Chemical structure, surface properties and biological activities of the biosurfactant produced by Pseudomonas aeruginosa LBI from soapstock

Rhamnolipid-induced shedding of flagellin from Pseudomonas aeruginosa provokes hBD-2 and IL-8 response in human keratinocytes

Several 'pathogen-associated molecular pattern' (PAMP) of the opportunistic pathogen Pseudomonas aeruginosa activate the innate immune system in epithelial cells. Particularly the production of antimicrobial peptides such as the human beta-defensin-2 (hBD-2) and proinflammatory cytokines as the interleukin (IL)-8 is boosted. In the present study culture supernatants of static grown P. aeruginosa were found to be potent hBD-2 and IL-8 inducers, indicating a soluble or shedded PAMP, comparable to that of heat-killed bacterial supernatants. In subsequent analyses this PAMP was identified as flagellin, the major structural protein of the flagella. Flagellin is known to be an immunostimulatory potent factor, but the mechanisms by which P. aeruginosa is able to remove flagellin from the flagella remain unknown. Here we provide evidence for the presence of a factor responsible for release of flagellin from the flagella. Purification of this factor and subsequent mass spectrometry analyses identified rhamnolipids as responsible agents. Our findings indicate that maybe upon adhesion to surfaces P. aeruginosa alters the outer membrane composition in a rhamnolipid-depending manner, thereby shedding flagellin from the flagella. In turn epithelial cells recognize flagellin and cause the synthesis of antimicrobial peptides as well as recruitment of inflammatory cells by induction of proinflammatory cytokines.

Evaluation of screening methods for demulsifying bacteria and characterization of lipopeptide bio-demulsifier produced by Alcaligenes sp

In this paper, surface tension measurement, oil-spreading test and blood-plate hemolysis test were attempted in the screening of demulsifying bacteria. After the comparison to the screening results obtained in demulsification test, 50 mN/m of surface tension of culture was proposed as a preliminary screening standard for potential demulsifying bacteria. For the identification of efficient demulsifying strains, surface tension level was set at 40 mN/m. The detected strains were further verified in demulsification test. Compared to using demulsification test alone as screening method, the proposed screening protocol would be more efficient. From the screening, a highly efficient demulsifying stain, S-XJ-1, was isolated from petroleum-contaminated soil and identified as Alcaligenes sp. by 16S rRNA gene and physiological test. It achieved 96.5% and 49.8% of emulsion breaking ratio in W/O and O/W kerosene emulsion within 24h, respectively, and also showed 95% of water separation ratio in oilfield petroleum emulsion within 2h. The bio-demulsifier was found to be cell-wall combined. After soxhlet extraction and purification through silicon-gel column, the bio-demulsifier was then identified as lipopeptide biosurfactant by TLC and FT-IR.

Analysis of rhamnolipid biosurfactants produced through submerged fermentation using orange fruit peelings as sole carbon source

The fermentative production of rhamnolipid biosurfactant from Pseudomonas aeruginosa MTCC 2297 was carried out by submerged fermentation using various cost-effective waste materials such as orange peelings, carrot peel waste, lime peelings, coconut oil cake, and banana waste. The orange peel was found to be the best substrate generating 9.18 g/l of rhamnolipid biosurfactant with a surface tension reduction up to 31.3 mN/m. The production was growth independent, and optimum conditions were standardized. The emulsifying activity was highest against kerosene (73.3%). Rhamnolipid components were purified and separated by ethyl acetate extraction, preparative silica gel column chromatography, high-performance liquid chromatography and thin-layer chromatography. The major rhamnolipid components were characterized, by fast atom bombardment mass spectrometry, as a mixture of dirhamnolipids and monorhamnolipids.

Characterization of rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20

Rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20 is viscous sticky oily yellowish brown liquid with a fruity odor. It showed solubility at aqueous pH > 4 with optimum solubility at pH 7-7.5 and freely soluble in ethyl acetate. This biosurfactant has a very high surface activity as it could lower the surface tension of water to 30 mN/m at about 13.4 mg/L, and it exhibited excellent stabilities at high temperatures (heating at 100 degrees C for 1 h and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and pH values (up to pH 13). The produced biosurfactant can be used in the crude form either as cell-free or cell-containing culture broth of the grown bacteria, since both preparations showed high emulsification indices ranged between 59% and 66% against kerosene, diesel, and motor oil. These characters make the test rhamnolipid a potential candidate for use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. High-performance thin-layer chromatography densitometry revealed that the extracted rhamnolipid contained the two most active rhamnolipid homologues dirhamno dilipidic rhamnolipid and monorhamno dilipidic rhamnolipid at 44% and 56%, respectively, as compared to 51% and 29.5%, respectively, in a standard rhamnolipid preparation. The nature and ratio of these two rhamnolipid homologues showed to be strain dependent rather than medium-component dependent.

