A stick-like intelligent multicolor nano-sensor for the detection of tetracycline: The integration of nano-clay and carbon dots

Enhanced quenching efficiency of UiO-66-NH2 over UiO-66 to engineer high-performance fluorescence aptasensor for oxytetracycline monitoring

Oxytetracycline (OTC), a broad class of antibacterial medication, has been widely utilized in poultry husbandry and fish farming. However, the presence of OTC residues in the food has become a matter of great concern. These residues have the potential to induce the emergence and spread of bacterial resistance, which can have far-reaching consequences for public health. In this work, we focused on the comparison of the quenching efficiency of UiO-66 and its amino group-modified counterpart UiO-66-NH2, towards the fluorescence of nitrogen-doped graphene quantum dots (NGQDs) labeled aptamer (NGQDs-apt). It was found that UiO-66-NH2 demonstrated a more potent fluorescence quenching ability towards NGQDs-apt, as high as 98.8 %, compared to 69.7 % for UiO-66 without amino functionalization. This enhanced performance is attributed to the improved interaction between the amino groups on UiO-66-NH2 and the NGQDs-apt, facilitating more effective electron transfer. Consequently, UiO-66-NH2 was selected as the optimal quencher for the development of a highly sensitive aptasensor. This aptasensor demonstrates a quantitative detection range for OTC spanning from 0.001 to 200 μM with an exceptionally low detection limit of 0.25 nM, showing simplicity, accuracy, stability and great potential for antibiotic residue detection in food samples. This work addresses the urgent need to develop reliable methods for detecting OTC residues in food due to the potential of OTC to trigger bacterial resistance, which is crucial for food safety and public health.

Efficient and safe removal of free and casein-bound oxytetracycline from milk via pulsed electric field

Oxytetracycline (OTC) residues in milk spontaneously bind to casein, forming casein-OTC complexes that complicate their removal. This study assessed the degradation effect of pulsed electric field (PEF) treatment on OTC, with a particular focus on its protein-bound form. Casein-bound OTC was successfully prepared, and the effectiveness of PEF in removing casein-bound antibiotics was confirmed using DESI-MSI technology. Under optimal treatment conditions, the degradation rates of OTC in casein-free whey (86.30 % - 93.43 %) and milk (82.47 % - 90.31 %) showed no significant difference, further confirming that the removal efficacy of PEF on OTC was unaffected by casein binding. The degradation of OTC in both matrices followed the Hülsheger model. Four major degradation products were identified, involving three distinct pathways: epimerization, demethylation, and deamidation. Furthermore, cytotoxicity assays demonstrated that PEF treatment significantly reduced the overall toxicity of OTC in milk. This study provides an effective and safe strategy for removing OTC residues from milk.

Redox-Active Europium-Based MOFs Showing Ratiometric Fluorescence Sensing for the Anthrax Biomarker and Oxytetracycline, and Proton Conduction

Redox-active metal-organic frameworks have received increasing attention for potential applications in conductivity, sensing, catalysis, and magnetism. In this work, a novel redox-active europium-based metal-organic framework, {[(CH3)2NH2][Eu(BTA-2OH)(H2O)2]·2H2O}n (Eu-MOF, H4BTA-2OH = 2,3,5,6-tetrakis(p-carboxyphenyl)hydroquinone), is prepared and structurally characterized. The Eu-MOF is characterized by a well-defined structure featuring a two-dimensional channel along the c-axis. Eu-MOF can be converted into Eu-MOF-Ox through the oxidation of hydroquinone to benzoquinone, which can maintain structural stability and enhance fluorescence emission. Compared with Eu-MOF, Eu-MOF-Ox displays a more sensitive visual identification of 2,6-pyridine dicarboxylic acid (DPA) or oxytetracycline (OTC) as a ratiometric fluorescent sensor with lower detection limits of 0.013 and 0.071 μM, respectively. Fluorescent composite films and smartphone-based readout systems based on Eu-MOFs have been constructed to achieve rapid on-site quantification and testing. Moreover, Eu-MOF displays a more outstanding proton conductivity value of 1.16 × 10-2 S cm-1 than Eu-MOF-Ox (2.01 × 10-5 S cm-1) at 50 °C and 100% RH, indicating its high performance and potential application in the field of proton conduction. Therefore, the Eu-MOF is a potential bifunctional material for fluorescence sensing and proton conduction.

Tb doped carbon dots as a platform for fluorescence ratiometric and colorimetric sensor for deferasirox

Tb doped carbon dots (Tb-CDs) were synthesized by a simple hydrothermal method and the existence of Tb in the obtained CDs was confirmed by the several characterization methods. Tb-CDs were exploited to design a ratiometric fluorescence sensor for deferasirox (DFX) assay. CDs and Tb acted as reference and sensing probs in the sensor. In the presence of DFX, the fluorescence intensity of CDs remained unchanged, while Tb emission increased. The fluorescence ratio of Tb to CDs was proportional to the DFX concentration at the range of 0.1 to 2.5 µM. Additionally, the fluorescence color altered from blue (CDs emission) to green (Tb emission) with increasing DFX concentration. We employed this color variation to establish a smartphone based sensor for the DFX detection. The linear range of established sensor was 0.5-15 µM. The detection limit (3S) for the ratiometric and smartphone based sensor was calculated to be 0.08 and 0.4 µM, respectively. Both sensors were applied to measure DFX in human serum samples with satisfactory results.

Understanding Antibiotic Detection with Fluorescence Quantum Dots: A Review

The utilization of fluorescent quantum dots (FL QDs) has gained significant traction in the realm of antibiotic detection, owing to their exceptional FL properties and versatility. Various types of QDs have been tailored to exhibit superior FL characteristics, employing diverse capping agents such as metals, surfactants, polymers, and biomass to protect and stabilize their surfaces. In their evolution, FL QDs have demonstrated both "turn-off" and "turn-on" mechanisms in response to the presence of analytes, offering promising avenues for biosensing applications. This review article provides a comprehensive overview of the recent advancements in antibiotic detection utilizing FL QDs as biosensors. It encompasses an extensive examination of different types of FL QDs, including carbon, metal, and core-shell QDs, deployed for the detection of antibiotics. Furthermore, the synthesis methods employed for the fabrication of various FL QDs are elucidated, shedding light on the diverse approaches adopted in their preparation. Moreover, this review delves into the intricate sensing mechanisms underlying FL QDs-based antibiotic detection. Various mechanisms, such as photoinduced electron transfer, electron transfer, charge transfer, Forster resonance energy transfer, static quenching, dynamic quenching, inner filter effect, hydrogen bonding, and aggregation-induced emission, are discussed in detail. These mechanisms provide a robust scientific rationale for the detection of antibiotics using FL QDs, showcasing their potential for sensitive and selective sensing applications. Finally, the review addresses current challenges and offers perspectives on the future improvement of FL QDs in sensing applications. Insights into overcoming existing limitations and harnessing emerging technologies are provided, charting a course for the continued advancement of FL QDs-based biosensing platforms in the field of antibiotic detection.

