Quantitative analysis of adhesion and biofilm formation on hydrophilic and hydrophobic surfaces of clinical isolates of Staphylococcus epidermidis

Biofilm-forming associated genotypic and phenotypic characteristics of Staphylococcus spp. isolated from animals and air

Biological monitoring is performed to detect and analyze microorganisms that have continuously made an effort to survive in the environment. Of such microorganisms, Staphylococcus spp. is considered a common cause of nosocomial and environmental infections., Microbial Surface Components Recognizing Adhesive Matrix Molecules (MSCRAMMs) are required for the adhesion and biofilm formation of Staphylococci. Thirty-six and thirty-five Staphylococci isolated from animals and air, respectively, were analyzed. Biofilm formation and ten MSCRAMM genes were investigated using Congo red agar, tissue culture plate methods, and PCR. Airborne isolates were shown to have higher adherence and stronger biofilm formation than those from animals. The prevalence of MSCRAMM genes from air isolates was also higher than those from animals. Of the genes, eno was mainly associated with biofilm formation in both animals and airborne isolates (P<0.05). Moreover, the rate of airborne isolates harboring the eno gene was higher than in animal isolates. These results indicated that analysis of MSCRAMM genes with a phenotypic assay might be a helpful bacterial control system for the environment.

The influence of lens material and lens wear on the removal and viability of Staphylococcus epidermidis

PURPOSE

The aim of this study was to evaluate the influence of lens material and lens wear on the removal capability of Staphylococcus epidermidis. Assessment of viability of remaining adhered bacteria was another goal of this work. Four silicone hydrogel materials (galyfilcon A, balafilcon A, lotrafilcon A, lotrafilcon B) and one conventional hydrogel material (etafilcon A) were assayed.

METHODS

Detachment studies on S. epidermidis were carried out in a parallel plate flow chamber. Contact lenses (CLs) were fitted to the bottom of the flow chamber and a bacterial suspension was perfused into the system, promoting bacterial adhesion. Afterwards, detachment was stimulated using a multipurpose solution (MPS, ReNu Multiplus) and the percentage of removed bacteria estimated through microscopic observation and enumeration. Remaining adhered bacteria were stained with propidium iodide (PI) and enumerated in order to assess their viability. Additionally, the worn lenses were observed by confocal laser scanning microscopy (CLSM) to visualize bacterial distribution along the lens surfaces.

RESULTS

Bacterial removal was significant (p<0.05) for both unworn and worn galyfilcon A and etafilcon A. Galyfilcon A exhibited a detachment percentage of 59.1 and 63.5 while etafilcon A of 62.6 and 69.3, both for unworn and worn lenses, respectively. As far as bacterial viability is concerned, it was found that worn lenses exhibit a superior amount of non-viable bacteria than unworn CLs. Images obtained by CLSM revealed an irregular bacterial distribution for all lens materials.

CONCLUSIONS

It appears that surface and/or bulk structure of the lens material affects removal of S. epidermidis while CL wear influences their viability.

Skin microbiota: a source of disease or defence?

Microbes found on the skin are usually regarded as pathogens, potential pathogens or innocuous symbiotic organisms. Advances in microbiology and immunology are revising our understanding of the molecular mechanisms of microbial virulence and the specific events involved in the host-microbe interaction. Current data contradict some historical classifications of cutaneous microbiota and suggest that these organisms may protect the host, defining them not as simple symbiotic microbes but rather as mutualistic. This review will summarize current information on bacterial skin flora including Staphylococcus, Corynebacterium, Propionibacterium, Streptococcus and Pseudomonas. Specifically, the review will discuss our current understanding of the cutaneous microbiota as well as shifting paradigms in the interpretation of the roles microbes play in skin health and disease.

Environmental influences on biofilm development

Bacterial biofilms are found under diverse environmental conditions, from sheltered and specialized environments found within mammalian hosts to the extremes of biological survival. The process of forming a biofilm and the eventual return of cells to the planktonic state involve the coordination of vast amounts of genetic information. Nevertheless, the prevailing evidence suggests that the overall progression of this cycle within a given species or strain of bacteria responds to environmental conditions via a finite number of key regulatory factors and pathways, which affect enzymatic and structural elements that are needed for biofilm formation and dispersal. Among the conditions that affect biofilm development are temperature, pH, O2 levels, hydrodynamics, osmolarity, the presence of specific ions, nutrients, and factors derived from the biotic environment. The integration of these influences ultimately determines the pattern of behavior of a given bacterium with respect to biofilm development. This chapter will present examples of how environmental conditions affect biofilm development, most of which come from studies of species that have mammalian hosts.