Thermodynamic and structural changes associated with the interaction of a dirhamnolipid biosurfactant with bovine serum albumin

The interaction of a dirhamnolipid biosurfactant secreted by Pseudomonas aeruginosa with bovine serum albumin was studied by means of various physical techniques. Binding of the biosurfactant to bovine serum albumin was first characterized by isothermal titration calorimetry, showing that one or two molecules of dirhamnolipid, in the monomer state, bound to one molecule of the protein with high affinity. These results were confirmed by surface tension measurements in the absence and presence of bovine serum albumin. As seen by differential scanning calorimetry, dirhamnolipid shifted the temperature of the thermal unfolding of bovine serum albumin toward higher values, thus increasing the stability of the protein on heating. The impact of dirhamnolipid on the structure of the native protein was low, since most of the secondary structure remained unaffected upon interaction with the biosurfactant, as shown by FTIR spectroscopy. However, 2D correlation infrared spectroscopy indicated that the sequence of temperature-induced structural changes in native bovine serum albumin was modified by the presence of the biosurfactant. The consequences of these results in relation to possible applications of these dirhamnolipid biosurfactants for protein studies are discussed.

Pseudomonas aeruginosa LBI production as an integrated process using the wastes from sunflower-oil refining as a substrate

Pseudomonas aeruginosa LBI produced surface active rhamnolipids when cultivated on waste from the sunflower-oil process under different conditions. These biosurfactants, which reduce the superficial and interfacial tensions between fluids, offer advantages over their chemical counterparts, especially because of their ecological acceptability. These molecules can be used in fields as diverse as chemical, pharmaceutical and petrochemical industries. In this work, we present the effect of C/N ratio on growth and production yield. The best production yields (Y P/S) were achieved for C/N ratios (in g/g) of 8/1 (0.22) and 6.4/1 (0.23). The product concentration was very satisfactory (7.3g/L) at C/N ratio of 8/1, especially when considering that the substrate was basically composed of wastes that would otherwise constitute an environmental disposal problem.

Anaerobic biodegradation of fluoranthene under methanogenic conditions in presence of surface-active compounds

Bacillus cereus isolated from municipal wastewater treatment plant was used as a model strain to assess the efficiency of two anionic surfactants, a chemical surfactant and a biosurfactant during fluoranthene biodegradation under anaerobic methanogenic conditions. The surfactants selected for the study were linear alkyl benzene sulphonates (LAS) and rhamnolipid-biosurfactant complex from Pseudomonas sp. PS-17. Biodegradation of fluoranthene was monitored by GC/MS for a period up to 12th day. No change in the fluoranthene concentration was registered after 7th day. The presence of LAS enhanced the cell growth as well as the fluoranthene biodegradation. The rhamnolipid-biosurfactant at both used concentrations inhibited the cell growth and had no effect on the biodegradation rate. It was shown that LAS did not affect the microbial cell permeability and its positive effect on fluoranthene biodegradation was most likely as a result of the increased fluoranthene solubility. The results indicate that LAS can be considered as a promising agent for facilitation of the process of anaerobic polycyclic aromatic hydrocarbons (PAH) biodegradation under methanogenic conditions.

Heterologous production of Pseudomonas aeruginosa EMS1 biosurfactant in Pseudomonas putida

A new bacterial strain isolated from activated sludge, identified as Pseudomonas aeruginosa EMS1, produced a biosurfactant when grown on acidified soybean oil as the sole carbon source. An optimum biosurfactant production of 5 g/L was obtained with the following medium composition: 2% acidified soybean oil, 0.3% NH4NO3, 0.03% KH2PO4, 0.03% K2HPO4, 0.02% MgSO4.7H2O and 0.025% CaCl2.2H2O, with shaking at 200 rpm for an incubation period of 100 h at 30 degrees C. The production of the biosurfactant was found to be a function of cell growth, with maximum production occurring during the exponential phase. Hemolysis of erythrocytes and thin-layer chromatography studies revealed that the secreted biosurfactant was rhamnolipid. To overcome the complex environmental regulation with respect to rhamnolipid biosynthesis, and to replace the opportunistic pathogen P. aeruginosa with a safe industrial strain, attempts were made to achieve rhamnolipid production in a heterologous host, Pseudomonas putida, using molecular cloning of rhlAB rhamnosyltransferase genes with the rhlRI quorum sensing system, assuming that a functional rhamnosyltransferase would catalyze the formation of rhamnosyl-6-hydroxydecanoyl-6-hydroxydecanoate (mono-rhamnolipid) in P. putida. It was shown that rhamnolipid can be produced in the heterologous strain, P. putida, when provided with the rhamnosyltransferase genes.