An ingenious integrated metal-organic frameworks-based ratiometric sensing platform for efficient, sensitive and real-time detection of tetracyclines

Herein, we report a novel ratiometric nanoprobe (CDs@LZIF-8-Eu3+) that integrates fluorescent carbon dots (CDs) and Eu3+ on LZIF-8 via a one-pot stirring method. Tetracyclines (TCs) can create inner filter effect on CDs while simultaneously generating an antenna effect with Eu3+. The rapid and efficient adsorption capabilities of LZIF-8 enhance the probability of TCs interacting with the signal tags. Additionally, energy transfer between CDs and Eu3+ linked by LZIF-8, sensitizes the fluorescence changes, resulting in signal amplification. The nanoprobe exhibits reverse response signals with high sensitivity (2.94-4.46 ng/mL), rapid response (within 10 s), and visible color change (blue to red). The practicability of the CDs@LZIF-8-Eu3+ nanoprobe was demonstrated in food and environmental samples, accurately discriminating four TCs through principal component analysis. Furthermore, the first portable nanofibers mat based solid-phase fluorescence sensing platform was fabricated by an in-situ growth method. Combined with a smartphone-assisted device, rapid on-site monitoring of TCs can be achieved.

Versatile laccase-mimicking enzyme for dye decolorization and tetracyclines identification upon a colorimetric array sensor

In this study, the laccase-mimicking enzyme MnO2/Cu-BDC-His was synthesized by a facile procedure, and was applied in tetracycline antibiotics (TCs) identification and dye degradation. The MnO2/Cu-BDC-His nanozymes effectively recognized phenolic hydroxyl groups in TCs and catalyzed the generation of colored oxidation products with different characteristic absorbance peaks at 350 nm, 525 nm and 600 nm. Different TCs mixtures produced different absorbance intensities at the above wavelengths and exhibited cross-color responses. Consequently, a colorimetric array sensor for the simultaneous identification and detection of TCs with wavelength as the sensing element was established. Unlike the traditional "lock-and-key" detection mode, the array sensor enabled simultaneous multi-analyte detection and identification, which achieved the identification and quantification of mixed TCs in the range of 5-200 µM, providing a premise for its application in lake and soil water. Additionally, the MnO2/Cu-BDC-His nanozymes were also applied in colored dyes decolorization. Therefore, MnO2/Cu-BDC-His nanozymes provided a promising application in environmental monitoring.

Combining digital imaging and quantum dots for analytical purposes

This review provides a critical assessment of the most recent advances in digital imaging (DI) methods, applied for the development of analytical methodologies combining quantum dots (QDs). The state-of-the-art, treatment of data, instrumental considerations, software, sensing approaches, and optimization of the resulting methods are reported. Applications of the technology for the analysis of food and beverages, biomedically relevant analytes, drugs, environmental samples and forensic samples are also discussed. These examples aim to highlight the advantages of DI over traditional instrumentation, that in combination with QDs represents a powerful option for low-cost and on-site analyses. Moreover, some of these DI methods have been explored in the context of green chemistry principles, demonstrating a sustainable approach to modern analytical challenges.

A dual-mode ratiometric probe using europium-doped cyclen-functional carbon dots for fluorescent and point-of-care detection of tetracycline

The overuse of tetracycline (TC) has led to the accumulation of antibiotic residues in drinking water and animal products, which can consequently lead to bacteria resistance and chronic disease in humans. Urgently addressing the need for a rapid, user-friendly, and point-of-care test for TC detection. In this work, we use cyclen and citric acid to synthesise carbon dots (CDs) with a unique ring-shaped structure on their surface and combine them with europium (Eu3+) to form an Eu-CDs fluorescent probe. In the presence of TC in aqueous systems, the Eu-CDs probe emits two distinctive fluorescent signals: the stable blue emission from cyclen-modified CDs and the red emission from Eu3+,showing a proportional increase with TC concentration. The developed Eu-CDs probe demonstrates accurate and selective detection capabilities for TC class antibiotics among various interfering factors. The Eu-CDs probe exhibits excellent linearity within the concentration range of 0.04-2.4 µM and achieves an impressive detection limit of 2.7 nM. Moreover, point-of-care Eu-CDs test strips are designed, allowing convenient on-site TC analysis through the detection of a colour change from blue to red under a portable UV light. The results highlight the effectiveness of the proposed dual-mode ratiometric fluorescent Eu-CDs probe and test strips, offering a practical point-of-care testing strategy for real-world TC detection applications.

Enzyme-free biosensor utilizing chitosan-capped ZnS doped by Mn nanomaterials for tetracycline hydrochloride detection

Tetracycline hydrochloride is a widely used antibiotic for treating bacterial infections, but its misuse poses serious health risks. Therefore, it is crucial to accurately detect tetracycline in complex matrices. In this study, we propose a simple, enzyme-free absorbance biosensor for tetracycline detection based on the optical properties of chitosan-capped ZnS doped with Mn nanomaterials. The biosensor can detect tetracycline in a range from 13.1 pM to 72.2 pM, with the best detection limit being 2.13 pM in deionized water. It can also differentiate tetracycline from ampicillin, penicillin, cephalexin, amoxicillin, and glucose within the aforementioned range. Moreover, this novel sensor has proven reliable over time, and its performance has been demonstrated in tap water and milk. The results have the potential to revolutionize antibiotic monitoring in clinical and environmental settings, thus contributing to the global fight against antibiotic resistance.

Deep learning assisted logic gates for real-time identification of natural tetracycline antibiotics

The overuse and misuse of tetracycline (TCs) antibiotics, including tetracycline (TTC), oxytetracycline (OTC), doxycycline (DC), and chlortetracycline (CTC), pose a serious threat to human health. However, current rapid sensing platforms for tetracyclines can only quantify the total amount of TCs mixture, lacking real-time identification of individual components. To address this challenge, we integrated a deep learning strategy with fluorescence and colorimetry-based multi-mode logic gates in our self-designed smartphone-integrated toolbox for the real-time identification of natural TCs. Our ratiometric fluorescent probe (CD-Au NCs@ZIF-8) encapsulated carbon dots and Au NCs in ZIF-8 to prevent false negative or positive results. Additionally, our independently developed WeChat app enabled linear quantification of the four natural TCs using the fluorescence channels. The colorimetric channels were also utilized as outputs of logic gates to achieve real-time identification of the four individual natural tetracyclines. We anticipate this strategy could provide a new perspective for effective control of antibiotics.