Susceptibility of Staphylococcus epidermidis planktonic cells and biofilms to the lytic action of staphylococcus bacteriophage K

AIMS

To evaluate differences in biofilm or planktonic bacteria susceptibility to be killed by the polyvalent antistaphylococcus bacteriophage K.

METHODS AND RESULTS

In this study, the ability of phage K to infect and kill several clinical isolates of Staphylococcus epidermidis was tested. Strains were grown in suspension or as biofilms to compare the susceptibility of both phenotypes to the phage lytic action. Most strains (10/11) were susceptible to phage K, and phage K was also effective in reducing biofilm biomass after 24 h of challenging. Biofilm cells were killed at a lower rate than the log-phase planktonic bacteria but at similar rate as stationary phase planktonic bacteria.

CONCLUSIONS

Staphylococcus epidermidis biofilms and stationary growth phase planktonic bacteria are more resistant to phage K lysis than the exponential phase planktonic bacteria. SIGNIFICANCE OF STUDY: This study shows the differences in Staph. epidermidis susceptibility to be killed by bacteriophage K, when grown in biofilm or planktonic phenotypes.

Inhibition of bacterial adhesion and biofilm formation on zwitterionic surfaces

In this work, we report a study of long-chain zwitterionic poly(sulfobetaine methacrylate) (pSBMA) surfaces grafted via atom transfer radical polymerization (ATRP) for their resistance to bacterial adhesion and biofilm formation. Previously, we demonstrated that p(SBMA) is highly resistant to nonspecific protein adsorption. Poly(oligo(ethylene glycol) methyl ether methacrylate) (pOEGMA) grafted surfaces were also studied for comparison. Furthermore, we quantify how surface grafting methods will affect the long-term biological performance of the surface coatings. Thus, self-assembled monolayers (SAMs) of alkanethiols with shorter-chain oligo(ethylene glycol) (OEG) and mixed SO3-/N+(CH3)3 terminated groups were prepared on gold surfaces. The short-term adhesion (3 h) and the long-term accumulation (24 or 48 h) of two bacterial species (Gram-positive Staphylococcus epidermidis and Gram-negative Pseudomonas aeruginosa) on these surfaces were studied using a laminar flow chamber. Methyl-terminated (CH3) SAM on gold and a bare glass were chosen as references. p(SBMA) reduced short-term adhesion of S. epidermidis and P. aeruginosa relative to glass by 92% and 96%, respectively. For long-term biofilm formation, qualitative images showed that p(SBMA) dramatically reduced biofilm formation of S. epidermidis and P. aeruginosa as compared to glass.

Quantitative and morphological analysis of biofilm formation on self-assembled monolayers

In spite of intensive studies over the past two decades, the influence of surface properties on bacterial adhesion and biofilm formation remains unclear, particularly on late steps. In order to contribute to the elucidation of this point, we compared the impact of two different substrates on the formation of bacterial biofilm, by analysing bacterial amount and biofilm structure on hydrophilic and hydrophobic surfaces. The surfaces were constituted by NH(2)- and CH(3)-terminated self-assembled monolayers (SAMs) on silicon wafers, allowing to consider only the surface chemistry influence because wafers low roughness. A strain of Escherichia coli K12, able to produce biofilm on abiotic surfaces, was grown with culture durations varying from 4h to 336 h on both types of substrates. The amount of adhered bacteria was determined after detachment by both photometry at 630 nm and direct counting under light microscope, while the spatial distribution of adhered bacteria was observed by fluorescence microscopy. A general view of our results suggests a little influence of the surface chemistry on adherent bacteria amount, but a clear impact on dynamics of biofilm growth as well as on biofilm structure. This work points out how surface chemistry of substrates can influence the bacterial adhesion and the biofilm formation.