Characterization of surfactin produced by Bacillus subtilis isolate BS5

Physical and chromatographic characterization of the surfactin biosurfactant produced by Bacillus subtilis isolate BS5 has been conducted to study its potentiality for industrial application. The crude extract of test surfactin appeared as off-white to buff flake-like amorphous residue with bad odor similar to sour pomegranate. Test surfactin showed solubility in aqueous solution at pH>5 with optimum solubility at pH 8-8.5. It was also soluble in organic solvents like ethanol, acetone, methanol, butanol, chloroform, and dichloromethane. Surfactin crystals appeared rectangular with blunt corners and were arranged perpendicular to each other making a plus sign. Extracted surfactin showed high surface activity, as it could lower the surface tension of water from about 70 to 36 mN/m at approximately 15.6 mg/l. Moreover, test surfactin exhibited excellent stabilities at high temperatures (100 degrees C for up to 1 h at and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and over a wide range of pH (5-13). Test surfactin in the cell-free supernatant or crude culture broth forms showed high emulsification indices against kerosene (62.5% and 59%, respectively), diesel (62.5% and 66%, respectively), and motor oil (62% and 66%, respectively). These characters can effectively make test surfactin, in its crude forms, a potential candidate for the use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. Chromatographic characterization of test surfactin, using high-performance liquid chromatography technique, revealed that the extracted surfactin contained numerous isoforms, of which six were found in the standard surfactin preparation (Fluka). Additional peaks appeared in the test surfactin and not in the standard one. These peaks may correspond to new surfactin isoforms that may be present in the test surfactin produced by B. subtilis isolate BS5.

Structural and physicochemical characterization of crude biosurfactant produced by Pseudomonas aeruginosa SP4 isolated from petroleum-contaminated soil

Pseudomonas aeruginosa strain SP4, isolated from petroleum-contaminated soil in Thailand, was used to produce a biosurfactant from a nutrient broth with palm oil as the carbon source. The key components of the crude biosurfactant were fractionated by using HPLC-ELSD technique. With the use of ATR-FTIR spectroscopy, in combination with (1)H NMR and MS analyses, chemical structures of the fractionated components of the crude biosurfactant were identified as rhamnolipid species. When compared to synthetic surfactants, including Pluronic F-68, which is a triblock nonionic surfactant containing poly(ethylene oxide) and poly(propylene oxide), and sodium dodecyl sulfate, the crude biosurfactant showed comparable physicochemical properties, in terms of the surface activities. The crude biosurfactant reduced the surface tension of pure water to 29.0 mN/m with a critical micelle concentration of approximately 200 mg/l, and it exhibited good thermal and pH stability. The crude biosurfactant also formed stable water-in-oil microemulsions with crude oil and various types of vegetable oils, but not with short-chain hydrocarbons.

Mass spectrometry analysis of surface tension reducing substances produced by a pah-degrading Pseudomonas citronellolis strain

In this work we investigated the structure of the iron-stimulated surface tension reducing substances produced by P. citronellolis 222A isolated from a 17-years old landfarming used for sludge treatment in petrochemical industries and oil refinery. Its mass spectrum differs from P. aeruginosa spectrum, indicating that the surface tension reducing substances produced by P. citronellolis can be a new kind of biosurfactant.

Antimicrobial potential of a lipopeptide biosurfactant derived from a marine Bacillus circulans

AIMS

To isolate the biologically active fraction of the lipopeptide biosurfactant produced by a marine Bacillus circulans and study its antimicrobial potentials.

METHODS AND RESULTS

The marine isolate B. circulans was cultivated in glucose mineral salts medium and the crude biosurfactant was isolated by chemical isolation method. The crude biosurfactants were solvent extracted with methanol and the methanol extract was subjected to reverse phase high-performance liquid chromatography (HPLC). The crude biosurfactants resolved into six major fractions in HPLC. The sixth HPLC fraction eluting at a retention time of 27.3 min showed the maximum surface tension-reducing property and reduced the surface tension of water from 72 mNm(-1) to 28 mNm(-1). Only this fraction was found to posses bioactivity and showed a pronounced antimicrobial action against a panel of Gram-positive and Gram-negative pathogenic and semi-pathogenic micro-organisms including a few multidrug-resistant (MDR) pathogenic clinical isolates. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of this antimicrobial fraction of the biosurfactant were determined for these test organisms. The biosurfactant was found to be active against Gram-negative bacteria such as Proteus vulgaris and Alcaligens faecalis at a concentration as low as 10 microg ml(-1). The biosurfactant was also active against methicillin-resistant Staphylococcus aureus (MRSA) and other MDR pathogenic strains. The chemical identity of this bioactive biosurfactant fraction was determined by post chromatographic detection using thin layer chromatography (TLC) and also by Fourier transform infrared (FTIR) spectroscopy. The antimicrobial HPLC fraction resolved as a single spot on TLC and showed positive reaction with ninhydrin, iodine and rhodamine-B reagents, indicating its lipopeptide nature. IR absorption by this fraction also showed similar and overlapping patterns with that of other lipopeptide biosurfactants such as surfactin and lichenysin, proving this biosurfactant fraction to be a lipopeptide. The biosurfactant did not show any haemolytic activity when tested on blood agar plates, unlike the lipopeptide biosurfactant surfactin produced by Bacillus subtilis.

CONCLUSIONS

The biosurfactant produced by marine B. circulans had a potent antimicrobial activity against Gram-positive and Gram-negative pathogenic and semi-pathogenic microbial strains including MDR strains. Only one of the HPLC fractions of the crude biosurfactants was responsible for its antimicrobial action. The antimicrobial lipopeptide biosurfactant fraction was also found to be nonhaemolytic in nature.

