The Role of Excitons on Light Amplification in Lead Halide Perovskites

The role of excitons on the amplifications of lead halide perovskites has been explored. Unlike the photoluminescence, the intensity of amplified spontaneous emission is partially suppressed at low temperature. The detailed analysis and experiments show that the inhibition is attributed to the existence of exciton and a quantitative model has been built to explain the experimental observations.

Efficient and Stable White LEDs with Silica-Coated Inorganic Perovskite Quantum Dots

A white light-emitting diode (0.33, 0.33) is fabricated using perovskite quantum dot/silica composites. It is shown to have greatly improved stability.

Free Excitons and Exciton-Phonon Coupling in CH3NH3PbI3 Single Crystals Revealed by Photocurrent and Photoluminescence Measurements at Low Temperatures

We investigated the exciton-phonon couplings and exciton binding energy in CH₃NH₃PbI₃ (MAPbI₃) single crystals using temperature-dependent photocurrent (PC) and photoluminescence (PL) spectroscopy. The PC and PL data provide clear evidence of the existence of excitons in orthorhombic-phase MAPbI₃. The temperature-dependent PC data were found to be less influenced by the bound excitons than the PL data, and thus the PC data reflect the intrinsic scatterings of excitons. We observed that the exciton-phonon couplings were strong in MAPbI₃ and determined the longitudinal optical phonon energy to be 16.1 meV. Moreover, on the basis of the temperature dependences of the PC and PL data, we evaluated the exciton binding energy to be 12.4 meV for orthorhombic-phase MAPbI₃ single crystals. Our findings pave a way for using simultaneous PC and PL measurements to determine precisely fundamental properties of perovskites.

Facet-Dependent Property of Sequentially Deposited Perovskite Thin Films: Chemical Origin and Self-Annihilation

Quantification of intergrain length scale properties of CH₃NH₃PbI₃ (MAPbI₃) can provide further understanding of material physics, leading to improved device performance. In this work, we noticed that two typical types of facets appear in sequential deposited perovskite (SDP) films: smooth and steplike morphologies. By mapping the surface potential as well as the photoluminescence (PL) peak position, we revealed the heterogeneity of SDP thin films that smooth facets are almost intrinsic with a PL peak at 775 nm, while the steplike facets are p-type-doped with 5-nm blue-shifted PL peak. Considering the reaction process, we propose that the smooth facets have well-defined crystal lattices that resulted from the interfacial reaction between MAI and PbI₂ domains containing low trap states density. The steplike facets are MAI-rich originated from the grain boundaries of PbI₂ film and own more trap states. Conversion of steplike facets to smooth facets can be controlled by increasing the reaction time through Ostwald ripening. The improved stability, photoresponsivity up to 0.3 A/W, on/off ratio up to 3900, and decreased photo response time to ∼160 μs show that the trap states can be annihilated effectively to improve the photoelectrical conversion with prolonged reaction time and elimination of steplike facets. Our findings demonstrate the relationship between the facet heterogeneity of SDP films and crystal growth process for the first time, and imply that the systematic control of crystal grain modification will enable amelioration of crystallinity for more-efficient perovskite photoelectrical applications.

All-Inorganic Perovskite Solar Cells

The research field on perovskite solar cells (PSCs) is seeing frequent record breaking in the power conversion efficiency (PCE). However, organic-inorganic hybrid halide perovskites and organic additives in common hole-transport materials (HTMs) exhibit poor stability against moisture and heat. Here we report the successful fabrication of all-inorganic PSCs without any labile or expensive organic components. The entire fabrication process can be operated in ambient environment without humidity control (e.g., a glovebox). Even without encapsulation, the all-inorganic PSCs present no performance degradation in humid air (90-95% relative humidity, 25 °C) for over 3 months (2640 h) and can endure extreme temperatures (100 and -22 °C). Moreover, by elimination of expensive HTMs and noble-metal electrodes, the cost was significantly reduced. The highest PCE of the first-generation all-inorganic PSCs reached 6.7%. This study opens the door for next-generation PSCs with long-term stability under harsh conditions, making practical application of PSCs a real possibility.

Surface and Interface Aspects of Organometal Halide Perovskite Materials and Solar Cells

The current challenges (e.g., stability, hysteresis, etc.) in organometal halide perovskite solar cell research are closely correlated with surfaces and interfaces. For instance, efficient generation of charges, extraction, and transport with minimum recombination through interlayer interfaces is crucial to attain high-efficiency solar cell devices. Furthermore, intralayer interfaces may be present in the form of grain boundaries within a film composed of the same material, for example, a polycrystalline perovskite layer. The adjacent grains may assume different crystal orientations and/or have different chemical compositions, which impacts charge excitation and dynamics and thereby the overall solar cell performance. In this Perspective, we present case studies to demonstrate (1) how surfaces and interfaces can impact material properties and device performance and (2) how these issues can be investigated by surface science techniques, such as scanning probe microscopy, photoelectron spectroscopy, and so forth. We end this Perspective by outlining the future research directions based on the reported results as well as the new trends in the field.

