foods and some innovations in this area are presented. Protein-based films and coatings from plant and animal origins have great potential to enhance food safety and quality, and reduce environmental issues (e.g., plastic pollution and food waste). Some characteristics of the packages can be improved by incorporating polysaccharides, lipids, and other components as antioxidants, antimicrobials, and nanoparticles in protein-based composites. Promising results have been shown in many muscle foods, such as meat, fish, and other seafood. These innovative smart packaging systems are characterized by their renewable and biodegradable nature, and sustainability, among other features that go beyond typical protection barriers (namely, active, functional, and intelligent features). Nonetheless, the utilization of protein-based responsive films and coatings at industrial level still need optimization to be technologically and economically valid and viable.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Silica nanoparticles loaded with caffeic acid to optimize the performance of cassava starch/sodium carboxymethyl cellulose film for meat packaging

Cassava starch/sodium carboxymethyl cellulose (CC) was used as the substrate to create a multipurpose food packaging film, and caffeic acid@silica nanoparticles (C@SNPs) was added. The encapsulation rate of caffeic acid in C@SNPs was 84.7 ± 0.97 %. According to SEM pictures, the nanoparticles were evenly dispersed throughout the film and exhibited good compatibility with the other polymers. C@SNPs was added, which enhanced the physical characteristics of film and decreased its water solubility. The best mechanical and oxygen barrier qualities among them are found in the C@SCC_5:1 film, whose tensile strength rises from 7.17 MPa to 15.44 MPa. The C@SCC_5:1 film has scavenging rates of 95.43 % and 84.67 % against ABTS and DPPH free radicals, respectively, and CA can be released continuously in various food systems. In addition, the antibacterial rate of E. coli O157:H7 and S. aureus of C@SCC_5:1 film in meat was 99.9 %, and it can effectively delay lipid oxidation and pH rise. In conclusion,C@SCC_5:1 film is a new type of antibacterial and antioxidant food packaging material.

Wound Dressings Based on Sodium Alginate-Polyvinyl Alcohol-Moringa oleifera Extracts

Biopolymers have significant pharmaceutical applications, and their blending has favorable characteristics for their pharmaceutical properties compared to the sole components. In this work, sodium alginate (SA) as a marine biopolymer was blended with poly(vinyl) alcohol (PVA) to form SA/PVA scaffolds through the freeze-thawing technique. Additionally, polyphenolic compounds in Moringa oleifera leaves were extracted by different solvents, and it was found that extracts with 80% methanol had the highest antioxidant activity. Different concentrations (0.0-2.5%) of this extract were successfully immobilized in SA/PVA scaffolds during preparation. The characterization of the scaffolds was carried out via FT-IR, XRD, TG, and SEM. The pure and Moringa oleifera extract immobilized SA/PVA scaffolds (MOE/SA/PVA) showed high biocompatibility with human fibroblasts. Further, they showed excellent in vitro and in vivo wound healing capacity, with the best effect noted for the scaffold with high extract content (2.5%).

Development of fish gelatin/carrageenan/zein bio-nanocomposite active-films incorporated with turmeric essential oil and their application in chicken meat preservation

Gelatin/carrageenan (Ge/Car) active packaging films incorporated with turmeric essential oil (TEO) encapsulated in zein nanoparticles (ZNP) were developed. The efficacy of these active packaging films and their antimicrobial properties were also investigated to ensure their practical application. Three different types of nanocomposite films (Ge/Car, Ge/Car/TEO, and Ge/Car/ZNP) were prepared. The characterization of the films was elucidated using Fourier transform infrared (FTIR), X-ray diffraction analyses (XRD), and scanning electron microscope (SEM). Physicochemical and mechanical properties of the films were enhanced, owing to the application of TEO-containing nanocomposites. Supercritical-CO₂ extracted TEO showed excellent biological activities, alongside GC-MS analysis identified that TEO contained 33 bioactive compounds where the major constituent was Zingiberene. ZNP proved an excellent carrier of TEO. The nanocomposite film sustainably released TEO, improving the shelf life of the chicken meat by reducing bacterial colonies from 3.08 log CFU/g to 2.81 log CFU/g after 14 days incubation against Salmonella enterica compared with 6.66 log CFU/g observed in the control film. The overall results of this study suggest that the nanocomposite active film is an excellent candidate for food packaging to ensure a better world.