SIGNIFICANCE AND IMPACT OF THE STUDY

This work presents a nonhaemolytic lipopeptide biosurfactant produced by a marine micro-organism possessing a pronounced antimicrobial action against a wide range of bacteria. There is a high demand for new antimicrobial agents because of the increased resistance shown by pathogenic micro-organisms against the existing antimicrobial drugs. This study provides an insight into the search of new bioactive molecules from marine micro-organisms.

Rhamnolipids from the rhizosphere bacterium Pseudomonas sp. GRP(3) that reduces damping-off disease in Chilli and tomato nurseries

A detailed screening of bacterial isolates from the Central Himalayan region for plant growth promotion and antimycelial activity against Pythium and Phytophthora strains afforded seven isolates, of which three were particularly effective against the incidence of damping-off in field trials on chilli and tomato. In this investigation an initial spectroscopic survey of the methanolic extracts of the seven bacterial isolates showed complex mixtures except for Pseudomonas sp. GRP3, one of the most promising isolates on the basis of field studies. Strain GRP3 was selected for structural characterization of its secondary metabolites, particularly glycolipids. The extracellular secondary metabolites were enriched by Amberlite XAD-16 adsorber resin followed by separation and structural analysis using TLC, LC-MS, MS-MS, and NMR spectroscopy. Acquired data show the presence of a number of mono- and dirhamnolipids and include rhamnose (Rha)-C8-C10, Rha-C10-C8, Rha-C10-C10, Rha-C10-C12:1, Rha-C10-C12, Rha-Rha-C8-C10, Rha-Rha-C10-C10, Rha-Rha-C10-C10:1, Rha-Rha-C10-C12, Rha-Rha-C10-C12:1, Rha-Rha-C12-C12:1, and Rha-Rha-C12-C12 in strain GRP3. Since rhamnolipids are involved in the lysis of the plasma membrane of zoospores of fungi, application of such rhamnolipid-producing rhizobacteria could facilitate control of damping-off plant pathogens.

Rhamnolipid produced from agroindustrial wastes enhances hydrocarbon biodegradation in contaminated soil

A crude biosurfactant solution was produced by Pseudomonas aeruginosa growing on agroindustrial wastes as the substrate and used to study its effect on hydrocarbon biodegradation by the indigenous soil microflora under laboratory conditions. Two concentrations were studied at first and 1 mg of biosurfactant/g of soil showed to be the most efficient for the total petroleum hydrocarbon reduction, which reached 85% at the first 20 days in soil microcosms. Respirometric and microbial analyses showed that the biosurfactant added did not have toxic effects over the microbial population. The use of a biosurfactant for bioremediation has been limited because of its high cost production. Biosurfactants produced from cost-free by-products combines waste minimization with economic potential bioremediation process.

Aggregation behaviour of a dirhamnolipid biosurfactant secreted by Pseudomonas aeruginosa in aqueous media

The process of micelle formation, along with the formation of higher order aggregates, is described for a dirhamnolipid extracellular biosurfactant secreted by Pseudomonas aeruginosa. As determined by surface tension measurements, at pH 7.4 the CMC of dirhamnolipid is 0.110 mM, whereas at pH 4.0 it falls to 0.010 mM, indicating that the negatively charged diRL has a much higher CMC value than the neutral species. Centrifugation and dynamic light scattering measurements show formation of larger aggregates at concentrations above the CMC. These aggregates have been shown by electron microscopy to be mainly multilamellar vesicles of heterogeneous size. X-ray scattering gave a value of 32 A for the interlamellar repeat distance of these vesicles. Taking into account the experimental data, a molecular modelling of the dirhamnolipid moiety has been carried out, which details the size of the hydrophilic and hydrophobic portions, and suggests the possible intermolecular interactions responsible for the stabilisation of dirhamnolipid aggregates. The relevance of this aggregation behaviour is discussed with respect to the molecular basis of its activities.

Thermodynamics of the interaction of a dirhamnolipid biosurfactant secreted by Pseudomonas aeruginosa with phospholipid membranes

Rhamnolipids are bacterial biosurfactants produced by Pseudomonas spp. These compounds have been shown to present several interesting biological activities, restricting the growth of Bacillus subtilis and showing zoosporicidal activity on zoosporic phytopathogens. It has been suggested that the interaction with the membrane could ultimately be responsible for these actions. Therefore, it is of great interest to gain insight into the molecular mechanism of the interaction of purified rhamnolipids with the various phospholipid components of biological membranes. In this work, the critical micelle concentration (cmc) of a purified dirhamnolipid produced by Pseudomonas aeruginosa has been determined both by isothermal titration calorimetry and surface tension measurements. The partition coefficients from water to membranes of different compositions, as well as the corresponding thermodynamic parameters, have been determined by isothermal titration calorimetry measurements. The results indicate that dirhamnolipid membrane partitioning is an entropically driven process. The presence of cholesterol in the membrane decreases the partition of dirhamnolipid. On the other hand, phosphatidylethanolamine stimulates dirhamnolipid binding, whereas lysophosphatidylcholine opposes binding, suggesting that the biosurfactant behaves as an inverted-cone-shaped molecule. The values obtained for the cmc and the partition constant are considered in relation to the surfactant potency of dirhamnolipids.

