Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition

Traction-separation laws of graphene grain boundaries

Molecular dynamics simulations are used to extract the traction-separation laws (TSLs) of symmetric grain boundaries of graphene. Grain boundaries with realistic atomic structures are constructed using different types of dislocations. The TSLs of grain boundaries are extracted by using cohesive zone volume elements (CZVEs) ahead of the crack tip. The traction and separation of each cohesive zone volume element are calculated during the crack growth. The traction and separation values obtained for the cohesive elements predict that the TSLs of grain boundaries have a bilinear form. The areas under the traction-separation curves are used to calculate the separation energy of the grain boundaries. The results show that as the grain boundary misorientation angle increases the separation energy of the grain boundaries decreases. The impact of temperature on the traction separation laws is studied. The results show that, with an increase of the temperature from 0.1 K to 300 K, the separation energy first increases to reach its peak at around 25 K and then slightly decreases.

Graphene preparation and graphite exfoliation

The synthesis of Graphene is critical to achieving its functions in practical applications. Different methods have been used to synthesis graphene, but graphite exfoliation is considered the simplest way to produce graphene and graphene oxide. In general, controlling the synthesis conditions to achieving the optimum yield, keeping the pristine structure to realize on-demand properties, minimum layers with the smallest lateral size, and minimum oxygen content are the most obstacles experienced by researchers. Each application requires a specific graphene model, graphene oxides GO, or even graphene intercalated compounds (GIC) depending on synthesis conditions and approach. This paper reviewed and summarized the most researches in this field and focusing on exfoliation methods.

Application of advanced materials in sonophotocatalytic processes for the remediation of environmental pollutants

Significant advances in various industrial processes have resulted in the discharge of toxic pollutants into the environment. Consequently, it is essential to develop efficient wastewater treatment processes to reduce water contamination and increase recycling/reuse. Photocatalytic degradation is considered as an efficient method for the degradation of toxic pollutants in industrial wastewater. However, the use of photocatalytic approaches is associated with numerous limitations, such as lengthy procedures and the necessity for large amounts of catalysts. Hence, it has been proposed that photocatalysis could be combined with other techniques, including sonolysis, electrochemical, photothermal, microwave, ultrafiltration, and biological reactor. The integration of photocatalysis with sonolysis could be remarkably beneficial for environmental remediation. The combination of these processes has the advantages of using uniformly dispersed catalysts, regeneration of the catalyst surface, improved mass transfer, enhanced surface area due to smaller catalyst particles, and production of more active radicals for the degradation of organic pollutants. In this review, an overview on employing sonophotocatalysis for the removal of toxic organic contaminants from aqueous environments is provided. Additionally, the limitations of photocatalysis alone and the fundamental sonophotocatalytic mechanistic pathways are discussed. The importance of utilizing advanced two-dimensional (2D) semiconductor materials in sonophotocatalysis and the common synthetic approaches for the preparation of 2D materials are also highlighted. Lastly, the review provides comprehensive insights into different materials based on metal oxides, chalcogenides, graphene, and metal organic frameworks (MOFs), which are involved in sonophotocatalytic processes employed for the remediation of environmental pollutants.

The Emergence and Evolution of Borophene

Neighboring carbon and sandwiched between non-metals and metals in the periodic table of the elements, boron is one of the most chemically and physically versatile elements, and can be manipulated to form dimensionally low planar structures (borophene) with intriguing properties. Herein, the theoretical research and experimental developments in the synthesis of borophene, as well as its excellent properties and application in many fields, are reviewed. The decade-long effort toward understanding the size-dependent structures of boron clusters and the theory-directed synthesis of borophene, including bottom-up approaches based on different foundations, as well as up-down approaches with different exfoliation modes, and the key factors influencing the synthetic effects, are comprehensively summarized. Owing to its excellent chemical, electronic, mechanical, and thermal properties, borophene has shown great promise in supercapacitor, battery, hydrogen-storage, and biomedical applications. Furthermore, borophene nanoplatforms used in various biomedical applications, such as bioimaging, drug delivery, and photonic therapy, are highlighted. Finally, research progress, challenges, and perspectives for the future development of borophene in large-scale production and other prospective applications are discussed.

Silicene Quantum Capacitance Dependent Frequency Readout to a Label-Free Detection of DNA Hybridization- A Simulation Analysis

The use of deoxyribonucleic acid (DNA) hybridization to detect disease-related gene expression is a valuable diagnostic tool. An ion-sensitive field-effect transistor (ISFET) with a graphene layer has been utilized for detecting DNA hybridization. Silicene is a two-dimensional silicon allotrope with structural properties similar to graphene. Thus, it has recently experienced intensive scientific research interest due to its unique electrical, mechanical, and sensing characteristics. In this paper, we proposed an ISFET structure with silicene and electrolyte layers for the label-free detection of DNA hybridization. When DNA hybridization occurs, it changes the ion concentration in the surface layer of the silicene and the pH level of the electrolyte solution. The process also changes the quantum capacitance of the silicene layer and the electrical properties of the ISFET device. The quantum capacitance and the corresponding resonant frequency readout of the silicene and graphene are compared. The performance evaluation found that the changes in quantum capacitance, resonant frequency, and tuning ratio indicate that the sensitivity of silicene is much more effective than graphene.

