Size-dependent phase transition in methylammonium lead iodide perovskite microplate crystals

Methylammonium lead iodide perovskite has attracted considerable recent interest for solution processable solar cells and other optoelectronic applications. The orthorhombic-to-tetragonal phase transition in perovskite can significantly alter its optical, electrical properties and impact the corresponding applications. Here, we report a systematic investigation of the size-dependent orthorhombic-to-tetragonal phase transition using a combined temperature-dependent optical, electrical transport and transmission electron microscopy study. Our studies of individual perovskite microplates with variable thicknesses demonstrate that the phase transition temperature decreases with reducing microplate thickness. The sudden decrease of mobility around phase transition temperature and the presence of hysteresis loops in the temperature-dependent mobility confirm that the orthorhombic-to-tetragonal phase transition is a first-order phase transition. Our findings offer significant fundamental insight on the temperature- and size-dependent structural, optical and charge transport properties of perovskite materials, and can greatly impact future exploration of novel electronic and optoelectronic devices from these materials.

Perovskite Photovoltaics with Outstanding Performance Produced by Chemical Conversion of Bilayer Mesostructured Lead Halide/TiO2 Films

A new method of producing high-quality perovskite films via sequential deposition is presented, introducing a PbX2 capping layer that is endowed with a network of interconnected nanopores. The mesoporous lead halide architecture provides a powerful tool to accomplish rapid and complete transformation of lead halide into the perovskite for high-efficiency solar cells.

Optical Spintronics in Organic-Inorganic Perovskite Photovoltaics

Organic-inorganic halide CH3NH3PbI3 solar cells have attracted enormous attention in recent years due to their remarkable power conversion efficiency. When inversion symmetry is broken, these materials should exhibit interesting spin-dependent properties as well, owing to their strong spin-orbit coupling. In this work, we consider the spin-dependent optical response of CH3NH3PbI3. We first use density functional theory to compute the ballistic spin current generated by absorption of unpolarized light. We then consider diffusive transport of photogenerated charge and spin for a thin CH3NH3PbI3 layer with a passivated surface and an Ohmic, non-selective contact. The spin density and spin current are evaluated by solving the drift-diffusion equations for a simplified 3-dimensional Rashba model of the electronic structure of the valence and conduction bands. We provide analytic expressions for the photon flux required to induce measurable spin densities, and propose that these spin densities can provide useful information about the role of grain boundaries in the photovoltaic behavior of these materials. We also discuss the prospects for measuring the optically generated spin current with the inverse spin Hall effect.

Benzotrithiophene-Based Hole-Transporting Materials for 18.2 % Perovskite Solar Cells

New star-shaped benzotrithiophene (BTT)-based hole-transporting materials (HTM) BTT-1, BTT-2 and BTT-3 have been obtained through a facile synthetic route by crosslinking triarylamine-based donor groups with a benzotrithiophene (BTT) core. The BTT HTMs were tested on solution-processed lead trihalide perovskite-based solar cells. Power conversion efficiencies in the range of 16 % to 18.2 % were achieved under AM 1.5 sun with the three derivatives. These values are comparable to those obtained with today's most commonly used HTM spiro-OMeTAD, which point them out as promising candidates to be used as readily available and cost-effective alternatives in perovskite solar cells (PSCs).

Approaching Bulk Carrier Dynamics in Organo-Halide Perovskite Nanocrystalline Films by Surface Passivation

The electronic properties of organo-halide perovskite absorbers described in the literature have been closely associated with their morphologies and processing conditions. However, the underlying origins of this dependence remain unclear. A combination of inorganic synthesis, surface chemistry, and time-resolved photoluminescence spectroscopy was used to show that charge recombination centers in organo-halide perovskites are almost exclusively localized on the surfaces of the crystals rather than in the bulk. Passivation of these surface defects causes average charge carrier lifetimes in nanocrystalline thin films to approach the bulk limit reported for single-crystal organo-halide perovskites. These findings indicate that the charge carrier lifetimes of perovskites are correlated with their thin-film processing conditions and morphologies through the influence these have on the surface chemistry of the nanocrystals. Therefore, surface passivation may provide a means to decouple the electronic properties of organo-halide perovskites from their thin-film processing conditions and corresponding morphologies.

Giant photostriction in organic-inorganic lead halide perovskites

Among the many materials investigated for next-generation photovoltaic cells, organic–inorganic lead halide perovskites have demonstrated great potential thanks to their high power conversion efficiency and solution processability. Within a short period of about 5 years, the efficiency of solar cells based on these materials has increased dramatically from 3.8 to over 20%. Despite the tremendous progress in device performance, much less is known about the underlying photophysics involving charge–orbital–lattice interactions and the role of the organic molecules in this hybrid material remains poorly understood. Here, we report a giant photostrictive response, that is, light-induced lattice change, of >1,200 p.p.m. in methylammonium lead iodide, which could be the key to understand its superior optical properties. The strong photon-lattice coupling also opens up the possibility of employing these materials in wireless opto-mechanical devices.