Red onion skin extract rich in flavonoids encapsulated in ultrafine fibers of sweet potato starch by electrospinning

Electrospinning encapsulation is a highly viable method to protect bioactive compounds and prevent their degradation. Hence, this study produced ultrafine fibers based on yellow and white sweet potato starches and a red onion skin extract (ROSE; 0, 3, 6, and 9 %, w/w) using electrospinning. The fibers were evaluated for morphology, thermogravimetric properties, antioxidant, in vitro release simulation, thermal resistance (100 and 180 °C), and wettability. The fibers with ROSE presented 251-611 nm diameters, 67-78 % loading capacity, and 51.6-95.4 and 13.4-99.4 % thermal resistance (100 and 180 °C, respectively); apigenin presented the highest thermal protection. The phenolic compounds showed low release using 10 % ethanol and greater release with 50 % ethanol. The fibers with 9 % ROSE showed 2,2'-azino-bis(3-ethylbenzothiazoline) 6-sulfonic acid radical inhibition above 92 %. The ultrafine fibers and the unencapsulated ROSE showed inhibitory action against Escherichia coli and Staphylococcus aureus; only unencapsulated ROSE showed bactericidal activity.

High strength, controlled release of curcumin-loaded ZIF-8/chitosan/zein film with excellence gas barrier and antibacterial activity for litchi preservation

Polysaccharide films containing protein additives have good application prospects in agriculture and food field. However, interfacial incompatibility between hydrophobic proteins and hydrophilic polymers remains a major technical challenge. In this work, the interfacial compatibility between hydrophobic zein and hydrophilic chitosan (CS) is improved by the chemical crosslinking between zinc ions of curcumin-loaded zeolitic imidazolate framework-8 (Cur-ZIF-8) with CS and zein. With the improvement of interface compatibility, the results show that the elongation at break and O₂ barrier property of synthesized Cur-ZIF-8/CS/Zein are 9.2 and 1.5 times higher than CS/Zein, respectively. And the Cur-ZIF-8/CS/Zein exhibits superior antibacterial and antioxidant properties as well. Importantly, Cur-ZIF-8/CS/Zein can also be used as an intelligent-responsive release platform for curcumin. As a result, Cur-ZIF-8/CS/Zein can keep the freshness and appearance of litchi at least 8 days longer than that of CS/Zein. Therefore, this study provides a novel method to improve the interfacial compatibility between hydrophobic proteins and hydrophilic polymers, and is expected to expand the application of protein/polymer composites in agriculture and food field.

Insights into electrospun pullulan-carboxymethyl chitosan/PEO core-shell nanofibers loaded with nanogels for food antibacterial packaging

Nisin, a natural substance from Lactococcus lactis, displays a promising antibacterial ability against the gram-positive bacteria. However, it is susceptible to the external environment, i.e. temperature, pH, and food composition. In this study, a dual stabilization method, coaxial electrospinning, was applied to protect nisin in food packaging materials and the effect of nisin concentration on the properties of the nanofibers was investigated. The core-shell nanofibers with pullulan as a core layer and carboxymethyl chitosan (CMCS)/polyethylene oxide (PEO) as shell layer were prepared, and then the prepared CMCS-nisin nanogels (CNNGs) using a self-assembly method were loaded into the core layer of the nanofibers as antibacterial agents. The result revealed that the smooth surface can be observed on the nanofibers by microstructure characterization. The CNNGs-loaded nanofibers exhibited enhanced thermal stability and mechanical strength, as well as excellent antibacterial activity. Importantly, the as-formed nanofibers were applied to preserve bass fish and found that the shelf life of bass fish packed by CNNGSs with nisin at a concentration of 8 mg/mL was effectively extended from 9 days to 15 days. Taken together, the CNNGs can be well stabilized with the core-shell nanofibers, thus exerting significantly improved antimicrobial stability and bioactivity. This special structure exerts a great potential for application as food packaging materials to preserve aquatic products.