Asymmetric response of interfacial water to applied electric fields

Our understanding of the dielectric response of interfacial water, which underlies the solvation properties and reaction rates at aqueous interfaces, relies on the linear response approximation: an external electric field induces a linearly proportional polarization. This implies antisymmetry with respect to the sign of the field. Atomistic simulations have suggested, however, that the polarization of interfacial water may deviate considerably from the linear response. Here we present an experimental study addressing this issue. We measured vibrational sum-frequency generation spectra of heavy water (D₂O) near a monolayer graphene electrode, to study its response to an external electric field under controlled electrochemical conditions. The spectra of the OD stretch show a pronounced asymmetry for positive versus negative electrode charge. At negative charge below 5 × 10¹² electrons per square centimetre, a peak of the non-hydrogen-bonded OD groups pointing towards the graphene surface is observed at a frequency of 2,700 per centimetre. At neutral or positive electrode potentials, this 'free-OD' peak disappears abruptly, and the spectra display broad peaks of hydrogen-bonded OD species (at 2,300-2,650 per centimetre). Miller's rule¹ connects the vibrational sum-frequency generation response to the dielectric constant. The observed deviation from the linear response for electric fields of about ±3 × 10⁸ volts per metre calls into question the validity of treating interfacial water as a simple dielectric medium.

2D Materials Enabled Next-Generation Integrated Optoelectronics: from Fabrication to Applications

2D materials, such as graphene, black phosphorous and transition metal dichalcogenides, have gained persistent attention in the past few years thanks to their unique properties for optoelectronics. More importantly, introducing 2D materials into silicon photonic devices will greatly promote the performance of optoelectronic devices, including improvement of response speed, reduction of energy consumption, and simplification of fabrication process. Moreover, 2D materials meet the requirements of complementary metal-oxide-semiconductor compatible silicon photonic manufacturing. A comprehensive overview and evaluation of state-of-the-art 2D photonic integrated devices for telecommunication applications is provided, including light sources, optical modulators, and photodetectors. Optimized by unique structures such as photonic crystal waveguide, slot waveguide, and microring resonator, these 2D material-based photonic devices can be further improved in light-matter interactions, providing a powerful design for silicon photonic integrated circuits.

Magnetic-Field-Driven Electron Dynamics in Graphene

Graphene exhibits unique optoelectronic properties originating from the band structure at the Dirac points. It is an ideal model structure to study the electronic and optical properties under the influence of the applied magnetic field. In graphene, electric field, laser pulse, and voltage can create electron dynamics which is influenced by momentum dispersion. However, computational modeling of momentum-influenced electron dynamics under the applied magnetic field remains challenging. Here, we perform computational modeling of the photoexcited electron dynamics achieved in graphene under an applied magnetic field. Our results show that magnetic field leads to local deviation from momentum conservation for charge carriers. With the increasing magnetic field, the delocalization of electron probability distribution increases and forms a cyclotron-like trajectory. Our work facilitates understanding of momentum resolved magnetic field effect on non-equilibrium properties of graphene, which is critical for optoelectronic and photovoltaic applications.

Practical Route for the Low-Temperature Growth of Large-Area Bilayer Graphene on Polycrystalline Nickel by Cold-Wall Chemical Vapor Deposition

We report a practical chemical vapor deposition (CVD) route to produce bilayer graphene on a polycrystalline Ni film from liquid benzene (C6H6) source at a temperature as low as 400 °C in a vertical cold-wall reaction chamber. The low activation energy of C6H6 and the low solubility of carbon in Ni at such a low temperature play a key role in enabling the growth of large-area bilayer graphene in a controlled manner by a Ni surface-mediated reaction. All experiments performed using this method are reproducible with growth capabilities up to an 8 in. wafer-scale substrate. Raman spectra analysis, high-resolution transmission electron microscopy, and selective area electron diffraction studies confirm the growth of Bernal-stacked bilayer graphene with good uniformity over large areas. Electrical characterization studies indicate that the bilayer graphene behaves much like a semiconductor with predominant p-type doping. These findings provide important insights into the wafer-scale fabrication of low-temperature CVD bilayer graphene for next-generation nanoelectronics.

Reducing metal/graphene contact resistance via N, N-dimethylacetamide-assisted clean fabrication process

Contact resistance (R_C) is of great importance for radio frequency (RF) applications of graphene, especially graphene field effect transistors (FETs) with short channel. FETs and transmission line model test structures based on chemical vapor deposition grown graphene are fabricated. The effects of employing traditional lithography solvent (Acetone) and strong solvents for photo resist, such as N, N-Dimethylacetamide (ZDMAC) and N-Methyl pyrrolidone (NMP), are systematically investigated. It was found that ZDMAC and NMP have more proficiency than acetone to remove the photo-resist residues and contaminations attached on graphene surface, enabling clean surface of graphene. However, strong solvents are found to destroy the lattice structure of graphene channel and induce defects in graphene lattice. Clean surface contributes to a significant reduction in theR_Cbetween graphene channel and metal electrode, and the defects introduced on graphene surface underneath metal electrodes also contribute the reduction ofR_C. But defects and deformation of lattice will increase the resistance in graphene channel and lead to the compromise of device performance. To address this problem, a mix wet-chemical approach employing both acetone and ZDMAC was developed in our study to realize a 19.07% reduction ofR_C, without an unacceptable mass production of defects.