The photophysics of lead halide perovskites is under intense investigation. Here, the authors use force microscopy on single crystals to show that light induces drastic lattice changes, and propose that the weakening of the hydrogen coupling under illumination is responsible for the lattice dilatation.

Spiro-OMeTAD single crystals: Remarkably enhanced charge-carrier transport via mesoscale ordering

We report the crystal structure and hole-transport mechanism in spiro-OMeTAD [2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9'-spirobifluorene], the dominant hole-transporting material in perovskite and solid-state dye-sensitized solar cells. Despite spiro-OMeTAD's paramount role in such devices, its crystal structure was unknown because of highly disordered solution-processed films; the hole-transport pathways remained ill-defined and the charge carrier mobilities were low, posing a major bottleneck for advancing cell efficiencies. We devised an antisolvent crystallization strategy to grow single crystals of spiro-OMeTAD, which allowed us to experimentally elucidate its molecular packing and transport properties. Electronic structure calculations enabled us to map spiro-OMeTAD's intermolecular charge-hopping pathways. Promisingly, single-crystal mobilities were found to exceed their thin-film counterparts by three orders of magnitude. Our findings underscore mesoscale ordering as a key strategy to achieving breakthroughs in hole-transport material engineering of solar cells.

Structure and Growth Control of Organic-Inorganic Halide Perovskites for Optoelectronics: From Polycrystalline Films to Single Crystals

Recently, organic-inorganic halide perovskites have sparked tremendous research interest because of their ground-breaking photovoltaic performance. The crystallization process and crystal shape of perovskites have striking impacts on their optoelectronic properties. Polycrystalline films and single crystals are two main forms of perovskites. Currently, perovskite thin films have been under intensive investigation while studies of perovskite single crystals are just in their infancy. This review article is concentrated upon the control of perovskite structures and growth, which are intimately correlated for improvements of not only solar cells but also light-emitting diodes, lasers, and photodetectors. We begin with the survey of the film formation process of perovskites including deposition methods and morphological optimization avenues. Strategies such as the use of additives, thermal annealing, solvent annealing, atmospheric control, and solvent engineering have been successfully employed to yield high-quality perovskite films. Next, we turn to summarize the shape evolution of perovskites single crystals from three-dimensional large sized single crystals, two-dimensional nanoplates, one-dimensional nanowires, to zero-dimensional quantum dots. Siginificant functions of perovskites single crystals are highlighted, which benefit fundamental studies of intrinsic photophysics. Then, the growth mechanisms of the previously mentioned perovskite crystals are unveiled. Lastly, perspectives for structure and growth control of perovskites are outlined towards high-performance (opto)electronic devices.

Mesoscopic perovskite solar cells with an admixture of nanocrystalline TiO₂ and Al₂O₃: role of interconnectivity of TiO₂ in charge collection

Perovskite solar cells with high power conversion efficiency usually employ mesoporous TiO2, however the role of the TiO2 layer has not been clearly resolved. Here we prepared MAPbI3 (MA = CH3NH3) perovskite solar cells with an admixture of nanocrystalline TiO2 and Al2O3 to investigate the role of the mesoporous TiO2 layer. The Al2O3 content was varied from 0% (pure TiO2) to 100% (pure Al2O3) with nominal composition of (1 - x)TiO2 + xAl2O3 (x = 0, 0.25, 0.5, 0.75 and 1). The photocurrent density and fill factor decreased as Al2O3 content increased, whereas the open-circuit voltage was hardly changed. Steady-state photoluminescence (PL) was less quenched as the Al2O3 content increased due to its non-electron-injecting characteristics, where a decrease in PL intensity with increasing TiO2 content was correlated to an increase in photocurrent. Electron injection to TiO2 was also evidenced by time-resolved PL and time-limited photocurrent measurements, where interconnection of TiO2 particles played an important role in charge collection. The slight change in voltage with Al2O3 content was explained by balancing the Fermi position due to a trade-off between charge recombination and the Fermi level. The results observed from the admixture mesoporous layer comprising electron-injecting and electron-non-injecting oxides suggest that electron-injection characteristics play an important role in determining photovoltaic parameters.

Effect of relative humidity on crystal growth, device performance and hysteresis in planar heterojunction perovskite solar cells

Due to the hygroscopic nature of organolead halide perovskites, humidity is one of the most important factors affecting the efficiency and longevity of perovskite solar cells. Although humidity has a long term detrimental effect on device performance, it also plays a key role during the initial growth of perovskite crystals. Here we demonstrate that atmospheric relative humidity (RH) plays a key role during the formation of perovskite thin films via the sequential deposition technique. Our results indicate that the RH has a substantial impact on the crystallization process, and hence on device performance. SEM and pXRD analysis show an increase in crystallite size with increasing humidity. At low RH, the formation of small cubic crystallites with large gaps between them is observed. The presence of these voids adversely affects device performance and leads to substantial hysteresis in the device. At higher RH, the perovskite crystals are larger in size, with better connectivity between the crystallites. This produced efficient planar heterojunction solar cells with low hysteresis. By careful control of the RH during the cell fabrication process, efficiencies of up to 12.2% are reached using P3HT as the hole-transport material.