Recent progress in lanthanide-based fluorescent nanomaterials for tetracycline detection and removal

Tetracycline (TC) has been widely used in clinical medicine and animal growth promotion due to its broad-spectrum antibacterial properties and affordable prices. Unfortunately, the high toxicity and difficult degradation rate of TC molecules make them easy to accumulate in the environment, which breaks the ecological balance and seriously threatens human health. Rapid and accurate detection of TC residue levels is important for ensuring water quality and food safety. Recently, fluorescence detection technology of TC residues has developed rapidly. Lanthanide nanomaterials, based on the high luminescence properties of lanthanide ions and the high matching with TC energy levels, are favored in the real-time trace detection of TC due to their advantages of high sensitivity, rapidity, and high selectivity. Therefore, they are considered potential substitutes for traditional detection methods. This review summarizes the synthesis strategy, TC response mechanism, removal mechanism, and applications in intelligent sensing. Finally, the development of lanthanide nanomaterials for TC fluorescence detection and removal is reasonably summarized and prospected. This review provides a reference for the establishment of a method for the accurate determination of TC content in complex food matrices.

Construction of nitrogen-doped carbon dots-based fluorescence probe for rapid, efficient and sensitive detection of chlortetracycline

Antibiotics are widely used in clinical medicine due to their excellent antibacterial abilities. As typical emerging pollutants, their misuse can lead to excess antibiotics entering the environment, causing antimicrobial resistance and leading to serious health problems via food chain. Herein, a nano-fluorescent probe based on nitrogen-doped carbon dots (N-CDs) was constructed for the sensitive detection of chlortetracycline (CTC). N-CDs with stable fluorescence were synthesized by hydrothermal method using alizarin red and melamine as raw materials. The N-CDs exhibited significant independence to excitation wavelength. The fluorescence of N-CDs was significantly quenched by CTC ascribing to the fluorescence resonance energy transfer mechanism. The concentration of N-CDs, solution pH and incubation time were optimized to obtain the optimal detection parameters. Under optimal conditions, CTC exhibited excellent linearity over the range of 20-1200 μg/L, and the detection limit was 8.74 μg/L. The method was validated with actual water samples and achieved satisfied spiked recoveries of 97.6-102.6%. Therefore, the proposed method has significant application value in the detection of CTC in waters.

Eu3+-based InP/ZnS quantum dot fluorescence platform for multi-color and sensitive visualization of tetracycline

A turn-on type ratiometric fluorescence sensing system of blue quantum dot Eu-MPA-InP/ZnS was established for multi-color visualization determination of tetracycline (TC). Mercaptopropionic acid (MPA)-capped InP/ZnS quantum dots (MPA-InP/ZnS QDs) both modify the hydrophilicity of InP/ZnS QDs and serve as a scaffold for coordinating of Eu3+ ions. The blue fluorescence of Eu-MPA-InP/ZnS at 478 nm is reduced by the TC through the inner filter effect (IFE) under a single excitation wavelength of 365 nm. Rich colour gradients and a highly discriminative colour change were features of this multicolour response to TC, which allowed visual quantification of TC in a dose-dependent manner. Furthermore, by cross-linking Eu-MPA-InP/ZnS with agarose (Aga.), a mouldable Eu-MPA-InP/ZnS@Aga 96-well gel sensing device was designed to serve as a handheld sensor for on-site detection of TC. This probe expands the use of InP QDs in analytical sensing and has been effectively applied to the visual detection of tetracycline in milk and the environment.

A novel ratiometric sensor for fluorimetric and visual dual-mode detection of Al3+ in environmental water based on the target-regulated formation of Eu MOFs

Herein, a novel ratiometric sensor for fluorimetric and smartphone-assisted visual detection of Al3+ in environmental water was developed based on the target-regulated formation of Eu metal-organic frameworks (Eu MOFs). By employing 2-[4-(2-hydroxyethyl) piperazin-1-yl] ethanesulfonic acid (Hepes), Eu3+ and tetracycline (TC) as raw materials, Eu MOFs with red emission were facilely synthesized through the coordination of Eu3+ with Hepes and TC. However, upon the introduction of Al3+, a higher affinity of TC towards Al3+ resulted in the formation of a TC-Al3+ complex with green fluorescence and inhibited the generation of Eu MOFs. This led to an increase in green fluorescence and a decrease in red fluorescence accompanied by the fluorescence color of the solution changing from red to green under the illumination of the UV lamp. Thus, a ratiometric sensor for fluorimetric and the smartphone-assisted visual detection of Al3+ was established. The ratiometric sensor exhibited high sensitivity for Al3+ detection with a detection limit of 0.14 μM for fluorescence detection and 1.21 μM for visual detection. Additionally, the proposed strategy was successfully applied to detect Al3+ in the environmental water samples with satisfactory results, indicating great application prospects for environmental monitoring.

Lateral flow assemblies and allied application of carbon quantum dots derived from cigarette tobacco in biosensing, anticounterfeiting and fluorescent films: Theoretical and experimental overview

The bio-sensing activity of fluorescence based nanoprobes is one of the most significant aspects to scrutinize the analytical pursuance in modern security and lateral flow assays. Herein, potent transmogrification of waste cigarette tobacco into fluorescent carbon quantum dots (CQDs) has been achieved by calcination approach. The waste transformation to CQDs holds diverse benefits, comprising high quantum yield, low toxicity and scale up synthesis. The developed CQDs were able to identify tetracycline with phenomenal selectivity and sensitivity through fluorescence based method. The sensing mechanism was fully explored using Density Functional Theory (DFT) and Molecular docking studies. Governing features comprising tetracycline concentration, interfering studies, and real water analysis on the identification of tetracycline were also investigated. Along with, the prepared CQDs act as colorimetric probe, facilitating the detection of tetracycline with the naked eye. The lateral flow device was constructed for the on-site detection of tetracycline in real water samples. To the best of our knowledge, the present work represents a novel approach to designing CQDs and demonstrates their significant potential for application in anticounterfeiting measures and lateral flow devices. This work holds significant prospective as the prepared CQDs was fully utilized to its maximum usage in developing films and fluorescent anti-counterfeiting applications. Concisely, current work opens up distinctive opportunities for rapid on-site, real-time and visualized surveillance of tetracycline using CQDs prepared with a quite simple green approach.

Aggregation-induced emission carbon dots as Al3+-mediated nanoaggregate probe for rapid and selective detection of tetracycline

Worldwide abuse of tetracycline (TC) seriously threatens environmental safety and human health. Metal-TC complexes formed by residual TC in the environment can also contribute to the spread of antibiotic resistance. Therefore, monitoring of TC residues is still required. Here, we report novel aggregation-induced emission carbon dots (AIE-Cdots) as nanoaggregate probes for the rapid and selective detection of TC residue. Riboflavin precursors with rotational functional groups led to the development of AIE-Cdots. The aggregation of AIE-Cdots was induced selectively for Al3+, amplifying the fluorescence signals owing to the restricted rotation of the side chains on the AIE-Cdot surface. The fluorescence signal of such Al3+-mediated nanoaggregates (Al3+-NAs) was further triggered by the structural fixation of TC at the Al3+ active sites, suggesting the formation of TC-coordinated Al3+-NAs. A linear correlation was observed in the TC concentration range of 0-10 μM with a detection limit of 42 nM. In addition, the strong Al3+ binding affinity of AIE-Cdots produced similar NAs and enhanced fluorescence signals in Al3+-TC mixtures. These AIE-Cdots-based nanoplatforms have a rapid response, good selectivity, and reliable accuracy for detecting TC or aluminum complexes, meeting the requirements for hazardous substance monitoring and removal in environmental applications.