Large-Size Suspended Mono-Layer Graphene Film Transfer Based on the Inverted Floating Method

Suspended graphene can perfectly present the excellent material properties of graphene, which has a good application prospect in graphene sensors. The existing suspended graphene pressure sensor has several problems that need to be solved, one of which is the fabrication of a suspended sample. It is still very difficult to obtain large-size suspended graphene films with a high integrity that are defect-free. Based on the simulation and analysis of the kinetic process of the traditional suspended graphene release process, a novel setup for large-size suspended graphene release was designed based on the inverted floating method (IFM). The success rate of the single-layer suspended graphene with a diameter of 200 μm transferred on a stainless-steel substrate was close to 50%, which is greatly improved compared with the traditional impregnation method. The effects of the defects and burrs around the substrate cavity on the stress concentration of graphene transfer explain why the transfer success rate of large-size suspended graphene is not high. This research lays the foundation for providing large-size suspended graphene films in the area of graphene high-precision sensors.

Substrate Engineering for CVD Growth of Single Crystal Graphene

Single crystal graphene (SCG) has attracted enormous attention for its unique potential for next-generation high-performance optoelectronics. In the absence of grain boundaries, the exceptional intrinsic properties of graphene are preserved by SCG. Currently, chemical vapor deposition (CVD) has been recognized as an effective method for the large-scale synthesis of graphene films. However, polycrystalline films are usually obtained and the present grain boundaries compromise the carrier mobility, thermal conductivity, optical properties, and mechanical properties. The scalable and controllable synthesis of SCG is challenging. Recently, much attention has been attracted by the engineering of large-size single-crystal substrates for the epitaxial CVD growth of large-area and high-quality SCG films. In this article, a comprehensive and comparative review is provided on the selection and preparation of various single-crystal substrates for CVD growth of SCG under different conditions. The growth mechanisms, current challenges, and future development and perspectives are discussed.

Sulfur-Doped Graphdiyne as a High-Capacity Anode Material for Lithium-Ion Batteries

Heteroatom doping is regarded as a promising approach to enhance the electrochemical performance of carbon materials, while the poor controllability of heteroatoms remains the main challenge. In this context, sulfur-doped graphdiyne (S-GDY) was successfully synthesized on the surface of copper foil using a sulfur-containing multi-acetylene monomer to form a uniform film. The S-GDY film possesses a porous structure and abundant sulfur atoms decorated homogeneously in the carbon skeleton, which facilitate the fast diffusion and storage of lithium ions. The lithium-ion batteries (LIBs) fabricated with S-GDY as anode exhibit excellent performance, including the high specific capacity of 920 mA h g⁻¹ and superior rate performances. The LIBs also show long-term cycling stability under the high current density. This result could potentially provide a modular design principle for the construction of high-performance anode materials for lithium-ion batteries.

High-Frequency Graphene Base Hot-Electron Transistor

The integration of graphene and other two-dimensional (2D) materials with existing silicon semiconductor technology is highly desirable. This is due to the diverse advantages and potential applications brought about by the consequent miniaturization of the resulting electronic devices. Nevertheless, such devices that can operate at very high frequencies for high-speed applications are eminently preferred. In this work, we demonstrate a vertical graphene base hot-electron transistor that performs in the radio frequency regime. Our device exhibits a relatively high current density (∼200 A/cm²), high common base current gain (α* ∼ 99.2%), and moderate common emitter current gain (β* ∼ 2.7) at room temperature with an intrinsic current gain cutoff frequency of around 65 GHz. Furthermore, cutoff frequency can be tuned from 54 to 65 GHz by varying the collector-base bias. We anticipate that this proposed transistor design, built by the integrated 2D material and silicon semiconductor technology, can be a potential candidate to realize extra fast radio frequency tunneling hot-carrier electronics.

Magnetotransport in hybrid InSe/monolayer graphene on SiC

The magnetotransport properties of a hybrid InSe/monolayer graphene in a SiC system are systematically studied. Compared to those of its bare graphene counterpart, in InSe/graphene, we can effectively modify the carrier density, mobility, effective mass, and electron-electron (e-e) interactions enhanced by weak disorder. We show that in bare graphene and hybrid InSe/graphene systems, the logarithmic temperature (lnT) dependence of the Hall slope R _H = δR _xy /δB = δρ _xy /δB can be used to probe e-e interaction effects at various temperatures even when the measured resistivity does not show a lnT dependence due to strong electron-phonon scattering. Nevertheless, one needs to be certain that the change of R _H is not caused by an increase of the carrier density by checking the magnetic field position of the longitudinal resistivity minimum at different temperatures. Given the current challenges in gating graphene on SiC with a suitable dielectric layer, our results suggest that capping a van der Waals material on graphene is an effective way to modify the electronic properties of monolayer graphene on SiC.