The influence of the I/Cl ratio on the performance of CH3NH3PbI(3-x)Cl(x)-based solar cells: why is CH3NH3I : PbCl2 = 3 : 1 the "magic" ratio?

Methylammonium lead trihalide (CH3NH3PbI(3-x)Cl(x)) perovskites are usually synthesized from two precursors, CH3NH3I and PbCl2 at a ratio of 3 : 1. It was found that a slight adjustment of the I/Cl ratio in the precursor mixture plays a strong effect on solar cell performance. In this study, perovskites made with different I/Cl ratios were comparatively studied. In combination with X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS) measured at the Pb L3-edge, we demonstrate that the device performance can be directly correlated to the change in the coordination environment of Pb.

Polar-solvent-free colloidal synthesis of highly luminescent alkylammonium lead halide perovskite nanocrystals

A novel synthesis of hybrid organic-inorganic lead halide perovskite nanocrystals (CH3NH3PbX3, X = Br or I) that does not involve the use of dimethylformamide or other polar solvents is presented. The reaction between methylamine and PbX2 salts is conducted in a high-boiling nonpolar solvent (1-octadecene) in the presence of oleylamine and oleic acid as coordinating ligands. The resulting nanocrystals are characterized by high photoluminescence quantum efficiencies of 15-50%, outstanding phase purity and tunable shapes (nanocubes, nanowires, and nanoplatelets). Nanoplatelets spontaneously assemble into micrometer-length wires by face-to-face stacking. In addition, we demonstrate amplified spontaneous emission from thin films of green-emitting CH3NH3PbBr3 nanowires with low pumping thresholds of 3 μJ cm(-2).

Designing nanobowl arrays of mesoporous TiO₂ as an alternative electron transporting layer for carbon cathode-based perovskite solar cells

In this work, we have designed a mesoporous TiO2 nanobowl (NB) array with pore size, bowl size and film thickness being easily controllable by the sol-gel process and the polystyrene (PS) template diameter. Based on the TiO2 NB array, we fabricated carbon cathode based perovskite solar cells (C-PSCs) to investigate the impact of TiO2 NB nanostructures on the performance of the as-obtained C-PSCs devices. As expected, the TiO2 NB based devices show a higher power conversion efficiency (PCE) than that of the planar counterpart, mainly due to the enhanced light absorption arising from the NB-assisted light management, the improved pore-filling of high quality perovskite crystals and the increased interface contact for rapid electron extraction and fast charge transport. Leveraging these advantages of the novel TiO2 NB film, the 220 nm-PS templated TiO2 NB based devices performed the best on both light absorption capability and charge extraction, and achieved a PCE up to 12.02% with good stability, which is 37% higher than that of the planar counterpart. These results point to a viable and convenient route toward the fabrication of TiO2 ETL nanostructures for high performance PSCs.

Aligned Single-Crystalline Perovskite Microwire Arrays for High-Performance Flexible Image Sensors with Long-Term Stability

A simple, low-cost blade-coating method is developed for the large-area fabrication of single-crystalline aligned CH3NH3PbI3 microwire (MW) arrays. The solution-coating method is applicable to flexible substrates, enabling the fabrication of MW-array-based photodetectors with excellent long-term stability, flexibility, and bending durability. Integrated devices from such photodetectors demonstrate high performance for high-resolution, flexible image sensors.

Single Crystal Formamidinium Lead Iodide (FAPbI3): Insight into the Structural, Optical, and Electrical Properties

5 mm-scale large FAPbI 3 single crystals and corresponding photoconductive properties are shown. The phase transition of FAPbI3 between the α-phase and δ-phase is studied. The carrier mobility is 4.4 cm(2) V(-1) s(-1) with a lifetime of 484 ns in the bulk of the single crystal. Finally, photodetectors based on single-crystal FAPbI3 are demonstrated.

Hybrid Organic-Inorganic Perovskites on the Move

Hybrid organic-inorganic perovskites (HOIPs) are crystals with the structural formula ABX3, where A, B, and X are organic and inorganic ions, respectively. While known for several decades, HOIPs have only in recent years emerged as extremely promising semiconducting materials for solar energy applications. In particular, power-conversion efficiencies of HOIP-based solar cells have improved at a record speed and, after only little more than 6 years of photovoltaics research, surpassed the 20% threshold, which is an outstanding result for a solution-processable material. It is thus of fundamental importance to reveal physical and chemical phenomena that contribute to, or limit, these impressive photovoltaic efficiencies. To understand charge-transport and light-absorption properties of semiconducting materials, one often invokes a lattice of ions displaced from their static positions only by harmonic vibrations. However, a preponderance of recent studies suggests that this picture is not sufficient for HOIPs, where a variety of structurally dynamic effects, beyond small harmonic vibrations, arises already at room temperature. In this Account, we focus on these effects. First, we review structure and bonding in HOIPs and relate them to the promising charge-transport and absorption properties of these materials, in terms of favorable electronic properties. We point out that HOIPs are much "softer" mechanically, compared to other efficient solar-cell materials, and that this can result in large ionic displacements at room temperature. We therefore focus next on dynamic structural effects in HOIPs, going beyond a static band-structure picture. Specifically, we discuss pertinent experimental and theoretical findings as to phase-transition behavior and molecular/octahedral rearrangements. We then discuss atomic diffusion phenomena in HOIPs, with an emphasis on the migration of intrinsic and extrinsic ionic species. From this combined perspective, HOIPs appear as highly dynamic materials, in which structural fluctuations and long-range ionic motion have an unusually strong impact on charge-transport and optical properties. We highlight the potential implications of these effects for several intriguing phenomenological observations, ranging from scattering mechanisms and lifetimes of charge carriers to light-induced structural effects and ionic conduction.