Cholecalciferol-load films for the treatment of nasal burns caused by cauterization of the hypertrophied inferior turbinate: formulation, in vivo study, and clinical assessment

Nasal turbinate hypertrophy is among the most common nasal obstruction disorders, affecting the patient's quality of life significantly. Endoscopic submucosal diathermy is a prevalent cauterization procedure for treating turbinate hypertrophy. Regrettably, the nasal burn associated with diathermy typically heals slowly causing facial pain and nasal bleeding and possibly resulting in synechiae formation. In the current study, we have developed, for the first time, a polymeric film loaded with cholecalciferol for local treatment of nasal burns. The casting method was used to prepare films of different compositions of polymers such as chitosan, polyvinyl alcohol (PVA), Carbopol 971p (CP971p), and hydroxypropyl methylcellulose (HPMC) as well as a plasticizer. Several characterizations were performed for the cholecalciferol-loaded films (e.g. weight, thickness, content uniformity, surface pH, folding endurance, disintegration time, and in vitro release) to select the optimal formulation. The optimal formulation (F4) displayed compatibility between the used polymers and the drug. In vivo animal study was carried out to assess the healing efficacy of the formulated cholecalciferol-loaded film. The rabbits treated with the cholecalciferol-loaded film demonstrated significantly higher mRNA expression of the growth factor TGF-β and significantly lower mRNA expression of the proinflammatory cytokine TNF-α and IL-1β compared to the plain film treated group and the untreated control group. A randomized, single-blinded, parallel, controlled clinical trial was conducted on 20 patients scheduled to undergo endoscopic submucous diathermy. The results of the clinical study demonstrated significant reductions in facial pain and nasal bleeding scores for the nostrils treated with cholecalciferol-loaded films in comparison to the nostrils treated with plain films. Furthermore, the endoscopic examination showed good healing for 95% of the cholecalciferol-loaded film-treated nostrils. In conclusion, the optimized film can be considered an opportune approach for enhancing the healing rate of nasal burns and thus reducing the downsides of the diathermy procedure.

Evaluation of mechanical, antimicrobial, and antioxidant properties of vanillic acid induced chitosan/poly (vinyl alcohol) active films to prolong the shelf life of green chilli

Vanillic acid incorporated chitosan/poly(vinyl alcohol) active films were prepared by employing a cost-effective solvent casting technique. FTIR investigation validated the intermolecular interaction and formation of Schiff's base (C=N) between functional groups of vanillic acid, chitosan, and poly(vinyl alcohol). The addition of vanillic acid resulted in homogenous and dense morphology, as confirmed by SEM micrographs. The tensile strength of active films increased from 32 to 59 MPa as the amount of vanillic acid increased and the obtained values are more significant than reported polyethylene (2231 MPa) and polypropylene (31-38 MPa) films, widely utilized in food packaging. Active film's UV, water, and oxygen barrier properties exhibited excellent results with the incorporation of vanillic acid. Around 40 % of degradation commences within 15 days. Synergistic impact against S. aureus, E. coli, and C. albicans pathogens caused the expansion of the inhibition zone, evidenced by the excellent antimicrobial activity. The highest antioxidant capacity, 73.65 % of CPV-4 active film, proved that active films could prevent the spoilage of food from oxidation. Green chillies packaging was carried out to examine the potential of prepared active films as packaging material results in successfully sustaining carotenoid accumulation and prolonging the shelf life compared to conventional polyethylene (PE) packaging.

A Contribution to Improve Barrier Properties and Reduce Swelling Ratio of κ-Carrageenan Film from the Incorporation of Guar Gum or Locust Bean Gum

In this study, galactomannan (GM), including guar gum (GG) or locust bean gum (LG), was incorporated into a κ-carrageenan film to improve barrier properties and reduce the swelling ratio (SR). The effects of that with different concentrations on optical, mechanical, barrier, swelling and thermal properties of the κ-carrageenan-based film were researched. SEM and rheological results showed that both κ-carrageenan/GG and κ-carrageenan/LG had good compatibility and stability. FTIR results showed that LG was easier to form hydrogen bonds with κ-carrageenan. The KC-L exhibited excellent mechanical properties, barrier properties, and SR than KC-G. The film with 15% GM had good light transmittance. Moreover, the thermal stability of the film could be improved by adding GMs. This study reports that the κ-carrageenan–GM film has potential in packaging applications.