Molecular and structural characterization of the biosurfactant produced by Pseudomonas aeruginosa DAUPE 614

Pseudomonas aeruginosa DAUPE 614 produced rhamnolipids (3.9gL(-1)) when cultivated on a medium containing glycerol and ammonium nitrate. These rhamnolipids reduced the surface tension of water to 27.3mNm(-1), with a critical micelle concentration of 13.9mgL(-1). The maximum emulsification index against toluene was 86.4%. The structure of the carbohydrate moiety of the glycolipid was determined by gas chromatography-mass spectroscopy (GC-MS) analysis allied to electrospray ionization mass spectrometry and nuclear magnetic resonance (NMR) 1D, 2D (13)C, (1)H spectroscopy. The hydroxyl fatty acids were analyzed by GC-MS as hydroxy-acetylated fatty acid methyl ester derivatives. The positions of the fatty acids in the lipid moiety were variable, with 6 mono-rhamnolipid homologues (Rha-C(10)-C(10); Rha-C(10)-C(8); Rha-C(8)-C(10); Rha-C(10)-C(12:1); Rha-C(12)-C(10); Rha-C(10)-C(12)) and 6 di-rhamnolipid homologues (Rha(2)-C(10)-C(10); Rha(2)-C(10)-C(8); Rha(2)-C(8)-C(10); Rha(2)-C(10)-C(12:1); Rha(2)-C(12)-C(10); Rha(2)-C(10)-C(12)). The ratio of Rha(2)-C(10)-C(10) to Rha-C(10)-C(10) was higher than has been reported in previous studies. Our methodology allowed us to distinguish between the isomeric pairs Rha-C(10)-C(8)/Rha-C(8)-C(10), Rha-C(10)-C(12)/Rha-C(12)-C(10), Rha(2)-C(10)-C(8)/Rha(2)-C(8)-C(10) and Rha(2)-C(12)-C(10)/Rha(2)-C(10)-C(12). For each isomeric pair, the congener with the shorter chain adjacent to the sugar was always more abundant than the congener with longer chain.

Determination of the acid dissociation constant of the biosurfactant monorhamnolipid in aqueous solution by potentiometric and spectroscopic methods

The acid dissociation constant in water for a monorhamnolipid mixture extracted from Pseudomonas aeruginosa ATCC 9027 has been determined using potentiometry and two spectroscopic approaches at concentrations below and above the critical micelle concentration (cmc). Potentiometric titrations resulted in pKa values ranging from 4.28 +/- 0.16 to 5.50 +/- 0.06 depending on concentration. 1H NMR spectrochemical titrations at concentrations below the cmc revealed a pKa value of 4.39 +/- 0.06. ATR-FT-IR spectrochemical titrations on solutions well above the cmc gave a pKa value of 4.84 +/- 0.05. The value of 4.28 for the free rhamnolipid molecule for concentrations below the cmc differs markedly from that reported previously. However, the pKa of 5.50 for surface-adsorbed and solution aggregates correlates closely to that previously reported. Differences in these pKa values are rationalized in terms of the pH- and concentration-dependent aggregation behavior of rhamnolipids in aqueous solution.

Physicochemical and surface-active properties of biosurfactant produced using molasses by a Pseudomonas aeruginosa mutant

Production of a microbial surfactant was studied by growing Pseudomonas aeruginosa EBN-8 mutant on varying concentrations (on the basis of total sugars) of clarified blackstrap molasses as a sole carbon and energy source with or without auxiliary synthetic nitrogen source in 250 mL shake flasks. The progress of fermentation process was monitored by measuring the production of metabolites, and surface-active and emulsification properties of the cell-free culture broth. The biosurfactant was isolated from the supernatant by acid precipitation followed by solvent extraction. The amount of rhamnolipids produced was determined by the orcinol method. The highest dry cell biomass (1.67 g/L) and rhamnolipid (1.45 g/L) yields were observed, at 96 h of incubation on 2% total sugars-based molasses amended with sodium nitrate (at C:N, 20:1) with the product yield related to dry cell biomass (YP/X, g/g) of 0.869, specific product formation rate (V, h(-1)) of 0.295 and volumetric productivity rate (PV, g/L/h) of 0.015. The surface tension of this culture medium dropped to 28.0 from 50.0 mN/m.

Chemical structures and biological activities of rhamnolipids produced by Pseudomonas aeruginosa B189 isolated from milk factory waste

The aim of this work was to study chemical structures and biological activities of rhamnolipids produced by Pseudomonas aeruginosa B189 isolated from milk factory waste. The culture produced two biosurfactants, a and b, which showed strong activity and were identified as L-rhamnopyranosyl-L-rhamnopyranosyl-beta-hydroxydecanoyl-beta-hydroxydecanoate or Rha-Rha C10-C10 and L-rhamnopyranosyl-L-rhamnopyranosyl-beta-hydroxydecanoyl-beta-hydroxydodecanoate or Rha-Rha C(10)-C(12), respectively. Both compounds exhibited higher surfactant activities tested by the drop collapse test than several artificial surfactants such as SDS and Tween 80. Rhamnolipid a showed significant antiproliferative activity against human breast cancer cell line (MCF-7) at minimum inhibitory concentration (MIC) at 6.25 microg/mL while rhamnolipid b showed MIC against insect cell line C6/36 at 50 microg/mL.