Synthesis of Cesium Lead Halide Perovskite Nanocrystals in a Droplet-Based Microfluidic Platform: Fast Parametric Space Mapping

Prior to this work, fully inorganic nanocrystals of cesium lead halide perovskite (CsPbX3, X = Br, I, Cl and Cl/Br and Br/I mixed halide systems), exhibiting bright and tunable photoluminescence, have been synthesized using conventional batch (flask-based) reactions. Unfortunately, our understanding of the parameters governing the formation of these nanocrystals is still very limited due to extremely fast reaction kinetics and multiple variables involved in ion-metathesis-based synthesis of such multinary halide systems. Herein, we report the use of a droplet-based microfluidic platform for the synthesis of CsPbX3 nanocrystals. The combination of online photoluminescence and absorption measurements and the fast mixing of reagents within such a platform allows the rigorous and rapid mapping of the reaction parameters, including molar ratios of Cs, Pb, and halide precursors, reaction temperatures, and reaction times. This translates into enormous savings in reagent usage and screening times when compared to analogous batch synthetic approaches. The early-stage insight into the mechanism of nucleation of metal halide nanocrystals suggests similarities with multinary metal chalcogenide systems, albeit with much faster reaction kinetics in the case of halides. Furthermore, we show that microfluidics-optimized synthesis parameters are also directly transferrable to the conventional flask-based reaction.

High-Efficiency Perovskite Solar Cells Employing a S,N-Heteropentacene-based D-A Hole-Transport Material

We developed a new donor-π-acceptor-type hole-transport material (HTMs) incorporating S,N-heteropentacene as π-spacer, triarylamine as donor, and dicyanovinylene as acceptor. In addition to appropriate frontier molecular orbital energies, the new HTM showed high photo absorptivity in the visible region. Without the use of p-dopants, solution-processed mixed perovskite devices using the HTM achieved power conversion efficiencies of up to 16.9% and high photocurrents of up to 22.2 mA cm(-2). These results demonstrate that heteroacene can be an excellent building block to prepare alternative HTMs for perovskite solar cells and hold promise for further advancement through fine-tuning the molecular structure.

Charge Carrier Lifetimes Exceeding 15 μs in Methylammonium Lead Iodide Single Crystals

The charge carrier lifetime in organic-inorganic perovskites is one of the most important parameters for modeling and design of solar cells and other types of devices. In this work, we use CH3NH3PbI3 single crystal as a model system to study optical absorption, charge carrier generation, and recombination lifetimes. We show that commonly applied photoluminescence lifetime measurements may dramatically underestimate the intrinsic carrier lifetime in CH3NH3PbI3, which could be due to severe charge recombination at the crystal surface and/or fast electron-hole recombination close to the surface. By using the time-resolved microwave conductivity technique, we investigated the lifetime of free mobile charges inside the crystals. Most importantly, we find that for homogeneous excitation throughout the crystal, the charge carrier lifetime exceeds 15 μs. This means that the diffusion length in CH3NH3PbI3 can be as large as 50 μm if it is no longer limited by the dimensions of the crystallites.

Organohalide Lead Perovskites for Photovoltaic Applications

Perovskite solar cells have recently exhibited a significant leap in efficiency due to their broad absorption, high optical absorption coefficient, very low exciton binding energy, long carrier diffusion lengths, efficient charge collection, and very high open-circuit potential, similar to that of III-IV semiconductors. Unlike silicon solar cells, perovskite solar cells can be developed from a variety of low-temperature solutions processed from inexpensive raw materials. When the perovskite absorber film formation is optimized using solvent engineering, a power conversion efficiency of over 21% has been demonstrated, highlighting the unique photovoltaic properties of perovskite materials. Here, we review the current progress in perovskite solar cells and charge transport materials. We highlight crucial challenges and provide a summary and prospects.

Mobile Ion Induced Slow Carrier Dynamics in Organic-Inorganic Perovskite CH₃NH₃PbBr₃

Here, we investigate photoluminescence (PL) and time-resolved photoluminescence (TRPL) in CH3NH3PbBr3 perovskite under continuous illumination, using optical and electro-optical techniques. Under continuous excitation at constant intensity, PL intensity and PL decay (carrier recombination) exhibit excitation intensity dependent reductions in the time scale of seconds to minutes. The enhanced nonradiative recombination is ascribed to light activated negative ions and their accumulation which exhibit a slow dynamics in a time scale of seconds to minutes. The observed result suggests that the organic-inorganic hybrid perovskite is a mixed electronic-ionic semiconductor. The key findings in this work suggest that ions are photoactivated or electro-activated and their accumulation at localized sites can result in a change of carrier dynamics. The findings are therefore useful for the understanding of instability of perovskite solar cells and shed light on the necessary strategies for performance improvement.