The impacts of chitosan-essential oil nanoemulsions on the microbial diversity and chemical composition of refrigerated minced meat

Essential oils of Mentha piperita, Punica granatum, Thymus vulgaris and Citrus limon in olive oil as a carrier were mixed with biopolymer chitosan to prepare nanoemulsions. The formulations were prepared using the following ratios: 0.5:0.5:4, 1:1:4, and 2:3:4 of chitosan: essential oil: olive oil, respectively, representing 12 formulations based on four essential oils. Based on the characterization of nanoemulsions, M. piperita, T. vulgaris, and C. limon oils produced the smallest droplets. However, P. granatum oil produced high droplets size. The products were evaluated in vitro for antimicrobial activity against two pathogenic food bacteria, Escherichia coli and Salmonella typhimunium. The in vivo antibacterial activity was further investigated on minced beef meat during storage at 4 °C for ten days. Based on the MIC values, E. coli was more susceptible than S. typhimunium. Chitosan was more effective as an antibacterial than essential oils (MIC = 500 and 650 mg/L against E. coli and S. typhimunium). Among the tested products, C. limon had a more antibacterial effect. In vivo studies proved that C. limon and its nanoemulsion were the most active products against E.coli. These results suggest that chitosan-essential oil nanoemulsions may help extend the shelf life of meat by acting as antimicrobial agents.

Correlation between Mechanical and Morphological Properties of Polyphenol-Laden Xanthan Gum/Poly(vinyl alcohol) Composite Cryogels

This study aimed to evaluate the effect of the synthesis parameters and the incorporation of natural polyphenolic extract within hydrogel networks on the mechanical and morphological properties of physically cross-linked xanthan gum/poly(vinyl alcohol) (XG/PVA) composite hydrogels prepared by multiple cryo-structuration steps. In this context, the toughness, compressive strength, and viscoelasticity of polyphenol-loaded XG/PVA composite hydrogels in comparison with those of the neat polymer networks were investigated by uniaxial compression tests and steady and oscillatory measurements under small deformation conditions. The swelling behavior, the contact angle values, and the morphological features revealed by SEM and AFM analyses were well correlated with the uniaxial compression and rheological results. The compressive tests revealed an enhancement of the network rigidity by increasing the number of cryogenic cycles. On the other hand, tough and flexible polyphenol-loaded composite films were obtained for a weight ratio between XG and PVA of 1:1 and 10 v/v% polyphenol. The gel behavior was confirmed for all composite hydrogels, as the elastic modulus (G') was significantly greater than the viscous modulus (G″) for the entire frequency range.

Opuntia spp.: An Overview of the Bioactive Profile and Food Applications of This Versatile Crop Adapted to Arid Lands

Opuntia spp. are crops well adapted to adverse environments and have great economic potential. Their constituents, including fruits, cladodes, and flowers, have a high nutritional value and are rich in value-added compounds. Cladodes have an appreciable content in dietary fiber, as well as bioactive compounds such as kaempferol, quercetin, and isorhamnetin. Fruits are a major source of bioactive compounds such as phenolic acids and vitamin C. The seeds are mainly composed of unsaturated fatty acids and vitamin E. The flowers are also rich in phenolic compounds. Therefore, in addition to their traditional uses, the different plant fractions can be processed to meet multiple applications in the food industry. Several bakery products have been developed with the incorporation of cladode flour. Pectin and mucilage obtained from cladodes can act as edible films and coatings. Fruits, fruit extracts, and fruit by-products have been mixed into food products, increasing their antioxidant capacity and extending their shelf life. Betalains, obtained from fruits, can be used as food colorants and demonstrate promising applications as a sensor in food packaging. This work reviews the most valuable components of the different fractions of this plant and emphasizes its most recent food applications, demonstrating its outstanding value.