X-ray Scintillation in Lead Halide Perovskite Crystals

Current technologies for X-ray detection rely on scintillation from expensive inorganic crystals grown at high-temperature, which so far has hindered the development of large-area scintillator arrays. Thanks to the presence of heavy atoms, solution-grown hybrid lead halide perovskite single crystals exhibit short X-ray absorption length and excellent detection efficiency. Here we compare X-ray scintillator characteristics of three-dimensional (3D) MAPbI₃ and MAPbBr₃ and two-dimensional (2D) (EDBE)PbCl₄ hybrid perovskite crystals. X-ray excited thermoluminescence measurements indicate the absence of deep traps and a very small density of shallow trap states, which lessens after-glow effects. All perovskite single crystals exhibit high X-ray excited luminescence yields of >120,000 photons/MeV at low temperature. Although thermal quenching is significant at room temperature, the large exciton binding energy of 2D (EDBE)PbCl₄ significantly reduces thermal effects compared to 3D perovskites, and moderate light yield of 9,000 photons/MeV can be achieved even at room temperature. This highlights the potential of 2D metal halide perovskites for large-area and low-cost scintillator devices for medical, security and scientific applications.

Nonstoichiometric acid-base reaction as reliable synthetic route to highly stable CH3NH3PbI3 perovskite film

Perovskite solar cells have received worldwide interests due to swiftly improved efficiency but the poor stability of the perovskite component hampers the device fabrication under normal condition. Herein, we develop a reliable nonstoichiometric acid-base reaction route to stable perovskite films by intermediate chemistry and technology. Perovskite thin-film prepared by nonstoichiometric acid-base reaction route is stable for two months with negligible PbI2-impurity under ∼65% humidity, whereas other perovskites prepared by traditional methods degrade distinctly after 2 weeks. Route optimization involves the reaction of PbI2 with excess HI to generate HPbI3, which subsequently undergoes reaction with excess CH3NH2 to deliver CH3NH3PbI3 thin films. High quality of intermediate HPbI3 and CH3NH2 abundance are two important factors to stable CH3NH3PbI3 perovskite. Excess volatile acid/base not only affords full conversion in nonstoichiometric acid-base reaction route but also permits its facile removal for stoichiometric purification, resulting in average efficiency of 16.1% in forward/reverse scans.

N-Methylformamide as a Source of Methylammonium Ions in the Synthesis of Lead Halide Perovskite Nanocrystals and Bulk Crystals

We report chemical routes for the synthesis of both nanocrystals and bulk crystals of methylammonium (MA) lead halide perovskites employing N-methylformamide (NMF) as a source of MA ions. Colloidal nanocrystals were prepared by a transamidation reaction between NMF and an alkyl amine (oleylamine). The nanocrystals showed photoluminescence quantum yields reaching 74% for MAPbBr₃ and 60% for MAPbI₃. Bulk crystals were grown at room temperature, with no need for an antisolvent, by the acid hydrolysis of NMF. Important advantages of using NMF instead of MA salts are that the syntheses involve fewer steps and less toxic and less expensive chemicals.

Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films

Controlling crystal orientations and macroscopic morphology is vital to develop the electronic properties of hybrid perovskites. Here we show that a large-area, orientationally pure crystalline (OPC) methylammonium lead iodide (MAPbI3) hybrid perovskite film can be fabricated using a thermal-gradient-assisted directional crystallization method that relies on the sharp liquid-to-solid transition of MAPbI3 from ionic liquid solution. We find that the OPC films spontaneously form periodic microarrays that are distinguishable from general polycrystalline perovskite materials in terms of their crystal orientation, film morphology and electronic properties. X-ray diffraction patterns reveal that the film is strongly oriented in the (112) and (200) planes parallel to the substrate. This film is structurally confined by directional crystal growth, inducing intense anisotropy in charge transport. In addition, the low trap-state density (7.9 × 1013 cm-3) leads to strong amplified stimulated emission. This ability to control crystal orientation and morphology could be widely adopted in optoelectronic devices.

