Direct electron transfer for hemoglobin in biomembrane-like dimyristoyl phosphatidylcholine films on pyrolytic graphite electrodes

Early sex determination of Ginkgo biloba based on the differences in the electrocatalytic performance of extracted peroxidase

Ginkgo biloba is a dioecious plant. Male ginkgoes are mainly used in landscaping, while females are mainly used for fruit production. However, sex identification of ginkgo is a difficult task, especially at the seedling stage. In this work, we present for the first time the use of electrochemical techniques for the identification of ginkgo sex based on the differences in peroxides within male and female ginkgos. Graphene was used to concentrate peroxides in ginkgo extract, thereby improving electrochemical signal sensitivity. The electrochemical reduction of hydrogen peroxide catalyzed by peroxidase was used as a prob for sex determination in ginkgo. This electrochemical identification technique can be used not only for the analysis of adult ginkgo, but also successfully for the analysis of tissue culture seedlings and live seedlings. This electrochemical sensor has excellent discrimination ability due to the difference in peroxidase content in the leaves and petiole of ginkgo of different sexes. This electrochemical sensor allows for a rapid identification of the sex of ginkgo and has a very strong potential for field analysis.

Enhanced electrochemical sensing of dopamine in the presence of AA and UA using a curcumin functionalized gold nanoparticle modified electrode

In the present study, a electrochemical sensor for the determination of dopamine was developed with green synthesised gold nanoparticles using curcumin as a reducing and, functionalizing agent.

Hemoglobin becomes electroactive upon interaction with surface-protected Au nanoparticles

In this work, we report on the electrochemical behavior of bioconjugates prepared with gold nanoparticles (AuNP) capped with three different molecular layers (citrate anions, 6-mercaptopurine and ω-mercaptoundecanoic acid) and the protein hemoglobin (Hb). Freshly formed bioconjugates are deposited on a glassy carbon electrode and assayed for electroactivity. A pair of redox peaks with formal potential at -0.37V is obtained, in contrast with the free Hb protein that is inactive on the glassy carbon substrate. The redox response is typical for quasi-reversible processes allowing the determination of the electron transfer rate constant for the three bioconjugates. Additional evidence of the structural integrity of protein upon forming the bioconjugate is obtained by monitoring the electrochemical response of the Hb heme Fe(III)/Fe(II) redox couple as a function of solution pH. Moreover, the Hb forming the protein corona around the AuNPs show good electrocatalytic activity for the reduction of hydrogen peroxide and oxygen. It has been found that only the first layer of Hb surrounding the AuNPs are electroactive, although some part of the second layer also contribute, pointing to the role of the AuNP in the electrochemical response.

Electron Transfer of Myoglobin Immobilized in Au Electrodes Modified with a RAFT PMMA-Block-PDMAEMA Polymer

Myoglobin was immobilized with poly(methyl methacrylate)-block-poly[(2-dimethylamino)ethyl methacrylate]PMMA-block-PDMAEMA polymer synthesized by reversible addition-fragmentation chain transfer technique (RAFT). Cyclic voltammograms gave direct and slow quasireversible heterogeneous electron transfer kinetics between Mb-PMMA-block-PDMAEMA modified electrode and the redox center of the protein. The values for electron rate constant (Ks) and transfer coefficient (α) were0.055±0.01·s−1and0.81±0.08, respectively. The reduction potential determined as a function of temperature (293–328 K) revealed a value of reaction center entropy ofΔS0of351.3±0.0002 J·mol−1·K−1and enthalpy change of-76.8±0.1 kJ·mol−1, suggesting solvent effects and charge ionization atmosphere involved in the reaction parallel to hydrophobic interactions with the copolymer. The immobilized protein also exhibits an electrocatalytical response to reduction of hydrogen peroxide, with an apparentKmof114.7±58.7 μM. The overall results substantiate the design and use of RAFT polymers towards the development of third-generation biosensors.

Direct electrochemistry of hemoglobin immobilized on a functionalized multi-walled carbon nanotubes and gold nanoparticles nanocomplex-modified glassy carbon electrode

Direct electron transfer of hemoglobin (Hb) was realized by immobilizing Hb on a carboxyl functionalized multi-walled carbon nanotubes (FMWCNTs) and gold nanoparticles (AuNPs) nanocomplex-modified glassy carbon electrode. The ultraviolet-visible absorption spectrometry (UV-Vis), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) methods were utilized for additional characterization of the AuNPs and FMWCNTs. The cyclic voltammogram of the modified electrode has a pair of well-defined quasi-reversible redox peaks with a formal potential of −0.270 ± 0.002 V (vs. Ag/AgCl) at a scan rate of 0.05 V/s. The heterogeneous electron transfer constant (ks) was evaluated to be 4.0 ± 0.2 s⁻¹. The average surface concentration of electro-active Hb on the surface of the modified glassy carbon electrode was calculated to be 6.8 ± 0.3 × 10⁻¹⁰ mol cm⁻². The cathodic peak current of the modified electrode increased linearly with increasing concentration of hydrogen peroxide (from 0.05 nM to 1 nM) with a detection limit of 0.05 ± 0.01 nM. The apparent Michaelis-Menten constant (K_m^app) was calculated to be 0.85 ± 0.1 nM. Thus, the modified electrode could be applied as a third generation biosensor with high sensitivity, long-term stability and low detection limit.