Highly Skin-Conformal Laser-Induced Graphene-Based Human Motion Monitoring Sensor

Bio-compatible strain sensors based on elastomeric conductive polymer composites play pivotal roles in human monitoring devices. However, fabricating highly sensitive and skin-like (flexible and stretchable) strain sensors with broad working range is still an enormous challenge. Herein, we report on a novel fabrication technology for building elastomeric conductive skin-like composite by mixing polymer solutions. Our e-skin substrates were fabricated according to the weight of polydimethylsiloxane (PDMS) and photosensitive polyimide (PSPI) solutions, which could control substrate color. An e-skin and 3-D flexible strain sensor was developed with the formation of laser induced graphene (LIG) on the skin-like substrates. For a one-step process, Laser direct writing (LDW) was employed to construct superior durable LIG/PDMS/PSPI composites with a closed-pore porous structure. Graphene sheets of LIG coated on the closed-porous structure constitute a deformable conductive path. The LIG integrated with the closed-porous structure intensifies the deformation of the conductive network when tensile strain is applied, which enhances the sensitivity. Our sensor can efficiently monitor not only energetic human motions but also subtle oscillation and physiological signals for intelligent sound sensing. The skin-like strain sensor showed a perfect combination of ultrawide sensing range (120% strain), large sensitivity (gauge factor of ~380), short response time (90 ms) and recovery time (140 ms), as well as superior stability. Our sensor has great potential for innovative applications in wearable health-monitoring devices, robot tactile systems, and human-machine interface systems.

Photolithographically-patterned C-MEMS graphene by carbon diffusion through nickel

In recent years the most studied carbon allotrope has been graphene, due to the outstanding properties that this two-dimensional material exhibits; however, it turns out to be a difficult material to produce, pattern, and transfer to a device substrate without contamination. Carbon microelectromechanical systems are a versatile technology used to create nano/micro carbon devices by pyrolyzing a patterned photoresist, making them highly attractive for industrial applications. Furthermore, recent works have reported that pyrolytic carbon material can be graphitized by the diffusion of carbon atoms through a transition metal layer. In this work we take advantage of the latter two methods in order to produce multilayer graphene by improving the molecular ordering of photolithographically-defined pyrolytic carbon microstructures, through the diffusion (annealing) of carbon atoms through nickel, and also to eliminate any further transfer process to a device substrate. The allotropic nature of the final carbon microstructures was inspected by Raman spectroscopy (AverageI_D/I_Gof 0.2348 ± 0.0314) and TEM clearly shows well-aligned lattice planes of 3.34 Å fringe separation. These results were compared to measurements made on pyrolytic carbon (AverageI_D/I_Gof 0.9848 ± 0.0235) to confirm that our method is capable of producing a patterned multilayer graphene material directly on a silicon substrate.

Spiers Memorial Lecture. Carbon nanostructures by macromolecular design - from branched polyphenylenes to nanographenes and graphene nanoribbons

Nanographenes (NGs) and graphene nanoribbons (GNRs) are unique connectors between the domains of 1D-conjugated polymers and 2D-graphenes. They can be synthesized with high precision by oxidative flattening processes from dendritic or branched 3D-polyphenylene precursors. Their size, shape and edge type enable not only accurate control of classical (opto)electronic properties, but also access to unprecedented high-spin structures and exotic quantum states. NGs and GNRs serve as active components of devices such as field-effect transistors and as ideal objects for nanoscience. This field of research includes their synthesis after the deposition of suitable monomers on surfaces. An additional advantage of this novel concept is in situ monitoring of the reactions by scanning tunnelling microscopy and electronic characterization of the products by scanning tunnelling spectroscopy.

Protein-assisted scalable mechanochemical exfoliation of few-layer biocompatible graphene nanosheets

A facile method to produce few-layer graphene (FLG) nanosheets is developed using protein-assisted mechanical exfoliation. The predominant shear forces that are generated in a planetary ball mill facilitate the exfoliation of graphene layers from graphite flakes. The process employs a commonly known protein, bovine serum albumin (BSA), which not only acts as an effective exfoliation agent but also provides stability by preventing restacking of the graphene layers. The latter is demonstrated by the excellent long-term dispersibility of exfoliated graphene in an aqueous BSA solution, which exemplifies a common biological medium. The development of such potentially scalable and toxin-free methods is critical for producing cost-effective biocompatible graphene, enabling numerous possible biomedical and biological applications. A methodical study was performed to identify the effect of time and varying concentrations of BSA towards graphene exfoliation. The fabricated product has been characterized using Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The BSA-FLG dispersion was then placed in media containing Astrocyte cells to check for cytotoxicity. It was found that lower concentrations of BSA-FLG dispersion had only minute cytotoxic effects on the Astrocyte cells.