Portable luminescent fiber- and glove-based nanosensor for multicolor visual detection of tetracycline in food samples

An intelligent fluorescent nanoprobe (lignite-CDs-Eu) was constructed by an effective and facile method based on lignite-derived carbon dots (CDs) and lanthanide europium ions (Eu3+), which exhibited high sensitivity, low detection limit (13.35 nM) and visual color variation (from blue to red) under ultraviolet light towards tetracycline (TC) detection. Significantly, portable and economical sensors were developed using lignite-CDs-Eu immobilized fiber material of filter paper and wearable glove with the aid of color extracting and image processing application (APP) in the smartphone. Facile, fast and real-time visual detection of TC in food samples was realized. Moreover, logic gate circuit was also designed to achieve intelligent and semi-quantitative inspection of TC. To some extent, this study extended the cross-application of intelligent computer software in food analytical science, and provided a certain reference for the development of small portable detection sensors which were suitable for convenience and non-professional use in daily life.

Smartphone-integrated ratiometric sensing strategy for on-line quantitation of tetracycline based on functionalized g-C3N4/Eu electrospun film

On-line quantitation of tetracycline (TC) is significant to ensure environmental health and food security. Hence, a novel smartphone-integrated ratiometric sensing platform for on-line quantitative analysis of TC was designed. A CitNa-functionalized g-C3N4/Eu3+ (g-C3N4/CitNa/Eu) composites with blue and red dual-emissive feature were fabricated as dual indicators for shielding background interference, enhancing anti-interference capability. The fluorescent response (F620/F450) ratio and TC concentration demonstrated good linear relationship ranged from 0.0 to 100.0 μM with a detection limit of 1.96 nM. Furthermore, the combination of g-C3N4/CitNa/Eu and polyacrylonitrile polymers forming electrospun film was achieved via electrospinning method. Smartphone-integrated ratiometric sensing platform was developed based on the fluorescent color of electrospun film from blue to light red with TC. This solid sensing platform achieved excellent sensitivity with a detection limit of 7.42 nM. Combining the solid ratiometric fluorescent film with smartphone reader provides a potential way for on-line quantitation of TC in food and other fields.

Novel Enzyme-Assisted Recycle Amplification Strategy for Tetracycline Detection Based on Oxidized Single-Walled Carbon Nanohorns

In this study, oxidized single-walled carbon nanohorns (oxSWCNHs) were prepared using nitric acid oxidation and subsequently combined with 3'6-carboxyfluorescein through charge transfer to prepare fluorescent probes. These oxSWCNHs were used to quench fluorogen signals at short distances and dissociate ssDNA using cryonase enzymes. We established a method for rapidly detecting tetracycline (TC) in complex samples based on the amplification of cryonase enzyme signals. After optimizing the experimental conditions, our method showed a detection limit of 5.05 ng/mL, with good specificity. This method was used to determine the TC content in complex samples, yielding a recovery rate of 90.0-103.3%. This result validated the efficacy of our method in detecting TC content within complex samples.

A paper-based ratiometric fluorescence sensor based on carbon dots modified with Eu3+ for the selective detection of tetracycline in seafood aquaculture water

Paper-based ratiometric fluorescence sensors are normally prepared using two or more types of fluorescent materials on a paper chip for simple, low-cost and fast detection. However, the choice of multi-step and one-step modifications on the paper chip affects the analytical performance. Herein, a novel paper-based dual-emission ratiometric fluorescence sensor was designed for the selective detection of tetracycline (TC). Carbon dots (CDs) modified with Eu3+ were combined with a sealed paper-based microfluidic chip by two methods: one-step grafting of CDs-Eu3+ on paper and step-by-step grafting of CDs and Eu3+ on paper. The analytical performance was studied and optimized respectively. The red fluorescence of Eu3+ at 450 nm is enhanced and the blue fluorescence of CDs at 617 nm is quenched by energy transfer in the presence of TC. Under optimal conditions, TC is selectively determined in the linear range from 0.1 μM to 100 μM with a detection limit of 0.03 μM by the step-by-step grafting method. In addition, the sealed paper chip could effectively prevent pollution and volatilization from the reagent. This technique has been used to analyze TC in seafood aquaculture water with satisfactory results.

Fluorescence sensor based on optimized quantum yield manganese-carbon polymer dots and smartphone-integrated sensing platform for tetracycline detection

The one-step synthesis of Mn-doped carbon quantum dots (Mn-CPDs) with a high quantum yield (QY = 45%) is reported using the microwave-assisted method. Subsequently, Mn-CPDs were successfully combined with Eu3+ ions to construct an Eu3+@Mn-CPDs fluorescence sensor. The presence of tetracycline (TC) induced a transition of fluorescence emission from blue (434 nm) to red (618 nm), and a robust linear relationship was observed between the ratio of F618 nm / F434 nm and the TC concentration (5 - 50 nmol/L), with a limit of detection (LOD) of 5.76 nmol/L. The underlying mechanism of Eu3+@Mn-CPDs and TC sensing is unveiled as a synergistic effect involving inner filter effect (IFE) and concurrent interactions. Notably, the smartphone-integrated sensing platform based on Eu3+@Mn-CPDs enables rapid and quantitative TC detection within a short time (< 30 s) by monitoring fluorescence color changes, achieving high-detection sensitivities (with a LOD of 6.18 nmol/L). This versatile and efficient sensing platform demonstrates its potential for the determination of TC concentrations in milk, honey, and tap water samples.

Fluorescent and smartphone imaging detection of tetracycline residues based on luminescent europium ion-functionalized the regular octahedral UiO-66-NH2

Antibiotic residues cause extensive damage to food security, thus arousing serious concerns. Hence, rapid and sensitive detection of antibiotic residues is crucial to food safety. This study aimed to propose a portable, visual, intelligent and rapid method for tetracycline detection. We developed a ratiometric fluorescent sensor based on the Eu3+-functionalized regular octahedral UiO-66-NH2 material. The developed sensor could quantify tetracycline in the concentration range of 0.5-200 μM with a detection limit as low as 0.2 μM under the optimum conditions. Furthermore, the analytical results obtained using the designed sensor in the actual samples were basically consistent with those obtained using high-performance liquid chromatography. Based on these achievements, a smartphone application-integrated fluorescent testing paper was designed for facile, intelligent, and visual detection of tetracycline. The integrated portable sensor not only saved cost and time for testing but also provided a forward-looking approach to fast, sensitive detection of antibiotic residues.