Mn2+-Doped Lead Halide Perovskite Nanocrystals with Dual-Color Emission Controlled by Halide Content

Impurity doping has been widely used to endow semiconductor nanocrystals with novel optical, electronic, and magnetic functionalities. Here, we introduce a new family of doped NCs offering unique insights into the chemical mechanism of doping, as well as into the fundamental interactions between the dopant and the semiconductor host. Specifically, by elucidating the role of relative bond strengths within the precursor and the host lattice, we develop an effective approach for incorporating manganese (Mn) ions into nanocrystals of lead-halide perovskites (CsPbX₃, where X = Cl, Br, or I). In a key enabling step not possible in, for example, II-VI nanocrystals, we use gentle chemical means to finely and reversibly tune the nanocrystal band gap over a wide range of energies (1.8-3.1 eV) via postsynthetic anion exchange. We observe a dramatic effect of halide identity on relative intensities of intrinsic band-edge and Mn emission bands, which we ascribe to the influence of the energy difference between the corresponding transitions on the characteristics of energy transfer between the Mn ion and the semiconductor host.

Controllable lasing performance in solution-processed organic-inorganic hybrid perovskites

Solution-processed organic-inorganic perovskites are fascinating due to their remarkable photo-conversion efficiency and great potential in the cost-effective, versatile and large-scale manufacturing of optoelectronic devices. In this paper, we demonstrate that the perovskite nanocrystal sizes can be simply controlled by manipulating the precursor solution concentrations in a two-step sequential deposition process, thus achieving the feasible tunability of excitonic properties and lasing performance in hybrid metal-halide perovskites. The lasing threshold is at around 230 μJ cm^-2 in this solution-processed organic-inorganic lead-halide material, which is comparable to the colloidal quantum dot lasers. The efficient stimulated emission originates from the multiple random scattering provided by the micro-meter scale rugged morphology and polycrystalline grain boundaries. Thus the excitonic properties in perovskites exhibit high correlation with the formed morphology of the perovskite nanocrystals. Compared to the conventional lasers normally serving as a coherent light source, the perovskite random lasers are promising in making low-cost thin-film lasing devices for flexible and speckle-free imaging applications.

The Bright Side of Perovskites

Incubating in the rise of perovskite photovoltaic era, the advances in material design encourage further promising optoelectronic exploitations. Here, we evaluate halide perovskite envisioning light-emitting applications, with a particular focus to the role that this material can effectively play in the field, discussing advantages and limitations with respect to state of art competing players. Specific benefits derive from the use of low dimensional and nanostructured perovskites, marginally exploited in photovoltaic devices, allowing for a tuning of the excited states properties and for the obtainment of intrinsic resonating structures. Thanks to these unique properties, halide perovskite ensure a great potential for the development of high-power applications, such as lighting and lasing.

Thermally Stable Mesoporous Perovskite Solar Cells Incorporating Low-Temperature Processed Graphene/Polymer Electron Transporting Layer

In the short time since its discovery, perovskite solar cells (PSCs) have attained high power conversion efficiency but their lack of thermal stability remains a barrier to commercialization. Among the experimentally accessible parameter spaces for optimizing performance, identifying an electron transport layer (ETL) that forms a thermally stable interface with perovskite and which is solution-processable at low-temperature will certainly be advantageous. Herein, we developed a mesoporous graphene/polymer composite with these advantages when used as ETL in CH₃NH₃PbI₃ PSCs, and a high efficiency of 13.8% under AM 1.5G solar illumination could be obtained. Due to the high heat transmission coefficient and low isoelectric point of mesoporous graphene-based ETL, the PSC device enjoys good chemical and thermal stability. Our work demonstrates that the mesoporous graphene-based scaffold is a promising ETL candidate for high performance and thermally stable PSCs.

Thinness- and Shape-Controlled Growth for Ultrathin Single-Crystalline Perovskite Wafers for Mass Production of Superior Photoelectronic Devices

Thinness-controlled perovskite wafers are directly prepared using a geometry-regulated dynamic-flow reaction system. It is found that the wafers are a superior material for photodetectors with a photocurrent response ≈350 times higher than that made of microcrystalline thin films. Moreover, the wafers are compatible with mass production of integrated circuits.

Tuning the Optical Properties of Perovskite Nanoplatelets through Composition and Thickness by Ligand-Assisted Exfoliation

High-quality hybrid halide perovskite nanocrystals are fabricated through a simple, versatile, and efficient two-step process involving a dry step followed by a ligand-assisted liquid-phase exfoliation step. The emission wavelength of the resulting nanocrystals can be tuned either through composition by varying the halide content or by reducing their thickness.

Coexistence of Two Electronic Nano-Phases on a CH3NH3PbI3-xClx Surface Observed in STM Measurements

Scanning tunneling microscopy is utilized to investigate the local density of states of a CH₃NH₃PbI_3-xCl_x perovskite in cross-sectional geometry. Two electronic phases, 10-20 nm in size, with different electronic properties inside the CH₃NH₃PbI_3-xCl_x perovskite layer are observed by the dI/dV mapping and point spectra. A power law dependence of the dI/dV point spectra is revealed. In addition, the distinct electronic phases are found to have preferential orientations close to the normal direction of the film surface. Density functional theory calculations indicate that the observed electronic phases are associated with local deviation of I/Cl ratio, rather than different orientations of the electric dipole moments in the ferroelectric phases. By comparing the calculated results with experimental data we conclude that phase A (lower contrast in dI/dV mapping at -2.0 V bias) contains a lower I/Cl ratio than that in phase B (higher contrast in dI/dV).