Electro-enzymatic degradation of chlorpyrifos by immobilized hemoglobin

Electro-enzymatic processes, which are enzyme catalysis combined with electrochemical reactions, have been used in the degradation of many environment pollutants. For some pollutants, the catalytic mechanisms of the electrochemical-enzyme reaction are still poorly understood. In this paper, the degradation of chlorpyrifos by a combination of immobilized hemoglobin and in situ generated hydrogen peroxide is reported for the first time. Hemoglobin was immobilized on graphite felts to catalyze the removal of chlorpyrifos in an electrochemical-enzyme system. Under the optimal conditions, more than 98% of the chlorpyrifos was degraded. Furthermore, the degradation products of chlorpyrifos were also studied and identified using liquid chromatography-mass spectrometry analysis. The results suggest a possible degradation mechanism for chlorpyrifos with low power and high efficiency, reveal the feasibility of hemoglobin as a substitute for some expensive natural enzymes, and demonstrate the application of an electro-enzymatic process in the treatment of organophosphorus compounds in wastewater.

Electroenzymatic oxidation of bisphenol A (BPA) based on the hemoglobin (Hb) film in a membraneless electrochemical reactor

This paper presents a novel electroenzymatic method for the treatment of bisphenol A (BPA) in a membraneless electrochemical reactor. The electrochemical reactor was arranged with a stainless steel and an enzymatic film as anode and cathode, respectively. The enzymatic film was formed by immobilizing hemoglobin (Hb) on carbon fiber. In the membraneless electrochemical reactor, hydrogen peroxide (H(2)O(2)) was generated in situ in cathode and BPA was oxidated and removed by the combining Hb with H(2)O(2). The experimental conditions for electrogeneration of H(2)O(2) and electroremoval of BPA were optimized. Experimental results showed that in supplied voltage 2.4 V, pH 5.0 and oxygen flow rate 25 mL/min, the electrogeneration of H(2)O(2) and the electroenzymatic removal of BPA were highest. Under optimal operation conditions, the removal efficiency of BPA reached 50.7% in 120 min and then kept constant when further prolonging the period of reaction. Compared with electrochemical and biochemical methods, the removal of BPA through electroenzymatic method was comparatively favorable.

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/l-cysteine/gold colloid/nanoparticles Pt–chitosan composite film-modified platinum disk electrode

A hemoglobin (Hb)/gold colloid (nano-Au)/L-cysteine (L-cys)/nano-Au/nanoparticles Pt (nano-Pt)-chitosan (CHIT) composite film-modified platinum disk electrode (abbreviated to modified electrode) has been prepared to construct a biosensor for determination of H(2)O(2). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The morphologies of different composite film were investigated with scanning electron microscopy (SEM) and the element of composite film was investigated with X-ray photoelectron spectroscopy (XPS). Analytical parameters such as pH and temperature were also studied. The linear range for the determination of H(2)O(2) is 1.4 x 10(-7) to 6.6 x 10(-3)mol/L with a detection limit of 4.5 x 10(-8)mol/L (S/N=3). The sensor achieved 95% of the steady-state current within 10s. The sensor exhibited high sensitivity (17.62 microA/(mmol L)), selectivity and stability. The method is applied to the determination of H(2)O(2) with satisfactory results.

Composite films of lecithin and heme proteins with electrochemical and electrocatalytic activities

Functional composite films made from lecithin micelles and the two heme proteins of met-myoglobin (Mb) and met-hemoglobin (Hb) are reported in this paper. Proteins in functional composite films have much higher rates of electron transfer than proteins in solutions on carbon paste (CP) electrodes. Cyclic voltammograms (CVs) all give a pair of well-defined and quasi-reversible peaks, corresponding to the heme FeIII/FeII redox couple of proteins. Differential pulse voltammograms (DPVs) also show the same formal potential (E0') values of proteins under identical conditions. Electronic and vibrational spectra indicate that proteins in these films are not denatured, but their conformational differences from native states may exist. The E0' value for Mb in the lecithin film is found to be pH dependent. The Mb lecithin film can catalytically reduce O2 and H2O2, and its analytical application to H2O2 determination is established.