Effects of dirhamnolipid on the structural properties of phosphatidylcholine membranes

Rhamnolipids are biosurfactants produced by Pseudomonas aeruginosa which are well known for their potential industrial and environmental uses. Rhamnolipids have gained considerable interest in recent years due to their potential use in cosmetics and pharmaceutics. They also show broad biological activities and have potential applications as therapeutic agents. The amphiphilic nature of rhamnolipids points to the membrane as their hypothetical site of action. We have purified dirhamnolipid and studied its interaction with phosphatidylcholine membranes, using differential scanning calorimetry, X-ray diffraction and infrared spectroscopy. It has been found that dirhamnolipid greatly affects the gel to liquid crystalline phase transition of phosphatidylcholines, broadening and shifting the transition to lower temperatures. Dirhamnolipid increases the interlamellar repeat distance of phosphatidylcholines and reduces the long-range order of the multilamellar systems. The phospholipid hydrocarbon chain conformational disorder is increased and the packing of the phospholipid molecules is perturbed in the presence of dirhamnolipid. The above evidence supports the idea that dirhamnolipid intercalates into the phosphatidylcholine bilayers and produces structural perturbations which might affect the function of the membrane.

Towards commercial production of microbial surfactants

Biosurfactants or microbial surfactants are surface-active biomolecules that are produced by a variety of microorganisms. Biosurfactants have gained importance in the fields of enhanced oil recovery, environmental bioremediation, food processing and pharmaceuticals owing to their unique properties--higher biodegradability, lower toxicity, and effectiveness at extremes of temperature, pH and salinity. However, large-scale production of these molecules has not been realized because of low yields in production processes and high recovery and purification costs. This article describes some practical approaches that have been adopted to make the biosurfactant production process economically attractive: these include the use of cheaper raw materials, optimized and efficient bioprocesses and overproducing mutant and recombinant strains for obtaining maximum productivity. The application of these strategies in biosurfactant production processes, particularly those using hyper-producing recombinant strains in the optimally controlled environment of a bioreactor, might lead towards the successful commercial production of these valuable and versatile biomolecules in near future.

Interference in adhesion of bacteria and yeasts isolated from explanted voice prostheses to silicone rubber by rhamnolipid biosurfactants

AIMS

The effects and extent of adhesion of four different bacterial and two yeast strains isolated from explanted voice prostheses to silicone rubber with and without an adsorbed rhamnolipid biosurfactant layer obtained from Pseudomonasaeruginosa DS10-129 was studied.

METHODS AND RESULTS

The ability of rhamnolipid biosurfactant to inhibit adhesion of micro-organisms to silicone rubber was investigated in a parallel-plate flow chamber. The anti-adhesive activity of the biosurfactant at different concentrations was significant against all the strains and depended on the micro-organism tested. The results showed an effective reduction in the initial deposition rates, and the number of bacterial cells adhering after 4 h, for all micro-organisms tested at the 4 g l(-1) undiluted rhamnolipid solution. Maximum initial reduction of adhesion rate (an average of 66%) occurred for Streptococcus salivarius GB 24/9 and Candida tropicalis GB 9/9. The number of cells adhering after 4 h on silicone rubber conditioned with biosurfactant was reduced to 48% for Staphylococcus epidermidis GB 9/6, Strep. salivarius GB 24/9, Staphylococcus aureus GB 2/1 and C. tropicalis GB 9/9 in comparison to controls. Perfusing the flow chamber with biosurfactant containing solution followed by the passage of a liquid-air interface, to investigate detachment of micro-organisms adhering to silicone rubber, produced high detachment (96%) of adhered cells for all micro-organisms studied, except for Staph. aureus GB 2/1 (67%).

SIGNIFICANCE AND IMPACT OF THE STUDY

It is concluded that biosurfactant represent suitable compounds that should be considered in developing future strategies to prevent the microbial colonization of silicone rubber voice prostheses.

Physiological aspects. Part 1 in a series of papers devoted to surfactants in microbiology and biotechnology

Surfactants, both chemical and biological, are amphiphilic compounds which can reduce surface and interfacial tensions by accumulating at the interface of immiscible fluids and increase the solubility, mobility, bioavailability and subsequent biodegradation of hydrophobic or insoluble organic compounds. Investigations on their impacts on microbial activity have generally been limited in scope to the most common and best characterized surfactants. Recently a number of new biosurfactants have been described and accelerated advances in molecular and cellular biology are expected to expand our insights into the diversity of structures and applications of biosurfactants. Biosurfactants play an essential natural role in the swarming motility of microorganisms and participate in cellular physiological processes of signaling and differentiation as well as in biofilm formation. Biosurfactants also exhibit natural physiological roles in increasing bioavailability of hydrophobic molecules and can complex with heavy metals, and some also possess antimicrobial activity. Chemical- and indeed bio-surfactants may also be added exogenously to microbial systems to influence behaviour and/or activity, mimicking the latter effects of biosurfactants. They have been exploited in this way, for example as antimicrobial agents in disease control and to improve degradation of chemical contaminants. Chemical surfactants can interact with microbial proteins and can be manipulated to modify enzyme conformation in a manner that alters enzyme activity, stability and/or specificity. Both chemical- and bio-surfactants are potentially toxic to specific microbes and may be exploited as antimicrobial agents against plant, animal and human microbial pathogens. Because of the widespread use of chemical surfactants, their potential impacts on microbial communities in the environment are receiving considerable attention.