Triple-Emission Single Sensing Element-Enabled Ratiometric Fluorescent Array Identification of Multiple Antibiotics

Given that intricate toxicological profiles exist among different antibiotics and pose serious threats to the environment and human health, synchronous analysis of multiple residues becomes crucial. Sensor arrays show potential to achieve the above purpose, but it is challenging to develop easy-to-use and high-sensitivity tools because the state-of-the-art arrays often require more than one recognition unit and are monosignal dependent. Here we exquisitely designed a fluorescent nanoprobe (2-aminoterephthalic acid-anchored CdTe quantum dots with Eu3+ coordination, CdTe-ATPA-Eu3+) featuring triple emissions at the same excitation as the only element to fabricate a luminescent sensor array with ratiometric calculations for identifying multiple antibiotics. By taking tetracycline, chlortetracycline, doxycycline, oxytetracycline, penicillin G, and sulfamethoxazole as models, the six species exhibited distinguishable motivation or/and quenching impacts on the three emissions of CdTe-ATPA-Eu3+, which were employed as indicators to perform the ratiometric logical operation and further combined with pattern recognition analysis for multitarget determination. Evidently, such a design exhibits two advances: (1) with the triple-emission probe as the sole receptor requiring neither internal nor external adjustments, the fabricated array acts as an extremely facile tool for multianalyte detection; (2) the ratiometric calculations offer excellent sensitivity and reliability for high-performance determination. Consequently, accurate identification and quantification of individual antibiotics and their combinations at various levels were verified in both laboratory and practical matrices. Our work provides a new tool for simultaneously detecting multiple antibiotics, and it will inspire the development of advanced sensor arrays for multitarget analysis.

Zinc-doped carbon quantum dots-based ratiometric fluorescence probe for rapid, specific, and visual determination of tetracycline hydrochloride

In this work, a rapid, specific, and visual ratiometric fluorescence probe was constructed for tetracycline hydrochloride (TCH) determination based on zinc-doped carbon quantum dots (Zn-CDs). In the presence of TCH, the blue fluorescence at 440 nm originating from Zn-CDs was quenched, and the green fluorescence at 515 nm stemming from TCH was enhanced. The inner filter effect (IFE) and the chelation between Zn and tetracycline are the main mechanisms for the conversion of spectra. The spectrum and color change completed and stabilized within 1 min, indicating the possibility of real-time detection of TCH. The detection range for TCH is 0.1-50 μM, and the low detection limit is 61.1 nM. In addition, Zn-CDs-based test strips were successfully applied to direct visual identification of TCH in actual samples of river water and milk, indicating the possibility of their practical application.

Fluorescence determination of the total amount of tetracyclines by a flavonol-based supramolecular sensor

Tetracyclines (TCs) are a group of broad-spectrum antibiotics against multiplying microorganisms yet with several adverse effects on humans. Since all types of TCs have the similar chemical skeleton and mechanism of action, quantification of total amount of TCs in the environment was of particular importance. To date, dozens of fluorescent probes have been reported for TCs detection, but only very few of them enabled detection of total TCs. In this study, we report a novel supramolecular sensor constructed by human serum albumin as the recognition moiety and a flavonol fluorophore as the indicator. Under the 370 nm UV excitation, this sensor exhibits the rapid response (5 s), acceptable sensitivity (limit of detection ∼ 0.58 μM), long dynamic detection range (0-20 μM), prominent specificity, and excellent anti-interference properties for analysis of total TCs. The mechanism was carefully validated using 1H NMR, fluorescence titration experiments, molecular docking, and mass spectrometry. We expect this work can inspire more sensor design for TCs quantification.

Fluorescence switch based on NIR-emitting carbon dots revealing high selectivity in the rapid response and bioimaging of oxytetracycline

The abuse of antibiotics has led to serious environmental pollution and the emergence of drug-resistant bacteria surpassing the replacement rate of antibiotics. Herein, near-infrared fluorescent carbon dots (NIR-CDs) were developed to meet the requirements for oxytetracycline (OTC) detection in food and water samples (milk, honey, and lake water) with a detection limit of 0.112 μM. These NIR-CDs, possessing excellent water-solubility, deep tissue penetration ability, and tunable optical properties, exhibit maximum emission at 790 nm (NIR-I window). Unlike traditional CDs, this novel NIR-CDs nanoprobe provides a dual response in the presence of OTC (quenching and bathochromic shifting), without obvious interference from other existing biomolecules and metal ions. Additionally, these NIR-CDs exhibit excellent photostability and multi-resistance under UV irradiation, exceptional pH stability (pH 6-12), reliable long-time exposure, and durability in ionic (NaCl) environments. Moreover, NIR-CDs and NIR-CDs@OTC are nontoxic and were successfully utilized for cell-imaging applications in normal (NIH3T3) and cancer cells (HeLa).

Dual-functional molecularly imprinted doped carbon dot based on metal-organic frameworks for tetracycline adsorption and determination

A carbon dot (CD) was prepared by using tryptophan as a single carbon source and demonstrated its good selective fluorescence quenching effect on tetracycline (TC). The modified metal-organic frameworks (MOF) NH2-MIL-101 was chosen as matrix, doped with CD, molecularly imprinted polymer (MIP) prepared with TC as the template, and finally CD-MOF-MIP complexes (CD@MIP) was synthesized. For comparison, MIP were also prepared without CD as well as non-imprinted polymers and their ability was tested, respectively. CD@MIP is a nanomaterial with bright fluorescence under the irradiation of ordinary UV equipment (λ = 360 nm), which has a fast and stable fluorescence quenching for TC and a good linear relationship for TC in the concentration range 0-400 μmol L-1. The quantum yield of CD@MIP was 12.75% and the 3σ limit of detection (LOD) for CD@MIP was 0.59 μmol L-1. The maximum adsorption capacity of CD@MIP reached 304.6 mg g-1 and the adsorption equilibrium was reached after about 75 min. The adsorption of CD@MIP to tetracycline spiked in milk samples reached 90.0 mg g-1 within 2 h, which was much higher than that of NIP (48.4 mg g-1) under the same conditions, as demonstrated by high performance liquid chromatography (HPLC). The results obtained showed that CD@MIP combined the high adsorption capacity of MOF, the specific adsorption of molecular imprinting and the fluorescence properties of CD, can determine and rapidly removeTC in the environment.