Direct electron transfer and bioelectrocatalysis of hemoglobin on nano-structural attapulgite clay-modified glassy carbon electrode

Direct electrochemistry of hemoglobin (Hb) on natural nano-structural attapulgite clay film-modified glassy carbon (GC) electrode was investigated. The interaction between Hb and attapulgite was examined using UV-vis, FTIR spectroscopy, and electrochemical methods. The immobilized Hb displayed a couple of well-defined and quasi-reversible redox peaks with the formal potential (E(0')) of about -0.366 V (versus SCE) in 0.1 M phosphate buffer solution of pH 7.0. The current was linearly dependent on the scan rate, indicating that the direct electrochemistry of Hb in that case was a surface-controlled electrode process. The formal potential changed linearly from pH 5.0 to 9.0 with a slope value of -48.2 mV/pH, which suggested that a proton transfer was accompanied with each electron transfer in the electrochemical reaction. The immobilized Hb exhibited excellent electrocatalytic activity for the reduction of hydrogen peroxide without the aid of an electron mediator. The electrocatalytic response showed a linear dependence on the H(2)O(2) concentration ranging from 5.4 x 10(-6) to 4.0 x 10(-4) M with the detection of 2.4 x 10(-6) M at a signal-to-noise ratio of 3. The apparent Michaelis-Menten constant K(M)(app) for the H(2)O(2) sensor was estimated to be 490 microM, showing a high affinity.

Studies on direct electron transfer and biocatalytic properties of hemoglobin in polyacrylonitrile matrix

The direct electrochemistry of hemoglobin (Hb) immobilized in polyacrylonitrile (PAN) modified glassy carbon electrode was described. The protein-PAN film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks for Hb Fe(III)/Fe(II) redox couple in a pH 7.0 phosphate buffer. The formal potential of Hb heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 5.0-9.0 with a slope of 54 mV pH(-1), which implied that a proton transfer was accompanied with each electron transfer in the electrochemical reaction. Position of Soret absorption band of Hb-PAN film suggested that the Hb kept its secondary structure similar to its native state in the PAN matrix. The Hb in PAN matrix acted as a biologic catalyst to catalyze the reduction of hydrogen peroxide. The electrocatalytic response showed a linear dependence on the H(2)O(2) concentration ranging from 8.3 x 10(-6) to 5 x 10(-4) mol L(-1) with a detection limit of 8.3 x 10(-6) mol L(-1) at 3 sigma. The apparent Michaelis-Menten constant K(M)(app) for H(2)O(2) sensor was estimated to be 0.9 mmol L(-1).

Assembly of layer-by-layer films of electroactive hemoglobin and surfactant didodecyldimethylammonium bromide

When a solid substrate with negative surface charges was placed in an aqueous didodecyldimethylammonium bromide (DDAB) vesicle dispersion, the cationic surfactant DDAB with two hydrocarbon chains could be assembled into the biomembrane-like tail-to-tail double-layer structure on the solid surface with the positively charged head groups toward outside, making the surface charge reverse from negative to positive. After the solid substrate with DDAB was immersed in a hemoglobin (Hb) solution at pH 9.0, the negatively charged Hb was adsorbed on the surface of DDAB layer by electrostatic attraction, forming a DDAB/Hb film. By repeating this adsorption cycle, the {DDAB/Hb}(n) layer-by-layer films were assembled on solid surfaces, which was confirmed by UV-vis spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV). The stable {DDAB/Hb}(n) films assembled on pyrolytic graphite (PG) electrodes showed two pairs of nearly reversible redox peaks at about -0.22 and -1.14 V vs SCE in pH 7.0 buffers, characteristic of the Hb heme Fe(III)/Fe(II) and Fe(II)/Fe(I) redox couples, respectively. The direct electrochemistry of Hb in the films could be used to electrocatalyze reduction of various substrates. UV-vis and IR spectroscopic results and comparison experiments with {DDAB/hemin}(n) films indicate that Hb in the {DDAB/Hb}(n) films essentially retains its native structure. Atomic force microscopy (AFM) was used to characterize the morphology of the films with different outermost layers.

Direct electrochemistry of hemoglobin in the hyaluronic acid films

Hemoglobin (Hb) in the hyaluronic acid (HA) was cast at pyrolytic graphite (PG) electrodes for researching its electrochemical and electrocatalytic properties. The formal potential and electron transfer rate constant of Hb on HA films were determined, and the stability of the films, the pH effect, and the influence of supporting electrolyte concentrations upon Hb electrochemistry on the films were investigated by cyclic voltammetry and square wave voltammetry. UV-Vis absorption and reflectance absorption infrared (RAIR) spectra showed that the protein on HA film retained near-native secondary structure. The stable Hb-HA/PG gave analytically useful electrochemical catalytic responses to hydrogen peroxide. Thus, the property of the HA film for sorption and retention of water maybe utilized to develop some new biosensors.