The Effect of Octylglucoside and Sodium Cholate in Staphylococcus epidermidis and Pseudomonas aeruginosa Adhesion to Soft Contact Lenses

PURPOSE

In this study, the effect of the natural surfactants octylglucoside and sodium cholate in inhibiting Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to conventional and silicone-hydrogel contact lenses (CL) was assessed. Hydrophobicity was also evaluated to conditioned and nonconditioned CL.

METHODS

The inhibiting effect of the tested surfactants was determined through "in vitro" adhesion studies to conditioned and nonconditioned CL followed by image acquisition and cell enumeration. Hydrophobicity was evaluated through contact angle measurements using the advancing type technique on air.

RESULTS

Sodium cholate exhibits a very low capability to inhibit microbial adhesion. Conversely, octylglucoside effectively inhibited microbial adhesion in both types of lenses. This surfactant exhibited an even greater performance than a multipurpose lens care solution used as control. Octylglucoside was the only tested surfactant able to lower the hydrophobicity of all CL, which can explain its high performance.

CONCLUSIONS

The results obtained in this study point out the potential of octylglucoside as a conditioning agent to prevent microbial colonization.

Molecular basis for preferential protective efficacy of antibodies directed to the poorly acetylated form of staphylococcal poly-N-acetyl-beta-(1-6)-glucosamine

Poly-N-acetyl-glucosamine (PNAG) is a staphylococcal surface polysaccharide influencing biofilm formation that is also under investigation for its vaccine potential. Antibodies that bind to PNAG with either low (<15%) or high (>90%) levels of acetate are superior at opsonic and protective activity compared with antibodies that bind to PNAG with only high levels (>70%) of acetate. PNAG is synthesized by four proteins encoded within the intercellular adhesin (ica) locus icaADBC. In Staphylococcus epidermidis, icaB encodes a deacetylase needed for the surface retention of PNAG and optimal biofilm formation. In this study, we confirmed that icaB plays a similar role in Staphylococcus aureus and found that an icaB mutant of S. aureus expressed significantly less surface-associated PNAG, was highly susceptible to antibody-independent opsonic killing that could not be enhanced with antibody raised against deacetylated PNAG (dPNAG), and had reduced survival capacity in a murine model of bacteremia. In contrast, an icaB-overexpressing strain produced primarily surface-associated PNAG, was more susceptible to opsonophagocytosis with antibody to dPNAG, and had increased survival in a murine bacteremia model. The highly acetylated secreted PNAG was more effective at blocking opsonic killing mediated by a human monoclonal antibody (mAb) to native PNAG than it was at blocking killing mediated by a human mAb to dPNAG, which by itself was a more effective opsonin. Retention of dPNAG on the surface of S. aureus is key to increased survival during bacteremia and also provides a molecular mechanism explaining the superior opsonic and protective activity of antibody to dPNAG.

Comparative antibody-mediated phagocytosis of Staphylococcus epidermidis cells grown in a biofilm or in the planktonic state

Staphylococcus epidermidis is an important cause of nosocomial infections. Virulence is attributable to elaboration of biofilms on medical surfaces that protect the organisms from immune system clearance. Even though leukocytes can penetrate biofilms, they fail to phagocytose and kill bacteria. The properties that make biofilm bacteria resistant to the immune system are not well characterized. In order to better understand the mechanisms of resistance of bacteria in biofilms to the immune system, we evaluated antibody penetration throughout the biofilm and antibody-mediated phagocytic killing of planktonic versus biofilm cells of S. epidermidis by using a rabbit antibody to poly-N-acetylglucosamine (PNAG). These antibodies are opsonic and protect against infection with planktonic cells of PNAG-positive Staphylococcus aureus and S. epidermidis. Antibody to PNAG readily penetrated the biofilm and bound to the same areas in the biofilm as did wheat germ agglutinin, a lectin known to bind to components of staphylococcal biofilms. However, biofilm cells were more resistant to opsonic killing than their planktonic counterparts in spite of producing more PNAG per cell than planktonic cells. Biofilm extracts inhibited opsonic killing mediated by antibody to PNAG, suggesting that the PNAG antigen within the biofilm matrix prevents antibody binding close to the bacterial cell surface, which is needed for efficient opsonic killing. Increased resistance of biofilm cells to opsonic killing mediated by an otherwise protective antibody was due not to a biofilm-specific phenotype but rather to high levels of antigen within the biofilm that prevented bacterial opsonization by the antibody.