Preparation and application of carbon quantum dot fluorescent probes combined with rare earth ions

Globally, antibiotic abuse, organic contamination, and excessive heavy metal ion pollution pose serious threats to human health. In this case, ratiometric fluorescent probes can eliminate the errors caused by environmental factors and provide more accurate detection results than single-emission intensity nanoprobes. Accordingly, based on the excellent biocompatibility and abundant surface functional groups of carbon quantum dots (CQDs) and the properties of large Stokes shifts and narrow emission bands of rare earth ions (RE3+), RE-CQD fluorescent probes have attracted widespread attention. Herein, firstly we review the combination of carbon quantum dots with rare earth ions (rare earth complexes) using various functionalization approaches to improve the defects of rare earth complexes and realize the functionalization of carbon quantum dots and their applications in many fields, such as biology and environmental science. In addition, we classify the methods for the synthesis of RE-CQD hybrids into three groups according to the different binding modes of the RE and CQDs, including doping, covalent grafting, and direct coordination. The excellent properties of these fluorescent probes are also briefly described. Finally, a comprehensive overview of the important applications of RE-CQD fluorescent probes in the fields of public safety sensing, chemical sensing, biomedical sensing, temperature sensing, and pH sensing is presented. In this review, the recent research progress in the field of ratiometric fluorescence sensing based on carbon quantum dots and rare earth ions is summarized and an outlook on the future development of RE-CQD fluorescent probes regarding their construction and potential applications is provided.

Effect of microplastics on the degradation of tetracycline in a soil microbial electric field

The degradation of organic pollutants and the adsorption of organic pollutants onto microplastics (MPs) in the environment have recently been intensively studied, but the effects of biocurrents, which are widespread in various soil environments, on the environmental behavior of MPs and antibiotic pollutants have not been reported. In this study, it was found that polylactic acid (PLA) and polyvinyl chloride (PVC) MPs accelerated the mineralization of humic substances in microbial electrochemical systems (MESs). After tetracycline (TC) was introduced into the MESs, the internal resistance of the soil MESs decreased. Additionally, the presence of MPs enhanced the charge output of the soil MESs by 40% (PLA+TC) and 18% (PVC+TC) compared with a control group without MPs (424 C). The loss in MP mass decreased after TC was added, suggesting a promotion of TC degradation rather than MP degradation for charge output. MPs altered the distribution of the highest occupied molecular orbitals and lowest unoccupied molecular orbitals of TC molecules and reduced the energy barrier for the TC hydrolysis reaction. The microbial community of the plastisphere exhibited a greater ability to degrade xenobiotics than the soil microbial community, indicating that MPs were hotspots for TC degradation. This study provides the first glimpse into the influence of MPs on the degradation of TC in MESs, laying a theoretical and methodological foundation for the systematic evaluation of the potential risks of environmental pollutants in the future.

Electrospun nanofiber-based indicatorpaper sensing platform for fluorescence and visualization detection of norfloxacin

Norfloxacin (NOR) residues in water pose a serious threat to human health via the food chain, necessitating the development of a rapid on-site antibiotic detection technique. In this work, we utilize electrostatic spinning technology that combines polyacrylonitrile (PAN) fibers and adenosine triphosphate (ATP)-rare earth metal Tb3+ complexes (ATP/Tb) to construct a new ternary film-based sensor for sensitive, quick, and convenient field testing of NOR in water. The operating mechanism is that the ternary system produces gradually enhanced bright green fluorescence at increasing concentrations of NOR. The unique fluorescence property of the ternary systems is attributed to the use of ATP, rather than the commonly used adenosine monophosphate (AMP), to coordinate with Tb3+, which avoided the possible fluorescence quenching from competitive water binding. Benefiting from the PAN nanofiber's superior stability, acid, and alkali resistance, and flexibility as support, the ternary system exhibited a good linear response to NOR in a wide dynamic range of 0.04-30 μM at the detection limit of 16 nM. Additionally, the combination of a smartphone color recognition app allows for quick on-scene NOR detection. This film sensing strategy is instructive for the development of smart and portable sensing platforms for real-time detection of analytes such as antibiotics, pesticide residues, and hazardous materials in water bodies.

An indirect competitive assay-based method for the sensitive determination of tetracycline residue using a real-time fluorescence-based quantitative polymerase chain reaction

Tetracycline (TC) is an effective antibiotic used to treat humans and livestock, but its inappropriate use imposes toxic effects, including pollution, on environmental ecology and food. Currently, sensitive, accurate, and cost-effective methods that can detect lower concentrations of TC residues in environmental and food samples are needed. In this study, a novel indirect competitive assay-based aptamer method was developed for detecting TC residues through signal amplification by real-time fluorescence-based quantitative polymerase chain reaction. The response surface methodology was introduced to optimize the optimal concentrations (influencing factors) of the three types of single-stranded DNA in the competitive assay process. The optimal conditions for the three types of ssDNA were 112 nM for the specific aptamer of TC (Apt40), 115 nM for the signal DNA, and 83 nM for the DNA catcher. As expected, under optimal conditions, the Ct value was linearly related to the logarithm of TC concentration. The calibration curve equation was Ct = -0.34516 log[TC] + 9.9345 (R2 = 0.998) in the range of 10-3-103 ng mL-1, and the limit of detection was 7.02 × 10-5 ng mL-1. The new method was effectively applied to detect TC residues in wastewater, honey, and milk samples. It achieved an average recovery rate of 101.19% with a small variation of 5.16%. The validation was carried out using an enzyme-linked immunosorbent assay. This approach demonstrates high sensitivity and selectivity, making it well suited for detecting leftover antibiotics in food when using suitable aptamers.

Two birds with one stone: Ratiometric sensing platform overcoming cross-interference for multiple-scenario detection and accurate discrimination of tetracycline analogs

Environmental pollution caused by tetracycline antibiotics (TCs) is a major concern for public health worldwide. Trace detection and reliable discrimination of tetracycline and its analogs are consequently essential to determine the distribution characteristics of various tetracycline family members. Here, a dual-response sensor was constructed by integrating the fluorescence emission of fluorescein isothiocyanate (FITC) doped SiO2 and Eu3+. A portable Lab-on-Paper device is further fabricated through probe immobilization, which allows convenient visual detection of tetracycline using a smartphone. In addition, for the coexistence of multiple tetracycline analogs, dimensionality reduction via principal component analysis is applied to the spectra, realizing accurate differentiation of the four most widely used tetracycline analogs (tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DOX)). The dual-response nanoplatform enabled a wide-gamut color variation crossing from green to red, with limit of detection (LOD) of 2.9 nM and 89.8 nM for spectrometer- and paper-based sensors, respectively. Analytical performance was examined in multiple real samples, including food, environmental, and biological settings, confirming robust environmental adaptability and resistance. Compared to previous TC sensors, this method has several notable improvements, including improved ecological safety, accessibility, reproducibility, practicality, and anti-cross-interference capacity. These results highlight the potential of the proposed "two birds with one stone" strategy, providing an integrated methodology for synchronous quantitative detection and derivative identification toward environmental contaminants.