Phosphomolybdic Acid-Modified Monolayer Graphene Anode for Efficient Organic and Perovskite Light-Emitting Diodes

Graphene is a promising flexible transparent electrode, and significant progress in graphene-based optoelectronic devices has been accomplished by reducing the sheet resistance and tuning the work function. Herein, phosphomolybdic acid (PMA) is proposed as a novel p-type chemical dopant for graphene, and the optical and electrical properties of graphene are investigated systematically. As a result, the monolayer graphene electrode with lower sheet resistance and work function are obtained while maintaining a high transmittance. The Raman spectrum proves the p-type doping effect of PMA on graphene, and the X-ray photoelectron spectroscopy results reveal the mechanism, which is that the electrons transfer from graphene to PMA through the Mo-O-C bond. Furthermore, using the PMA-doped graphene anode, organic and perovskite light-emitting diodes obtained the maximum efficiencies of 129.3 and 15.6 cd/A with an increase of 50.8 and 36.8% compared with the pristine counterparts, respectively. This work confirms that PMA is a potential p-type chemical dopant to achieve an ideal graphene electrode and demonstrates the feasibility of PMA-doped graphene in the practical application of next-generation displays and solid-state lighting.

Moiré-Potential-Induced Band Structure Engineering in Graphene and Silicene

A moiré pattern results from the projection of one periodic pattern to another with relative lattice constant or misalignment and provides great periodic potential to modify the electronic properties of pristine materials. In this Review, recent research on the effect of the moiré superlattice on the electronic structures of graphene and silicene, both of which possess a honeycomb lattice, is focused on. The moiré periodic potential is introduced by the interlayer interaction to realize abundant phenomena, including new generation of Dirac cones, emergence of Van Hove singularities (vHs) at the cross point of two sets of Dirac cones, Mott-like insulating behavior at half-filling state, unconventional superconductivity, and electronic Kagome lattice and flat band with nontrivial edge state. The role of interlayer coupling strength, which is determined by twist angle and buckling degree, in these exotic properties is discussed in terms of both the theoretical prediction and experimental measurement, and finally, the challenges and outlook for this field are discussed.

Dissolution-precipitation growth of uniform and clean two dimensional transition metal dichalcogenides

Two dimensional transition metal dichalcogenides (TMDCs) have attracted much interest and shown promise in many applications. However, it is challenging to obtain uniform TMDCs with clean surfaces, because of the difficulties in controlling the way the reactants are supplied to the reaction in the current chemical vapor deposition growth process. Here, we report a new growth approach called 'dissolution-precipitation' (DP) growth, where the metal sources are sealed inside glass substrates to control their feeding to the reaction. Noteworthy, the diffusion of metal source inside glass to its surface provides a uniform metal source on the glass surface, and restricts the TMDC growth to only a surface reaction while eliminating unwanted gas-phase reaction. This feature gives rise to highly uniform monolayer TMDCs with a clean surface on centimeter-scale substrates. The DP growth works well for a large variety of TMDCs and their alloys, providing a solid foundation for the controlled growth of clean TMDCs by the fine control of the metal source.

The effect of catalytic copper pretreatments on CVD graphene growth at different stages

The controllable synthesis of high-quality and large-area graphene by chemical vapor deposition (CVD) remains a challenge nowadays. The massive grain boundaries in graphene grown on polycrystalline Cu by CVD significantly reduce its carrier mobility, limiting its application in high-performance electronic devices. Here, we confirm that the synergetic pretreatment of Cu with electropolishing and surface oxidation is a more efficient way to further suppress the graphene nucleation density (GND) and to accelerate the growth rate of the graphene domain by CVD. With increasing the growth time, we found that the increasing amount of GND and growth rate of the graphene domain were both decreasing during the whole CVD process when the Cu surface was not oxidized. By contrast, they kept growing over time when the Cu surface was pre-oxidized, which suggested that the change trends of the effects on the GND and growth rate between the Cu surface morphology and oxygen were opposite in the CVD process. In addition, not only the domain shape, but the number of graphene domain layers were impacted as well, and a large number of irregular ellipse graphene wafers with dendritic multilayer emerged when the Cu surface was oxidized.

Wafer-Scale Integration of Graphene-Based Photonic Devices

Graphene and related materials can lead to disruptive advances in next-generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (≥5000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapor deposition (CVD) of single layer graphene (SLG) matrices comprising up to ∼12000 individual single crystals, grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ∼80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ∼5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ∼0.25, 0.45, 0.75, 1 dB V-1 for device lengths ∼30, 60, 90, 120 μm. The data rate is up to 20 Gbps. Encapsulation with single-layer hexagonal boron nitride (hBN) is used to protect SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. The processes are compatible with full automation. This paves the way for large scale production of graphene-based photonic devices.