Charge-Carrier Dynamics in Organic-Inorganic Metal Halide Perovskites

Hybrid organic-inorganic metal halide perovskites have recently emerged as exciting new light-harvesting and charge-transporting materials for efficient photovoltaic devices. Yet knowledge of the nature of the photogenerated excitations and their subsequent dynamics is only just emerging. This article reviews the current state of the field, focusing first on a description of the crystal and electronic band structure that give rise to the strong optical transitions that enable light harvesting. An overview is presented of the numerous experimental approaches toward determining values for exciton binding energies, which appear to be small (a few milli-electron volts to a few tens of milli-electron volts) and depend significantly on temperature because of associated changes in the dielectric function. Experimental evidence for charge-carrier relaxation dynamics within the first few picoseconds after excitation is discussed in terms of thermalization, cooling, and many-body effects. Charge-carrier recombination mechanisms are reviewed, encompassing trap-assisted nonradiative recombination that is highly specific to processing conditions, radiative bimolecular (electron-hole) recombination, and nonradiative many-body (Auger) mechanisms.

Fully Printed Halide Perovskite Light-Emitting Diodes with Silver Nanowire Electrodes

Printed organometal halide perovskite light-emitting diodes (LEDs) are reported that have indium tin oxide (ITO) or carbon nanotubes (CNTs) as the transparent anode, a printed composite film consisting of methylammonium lead tribromide (Br-Pero) and poly(ethylene oxide) (PEO) as the emissive layer, and printed silver nanowires as the cathode. The fabrication can be carried out in ambient air without humidity control. The devices on ITO/glass have a low turn-on voltage of 2.6 V, a maximum luminance intensity of 21014 cd m(-2), and a maximum external quantum efficiency (EQE) of 1.1%, surpassing previous reported perovskite LEDs. The devices on CNTs/polymer were able to be strained to 5 mm radius of curvature without affecting device properties.

Spatially Non-uniform Trap State Densities in Solution-Processed Hybrid Perovskite Thin Films

The facile solution-processability of methylammonium lead halide (CH3NH3PbI3) perovskites has catalyzed the development of inexpensive, hybrid perovskite-based optoelectronics. It is apparent, though, that solution-processed CH3NH3PbI3 films possess local emission heterogeneities, stemming from electronic disorder in the material. Herein we investigate the spatially resolved emission properties of CH3NH3PbI3 thin films through detailed emission intensity versus excitation intensity measurements. These studies enable us to establish the existence of nonuniform trap density variations wherein regions of CH3NH3PbI3 films exhibit effective free carrier recombination while others exhibit emission dynamics strongly influenced by the presence of trap states. Such trap density variations lead to spatially varying emission quantum yields and correspondingly impact the performance of both methylammonium lead halide perovskite solar cells and other hybrid perovskite-based devices. Of additional note is that the observed spatial extent of the optical disorder extends over length scales greater than that of underlying crystalline domains, suggesting the existence of other factors, beyond grain boundary-related nonradiative recombination channels, which lead to significant intrafilm optical heterogeneities.

Making and Breaking of Lead Halide Perovskites

A new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80-150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic-inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization kinetics can be tailored to yield improved thin film homogeneity. Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide (CH3NH3PbI3) to wide band gap hydrate compounds. The rate of degradation is increased upon exposure to light. Interestingly, the hydration process is reversible under certain conditions. This facile formation and subsequent chemical lability raises the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases, thus posing a significant challenge to the development of transformative perovskite photovoltaics. Adequately addressing issues of structural and chemical stability under real-world operating conditions is paramount if perovskite solar cells are to make an impact beyond the benchtop. Expanding our fundamental knowledge of lead halide perovskite formation and degradation pathways can facilitate fabrication of stable, high-quality perovskite thin films for the next generation of photovoltaic and light emitting devices.

Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells

Since the first report on the long-term durable 9.7% solid-state perovskite solar cell employing methylammonium lead iodide (CH3NH3PbI3), mesoporous TiO2, and 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-MeOTAD) in 2012, following the seed technologies on perovskite-sensitized liquid junction solar cells in 2009 and 2011, a surge of interest has been focused on perovskite solar cells due to superb photovoltaic performance and extremely facile fabrication processes. The power conversion efficiency (PCE) of perovskite solar cells reached 21% in a very short period of time. Such an unprecedentedly high photovoltaic performance is due to the intrinsic optoelectronic property of organolead iodide perovskite material. Moreover, a high dielectric constant, sub-millimeter scale carrier diffusion length, an underlying ferroelectric property, and ion migration behavior can make organolead halide perovskites suitable for multifunctionality. Thus, besides solar cell applications, perovskite material has recently been applied to a variety fields of materials science such as photodetectors, light emitting diodes, lasing, X-ray imaging, resistive memory, and water splitting. Regardless of application areas, the growth of a well-defined perovskite layer with high crystallinity is essential for effective utilization of its excellent physicochemical properties. Therefore, an effective methodology for preparation of high quality perovskite layers is required. In this Account, an effective methodology for production of high quality perovskite layers is described, which is the Lewis acid-base adduct approach. In the solution process to form the perovskite layer, the key chemicals of CH3NH3I (or HC(NH2)2I) and PbI2 are used by dissolving them in polar aprotic solvents. Since polar aprotic solvents bear oxygen, sulfur, or nitrogen, they can act as a Lewis base. In addition, the main group compound PbI2 is known to be a Lewis acid. Thus, PbI2 has a chance to form an adduct by reacting with the Lewis base. Crystal growth and morphology of perovskite can be controlled by taking advantage of the weak chemical interaction in the adduct. We have successfully fabricated highly reproducible CH3NH3PbI3 perovskite solar cells with PCE as high as 19.7% via adducts of PbI2 with oxygen-donor N,N'-dimethyl sulfoxide. This adduct approach has been found to be generally adopted, where formamidinium lead iodide perovskite, HC(NH2)2PbI3 (FAPbI3), with large grain, high crystallinity, and long-lived carrier lifetime was successfully fabricated via an adduct of PbI2 with sulfur-donor thiourea as Lewis base. The adduct approach proposed in this Account is a very promising methodology to achieve high quality perovskite films with high photovoltaic performance. Furthermore, single crystal growth on the conductive substrate is expected to be possible if we kinetically control the elimination of Lewis base in the adduct.

Modulating crystal grain size and optoelectronic properties of perovskite films for solar cells by reaction temperature

Regulating the temperature during the direction contact and intercalation process (DCIP) for the transition from PbI2 to CH3NH3PbI3 modulated the crystallinity, crystal grain size and crystal grain orientation of the perovskite films. Higher temperatures produced perovskite films with better crystallinity, larger grain size, and better photovoltaic performance. The best cell, which had a PCE of 12.9%, was obtained on a film prepared at 200 °C. Further open circuit voltage decay and film resistance characterization revealed that the larger grain size contributed to longer carrier lifetime and smaller carrier transport resistance, both of which are beneficial for solar cell devices.

A Bismuth-Halide Double Perovskite with Long Carrier Recombination Lifetime for Photovoltaic Applications

Despite the remarkable rise in efficiencies of solar cells containing the lead-halide perovskite absorbers RPbX3 (R = organic cation; X = Br(-) or I(-)), the toxicity of lead remains a concern for the large-scale implementation of this technology. This has spurred the search for lead-free materials with similar optoelectronic properties. Here, we use the double-perovskite structure to incorporate nontoxic Bi(3+) into the perovskite lattice in Cs2AgBiBr6 (1). The solid shows a long room-temperature fundamental photoluminescence (PL) lifetime of ca. 660 ns, which is very encouraging for photovoltaic applications. Comparison between single-crystal and powder PL decay curves of 1 suggests inherently high defect tolerance. The material has an indirect bandgap of 1.95 eV, suited for a tandem solar cell. Furthermore, 1 is significantly more heat and moisture stable compared to (MA)PbI3. The extremely promising optical and physical properties of 1 shown here motivate further exploration of both inorganic and hybrid halide double perovskites for photovoltaics and other optoelectronics.

Nanowire Lasers of Formamidinium Lead Halide Perovskites and Their Stabilized Alloys with Improved Stability

The excellent intrinsic optoelectronic properties of methylammonium lead halide perovskites (MAPbX3, X = Br, I), such as high photoluminescence quantum efficiency, long carrier lifetime, and high gain coupled with the facile solution growth of nanowires make them promising new materials for ultralow-threshold nanowire lasers. However, their photo and thermal stabilities need to be improved for practical applications. Herein, we report a low-temperature solution growth of single crystal nanowires of formamidinium lead halide perovskites (FAPbX3) that feature red-shifted emission and better thermal stability compared to MAPbX3. We demonstrate optically pumped room-temperature near-infrared (∼820 nm) and green lasing (∼560 nm) from FAPbI3 (and MABr-stabilized FAPbI3) and FAPbBr3 nanowires with low lasing thresholds of several microjoules per square centimeter and high quality factors of about 1500-2300. More remarkably, the FAPbI3 and MABr-stabilized FAPbI3 nanowires display durable room-temperature lasing under ∼10(8) shots of sustained illumination of 402 nm pulsed laser excitation (150 fs, 250 kHz), substantially exceeding the stability of MAPbI3 (∼10(7) laser shots). We further demonstrate tunable nanowire lasers in wider wavelength region from FA-based lead halide perovskite alloys (FA,MA)PbI3 and (FA,MA)Pb(I,Br)3 through cation and anion substitutions. The results suggest that formamidinium lead halide perovskite nanostructures could be more promising and stable materials for the development of light-emitting diodes and continuous-wave lasers.