Colloidal Organometal Halide Perovskite (MAPbBrxI3-x, 0≤x≤3) Quantum Dots: Controllable Synthesis and Tunable Photoluminescence

Organic-inorganic perovskite materials, typically methylammonium lead trihalide (MAPbX₃: MA = methylammonium; X = Br, I), are recently attract enormous attention for their distinguished photo-electronic properties. The control of morphology, composition and dispersability of MAPbX₃ perovskite nanocrystals is crucial for the property tailoring and still a major challenge. Here we report the synthesis of colloidal MAPbBr_xI_3−x(0 ≤ x ≤ 3) nanocrystals at room temperature by using alkyl carboxylate as capping ligands. These nanocrystals exhibit continuously tunable UV-vis absorption and photoluminescence (PL) across the visible spectrum, which is attributed to the quantum confinement effect with certain stoichiometry. Their unique exciton recombination dynamics was investigated and discussed.

Pure white-light emitting ultrasmall organic-inorganic hybrid perovskite nanoclusters

Organic-inorganic hybrid perovskites, direct band-gap semiconductors, have shown tremendous promise for optoelectronic device fabrication. We report the first colloidal synthetic approach to prepare ultrasmall (∼1.5 nm diameter), white-light emitting, organic-inorganic hybrid perovskite nanoclusters. The nearly pure white-light emitting ultrasmall nanoclusters were obtained by selectively manipulating the surface chemistry (passivating ligands and surface trap-states) and controlled substitution of halide ions. The nanoclusters displayed a combination of band-edge and broadband photoluminescence properties, covering a major part of the visible region of the solar spectrum with unprecedentedly large quantum yields of ∼12% and photoluminescence lifetime of ∼20 ns. The intrinsic white-light emission of perovskite nanoclusters makes them ideal and low cost hybrid nanomaterials for solid-state lighting applications.

A perspective on the recent progress in solution-processed methods for highly efficient perovskite solar cells

Perovskite solar cells (PSCs) were developed in 2009 and have led to a number of significant improvements in clean energy technology. The power conversion efficiency (PCE) of PSCs has increased exponentially and currently stands at 22%. PSCs are transforming photovoltaic (PV) technology, outpacing many established PV technologies through their versatility and roll-to-roll manufacturing compatibility. The viability of low-temperature and solution-processed manufacturing has further improved their viability. This article provides a brief overview of the stoichiometry of perovskite materials, the engineering behind various modes of manufacturing by solution processing methods, and recommendations for future research to achieve large-scale manufacturing of high efficiency PSCs.

Symmetry-Based Tight Binding Modeling of Halide Perovskite Semiconductors

On the basis of a general symmetry analysis, this paper presents an empirical tight-binding (TB) model for the reference Pm-3m perovskite cubic phase of halide perovskites of general formula ABX₃. The TB electronic band diagram, with and without spin orbit coupling effect of MAPbI₃ has been determined based on state of the art density functional theory results including many body corrections (DFT+GW). It affords access to various properties, including distorted structures, at a significantly reduced computational cost. This is illustrated with the calculation of the band-to-band absorption spectrum, the variation of the band gap under volumetric strain, as well as the Rashba effect for a uniaxial symmetry breaking. Compared to DFT approaches, this empirical model will help to tackle larger issues, such as the electronic band structure of large nanostructures, including many-body effects, or heterostructures relevant to perovskite device modeling suited to the description of atomic-scale features.

Enhanced Electron Collection in Perovskite Solar Cells Employing Thermoelectric NaCo2 O4 /TiO2 Coaxial Nanofibers

Thermoelectric NaCo₂ O₄ /TiO₂ coaxial nanofibers are prepared and distributed in the perovskite solar cells. Under illumination, p-type NaCo₂ O₄ can convert unwanted heat to thermal voltage, and thus promote the electron extraction and transport with the action of electrostatic force. These advantages collectively contribute to an overall power conversion efficiency improvement of ≈20% (15.14% vs 12.65%).

Perovskite Photodetectors Operating in Both Narrowband and Broadband Regimes

Photodetectors are designed, which operate in the broadband regime upon bottom illumination (from the indium tin oxide (ITO) side) and in the narrowband regime upon top illumination (from the air/perovskite side). The narrowband photodetectors show high external quantum efficiency of above 10⁴ %. The operational spectrum of the photodetectors can also be tuned by adjusting the halide composition in the active material.