Optical sensing of tetracycline concentration using a liquid crystal-based platform targeting the chelating properties of tetracycline

In this study, a liquid crystal (LC)-based assay for the real-time detection of tetracycline (Tc) was developed. The sensor was constructed by implementing an LC-based platform that utilized the chelating properties of Tc to target Tc metal ions. This design enabled Tc-dependent induction of changes in the optical image of the LC; these modifications could then be observed in real-time with the naked eye. The performance of the sensor in detecting Tc was investigated with various metal ions to identify the most effective metal ion for Tc detection. In addition, the selectivity of the sensor was evaluated using different antibiotics. A correlation between Tc concentration and the optical intensity of the LC optical images was established, which enabled the quantification of Tc concentrations. The proposed method can detect Tc concentrations with a detection limit as low as 2.67 pM. Tests were conducted on milk, honey, and serum samples, which demonstrated that the proposed assay is highly accurate and reliable. The high sensitivity and selectivity of the proposed method make it a promising tool for real-time Tc detection, with potential applications in fields ranging from biomedical research to agriculture.

A sensitive multicolor fluorescence sensing strategy for chlorotetracycline based on bovine serum albumin-stabilized copper nanocluster

Fluorescent probes with on-site visual detection function have received extensive attention in the detection of chlortetracycline (CTC), which was widely used in aquaculture and animal husbandry. Copper nanoclusters (Cu NCs) with excellent optical properties were prepared using bovine serum albumin (BSA) as a template, and a multicolor fluorescence strategy based on BSA-stabilized Cu NCs (BSA-Cu NCs) for detecting CTC was proposed. BSA-Cu NCs had a red emission at 640 nm. After the addition of CTC, the red emission of BSA-Cu NCs gradually decreased for internal filtering effect, while the green emission of CTC was significantly enhanced under the sensitization of BSA. This simple sensing process can be achieved in real time by directly mixing the target sample with BSA-Cu NCs, and the detection limit (LOD) of the system for CTC was 12.01 nM. Based on this sensing strategy, a fluorescence film sensing detection platform was constructed to achieve ultra-fast detection of CTC within 30 s. This work provided a fluorescent film sensor with the advantages of portability, ultra-fast and low cost, which provided a feasible alternative for on-site ultra-fast screening of CTC.

Fabrication and optimization of paper chips from calcinated Fe-MOFs for rapid and in situ visual detection of tetracyclines in water environments

Antibiotics such as tetracyclines (TCs) have become a major threat to ecosystem safety and human health, as their abuse has caused the occurrence and proliferation of antibiotic-resistant bacteria and genes. Currently, there is still a lack of convenient in situ methods for the detection and monitoring of TC pollution in actual water systems. This research reports a paper chip based on the complexation of iron-based metal organic frameworks (Fe-MOFs) and TCs for rapid and in situ visual detection of representative oxytetracycline (OTC) pollution in water environments. The optimized complexation sample NH₂-MIL-101(Fe)- 350 obtained by calcination at 350 °C exhibited the highest catalytic activity and was then used for paper chip fabrication by printing and surface modification. Notably, the paper chip demonstrated a detection limit as low as 17.11 nmol L^-1 and good practicability in reclaimed water, aquaculture wastewater, and surface water systems, with OTC recovery rates of 90.6-111.4%. More importantly, the presence of dissolved oxygen (9.13-12.7 mg L^-1), chemical oxygen demand (0.52-12.1 mg L^-1), humic acid (< 10 mg L^-1), Ca²⁺, Cl^-, and HPO₄^2- (< 0.5 mol L^-1) had negligible interference on the detection of TCs by the paper chip. Therefore, this work has developed a promising method for rapid and in situ visual monitoring of TC pollution in actual water environments.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

Glutamic acid-capped iron oxide quantum dots as fluorescent nanoprobe for tetracycline in urine

The fabrication of iron oxide quantum dots (IO-QDs) modified with glutamic acid (Glu) under controllable conditions is reported. The IO-QDs have been characterized by transmission electron microscopy, spectrofluorometry, powder X-ray diffraction, vibrating sample magnetometry, UV-Vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy. The IO-QDs exhibited good stability towards irradiation, temperature elevations, and ionic strength, and the quantum yield (QY) of IO-QDs was calculated to be 11.91 ± 0.09%. The IO-QDs were furtherly measured at an excitation wavelength of 330 nm with emission maxima at 402 nm, which were employed to detect tetracycline (TCy) antibiotics, including tetracycline (TCy), chlortetracycline (CTCy), demeclocycline (DmCy), and oxytetracycline (OTCy) in biological samples. The results indicated that TCy, CTCy, DmCy, and OTCy in urine samples show a dynamic working range between 0.01 and 80.0 μM; 0.01 and 1.0 μM; 0.01 and 10 μM; and 0.04 and 1.0 μM, respectively, with detection limits of 7.69 nM, 120.23 nM, 18.20 nM, and 67.74 nM, respectively. The detection was not interfered with by the auto-fluorescence from the matrices. In addition, the obtained recovery in real urine samples suggested that the developed method could be used in practical applications. Therefore, the current study has prospect to develop an easy, fast, eco-friendly, and efficient new sensing method for detecting tetracycline antibiotics in biological samples.

Intelligent visual detection of OTC enabled by a multicolor fluorescence nanoprobe: Europium complex functionalized carbon dots

It is of great significance to realize ultra-sensitive and visual detection of oxytetracycline (OTC) residues, especially for public health and environmental safety. In this study, a multicolor fluorescence sensing platform (CDs-Cit-Eu) for OTC detection was constructed by using rare earth europium complex functionalized carbon dots (CDs). The blue-emitting CDs (λ_em = 450 nm) prepared by one-step hydrothermal method using nannochloropsis were not only the scaffold of Eu³⁺ ion coordination, but also the recognition unit of OTC. After adding OTC to the multicolor fluorescent sensor, the emission intensity of CDs decreased slowly, and the emission intensity of Eu³⁺ ions (λ_em = 617 nm) enhanced significantly, accompanying by a significant color change of the nanoprobe from blue to red. The detection limit of the probe for OTC was calculated to be 3.5 nM, manifesting ultra-high sensitivity towards OTC detection. In addition, OTC detection in real samples (honey, lake water, tap water) was successfully achieved. Moreover, a semi-hydrophobic luminescent film SA/PVA/CDs-Cit-Eu was also prepared for OTC detection. With the help of smartphone color recognition APP, real-time intelligent detection of OTC was realized.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

A dual-signal fluorescent colorimetric tetracyclines sensor based on multicolor carbon dots as probes and smartphone-assisted visual assay

The widespread presence of tetracyclines in the environment has raised concerns about the potential risks to ecosystems and human health. The ratiometric fluorescence sensor for detecting tetracyclines was developed using europium-doped carbon dots (Eu-CDs) as probes under alkaline conditions. The sensing mechanism of sensor for tetracyclines was considered as inner filter effect (IFE), antenna effect (AE), and self-quenching effect (SQE). The sensor had a wide linear detection range than the reported europium ions-based tetracyclines sensors. The linear detection ranges of oxytetracycline (OTC), tetracycline (TC), doxycycline (DC) and chlorotetracycline (CTC) were respectively 0.00-603.75 μM, 0.00-623.82 μM, 0.00-594.61 μM and 0.00-601.54 μM, and the corresponding detection limits were respectively 9.50 nM, 15.80 nM, 10.40 nM and 90.30 nM. The smartphone with RGB Color Picker was further employed to analyze the concentration of tetracyclines, which provided a new method for visual tetracyclines detection. The application of Eu-CDs test paper was also explored, and the results showed that the Eu-CDs test paper has great potential application in the visual detection of tetracyclines. In addition, the accuracy of the established tetracyclines sensor was compared with that of the China national standard method by high-performance liquid chromatography (HPLC), and the results showed that the established method in this work has similar accuracy to the China national standard method. The sensor has been employed to detect tetracyclines in the actual samples with satisfactory results, which indicated that this method has promising applications in the real-time monitoring tetracyclines of food and environment.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