Hydrogen peroxide biosensor based on hemoglobin modified zirconia nanoparticles-grafted collagen matrix

A novel method for the immobilization of hemoglobin (Hb) and preparation of reagentless biosensor was proposed using a biocompatible non-toxic zirconia enhanced grafted collagen tri-helix scaffold. The formed membrane was characterized with UV-vis and FT-IR spectroscopy, scanning electron microscope and electrochemical methods. The Hb immobilized in the matrix showed excellent direct electrochemistry with an electron transfer rate constant of 6.46 s(-1) and electrocatalytic activity to the reduction of hydrogen peroxide. The apparent Michaelis-Menten constant for H(2)O(2) was 0.026 mM, showing good affinity. Based on the direct electrochemistry, a new biosensor for H(2)O(2) ranging from 0.8 to 132 microM was constructed. Owing to the porous structure and high enzyme loading of the matrix the biosensor exhibited low limit of detection of 0.12 microM at 3sigma, fast response less than 5 s and high sensitivity of 45.6 mA M(-1) cm(-2). The biosensor exhibited acceptable stability and reproducibility. ZrO(2)-grafted collagen provided a good matrix for protein immobilization and biosensing preparation. This method was useful for monitoring H(2)O(2) in practical samples with the satisfactory results.

Direct electrochemistry of hemoglobin in PHEA and its catalysis to H2O2

Hemoglobin (Hb) was immobilized on glassy carbon (GC) electrode by a kind of synthetic water-soluble polymer, poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide] (PHEA). A pair of well-defined and quasi-reversible cyclic voltammetric peaks was achieved, which reflected the direct electron-transfer of the Fe(III)/Fe(II) couple of Hb. The formal potential (E degrees'), the apparent coverage (Gamma(*)) and the electron-transfer rate constant (k(s)) were calculated by integrating cyclic voltammograms experimental data. Scanning electron microscopy (SEM) demonstrated the morphology of Hb-PHEA film very different from the Hb and PHEA films. Ultraviolet visible (UV-vis) spectroscopy showed Hb in PHEA film remained its secondary structure similar to the native state. In respect that the immobilized protein remained its biocatalytic activity to the reduction of hydrogen peroxide (H(2)O(2)), a kind of mediator-free biosensor for H(2)O(2) could be developed. The apparent Michaelis-Menten constant (K(m)(app)) was estimated to be 18.05 microM. The biosensor exhibited rapid electrochemical response and good stability. Furthermore, uric acid (UA), ascorbic acid (AA) and dopamine (DA) had little interferences with the amperometric signal of H(2)O(2), which provide the perspective of this H(2)O(2) sensor to be used in biological environments.

Hydroxyl-containing antimony oxide bromide nanorods combined with chitosan for biosensors

A hydroxyl-containing antimony oxide bromide (AOB) nanorods was synthesized by a hydrothermal method. TEM and SEM images showed that the as-prepared AOB nanorods were very copious with diameters of about 50 nm. The AOB nanorods could be easily combined with biopolymer chitosan (Chi) to form an organic-inorganic hybrid material, and a biocompatible, crack-free and porous Chi-AOB composite film could be readily obtained. Horseradish peroxidase (HRP) was chosen as a model protein to construct a reagentless mediator-free third-generation HRP biosensor. UV-visible and FTIR spectroscopy revealed that HRP entrapped in the composite film could retain its native secondary structure. A pair of stable and well-defined redox peaks of HRP with a formal potential of about -0.24 V (vs. Ag/AgCl) in a pH 7.0 phosphate-buffered solution (PBS) were obtained at the HRP-Chi-AOB composite film modified glassy carbon (GC) electrode. With advantages of organic-inorganic hybrid materials, dramatically facilitated direct electron transfer of HRP and excellent bioelectrocatalytic activity towards H(2)O(2) were demonstrated. The apparent Michaelis-Menten constant K(M)(app) was calculated to be 7.5mum, indicating that HRP entrapped in the composite film possessed high affinity to H(2)O(2) and exhibited high enzymatic activity. The prepared biosensor displayed good sensitivity and reproducibility, wide linear range, low detection limit, fast response and excellent long-term stability. The Chi-AOB composite film could be used efficiently for the entrapment of other redox-active proteins and may find wide potential applications in biosensors, biocatalysis, biomedical devices and bioelectronics.