Perovskite energy funnels for efficient light-emitting diodes

Organometal halide perovskites exhibit large bulk crystal domain sizes, rare traps, excellent mobilities and carriers that are free at room temperature-properties that support their excellent performance in charge-separating devices. In devices that rely on the forward injection of electrons and holes, such as light-emitting diodes (LEDs), excellent mobilities contribute to the efficient capture of non-equilibrium charge carriers by rare non-radiative centres. Moreover, the lack of bound excitons weakens the competition of desired radiative (over undesired non-radiative) recombination. Here we report a perovskite mixed material comprising a series of differently quantum-size-tuned grains that funnels photoexcitations to the lowest-bandgap light-emitter in the mixture. The materials function as charge carrier concentrators, ensuring that radiative recombination successfully outcompetes trapping and hence non-radiative recombination. We use the new material to build devices that exhibit an external quantum efficiency (EQE) of 8.8% and a radiance of 80 W sr^-1 m^-2. These represent the brightest and most efficient solution-processed near-infrared LEDs to date.

Enhanced Structural Stability and Photo Responsiveness of CH3 NH3 SnI3 Perovskite via Pressure-Induced Amorphization and Recrystallization

An organic-inorganic halide CH₃ NH₃ SnI₃ perovskite with significantly improved structural stability is obtained via pressure-induced amorphization and recrystallization. In situ high-pressure resistance measurements reveal an increased electrical conductivity by 300% in the pressure-treated perovskite. Photocurrent measurements also reveal a substantial enhancement in visible-light responsiveness. The mechanism underlying the enhanced properties is shown to be associated with the pressure-induced structural modification.

Magnesium-doped Zinc Oxide as Electron Selective Contact Layers for Efficient Perovskite Solar Cells

The electron-selective contact layer (ESL) in organometal halide-based perovskite solar cells (PSCs) determines not only the power conversion efficiency (PCE) but also the thermostability of PSCs. To improve the thermostability of ZnO-based PSCs, we developed Mg-doped ZnO [Zn_1-x Mg_x O (ZMO)] as a high optical transmittance ESL for the methylammonium lead trihalide perovskite absorber [CH₃ NH₃ PbI₃ ]. We further investigated the optical and electrical properties of the ESL films with Mg contents of 0-30 mol % and the corresponding devices. We achieved a maximum PCE of 16.5 % with improved thermal stability of CH₃ NH₃ PbI₃ on ESL with the optimal ZMO (0.4 m) containing 10 mol % Mg. Moreover, this optimized ZMO PSC exhibited significantly improved durability and photostability owing to the improved chemical/photochemical stability of the wider optical bandgap ZMO.

Giant Rashba Splitting in CH_{3}NH_{3}PbBr_{3} Organic-Inorganic Perovskite

As they combine decent mobilities with extremely long carrier lifetimes, organic-inorganic perovskites open a whole new field in optoelectronics. Measurements of their underlying electronic structure, however, are still lacking. Using angle-resolved photoelectron spectroscopy, we measure the valence band dispersion of single-crystal CH_{3}NH_{3}PbBr_{3}. The dispersion of the highest energy band is extracted applying a modified leading edge method, which accounts for the particular density of states of organic-inorganic perovskites. The surface Brillouin zone is consistent with bulk-terminated surfaces both in the low-temperature orthorhombic and the high-temperature cubic phase. In the low-temperature phase, we find a ring-shaped valence band maximum with a radius of 0.043  Å^{-1}, centered around a 0.16 eV deep local minimum in the dispersion of the valence band at the high-symmetry point. Intense circular dichroism is observed. This dispersion is the result of strong spin-orbit coupling. Spin-orbit coupling is also present in the room-temperature phase. The coupling strength is one of the largest ones reported so far.

Harnessing Defect-Tolerance at the Nanoscale: Highly Luminescent Lead Halide Perovskite Nanocrystals in Mesoporous Silica Matrixes

Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as a novel class of bright emitters with pure colors spanning the entire visible spectral range. Contrary to conventional quantum dots, such as CdSe and InP NCs, perovskite NCs feature unusual, defect-tolerant photophysics. Specifically, surface dangling bonds and intrinsic point defects such as vacancies do not form midgap states, known to trap carriers and thereby quench photoluminescence (PL). Accordingly, perovskite NCs need not be electronically surface-passivated (with, for instance, ligands and wider-gap materials) and do not noticeably suffer from photo-oxidation. Novel opportunities for their preparation therefore can be envisaged. Herein, we show that the infiltration of perovskite precursor solutions into the pores of mesoporous silica, followed by drying, leads to the template-assisted formation of perovskite NCs. The most striking outcome of this simple methodology is very bright PL with quantum efficiencies exceeding 50%. This facile strategy can be applied to a large variety of perovskite compounds, hybrid and fully inorganic, with the general formula APbX3, where A is cesium (Cs), methylammonium (MA), or formamidinium (FA), and X is Cl, Br, I or a mixture thereof. The luminescent properties of the resulting templated NCs can be tuned by both quantum size effects as well as composition. Also exhibiting intrinsic haze due to scattering within the composite, such materials may find applications as replacements for conventional phosphors in liquid-crystal television display technologies and in related luminescence down-conversion-based devices.