Positive and negative photoconductivity characteristics in CsPbBr3/graphene heterojunction

Broadband response photodetectors have received great research interest in optical sensing field. Usually, materials with positive photoconductivity (PPC) are general and the lack of negative photoconductivity (NPC) materials limits the application of photoelectric effect, especially in the broadband photodetecting field. Therefore, the finding of NPC materials is very important. Integrating PPC and NPC response into a single device is extremely meaningful to the development of broadband photodetector. In this work, we fabricated CsPbBr₃ nanocrystals (NCs)-multilayered graphene heterojunction, which achieved persistent NPC response to ultra violet (300-390 nm) and PPC response to visible light (420-510 nm). The persistent NPC relies on the desorption of H₂O vapor, and varies its intensity with the power intensity of laser. The PPC relies on the holes transmission from NCs to graphene. The recombination of NPC and PPC effect provides background knowledge for the development of broadband photodetector.

Growth and in situ characterization of 2D materials by chemical vapour deposition on liquid metal catalysts: a review

2D materials (2DMs) have now been established as unique and attractive alternatives to replace current technological materials in a number of applications. Chemical vapour deposition (CVD), is undoubtedly the most renowned technique for thin film synthesis and meets all requirements for automated large-scale production of 2DMs. Currently most CVD methods employ solid metal catalysts (SMCat) for the growth of 2DMs however their use has been found to induce structural defects such as wrinkles, fissures, and grain boundaries among others. On the other hand, liquid metal catalysts (LMCat), constitute a possible alternative for the production of defect-free 2DMs albeit with a small temperature penalty. This review is a comprehensive report of past attempts to employ LMCat for the production of 2DMs with emphasis on graphene growth. Special attention is paid to the underlying mechanisms that govern crystal growth and/or grain consolidation and film coverage. Finally, the advent of online metrology which is particularly effective for monitoring the chemical processes under LMCat conditions is also reviewed and certain directions for future development are drawn.

Micro-photoluminescence of Carbon Dots Deposited on Twisted Double-Layer Graphene Grown by Chemical Vapor Deposition

Carbon-based nanomaterials, such as carbon dots (CDs) and graphene (Gr), feature outstanding optical and electronic properties. Hence, their integration in optoelectronic and photonic devices is easier thanks to their low dimensionality and offers the possibility to reach high-quality performances. In this context, the combination of CDs and Gr into new nanocomposite materials CDs/Gr can further improve their optoelectronic properties and eventually create new ones, paving the way for the development of advanced carbon nanotechnology. In this work, we have thoroughly investigated the structural and emission properties of CDs deposited on single-layer and bilayer graphene lying on a SiO₂/Si substrate. A systematic Raman analysis points out that bilayer (BL) graphene grown by chemical vapor deposition does not always respect the Bernal (AB) stacking, but it is rather a mixture of twisted bilayer (t-BL) featuring domains with different twist angles. Moreover, in-depth micro-photoluminescence measurements, combined with atomic force microscopy (AFM) morphological analysis, show that CD emission efficiency is strongly depleted by the presence of graphene and in particular is dependent on the number of layers as well as on the twist angle of BL graphene. Finally, we propose a model which explains these results on the basis of photoinduced charge-transfer processes, taking into account the energy levels of the hybrid nanosystem formed by coupling CDs with t-BL/SiO₂.

Single-Step Direct Growth of Graphene on Cu Ink toward Flexible Hybrid Electronic Applications by Plasma-Enhanced Chemical Vapor Deposition

Highly customized and free-formed products in flexible hybrid electronics (FHE) require direct pattern creation such as inkjet printing (IJP) to accelerate product development. In this work, we demonstrate the direct growth of graphene on Cu ink deposited on polyimide (PI) by means of plasma-enhanced chemical vapor deposition (PECVD), which provides simultaneous reduction, sintering, and passivation of the Cu ink and further reduces its resistivity. We investigate the PECVD growth conditions for optimizing the graphene quality on Cu ink and find that the defect characteristics of graphene are sensitive to the H₂/CH₄ ratio at higher total gas pressure during the growth. The morphology of Cu ink after the PECVD process and the dependence of the graphene quality on the H₂/CH₄ ratio may be attributed to the difference in the corresponding electron temperature. Therefore, this study paves a new pathway toward efficient growth of high-quality graphene on Cu ink for applications in flexible electronics and Internet of Things (IoT).

Ordered Mesoporous Carbons with Graphitic Tubular Frameworks by Dual Templating for Efficient Electrocatalysis and Energy Storage

Ordered mesoporous carbons (OMCs) have attracted considerable interest owing to their broad utility. OMCs reported to date comprise amorphous rod-like or tubular or graphitic rod-like frameworks, which exhibit tradeoffs between conductivity and surface area. Here we report ordered mesoporous carbons constructed with graphitic tubular frameworks (OMGCs) with tunable pore sizes and mesostructures via dual templating, using mesoporous silica and molybdenum carbide as exo- and endo-templates, respectively. OMGCs simultaneously realize high electrical conductivity and large surface area and pore volume. Benefitting from these features, Ru nanoparticles (NPs) supported on OMGC exhibit superior catalytic activity for alkaline hydrogen evolution reaction and single-cell performance for anion exchange membrane water electrolysis compared to Ru NPs on other OMCs and commercial catalysts. Further, the OMGC-based full-carbon symmetric cell demonstrates excellent performances for Li-ion capacitors.