Seed Priming with Glutamic-Acid-Functionalized Iron Nanoparticles Modulating Response of Vigna radiata (L.) R. Wilczek (Mung Bean) to Induce Osmotic Stress

Rising soil salinity is a major concern for agricultural production worldwide, particularly in arid and semi-arid regions. To improve salt tolerance and the productivity of economic crop plants in the face of future climatic changes, plant-based solutions are required to feed the continuously increasing world population. In the present study, we aimed to ascertain the impact of Glutamic-acid-functionalized iron nanoparticles (Glu-FeNPs) on two varieties (NM-92 and AZRI-2006) of mung beans with different concentrations (0, 40 mM, 60 mM, and 80 mM) of osmotic stress. The result of the study showed that vegetative growth parameters such as root and shoot length, fresh and dry biomass, moisture contents, leaf area, and the number of pods per plant were significantly decreased with osmotic stress. Similarly, biochemicals such as protein, chlorophylls, and carotenes contents also significantly declined under induced osmotic stress. The application of Glu-FeNPs significantly (p ≤ 0.05) restored both the vegetative growth parameters and biochemical contents of plants under osmotic stress. The pre-sowing treatment of seeds with Glu-FeNPs significantly ameliorated the tolerance level of Vigna radiata to osmotic stress by optimizing the level of antioxidant enzymes and osmolytes such as superoxide dismutase (SOD), peroxidase (POD), and proline contents. Our finding indicates that Glu-FeNPs significantly restore the growth of plants under osmotic stress via enhancing photosynthetic activity and triggering the antioxidation system of both varieties.

Development and characterization of tapioca starch/pectin composite films incorporated with broccoli leaf polyphenols and the improvement of quality during the chilled mutton storage

This study aimed at the composition of active packaging film from tapioca starch/pectin (TSP) incorporated with broccoli leaf polyphenols (BLP) was prepared and applied to improve the qualities of the chilled mutton during storage. The results indicated the addition of BLP significantly improved the thickness, density, barrier ability, mechanical properties, water solubility and antioxidant activity of the composite films while inducing decreases in the brightness (p < 0.05), enhancing inter-molecular interactions of TSP + BLP composite films. The WVP, oxygen permeability and elongation at break of the composite film reached the minimum when BLP concentration was 3 % while exhibiting the highest tensile strength and the best performance. This composite film delayed microbial growth and minimized oxidative rancidity during chilled mutton storage, causing the improvement of its quality and extending its shelf life to 12 days. Therefore, TSP + BLP composite films possessed the promise to be applied as bioactive materials in food packaging sectors.

Recent advancements in natural colorants and their application as coloring in food and in intelligent food packaging

Colorants are widely employed in the food industry as an essential ingredient in many products since color is one of the most valued attributes by consumers. Furthermore, the utilization of colorants is currently being extended to the food packaging technologies. The objective of this review was to compile recent information about the main families of natural coloring compounds, and to describe their real implications in food coloring. In addition, their technological use in different food systems (namely, bakery products, beverages, meat and meat products, and dairy products) and their utilization in intelligent packaging to monitor the freshness of foodstuffs with the aim of extending food shelf life and improving food properties was discussed. The potential of using natural colorant in different food to improve their color has been demonstrated, although color stability is still a challenging task. More interestingly, the application of intelligent colorimetric indicators to exhibit color changes with variations in pH can enable real-time monitoring of food quality.

Gelatin/poly(vinyl alcohol)-based functional films integrated with spent coffee ground-derived carbon dots and grapefruit seed extract for active packaging application

Nanoparticles are attractive, functional additives with great potential to be applied in biomaterial and food packaging. However, these particles are not soluble in water, thus limiting their widespread application. Here, we report a facile fabrication of carbon dots (CDs) using the spent coffee ground as the carbon source through a hydrothermal method. The CD was added to the gelatin/poly(vinyl alcohol) (Gel/PVA) film and grapefruit seed extract (GSE) to prepare multifunctional packaging films. The functional films' physiochemical and functional properties and packaging application were investigated. The composite film showed good UV protection properties with a slight decrease in transparency. The composite film containing CD/GSE showed strong antioxidant activity, scavenging >38 % DPPH and 100 % ABTS radicals. The film also exhibited significant antibacterial activity against the foodborne pathogens Listeria monocytogenes and Escherichia coli, completely eradicating the growth of these bacteria within 9 h of exposure. The CD/GSE-incorporated Gel/PVA films were used for pork packaging. The films were able to enhance the pork shelf life by reducing the L. monocytogenes bacterial growth in meat by 2 Log CFU/mL lower than the control wrapping film. The multifunctional Gel/PVA films are expected to be used for the active packaging of meat products.