Iodomethane-Mediated Organometal Halide Perovskite with Record Photoluminescence Lifetime

Organometallic lead halide perovskites are excellent light harvesters for high-efficiency photovoltaic devices. However, as the key component in these devices, a perovskite thin film with good morphology and minimal trap states is still difficult to obtain. Herein we show that by incorporating a low boiling point alkyl halide such as iodomethane (CH3I) into the precursor solution, a perovskite (CH3NH3PbI3-xClx) film with improved grain size and orientation can be easily achieved. More importantly, these films exhibit a significantly reduced amount of trap states. Record photoluminescence lifetimes of more than 4 μs are achieved; these lifetimes are significantly longer than that of pristine CH3NH3PbI3-xClx films. Planar heterojunction solar cells incorporating these CH3I-mediated perovskites have demonstrated a dramatically increased power conversion efficiency compared to the ones using pristine CH3NH3PbI3-xClx. Photoluminescence, transient absorption, and microwave detected photoconductivity measurements all provide consistent evidence that CH3I addition increases the number of excitons generated and their diffusion length, both of which assist efficient carrier transport in the photovoltaic device. The simple incorporation of alkyl halide to enhance perovskite surface passivation introduces an important direction for future progress on high efficiency perovskite optoelectronic devices.

Metal-encapsulated organolead halide perovskite photocathode for solar-driven hydrogen evolution in water

Lead-halide perovskites have triggered the latest breakthrough in photovoltaic technology. Despite the great promise shown by these materials, their instability towards water even in the presence of low amounts of moisture makes them, a priori, unsuitable for their direct use as light harvesters in aqueous solution for the production of hydrogen through water splitting. Here, we present a simple method that enables their use in photoelectrocatalytic hydrogen evolution while immersed in an aqueous solution. Field's metal, a fusible InBiSn alloy, is used to efficiently protect the perovskite from water while simultaneously allowing the photogenerated electrons to reach a Pt hydrogen evolution catalyst. A record photocurrent density of −9.8 mA cm⁻² at 0 V versus RHE with an onset potential as positive as 0.95±0.03 V versus RHE is obtained. The photoelectrodes show remarkable stability retaining more than 80% of their initial photocurrent for ∼1 h under continuous illumination.

Lead-halide perovskites are sensitive to humidity, which limits their use in water splitting applications. Here, the authors protect the perovskite layer with Field's metal, driving photoelectrocatalytic hydrogen evolution in an aqueous solution for approximately one hour under constant illumination.

Fast and Sensitive Solution-Processed Visible-Blind Perovskite UV Photodetectors

The first visible-blind UV photodetector based on MAPbCl3 integrated on a substrate exhibits excellent performance, with responsivities reaching 18 A W(-1) below 400 nm and imaging-compatible response times of 1 ms. This is achieved by using substrate-integrated single crystals, thus overcoming the severe limitations affecting thin films and offering a new application of efficient, solution-processed, visible-transparent perovskite optoelectronics.

Insight into the Ligand-Mediated Synthesis of Colloidal CsPbBr3 Perovskite Nanocrystals: The Role of Organic Acid, Base, and Cesium Precursors

While convenient solution-based procedures have been realized for the synthesis of colloidal perovskite nanocrystals, the impact of surfactant ligands on the shape, size, and surface properties still remains poorly understood, which calls for a more detailed structure-morphology study. Herein we have systematically varied the hydrocarbon chain composition of carboxylic acids and amines to investigate the surface chemistry and the independent impact of acid and amine on the size and shape of perovskite nanocrystals. Solution phase studies on purified nanocrystal samples by (1)H NMR and IR spectroscopies have confirmed the presence of both carboxylate and alkylammonium ligands on surfaces, with the alkylammonium ligand being much more mobile and susceptible to detachment from the nanocrystal surfaces during polar solvent washes. Moreover, the chain length variation of carboxylic acids and amines, ranging from 18 carbons down to two carbons, has shown independent correlation to the size and shape of nanocrystals in addition to the temperature effect. We have additionally demonstrated that employing a more soluble cesium acetate precursor in place of the universally used Cs2CO3 results in enhanced processability without sacrificing optical properties, thus offering a more versatile recipe for perovskite nanocrystal synthesis that allows the use of organic acids and amines bearing chains shorter than eight carbon atoms. Overall our studies have shed light on the influence of ligand chemistry on crystal growth and stabilization of the nanocrystals, which opens the door to functionalizable perovskite nanocrsytals through surface ligand manipulation.