Effects of growth in the presence of subinhibitory concentrations of dicloxacillin on Staphylococcus epidermidis and Staphylococcus haemolyticus biofilms

Low concentrations of antibiotics can inhibit microbial adherence to medical device surfaces. However, little is known about the changes that occur in the physiology of bacteria within biofilms formed in the presence of subinhibitory (sub-MIC) concentrations of antibiotics. In this study, the densities and matrix compositions of biofilms formed by two coagulase-negative Staphylococcus species in the absence and in the presence of sub-MIC concentrations of dicloxacillin were evaluated. Biofilms formed in the presence of sub-MIC concentrations of dicloxacillin contained less biomass, and there were notable changes in the composition of the biofilm matrix. Changes in the spatial structure were also verified by confocal scanning laser microscopy, indicating that biofilms grown in the presence of sub-MIC concentrations of dicloxicilln had a lower cell density. Physiological alterations in the bacteria within biofilms grown in the presence of subinhibitory concentrations of the antibiotic were also evaluated. The results showed that there were differences in bacterial surface characteristics when cultures were grown in the presence of sub-MIC concentrations of dicloxacillin, including decreased hydrophobicity and decreased expression of the exopolysaccharide poly-N-acetylglucosamine. The elemental composition of the cell surface was also analyzed, and whereas in Staphylococcus epidermidis there were decreases in the oxygen and nitrogen contents, in Staphylococcus haemolyticus there were increases in these two parameters. Additionally, increases in resistance to several antibiotics were observed for the cells within biofilms formed in the presence of dicloxacillin.

Surface antibacterial characteristics of plasma-modified polyethylene

The antibacterial characteristics of triclosan- or bronopol-coated and plasma-modified polyethylene (PE) are investigated. The modified PE samples exhibit excellent bactericidal effects against Escherichia coli and Staphylococcus aureus even when the bacteria concentration in the suspension is 10(6) colony forming units (CFU)/mL. However, when the concentration exceeds 10(8) CFU/mL, the materials fail to develop noticeable resistance to large amount of bacteria because of the formation of a bacterial biofilm on their surfaces. The PE treated by this relatively simple technique possesses excellent antimicrobial properties and is useful in biomedical and disinfection applications because the bacteria concentrations in most situations are well below 10(6) CFU/mL.

Comparative assessment of antibiotic susceptibility of coagulase-negative staphylococci in biofilm versus planktonic culture as assessed by bacterial enumeration or rapid XTT colorimetry

OBJECTIVES

To quantitatively compare the antibiotic susceptibility of biofilms formed by the coagulase-negative staphylococci (CoNS) Staphylococcus epidermidis and Staphylococcus haemolyticus with the susceptibility of planktonic cultures.

METHODS

Several CoNS strains were grown planktonically or as biofilms to determine the effect of the mode of growth on the level of susceptibility to antibiotics with different mechanisms of action. The utility of a new, rapid colorimetric method that is based on the reduction of a tetrazolium salt (XTT) to measure cell viability was tested by comparison with standard bacterial enumeration techniques. A 6 h kinetic study was performed using dicloxacillin, cefazolin, vancomycin, tetracycline and rifampicin at the peak serum concentration of each antibiotic.

RESULTS

In planktonic cells, inhibitors of cell wall synthesis were highly effective over a 3 h period. Biofilms were much less susceptible than planktonic cultures to all antibiotics tested, particularly inhibitors of cell wall synthesis. The susceptibility to inhibitors of protein and RNA synthesis was affected by the biofilm phenotype to a lesser degree. Standard bacterial enumeration techniques and the XTT method produced equivalent results both in biofilms and planktonic assays.

CONCLUSIONS

This study provides a more accurate comparison between the antibiotic susceptibilities of planktonic versus biofilm populations, because the cell densities in the two populations were similar and because we measured the concentration required to inhibit bacterial metabolism rather than to eradicate the entire bacterial population. While the biofilm phenotype is highly resistant to antibiotics that target cell wall synthesis, it is fairly susceptible to antibiotics that target RNA and protein synthesis.