Compact Layer Free Perovskite Solar Cells with a High-Mobility Hole-Transporting Layer

A high-mobility diketopyrrolopyrrole-based copolymer (P) was employed in compact layer free CH3NH3PbI3 perovskite solar cells as a hole-transporting layer (HTL). By using the P-HTL, the 6.62% device efficiency with conventional poly-3-hexylthiophene was increased to 10.80% in the simple device configuration (ITO/CH3NH3PbI3/HTL/MoO3/Ag). With improved short circuit current density, open circuit voltage, and fill factor, the higher power conversion efficiency of P-HTL device is ascribed to the higher carrier mobility, more suitable energy level, and lower interfacial charge recombination. Advantages of applying P-HTL to perovskite solar cells, such as low cost, low-temperature processing, and excellent performance with simple cell structure, exhibit a possibility for commercial applications.

Photovoltaic Performance of Perovskite Solar Cells with Different Grain Sizes

Perovskite solar cells exhibit improved photovoltaic parameters with increasing perovskite grain size. The larger photocurrent is due to the enhanced absorption efficiency for thicker perovskite layers. The larger open-circuit voltage (VOC ) is ascribed to the reduced trap-assisted recombination for the larger grains. As a result, the power conversion efficiency exceeds 19% at best. Further improvement in VOC would be possible if the trap density were reduced.

Recent progress and challenges of organometal halide perovskite solar cells

We review recent progress in the development of organometal halide perovskite solar cells. We discuss different compounds used to construct perovskite photoactive layers, as well as the optoelectronic properties of this system. The factors that affect the morphology of the perovskite active layer are explored, e.g. material composition, film deposition methods, casting solvent and various post-treatments. Different strategies are reviewed that have recently emerged to prepare high performing perovskite films, creating polycrystalline films having either large or small grain size. Devices that are constructed using meso-superstructured and planar architectures are summarized and the impact of the fabrication process on operational efficiency is discussed. Finally, important research challenges (hysteresis, thermal and moisture instability, mechanical flexibility, as well as the development of lead-free materials) in the development of perovskite solar cells are outlined and their potential solutions are discussed.

Formation of single-mode laser in transverse plane of perovskite microwire via micromanipulation

The synthesized perovskites are randomly distributed and their optical properties are fixed after synthesis. Here we demonstrate the tailoring of lasing properties of perovskite microwire via micromanipulation. One microwire has been lifted by a tungsten probe and repositioned on a nearby perovskite microplate with one end suspended in air. Consequently, the conventional Fabry-Perot lasers are completely suppressed and a single laser peak has been observed. The numerical calculations reveal that the single-mode laser is formed by the whispering-gallery mode in the transverse plane of microwire. Our research provides a simple way to tailor the properties of microwire postsynthesis.

Intrinsic and Extrinsic Charge Transport in CH3NH3PbI3 Perovskites Predicted from First-Principles

Both intrinsic and extrinsic charge transport properties of methylammonium lead triiodide perovskites are investigated from first-principles. The weak electron-phonon couplings are revealed, with the largest deformation potential (~ 5 eV) comparable to that of single layer graphene. The intrinsic mobility limited by the acoustic phonon scattering is as high as a few thousands cm² V⁻¹ s⁻¹ with the hole mobility larger than the electron mobility. At the impurity density of 10¹⁸ cm⁻³, the charged impurity scattering starts to dominate and lowers the electron mobility to 101 cm² V⁻¹ s⁻¹ and the hole mobility to 72.2 cm² V⁻¹ s⁻¹. The high intrinsic mobility warrants the long and balanced diffusion length of charge carriers. With the control of impurities or defects as well as charge traps in these perovskites, enhanced efficiencies of solar cells with simplified device structures are promised.

Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals

Controllable doping of semiconductors is a fundamental technological requirement for electronic and optoelectronic devices. As intrinsic semiconductors, hybrid perovskites have so far been a phenomenal success in photovoltaics. The inability to dope these materials heterovalently (or aliovalently) has greatly limited their wider utilizations in electronics. Here we show an efficient in situ chemical route that achieves the controlled incorporation of trivalent cations (Bi(3+), Au(3+), or In(3+)) by exploiting the retrograde solubility behavior of perovskites. We term the new method dopant incorporation in the retrograde regime. We achieve Bi(3+) incorporation that leads to bandgap tuning (∼300 meV), 10(4) fold enhancement in electrical conductivity, and a change in the sign of majority charge carriers from positive to negative. This work demonstrates the successful incorporation of dopants into perovskite crystals while preserving the host lattice structure, opening new avenues to tailor the electronic and optoelectronic properties of this rapidly emerging class of solution-processed semiconductors.

Structure-Tuned Lead Halide Perovskite Nanocrystals

Colloidally stable suspensions of lead halide perovskite nanocrystals are prepared from high-quality lead halide nanocrystal seeds. Perovskite nanocrystals with different layered crystal structures are reported. These systems are well suited for investigations of the intrinsic photophysics and spectroscopy of organic-inorganic metal halide perovskites.

Impact of Film Stoichiometry on the Ionization Energy and Electronic Structure of CH3 NH3 PbI3 Perovskites

The electronic structure of a large sample set of CH3 NH3 PbI3 -based perovskites is studied. Combined investigations by UV/X-ray photoelectron spectroscopy and X-ray diffraction reveal that interstitials present in the film lead to changes in the occupied density of states close to the valence band, which in turn influences the performance of solar cells. Changes in elemental composition tune the ionization energy of the perovskite film by almost 1 eV without introducing significant amounts of gap states.