Highly Tunable Colloidal Perovskite Nanoplatelets through Variable Cation, Metal, and Halide Composition

Colloidal perovskite nanoplatelets are a promising class of semiconductor nanomaterials-exhibiting bright luminescence, tunable and spectrally narrow absorption and emission features, strongly confined excitonic states, and facile colloidal synthesis. Here, we demonstrate the high degree of spectral tunability achievable through variation of the cation, metal, and halide composition as well as nanoplatelet thickness. We synthesize nanoplatelets of the form L2[ABX3]n-1BX4, where L is an organic ligand (octylammonium, butylammonium), A is a monovalent metal or organic molecular cation (cesium, methylammonium, formamidinium), B is a divalent metal cation (lead, tin), X is a halide anion (chloride, bromide, iodide), and n-1 is the number of unit cells in thickness. We show that variation of n, B, and X leads to large changes in the absorption and emission energy, while variation of the A cation leads to only subtle changes but can significantly impact the nanoplatelet stability and photoluminescence quantum yield (with values over 20%). Furthermore, mixed halide nanoplatelets exhibit continuous spectral tunability over a 1.5 eV spectral range, from 2.2 to 3.7 eV. The nanoplatelets have relatively large lateral dimensions (100 nm to 1 μm), which promote self-assembly into stacked superlattice structures-the periodicity of which can be adjusted based on the nanoplatelet surface ligand length. These results demonstrate the versatility of colloidal perovskite nanoplatelets as a material platform, with tunability extending from the deep-UV, across the visible, into the near-IR. In particular, the tin-containing nanoplatelets represent a significant addition to the small but increasingly important family of lead- and cadmium-free colloidal semiconductors.

Charge Injection at the Heterointerface in Perovskite CH3NH3PbI3 Solar Cells Studied by Simultaneous Microscopic Photoluminescence and Photocurrent Imaging Spectroscopy

Charge carrier dynamics in perovskite CH3NH3PbI3 solar cells were studied by means of microscopic photoluminescence (PL) and photocurrent (PC) imaging spectroscopy. The PL intensity, PL lifetime, and PC intensity varied spatially on the order of several tens of micrometers. Simultaneous PL and PC image measurements revealed a positive correlation between the PL intensity and PL lifetime, and a negative correlation between PL and PC intensities. These correlations were due to the competition between photocarrier injection from the CH3NH3PbI3 layer into the charge transport layer and photocarrier recombination within the CH3NH3PbI3 layer. Furthermore, we found that the decrease in the carrier injection efficiency under prolonged light illumination leads to a reduction in PC, resulting in light-induced degradation of solar cell devices. Our findings provide important insights for understanding carrier injection at the interface and light-induced degradation in perovskite solar cells.

Rashba Effect and Carrier Mobility in Hybrid Organic-Inorganic Perovskites

The outstanding photovoltaic performance in hybrid organic-inorganic perovskites (HOIPs) relies on their desirable carrier transport properties. In the HOIPs, strong spin-orbit coupling (SOC) and structural inversion asymmetry give rise to a giant spin splitting in the conduction and valence bands, that is, the Rashba effect (RE), a subject intensively studied in spintronics. Here we show that this giant RE can manifest itself in charge transport and is the key to understanding carrier mobility and its temperature dependence in the HOIPs. The RE greatly enhances acoustic-phonon scattering (APS) and alters the temperature dependence of carrier mobility from T(-3/2) to T(-1). Meanwhile, it reduces polar-optical phonon scattering (POPS). In CH3NH3PbI3, the carrier mobility is limited by the APS for temperatures up to 100 K, above which the POPS becomes dominant. The effective polar coupling is moderate, α = 1.1, indicating that band conduction is still a valid description of charge transport. Our results account for the observed carrier transport behaviors over the entire temperature range and highlight the importance of SOC in charge transport in the HOIPs.

Terahertz Conductivity within Colloidal CsPbBr3 Perovskite Nanocrystals: Remarkably High Carrier Mobilities and Large Diffusion Lengths

Colloidal CsPbBr3 perovskite nanocrystals (NCs) have emerged as an excellent light emitting material in last one year. Using time domain and time-resolved THz spectroscopy and density functional theory based calculations, we establish 3-fold free carrier recombination mechanism, namely, nonradiative Auger, bimolecular electron-hole recombination, and inefficient trap-assisted recombination in 11 nm sized colloidal CsPbBr3 NCs. Our results confirm a negligible influence of surface defects in trapping charge carriers, which in turn results into desirable intrinsic transport properties, from the perspective of device applications, such as remarkably high carrier mobility (∼4500 cm(2) V(-1) s(-1)), large diffusion length (>9.2 μm), and high luminescence quantum yield (80%). Despite being solution processed and possessing a large surface to volume ratio, this combination of high carrier mobility and diffusion length, along with nearly ideal photoluminescence quantum yield, is unique compared to any other colloidal quantum dot system.