Production Kinetics and Tensioactive Characteristics of Biosurfactant from a Pseudomonas aeruginosa Mutant Grown on Waste Frying Oils

Various waste frying oils (WFOs) were evaluated as substrates for rhamnolipid production by Pseudomonas aeruginosa mutant EBN-8 in the presence or absence of rhamnolipid precursor, under single-/batch-fed conditions. Soybean WFO was the best substrate, producing 9.3 g rhamnolipid l(-1) with the specific product yield of 2.7 g g(-1) h, under batch-fed cultivation with the addition of rhamnolipid precursor. The surface tension of the cell-free culture broth (CFCB) was 29.1 mN m(-1 )and the interfacial tension against n-hexadecane was <1 mN m(-1). The hydrocarbon/ CFCB systems showed the relative emulsion stability to be in the range of 89.7-92.3.

Bacterial community changes in diesel-oil-contaminated soil microcosms biostimulated with Luria–Bertani medium or bioaugmented with a petroleum-degrading bacterium,Pseudomonas aeruginosa strain WatG

The microbial community structure of diesel-oil-contaminated soil microcosms biostimulated with Luria-Bertani medium (LB-BS) or bioaugmented with a petroleum-degrading bacterium, Pseudomonas aeruginosa strain WatG (WatG-BA), was investigated by denaturing gradient gel electrophoresis (DGGE) and by monitoring diesel oil degradation. The degradation in WatG-BA (64.0% +/- 4.2%) was higher than that in LB-BS (49.5% +/- 12.0%) during the first two weeks. The microbial community in WatG-BA, which was markedly dominated by strain WatG, was much simpler than that in LB-BS, where hydrocarbon degraders occurred after a lag of 3-7 days after the addition of diesel oil. The clustering profiles of the DGGE banding patterns of the two soil microcosms were only 12% similar. This difference is probably due to antibacterial substances, such as rhamnolipids, secreted by strain WatG.

Modulation of the physical properties of dielaidoylphosphatidylethanolamine membranes by a dirhamnolipid biosurfactant produced by Pseudomonas aeruginosa

Rhamnolipids are bacterial biosurfactants produced by Pseudomonas spp. These compounds have been shown to present several interesting biological activities, restricting the growth of Bacillus subtilis and showing zoosporicidal activity on zoosporic phytopathogens. It has been suggested that the interaction with the membrane could be the ultimate responsible for these actions. Therefore, it is of great interest to get insight into the molecular mechanism of the interaction of purified rhamnolipids with the various phospholipid components of biological membranes. In this paper we report on the phase behaviour of mixtures of dielaidoylphosphatidylethanolamine (DEPE) with a purified dirhamnolipid (DiRL) fraction from Pseudomonas aeruginosa, as studied by a number of physical techniques such as differential scanning calorimetry, FTIR, small angle X-ray (SAX) diffraction and dynamic light scattering. Our data indicate that the presence of DiRL counteracts the tendency of DEPE to form vesicular aggregates of large size, forming vesicles of smaller diameter which most probably have a lower lamellarity index. The partial phase diagram obtained from calorimetric data shows a complex behaviour with a solid-phase immiscibility. X-ray diffraction shows that DiRL has a bilayer stabilizing effect, impeding formation of the inverted hexagonal-HII phase of DEPE. The presented data are discussed focussing into how DiRL/DEPE interactions could help to explain the membrane perturbing activities of this biosurfactant.

Endotoxin-like properties of a rhamnolipid exotoxin from Burkholderia (Pseudomonas) plantarii: immune cell stimulation and biophysical characterization

Here we report on the purification, structural characterization, and biological activity of a glycolipid, 2-O-alpha-L-rhamnopyranosyl-alpha-L-rhamnopyranosyl-alpha(R)-3-hydroxytetradecanoyl-(R)-3-hydroxytetradecanoate (RL-2,2(14)) produced by Burkholderia (Pseudomonas) plantarii. RL-2,2(14) is structurally very similar to a rhamnolipid exotoxin from Pseudomonas aeruginosa and identical to the rhamnolipid of Burkholderia pseudomallei, the causative agent of melioidosis. Interestingly, RL-2,2(14) exhibits strong stimulatory activity on human mononuclear cells to produce tumor necrosis factor alpha, the overproduction of which is known to cause sepsis and the septic shock syndrome. Such a property has not been noted so far for rhamnolipid exotoxins, only for bacterial endotoxins (lipopolysaccharide, LPS). Consequently, we analyzed RL-2,2(14) with respect to its pathophysiological activities as a heat-stable extracellular toxin. Like LPS, the cell-stimulating activity of the rhamnolipid could be inhibited by incubation with polymyxin B. However, immune cell activation by RL-2,2(14) does nor occur via receptors that are involved in LPS (TLR4) or lipopeptide signaling (TLR2). Despite its completely different chemical structure, RL-2,2(14) exhibits a variety of endotoxin-related physicochemical characteristics, such as a cubic-inverted supramolecular structure. These data are in good agreement with our conformational concept of endotoxicity: intercalation of naturally originating virulence factors into the immune cell membrane leads to strong mechanical stress on integral proteins, eventually causing cell activation.