Exploring the Potential of Pomegranate Peel Extract as a Natural Food Additive: A Review

PURPOSE OF THE REVIEW

Pomegranate is one of the super fruit and a storehouse of several antioxidants and health-promoting compounds which can act as a natural food additive. The pomegranate processing industry generates huge quantities of by-products, particularly peels (50% of fresh fruit weight), that cause environmental pollution due to improper disposal. In this perspective, the present review article focuses on the chemical composition of pomegranate peel and its application as a natural food additive in different food products such as bakery, dairy, meat/meat products, fish/fish products, edible oils, and packaging materials.

RECENT FINDINGS

There is a continuous demand for processed foods exhibiting natural food additives over foods containing synthetic additives/colorants, which can cause serious health implications such as cancer with regular consumption. The food industry is looking for an alternative to synthetic/artificial food additives. To overcome these problems, pomegranate peel or its extract can be used as a natural biopreservative in food products that are prone to fat oxidation and microbial growth. Pomegranate peel contains bioactive compounds, especially tannins, phenolic acids, and flavonoids, which have nutraceutical value and possess higher antioxidant activity and antimicrobial properties. Due to these properties, pomegranate peel prevents lipid oxidation in fatty foods and can also retard the microbial growth.

Ligand Substitution: An Effective Way for Tuning Structures of ZIF-7 Nanoparticles (NPs) and Improving Energy Recovery Performance of ZIF/PA TFN Membranes

It is an important initiative to reduce the building energy consumption using energy recovering ventilation (ERV) systems. The application of ERV systems is hindered by the low CO₂ barrier performance of commercial total heat exchange membranes (THEMs) that lead to unsatisfactory indoor air refreshing rate, and there is an urgent need for THEMs that have improved CO₂ barrier properties and effective energy recovery efficiencies. Here, we report the formation of novel ZIF/PA TFN THEMs based on ZIF-7-X nanoparticles (NPs) with "core-shell" structures and tunable particle sizes, formed from benzimidazole (BIM) ligands and BIM substituted by -NH₂, -CH₃, -C₂H₅, and -C₃H₇ functional groups. The NPs were mixed with pyr omellitic triformyl chloride (TMC) in the organic phase during the interface polymerization process to form ZIF/PA TFN membranes. The total heat exchange performance of ZIF/PA TFN membranes could be effectively modified by the type and quantity of ZIF-7-X NPs added. The CO₂ barrier properties and water vapor permeability of ZIF/PA TFN membranes could be improved by the addition of optimal levels of ZIF-7-X NPs, showing low CO₂ permeance of 7.76 GPU, high H₂O permeance of 663.8 GPU, and excellent enthalpy exchange efficiency of 72.1%. This work provided an effective strategy for tuning not only the nanostructures of ZIF-7 fillers but also the CO₂ barrier properties of the formed ZIF/PA TFN membranes.

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

Films composed of white angico gum and chitosan containing chlorhexidine as an antimicrobial agent

Anadenanthera colubrina, popularly known as white angico, is a species extensively cultivated in Brazil, mainly in the cerrado region, including the state of Piauí. This study examines the development of films composed of white angico gum (WAG) and chitosan (CHI) and containing chlorhexidine (CHX), an antimicrobial agent. The solvent casting method was used to prepare films. Different combinations and concentrations of WAG and CHI were used to obtain films with good physicochemical characteristics. Properties such as the in vitro swelling ratio, the disintegration time, folding endurance, and the drug content were determined. The selected formulations were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the CHX release time and antimicrobial activity were evaluated. CHX showed a homogenous distribution in all CHI/WAG film formulations. The optimised films showed good physicochemical properties with 80% CHX release over 26 h, which is considered promising for local treatment of severe lesions in the mouth. Cytotoxicity tests of the films did not show toxicity. The antimicrobial and antifungal effects were very effective against the tested microorganisms.