Characterization of Capacitance, Transport and Recombination Parameters in Hybrid Perovskite and Organic Solar Cells

The application of small perturbation frequency techniques to solar cells provides a great deal of information in terms of capacitive and resistive processes that are related to the photophysical mechanisms that lie at the basis of the photovoltaic operation. These methods can be exhaustively exploited to determine bulk and contact effects in the solar cells, and henceforth improve and optimize materials and interfaces. For photovoltaic devices, the main effects of interest in impedance spectroscopy are the capacitive charge storage and the resistive processes of transport and recombination. The combination of these parameters provides important information about properties such as conductivity, diffusion length and carrier lifetime. In this chapter, we provide an extensive review of the present status of knowledge about these aspects of solar cell operation for organic solar cells and hybrid organic–inorganic perovskite solar cells. We describe an exhaustive characterization of capacitive processes, including dielectric relaxation processes, and examine the interpretation of transport and recombination based on a variety of experimental techniques.

Chemical Approaches to Addressing the Instability and Toxicity of Lead-Halide Perovskite Absorbers

The impressive rise in efficiencies of solar cells employing the three-dimensional (3D) lead-iodide perovskite absorbers APbI₃ (A = monovalent cation) has generated intense excitement. Although these perovskites have remarkable properties as solar-cell absorbers, their potential commercialization now requires a greater focus on the materials' inherent shortcomings and environmental impact. This creates a challenge and an opportunity for synthetic chemists to address these issues through the design of new materials. Synthetic chemistry offers powerful tools for manipulating the magnificent flexibility of the perovskite lattice to expand the number of functional analogues to APbI₃. To highlight improvements that should be targeted in new materials, here we discuss the intrinsic instability and toxicity of 3D lead-halide perovskites. We consider possible sources of these instabilities and propose methods to overcome them through synthetic design. We also discuss new materials developed for realizing the exceptional photophysical properties of lead-halide perovskites in more environmentally benign materials. In this Forum Article, we provide a brief overview of the field with a focus on our group's contributions to identifying and addressing problems inherent to 3D lead-halide perovskites.

Electron-Rotor Interaction in Organic-Inorganic Lead Iodide Perovskites Discovered by Isotope Effects

We report on the carrier-rotor coupling effect in perovskite organic-inorganic hybrid lead iodide (CH3NH3PbI3) compounds discovered by isotope effects. Deuterated organic-inorganic perovskite compounds including CH3ND3PbI3, CD3NH3PbI3, and CD3ND3PbI3 were synthesized. Devices made from regular CH3NH3PbI3 and deuterated CH3ND3PbI3 exhibit comparable performance in band gap, current-voltage, carrier mobility, and power conversion efficiency. However, a time-resolved photoluminescence (TRPL) study reveals that CH3NH3PbI3 exhibits notably longer carrier lifetime than that of CH3ND3PbI3, in both thin-film and single-crystal formats. Furthermore, the comparison in carrier lifetime between CD3NH3PbI3 and CH3ND3PbI3 single crystals suggests that vibrational modes in methylammonium (MA(+)) have little impact on carrier lifetime. In contrast, the fully deuterated compound CD3ND3PbI3 reconfirmed the trend of decreasing carrier lifetime upon the increasing moment of inertia of cationic MA(+). Polaron model elucidates the electron-rotor interaction.

Low Threshold Two-Photon-Pumped Amplified Spontaneous Emission in CH3NH3PbBr3 Microdisks

Two-photon-pumped amplified spontaneous emission (ASE) of CH3NH3PbBr3 microdisks (MDs) were investigated by using femtosecond laser system. Low threshold at 2.2 mJ cm(-2) was obtained. Also, emission spectral tunability from 500 to 570 nm was demonstrated by synthesis the mixed halide perovskite MDs. The spatial effect of photoluminescence (PL) properties under one-photon and two-photon excitation were also studied by means of two-photon laser scanning microscope (TPLSM) and time-resolved PL spectroscopy. It was found that the band to band emission of near-surface regions and photocarriers' diffusion from near-surface regions to interior regions is significant for one-photon excitation. By contrast, reabsorption of emission under two-photon excitation plays a major role in the emission properties of the MDs. These results will give a more comprehensive understanding of the nonlinear effect of CH3NH3PbBr3 single crystals.