An ion-coordination hydrogel based sensor array for point-of-care identification and removal of multiple tetracyclines

Misuse and overuse of tetracycline antibiotics (TCs) brings serious issues to ecological environment, food safety and human health. It is urgent to develop unique platform for high efficient identification and removal of TCs. In the present investigation, an effective and simple fluorescence sensor array was constructed based on the interaction between metal ions (Eu³⁺ and Al³⁺) and antibiotics. Benefiting from the different affinities between the ions and TCs, the sensor array can identify TCs from other antibiotics, which also can further differentiating four kinds of TCs (OTC, CTC, TC and DOX) from each other via linear discriminant analysis (LDA) technique. Meanwhile, the sensor array performed well in quantitative analysis of single TC antibiotic and differentiation of TCs mixtures. More interestingly, Eu³⁺ and Al³⁺-doped sodium alginate/polyvinyl alcohol hydrogel beads (SA/Eu/PVA and SA/Al/PVA) were further constructed, which can not only identify the TCs but simultaneously remove the antibiotics with high efficiency. The investigation provided an instructive way for rapid detection and environment protection.

Novel preparation of red fluorescent carbon dots for tetracycline sensing and its application in trace determination

The controllable design of red-emitting carbon dots and further exploration of their application in the trace determination of environmental pollutants remains a tremendous challenge. Herein, the novel strategy for red fluorescent carbon dots (R-CDs) with a higher quantum yield of 58.9% was proposed by doping small-molecule urea into the bio-dye of resazurin for the first time, which can retain the luminophore of precursors and exhibit exceptional optical, advantageous reversibility and outstanding photostability. Importantly, the R-CDs exhibit a remarkable fluorescence reduction towards tetracyclines (TCs) accompanied by a noticeable color change of R-CDs solution from red to yellow, which can realize the trace detection of TCs at strelatively low levels, including tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC). The linear range of TC, CTC, and OTC are 3-40 μM, 4-50 μM, and 2-50 μM, and the corresponding detection limits are 38.5 nM, 64.6 nM, and 45.4 nM, respectively (S/N = 3). Furthermore, the R-CDs demonstrate sensitivity to the physiological pH in the linear range of 4.0-5.0 and 5.0-6.2 with a pKa of 5.61. As a multifunctional fluorescent sensor, R-CDs can provide a new perspective for the preparation of long-wavelength CDs, and further realize the trace determination of environmental pollutants.

Functional Micro-/Nanostructures in Agrofood Science: Precise Inspection, Hazard Elimination, and Potential Health Risks

Nanotechnology, biotechniques, and chemical engineering have arisen as new trends with significant impacts on agrofood science development. Advanced analytical techniques with high sensitivity, specificity, and automation based on micro-/nanomaterials for food hazard elimination have become leading research hotspots in agrofood science. Research progress in micro-/nanomaterials has provided a solid theoretical basis and technical support to solve problems in the industry. However, the rapid development of micro-/nanostructures has also raised concerns regarding potential risks to human health. This review presents the latest advances in the precise inspection and elimination of food hazards from micro-/nanomaterials and discusses the potential threats to human health posed by nanomaterials. The theoretical reference was provided for the application trend of micro-/nanomaterials in the field of agrofood science in the future.

Dual-ligand lanthanide metal-organic framework for ratiometric fluorescence detection of the anthrax biomarker dipicolinic acid

Dipicolinic acid (DPA) is a unique biomarker of Bacillus anthracis. Development of a simple, fast, sensitive and timely DPA detection method is of great importance and interest for preventing mass disease outbreaks and treatment of anthrax. In this work, a novel lanthanide-doped fluorescence probe was constructed by coordination of Eu³⁺ with bifunctional UiO-66-(COOH)₂-NH₂ MOFs materials for efficient monitoring DPA. UiO-66-(COOH)₂-NH₂ MOFs were prepared using Zr⁴⁺ as a metal node, 1,2,4,5-benzenetetracarboxylic acid (H₄BTC) and 2-aminoterephthalic acid (NH₂-BDC) as bridging ligand through a simple one-pot synthesis method. By virtue their abundant carboxyl groups, UiO-66-(COOH)₂-NH₂ can readily grasp Eu³⁺ to form UiO-66-(COOH)₂-NH₂/Eu with coordinated water molecules at Eu sites. Upon interaction with DPA molecules, the coordinated H₂O molecules were replaced by DPA molecules which transfer energy to Eu³⁺ in UiO-66-(COOH)₂-NH₂/Eu and sensitize Eu³⁺ luminescence. Meanwhile, DPA has a characteristic absorption band at 270 nm, which overlapped with the excitation spectrum of NH₂-BDC, allowing the fluorescence of UiO-66-(COOH)₂-NH₂/Eu at 453 nm to be greatly quenched by DPA through inner filter effect (IFE). Therefore, the rationally designed UiO-66-(COOH)₂-NH₂/Eu complex not only exhibits strong hydrophilicity and high dispersion, but also serves as ratiometric fluorescence sensing platform for monitoring DPA concentration. This sensing platform showed a satisfactory linear relationship from 0.2 μM to 40 μM with a limit of detection of 25.0 nM and a noticeable fluorescence color change from blue to red, holding a great promise in practical applications.

Recent Progress of Carbon Dots for Air Pollutants Detection and Photocatalytic Removal: Synthesis, Modifications, and Applications

Rapid industrialization has inevitably led to serious air pollution problems, thus it is urgent to develop detection and treatment technologies for qualitative and quantitative analysis and efficient removal of harmful pollutants. Notably, the employment of functional nanomaterials, in sensing and photocatalytic technologies, is promising to achieve efficient in situ detection and removal of gaseous pollutants. Among them, carbon dots (CDs) have shown significant potential due to their superior properties, such as controllable structures, easy surface modification, adjustable energy band, and excellent electron-transfer capacities. Moreover, their environmentally friendly preparation and efficient capture of solar energy provide a green option for sustainably addressing environmental problems. Here, recent advances in the rational design of CDs-based sensors and photocatalysts are highlighted. An overview of their applications in air pollutants detection and photocatalytic removal is presented, especially the diverse sensing and photocatalytic mechanisms of CDs are discussed. Finally, the challenges and perspectives are also provided, emphasizing the importance of synthetic mechanism investigation and rational design of structures.