Improved production of biosurfactant by a Pseudomonas aeruginosa mutant using vegetable oil refinery wastes

Biosurfactant production by Pseudomonas aeruginosa EBN-8 mutant was studied in shake flasks on separate wastes from canola, soybean and corn oil refineries. Of the substrates tested, canola oil refinery waste (COD=20 g l(-1)) supplemented with sodium nitrate (at COD/N=20) showed the best microbial growth (4.50 g l(-1)) and rhamnolipid production (8.50 g l(-1)), at 10 d of incubation with the specific growth rate of 0.316 h(-1) and specific product yield of 0.597 g g(-1) h. Its cell-free supernatant showed the critical micelle dilution (CMD) of 150 and surface tension (ST) of 28.5 mN m(-1).

Biosurfactants: potential applications in medicine

The use and potential commercial application of biosurfactants in the medical field has increased during the past decade. Their antibacterial, antifungal and antiviral activities make them relevant molecules for applications in combating many diseases and as therapeutic agents. In addition, their role as anti-adhesive agents against several pathogens indicates their utility as suitable anti-adhesive coating agents for medical insertional materials leading to a reduction in a large number of hospital infections without the use of synthetic drugs and chemicals. This review looks at medicinal and therapeutic perspectives on biosurfactant applications.

Pseudomonas aeruginosa rhamnolipids disperse Bordetella bronchiseptica biofilms

We have previously reported that the respiratory pathogen Bordetella bronchiseptica can form biofilms in vitro. In this report, we demonstrate the disruption of B. bronchiseptica biofilms by rhamnolipids secreted from Pseudomonas aeruginosa. This suggests that biosurfactants such as rhamnolipids may be utilized as antimicrobial agents for removing Bordetella biofilms.

Rhamnolipid production by a novel thermophilic hydrocarbon-degrading Pseudomonas aeruginosa AP02-1

Thermophilic bacterial cultures were isolated from a hot spring environment on hydrocarbon containing mineral salts media. One strain identified as Pseudomonas aeruginosa AP02-1 was tested for the ability to utilize a range of hydrocarbons both n-alkanes and polycyclic aromatic hydrocarbons as sole carbon source. Strain AP02-1 had an optimum growth temperature of 45 degrees C and degraded 99% of crude oil 1% (v/v) and diesel oil 2% (v/v) when added to a basal mineral medium within 7 days of incubation. Surface activity measurements indicated that biosurfactants, mainly glycolipid in nature, were produced during the microbial growth on hydrocarbons as well as on both water-soluble and insoluble substrates. Mass spectrometry analysis showed different types of rhamnolipid production depending on the carbon substrate and culture conditions. Grown on glycerol, P. aeruginosa AP02-1 produced a mixture of ten rhamnolipid homologues, of which Rha-Rha-C10-C10 and Rha-C10-C10 were predominant. Rhamnolipid-containing culture broths reduced the surface tension to approximately 28 mN and gave stable emulsions with a number of hydrocarbons and remained effective after sterilization. Microscopic observations of the emulsions suggested that hydrophobic cells acted as emulsion-stabilizing agents.

Characterization of biochemical properties and biological activities of biosurfactants produced by Pseudomonas aeruginosa mucoid and non-mucoid strains isolated from hydrocarbon-contaminated soil samples

Biochemical and pharmacological properties of biosurfactants produced at 45 degrees C temperature by Pseudomonas aeruginosa mucoid (M) and non-mucoid (NM) strains, isolated from hydrocarbon-contaminated soil samples, were characterized. Both the strains secreted appreciable amount of biosurfactants (5.0-6.5 g/l), responsible for the reduction of surface tension of the medium from 68 to 29 +/- 0.5 mN/m post 96 h of growth. Maximum yield of biosurfactants was observed following the supplementation of NH(4)Cl and glycerol as nitrogenous source and carbon source, respectively. These thermostable biosurfactants exhibited strong emulsifying property and could release appreciable amount of oil from saturated sand-pack column. Pharmacological characterization of these biosurfactants revealed that they induced dose-dependent hemolysis and coagulation of platelet-poor plasma but were non-detrimental to chicken lung, liver, heart and kidney tissues. Our study has documented that biosurfactants from P. aeruginosa M and NM strains could be exploited for use in petroleum sectors as well in pharmaceutical industries.