Nutritionally rich biochemical profile in essential oil of various Mentha species and their antimicrobial activities

The Mentha species of family Lamiaceae are famous for their flavor and are commercially used in many food products worldwide. They are widely used to cure digestive problems as well as a natural source of antioxidants and antimicrobials. In this report, the essential oils (EOs) of five Mentha species, namely Mentha citrata, Mentha x piperita, Mentha pulegium, Mentha spicata, and Mentha suaveolens were extracted and their chemical diversity was investigated through gas chromatography-mass spectroscopy (GC-MS). The differential doses (5, 10, and 15 µl) of EOs were tested for antimicrobial potential against two gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis), five gram-negative bacteria (Escherichia coli, Pseudomonas aeroginosa, Salmonella typhi, Proteus mirabilis and Klebsiella pneumoniae) and a fungal strain (Candida albicans). The GC-MS results revealed the major components in the EOs were Carvone, Linalool, Hotrienol, Menthol, Isopulegone, Furanone, Piperitone, and Thymol. Moreover, the higher dose (15 µl) of EOs of M. citrata inhibited the growth of S. typhi and C. albicans (35.8 ± 2.4 and 35.2 ± 2.5 mm), M. x piperita inhibited E. coli, B. subtilis, and C. albicans (28.5 ± 3.5, 26.1 ± 2.1, and 25.4 ± 1.1 mm), M. pulegium inhibited K. pneumoniae, B. subtilis, and C. albicans (26.8 ± 1.8, 24.2 ± 2.2, and 25.3 ± 0.9 mm), M. spicata significantly inhibited S. typhi and B. subtilis (35.7 ± 2.7 and 36.3 ± 2.1 mm), and M. suaveolens inhibited K. pneumoniae, C. albicans, and S. typhi (30.8 ± 1.9, 26.9 ± 1.1, and 20.1 ± 0.8 mm) respectively. This study concluded that the EOs of M. citrata was effective against S. typhi and C. albicans. The M. x piperita exhibited strong activities against E. coli, B. subtilis, and C. albicans. Furthermore, the M. pulegium strongly inhibited the growth of K. pneumoniae and C. albicans. The EO of M. spicata was more potent against S. typhi and B. subtilis, while the M. suaveolens was comparatively more effective against S. typhi, K. pneumoniae, and C. albicans. These EOs offer a natural source of antimicrobial agents with high commercial values and social acceptance and could be scale up by food and pharmaceutical industries to control pathogenic diseases.

Pomegranate (Punica granatum) peel alleviates lithium-induced alterations in the thyroid gland of rats by modulating apoptosis and oxidative stress

Lithium carbonate (LC) is known to alter thyroid gland function. Pomegranate (PG) is a fruit with multiple antioxidant and antiapoptotic properties. Here, we studied the effect of PG on LC-induced morphological and functional alterations in the thyroid glands of rats. Rats were divided into four groups: control, lithium, lithium-PG, and PG. After 8 weeks, the rats were sacrificed, the levels of thyroid hormones and oxidative stress markers were estimated, and thyroid tissues were subjected to histological, immunohistochemical, and ultrastructural evaluations. Compared to the control group, the lithium group showed significant changes in thyroid hormone levels, greater expression of the oxidant marker malondialdehyde, and lower expression of the antioxidant marker superoxide dismutase (SOD). Most of these changes improved upon PG treatment. Histological evaluation of the thyroid in the lithium group showed disorganization and follicle involution. Additionally, the periodic acid Schiff staining intensity and SOD immunoreactivity declined significantly, whereas the collagen fiber content and Bax immunoreactivity increased. The follicular ultrastructure showed marked distortion. These changes were mitigated upon PG treatment. In conclusion, PG alleviated the morphological and functional changes in the thyroid glands induced by LC by modulating apoptosis and oxidative stress.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Application of smart packaging for seafood: A comprehensive review

Nowadays, due to the changes in lifestyle and great interest of consumers in a healthy life, people have started increasing their seafood consumption. But due to their short shelf life, experts are looking for a new packaging called smart packaging (SMP) for seafood. There are different indicators/sensors in SMP; one of the effective indices is time-temperature, which can show consumers the best time of using seafood based on their shelf life and experienced temperature. Another one is radio-frequency identification (RFID) that is a transmission device that represents a separate form of the electronic information-based SMP systems. RFID does not belong to any of the categories of markers or sensors; it is an auto recognition system that applies cordless sensors to indicate segments and collect real-time information without manual interposition. This review covers the use of SMP in all marine foods, including fish, due to its high consumption and high content of polyunsaturated fatty acids, eicosapentaenoic acid (C20:5n-3) and docosahexaenoic acid (C22:6n-3), which are the considerable factors of n-3 polyunsaturated fatty acids for human.