Facile synthesis of a heterostructured lanthanum-doped SnO2 anchored with rGO for asymmetric supercapacitors and photocatalytic dye degradation

Owing to its good redox properties, excellent electron–hole pair generation, wide band gap and outstanding chemical stability, SnO2 has been considered as a promising bifunctional material for supercapacitors as well as photocatalysts, but its poor conductivity and low surface area limit the specific capacitance and catalytic efficiency.

Graphene, an epoch-making material in RFID technology: a detailed overview

Many researchers claim that graphene, a specially studied carbon allotrope, has a single layer of atoms organized in a two-dimensional honeycomb lattice.

Catalyst-free growth of single- to few-layered graphene on ionic liquid surfaces at room temperature

Single- to few-layered graphene is successfully fabricated on ionic liquid surfaces by a modified arc-discharge evaporation method without the assistance of catalysts and at room temperature.

Multilayer graphene in situ formed in carbonized waste paper with the synergism of nickel and sodium

MLG is in situ formed with the synergism of nickel and sodium. The porous structure of amorphous carbon is effectively optimized with the formation of MLG and its capacitive performance is clearly improved.

Copper(ii) ions supported on functionalized graphene oxide: an organometallic nanocatalyst for oxidative amination of azoles via C–H/C–N bond activation

Graphene oxide (GO) was chemically modified with para-aminobenzoic acid (PABA) to immobilize copper(ii) ions on its surface and used as a nanocatalyst for the oxidative C (sp²)–H bond amination reaction.

Nanoscale structural and electrical properties of graphene grown on AlGaN by catalyst-free chemical vapor deposition

The integration of graphene (Gr) with nitride semiconductors is highly interesting for applications in high-power/high-frequency electronics and optoelectronics. In this work, we demonstrated the direct growth of Gr on Al_0.5Ga_0.5N/sapphire templates by propane (C₃H₈) chemical vapor deposition at a temperature of 1350 °C. After optimization of the C₃H₈ flow rate, a uniform and conformal Gr coverage was achieved, which proved beneficial to prevent degradation of AlGaN morphology. X-ray photoemission spectroscopy revealed Ga loss and partial oxidation of Al in the near-surface AlGaN region. Such chemical modification of a ∼2 nm thick AlGaN surface region was confirmed by cross-sectional scanning transmission electron microscopy combined with electron energy loss spectroscopy, which also showed the presence of a bilayer of Gr with partial sp²/sp³ hybridization. Raman spectra indicated that the deposited Gr is nanocrystalline (with domain size ∼7 nm) and compressively strained. A Gr sheet resistance of ∼15.8 kΩ sq^-1 was evaluated by four-point-probe measurements, consistently with the nanocrystalline nature of these films. Furthermore, nanoscale resolution current mapping by conductive atomic force microscopy indicated local variations of the Gr carrier density at a mesoscopic scale, which can be ascribed to changes in the charge transfer from the substrate due to local oxidation of AlGaN or to the presence of Gr wrinkles.

Preparation of single-crystal metal substrates for the growth of high-quality two-dimensional materials

Recent advances on preparing single-crystal metals and their crucial roles in controlled growth of high-quality 2D materials are reviewed.

Recent Advances in Growth of Large-Sized 2D Single Crystals on Cu Substrates

Large-scale and high-quality 2D materials have been an emerging and promising choice for use in modern chemistry and physics owing to their fascinating property profile. The past few years have witnessed inspiringly progressing development in controlled fabrication of large-sized and single-crystal 2D materials. Among those production methods, chemical vapor deposition (CVD) has drawn the most attention because of its fine control over size and quality of 2D materials by modulating the growth conditions. Meanwhile, Cu has been widely accepted as the most popular catalyst due to its significant merit in growing monolayer 2D materials in the CVD process. Herein, very recent advances in preparing large-sized 2D single crystals on Cu substrates by CVD are presented. First, the unique features of Cu will be given in terms of ultralow precursor solubility and feasible surface engineering. Then, scaled growth of graphene and hexagonal boron nitride (h-BN) crystals on Cu substrates is demonstrated, wherein different kinds of Cu surfaces have been employed. Furthermore, the growth mechanism for the growth of 2D single crystals is exhibited, offering a guideline to elucidate the in-depth growth dynamics and kinetics. Finally, relevant issues for industrial-scale mass production of 2D single crystals are discussed and a promising future is expected.

Emerging Light-Emitting Materials for Photonic Integration

The arrival of the information explosion era is urging the development of large-bandwidth high-data-rate optical interconnection technology. Up to now, the biggest stumbling block in optical interconnections has been the lack of efficient light sources despite significant progress that has been made in germanium-on-silicon (Ge-on-Si) and III-V-on-silicon (III-V-on-Si) lasers. 2D materials and metal halide perovskites have attracted much attention in recent years, and exhibit distinctive advantages in the application of on-chip light emitters. Herein, this Progress Report reviews the recent progress made in light-emitting materials with a focus on new materials, i.e., 2D materials and metal halide perovskites. The report briefly introduces the current status of Ge-on-Si and III-V-on-Si lasers and discusses the advances of 2D and perovskite light-emitting materials for photonic integration, including their optical properties, preparation methods, as well as the light sources based on these materials. Finally, challenges and perspectives of these emerging materials on the way to the efficient light sources are discussed.