Degradation Mechanisms of Solution-Processed Planar Perovskite Solar Cells: Thermally Stimulated Current Measurement for Analysis of Carrier Traps

Degradation mechanisms of CH3 NH3 PbI3 -based planar perovskite solar cells (PSCs) are investigated using a thermally stimulated current technique. Hole traps lying above the valence-band edge of the CH3 NH3 PbI3 are detected in PSCs degraded by continuous simulated solar illumination. One source of the hole traps is the photodegradation of CH3 NH3 PbI3 in the presence of water.

Excited State Properties of Hybrid Perovskites

Metal halide perovskites have come to the attention of the scientific community for the progress achieved in solar light conversion. Energy sustainability is one of the priorities of our society, and materials advancements resulting in low-cost but efficient solar cells and large-area lighting devices represent a major goal for applied research. From a basic point of view, perovskites are an exotic class of hybrid materials combining some merits of organic and inorganic semiconductors: large optical absorption, large mobilities, and tunable band gap together with the possibility to be processed in solution. When a novel class of promising semiconductors comes into the limelight, lively discussions ensue on the photophysics of band-edge excitations, because just the states close to the band edge are entailed in energy/charge transport and light emission. This was the case several decades ago for III-V semiconductors, it has been up to 10 years ago for organics, and it is currently the case for perovskites. Our aim in this Account is to rationalize the body of experimental evidence on perovskite photophysics in a coherent theoretical framework, borrowing from the knowledge acquired over the years in materials optoelectronics. A crucial question is whether photon absorption leads to a population of unbound, conductive free charges or instead excitons, neutral and insulating bound states created by Coulomb interaction just below the energy of the band gap. We first focus on the experimental estimates of the exciton binding energy (Eb): at room temperature, Eb is comparable to the thermal energy kBT in MAPbI3 and increases up to values 2-3kBT in wide band gap MAPbBr3 and MAPbCl3. Statistical considerations predict that these values, even though comparable to or larger than thermal energy, let free carriers prevail over bound excitons for all levels of excitation densities relevant for devices. The analysis of photophysics evidence confirms that all hybrid halide perovskites behave as free-charge semiconductors. Thanks to such property, in combination with band gap energies covering the entire solar spectrum, perovskites represent a promising materials platform for highly efficient, single and multijunction solar cells. Concerning the use of perovskites as color-tunable materials in light emitting devices, free-charges are not the preferred species, as they recombine radiatively through a bimolecular process that is inefficient at the charge-injection levels typical of LED operation. Strategies to overcome this limit, and thus extend the use of perovskite materials beyond solar energy conversion, could be borrowed from inorganic semiconductor optoelectronics and include the fabrication of nanostructures with reduced dimensionality to alter the electronic density of states, as well as engineering composite materials.

Unraveling Charge Carriers Generation, Diffusion, and Recombination in Formamidinium Lead Triiodide Perovskite Polycrystalline Thin Film

We report on studies of the formamidinium lead triiodide (FAPbI3) perovskite film using time-resolved terahertz (THz) spectroscopy (TRTS) and flash photolysis to explore charge carriers generation, migration, and recombination. The TRTS results show that upon femtosecond excitation above the absorption edge, the initial high photoconductivity (∼75 cm(2) V(-1) s(-1)) remains constant at least up to 8 ns, which corresponds to a diffusion length of 25 μm. Pumping below the absorption edge results in a mobility of 40 cm(2) V(-1) s(-1) suggesting lower mobility of charge carriers located at the bottom of the conduction band or shallow sub-bandgap states. Furthermore, analysis of the THz kinetics reveals rising components of <1 and 20 ps, reflecting dissociation of excitons having different binding energies. Flash photolysis experiments indicate that trapped charge carriers persist for milliseconds.

Impedance Spectroscopic Indication for Solid State Electrochemical Reaction in (CH3NH3)PbI3 Films

Halide perovskite-based solar cells still have limited reproducibility, stability, and incomplete understanding of how they work. We track electronic processes in [CH3NH3]PbI3(Cl) ("perovskite") films in vacuo, and in N2, air, and O2, using impedance spectroscopy (IS), contact potential difference, and surface photovoltage measurements, providing direct evidence for perovskite sensitivity to the ambient environment. Two major characteristics of the perovskite IS response change with ambient environment, viz. -1- appearance of negative capacitance in vacuo or post-vacuo N2 exposure, indicating for the first time an electrochemical process in the perovskite, and -2- orders of magnitude decrease in the film resistance upon transferring the film from O2-rich ambient atmosphere to vacuum. The same change in ambient conditions also results in a 0.5 V decrease in the material work function. We suggest that facile adsorption of oxygen onto the film dedopes it from n-type toward intrinsic. These effects influence any material characterization, i.e., results may be ambient-dependent due to changes in the material's electrical properties and electrochemical reactivity, which can also affect material stability.