Integration of 3D nanographene into mesoporous germanium

Graphene is a key material of interest for the modification of physicochemical surface properties. However, its flat surface is a limitation for applications requiring a high specific surface area. This restriction may be overcome by integrating 2D materials in a 3D structure. Here, a strategy for the controlled synthesis of Graphene-Mesoporous Germanium (Gr-MP-Ge) nanomaterials is presented. Bipolar electrochemical etching and chemical vapor infiltration were employed, respectively, for the nanostructuration of Ge substrate and subsequent 3D nanographene coating. While Raman spectroscopy reveals a tunable domain size of nanographene with the treatment temperature, transmission electron microscopy data confirm that the crystallinity of Gr-MP-Ge is preserved. X-ray photoelectron spectroscopy indicates the non-covalent bonding of carbon to Ge for Gr-MP-Ge. State-of-the-art molecular dynamics modeling provides a deeper understanding of the synthesis process through the presence of radicals. The successful synthesis of these nanomaterials offers the integration of nanographene into a 3D structure with a high aspect ratio and light weight, thereby opening avenues to a variety of applications for this versatile nanomaterial.

The recent advancement of low-dimensional nanostructured materials for drug delivery and drug sensing application: A brief review

In this review article, we have presented a detailed analysis of the recent advancement of quantum mechanical calculations in the applications of the low-dimensional nanomaterials (LDNs) into biomedical fields like biosensors and drug delivery systems development. Biosensors play an essential role for many communities, e.g. law enforcing agencies to sense illicit drugs, medical communities to remove overdosed medications from the human and animal body etc. Besides, drug delivery systems are theoretically being proposed for many years and experimentally found to deliver the drug to the targeted sites by reducing the harmful side effects significantly. In current COVID-19 pandemic, biosensors can play significant roles, e.g. to remove experimental drugs during the human trials if they show any unwanted adverse effect etc. where the drug delivery systems can be potentially applied to reduce the side effects. But before proceeding to these noble and expensive translational research works, advanced theoretical calculations can provide the possible outcomes with considerable accuracy. Hence in this review article, we have analyzed how theoretical calculations can be used to investigate LDNs as potential biosensor devices or drug delivery systems. We have also made a very brief discussion on the properties of biosensors or drug delivery systems which should be investigated for the biomedical applications and how to calculate them theoretically. Finally, we have made a detailed analysis of a large number of recently published research works where theoretical calculations were used to propose different LDNs for bio-sensing and drug delivery applications.

Printable Free-Standing Hybrid Graphene/Dry-Spun Carbon Nanotube Films as Multifunctional Electrodes for Highly Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted immense attention owing to their outstanding power conversion efficiency (PCE). However, their counter electrodes are commonly produced by evaporating metals, such as Ag and Au, under high vacuum conditions, which make the PSCs costly, thereby limiting their large-scale production. In this study, a free-standing hybrid graphene/carbon nanotube film was carefully designed to replace noble metal PSC counter electrodes to reduce the cost and increase the stability of PSCs. A highly conductive and stable hybrid carbon thin film can be easily transferred to the various desired substrates by a simple rolling process. The PSCs with hybrid graphene/carbon nanotube films showed a high PCE of 15.36%. Moreover, the devices exhibited excellent stability and could retain 86% of their initial PCE after storage for 500 h in a high-moisture atmosphere (RH 50%). The outstanding stability of PCEs can be attributed to the efficient moisture blocking by the multilayered graphene/carbon nanotube present in the hybrid film. The thin, flexible, and easy-to-synthesize free-standing hybrid graphene/CNT film with high conductivity showed great potential for realizing the low-cost production of highly stable PSCs.

Direct transfer of electron microscopy samples to wetted carbon and graphene films via a support floatation block

•

Design of a sample-support transfer block for negative stain and cryo-EM.

•

Direct wetted transfer of 10 μL samples to carbon.

•

Direct wetted transfer of 10 μL samples to graphene.

•

Buffer exchange from 10 μL sample volumes in situ within the block.

Support films are commonly used during cryo-EM specimen preparation to both immobilise the sample and minimise the exposure of particles at the air-water interface. Here we report preparation protocols for carbon and graphene supported single particle electron microscopy samples using a novel 3D-printed sample transfer block to facilitate the direct, wetted, movement of both carbon and graphene supports from the substrate on which they were generated to small volumes (10 μL) of sample. These approaches are simple and inexpensive to implement, minimise hydrophobic contamination of the support films, and are widely applicable to single particle studies. Our approach also allows the direct exchange of the sample buffer on the support film in cases in which it is unsuitable for vitrification, e.g. for samples from centrifugal density gradients that help to preserve sample integrity.